net: convert print_mac to %pM

[linux-2.6] / drivers / net / bonding / bond_main.c

/*
 * originally based on the dummy device.
 *
 * Copyright 1999, Thomas Davis, tadavis@lbl.gov.
 * Licensed under the GPL. Based on dummy.c, and eql.c devices.
 *
 * bonding.c: an Ethernet Bonding driver
 *
 * This is useful to talk to a Cisco EtherChannel compatible equipment:
 *      Cisco 5500
 *      Sun Trunking (Solaris)
 *      Alteon AceDirector Trunks
 *      Linux Bonding
 *      and probably many L2 switches ...
 *
 * How it works:
 *    ifconfig bond0 ipaddress netmask up
 *      will setup a network device, with an ip address.  No mac address
 *      will be assigned at this time.  The hw mac address will come from
 *      the first slave bonded to the channel.  All slaves will then use
 *      this hw mac address.
 *
 *    ifconfig bond0 down
 *         will release all slaves, marking them as down.
 *
 *    ifenslave bond0 eth0
 *      will attach eth0 to bond0 as a slave.  eth0 hw mac address will either
 *      a: be used as initial mac address
 *      b: if a hw mac address already is there, eth0's hw mac address
 *         will then be set from bond0.
 *
 */

//#define BONDING_DEBUG 1

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/fcntl.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <linux/ioport.h>
#include <linux/in.h>
#include <net/ip.h>
#include <linux/ip.h>
#include <linux/tcp.h>
#include <linux/udp.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/timer.h>
#include <linux/socket.h>
#include <linux/ctype.h>
#include <linux/inet.h>
#include <linux/bitops.h>
#include <asm/system.h>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
#include <linux/errno.h>
#include <linux/netdevice.h>
#include <linux/inetdevice.h>
#include <linux/igmp.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <net/sock.h>
#include <linux/rtnetlink.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/smp.h>
#include <linux/if_ether.h>
#include <net/arp.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
#include <linux/if_bonding.h>
#include <linux/jiffies.h>
#include <net/route.h>
#include <net/net_namespace.h>
#include "bonding.h"
#include "bond_3ad.h"
#include "bond_alb.h"

/*---------------------------- Module parameters ----------------------------*/

/* monitor all links that often (in milliseconds). <=0 disables monitoring */
#define BOND_LINK_MON_INTERV    0
#define BOND_LINK_ARP_INTERV    0

static int max_bonds    = BOND_DEFAULT_MAX_BONDS;
static int num_grat_arp = 1;
static int miimon       = BOND_LINK_MON_INTERV;
static int updelay      = 0;
static int downdelay    = 0;
static int use_carrier  = 1;
static char *mode       = NULL;
static char *primary    = NULL;
static char *lacp_rate  = NULL;
static char *xmit_hash_policy = NULL;
static int arp_interval = BOND_LINK_ARP_INTERV;
static char *arp_ip_target[BOND_MAX_ARP_TARGETS] = { NULL, };
static char *arp_validate = NULL;
static char *fail_over_mac = NULL;
struct bond_params bonding_defaults;

module_param(max_bonds, int, 0);
MODULE_PARM_DESC(max_bonds, "Max number of bonded devices");
module_param(num_grat_arp, int, 0644);
MODULE_PARM_DESC(num_grat_arp, "Number of gratuitous ARP packets to send on failover event");
module_param(miimon, int, 0);
MODULE_PARM_DESC(miimon, "Link check interval in milliseconds");
module_param(updelay, int, 0);
MODULE_PARM_DESC(updelay, "Delay before considering link up, in milliseconds");
module_param(downdelay, int, 0);
MODULE_PARM_DESC(downdelay, "Delay before considering link down, "
                            "in milliseconds");
module_param(use_carrier, int, 0);
MODULE_PARM_DESC(use_carrier, "Use netif_carrier_ok (vs MII ioctls) in miimon; "
                              "0 for off, 1 for on (default)");
module_param(mode, charp, 0);
MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
                       "1 for active-backup, 2 for balance-xor, "
                       "3 for broadcast, 4 for 802.3ad, 5 for balance-tlb, "
                       "6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(lacp_rate, charp, 0);
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
                            "(slow/fast)");
module_param(xmit_hash_policy, charp, 0);
MODULE_PARM_DESC(xmit_hash_policy, "XOR hashing method: 0 for layer 2 (default)"
                                   ", 1 for layer 3+4");
module_param(arp_interval, int, 0);
MODULE_PARM_DESC(arp_interval, "arp interval in milliseconds");
module_param_array(arp_ip_target, charp, NULL, 0);
MODULE_PARM_DESC(arp_ip_target, "arp targets in n.n.n.n form");
module_param(arp_validate, charp, 0);
MODULE_PARM_DESC(arp_validate, "validate src/dst of ARP probes: none (default), active, backup or all");
module_param(fail_over_mac, charp, 0);
MODULE_PARM_DESC(fail_over_mac, "For active-backup, do not set all slaves to the same MAC.  none (default), active or follow");

/*----------------------------- Global variables ----------------------------*/

static const char * const version =
        DRV_DESCRIPTION ": v" DRV_VERSION " (" DRV_RELDATE ")\n";

LIST_HEAD(bond_dev_list);

#ifdef CONFIG_PROC_FS
static struct proc_dir_entry *bond_proc_dir = NULL;
#endif

extern struct rw_semaphore bonding_rwsem;
static __be32 arp_target[BOND_MAX_ARP_TARGETS] = { 0, } ;
static int arp_ip_count = 0;
static int bond_mode    = BOND_MODE_ROUNDROBIN;
static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2;
static int lacp_fast    = 0;


struct bond_parm_tbl bond_lacp_tbl[] = {
{       "slow",         AD_LACP_SLOW},
{       "fast",         AD_LACP_FAST},
{       NULL,           -1},
};

struct bond_parm_tbl bond_mode_tbl[] = {
{       "balance-rr",           BOND_MODE_ROUNDROBIN},
{       "active-backup",        BOND_MODE_ACTIVEBACKUP},
{       "balance-xor",          BOND_MODE_XOR},
{       "broadcast",            BOND_MODE_BROADCAST},
{       "802.3ad",              BOND_MODE_8023AD},
{       "balance-tlb",          BOND_MODE_TLB},
{       "balance-alb",          BOND_MODE_ALB},
{       NULL,                   -1},
};

struct bond_parm_tbl xmit_hashtype_tbl[] = {
{       "layer2",               BOND_XMIT_POLICY_LAYER2},
{       "layer3+4",             BOND_XMIT_POLICY_LAYER34},
{       "layer2+3",             BOND_XMIT_POLICY_LAYER23},
{       NULL,                   -1},
};

struct bond_parm_tbl arp_validate_tbl[] = {
{       "none",                 BOND_ARP_VALIDATE_NONE},
{       "active",               BOND_ARP_VALIDATE_ACTIVE},
{       "backup",               BOND_ARP_VALIDATE_BACKUP},
{       "all",                  BOND_ARP_VALIDATE_ALL},
{       NULL,                   -1},
};

struct bond_parm_tbl fail_over_mac_tbl[] = {
{       "none",                 BOND_FOM_NONE},
{       "active",               BOND_FOM_ACTIVE},
{       "follow",               BOND_FOM_FOLLOW},
{       NULL,                   -1},
};

/*-------------------------- Forward declarations ---------------------------*/

static void bond_send_gratuitous_arp(struct bonding *bond);
static void bond_deinit(struct net_device *bond_dev);

/*---------------------------- General routines -----------------------------*/

static const char *bond_mode_name(int mode)
{
        switch (mode) {
        case BOND_MODE_ROUNDROBIN :
                return "load balancing (round-robin)";
        case BOND_MODE_ACTIVEBACKUP :
                return "fault-tolerance (active-backup)";
        case BOND_MODE_XOR :
                return "load balancing (xor)";
        case BOND_MODE_BROADCAST :
                return "fault-tolerance (broadcast)";
        case BOND_MODE_8023AD:
                return "IEEE 802.3ad Dynamic link aggregation";
        case BOND_MODE_TLB:
                return "transmit load balancing";
        case BOND_MODE_ALB:
                return "adaptive load balancing";
        default:
                return "unknown";
        }
}

/*---------------------------------- VLAN -----------------------------------*/

/**
 * bond_add_vlan - add a new vlan id on bond
 * @bond: bond that got the notification
 * @vlan_id: the vlan id to add
 *
 * Returns -ENOMEM if allocation failed.
 */
static int bond_add_vlan(struct bonding *bond, unsigned short vlan_id)
{
        struct vlan_entry *vlan;

        dprintk("bond: %s, vlan id %d\n",
                (bond ? bond->dev->name: "None"), vlan_id);

        vlan = kmalloc(sizeof(struct vlan_entry), GFP_KERNEL);
        if (!vlan) {
                return -ENOMEM;
        }

        INIT_LIST_HEAD(&vlan->vlan_list);
        vlan->vlan_id = vlan_id;
        vlan->vlan_ip = 0;

        write_lock_bh(&bond->lock);

        list_add_tail(&vlan->vlan_list, &bond->vlan_list);

        write_unlock_bh(&bond->lock);

        dprintk("added VLAN ID %d on bond %s\n", vlan_id, bond->dev->name);

        return 0;
}

/**
 * bond_del_vlan - delete a vlan id from bond
 * @bond: bond that got the notification
 * @vlan_id: the vlan id to delete
 *
 * returns -ENODEV if @vlan_id was not found in @bond.
 */
static int bond_del_vlan(struct bonding *bond, unsigned short vlan_id)
{
        struct vlan_entry *vlan;
        int res = -ENODEV;

        dprintk("bond: %s, vlan id %d\n", bond->dev->name, vlan_id);

        write_lock_bh(&bond->lock);

        list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                if (vlan->vlan_id == vlan_id) {
                        list_del(&vlan->vlan_list);

                        if ((bond->params.mode == BOND_MODE_TLB) ||
                            (bond->params.mode == BOND_MODE_ALB)) {
                                bond_alb_clear_vlan(bond, vlan_id);
                        }

                        dprintk("removed VLAN ID %d from bond %s\n", vlan_id,
                                bond->dev->name);

                        kfree(vlan);

                        if (list_empty(&bond->vlan_list) &&
                            (bond->slave_cnt == 0)) {
                                /* Last VLAN removed and no slaves, so
                                 * restore block on adding VLANs. This will
                                 * be removed once new slaves that are not
                                 * VLAN challenged will be added.
                                 */
                                bond->dev->features |= NETIF_F_VLAN_CHALLENGED;
                        }

                        res = 0;
                        goto out;
                }
        }

        dprintk("couldn't find VLAN ID %d in bond %s\n", vlan_id,
                bond->dev->name);

out:
        write_unlock_bh(&bond->lock);
        return res;
}

/**
 * bond_has_challenged_slaves
 * @bond: the bond we're working on
 *
 * Searches the slave list. Returns 1 if a vlan challenged slave
 * was found, 0 otherwise.
 *
 * Assumes bond->lock is held.
 */
static int bond_has_challenged_slaves(struct bonding *bond)
{
        struct slave *slave;
        int i;

        bond_for_each_slave(bond, slave, i) {
                if (slave->dev->features & NETIF_F_VLAN_CHALLENGED) {
                        dprintk("found VLAN challenged slave - %s\n",
                                slave->dev->name);
                        return 1;
                }
        }

        dprintk("no VLAN challenged slaves found\n");
        return 0;
}

/**
 * bond_next_vlan - safely skip to the next item in the vlans list.
 * @bond: the bond we're working on
 * @curr: item we're advancing from
 *
 * Returns %NULL if list is empty, bond->next_vlan if @curr is %NULL,
 * or @curr->next otherwise (even if it is @curr itself again).
 * 
 * Caller must hold bond->lock
 */
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
{
        struct vlan_entry *next, *last;

        if (list_empty(&bond->vlan_list)) {
                return NULL;
        }

        if (!curr) {
                next = list_entry(bond->vlan_list.next,
                                  struct vlan_entry, vlan_list);
        } else {
                last = list_entry(bond->vlan_list.prev,
                                  struct vlan_entry, vlan_list);
                if (last == curr) {
                        next = list_entry(bond->vlan_list.next,
                                          struct vlan_entry, vlan_list);
                } else {
                        next = list_entry(curr->vlan_list.next,
                                          struct vlan_entry, vlan_list);
                }
        }

        return next;
}

/**
 * bond_dev_queue_xmit - Prepare skb for xmit.
 * 
 * @bond: bond device that got this skb for tx.
 * @skb: hw accel VLAN tagged skb to transmit
 * @slave_dev: slave that is supposed to xmit this skbuff
 * 
 * When the bond gets an skb to transmit that is
 * already hardware accelerated VLAN tagged, and it
 * needs to relay this skb to a slave that is not
 * hw accel capable, the skb needs to be "unaccelerated",
 * i.e. strip the hwaccel tag and re-insert it as part
 * of the payload.
 */
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev)
{
        unsigned short uninitialized_var(vlan_id);

        if (!list_empty(&bond->vlan_list) &&
            !(slave_dev->features & NETIF_F_HW_VLAN_TX) &&
            vlan_get_tag(skb, &vlan_id) == 0) {
                skb->dev = slave_dev;
                skb = vlan_put_tag(skb, vlan_id);
                if (!skb) {
                        /* vlan_put_tag() frees the skb in case of error,
                         * so return success here so the calling functions
                         * won't attempt to free is again.
                         */
                        return 0;
                }
        } else {
                skb->dev = slave_dev;
        }

        skb->priority = 1;
        dev_queue_xmit(skb);

        return 0;
}

/*
 * In the following 3 functions, bond_vlan_rx_register(), bond_vlan_rx_add_vid
 * and bond_vlan_rx_kill_vid, We don't protect the slave list iteration with a
 * lock because:
 * a. This operation is performed in IOCTL context,
 * b. The operation is protected by the RTNL semaphore in the 8021q code,
 * c. Holding a lock with BH disabled while directly calling a base driver
 *    entry point is generally a BAD idea.
 * 
 * The design of synchronization/protection for this operation in the 8021q
 * module is good for one or more VLAN devices over a single physical device
 * and cannot be extended for a teaming solution like bonding, so there is a
 * potential race condition here where a net device from the vlan group might
 * be referenced (either by a base driver or the 8021q code) while it is being
 * removed from the system. However, it turns out we're not making matters
 * worse, and if it works for regular VLAN usage it will work here too.
*/

