git.oblomov.eu Git - linux-2.6/blob - drivers/acpi/executer/exresnte.c

   1
   2 /******************************************************************************
   3  *
   4  * Module Name: exresnte - AML Interpreter object resolution
   5  *
   6  *****************************************************************************/
   7
   8 /*
   9  * Copyright (C) 2000 - 2005, R. Byron Moore
  10  * All rights reserved.
  11  *
  12  * Redistribution and use in source and binary forms, with or without
  13  * modification, are permitted provided that the following conditions
  14  * are met:
  15  * 1. Redistributions of source code must retain the above copyright
  16  *    notice, this list of conditions, and the following disclaimer,
  17  *    without modification.
  18  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  19  *    substantially similar to the "NO WARRANTY" disclaimer below
  20  *    ("Disclaimer") and any redistribution must be conditioned upon
  21  *    including a substantially similar Disclaimer requirement for further
  22  *    binary redistribution.
  23  * 3. Neither the names of the above-listed copyright holders nor the names
  24  *    of any contributors may be used to endorse or promote products derived
  25  *    from this software without specific prior written permission.
  26  *
  27  * Alternatively, this software may be distributed under the terms of the
  28  * GNU General Public License ("GPL") version 2 as published by the Free
  29  * Software Foundation.
  30  *
  31  * NO WARRANTY
  32  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  33  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  34  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  35  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  36  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  37  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  38  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  39  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  40  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  41  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  42  * POSSIBILITY OF SUCH DAMAGES.
  43  */
  44
  45
  46 #include <acpi/acpi.h>
  47 #include <acpi/acdispat.h>
  48 #include <acpi/acinterp.h>
  49 #include <acpi/acnamesp.h>
  50 #include <acpi/acparser.h>
  51 #include <acpi/amlcode.h>
  52
  53
  54 #define _COMPONENT          ACPI_EXECUTER
  55          ACPI_MODULE_NAME    ("exresnte")
  56
  57
  58 /*******************************************************************************
  59  *
  60  * FUNCTION:    acpi_ex_resolve_node_to_value
  61  *
  62  * PARAMETERS:  object_ptr      - Pointer to a location that contains
  63  *                                a pointer to a NS node, and will receive a
  64  *                                pointer to the resolved object.
  65  *              walk_state      - Current state.  Valid only if executing AML
  66  *                                code.  NULL if simply resolving an object
  67  *
  68  * RETURN:      Status
  69  *
  70  * DESCRIPTION: Resolve a Namespace node to a valued object
  71  *
  72  * Note: for some of the data types, the pointer attached to the Node
  73  * can be either a pointer to an actual internal object or a pointer into the
  74  * AML stream itself.  These types are currently:
  75  *
  76  *      ACPI_TYPE_INTEGER
  77  *      ACPI_TYPE_STRING
  78  *      ACPI_TYPE_BUFFER
  79  *      ACPI_TYPE_MUTEX
  80  *      ACPI_TYPE_PACKAGE
  81  *
  82  ******************************************************************************/
  83
  84 acpi_status
  85 acpi_ex_resolve_node_to_value (
  86         struct acpi_namespace_node      **object_ptr,
  87         struct acpi_walk_state          *walk_state)
  88
  89 {
  90         acpi_status                     status = AE_OK;
  91         union acpi_operand_object       *source_desc;
  92         union acpi_operand_object       *obj_desc = NULL;
  93         struct acpi_namespace_node      *node;
  94         acpi_object_type                entry_type;
  95
  96
  97         ACPI_FUNCTION_TRACE ("ex_resolve_node_to_value");
  98
  99
 100         /*
 101          * The stack pointer points to a struct acpi_namespace_node (Node).  Get the
 102          * object that is attached to the Node.
