git.oblomov.eu Git - linux-2.6/blob - drivers/hwmon/smsc47m1.c

   1 /*
   2     smsc47m1.c - Part of lm_sensors, Linux kernel modules
   3                  for hardware monitoring
   4
   5     Supports the SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x,
   6     LPC47M15x and LPC47M192 Super-I/O chips.
   7
   8     Copyright (C) 2002 Mark D. Studebaker <mdsxyz123@yahoo.com>
   9     Copyright (C) 2004 Jean Delvare <khali@linux-fr.org>
  10     Ported to Linux 2.6 by Gabriele Gorla <gorlik@yahoo.com>
  11                         and Jean Delvare
  12
  13     This program is free software; you can redistribute it and/or modify
  14     it under the terms of the GNU General Public License as published by
  15     the Free Software Foundation; either version 2 of the License, or
  16     (at your option) any later version.
  17
  18     This program is distributed in the hope that it will be useful,
  19     but WITHOUT ANY WARRANTY; without even the implied warranty of
  20     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  21     GNU General Public License for more details.
  22
  23     You should have received a copy of the GNU General Public License
  24     along with this program; if not, write to the Free Software
  25     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  26 */
  27
  28 #include <linux/module.h>
  29 #include <linux/slab.h>
  30 #include <linux/ioport.h>
  31 #include <linux/jiffies.h>
  32 #include <linux/i2c.h>
  33 #include <linux/i2c-isa.h>
  34 #include <linux/hwmon.h>
  35 #include <linux/err.h>
  36 #include <linux/init.h>
  37 #include <asm/io.h>
  38
  39 /* Address is autodetected, there is no default value */
  40 static unsigned short address;
  41
  42 /* Super-I/0 registers and commands */
  43
  44 #define REG     0x2e    /* The register to read/write */
  45 #define VAL     0x2f    /* The value to read/write */
  46
  47 static inline void
  48 superio_outb(int reg, int val)
  49 {
  50         outb(reg, REG);
  51         outb(val, VAL);
  52 }
  53
  54 static inline int
  55 superio_inb(int reg)
  56 {
  57         outb(reg, REG);
  58         return inb(VAL);
  59 }
  60
  61 /* logical device for fans is 0x0A */
  62 #define superio_select() superio_outb(0x07, 0x0A)
  63
  64 static inline void
  65 superio_enter(void)
  66 {
  67         outb(0x55, REG);
  68 }
  69
  70 static inline void
  71 superio_exit(void)
  72 {
  73         outb(0xAA, REG);
  74 }
  75
  76 #define SUPERIO_REG_ACT         0x30
  77 #define SUPERIO_REG_BASE        0x60
  78 #define SUPERIO_REG_DEVID       0x20
  79
  80 /* Logical device registers */
  81
  82 #define SMSC_EXTENT             0x80
  83
  84 /* nr is 0 or 1 in the macros below */
  85 #define SMSC47M1_REG_ALARM              0x04
  86 #define SMSC47M1_REG_TPIN(nr)           (0x34 - (nr))
  87 #define SMSC47M1_REG_PPIN(nr)           (0x36 - (nr))
  88 #define SMSC47M1_REG_PWM(nr)            (0x56 + (nr))
  89 #define SMSC47M1_REG_FANDIV             0x58
  90 #define SMSC47M1_REG_FAN(nr)            (0x59 + (nr))
  91 #define SMSC47M1_REG_FAN_PRELOAD(nr)    (0x5B + (nr))
  92
  93 #define MIN_FROM_REG(reg,div)           ((reg)>=192 ? 0 : \
  94                                          983040/((192-(reg))*(div)))
  95 #define FAN_FROM_REG(reg,div,preload)   ((reg)<=(preload) || (reg)==255 ? 0 : \
  96                                          983040/(((reg)-(preload))*(div)))
  97 #define DIV_FROM_REG(reg)               (1 << (reg))
  98 #define PWM_FROM_REG(reg)               (((reg) & 0x7E) << 1)
  99 #define PWM_EN_FROM_REG(reg)            ((~(reg)) & 0x01)
 100 #define PWM_TO_REG(reg)                 (((reg) >> 1) & 0x7E)
 101
 102 struct smsc47m1_data {
 103         struct i2c_client client;
 104         struct class_device *class_dev;
 105         struct semaphore lock;
 106
 107         struct semaphore update_lock;
 108         unsigned long last_updated;     /* In jiffies */
 109
 110         u8 fan[2];              /* Register value */
