git.oblomov.eu Git - linux-2.6/blob - drivers/net/chelsio/subr.c

   1 /*****************************************************************************
   2  *                                                                           *
   3  * File: subr.c                                                              *
   4  * $Revision: 1.27 $                                                         *
   5  * $Date: 2005/06/22 01:08:36 $                                              *
   6  * Description:                                                              *
   7  *  Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
   8  *  part of the Chelsio 10Gb Ethernet Driver.                                *
   9  *                                                                           *
  10  * This program is free software; you can redistribute it and/or modify      *
  11  * it under the terms of the GNU General Public License, version 2, as       *
  12  * published by the Free Software Foundation.                                *
  13  *                                                                           *
  14  * You should have received a copy of the GNU General Public License along   *
  15  * with this program; if not, write to the Free Software Foundation, Inc.,   *
  16  * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
  17  *                                                                           *
  18  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
  19  * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
  20  * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
  21  *                                                                           *
  22  * http://www.chelsio.com                                                    *
  23  *                                                                           *
  24  * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
  25  * All rights reserved.                                                      *
  26  *                                                                           *
  27  * Maintainers: maintainers@chelsio.com                                      *
  28  *                                                                           *
  29  * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
  30  *          Tina Yang               <tainay@chelsio.com>                     *
  31  *          Felix Marti             <felix@chelsio.com>                      *
  32  *          Scott Bardone           <sbardone@chelsio.com>                   *
  33  *          Kurt Ottaway            <kottaway@chelsio.com>                   *
  34  *          Frank DiMambro          <frank@chelsio.com>                      *
  35  *                                                                           *
  36  * History:                                                                  *
  37  *                                                                           *
  38  ****************************************************************************/
  39
  40 #include "common.h"
  41 #include "elmer0.h"
  42 #include "regs.h"
  43 #include "gmac.h"
  44 #include "cphy.h"
  45 #include "sge.h"
  46 #include "espi.h"
  47
  48 /**
  49  *      t1_wait_op_done - wait until an operation is completed
  50  *      @adapter: the adapter performing the operation
  51  *      @reg: the register to check for completion
  52  *      @mask: a single-bit field within @reg that indicates completion
  53  *      @polarity: the value of the field when the operation is completed
  54  *      @attempts: number of check iterations
  55  *      @delay: delay in usecs between iterations
  56  *
  57  *      Wait until an operation is completed by checking a bit in a register
  58  *      up to @attempts times.  Returns %0 if the operation completes and %1
  59  *      otherwise.
  60  */
  61 static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
  62                     int attempts, int delay)
  63 {
  64         while (1) {
  65                 u32 val = readl(adapter->regs + reg) & mask;
  66
  67                 if (!!val == polarity)
  68                         return 0;
  69                 if (--attempts == 0)
  70                         return 1;
  71                 if (delay)
  72                         udelay(delay);
  73         }
  74 }
  75
  76 #define TPI_ATTEMPTS 50
  77
  78 /*
  79  * Write a register over the TPI interface (unlocked and locked versions).
  80  */
  81 static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
  82 {
  83         int tpi_busy;
  84
  85         writel(addr, adapter->regs + A_TPI_ADDR);
  86         writel(value, adapter->regs + A_TPI_WR_DATA);
  87         writel(F_TPIWR, adapter->regs + A_TPI_CSR);
  88
  89         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
  90                                    TPI_ATTEMPTS, 3);
  91         if (tpi_busy)
  92                 CH_ALERT("%s: TPI write to 0x%x failed\n",
  93                          adapter->name, addr);
  94         return tpi_busy;
  95 }
  96
  97 int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
  98 {
  99         int ret;
 100
 101         spin_lock(&(adapter)->tpi_lock);
 102         ret = __t1_tpi_write(adapter, addr, value);
 103         spin_unlock(&(adapter)->tpi_lock);
 104         return ret;
 105 }
 106
 107 /*
 108  * Read a register over the TPI interface (unlocked and locked versions).