 103          */
 104         node       = *object_ptr;
 105         source_desc = acpi_ns_get_attached_object (node);
 106         entry_type = acpi_ns_get_type ((acpi_handle) node);
 107
 108         ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "Entry=%p source_desc=%p [%s]\n",
 109                  node, source_desc, acpi_ut_get_type_name (entry_type)));
 110
 111         if ((entry_type == ACPI_TYPE_LOCAL_ALIAS) ||
 112                 (entry_type == ACPI_TYPE_LOCAL_METHOD_ALIAS)) {
 113                 /* There is always exactly one level of indirection */
 114
 115                 node       = ACPI_CAST_PTR (struct acpi_namespace_node, node->object);
 116                 source_desc = acpi_ns_get_attached_object (node);
 117                 entry_type = acpi_ns_get_type ((acpi_handle) node);
 118                 *object_ptr = node;
 119         }
 120
 121         /*
 122          * Several object types require no further processing:
 123          * 1) Devices rarely have an attached object, return the Node
 124          * 2) Method locals and arguments have a pseudo-Node
 125          */
 126         if (entry_type == ACPI_TYPE_DEVICE ||
 127                 (node->flags & (ANOBJ_METHOD_ARG | ANOBJ_METHOD_LOCAL))) {
 128                 return_ACPI_STATUS (AE_OK);
 129         }
 130
 131         if (!source_desc) {
 132                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "No object attached to node %p\n",
 133                         node));
 134                 return_ACPI_STATUS (AE_AML_NO_OPERAND);
 135         }
 136
 137         /*
 138          * Action is based on the type of the Node, which indicates the type
 139          * of the attached object or pointer
 140          */
 141         switch (entry_type) {
 142         case ACPI_TYPE_PACKAGE:
 143
 144                 if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_PACKAGE) {
 145                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Package, type %s\n",
 146                                 acpi_ut_get_object_type_name (source_desc)));
 147                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 148                 }
 149
 150                 status = acpi_ds_get_package_arguments (source_desc);
 151                 if (ACPI_SUCCESS (status)) {
 152                         /* Return an additional reference to the object */
 153
 154                         obj_desc = source_desc;
 155                         acpi_ut_add_reference (obj_desc);
 156                 }
 157                 break;
 158
 159
 160         case ACPI_TYPE_BUFFER:
 161
 162                 if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_BUFFER) {
 163                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Buffer, type %s\n",
 164                                 acpi_ut_get_object_type_name (source_desc)));
 165                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 166                 }
 167
 168                 status = acpi_ds_get_buffer_arguments (source_desc);
 169                 if (ACPI_SUCCESS (status)) {
 170                         /* Return an additional reference to the object */
 171
 172                         obj_desc = source_desc;
 173                         acpi_ut_add_reference (obj_desc);
 174                 }
 175                 break;
 176
 177
 178         case ACPI_TYPE_STRING:
 179
 180                 if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_STRING) {
 181                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a String, type %s\n",
 182                                 acpi_ut_get_object_type_name (source_desc)));
 183                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 184                 }
 185
 186                 /* Return an additional reference to the object */
 187
 188                 obj_desc = source_desc;
 189                 acpi_ut_add_reference (obj_desc);
 190                 break;
 191
 192
 193         case ACPI_TYPE_INTEGER:
 194
 195                 if (ACPI_GET_OBJECT_TYPE (source_desc) != ACPI_TYPE_INTEGER) {
 196                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR, "Object not a Integer, type %s\n",
 197                                 acpi_ut_get_object_type_name (source_desc)));
 198                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 199                 }
 200
 201                 /* Return an additional reference to the object */
 202
 203                 obj_desc = source_desc;
 204                 acpi_ut_add_reference (obj_desc);
 205                 break;
 206
 207
 208         case ACPI_TYPE_BUFFER_FIELD:
 209         case ACPI_TYPE_LOCAL_REGION_FIELD:
 210         case ACPI_TYPE_LOCAL_BANK_FIELD:
 211         case ACPI_TYPE_LOCAL_INDEX_FIELD:
 212
 213                 ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
 214                         "field_read Node=%p source_desc=%p Type=%X\n",
 215                         node, source_desc, entry_type));
 216
 217                 status = acpi_ex_read_data_from_field (walk_state, source_desc, &obj_desc);
 218                 break;
 219
 220         /* For these objects, just return the object attached to the Node */
 221
 222         case ACPI_TYPE_MUTEX:
 223         case ACPI_TYPE_METHOD:
 224         case ACPI_TYPE_POWER:
 225         case ACPI_TYPE_PROCESSOR:
 226         case ACPI_TYPE_THERMAL:
 227         case ACPI_TYPE_EVENT:
 228         case ACPI_TYPE_REGION:
 229
 230                 /* Return an additional reference to the object */
 231
 232                 obj_desc = source_desc;
 233                 acpi_ut_add_reference (obj_desc);
 234                 break;
 235
 236         /* TYPE_ANY is untyped, and thus there is no object associated with it */
 237
 238         case ACPI_TYPE_ANY:
 239
 240                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 241                         "Untyped entry %p, no attached object!\n",
 242                         node));
 243
 244                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);  /* Cannot be AE_TYPE */
 245
 246
 247         case ACPI_TYPE_LOCAL_REFERENCE:
 248
 249                 switch (source_desc->reference.opcode) {
 250                 case AML_LOAD_OP:
 251
 252                         /* This is a ddb_handle */
 253                         /* Return an additional reference to the object */
 254
 255                         obj_desc = source_desc;
 256                         acpi_ut_add_reference (obj_desc);
 257                         break;
 258
 259                 default:
 260                         /* No named references are allowed here */
 261
 262                         ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 263                                 "Unsupported Reference opcode %X (%s)\n",
 264                                 source_desc->reference.opcode,
 265                                 acpi_ps_get_opcode_name (source_desc->reference.opcode)));
 266
 267                         return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 268                 }
 269                 break;
 270
 271
 272         default:
 273
 274                 /* Default case is for unknown types */
 275
 276                 ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
 277                         "Node %p - Unknown object type %X\n",
 278                         node, entry_type));
 279
 280                 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
 281
 282         } /* switch (entry_type) */
 283
 284
 285         /* Return the object descriptor */
 286
 287         *object_ptr = (void *) obj_desc;
 288         return_ACPI_STATUS (status);
 289 }
 290
 291