powerpc: Add dma nodes to 83xx, 85xx and 86xx boards
[linux-2.6] / arch / powerpc / boot / dts / mpc8379_rdb.dts
1 /*
2  * MPC8379E RDB Device Tree Source
3  *
4  * Copyright 2007, 2008 Freescale Semiconductor Inc.
5  *
6  * This program is free software; you can redistribute  it and/or modify it
7  * under  the terms of  the GNU General  Public License as published by the
8  * Free Software Foundation;  either version 2 of the  License, or (at your
9  * option) any later version.
10  */
11
12 /dts-v1/;
13
14 / {
15         compatible = "fsl,mpc8379rdb";
16         #address-cells = <1>;
17         #size-cells = <1>;
18
19         aliases {
20                 ethernet0 = &enet0;
21                 ethernet1 = &enet1;
22                 serial0 = &serial0;
23                 serial1 = &serial1;
24                 pci0 = &pci0;
25         };
26
27         cpus {
28                 #address-cells = <1>;
29                 #size-cells = <0>;
30
31                 PowerPC,8379@0 {
32                         device_type = "cpu";
33                         reg = <0x0>;
34                         d-cache-line-size = <32>;
35                         i-cache-line-size = <32>;
36                         d-cache-size = <32768>;
37                         i-cache-size = <32768>;
38                         timebase-frequency = <0>;
39                         bus-frequency = <0>;
40                         clock-frequency = <0>;
41                 };
42         };
43
44         memory {
45                 device_type = "memory";
46                 reg = <0x00000000 0x10000000>;  // 256MB at 0
47         };
48
49         localbus@e0005000 {
50                 #address-cells = <2>;
51                 #size-cells = <1>;
52                 compatible = "fsl,mpc8379-elbc", "fsl,elbc", "simple-bus";
53                 reg = <0xe0005000 0x1000>;
54                 interrupts = <77 0x8>;
55                 interrupt-parent = <&ipic>;
56
57                 // CS0 and CS1 are swapped when
58                 // booting from nand, but the
59                 // addresses are the same.
60                 ranges = <0x0 0x0 0xfe000000 0x00800000
61                           0x1 0x0 0xe0600000 0x00008000
62                           0x2 0x0 0xf0000000 0x00020000
63                           0x3 0x0 0xfa000000 0x00008000>;
64
65                 flash@0,0 {
66                         #address-cells = <1>;
67                         #size-cells = <1>;
68                         compatible = "cfi-flash";
69                         reg = <0x0 0x0 0x800000>;
70                         bank-width = <2>;
71                         device-width = <1>;
72                 };
73
74                 nand@1,0 {
75                         #address-cells = <1>;
76                         #size-cells = <1>;
77                         compatible = "fsl,mpc8379-fcm-nand",
78                                      "fsl,elbc-fcm-nand";
79                         reg = <0x1 0x0 0x8000>;
80
81                         u-boot@0 {
82                                 reg = <0x0 0x100000>;
83                                 read-only;
84                         };
85
86                         kernel@100000 {
87                                 reg = <0x100000 0x300000>;
88                         };
89                         fs@400000 {
90                                 reg = <0x400000 0x1c00000>;
91                         };
92                 };
93         };
94
95         immr@e0000000 {
96                 #address-cells = <1>;
97                 #size-cells = <1>;
98                 device_type = "soc";
99                 compatible = "simple-bus";
100                 ranges = <0x0 0xe0000000 0x00100000>;
101                 reg = <0xe0000000 0x00000200>;
102                 bus-frequency = <0>;
103
104                 wdt@200 {
105                         device_type = "watchdog";
106                         compatible = "mpc83xx_wdt";
107                         reg = <0x200 0x100>;
108                 };
109
110                 i2c@3000 {
111                         #address-cells = <1>;
112                         #size-cells = <0>;
113                         cell-index = <0>;
114                         compatible = "fsl-i2c";
115                         reg = <0x3000 0x100>;
116                         interrupts = <14 0x8>;
117                         interrupt-parent = <&ipic>;
118                         dfsrr;
119                         rtc@68 {
120                                 device_type = "rtc";
121                                 compatible = "dallas,ds1339";
122                                 reg = <0x68>;
123                         };
124                 };
125
126                 i2c@3100 {
127                         #address-cells = <1>;
128                         #size-cells = <0>;
129                         cell-index = <1>;
130                         compatible = "fsl-i2c";