 109  */
 110 static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 111 {
 112         int tpi_busy;
 113
 114         writel(addr, adapter->regs + A_TPI_ADDR);
 115         writel(0, adapter->regs + A_TPI_CSR);
 116
 117         tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
 118                                    TPI_ATTEMPTS, 3);
 119         if (tpi_busy)
 120                 CH_ALERT("%s: TPI read from 0x%x failed\n",
 121                          adapter->name, addr);
 122         else
 123                 *valp = readl(adapter->regs + A_TPI_RD_DATA);
 124         return tpi_busy;
 125 }
 126
 127 int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
 128 {
 129         int ret;
 130
 131         spin_lock(&(adapter)->tpi_lock);
 132         ret = __t1_tpi_read(adapter, addr, valp);
 133         spin_unlock(&(adapter)->tpi_lock);
 134         return ret;
 135 }
 136
 137 /*
 138  * Called when a port's link settings change to propagate the new values to the
 139  * associated PHY and MAC.  After performing the common tasks it invokes an
 140  * OS-specific handler.
 141  */
 142 /* static */ void link_changed(adapter_t *adapter, int port_id)
 143 {
 144         int link_ok, speed, duplex, fc;
 145         struct cphy *phy = adapter->port[port_id].phy;
 146         struct link_config *lc = &adapter->port[port_id].link_config;
 147
 148         phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
 149
 150         lc->speed = speed < 0 ? SPEED_INVALID : speed;
 151         lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
 152         if (!(lc->requested_fc & PAUSE_AUTONEG))
 153                 fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 154
 155         if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
 156                 /* Set MAC speed, duplex, and flow control to match PHY. */
 157                 struct cmac *mac = adapter->port[port_id].mac;
 158
 159                 mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
 160                 lc->fc = (unsigned char)fc;
 161         }
 162         t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
 163 }
 164
 165 static int t1_pci_intr_handler(adapter_t *adapter)
 166 {
 167         u32 pcix_cause;
 168
 169         pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
 170
 171         if (pcix_cause) {
 172                 pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
 173                                          pcix_cause);
 174                 t1_fatal_err(adapter);    /* PCI errors are fatal */
 175         }
 176         return 0;
 177 }
 178
 179
 180 /*
 181  * Wait until Elmer's MI1 interface is ready for new operations.
 182  */
 183 static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
 184 {
 185         int attempts = 100, busy;
 186
 187         do {
 188                 u32 val;
 189
 190                 __t1_tpi_read(adapter, mi1_reg, &val);
 191                 busy = val & F_MI1_OP_BUSY;
 192                 if (busy)
 193                         udelay(10);
 194         } while (busy && --attempts);
 195         if (busy)
 196                 CH_ALERT("%s: MDIO operation timed out\n",
 197                          adapter->name);
 198         return busy;
 199 }
 200
 201 /*
 202  * MI1 MDIO initialization.
 203  */
 204 static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
 205 {
 206         u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
 207         u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
 208                 V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
 209
 210         if (!(bi->caps & SUPPORTED_10000baseT_Full))
 211                 val |= V_MI1_SOF(1);
 212         t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
 213 }
 214
 215 static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
 216                              int reg_addr, unsigned int *valp)
 217 {
 218         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 219
 220         spin_lock(&(adapter)->tpi_lock);
 221
 222         /* Write the address we want. */
 223         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 224         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
 225         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
 226                        MI1_OP_INDIRECT_ADDRESS);
 227         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 228
 229         /* Write the operation we want. */
 230         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
 231         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 232
 233         /* Read the data. */
 234         __t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
 235         spin_unlock(&(adapter)->tpi_lock);
 236         return 0;
 237 }
 238
 239 static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
 240                               int reg_addr, unsigned int val)
 241 {
 242         u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
 243
 244         spin_lock(&(adapter)->tpi_lock);
 245
 246         /* Write the address we want. */
 247         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
 248         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
 249         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
 250                        MI1_OP_INDIRECT_ADDRESS);
 251         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 252
 253         /* Write the data. */
 254         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
 255         __t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
 256         mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
 257         spin_unlock(&(adapter)->tpi_lock);
 258         return 0;
 259 }
 260
 261 static struct mdio_ops mi1_mdio_ext_ops = {
 262         mi1_mdio_init,
 263         mi1_mdio_ext_read,
 264         mi1_mdio_ext_write
 265 };
 266
 267 enum {
 268         CH_BRD_N110_1F,
 269         CH_BRD_N210_1F,
 270 };
 271
 272 static struct board_info t1_board[] = {
 273
 274 { CHBT_BOARD_N110, 1/*ports#*/,
 275   SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
 276   CHBT_MAC_PM3393, CHBT_PHY_88X2010,
 277   125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
 278   1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
 279   0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
 280   &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
 281   "Chelsio N110 1x10GBaseX NIC" },
 282
 283 { CHBT_BOARD_N210, 1/*ports#*/,
 284   SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
 285   CHBT_MAC_PM3393, CHBT_PHY_88X2010,
 286   125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
 287   1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
 288   0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
 289   &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
 290   "Chelsio N210 1x10GBaseX NIC" },
 291
 292 };
 293
 294 struct pci_device_id t1_pci_tbl[] = {
 295         CH_DEVICE(7, 0, CH_BRD_N110_1F),
 296         CH_DEVICE(10, 1, CH_BRD_N210_1F),
 297         { 0, }
 298 };
 299
 300 MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
 301
 302 /*
 303  * Return the board_info structure with a given index.  Out-of-range indices
 304  * return NULL.