/**
 * bond_vlan_rx_register - Propagates registration to slaves
 * @bond_dev: bonding net device that got called
 * @grp: vlan group being registered
 */
static void bond_vlan_rx_register(struct net_device *bond_dev, struct vlan_group *grp)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave;
        int i;

        bond->vlgrp = grp;

        bond_for_each_slave(bond, slave, i) {
                struct net_device *slave_dev = slave->dev;

                if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
                    slave_dev->vlan_rx_register) {
                        slave_dev->vlan_rx_register(slave_dev, grp);
                }
        }
}

/**
 * bond_vlan_rx_add_vid - Propagates adding an id to slaves
 * @bond_dev: bonding net device that got called
 * @vid: vlan id being added
 */
static void bond_vlan_rx_add_vid(struct net_device *bond_dev, uint16_t vid)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave;
        int i, res;

        bond_for_each_slave(bond, slave, i) {
                struct net_device *slave_dev = slave->dev;

                if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
                    slave_dev->vlan_rx_add_vid) {
                        slave_dev->vlan_rx_add_vid(slave_dev, vid);
                }
        }

        res = bond_add_vlan(bond, vid);
        if (res) {
                printk(KERN_ERR DRV_NAME
                       ": %s: Error: Failed to add vlan id %d\n",
                       bond_dev->name, vid);
        }
}

/**
 * bond_vlan_rx_kill_vid - Propagates deleting an id to slaves
 * @bond_dev: bonding net device that got called
 * @vid: vlan id being removed
 */
static void bond_vlan_rx_kill_vid(struct net_device *bond_dev, uint16_t vid)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave;
        struct net_device *vlan_dev;
        int i, res;

        bond_for_each_slave(bond, slave, i) {
                struct net_device *slave_dev = slave->dev;

                if ((slave_dev->features & NETIF_F_HW_VLAN_FILTER) &&
                    slave_dev->vlan_rx_kill_vid) {
                        /* Save and then restore vlan_dev in the grp array,
                         * since the slave's driver might clear it.
                         */
                        vlan_dev = vlan_group_get_device(bond->vlgrp, vid);
                        slave_dev->vlan_rx_kill_vid(slave_dev, vid);
                        vlan_group_set_device(bond->vlgrp, vid, vlan_dev);
                }
        }

        res = bond_del_vlan(bond, vid);
        if (res) {
                printk(KERN_ERR DRV_NAME
                       ": %s: Error: Failed to remove vlan id %d\n",
                       bond_dev->name, vid);
        }
}

static void bond_add_vlans_on_slave(struct bonding *bond, struct net_device *slave_dev)
{
        struct vlan_entry *vlan;

        write_lock_bh(&bond->lock);

        if (list_empty(&bond->vlan_list)) {
                goto out;
        }

        if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
            slave_dev->vlan_rx_register) {
                slave_dev->vlan_rx_register(slave_dev, bond->vlgrp);
        }

        if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
            !(slave_dev->vlan_rx_add_vid)) {
                goto out;
        }

        list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                slave_dev->vlan_rx_add_vid(slave_dev, vlan->vlan_id);
        }

out:
        write_unlock_bh(&bond->lock);
}

static void bond_del_vlans_from_slave(struct bonding *bond, struct net_device *slave_dev)
{
        struct vlan_entry *vlan;
        struct net_device *vlan_dev;

        write_lock_bh(&bond->lock);

        if (list_empty(&bond->vlan_list)) {
                goto out;
        }

        if (!(slave_dev->features & NETIF_F_HW_VLAN_FILTER) ||
            !(slave_dev->vlan_rx_kill_vid)) {
                goto unreg;
        }

        list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                /* Save and then restore vlan_dev in the grp array,
                 * since the slave's driver might clear it.
                 */
                vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
                slave_dev->vlan_rx_kill_vid(slave_dev, vlan->vlan_id);
                vlan_group_set_device(bond->vlgrp, vlan->vlan_id, vlan_dev);
        }

unreg:
        if ((slave_dev->features & NETIF_F_HW_VLAN_RX) &&
            slave_dev->vlan_rx_register) {
                slave_dev->vlan_rx_register(slave_dev, NULL);
        }

out:
        write_unlock_bh(&bond->lock);
}

/*------------------------------- Link status -------------------------------*/

/*
 * Set the carrier state for the master according to the state of its
 * slaves.  If any slaves are up, the master is up.  In 802.3ad mode,
 * do special 802.3ad magic.
 *
 * Returns zero if carrier state does not change, nonzero if it does.
 */
static int bond_set_carrier(struct bonding *bond)
{
        struct slave *slave;
        int i;

        if (bond->slave_cnt == 0)
                goto down;

        if (bond->params.mode == BOND_MODE_8023AD)
                return bond_3ad_set_carrier(bond);

        bond_for_each_slave(bond, slave, i) {
                if (slave->link == BOND_LINK_UP) {
                        if (!netif_carrier_ok(bond->dev)) {
                                netif_carrier_on(bond->dev);
                                return 1;
                        }
                        return 0;
                }
        }

down:
        if (netif_carrier_ok(bond->dev)) {
                netif_carrier_off(bond->dev);
                return 1;
        }
        return 0;
}

/*
 * Get link speed and duplex from the slave's base driver
 * using ethtool. If for some reason the call fails or the
 * values are invalid, fake speed and duplex to 100/Full
 * and return error.
 */
static int bond_update_speed_duplex(struct slave *slave)
{
        struct net_device *slave_dev = slave->dev;
        struct ethtool_cmd etool;
        int res;

        /* Fake speed and duplex */
        slave->speed = SPEED_100;
        slave->duplex = DUPLEX_FULL;

        if (!slave_dev->ethtool_ops || !slave_dev->ethtool_ops->get_settings)
                return -1;

        res = slave_dev->ethtool_ops->get_settings(slave_dev, &etool);
        if (res < 0)
                return -1;

        switch (etool.speed) {
        case SPEED_10:
        case SPEED_100:
        case SPEED_1000:
        case SPEED_10000:
                break;
        default:
                return -1;
        }

        switch (etool.duplex) {
        case DUPLEX_FULL:
        case DUPLEX_HALF:
                break;
        default:
                return -1;
        }

        slave->speed = etool.speed;
        slave->duplex = etool.duplex;

        return 0;
}

/*
 * if <dev> supports MII link status reporting, check its link status.
 *
 * We either do MII/ETHTOOL ioctls, or check netif_carrier_ok(),
 * depening upon the setting of the use_carrier parameter.
 *
 * Return either BMSR_LSTATUS, meaning that the link is up (or we
 * can't tell and just pretend it is), or 0, meaning that the link is
 * down.
 *
 * If reporting is non-zero, instead of faking link up, return -1 if
 * both ETHTOOL and MII ioctls fail (meaning the device does not
 * support them).  If use_carrier is set, return whatever it says.
 * It'd be nice if there was a good way to tell if a driver supports
 * netif_carrier, but there really isn't.
 */
static int bond_check_dev_link(struct bonding *bond, struct net_device *slave_dev, int reporting)
{
        static int (* ioctl)(struct net_device *, struct ifreq *, int);
        struct ifreq ifr;
        struct mii_ioctl_data *mii;

        if (bond->params.use_carrier) {
                return netif_carrier_ok(slave_dev) ? BMSR_LSTATUS : 0;
        }

        ioctl = slave_dev->do_ioctl;
        if (ioctl) {
                /* TODO: set pointer to correct ioctl on a per team member */
                /*       bases to make this more efficient. that is, once  */
                /*       we determine the correct ioctl, we will always    */
                /*       call it and not the others for that team          */
                /*       member.                                           */

                /*
                 * We cannot assume that SIOCGMIIPHY will also read a
                 * register; not all network drivers (e.g., e100)
                 * support that.
                 */

                /* Yes, the mii is overlaid on the ifreq.ifr_ifru */
                strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
                mii = if_mii(&ifr);
                if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
                        mii->reg_num = MII_BMSR;
                        if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0) {
                                return (mii->val_out & BMSR_LSTATUS);
                        }
                }
        }

        /*
         * Some drivers cache ETHTOOL_GLINK for a period of time so we only
         * attempt to get link status from it if the above MII ioctls fail.
         */
        if (slave_dev->ethtool_ops) {
                if (slave_dev->ethtool_ops->get_link) {
                        u32 link;

                        link = slave_dev->ethtool_ops->get_link(slave_dev);

                        return link ? BMSR_LSTATUS : 0;
                }
        }

        /*
         * If reporting, report that either there's no dev->do_ioctl,
         * or both SIOCGMIIREG and get_link failed (meaning that we
         * cannot report link status).  If not reporting, pretend
         * we're ok.
         */
        return (reporting ? -1 : BMSR_LSTATUS);
}

/*----------------------------- Multicast list ------------------------------*/

/*
 * Returns 0 if dmi1 and dmi2 are the same, non-0 otherwise
 */
static inline int bond_is_dmi_same(struct dev_mc_list *dmi1, struct dev_mc_list *dmi2)
{
        return memcmp(dmi1->dmi_addr, dmi2->dmi_addr, dmi1->dmi_addrlen) == 0 &&
                        dmi1->dmi_addrlen == dmi2->dmi_addrlen;
}

/*
 * returns dmi entry if found, NULL otherwise
 */
static struct dev_mc_list *bond_mc_list_find_dmi(struct dev_mc_list *dmi, struct dev_mc_list *mc_list)
{
        struct dev_mc_list *idmi;

        for (idmi = mc_list; idmi; idmi = idmi->next) {
                if (bond_is_dmi_same(dmi, idmi)) {
                        return idmi;
                }
        }

        return NULL;
}

/*
 * Push the promiscuity flag down to appropriate slaves
 */
static int bond_set_promiscuity(struct bonding *bond, int inc)
{
        int err = 0;
        if (USES_PRIMARY(bond->params.mode)) {
                /* write lock already acquired */
                if (bond->curr_active_slave) {
                        err = dev_set_promiscuity(bond->curr_active_slave->dev,
                                                  inc);
                }
        } else {
                struct slave *slave;
                int i;
                bond_for_each_slave(bond, slave, i) {
                        err = dev_set_promiscuity(slave->dev, inc);
                        if (err)
                                return err;
                }
        }
        return err;
}

/*
 * Push the allmulti flag down to all slaves
 */
static int bond_set_allmulti(struct bonding *bond, int inc)
{
        int err = 0;
        if (USES_PRIMARY(bond->params.mode)) {
                /* write lock already acquired */
                if (bond->curr_active_slave) {
                        err = dev_set_allmulti(bond->curr_active_slave->dev,
                                               inc);
                }
        } else {
                struct slave *slave;
                int i;
                bond_for_each_slave(bond, slave, i) {
                        err = dev_set_allmulti(slave->dev, inc);
                        if (err)
                                return err;
                }
        }
        return err;
}

/*
 * Add a Multicast address to slaves
 * according to mode
 */
static void bond_mc_add(struct bonding *bond, void *addr, int alen)
{
        if (USES_PRIMARY(bond->params.mode)) {
                /* write lock already acquired */
                if (bond->curr_active_slave) {
                        dev_mc_add(bond->curr_active_slave->dev, addr, alen, 0);
                }
        } else {
                struct slave *slave;
                int i;
                bond_for_each_slave(bond, slave, i) {
                        dev_mc_add(slave->dev, addr, alen, 0);
                }
        }
}