 111         u8 fan_preload[2];      /* Register value */
 112         u8 fan_div[2];          /* Register encoding, shifted right */
 113         u8 alarms;              /* Register encoding */
 114         u8 pwm[2];              /* Register value (bit 7 is enable) */
 115 };
 116
 117
 118 static int smsc47m1_detect(struct i2c_adapter *adapter);
 119 static int smsc47m1_detach_client(struct i2c_client *client);
 120
 121 static int smsc47m1_read_value(struct i2c_client *client, u8 reg);
 122 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value);
 123
 124 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 125                 int init);
 126
 127
 128 static struct i2c_driver smsc47m1_driver = {
 129         .owner          = THIS_MODULE,
 130         .name           = "smsc47m1",
 131         .attach_adapter = smsc47m1_detect,
 132         .detach_client  = smsc47m1_detach_client,
 133 };
 134
 135 /* nr is 0 or 1 in the callback functions below */
 136
 137 static ssize_t get_fan(struct device *dev, char *buf, int nr)
 138 {
 139         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 140         /* This chip (stupidly) stops monitoring fan speed if PWM is
 141            enabled and duty cycle is 0%. This is fine if the monitoring
 142            and control concern the same fan, but troublesome if they are
 143            not (which could as well happen). */
 144         int rpm = (data->pwm[nr] & 0x7F) == 0x00 ? 0 :
 145                   FAN_FROM_REG(data->fan[nr],
 146                                DIV_FROM_REG(data->fan_div[nr]),
 147                                data->fan_preload[nr]);
 148         return sprintf(buf, "%d\n", rpm);
 149 }
 150
 151 static ssize_t get_fan_min(struct device *dev, char *buf, int nr)
 152 {
 153         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 154         int rpm = MIN_FROM_REG(data->fan_preload[nr],
 155                                DIV_FROM_REG(data->fan_div[nr]));
 156         return sprintf(buf, "%d\n", rpm);
 157 }
 158
 159 static ssize_t get_fan_div(struct device *dev, char *buf, int nr)
 160 {
 161         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 162         return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr]));
 163 }
 164
 165 static ssize_t get_pwm(struct device *dev, char *buf, int nr)
 166 {
 167         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 168         return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
 169 }
 170
 171 static ssize_t get_pwm_en(struct device *dev, char *buf, int nr)
 172 {
 173         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 174         return sprintf(buf, "%d\n", PWM_EN_FROM_REG(data->pwm[nr]));
 175 }
 176
 177 static ssize_t get_alarms(struct device *dev, struct device_attribute *attr, char *buf)
 178 {
 179         struct smsc47m1_data *data = smsc47m1_update_device(dev, 0);
 180         return sprintf(buf, "%d\n", data->alarms);
 181 }
 182
 183 static ssize_t set_fan_min(struct device *dev, const char *buf,
 184                 size_t count, int nr)
 185 {
 186         struct i2c_client *client = to_i2c_client(dev);
 187         struct smsc47m1_data *data = i2c_get_clientdata(client);
 188         long rpmdiv, val = simple_strtol(buf, NULL, 10);
 189
 190         down(&data->update_lock);
 191         rpmdiv = val * DIV_FROM_REG(data->fan_div[nr]);
 192
 193         if (983040 > 192 * rpmdiv || 2 * rpmdiv > 983040) {
 194                 up(&data->update_lock);
 195                 return -EINVAL;
 196         }
 197
 198         data->fan_preload[nr] = 192 - ((983040 + rpmdiv / 2) / rpmdiv);
 199         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 200                              data->fan_preload[nr]);
 201         up(&data->update_lock);
 202
 203         return count;
 204 }
 205
 206 /* Note: we save and restore the fan minimum here, because its value is
 207    determined in part by the fan clock divider.  This follows the principle