131                         reg = <0x3100 0x100>;
132                         interrupts = <15 0x8>;
133                         interrupt-parent = <&ipic>;
134                         dfsrr;
135                 };
136
137                 spi@7000 {
138                         cell-index = <0>;
139                         compatible = "fsl,spi";
140                         reg = <0x7000 0x1000>;
141                         interrupts = <16 0x8>;
142                         interrupt-parent = <&ipic>;
143                         mode = "cpu";
144                 };
145
146                 dma@82a8 {
147                         #address-cells = <1>;
148                         #size-cells = <1>;
149                         compatible = "fsl,mpc8379-dma", "fsl,elo-dma";
150                         reg = <0x82a8 4>;
151                         ranges = <0 0x8100 0x1a8>;
152                         interrupt-parent = <&ipic>;
153                         interrupts = <71 8>;
154                         cell-index = <0>;
155                         dma-channel@0 {
156                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
157                                 reg = <0 0x80>;
158                                 interrupt-parent = <&ipic>;
159                                 interrupts = <71 8>;
160                         };
161                         dma-channel@80 {
162                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
163                                 reg = <0x80 0x80>;
164                                 interrupt-parent = <&ipic>;
165                                 interrupts = <71 8>;
166                         };
167                         dma-channel@100 {
168                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
169                                 reg = <0x100 0x80>;
170                                 interrupt-parent = <&ipic>;
171                                 interrupts = <71 8>;
172                         };
173                         dma-channel@180 {
174                                 compatible = "fsl,mpc8379-dma-channel", "fsl,elo-dma-channel";
175                                 reg = <0x180 0x28>;
176                                 interrupt-parent = <&ipic>;
177                                 interrupts = <71 8>;
178                         };
179                 };
180
181                 usb@23000 {
182                         compatible = "fsl-usb2-dr";
183                         reg = <0x23000 0x1000>;
184                         #address-cells = <1>;
185                         #size-cells = <0>;
186                         interrupt-parent = <&ipic>;
187                         interrupts = <38 0x8>;
188                         phy_type = "ulpi";
189                 };
190
191                 mdio@24520 {
192                         #address-cells = <1>;
193                         #size-cells = <0>;
194                         compatible = "fsl,gianfar-mdio";
195                         reg = <0x24520 0x20>;
196                         phy2: ethernet-phy@2 {
197                                 interrupt-parent = <&ipic>;
198                                 interrupts = <17 0x8>;
199                                 reg = <0x2>;
200                                 device_type = "ethernet-phy";
201                         };
202                         phy3: ethernet-phy@3 {
203                                 interrupt-parent = <&ipic>;
204                                 interrupts = <18 0x8>;
205                                 reg = <0x3>;
206                                 device_type = "ethernet-phy";
207                         };
208                 };
209
210                 enet0: ethernet@24000 {
211                         cell-index = <0>;
212                         device_type = "network";
213                         model = "eTSEC";
214                         compatible = "gianfar";
215                         reg = <0x24000 0x1000>;
216                         local-mac-address = [ 00 00 00 00 00 00 ];
217                         interrupts = <32 0x8 33 0x8 34 0x8>;
218                         phy-connection-type = "mii";
219                         interrupt-parent = <&ipic>;
220                         phy-handle = <&phy2>;
221                 };
222
223                 enet1: ethernet@25000 {
224                         cell-index = <1>;
225                         device_type = "network";
226                         model = "eTSEC";
227                         compatible = "gianfar";
228                         reg = <0x25000 0x1000>;
229                         local-mac-address = [ 00 00 00 00 00 00 ];
230                         interrupts = <35 0x8 36 0x8 37 0x8>;
231                         phy-connection-type = "mii";
232                         interrupt-parent = <&ipic>;
233                         phy-handle = <&phy3>;
234                 };
235
236                 serial0: serial@4500 {