/*
 * Remove a multicast address from slave
 * according to mode
 */
static void bond_mc_delete(struct bonding *bond, void *addr, int alen)
{
        if (USES_PRIMARY(bond->params.mode)) {
                /* write lock already acquired */
                if (bond->curr_active_slave) {
                        dev_mc_delete(bond->curr_active_slave->dev, addr, alen, 0);
                }
        } else {
                struct slave *slave;
                int i;
                bond_for_each_slave(bond, slave, i) {
                        dev_mc_delete(slave->dev, addr, alen, 0);
                }
        }
}


/*
 * Retrieve the list of registered multicast addresses for the bonding
 * device and retransmit an IGMP JOIN request to the current active
 * slave.
 */
static void bond_resend_igmp_join_requests(struct bonding *bond)
{
        struct in_device *in_dev;
        struct ip_mc_list *im;

        rcu_read_lock();
        in_dev = __in_dev_get_rcu(bond->dev);
        if (in_dev) {
                for (im = in_dev->mc_list; im; im = im->next) {
                        ip_mc_rejoin_group(im);
                }
        }

        rcu_read_unlock();
}

/*
 * Totally destroys the mc_list in bond
 */
static void bond_mc_list_destroy(struct bonding *bond)
{
        struct dev_mc_list *dmi;

        dmi = bond->mc_list;
        while (dmi) {
                bond->mc_list = dmi->next;
                kfree(dmi);
                dmi = bond->mc_list;
        }
        bond->mc_list = NULL;
}

/*
 * Copy all the Multicast addresses from src to the bonding device dst
 */
static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond,
                             gfp_t gfp_flag)
{
        struct dev_mc_list *dmi, *new_dmi;

        for (dmi = mc_list; dmi; dmi = dmi->next) {
                new_dmi = kmalloc(sizeof(struct dev_mc_list), gfp_flag);

                if (!new_dmi) {
                        /* FIXME: Potential memory leak !!! */
                        return -ENOMEM;
                }

                new_dmi->next = bond->mc_list;
                bond->mc_list = new_dmi;
                new_dmi->dmi_addrlen = dmi->dmi_addrlen;
                memcpy(new_dmi->dmi_addr, dmi->dmi_addr, dmi->dmi_addrlen);
                new_dmi->dmi_users = dmi->dmi_users;
                new_dmi->dmi_gusers = dmi->dmi_gusers;
        }

        return 0;
}

/*
 * flush all members of flush->mc_list from device dev->mc_list
 */
static void bond_mc_list_flush(struct net_device *bond_dev, struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct dev_mc_list *dmi;

        for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
                dev_mc_delete(slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
        }

        if (bond->params.mode == BOND_MODE_8023AD) {
                /* del lacpdu mc addr from mc list */
                u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;

                dev_mc_delete(slave_dev, lacpdu_multicast, ETH_ALEN, 0);
        }
}

/*--------------------------- Active slave change ---------------------------*/

/*
 * Update the mc list and multicast-related flags for the new and
 * old active slaves (if any) according to the multicast mode, and
 * promiscuous flags unconditionally.
 */
static void bond_mc_swap(struct bonding *bond, struct slave *new_active, struct slave *old_active)
{
        struct dev_mc_list *dmi;

        if (!USES_PRIMARY(bond->params.mode)) {
                /* nothing to do -  mc list is already up-to-date on
                 * all slaves
                 */
                return;
        }

        if (old_active) {
                if (bond->dev->flags & IFF_PROMISC) {
                        dev_set_promiscuity(old_active->dev, -1);
                }

                if (bond->dev->flags & IFF_ALLMULTI) {
                        dev_set_allmulti(old_active->dev, -1);
                }

                for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
                        dev_mc_delete(old_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
                }
        }

        if (new_active) {
                /* FIXME: Signal errors upstream. */
                if (bond->dev->flags & IFF_PROMISC) {
                        dev_set_promiscuity(new_active->dev, 1);
                }

                if (bond->dev->flags & IFF_ALLMULTI) {
                        dev_set_allmulti(new_active->dev, 1);
                }

                for (dmi = bond->dev->mc_list; dmi; dmi = dmi->next) {
                        dev_mc_add(new_active->dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
                }
                bond_resend_igmp_join_requests(bond);
        }
}

/*
 * bond_do_fail_over_mac
 *
 * Perform special MAC address swapping for fail_over_mac settings
 *
 * Called with RTNL, bond->lock for read, curr_slave_lock for write_bh.
 */
static void bond_do_fail_over_mac(struct bonding *bond,
                                  struct slave *new_active,
                                  struct slave *old_active)
{
        u8 tmp_mac[ETH_ALEN];
        struct sockaddr saddr;
        int rv;

        switch (bond->params.fail_over_mac) {
        case BOND_FOM_ACTIVE:
                if (new_active)
                        memcpy(bond->dev->dev_addr,  new_active->dev->dev_addr,
                               new_active->dev->addr_len);
                break;
        case BOND_FOM_FOLLOW:
                /*
                 * if new_active && old_active, swap them
                 * if just old_active, do nothing (going to no active slave)
                 * if just new_active, set new_active to bond's MAC
                 */
                if (!new_active)
                        return;

                write_unlock_bh(&bond->curr_slave_lock);
                read_unlock(&bond->lock);

                if (old_active) {
                        memcpy(tmp_mac, new_active->dev->dev_addr, ETH_ALEN);
                        memcpy(saddr.sa_data, old_active->dev->dev_addr,
                               ETH_ALEN);
                        saddr.sa_family = new_active->dev->type;
                } else {
                        memcpy(saddr.sa_data, bond->dev->dev_addr, ETH_ALEN);
                        saddr.sa_family = bond->dev->type;
                }

                rv = dev_set_mac_address(new_active->dev, &saddr);
                if (rv) {
                        printk(KERN_ERR DRV_NAME
                               ": %s: Error %d setting MAC of slave %s\n",
                               bond->dev->name, -rv, new_active->dev->name);
                        goto out;
                }

                if (!old_active)
                        goto out;

                memcpy(saddr.sa_data, tmp_mac, ETH_ALEN);
                saddr.sa_family = old_active->dev->type;

                rv = dev_set_mac_address(old_active->dev, &saddr);
                if (rv)
                        printk(KERN_ERR DRV_NAME
                               ": %s: Error %d setting MAC of slave %s\n",
                               bond->dev->name, -rv, new_active->dev->name);
out:
                read_lock(&bond->lock);
                write_lock_bh(&bond->curr_slave_lock);
                break;
        default:
                printk(KERN_ERR DRV_NAME
                       ": %s: bond_do_fail_over_mac impossible: bad policy %d\n",
                       bond->dev->name, bond->params.fail_over_mac);
                break;
        }

}


/**
 * find_best_interface - select the best available slave to be the active one
 * @bond: our bonding struct
 *
 * Warning: Caller must hold curr_slave_lock for writing.
 */
static struct slave *bond_find_best_slave(struct bonding *bond)
{
        struct slave *new_active, *old_active;
        struct slave *bestslave = NULL;
        int mintime = bond->params.updelay;
        int i;

        new_active = old_active = bond->curr_active_slave;

        if (!new_active) { /* there were no active slaves left */
                if (bond->slave_cnt > 0) {  /* found one slave */
                        new_active = bond->first_slave;
                } else {
                        return NULL; /* still no slave, return NULL */
                }
        }

        /* first try the primary link; if arping, a link must tx/rx traffic
         * before it can be considered the curr_active_slave - also, we would skip
         * slaves between the curr_active_slave and primary_slave that may be up
         * and able to arp
         */
        if ((bond->primary_slave) &&
            (!bond->params.arp_interval) &&
            (IS_UP(bond->primary_slave->dev))) {
                new_active = bond->primary_slave;
        }

        /* remember where to stop iterating over the slaves */
        old_active = new_active;

        bond_for_each_slave_from(bond, new_active, i, old_active) {
                if (IS_UP(new_active->dev)) {
                        if (new_active->link == BOND_LINK_UP) {
                                return new_active;
                        } else if (new_active->link == BOND_LINK_BACK) {
                                /* link up, but waiting for stabilization */
                                if (new_active->delay < mintime) {
                                        mintime = new_active->delay;
                                        bestslave = new_active;
                                }
                        }
                }
        }

        return bestslave;
}

/**
 * change_active_interface - change the active slave into the specified one
 * @bond: our bonding struct
 * @new: the new slave to make the active one
 *
 * Set the new slave to the bond's settings and unset them on the old
 * curr_active_slave.
 * Setting include flags, mc-list, promiscuity, allmulti, etc.
 *
 * If @new's link state is %BOND_LINK_BACK we'll set it to %BOND_LINK_UP,
 * because it is apparently the best available slave we have, even though its
 * updelay hasn't timed out yet.
 *
 * If new_active is not NULL, caller must hold bond->lock for read and
 * curr_slave_lock for write_bh.
 */
void bond_change_active_slave(struct bonding *bond, struct slave *new_active)
{
        struct slave *old_active = bond->curr_active_slave;

        if (old_active == new_active) {
                return;
        }

        if (new_active) {
                new_active->jiffies = jiffies;

                if (new_active->link == BOND_LINK_BACK) {
                        if (USES_PRIMARY(bond->params.mode)) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: making interface %s the new "
                                       "active one %d ms earlier.\n",
                                       bond->dev->name, new_active->dev->name,
                                       (bond->params.updelay - new_active->delay) * bond->params.miimon);
                        }

                        new_active->delay = 0;
                        new_active->link = BOND_LINK_UP;

                        if (bond->params.mode == BOND_MODE_8023AD) {
                                bond_3ad_handle_link_change(new_active, BOND_LINK_UP);
                        }

                        if ((bond->params.mode == BOND_MODE_TLB) ||
                            (bond->params.mode == BOND_MODE_ALB)) {
                                bond_alb_handle_link_change(bond, new_active, BOND_LINK_UP);
                        }
                } else {
                        if (USES_PRIMARY(bond->params.mode)) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: making interface %s the new "
                                       "active one.\n",
                                       bond->dev->name, new_active->dev->name);
                        }
                }
        }

        if (USES_PRIMARY(bond->params.mode)) {
                bond_mc_swap(bond, new_active, old_active);
        }

        if ((bond->params.mode == BOND_MODE_TLB) ||
            (bond->params.mode == BOND_MODE_ALB)) {
                bond_alb_handle_active_change(bond, new_active);
                if (old_active)
                        bond_set_slave_inactive_flags(old_active);
                if (new_active)
                        bond_set_slave_active_flags(new_active);
        } else {
                bond->curr_active_slave = new_active;
        }

        if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) {
                if (old_active) {
                        bond_set_slave_inactive_flags(old_active);
                }

                if (new_active) {
                        bond_set_slave_active_flags(new_active);

                        if (bond->params.fail_over_mac)
                                bond_do_fail_over_mac(bond, new_active,
                                                      old_active);

                        bond->send_grat_arp = bond->params.num_grat_arp;
                        bond_send_gratuitous_arp(bond);

                        write_unlock_bh(&bond->curr_slave_lock);
                        read_unlock(&bond->lock);

                        netdev_bonding_change(bond->dev);

                        read_lock(&bond->lock);
                        write_lock_bh(&bond->curr_slave_lock);
                }
        }
}

/**
 * bond_select_active_slave - select a new active slave, if needed
 * @bond: our bonding struct
 *
 * This functions shoud be called when one of the following occurs:
 * - The old curr_active_slave has been released or lost its link.
 * - The primary_slave has got its link back.
 * - A slave has got its link back and there's no old curr_active_slave.
 *
 * Caller must hold bond->lock for read and curr_slave_lock for write_bh.
 */
void bond_select_active_slave(struct bonding *bond)
{
        struct slave *best_slave;
        int rv;

        best_slave = bond_find_best_slave(bond);
        if (best_slave != bond->curr_active_slave) {
                bond_change_active_slave(bond, best_slave);
                rv = bond_set_carrier(bond);
                if (!rv)
                        return;

                if (netif_carrier_ok(bond->dev)) {
                        printk(KERN_INFO DRV_NAME
                               ": %s: first active interface up!\n",
                               bond->dev->name);
                } else {
                        printk(KERN_INFO DRV_NAME ": %s: "
                               "now running without any active interface !\n",
                               bond->dev->name);
                }
        }
}