 305  */
 306 const struct board_info *t1_get_board_info(unsigned int board_id)
 307 {
 308         return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
 309 }
 310
 311 struct chelsio_vpd_t {
 312         u32 format_version;
 313         u8 serial_number[16];
 314         u8 mac_base_address[6];
 315         u8 pad[2];           /* make multiple-of-4 size requirement explicit */
 316 };
 317
 318 #define EEPROMSIZE        (8 * 1024)
 319 #define EEPROM_MAX_POLL   4
 320
 321 /*
 322  * Read SEEPROM. A zero is written to the flag register when the addres is
 323  * written to the Control register. The hardware device will set the flag to a
 324  * one when 4B have been transferred to the Data register.
 325  */
 326 int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
 327 {
 328         int i = EEPROM_MAX_POLL;
 329         u16 val;
 330
 331         if (addr >= EEPROMSIZE || (addr & 3))
 332                 return -EINVAL;
 333
 334         pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
 335         do {
 336                 udelay(50);
 337                 pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
 338         } while (!(val & F_VPD_OP_FLAG) && --i);
 339
 340         if (!(val & F_VPD_OP_FLAG)) {
 341                 CH_ERR("%s: reading EEPROM address 0x%x failed\n",
 342                        adapter->name, addr);
 343                 return -EIO;
 344         }
 345         pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
 346         *data = le32_to_cpu(*data);
 347         return 0;
 348 }
 349
 350 static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
 351 {
 352         int addr, ret = 0;
 353
 354         for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
 355                 ret = t1_seeprom_read(adapter, addr,
 356                                       (u32 *)((u8 *)vpd + addr));
 357
 358         return ret;
 359 }
 360
 361 /*
 362  * Read a port's MAC address from the VPD ROM.
 363  */
 364 static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
 365 {
 366         struct chelsio_vpd_t vpd;
 367
 368         if (t1_eeprom_vpd_get(adapter, &vpd))
 369                 return 1;
 370         memcpy(mac_addr, vpd.mac_base_address, 5);
 371         mac_addr[5] = vpd.mac_base_address[5] + index;
 372         return 0;
 373 }
 374
 375 /*
 376  * Set up the MAC/PHY according to the requested link settings.
 377  *
 378  * If the PHY can auto-negotiate first decide what to advertise, then
 379  * enable/disable auto-negotiation as desired and reset.
 380  *
 381  * If the PHY does not auto-negotiate we just reset it.
 382  *
 383  * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
 384  * otherwise do it later based on the outcome of auto-negotiation.
 385  */
 386 int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
 387 {
 388         unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
 389
 390         if (lc->supported & SUPPORTED_Autoneg) {
 391                 lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
 392                 if (fc) {
 393                         lc->advertising |= ADVERTISED_ASYM_PAUSE;
 394                         if (fc == (PAUSE_RX | PAUSE_TX))
 395                                 lc->advertising |= ADVERTISED_PAUSE;
 396                 }
 397                 phy->ops->advertise(phy, lc->advertising);
 398
 399                 if (lc->autoneg == AUTONEG_DISABLE) {
 400                         lc->speed = lc->requested_speed;
 401                         lc->duplex = lc->requested_duplex;
 402                         lc->fc = (unsigned char)fc;
 403                         mac->ops->set_speed_duplex_fc(mac, lc->speed,
 404                                                       lc->duplex, fc);
 405                         /* Also disables autoneg */
 406                         phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
 407                         phy->ops->reset(phy, 0);
 408                 } else
 409                         phy->ops->autoneg_enable(phy); /* also resets PHY */
 410         } else {
 411                 mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
 412                 lc->fc = (unsigned char)fc;
 413                 phy->ops->reset(phy, 0);
 414         }
 415         return 0;
 416 }
 417
 418 /*
 419  * External interrupt handler for boards using elmer0.