 208    of least suprise; the user doesn't expect the fan minimum to change just
 209    because the divider changed. */
 210 static ssize_t set_fan_div(struct device *dev, const char *buf,
 211                 size_t count, int nr)
 212 {
 213         struct i2c_client *client = to_i2c_client(dev);
 214         struct smsc47m1_data *data = i2c_get_clientdata(client);
 215
 216         long new_div = simple_strtol(buf, NULL, 10), tmp;
 217         u8 old_div = DIV_FROM_REG(data->fan_div[nr]);
 218
 219         if (new_div == old_div) /* No change */
 220                 return count;
 221
 222         down(&data->update_lock);
 223         switch (new_div) {
 224         case 1: data->fan_div[nr] = 0; break;
 225         case 2: data->fan_div[nr] = 1; break;
 226         case 4: data->fan_div[nr] = 2; break;
 227         case 8: data->fan_div[nr] = 3; break;
 228         default:
 229                 up(&data->update_lock);
 230                 return -EINVAL;
 231         }
 232
 233         tmp = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV) & 0x0F;
 234         tmp |= (data->fan_div[0] << 4) | (data->fan_div[1] << 6);
 235         smsc47m1_write_value(client, SMSC47M1_REG_FANDIV, tmp);
 236
 237         /* Preserve fan min */
 238         tmp = 192 - (old_div * (192 - data->fan_preload[nr])
 239                      + new_div / 2) / new_div;
 240         data->fan_preload[nr] = SENSORS_LIMIT(tmp, 0, 191);
 241         smsc47m1_write_value(client, SMSC47M1_REG_FAN_PRELOAD(nr),
 242                              data->fan_preload[nr]);
 243         up(&data->update_lock);
 244
 245         return count;
 246 }
 247
 248 static ssize_t set_pwm(struct device *dev, const char *buf,
 249                 size_t count, int nr)
 250 {
 251         struct i2c_client *client = to_i2c_client(dev);
 252         struct smsc47m1_data *data = i2c_get_clientdata(client);
 253
 254         long val = simple_strtol(buf, NULL, 10);
 255
 256         if (val < 0 || val > 255)
 257                 return -EINVAL;
 258
 259         down(&data->update_lock);
 260         data->pwm[nr] &= 0x81; /* Preserve additional bits */
 261         data->pwm[nr] |= PWM_TO_REG(val);
 262         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 263                              data->pwm[nr]);
 264         up(&data->update_lock);
 265
 266         return count;
 267 }
 268
 269 static ssize_t set_pwm_en(struct device *dev, const char *buf,
 270                 size_t count, int nr)
 271 {
 272         struct i2c_client *client = to_i2c_client(dev);
 273         struct smsc47m1_data *data = i2c_get_clientdata(client);
 274
 275         long val = simple_strtol(buf, NULL, 10);
 276
 277         if (val != 0 && val != 1)
 278                 return -EINVAL;
 279
 280         down(&data->update_lock);
 281         data->pwm[nr] &= 0xFE; /* preserve the other bits */
 282         data->pwm[nr] |= !val;
 283         smsc47m1_write_value(client, SMSC47M1_REG_PWM(nr),
 284                              data->pwm[nr]);
 285         up(&data->update_lock);
 286
 287         return count;
 288 }
 289
 290 #define fan_present(offset)                                             \
 291 static ssize_t get_fan##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 292 {                                                                       \
 293         return get_fan(dev, buf, offset - 1);                           \
 294 }                                                                       \
 295 static ssize_t get_fan##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)     \
 296 {                                                                       \
 297         return get_fan_min(dev, buf, offset - 1);                       \
 298 }                                                                       \
 299 static ssize_t set_fan##offset##_min (struct device *dev, struct device_attribute *attr,                \