/*--------------------------- slave list handling ---------------------------*/

/*
 * This function attaches the slave to the end of list.
 *
 * bond->lock held for writing by caller.
 */
static void bond_attach_slave(struct bonding *bond, struct slave *new_slave)
{
        if (bond->first_slave == NULL) { /* attaching the first slave */
                new_slave->next = new_slave;
                new_slave->prev = new_slave;
                bond->first_slave = new_slave;
        } else {
                new_slave->next = bond->first_slave;
                new_slave->prev = bond->first_slave->prev;
                new_slave->next->prev = new_slave;
                new_slave->prev->next = new_slave;
        }

        bond->slave_cnt++;
}

/*
 * This function detaches the slave from the list.
 * WARNING: no check is made to verify if the slave effectively
 * belongs to <bond>.
 * Nothing is freed on return, structures are just unchained.
 * If any slave pointer in bond was pointing to <slave>,
 * it should be changed by the calling function.
 *
 * bond->lock held for writing by caller.
 */
static void bond_detach_slave(struct bonding *bond, struct slave *slave)
{
        if (slave->next) {
                slave->next->prev = slave->prev;
        }

        if (slave->prev) {
                slave->prev->next = slave->next;
        }

        if (bond->first_slave == slave) { /* slave is the first slave */
                if (bond->slave_cnt > 1) { /* there are more slave */
                        bond->first_slave = slave->next;
                } else {
                        bond->first_slave = NULL; /* slave was the last one */
                }
        }

        slave->next = NULL;
        slave->prev = NULL;
        bond->slave_cnt--;
}

/*---------------------------------- IOCTL ----------------------------------*/

static int bond_sethwaddr(struct net_device *bond_dev,
                          struct net_device *slave_dev)
{
        dprintk("bond_dev=%p\n", bond_dev);
        dprintk("slave_dev=%p\n", slave_dev);
        dprintk("slave_dev->addr_len=%d\n", slave_dev->addr_len);
        memcpy(bond_dev->dev_addr, slave_dev->dev_addr, slave_dev->addr_len);
        return 0;
}

#define BOND_VLAN_FEATURES \
        (NETIF_F_VLAN_CHALLENGED | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_TX | \
         NETIF_F_HW_VLAN_FILTER)

/* 
 * Compute the common dev->feature set available to all slaves.  Some
 * feature bits are managed elsewhere, so preserve those feature bits
 * on the master device.
 */
static int bond_compute_features(struct bonding *bond)
{
        struct slave *slave;
        struct net_device *bond_dev = bond->dev;
        unsigned long features = bond_dev->features;
        unsigned short max_hard_header_len = max((u16)ETH_HLEN,
                                                bond_dev->hard_header_len);
        int i;

        features &= ~(NETIF_F_ALL_CSUM | BOND_VLAN_FEATURES);
        features |=  NETIF_F_GSO_MASK | NETIF_F_NO_CSUM;

        if (!bond->first_slave)
                goto done;

        features &= ~NETIF_F_ONE_FOR_ALL;

        bond_for_each_slave(bond, slave, i) {
                features = netdev_increment_features(features,
                                                     slave->dev->features,
                                                     NETIF_F_ONE_FOR_ALL);
                if (slave->dev->hard_header_len > max_hard_header_len)
                        max_hard_header_len = slave->dev->hard_header_len;
        }

done:
        features |= (bond_dev->features & BOND_VLAN_FEATURES);
        bond_dev->features = netdev_fix_features(features, NULL);
        bond_dev->hard_header_len = max_hard_header_len;

        return 0;
}


static void bond_setup_by_slave(struct net_device *bond_dev,
                                struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;

        bond_dev->neigh_setup           = slave_dev->neigh_setup;
        bond_dev->header_ops            = slave_dev->header_ops;

        bond_dev->type              = slave_dev->type;
        bond_dev->hard_header_len   = slave_dev->hard_header_len;
        bond_dev->addr_len          = slave_dev->addr_len;

        memcpy(bond_dev->broadcast, slave_dev->broadcast,
                slave_dev->addr_len);
        bond->setup_by_slave = 1;
}

/* enslave device <slave> to bond device <master> */
int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *new_slave = NULL;
        struct dev_mc_list *dmi;
        struct sockaddr addr;
        int link_reporting;
        int old_features = bond_dev->features;
        int res = 0;

        if (!bond->params.use_carrier && slave_dev->ethtool_ops == NULL &&
                slave_dev->do_ioctl == NULL) {
                printk(KERN_WARNING DRV_NAME
                       ": %s: Warning: no link monitoring support for %s\n",
                       bond_dev->name, slave_dev->name);
        }

        /* bond must be initialized by bond_open() before enslaving */
        if (!(bond_dev->flags & IFF_UP)) {
                printk(KERN_WARNING DRV_NAME
                        " %s: master_dev is not up in bond_enslave\n",
                        bond_dev->name);
        }

        /* already enslaved */
        if (slave_dev->flags & IFF_SLAVE) {
                dprintk("Error, Device was already enslaved\n");
                return -EBUSY;
        }

        /* vlan challenged mutual exclusion */
        /* no need to lock since we're protected by rtnl_lock */
        if (slave_dev->features & NETIF_F_VLAN_CHALLENGED) {
                dprintk("%s: NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
                if (!list_empty(&bond->vlan_list)) {
                        printk(KERN_ERR DRV_NAME
                               ": %s: Error: cannot enslave VLAN "
                               "challenged slave %s on VLAN enabled "
                               "bond %s\n", bond_dev->name, slave_dev->name,
                               bond_dev->name);
                        return -EPERM;
                } else {
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: enslaved VLAN challenged "
                               "slave %s. Adding VLANs will be blocked as "
                               "long as %s is part of bond %s\n",
                               bond_dev->name, slave_dev->name, slave_dev->name,
                               bond_dev->name);
                        bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
                }
        } else {
                dprintk("%s: ! NETIF_F_VLAN_CHALLENGED\n", slave_dev->name);
                if (bond->slave_cnt == 0) {
                        /* First slave, and it is not VLAN challenged,
                         * so remove the block of adding VLANs over the bond.
                         */
                        bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
                }
        }

        /*
         * Old ifenslave binaries are no longer supported.  These can
         * be identified with moderate accurary by the state of the slave:
         * the current ifenslave will set the interface down prior to
         * enslaving it; the old ifenslave will not.
         */
        if ((slave_dev->flags & IFF_UP)) {
                printk(KERN_ERR DRV_NAME ": %s is up. "
                       "This may be due to an out of date ifenslave.\n",
                       slave_dev->name);
                res = -EPERM;
                goto err_undo_flags;
        }

        /* set bonding device ether type by slave - bonding netdevices are
         * created with ether_setup, so when the slave type is not ARPHRD_ETHER
         * there is a need to override some of the type dependent attribs/funcs.
         *
         * bond ether type mutual exclusion - don't allow slaves of dissimilar
         * ether type (eg ARPHRD_ETHER and ARPHRD_INFINIBAND) share the same bond
         */
        if (bond->slave_cnt == 0) {
                if (slave_dev->type != ARPHRD_ETHER)
                        bond_setup_by_slave(bond_dev, slave_dev);
        } else if (bond_dev->type != slave_dev->type) {
                printk(KERN_ERR DRV_NAME ": %s ether type (%d) is different "
                        "from other slaves (%d), can not enslave it.\n",
                        slave_dev->name,
                        slave_dev->type, bond_dev->type);
                        res = -EINVAL;
                        goto err_undo_flags;
        }

        if (slave_dev->set_mac_address == NULL) {
                if (bond->slave_cnt == 0) {
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: The first slave device "
                               "specified does not support setting the MAC "
                               "address. Setting fail_over_mac to active.",
                               bond_dev->name);
                        bond->params.fail_over_mac = BOND_FOM_ACTIVE;
                } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
                        printk(KERN_ERR DRV_NAME
                                ": %s: Error: The slave device specified "
                                "does not support setting the MAC address, "
                                "but fail_over_mac is not set to active.\n"
                                , bond_dev->name);
                        res = -EOPNOTSUPP;
                        goto err_undo_flags;
                }
        }

        new_slave = kzalloc(sizeof(struct slave), GFP_KERNEL);
        if (!new_slave) {
                res = -ENOMEM;
                goto err_undo_flags;
        }

        /* save slave's original flags before calling
         * netdev_set_master and dev_open
         */
        new_slave->original_flags = slave_dev->flags;

        /*
         * Save slave's original ("permanent") mac address for modes
         * that need it, and for restoring it upon release, and then
         * set it to the master's address
         */
        memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN);

        if (!bond->params.fail_over_mac) {
                /*
                 * Set slave to master's mac address.  The application already
                 * set the master's mac address to that of the first slave
                 */
                memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
                addr.sa_family = slave_dev->type;
                res = dev_set_mac_address(slave_dev, &addr);
                if (res) {
                        dprintk("Error %d calling set_mac_address\n", res);
                        goto err_free;
                }
        }

        res = netdev_set_master(slave_dev, bond_dev);
        if (res) {
                dprintk("Error %d calling netdev_set_master\n", res);
                goto err_restore_mac;
        }
        /* open the slave since the application closed it */
        res = dev_open(slave_dev);
        if (res) {
                dprintk("Openning slave %s failed\n", slave_dev->name);
                goto err_unset_master;
        }

        new_slave->dev = slave_dev;
        slave_dev->priv_flags |= IFF_BONDING;

        if ((bond->params.mode == BOND_MODE_TLB) ||
            (bond->params.mode == BOND_MODE_ALB)) {
                /* bond_alb_init_slave() must be called before all other stages since
                 * it might fail and we do not want to have to undo everything
                 */
                res = bond_alb_init_slave(bond, new_slave);
                if (res) {
                        goto err_close;
                }
        }

        /* If the mode USES_PRIMARY, then the new slave gets the
         * master's promisc (and mc) settings only if it becomes the
         * curr_active_slave, and that is taken care of later when calling
         * bond_change_active()
         */
        if (!USES_PRIMARY(bond->params.mode)) {
                /* set promiscuity level to new slave */
                if (bond_dev->flags & IFF_PROMISC) {
                        res = dev_set_promiscuity(slave_dev, 1);
                        if (res)
                                goto err_close;
                }

                /* set allmulti level to new slave */
                if (bond_dev->flags & IFF_ALLMULTI) {
                        res = dev_set_allmulti(slave_dev, 1);
                        if (res)
                                goto err_close;
                }

                netif_addr_lock_bh(bond_dev);
                /* upload master's mc_list to new slave */
                for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
                        dev_mc_add (slave_dev, dmi->dmi_addr, dmi->dmi_addrlen, 0);
                }
                netif_addr_unlock_bh(bond_dev);
        }

        if (bond->params.mode == BOND_MODE_8023AD) {
                /* add lacpdu mc addr to mc list */
                u8 lacpdu_multicast[ETH_ALEN] = MULTICAST_LACPDU_ADDR;

                dev_mc_add(slave_dev, lacpdu_multicast, ETH_ALEN, 0);
        }

        bond_add_vlans_on_slave(bond, slave_dev);

        write_lock_bh(&bond->lock);

        bond_attach_slave(bond, new_slave);

        new_slave->delay = 0;
        new_slave->link_failure_count = 0;

        bond_compute_features(bond);

        write_unlock_bh(&bond->lock);

        read_lock(&bond->lock);

        new_slave->last_arp_rx = jiffies;

        if (bond->params.miimon && !bond->params.use_carrier) {
                link_reporting = bond_check_dev_link(bond, slave_dev, 1);

                if ((link_reporting == -1) && !bond->params.arp_interval) {
                        /*
                         * miimon is set but a bonded network driver
                         * does not support ETHTOOL/MII and
                         * arp_interval is not set.  Note: if
                         * use_carrier is enabled, we will never go
                         * here (because netif_carrier is always
                         * supported); thus, we don't need to change
                         * the messages for netif_carrier.
                         */
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: MII and ETHTOOL support not "
                               "available for interface %s, and "
                               "arp_interval/arp_ip_target module parameters "
                               "not specified, thus bonding will not detect "
                               "link failures! see bonding.txt for details.\n",
                               bond_dev->name, slave_dev->name);
                } else if (link_reporting == -1) {
                        /* unable get link status using mii/ethtool */
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: can't get link status from "
                               "interface %s; the network driver associated "
                               "with this interface does not support MII or "
                               "ETHTOOL link status reporting, thus miimon "
                               "has no effect on this interface.\n",
                               bond_dev->name, slave_dev->name);
                }
        }

        /* check for initial state */
        if (!bond->params.miimon ||
            (bond_check_dev_link(bond, slave_dev, 0) == BMSR_LSTATUS)) {
                if (bond->params.updelay) {
                        dprintk("Initial state of slave_dev is "
                                "BOND_LINK_BACK\n");
                        new_slave->link  = BOND_LINK_BACK;
                        new_slave->delay = bond->params.updelay;
                } else {
                        dprintk("Initial state of slave_dev is "
                                "BOND_LINK_UP\n");
                        new_slave->link  = BOND_LINK_UP;
                }
                new_slave->jiffies = jiffies;
        } else {
                dprintk("Initial state of slave_dev is "
                        "BOND_LINK_DOWN\n");
                new_slave->link  = BOND_LINK_DOWN;
        }

        if (bond_update_speed_duplex(new_slave) &&
            (new_slave->link != BOND_LINK_DOWN)) {
                printk(KERN_WARNING DRV_NAME
                       ": %s: Warning: failed to get speed and duplex from %s, "
                       "assumed to be 100Mb/sec and Full.\n",
                       bond_dev->name, new_slave->dev->name);

                if (bond->params.mode == BOND_MODE_8023AD) {
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: Operation of 802.3ad mode requires ETHTOOL "
                               "support in base driver for proper aggregator "
                               "selection.\n", bond_dev->name);
                }
        }

        if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
                /* if there is a primary slave, remember it */
                if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
                        bond->primary_slave = new_slave;
                }
        }

        write_lock_bh(&bond->curr_slave_lock);

        switch (bond->params.mode) {
        case BOND_MODE_ACTIVEBACKUP:
                bond_set_slave_inactive_flags(new_slave);
                bond_select_active_slave(bond);
                break;
        case BOND_MODE_8023AD:
                /* in 802.3ad mode, the internal mechanism
                 * will activate the slaves in the selected
                 * aggregator
                 */
                bond_set_slave_inactive_flags(new_slave);
                /* if this is the first slave */
                if (bond->slave_cnt == 1) {
                        SLAVE_AD_INFO(new_slave).id = 1;
                        /* Initialize AD with the number of times that the AD timer is called in 1 second
                         * can be called only after the mac address of the bond is set
                         */
                        bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL,
                                            bond->params.lacp_fast);
                } else {
                        SLAVE_AD_INFO(new_slave).id =
                                SLAVE_AD_INFO(new_slave->prev).id + 1;
                }

                bond_3ad_bind_slave(new_slave);
                break;
        case BOND_MODE_TLB:
        case BOND_MODE_ALB:
                new_slave->state = BOND_STATE_ACTIVE;
                bond_set_slave_inactive_flags(new_slave);
                break;
        default:
                dprintk("This slave is always active in trunk mode\n");