 420  */
 421 int elmer0_ext_intr_handler(adapter_t *adapter)
 422 {
 423         struct cphy *phy;
 424         int phy_cause;
 425         u32 cause;
 426
 427         t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
 428
 429         switch (board_info(adapter)->board) {
 430         case CHBT_BOARD_N210:
 431         case CHBT_BOARD_N110:
 432                 if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
 433                         phy = adapter->port[0].phy;
 434                         phy_cause = phy->ops->interrupt_handler(phy);
 435                         if (phy_cause & cphy_cause_link_change)
 436                                 link_changed(adapter, 0);
 437                 }
 438                 break;
 439         }
 440         t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
 441         return 0;
 442 }
 443
 444 /* Enables all interrupts. */
 445 void t1_interrupts_enable(adapter_t *adapter)
 446 {
 447         unsigned int i;
 448         u32 pl_intr;
 449
 450         adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
 451
 452         t1_sge_intr_enable(adapter->sge);
 453         if (adapter->espi) {
 454                 adapter->slow_intr_mask |= F_PL_INTR_ESPI;
 455                 t1_espi_intr_enable(adapter->espi);
 456         }
 457
 458         /* Enable MAC/PHY interrupts for each port. */
 459         for_each_port(adapter, i) {
 460                 adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
 461                 adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
 462         }
 463
 464         /* Enable PCIX & external chip interrupts on ASIC boards. */
 465         pl_intr = readl(adapter->regs + A_PL_ENABLE);
 466
 467         /* PCI-X interrupts */
 468         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
 469                                0xffffffff);
 470
 471         adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 472         pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
 473         writel(pl_intr, adapter->regs + A_PL_ENABLE);
 474 }
 475
 476 /* Disables all interrupts. */
 477 void t1_interrupts_disable(adapter_t* adapter)
 478 {
 479         unsigned int i;
 480
 481         t1_sge_intr_disable(adapter->sge);
 482         if (adapter->espi)
 483                 t1_espi_intr_disable(adapter->espi);
 484
 485         /* Disable MAC/PHY interrupts for each port. */
 486         for_each_port(adapter, i) {
 487                 adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
 488                 adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
 489         }
 490
 491         /* Disable PCIX & external chip interrupts. */
 492         writel(0, adapter->regs + A_PL_ENABLE);
 493
 494         /* PCI-X interrupts */
 495         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
 496
 497         adapter->slow_intr_mask = 0;
 498 }
 499
 500 /* Clears all interrupts */
 501 void t1_interrupts_clear(adapter_t* adapter)
 502 {
 503         unsigned int i;
 504         u32 pl_intr;
 505
 506
 507         t1_sge_intr_clear(adapter->sge);
 508         if (adapter->espi)
 509                 t1_espi_intr_clear(adapter->espi);
 510
 511         /* Clear MAC/PHY interrupts for each port. */
 512         for_each_port(adapter, i) {
 513                 adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
 514                 adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
 515         }
 516
 517         /* Enable interrupts for external devices. */
 518         pl_intr = readl(adapter->regs + A_PL_CAUSE);
 519
 520         writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
 521                adapter->regs + A_PL_CAUSE);
 522
 523         /* PCI-X interrupts */
 524         pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
 525 }
 526
 527 /*
 528  * Slow path interrupt handler for ASICs.