 300                 const char *buf, size_t count)                          \
 301 {                                                                       \
 302         return set_fan_min(dev, buf, count, offset - 1);                \
 303 }                                                                       \
 304 static ssize_t get_fan##offset##_div (struct device *dev, struct device_attribute *attr, char *buf)     \
 305 {                                                                       \
 306         return get_fan_div(dev, buf, offset - 1);                       \
 307 }                                                                       \
 308 static ssize_t set_fan##offset##_div (struct device *dev, struct device_attribute *attr,                \
 309                 const char *buf, size_t count)                          \
 310 {                                                                       \
 311         return set_fan_div(dev, buf, count, offset - 1);                \
 312 }                                                                       \
 313 static ssize_t get_pwm##offset (struct device *dev, struct device_attribute *attr, char *buf)           \
 314 {                                                                       \
 315         return get_pwm(dev, buf, offset - 1);                           \
 316 }                                                                       \
 317 static ssize_t set_pwm##offset (struct device *dev, struct device_attribute *attr,                      \
 318                 const char *buf, size_t count)                          \
 319 {                                                                       \
 320         return set_pwm(dev, buf, count, offset - 1);                    \
 321 }                                                                       \
 322 static ssize_t get_pwm##offset##_en (struct device *dev, struct device_attribute *attr, char *buf)      \
 323 {                                                                       \
 324         return get_pwm_en(dev, buf, offset - 1);                        \
 325 }                                                                       \
 326 static ssize_t set_pwm##offset##_en (struct device *dev, struct device_attribute *attr,         \
 327                 const char *buf, size_t count)                          \
 328 {                                                                       \
 329         return set_pwm_en(dev, buf, count, offset - 1);                 \
 330 }                                                                       \
 331 static DEVICE_ATTR(fan##offset##_input, S_IRUGO, get_fan##offset,       \
 332                 NULL);                                                  \
 333 static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR,                \
 334                 get_fan##offset##_min, set_fan##offset##_min);          \
 335 static DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR,                \
 336                 get_fan##offset##_div, set_fan##offset##_div);          \
 337 static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR,                      \
 338                 get_pwm##offset, set_pwm##offset);                      \
 339 static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR,             \
 340                 get_pwm##offset##_en, set_pwm##offset##_en);
 341
 342 fan_present(1);
 343 fan_present(2);
 344
 345 static DEVICE_ATTR(alarms, S_IRUGO, get_alarms, NULL);
 346
 347 static int __init smsc47m1_find(unsigned short *addr)
 348 {
 349         u8 val;
 350
 351         superio_enter();
 352         val = superio_inb(SUPERIO_REG_DEVID);
 353
 354         /*
 355          * SMSC LPC47M10x/LPC47M13x (device id 0x59), LPC47M14x (device id
 356          * 0x5F) and LPC47B27x (device id 0x51) have fan control.
 357          * The LPC47M15x and LPC47M192 chips "with hardware monitoring block"
 358          * can do much more besides (device id 0x60).