                /* always active in trunk mode */
                new_slave->state = BOND_STATE_ACTIVE;

                /* In trunking mode there is little meaning to curr_active_slave
                 * anyway (it holds no special properties of the bond device),
                 * so we can change it without calling change_active_interface()
                 */
                if (!bond->curr_active_slave) {
                        bond->curr_active_slave = new_slave;
                }
                break;
        } /* switch(bond_mode) */

        write_unlock_bh(&bond->curr_slave_lock);

        bond_set_carrier(bond);

        read_unlock(&bond->lock);

        res = bond_create_slave_symlinks(bond_dev, slave_dev);
        if (res)
                goto err_close;

        printk(KERN_INFO DRV_NAME
               ": %s: enslaving %s as a%s interface with a%s link.\n",
               bond_dev->name, slave_dev->name,
               new_slave->state == BOND_STATE_ACTIVE ? "n active" : " backup",
               new_slave->link != BOND_LINK_DOWN ? "n up" : " down");

        /* enslave is successful */
        return 0;

/* Undo stages on error */
err_close:
        dev_close(slave_dev);

err_unset_master:
        netdev_set_master(slave_dev, NULL);

err_restore_mac:
        if (!bond->params.fail_over_mac) {
                /* XXX TODO - fom follow mode needs to change master's
                 * MAC if this slave's MAC is in use by the bond, or at
                 * least print a warning.
                 */
                memcpy(addr.sa_data, new_slave->perm_hwaddr, ETH_ALEN);
                addr.sa_family = slave_dev->type;
                dev_set_mac_address(slave_dev, &addr);
        }

err_free:
        kfree(new_slave);

err_undo_flags:
        bond_dev->features = old_features;
 
        return res;
}

/*
 * Try to release the slave device <slave> from the bond device <master>
 * It is legal to access curr_active_slave without a lock because all the function
 * is write-locked.
 *
 * The rules for slave state should be:
 *   for Active/Backup:
 *     Active stays on all backups go down
 *   for Bonded connections:
 *     The first up interface should be left on and all others downed.
 */
int bond_release(struct net_device *bond_dev, struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave, *oldcurrent;
        struct sockaddr addr;
        int mac_addr_differ;

        /* slave is not a slave or master is not master of this slave */
        if (!(slave_dev->flags & IFF_SLAVE) ||
            (slave_dev->master != bond_dev)) {
                printk(KERN_ERR DRV_NAME
                       ": %s: Error: cannot release %s.\n",
                       bond_dev->name, slave_dev->name);
                return -EINVAL;
        }

        write_lock_bh(&bond->lock);

        slave = bond_get_slave_by_dev(bond, slave_dev);
        if (!slave) {
                /* not a slave of this bond */
                printk(KERN_INFO DRV_NAME
                       ": %s: %s not enslaved\n",
                       bond_dev->name, slave_dev->name);
                write_unlock_bh(&bond->lock);
                return -EINVAL;
        }

        if (!bond->params.fail_over_mac) {
                mac_addr_differ = memcmp(bond_dev->dev_addr, slave->perm_hwaddr,
                                         ETH_ALEN);
                if (!mac_addr_differ && (bond->slave_cnt > 1))
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: the permanent HWaddr of %s - "
                               "%pM - is still in use by %s. "
                               "Set the HWaddr of %s to a different address "
                               "to avoid conflicts.\n",
                               bond_dev->name, slave_dev->name,
                               slave->perm_hwaddr,
                               bond_dev->name, slave_dev->name);
        }

        /* Inform AD package of unbinding of slave. */
        if (bond->params.mode == BOND_MODE_8023AD) {
                /* must be called before the slave is
                 * detached from the list
                 */
                bond_3ad_unbind_slave(slave);
        }

        printk(KERN_INFO DRV_NAME
               ": %s: releasing %s interface %s\n",
               bond_dev->name,
               (slave->state == BOND_STATE_ACTIVE)
               ? "active" : "backup",
               slave_dev->name);

        oldcurrent = bond->curr_active_slave;

        bond->current_arp_slave = NULL;

        /* release the slave from its bond */
        bond_detach_slave(bond, slave);

        bond_compute_features(bond);

        if (bond->primary_slave == slave) {
                bond->primary_slave = NULL;
        }

        if (oldcurrent == slave) {
                bond_change_active_slave(bond, NULL);
        }

        if ((bond->params.mode == BOND_MODE_TLB) ||
            (bond->params.mode == BOND_MODE_ALB)) {
                /* Must be called only after the slave has been
                 * detached from the list and the curr_active_slave
                 * has been cleared (if our_slave == old_current),
                 * but before a new active slave is selected.
                 */
                write_unlock_bh(&bond->lock);
                bond_alb_deinit_slave(bond, slave);
                write_lock_bh(&bond->lock);
        }

        if (oldcurrent == slave) {
                /*
                 * Note that we hold RTNL over this sequence, so there
                 * is no concern that another slave add/remove event
                 * will interfere.
                 */
                write_unlock_bh(&bond->lock);
                read_lock(&bond->lock);
                write_lock_bh(&bond->curr_slave_lock);

                bond_select_active_slave(bond);

                write_unlock_bh(&bond->curr_slave_lock);
                read_unlock(&bond->lock);
                write_lock_bh(&bond->lock);
        }

        if (bond->slave_cnt == 0) {
                bond_set_carrier(bond);

                /* if the last slave was removed, zero the mac address
                 * of the master so it will be set by the application
                 * to the mac address of the first slave
                 */
                memset(bond_dev->dev_addr, 0, bond_dev->addr_len);

                if (list_empty(&bond->vlan_list)) {
                        bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
                } else {
                        printk(KERN_WARNING DRV_NAME
                               ": %s: Warning: clearing HW address of %s while it "
                               "still has VLANs.\n",
                               bond_dev->name, bond_dev->name);
                        printk(KERN_WARNING DRV_NAME
                               ": %s: When re-adding slaves, make sure the bond's "
                               "HW address matches its VLANs'.\n",
                               bond_dev->name);
                }
        } else if ((bond_dev->features & NETIF_F_VLAN_CHALLENGED) &&
                   !bond_has_challenged_slaves(bond)) {
                printk(KERN_INFO DRV_NAME
                       ": %s: last VLAN challenged slave %s "
                       "left bond %s. VLAN blocking is removed\n",
                       bond_dev->name, slave_dev->name, bond_dev->name);
                bond_dev->features &= ~NETIF_F_VLAN_CHALLENGED;
        }

        write_unlock_bh(&bond->lock);

        /* must do this from outside any spinlocks */
        bond_destroy_slave_symlinks(bond_dev, slave_dev);

        bond_del_vlans_from_slave(bond, slave_dev);

        /* If the mode USES_PRIMARY, then we should only remove its
         * promisc and mc settings if it was the curr_active_slave, but that was
         * already taken care of above when we detached the slave
         */
        if (!USES_PRIMARY(bond->params.mode)) {
                /* unset promiscuity level from slave */
                if (bond_dev->flags & IFF_PROMISC) {
                        dev_set_promiscuity(slave_dev, -1);
                }

                /* unset allmulti level from slave */
                if (bond_dev->flags & IFF_ALLMULTI) {
                        dev_set_allmulti(slave_dev, -1);
                }

                /* flush master's mc_list from slave */
                netif_addr_lock_bh(bond_dev);
                bond_mc_list_flush(bond_dev, slave_dev);
                netif_addr_unlock_bh(bond_dev);
        }

        netdev_set_master(slave_dev, NULL);

        /* close slave before restoring its mac address */
        dev_close(slave_dev);

        if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) {
                /* restore original ("permanent") mac address */
                memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
                addr.sa_family = slave_dev->type;
                dev_set_mac_address(slave_dev, &addr);
        }

        slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
                                   IFF_SLAVE_INACTIVE | IFF_BONDING |
                                   IFF_SLAVE_NEEDARP);

        kfree(slave);

        return 0;  /* deletion OK */
}

/*
* Destroy a bonding device.
* Must be under rtnl_lock when this function is called.
*/
void bond_destroy(struct bonding *bond)
{
        bond_deinit(bond->dev);
        bond_destroy_sysfs_entry(bond);
        unregister_netdevice(bond->dev);
}

/*
* First release a slave and than destroy the bond if no more slaves iare left.
* Must be under rtnl_lock when this function is called.
*/
int  bond_release_and_destroy(struct net_device *bond_dev, struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;
        int ret;

        ret = bond_release(bond_dev, slave_dev);
        if ((ret == 0) && (bond->slave_cnt == 0)) {
                printk(KERN_INFO DRV_NAME ": %s: destroying bond %s.\n",
                       bond_dev->name, bond_dev->name);
                bond_destroy(bond);
        }
        return ret;
}

/*
 * This function releases all slaves.
 */
static int bond_release_all(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave;
        struct net_device *slave_dev;
        struct sockaddr addr;

        write_lock_bh(&bond->lock);

        netif_carrier_off(bond_dev);

        if (bond->slave_cnt == 0) {
                goto out;
        }

        bond->current_arp_slave = NULL;
        bond->primary_slave = NULL;
        bond_change_active_slave(bond, NULL);

        while ((slave = bond->first_slave) != NULL) {
                /* Inform AD package of unbinding of slave
                 * before slave is detached from the list.
                 */
                if (bond->params.mode == BOND_MODE_8023AD) {
                        bond_3ad_unbind_slave(slave);
                }

                slave_dev = slave->dev;
                bond_detach_slave(bond, slave);

                /* now that the slave is detached, unlock and perform
                 * all the undo steps that should not be called from
                 * within a lock.
                 */
                write_unlock_bh(&bond->lock);

                if ((bond->params.mode == BOND_MODE_TLB) ||
                    (bond->params.mode == BOND_MODE_ALB)) {
                        /* must be called only after the slave
                         * has been detached from the list
                         */
                        bond_alb_deinit_slave(bond, slave);
                }

                bond_compute_features(bond);

                bond_destroy_slave_symlinks(bond_dev, slave_dev);
                bond_del_vlans_from_slave(bond, slave_dev);

                /* If the mode USES_PRIMARY, then we should only remove its
                 * promisc and mc settings if it was the curr_active_slave, but that was
                 * already taken care of above when we detached the slave
                 */
                if (!USES_PRIMARY(bond->params.mode)) {
                        /* unset promiscuity level from slave */
                        if (bond_dev->flags & IFF_PROMISC) {
                                dev_set_promiscuity(slave_dev, -1);
                        }

                        /* unset allmulti level from slave */
                        if (bond_dev->flags & IFF_ALLMULTI) {
                                dev_set_allmulti(slave_dev, -1);
                        }

                        /* flush master's mc_list from slave */
                        netif_addr_lock_bh(bond_dev);
                        bond_mc_list_flush(bond_dev, slave_dev);
                        netif_addr_unlock_bh(bond_dev);
                }

                netdev_set_master(slave_dev, NULL);

                /* close slave before restoring its mac address */
                dev_close(slave_dev);

                if (!bond->params.fail_over_mac) {
                        /* restore original ("permanent") mac address*/
                        memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN);
                        addr.sa_family = slave_dev->type;
                        dev_set_mac_address(slave_dev, &addr);
                }

                slave_dev->priv_flags &= ~(IFF_MASTER_8023AD | IFF_MASTER_ALB |
                                           IFF_SLAVE_INACTIVE);

                kfree(slave);

                /* re-acquire the lock before getting the next slave */
                write_lock_bh(&bond->lock);
        }