 529  */
 530 int t1_slow_intr_handler(adapter_t *adapter)
 531 {
 532         u32 cause = readl(adapter->regs + A_PL_CAUSE);
 533
 534         cause &= adapter->slow_intr_mask;
 535         if (!cause)
 536                 return 0;
 537         if (cause & F_PL_INTR_SGE_ERR)
 538                 t1_sge_intr_error_handler(adapter->sge);
 539         if (cause & F_PL_INTR_ESPI)
 540                 t1_espi_intr_handler(adapter->espi);
 541         if (cause & F_PL_INTR_PCIX)
 542                 t1_pci_intr_handler(adapter);
 543         if (cause & F_PL_INTR_EXT)
 544                 t1_elmer0_ext_intr(adapter);
 545
 546         /* Clear the interrupts just processed. */
 547         writel(cause, adapter->regs + A_PL_CAUSE);
 548         (void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
 549         return 1;
 550 }
 551
 552 /* Pause deadlock avoidance parameters */
 553 #define DROP_MSEC 16
 554 #define DROP_PKTS_CNT  1
 555
 556 static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
 557 {
 558         u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
 559
 560         if (enable)
 561                 val |= csum_bit;
 562         else
 563                 val &= ~csum_bit;
 564         writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
 565 }
 566
 567 void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
 568 {
 569         set_csum_offload(adapter, F_IP_CSUM, enable);
 570 }
 571
 572 void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
 573 {
 574         set_csum_offload(adapter, F_UDP_CSUM, enable);
 575 }
 576
 577 void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
 578 {
 579         set_csum_offload(adapter, F_TCP_CSUM, enable);
 580 }
 581
 582 static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
 583 {
 584         u32 val;
 585
 586         val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
 587               F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
 588         val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
 589                F_TP_IN_ESPI_CHECK_TCP_CSUM;
 590         writel(val, adapter->regs + A_TP_IN_CONFIG);
 591         writel(F_TP_OUT_CSPI_CPL |
 592                F_TP_OUT_ESPI_ETHERNET |
 593                F_TP_OUT_ESPI_GENERATE_IP_CSUM |
 594                F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
 595                adapter->regs + A_TP_OUT_CONFIG);
 596
 597         val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
 598         val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
 599         writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
 600
 601         /*
 602          * Enable pause frame deadlock prevention.
 603          */
 604         if (is_T2(adapter)) {
 605                 u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
 606
 607                 writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
 608                        V_DROP_TICKS_CNT(drop_ticks) |
 609                        V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
 610                        adapter->regs + A_TP_TX_DROP_CONFIG);
 611         }
 612
 613         writel(F_TP_RESET, adapter->regs + A_TP_RESET);
 614 }
 615
 616 int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
 617                                struct adapter_params *p)
 618 {
 619         p->chip_version = bi->chip_term;
 620         if (p->chip_version == CHBT_TERM_T1 ||
 621             p->chip_version == CHBT_TERM_T2) {
 622                 u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
 623
 624                 val = G_TP_PC_REV(val);
 625                 if (val == 2)
 626                         p->chip_revision = TERM_T1B;
 627                 else if (val == 3)
 628                         p->chip_revision = TERM_T2;
 629                 else
 630                         return -1;
 631         } else
 632                 return -1;
 633         return 0;
 634 }
 635
 636 /*
 637  * Enable board components other than the Chelsio chip, such as external MAC
 638  * and PHY.
 639  */
 640 static int board_init(adapter_t *adapter, const struct board_info *bi)
 641 {
 642         switch (bi->board) {
 643         case CHBT_BOARD_N110:
 644         case CHBT_BOARD_N210:
 645                 writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
 646                 t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
 647                 break;
 648         }
 649         return 0;
 650 }
 651
 652 /*
 653  * Initialize and configure the Terminator HW modules.  Note that external
 654  * MAC and PHYs are initialized separately.
 655  */
 656 int t1_init_hw_modules(adapter_t *adapter)
 657 {
 658         int err = -EIO;
 659         const struct board_info *bi = board_info(adapter);
 660
 661         if (!bi->clock_mc4) {
 662                 u32 val = readl(adapter->regs + A_MC4_CFG);
 663
 664                 writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
 665                 writel(F_M_BUS_ENABLE | F_TCAM_RESET,
 666                        adapter->regs + A_MC5_CONFIG);
 667         }
 668
 669         if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
 670                                           bi->espi_nports))
 671                 goto out_err;
 672
 673         t1_tp_reset(adapter, bi->clock_core);
 674
 675         err = t1_sge_configure(adapter->sge, &adapter->params.sge);
 676         if (err)
 677                 goto out_err;
 678
 679         err = 0;
 680  out_err:
 681         return err;
 682 }
 683
 684 /*
 685  * Determine a card's PCI mode.