237                         cell-index = <0>;
238                         device_type = "serial";
239                         compatible = "ns16550";
240                         reg = <0x4500 0x100>;
241                         clock-frequency = <0>;
242                         interrupts = <9 0x8>;
243                         interrupt-parent = <&ipic>;
244                 };
245
246                 serial1: serial@4600 {
247                         cell-index = <1>;
248                         device_type = "serial";
249                         compatible = "ns16550";
250                         reg = <0x4600 0x100>;
251                         clock-frequency = <0>;
252                         interrupts = <10 0x8>;
253                         interrupt-parent = <&ipic>;
254                 };
255
256                 crypto@30000 {
257                         model = "SEC3";
258                         device_type = "crypto";
259                         compatible = "talitos";
260                         reg = <0x30000 0x10000>;
261                         interrupts = <11 0x8>;
262                         interrupt-parent = <&ipic>;
263                         /* Rev. 3.0 geometry */
264                         num-channels = <4>;
265                         channel-fifo-len = <24>;
266                         exec-units-mask = <0x000001fe>;
267                         descriptor-types-mask = <0x03ab0ebf>;
268                 };
269
270                 sata@18000 {
271                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
272                         reg = <0x18000 0x1000>;
273                         interrupts = <44 0x8>;
274                         interrupt-parent = <&ipic>;
275                 };
276
277                 sata@19000 {
278                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
279                         reg = <0x19000 0x1000>;
280                         interrupts = <45 0x8>;
281                         interrupt-parent = <&ipic>;
282                 };
283
284                 sata@1a000 {
285                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
286                         reg = <0x1a000 0x1000>;
287                         interrupts = <46 0x8>;
288                         interrupt-parent = <&ipic>;
289                 };
290
291                 sata@1b000 {
292                         compatible = "fsl,mpc8379-sata", "fsl,pq-sata";
293                         reg = <0x1b000 0x1000>;
294                         interrupts = <47 0x8>;
295                         interrupt-parent = <&ipic>;
296                 };
297
298                 /* IPIC
299                  * interrupts cell = <intr #, sense>
300                  * sense values match linux IORESOURCE_IRQ_* defines:
301                  * sense == 8: Level, low assertion
302                  * sense == 2: Edge, high-to-low change
303                  */
304                 ipic: interrupt-controller@700 {
305                         compatible = "fsl,ipic";
306                         interrupt-controller;
307                         #address-cells = <0>;
308                         #interrupt-cells = <2>;
309                         reg = <0x700 0x100>;
310                 };
311         };
312
313         pci0: pci@e0008500 {
314                 interrupt-map-mask = <0xf800 0 0 7>;
315                 interrupt-map = <
316                                 /* IRQ5 = 21 = 0x15, IRQ6 = 0x16, IRQ7 = 23 = 0x17 */
317
318                                 /* IDSEL AD14 IRQ6 inta */
319                                  0x7000 0x0 0x0 0x1 &ipic 22 0x8
320
321                                 /* IDSEL AD15 IRQ5 inta, IRQ6 intb, IRQ7 intd */
322                                  0x7800 0x0 0x0 0x1 &ipic 21 0x8
323                                  0x7800 0x0 0x0 0x2 &ipic 22 0x8
324                                  0x7800 0x0 0x0 0x4 &ipic 23 0x8
325
326                                 /* IDSEL AD28 IRQ7 inta, IRQ5 intb IRQ6 intc*/
327                                  0xE000 0x0 0x0 0x1 &ipic 23 0x8
328                                  0xE000 0x0 0x0 0x2 &ipic 21 0x8
329                                  0xE000 0x0 0x0 0x3 &ipic 22 0x8>;
330                 interrupt-parent = <&ipic>;
331                 interrupts = <66 0x8>;
332                 bus-range = <0x0 0x0>;
333                 ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
334                           0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
335                           0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
336                 clock-frequency = <66666666>;
337                 #interrupt-cells = <1>;
338                 #size-cells = <2>;
339                 #address-cells = <3>;
340                 reg = <0xe0008500 0x100>;
341                 compatible = "fsl,mpc8349-pci";
342                 device_type = "pci";
343         };
344 };