        /* zero the mac address of the master so it will be
         * set by the application to the mac address of the
         * first slave
         */
        memset(bond_dev->dev_addr, 0, bond_dev->addr_len);

        if (list_empty(&bond->vlan_list)) {
                bond_dev->features |= NETIF_F_VLAN_CHALLENGED;
        } else {
                printk(KERN_WARNING DRV_NAME
                       ": %s: Warning: clearing HW address of %s while it "
                       "still has VLANs.\n",
                       bond_dev->name, bond_dev->name);
                printk(KERN_WARNING DRV_NAME
                       ": %s: When re-adding slaves, make sure the bond's "
                       "HW address matches its VLANs'.\n",
                       bond_dev->name);
        }

        printk(KERN_INFO DRV_NAME
               ": %s: released all slaves\n",
               bond_dev->name);

out:
        write_unlock_bh(&bond->lock);

        return 0;
}

/*
 * This function changes the active slave to slave <slave_dev>.
 * It returns -EINVAL in the following cases.
 *  - <slave_dev> is not found in the list.
 *  - There is not active slave now.
 *  - <slave_dev> is already active.
 *  - The link state of <slave_dev> is not BOND_LINK_UP.
 *  - <slave_dev> is not running.
 * In these cases, this fuction does nothing.
 * In the other cases, currnt_slave pointer is changed and 0 is returned.
 */
static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_device *slave_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *old_active = NULL;
        struct slave *new_active = NULL;
        int res = 0;

        if (!USES_PRIMARY(bond->params.mode)) {
                return -EINVAL;
        }

        /* Verify that master_dev is indeed the master of slave_dev */
        if (!(slave_dev->flags & IFF_SLAVE) ||
            (slave_dev->master != bond_dev)) {
                return -EINVAL;
        }

        read_lock(&bond->lock);

        read_lock(&bond->curr_slave_lock);
        old_active = bond->curr_active_slave;
        read_unlock(&bond->curr_slave_lock);

        new_active = bond_get_slave_by_dev(bond, slave_dev);

        /*
         * Changing to the current active: do nothing; return success.
         */
        if (new_active && (new_active == old_active)) {
                read_unlock(&bond->lock);
                return 0;
        }

        if ((new_active) &&
            (old_active) &&
            (new_active->link == BOND_LINK_UP) &&
            IS_UP(new_active->dev)) {
                write_lock_bh(&bond->curr_slave_lock);
                bond_change_active_slave(bond, new_active);
                write_unlock_bh(&bond->curr_slave_lock);
        } else {
                res = -EINVAL;
        }

        read_unlock(&bond->lock);

        return res;
}

static int bond_info_query(struct net_device *bond_dev, struct ifbond *info)
{
        struct bonding *bond = bond_dev->priv;

        info->bond_mode = bond->params.mode;
        info->miimon = bond->params.miimon;

        read_lock(&bond->lock);
        info->num_slaves = bond->slave_cnt;
        read_unlock(&bond->lock);

        return 0;
}

static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *info)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave;
        int i, found = 0;

        if (info->slave_id < 0) {
                return -ENODEV;
        }

        read_lock(&bond->lock);

        bond_for_each_slave(bond, slave, i) {
                if (i == (int)info->slave_id) {
                        found = 1;
                        break;
                }
        }

        read_unlock(&bond->lock);

        if (found) {
                strcpy(info->slave_name, slave->dev->name);
                info->link = slave->link;
                info->state = slave->state;
                info->link_failure_count = slave->link_failure_count;
        } else {
                return -ENODEV;
        }

        return 0;
}

/*-------------------------------- Monitoring -------------------------------*/


static int bond_miimon_inspect(struct bonding *bond)
{
        struct slave *slave;
        int i, link_state, commit = 0;

        bond_for_each_slave(bond, slave, i) {
                slave->new_link = BOND_LINK_NOCHANGE;

                link_state = bond_check_dev_link(bond, slave->dev, 0);

                switch (slave->link) {
                case BOND_LINK_UP:
                        if (link_state)
                                continue;

                        slave->link = BOND_LINK_FAIL;
                        slave->delay = bond->params.downdelay;
                        if (slave->delay) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: link status down for %s"
                                       "interface %s, disabling it in %d ms.\n",
                                       bond->dev->name,
                                       (bond->params.mode ==
                                        BOND_MODE_ACTIVEBACKUP) ?
                                       ((slave->state == BOND_STATE_ACTIVE) ?
                                        "active " : "backup ") : "",
                                       slave->dev->name,
                                       bond->params.downdelay * bond->params.miimon);
                        }
                        /*FALLTHRU*/
                case BOND_LINK_FAIL:
                        if (link_state) {
                                /*
                                 * recovered before downdelay expired
                                 */
                                slave->link = BOND_LINK_UP;
                                slave->jiffies = jiffies;
                                printk(KERN_INFO DRV_NAME
                                       ": %s: link status up again after %d "
                                       "ms for interface %s.\n",
                                       bond->dev->name,
                                       (bond->params.downdelay - slave->delay) *
                                       bond->params.miimon,
                                       slave->dev->name);
                                continue;
                        }

                        if (slave->delay <= 0) {
                                slave->new_link = BOND_LINK_DOWN;
                                commit++;
                                continue;
                        }

                        slave->delay--;
                        break;

                case BOND_LINK_DOWN:
                        if (!link_state)
                                continue;

                        slave->link = BOND_LINK_BACK;
                        slave->delay = bond->params.updelay;

                        if (slave->delay) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: link status up for "
                                       "interface %s, enabling it in %d ms.\n",
                                       bond->dev->name, slave->dev->name,
                                       bond->params.updelay *
                                       bond->params.miimon);
                        }
                        /*FALLTHRU*/
                case BOND_LINK_BACK:
                        if (!link_state) {
                                slave->link = BOND_LINK_DOWN;
                                printk(KERN_INFO DRV_NAME
                                       ": %s: link status down again after %d "
                                       "ms for interface %s.\n",
                                       bond->dev->name,
                                       (bond->params.updelay - slave->delay) *
                                       bond->params.miimon,
                                       slave->dev->name);

                                continue;
                        }

                        if (slave->delay <= 0) {
                                slave->new_link = BOND_LINK_UP;
                                commit++;
                                continue;
                        }

                        slave->delay--;
                        break;
                }
        }

        return commit;
}

static void bond_miimon_commit(struct bonding *bond)
{
        struct slave *slave;
        int i;

        bond_for_each_slave(bond, slave, i) {
                switch (slave->new_link) {
                case BOND_LINK_NOCHANGE:
                        continue;

                case BOND_LINK_UP:
                        slave->link = BOND_LINK_UP;
                        slave->jiffies = jiffies;

                        if (bond->params.mode == BOND_MODE_8023AD) {
                                /* prevent it from being the active one */
                                slave->state = BOND_STATE_BACKUP;
                        } else if (bond->params.mode != BOND_MODE_ACTIVEBACKUP) {
                                /* make it immediately active */
                                slave->state = BOND_STATE_ACTIVE;
                        } else if (slave != bond->primary_slave) {
                                /* prevent it from being the active one */
                                slave->state = BOND_STATE_BACKUP;
                        }

                        printk(KERN_INFO DRV_NAME
                               ": %s: link status definitely "
                               "up for interface %s.\n",
                               bond->dev->name, slave->dev->name);

                        /* notify ad that the link status has changed */
                        if (bond->params.mode == BOND_MODE_8023AD)
                                bond_3ad_handle_link_change(slave, BOND_LINK_UP);

                        if ((bond->params.mode == BOND_MODE_TLB) ||
                            (bond->params.mode == BOND_MODE_ALB))
                                bond_alb_handle_link_change(bond, slave,
                                                            BOND_LINK_UP);

                        if (!bond->curr_active_slave ||
                            (slave == bond->primary_slave))
                                goto do_failover;

                        continue;

                case BOND_LINK_DOWN:
                        slave->link = BOND_LINK_DOWN;

                        if (bond->params.mode == BOND_MODE_ACTIVEBACKUP ||
                            bond->params.mode == BOND_MODE_8023AD)
                                bond_set_slave_inactive_flags(slave);

                        printk(KERN_INFO DRV_NAME
                               ": %s: link status definitely down for "
                               "interface %s, disabling it\n",
                               bond->dev->name, slave->dev->name);

                        if (bond->params.mode == BOND_MODE_8023AD)
                                bond_3ad_handle_link_change(slave,
                                                            BOND_LINK_DOWN);

                        if (bond->params.mode == BOND_MODE_TLB ||
                            bond->params.mode == BOND_MODE_ALB)
                                bond_alb_handle_link_change(bond, slave,
                                                            BOND_LINK_DOWN);

                        if (slave == bond->curr_active_slave)
                                goto do_failover;

                        continue;

                default:
                        printk(KERN_ERR DRV_NAME
                               ": %s: invalid new link %d on slave %s\n",
                               bond->dev->name, slave->new_link,
                               slave->dev->name);
                        slave->new_link = BOND_LINK_NOCHANGE;

                        continue;
                }

do_failover:
                ASSERT_RTNL();
                write_lock_bh(&bond->curr_slave_lock);
                bond_select_active_slave(bond);
                write_unlock_bh(&bond->curr_slave_lock);
        }

        bond_set_carrier(bond);
}

/*
 * bond_mii_monitor
 *
 * Really a wrapper that splits the mii monitor into two phases: an
 * inspection, then (if inspection indicates something needs to be done)
 * an acquisition of appropriate locks followed by a commit phase to
 * implement whatever link state changes are indicated.
 */
void bond_mii_monitor(struct work_struct *work)
{
        struct bonding *bond = container_of(work, struct bonding,
                                            mii_work.work);

        read_lock(&bond->lock);
        if (bond->kill_timers)
                goto out;

        if (bond->slave_cnt == 0)
                goto re_arm;

        if (bond->send_grat_arp) {
                read_lock(&bond->curr_slave_lock);
                bond_send_gratuitous_arp(bond);
                read_unlock(&bond->curr_slave_lock);
        }

        if (bond_miimon_inspect(bond)) {
                read_unlock(&bond->lock);
                rtnl_lock();
                read_lock(&bond->lock);

                bond_miimon_commit(bond);

                read_unlock(&bond->lock);
                rtnl_unlock();  /* might sleep, hold no other locks */
                read_lock(&bond->lock);
        }

re_arm:
        if (bond->params.miimon)
                queue_delayed_work(bond->wq, &bond->mii_work,
                                   msecs_to_jiffies(bond->params.miimon));
out:
        read_unlock(&bond->lock);
}

static __be32 bond_glean_dev_ip(struct net_device *dev)
{
        struct in_device *idev;
        struct in_ifaddr *ifa;
        __be32 addr = 0;

        if (!dev)
                return 0;

        rcu_read_lock();
        idev = __in_dev_get_rcu(dev);
        if (!idev)
                goto out;

        ifa = idev->ifa_list;
        if (!ifa)
                goto out;

        addr = ifa->ifa_local;
out:
        rcu_read_unlock();
        return addr;
}

static int bond_has_this_ip(struct bonding *bond, __be32 ip)
{
        struct vlan_entry *vlan;

        if (ip == bond->master_ip)
                return 1;

        list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                if (ip == vlan->vlan_ip)
                        return 1;
        }

        return 0;
}

/*
 * We go to the (large) trouble of VLAN tagging ARP frames because
 * switches in VLAN mode (especially if ports are configured as
 * "native" to a VLAN) might not pass non-tagged frames.
 */
static void bond_arp_send(struct net_device *slave_dev, int arp_op, __be32 dest_ip, __be32 src_ip, unsigned short vlan_id)
{
        struct sk_buff *skb;

        dprintk("arp %d on slave %s: dst %x src %x vid %d\n", arp_op,
               slave_dev->name, dest_ip, src_ip, vlan_id);
               
        skb = arp_create(arp_op, ETH_P_ARP, dest_ip, slave_dev, src_ip,
                         NULL, slave_dev->dev_addr, NULL);

        if (!skb) {
                printk(KERN_ERR DRV_NAME ": ARP packet allocation failed\n");
                return;
        }
        if (vlan_id) {
                skb = vlan_put_tag(skb, vlan_id);
                if (!skb) {
                        printk(KERN_ERR DRV_NAME ": failed to insert VLAN tag\n");
                        return;
                }
        }
        arp_xmit(skb);
}


static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
{
        int i, vlan_id, rv;
        __be32 *targets = bond->params.arp_targets;
        struct vlan_entry *vlan;
        struct net_device *vlan_dev;
        struct flowi fl;
        struct rtable *rt;

        for (i = 0; (i < BOND_MAX_ARP_TARGETS); i++) {
                if (!targets[i])
                        continue;
                dprintk("basa: target %x\n", targets[i]);
                if (list_empty(&bond->vlan_list)) {
                        dprintk("basa: empty vlan: arp_send\n");
                        bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
                                      bond->master_ip, 0);
                        continue;
                }

                /*
                 * If VLANs are configured, we do a route lookup to
                 * determine which VLAN interface would be used, so we
                 * can tag the ARP with the proper VLAN tag.
                 */
                memset(&fl, 0, sizeof(fl));
                fl.fl4_dst = targets[i];
                fl.fl4_tos = RTO_ONLINK;

                rv = ip_route_output_key(&init_net, &rt, &fl);
                if (rv) {
                        if (net_ratelimit()) {
                                printk(KERN_WARNING DRV_NAME
                             ": %s: no route to arp_ip_target %u.%u.%u.%u\n",
                                       bond->dev->name, NIPQUAD(fl.fl4_dst));
                        }
                        continue;
                }