 686  */
 687 static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
 688 {
 689         static const unsigned short speed_map[] = { 33, 66, 100, 133 };
 690         u32 pci_mode;
 691
 692         pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
 693         p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
 694         p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
 695         p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
 696 }
 697
 698 /*
 699  * Release the structures holding the SW per-Terminator-HW-module state.
 700  */
 701 void t1_free_sw_modules(adapter_t *adapter)
 702 {
 703         unsigned int i;
 704
 705         for_each_port(adapter, i) {
 706                 struct cmac *mac = adapter->port[i].mac;
 707                 struct cphy *phy = adapter->port[i].phy;
 708
 709                 if (mac)
 710                         mac->ops->destroy(mac);
 711                 if (phy)
 712                         phy->ops->destroy(phy);
 713         }
 714
 715         if (adapter->sge)
 716                 t1_sge_destroy(adapter->sge);
 717         if (adapter->espi)
 718                 t1_espi_destroy(adapter->espi);
 719 }
 720
 721 static void __devinit init_link_config(struct link_config *lc,
 722                                        const struct board_info *bi)
 723 {
 724         lc->supported = bi->caps;
 725         lc->requested_speed = lc->speed = SPEED_INVALID;
 726         lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
 727         lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
 728         if (lc->supported & SUPPORTED_Autoneg) {
 729                 lc->advertising = lc->supported;
 730                 lc->autoneg = AUTONEG_ENABLE;
 731                 lc->requested_fc |= PAUSE_AUTONEG;
 732         } else {
 733                 lc->advertising = 0;
 734                 lc->autoneg = AUTONEG_DISABLE;
 735         }
 736 }
 737
 738
 739 /*
 740  * Allocate and initialize the data structures that hold the SW state of
 741  * the Terminator HW modules.
 742  */
 743 int __devinit t1_init_sw_modules(adapter_t *adapter,
 744                                  const struct board_info *bi)
 745 {
 746         unsigned int i;
 747
 748         adapter->params.brd_info = bi;
 749         adapter->params.nports = bi->port_number;
 750         adapter->params.stats_update_period = bi->gmac->stats_update_period;
 751
 752         adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
 753         if (!adapter->sge) {
 754                 CH_ERR("%s: SGE initialization failed\n",
 755                        adapter->name);
 756                 goto error;
 757         }
 758
 759         if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
 760                 CH_ERR("%s: ESPI initialization failed\n",
 761                        adapter->name);
 762                 goto error;
 763         }
 764
 765         board_init(adapter, bi);
 766         bi->mdio_ops->init(adapter, bi);
 767         if (bi->gphy->reset)
 768                 bi->gphy->reset(adapter);
 769         if (bi->gmac->reset)
 770                 bi->gmac->reset(adapter);
 771
 772         for_each_port(adapter, i) {
 773                 u8 hw_addr[6];
 774                 struct cmac *mac;
 775                 int phy_addr = bi->mdio_phybaseaddr + i;
 776
 777                 adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
 778                                                         bi->mdio_ops);
 779                 if (!adapter->port[i].phy) {
 780                         CH_ERR("%s: PHY %d initialization failed\n",
 781                                adapter->name, i);
 782                         goto error;
 783                 }
 784
 785                 adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
 786                 if (!mac) {
 787                         CH_ERR("%s: MAC %d initialization failed\n",
 788                                adapter->name, i);
 789                         goto error;
 790                 }
 791
 792                 /*
 793                  * Get the port's MAC addresses either from the EEPROM if one
 794                  * exists or the one hardcoded in the MAC.
 795                  */
 796                 if (vpd_macaddress_get(adapter, i, hw_addr)) {
 797                         CH_ERR("%s: could not read MAC address from VPD ROM\n",
 798                                adapter->port[i].dev->name);
 799                         goto error;
 800                 }
 801                 memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
 802                 init_link_config(&adapter->port[i].link_config, bi);
 803         }
 804
 805         get_pci_mode(adapter, &adapter->params.pci);
 806         t1_interrupts_clear(adapter);
 807         return 0;
 808
 809  error:
 810         t1_free_sw_modules(adapter);
 811         return -1;
 812 }