 359          */
 360         if (val == 0x51)
 361                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47B27x\n");
 362         else if (val == 0x59)
 363                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M10x/LPC47M13x\n");
 364         else if (val == 0x5F)
 365                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M14x\n");
 366         else if (val == 0x60)
 367                 printk(KERN_INFO "smsc47m1: Found SMSC LPC47M15x/LPC47M192\n");
 368         else {
 369                 superio_exit();
 370                 return -ENODEV;
 371         }
 372
 373         superio_select();
 374         *addr = (superio_inb(SUPERIO_REG_BASE) << 8)
 375               |  superio_inb(SUPERIO_REG_BASE + 1);
 376         val = superio_inb(SUPERIO_REG_ACT);
 377         if (*addr == 0 || (val & 0x01) == 0) {
 378                 printk(KERN_INFO "smsc47m1: Device is disabled, will not use\n");
 379                 superio_exit();
 380                 return -ENODEV;
 381         }
 382
 383         superio_exit();
 384         return 0;
 385 }
 386
 387 static int smsc47m1_detect(struct i2c_adapter *adapter)
 388 {
 389         struct i2c_client *new_client;
 390         struct smsc47m1_data *data;
 391         int err = 0;
 392         int fan1, fan2, pwm1, pwm2;
 393
 394         if (!request_region(address, SMSC_EXTENT, smsc47m1_driver.name)) {
 395                 dev_err(&adapter->dev, "Region 0x%x already in use!\n", address);
 396                 return -EBUSY;
 397         }
 398
 399         if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) {
 400                 err = -ENOMEM;
 401                 goto error_release;
 402         }
 403
 404         new_client = &data->client;
 405         i2c_set_clientdata(new_client, data);
 406         new_client->addr = address;
 407         init_MUTEX(&data->lock);
 408         new_client->adapter = adapter;
 409         new_client->driver = &smsc47m1_driver;
 410         new_client->flags = 0;
 411
 412         strlcpy(new_client->name, "smsc47m1", I2C_NAME_SIZE);
 413         init_MUTEX(&data->update_lock);
 414
 415         /* If no function is properly configured, there's no point in
 416            actually registering the chip. */
 417         fan1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(0)) & 0x05)
 418                == 0x05;
 419         fan2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_TPIN(1)) & 0x05)
 420                == 0x05;
 421         pwm1 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(0)) & 0x05)
 422                == 0x04;
 423         pwm2 = (smsc47m1_read_value(new_client, SMSC47M1_REG_PPIN(1)) & 0x05)
 424                == 0x04;
 425         if (!(fan1 || fan2 || pwm1 || pwm2)) {
 426                 dev_warn(&new_client->dev, "Device is not configured, will not use\n");
 427                 err = -ENODEV;
 428                 goto error_free;
 429         }
 430
 431         if ((err = i2c_attach_client(new_client)))
 432                 goto error_free;
 433
 434         /* Some values (fan min, clock dividers, pwm registers) may be
 435            needed before any update is triggered, so we better read them
 436            at least once here. We don't usually do it that way, but in
 437            this particular case, manually reading 5 registers out of 8
 438            doesn't make much sense and we're better using the existing
 439            function. */
 440         smsc47m1_update_device(&new_client->dev, 1);
 441
 442         /* Register sysfs hooks */
 443         data->class_dev = hwmon_device_register(&new_client->dev);
 444         if (IS_ERR(data->class_dev)) {
 445                 err = PTR_ERR(data->class_dev);
 446                 goto error_detach;
 447         }
 448
 449         if (fan1) {
 450                 device_create_file(&new_client->dev, &dev_attr_fan1_input);
 451                 device_create_file(&new_client->dev, &dev_attr_fan1_min);
 452                 device_create_file(&new_client->dev, &dev_attr_fan1_div);
 453         } else
 454                 dev_dbg(&new_client->dev, "Fan 1 not enabled by hardware, "
 455                         "skipping\n");
 456
 457         if (fan2) {
 458                 device_create_file(&new_client->dev, &dev_attr_fan2_input);
 459                 device_create_file(&new_client->dev, &dev_attr_fan2_min);