                /*
                 * This target is not on a VLAN
                 */
                if (rt->u.dst.dev == bond->dev) {
                        ip_rt_put(rt);
                        dprintk("basa: rtdev == bond->dev: arp_send\n");
                        bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
                                      bond->master_ip, 0);
                        continue;
                }

                vlan_id = 0;
                list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                        vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
                        if (vlan_dev == rt->u.dst.dev) {
                                vlan_id = vlan->vlan_id;
                                dprintk("basa: vlan match on %s %d\n",
                                       vlan_dev->name, vlan_id);
                                break;
                        }
                }

                if (vlan_id) {
                        ip_rt_put(rt);
                        bond_arp_send(slave->dev, ARPOP_REQUEST, targets[i],
                                      vlan->vlan_ip, vlan_id);
                        continue;
                }

                if (net_ratelimit()) {
                        printk(KERN_WARNING DRV_NAME
               ": %s: no path to arp_ip_target %u.%u.%u.%u via rt.dev %s\n",
                               bond->dev->name, NIPQUAD(fl.fl4_dst),
                               rt->u.dst.dev ? rt->u.dst.dev->name : "NULL");
                }
                ip_rt_put(rt);
        }
}

/*
 * Kick out a gratuitous ARP for an IP on the bonding master plus one
 * for each VLAN above us.
 *
 * Caller must hold curr_slave_lock for read or better
 */
static void bond_send_gratuitous_arp(struct bonding *bond)
{
        struct slave *slave = bond->curr_active_slave;
        struct vlan_entry *vlan;
        struct net_device *vlan_dev;

        dprintk("bond_send_grat_arp: bond %s slave %s\n", bond->dev->name,
                                slave ? slave->dev->name : "NULL");

        if (!slave || !bond->send_grat_arp ||
            test_bit(__LINK_STATE_LINKWATCH_PENDING, &slave->dev->state))
                return;

        bond->send_grat_arp--;

        if (bond->master_ip) {
                bond_arp_send(slave->dev, ARPOP_REPLY, bond->master_ip,
                                bond->master_ip, 0);
        }

        list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
                if (vlan->vlan_ip) {
                        bond_arp_send(slave->dev, ARPOP_REPLY, vlan->vlan_ip,
                                      vlan->vlan_ip, vlan->vlan_id);
                }
        }
}

static void bond_validate_arp(struct bonding *bond, struct slave *slave, __be32 sip, __be32 tip)
{
        int i;
        __be32 *targets = bond->params.arp_targets;

        targets = bond->params.arp_targets;
        for (i = 0; (i < BOND_MAX_ARP_TARGETS) && targets[i]; i++) {
                dprintk("bva: sip %u.%u.%u.%u tip %u.%u.%u.%u t[%d] "
                        "%u.%u.%u.%u bhti(tip) %d\n",
                       NIPQUAD(sip), NIPQUAD(tip), i, NIPQUAD(targets[i]),
                       bond_has_this_ip(bond, tip));
                if (sip == targets[i]) {
                        if (bond_has_this_ip(bond, tip))
                                slave->last_arp_rx = jiffies;
                        return;
                }
        }
}

static int bond_arp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt, struct net_device *orig_dev)
{
        struct arphdr *arp;
        struct slave *slave;
        struct bonding *bond;
        unsigned char *arp_ptr;
        __be32 sip, tip;

        if (dev_net(dev) != &init_net)
                goto out;

        if (!(dev->priv_flags & IFF_BONDING) || !(dev->flags & IFF_MASTER))
                goto out;

        bond = dev->priv;
        read_lock(&bond->lock);

        dprintk("bond_arp_rcv: bond %s skb->dev %s orig_dev %s\n",
                bond->dev->name, skb->dev ? skb->dev->name : "NULL",
                orig_dev ? orig_dev->name : "NULL");

        slave = bond_get_slave_by_dev(bond, orig_dev);
        if (!slave || !slave_do_arp_validate(bond, slave))
                goto out_unlock;

        if (!pskb_may_pull(skb, arp_hdr_len(dev)))
                goto out_unlock;

        arp = arp_hdr(skb);
        if (arp->ar_hln != dev->addr_len ||
            skb->pkt_type == PACKET_OTHERHOST ||
            skb->pkt_type == PACKET_LOOPBACK ||
            arp->ar_hrd != htons(ARPHRD_ETHER) ||
            arp->ar_pro != htons(ETH_P_IP) ||
            arp->ar_pln != 4)
                goto out_unlock;

        arp_ptr = (unsigned char *)(arp + 1);
        arp_ptr += dev->addr_len;
        memcpy(&sip, arp_ptr, 4);
        arp_ptr += 4 + dev->addr_len;
        memcpy(&tip, arp_ptr, 4);

        dprintk("bond_arp_rcv: %s %s/%d av %d sv %d sip %u.%u.%u.%u"
                " tip %u.%u.%u.%u\n", bond->dev->name, slave->dev->name,
                slave->state, bond->params.arp_validate,
                slave_do_arp_validate(bond, slave), NIPQUAD(sip), NIPQUAD(tip));

        /*
         * Backup slaves won't see the ARP reply, but do come through
         * here for each ARP probe (so we swap the sip/tip to validate
         * the probe).  In a "redundant switch, common router" type of
         * configuration, the ARP probe will (hopefully) travel from
         * the active, through one switch, the router, then the other
         * switch before reaching the backup.
         */
        if (slave->state == BOND_STATE_ACTIVE)
                bond_validate_arp(bond, slave, sip, tip);
        else
                bond_validate_arp(bond, slave, tip, sip);

out_unlock:
        read_unlock(&bond->lock);
out:
        dev_kfree_skb(skb);
        return NET_RX_SUCCESS;
}

/*
 * this function is called regularly to monitor each slave's link
 * ensuring that traffic is being sent and received when arp monitoring
 * is used in load-balancing mode. if the adapter has been dormant, then an
 * arp is transmitted to generate traffic. see activebackup_arp_monitor for
 * arp monitoring in active backup mode.
 */
void bond_loadbalance_arp_mon(struct work_struct *work)
{
        struct bonding *bond = container_of(work, struct bonding,
                                            arp_work.work);
        struct slave *slave, *oldcurrent;
        int do_failover = 0;
        int delta_in_ticks;
        int i;

        read_lock(&bond->lock);

        delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);

        if (bond->kill_timers) {
                goto out;
        }

        if (bond->slave_cnt == 0) {
                goto re_arm;
        }

        read_lock(&bond->curr_slave_lock);
        oldcurrent = bond->curr_active_slave;
        read_unlock(&bond->curr_slave_lock);

        /* see if any of the previous devices are up now (i.e. they have
         * xmt and rcv traffic). the curr_active_slave does not come into
         * the picture unless it is null. also, slave->jiffies is not needed
         * here because we send an arp on each slave and give a slave as
         * long as it needs to get the tx/rx within the delta.
         * TODO: what about up/down delay in arp mode? it wasn't here before
         *       so it can wait
         */
        bond_for_each_slave(bond, slave, i) {
                if (slave->link != BOND_LINK_UP) {
                        if (time_before_eq(jiffies, slave->dev->trans_start + delta_in_ticks) &&
                            time_before_eq(jiffies, slave->dev->last_rx + delta_in_ticks)) {

                                slave->link  = BOND_LINK_UP;
                                slave->state = BOND_STATE_ACTIVE;

                                /* primary_slave has no meaning in round-robin
                                 * mode. the window of a slave being up and
                                 * curr_active_slave being null after enslaving
                                 * is closed.
                                 */
                                if (!oldcurrent) {
                                        printk(KERN_INFO DRV_NAME
                                               ": %s: link status definitely "
                                               "up for interface %s, ",
                                               bond->dev->name,
                                               slave->dev->name);
                                        do_failover = 1;
                                } else {
                                        printk(KERN_INFO DRV_NAME
                                               ": %s: interface %s is now up\n",
                                               bond->dev->name,
                                               slave->dev->name);
                                }
                        }
                } else {
                        /* slave->link == BOND_LINK_UP */

                        /* not all switches will respond to an arp request
                         * when the source ip is 0, so don't take the link down
                         * if we don't know our ip yet
                         */
                        if (time_after_eq(jiffies, slave->dev->trans_start + 2*delta_in_ticks) ||
                            (time_after_eq(jiffies, slave->dev->last_rx + 2*delta_in_ticks))) {

                                slave->link  = BOND_LINK_DOWN;
                                slave->state = BOND_STATE_BACKUP;

                                if (slave->link_failure_count < UINT_MAX) {
                                        slave->link_failure_count++;
                                }

                                printk(KERN_INFO DRV_NAME
                                       ": %s: interface %s is now down.\n",
                                       bond->dev->name,
                                       slave->dev->name);

                                if (slave == oldcurrent) {
                                        do_failover = 1;
                                }
                        }
                }

                /* note: if switch is in round-robin mode, all links
                 * must tx arp to ensure all links rx an arp - otherwise
                 * links may oscillate or not come up at all; if switch is
                 * in something like xor mode, there is nothing we can
                 * do - all replies will be rx'ed on same link causing slaves
                 * to be unstable during low/no traffic periods
                 */
                if (IS_UP(slave->dev)) {
                        bond_arp_send_all(bond, slave);
                }
        }

        if (do_failover) {
                write_lock_bh(&bond->curr_slave_lock);

                bond_select_active_slave(bond);

                write_unlock_bh(&bond->curr_slave_lock);
        }

re_arm:
        if (bond->params.arp_interval)
                queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
out:
        read_unlock(&bond->lock);
}

/*
 * Called to inspect slaves for active-backup mode ARP monitor link state
 * changes.  Sets new_link in slaves to specify what action should take
 * place for the slave.  Returns 0 if no changes are found, >0 if changes
 * to link states must be committed.
 *
 * Called with bond->lock held for read.
 */
static int bond_ab_arp_inspect(struct bonding *bond, int delta_in_ticks)
{
        struct slave *slave;
        int i, commit = 0;

        bond_for_each_slave(bond, slave, i) {
                slave->new_link = BOND_LINK_NOCHANGE;

                if (slave->link != BOND_LINK_UP) {
                        if (time_before_eq(jiffies, slave_last_rx(bond, slave) +
                                           delta_in_ticks)) {
                                slave->new_link = BOND_LINK_UP;
                                commit++;
                        }

                        continue;
                }

                /*
                 * Give slaves 2*delta after being enslaved or made
                 * active.  This avoids bouncing, as the last receive
                 * times need a full ARP monitor cycle to be updated.
                 */
                if (!time_after_eq(jiffies, slave->jiffies +
                                   2 * delta_in_ticks))
                        continue;

                /*
                 * Backup slave is down if:
                 * - No current_arp_slave AND
                 * - more than 3*delta since last receive AND
                 * - the bond has an IP address
                 *
                 * Note: a non-null current_arp_slave indicates
                 * the curr_active_slave went down and we are
                 * searching for a new one; under this condition
                 * we only take the curr_active_slave down - this
                 * gives each slave a chance to tx/rx traffic
                 * before being taken out
                 */
                if (slave->state == BOND_STATE_BACKUP &&
                    !bond->current_arp_slave &&
                    time_after(jiffies, slave_last_rx(bond, slave) +
                               3 * delta_in_ticks)) {
                        slave->new_link = BOND_LINK_DOWN;
                        commit++;
                }

                /*
                 * Active slave is down if:
                 * - more than 2*delta since transmitting OR
                 * - (more than 2*delta since receive AND
                 *    the bond has an IP address)
                 */
                if ((slave->state == BOND_STATE_ACTIVE) &&
                    (time_after_eq(jiffies, slave->dev->trans_start +
                                    2 * delta_in_ticks) ||
                      (time_after_eq(jiffies, slave_last_rx(bond, slave)
                                     + 2 * delta_in_ticks)))) {
                        slave->new_link = BOND_LINK_DOWN;
                        commit++;
                }
        }

        read_lock(&bond->curr_slave_lock);

        /*
         * Trigger a commit if the primary option setting has changed.
         */
        if (bond->primary_slave &&
            (bond->primary_slave != bond->curr_active_slave) &&
            (bond->primary_slave->link == BOND_LINK_UP))
                commit++;

        read_unlock(&bond->curr_slave_lock);

        return commit;
}

/*
 * Called to commit link state changes noted by inspection step of
 * active-backup mode ARP monitor.
 *
 * Called with RTNL and bond->lock for read.
 */
static void bond_ab_arp_commit(struct bonding *bond, int delta_in_ticks)
{
        struct slave *slave;
        int i;

        bond_for_each_slave(bond, slave, i) {
                switch (slave->new_link) {
                case BOND_LINK_NOCHANGE:
                        continue;

                case BOND_LINK_UP:
                        write_lock_bh(&bond->curr_slave_lock);