 460                 device_create_file(&new_client->dev, &dev_attr_fan2_div);
 461         } else
 462                 dev_dbg(&new_client->dev, "Fan 2 not enabled by hardware, "
 463                         "skipping\n");
 464
 465         if (pwm1) {
 466                 device_create_file(&new_client->dev, &dev_attr_pwm1);
 467                 device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
 468         } else
 469                 dev_dbg(&new_client->dev, "PWM 1 not enabled by hardware, "
 470                         "skipping\n");
 471         if (pwm2) {
 472                 device_create_file(&new_client->dev, &dev_attr_pwm2);
 473                 device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
 474         } else
 475                 dev_dbg(&new_client->dev, "PWM 2 not enabled by hardware, "
 476                         "skipping\n");
 477
 478         device_create_file(&new_client->dev, &dev_attr_alarms);
 479
 480         return 0;
 481
 482 error_detach:
 483         i2c_detach_client(new_client);
 484 error_free:
 485         kfree(data);
 486 error_release:
 487         release_region(address, SMSC_EXTENT);
 488         return err;
 489 }
 490
 491 static int smsc47m1_detach_client(struct i2c_client *client)
 492 {
 493         struct smsc47m1_data *data = i2c_get_clientdata(client);
 494         int err;
 495
 496         hwmon_device_unregister(data->class_dev);
 497
 498         if ((err = i2c_detach_client(client)))
 499                 return err;
 500
 501         release_region(client->addr, SMSC_EXTENT);
 502         kfree(data);
 503
 504         return 0;
 505 }
 506
 507 static int smsc47m1_read_value(struct i2c_client *client, u8 reg)
 508 {
 509         int res;
 510
 511         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 512         res = inb_p(client->addr + reg);
 513         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 514         return res;
 515 }
 516
 517 static void smsc47m1_write_value(struct i2c_client *client, u8 reg, u8 value)
 518 {
 519         down(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 520         outb_p(value, client->addr + reg);
 521         up(&((struct smsc47m1_data *) i2c_get_clientdata(client))->lock);
 522 }
 523
 524 static struct smsc47m1_data *smsc47m1_update_device(struct device *dev,
 525                 int init)
 526 {
 527         struct i2c_client *client = to_i2c_client(dev);
 528         struct smsc47m1_data *data = i2c_get_clientdata(client);
 529
 530         down(&data->update_lock);
 531
 532         if (time_after(jiffies, data->last_updated + HZ + HZ / 2) || init) {
 533                 int i;
 534
 535                 for (i = 0; i < 2; i++) {
 536                         data->fan[i] = smsc47m1_read_value(client,
 537                                        SMSC47M1_REG_FAN(i));
 538                         data->fan_preload[i] = smsc47m1_read_value(client,
 539                                                SMSC47M1_REG_FAN_PRELOAD(i));
 540                         data->pwm[i] = smsc47m1_read_value(client,
 541                                        SMSC47M1_REG_PWM(i));
 542                 }
 543
 544                 i = smsc47m1_read_value(client, SMSC47M1_REG_FANDIV);
 545                 data->fan_div[0] = (i >> 4) & 0x03;
 546                 data->fan_div[1] = i >> 6;
 547
 548                 data->alarms = smsc47m1_read_value(client,
 549                                SMSC47M1_REG_ALARM) >> 6;
 550                 /* Clear alarms if needed */
 551                 if (data->alarms)
 552                         smsc47m1_write_value(client, SMSC47M1_REG_ALARM, 0xC0);
 553
 554                 data->last_updated = jiffies;
 555         }
 556
 557         up(&data->update_lock);
 558         return data;
 559 }
 560
 561 static int __init sm_smsc47m1_init(void)
 562 {
 563         if (smsc47m1_find(&address)) {
 564                 return -ENODEV;
 565         }
 566
 567         return i2c_isa_add_driver(&smsc47m1_driver);
 568 }
 569
 570 static void __exit sm_smsc47m1_exit(void)
 571 {
 572         i2c_isa_del_driver(&smsc47m1_driver);
 573 }
 574
 575 MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>");
 576 MODULE_DESCRIPTION("SMSC LPC47M1xx fan sensors driver");
 577 MODULE_LICENSE("GPL");
 578
 579 module_init(sm_smsc47m1_init);
 580 module_exit(sm_smsc47m1_exit);