                        if (!bond->curr_active_slave &&
                            time_before_eq(jiffies, slave->dev->trans_start +
                                           delta_in_ticks)) {
                                slave->link = BOND_LINK_UP;
                                bond_change_active_slave(bond, slave);
                                bond->current_arp_slave = NULL;

                                printk(KERN_INFO DRV_NAME
                                       ": %s: %s is up and now the "
                                       "active interface\n",
                                       bond->dev->name, slave->dev->name);

                        } else if (bond->curr_active_slave != slave) {
                                /* this slave has just come up but we
                                 * already have a current slave; this can
                                 * also happen if bond_enslave adds a new
                                 * slave that is up while we are searching
                                 * for a new slave
                                 */
                                slave->link = BOND_LINK_UP;
                                bond_set_slave_inactive_flags(slave);
                                bond->current_arp_slave = NULL;

                                printk(KERN_INFO DRV_NAME
                                       ": %s: backup interface %s is now up\n",
                                       bond->dev->name, slave->dev->name);
                        }

                        write_unlock_bh(&bond->curr_slave_lock);

                        break;

                case BOND_LINK_DOWN:
                        if (slave->link_failure_count < UINT_MAX)
                                slave->link_failure_count++;

                        slave->link = BOND_LINK_DOWN;

                        if (slave == bond->curr_active_slave) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: link status down for active "
                                       "interface %s, disabling it\n",
                                       bond->dev->name, slave->dev->name);

                                bond_set_slave_inactive_flags(slave);

                                write_lock_bh(&bond->curr_slave_lock);

                                bond_select_active_slave(bond);
                                if (bond->curr_active_slave)
                                        bond->curr_active_slave->jiffies =
                                                jiffies;

                                write_unlock_bh(&bond->curr_slave_lock);

                                bond->current_arp_slave = NULL;

                        } else if (slave->state == BOND_STATE_BACKUP) {
                                printk(KERN_INFO DRV_NAME
                                       ": %s: backup interface %s is now down\n",
                                       bond->dev->name, slave->dev->name);

                                bond_set_slave_inactive_flags(slave);
                        }
                        break;

                default:
                        printk(KERN_ERR DRV_NAME
                               ": %s: impossible: new_link %d on slave %s\n",
                               bond->dev->name, slave->new_link,
                               slave->dev->name);
                }
        }

        /*
         * No race with changes to primary via sysfs, as we hold rtnl.
         */
        if (bond->primary_slave &&
            (bond->primary_slave != bond->curr_active_slave) &&
            (bond->primary_slave->link == BOND_LINK_UP)) {
                write_lock_bh(&bond->curr_slave_lock);
                bond_change_active_slave(bond, bond->primary_slave);
                write_unlock_bh(&bond->curr_slave_lock);
        }

        bond_set_carrier(bond);
}

/*
 * Send ARP probes for active-backup mode ARP monitor.
 *
 * Called with bond->lock held for read.
 */
static void bond_ab_arp_probe(struct bonding *bond)
{
        struct slave *slave;
        int i;

        read_lock(&bond->curr_slave_lock);

        if (bond->current_arp_slave && bond->curr_active_slave)
                printk("PROBE: c_arp %s && cas %s BAD\n",
                       bond->current_arp_slave->dev->name,
                       bond->curr_active_slave->dev->name);

        if (bond->curr_active_slave) {
                bond_arp_send_all(bond, bond->curr_active_slave);
                read_unlock(&bond->curr_slave_lock);
                return;
        }

        read_unlock(&bond->curr_slave_lock);

        /* if we don't have a curr_active_slave, search for the next available
         * backup slave from the current_arp_slave and make it the candidate
         * for becoming the curr_active_slave
         */

        if (!bond->current_arp_slave) {
                bond->current_arp_slave = bond->first_slave;
                if (!bond->current_arp_slave)
                        return;
        }

        bond_set_slave_inactive_flags(bond->current_arp_slave);

        /* search for next candidate */
        bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) {
                if (IS_UP(slave->dev)) {
                        slave->link = BOND_LINK_BACK;
                        bond_set_slave_active_flags(slave);
                        bond_arp_send_all(bond, slave);
                        slave->jiffies = jiffies;
                        bond->current_arp_slave = slave;
                        break;
                }

                /* if the link state is up at this point, we
                 * mark it down - this can happen if we have
                 * simultaneous link failures and
                 * reselect_active_interface doesn't make this
                 * one the current slave so it is still marked
                 * up when it is actually down
                 */
                if (slave->link == BOND_LINK_UP) {
                        slave->link = BOND_LINK_DOWN;
                        if (slave->link_failure_count < UINT_MAX)
                                slave->link_failure_count++;

                        bond_set_slave_inactive_flags(slave);

                        printk(KERN_INFO DRV_NAME
                               ": %s: backup interface %s is now down.\n",
                               bond->dev->name, slave->dev->name);
                }
        }
}

void bond_activebackup_arp_mon(struct work_struct *work)
{
        struct bonding *bond = container_of(work, struct bonding,
                                            arp_work.work);
        int delta_in_ticks;

        read_lock(&bond->lock);

        if (bond->kill_timers)
                goto out;

        delta_in_ticks = msecs_to_jiffies(bond->params.arp_interval);

        if (bond->slave_cnt == 0)
                goto re_arm;

        if (bond->send_grat_arp) {
                read_lock(&bond->curr_slave_lock);
                bond_send_gratuitous_arp(bond);
                read_unlock(&bond->curr_slave_lock);
        }

        if (bond_ab_arp_inspect(bond, delta_in_ticks)) {
                read_unlock(&bond->lock);
                rtnl_lock();
                read_lock(&bond->lock);

                bond_ab_arp_commit(bond, delta_in_ticks);

                read_unlock(&bond->lock);
                rtnl_unlock();
                read_lock(&bond->lock);
        }

        bond_ab_arp_probe(bond);

re_arm:
        if (bond->params.arp_interval) {
                queue_delayed_work(bond->wq, &bond->arp_work, delta_in_ticks);
        }
out:
        read_unlock(&bond->lock);
}

/*------------------------------ proc/seq_file-------------------------------*/

#ifdef CONFIG_PROC_FS

static void *bond_info_seq_start(struct seq_file *seq, loff_t *pos)
{
        struct bonding *bond = seq->private;
        loff_t off = 0;
        struct slave *slave;
        int i;

        /* make sure the bond won't be taken away */
        read_lock(&dev_base_lock);
        read_lock(&bond->lock);

        if (*pos == 0) {
                return SEQ_START_TOKEN;
        }

        bond_for_each_slave(bond, slave, i) {
                if (++off == *pos) {
                        return slave;
                }
        }

        return NULL;
}

static void *bond_info_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
        struct bonding *bond = seq->private;
        struct slave *slave = v;

        ++*pos;
        if (v == SEQ_START_TOKEN) {
                return bond->first_slave;
        }

        slave = slave->next;

        return (slave == bond->first_slave) ? NULL : slave;
}

static void bond_info_seq_stop(struct seq_file *seq, void *v)
{
        struct bonding *bond = seq->private;

        read_unlock(&bond->lock);
        read_unlock(&dev_base_lock);
}

static void bond_info_show_master(struct seq_file *seq)
{
        struct bonding *bond = seq->private;
        struct slave *curr;
        int i;
        u32 target;

        read_lock(&bond->curr_slave_lock);
        curr = bond->curr_active_slave;
        read_unlock(&bond->curr_slave_lock);

        seq_printf(seq, "Bonding Mode: %s",
                   bond_mode_name(bond->params.mode));

        if (bond->params.mode == BOND_MODE_ACTIVEBACKUP &&
            bond->params.fail_over_mac)
                seq_printf(seq, " (fail_over_mac %s)",
                   fail_over_mac_tbl[bond->params.fail_over_mac].modename);

        seq_printf(seq, "\n");

        if (bond->params.mode == BOND_MODE_XOR ||
                bond->params.mode == BOND_MODE_8023AD) {
                seq_printf(seq, "Transmit Hash Policy: %s (%d)\n",
                        xmit_hashtype_tbl[bond->params.xmit_policy].modename,
                        bond->params.xmit_policy);
        }

        if (USES_PRIMARY(bond->params.mode)) {
                seq_printf(seq, "Primary Slave: %s\n",
                           (bond->primary_slave) ?
                           bond->primary_slave->dev->name : "None");

                seq_printf(seq, "Currently Active Slave: %s\n",
                           (curr) ? curr->dev->name : "None");
        }

        seq_printf(seq, "MII Status: %s\n", netif_carrier_ok(bond->dev) ?
                   "up" : "down");
        seq_printf(seq, "MII Polling Interval (ms): %d\n", bond->params.miimon);
        seq_printf(seq, "Up Delay (ms): %d\n",
                   bond->params.updelay * bond->params.miimon);
        seq_printf(seq, "Down Delay (ms): %d\n",
                   bond->params.downdelay * bond->params.miimon);


        /* ARP information */
        if(bond->params.arp_interval > 0) {
                int printed=0;
                seq_printf(seq, "ARP Polling Interval (ms): %d\n",
                                bond->params.arp_interval);

                seq_printf(seq, "ARP IP target/s (n.n.n.n form):");

                for(i = 0; (i < BOND_MAX_ARP_TARGETS) ;i++) {
                        if (!bond->params.arp_targets[i])
                                continue;
                        if (printed)
                                seq_printf(seq, ",");
                        target = ntohl(bond->params.arp_targets[i]);
                        seq_printf(seq, " %d.%d.%d.%d", HIPQUAD(target));
                        printed = 1;
                }
                seq_printf(seq, "\n");
        }

        if (bond->params.mode == BOND_MODE_8023AD) {
                struct ad_info ad_info;

                seq_puts(seq, "\n802.3ad info\n");
                seq_printf(seq, "LACP rate: %s\n",
                           (bond->params.lacp_fast) ? "fast" : "slow");

                if (bond_3ad_get_active_agg_info(bond, &ad_info)) {
                        seq_printf(seq, "bond %s has no active aggregator\n",
                                   bond->dev->name);
                } else {
                        seq_printf(seq, "Active Aggregator Info:\n");

                        seq_printf(seq, "\tAggregator ID: %d\n",
                                   ad_info.aggregator_id);
                        seq_printf(seq, "\tNumber of ports: %d\n",
                                   ad_info.ports);
                        seq_printf(seq, "\tActor Key: %d\n",
                                   ad_info.actor_key);
                        seq_printf(seq, "\tPartner Key: %d\n",
                                   ad_info.partner_key);
                        seq_printf(seq, "\tPartner Mac Address: %pM\n",
                                   ad_info.partner_system);
                }
        }
}

static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave)
{
        struct bonding *bond = seq->private;

        seq_printf(seq, "\nSlave Interface: %s\n", slave->dev->name);
        seq_printf(seq, "MII Status: %s\n",
                   (slave->link == BOND_LINK_UP) ?  "up" : "down");
        seq_printf(seq, "Link Failure Count: %u\n",
                   slave->link_failure_count);

        seq_printf(seq, "Permanent HW addr: %pM\n", slave->perm_hwaddr);

        if (bond->params.mode == BOND_MODE_8023AD) {
                const struct aggregator *agg
                        = SLAVE_AD_INFO(slave).port.aggregator;

                if (agg) {
                        seq_printf(seq, "Aggregator ID: %d\n",
                                   agg->aggregator_identifier);
                } else {
                        seq_puts(seq, "Aggregator ID: N/A\n");
                }
        }
}

static int bond_info_seq_show(struct seq_file *seq, void *v)
{
        if (v == SEQ_START_TOKEN) {
                seq_printf(seq, "%s\n", version);
                bond_info_show_master(seq);
        } else {
                bond_info_show_slave(seq, v);
        }

        return 0;
}

static struct seq_operations bond_info_seq_ops = {
        .start = bond_info_seq_start,
        .next  = bond_info_seq_next,
        .stop  = bond_info_seq_stop,
        .show  = bond_info_seq_show,
};

static int bond_info_open(struct inode *inode, struct file *file)
{
        struct seq_file *seq;
        struct proc_dir_entry *proc;
        int res;

        res = seq_open(file, &bond_info_seq_ops);
        if (!res) {
                /* recover the pointer buried in proc_dir_entry data */
                seq = file->private_data;
                proc = PDE(inode);
                seq->private = proc->data;
        }

        return res;
}

static const struct file_operations bond_info_fops = {
        .owner   = THIS_MODULE,
        .open    = bond_info_open,
        .read    = seq_read,
        .llseek  = seq_lseek,
        .release = seq_release,
};

static int bond_create_proc_entry(struct bonding *bond)
{
        struct net_device *bond_dev = bond->dev;

        if (bond_proc_dir) {
                bond->proc_entry = proc_create_data(bond_dev->name,
                                                    S_IRUGO, bond_proc_dir,
                                                    &bond_info_fops, bond);
                if (bond->proc_entry == NULL) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: Cannot create /proc/net/%s/%s\n",
                               DRV_NAME, bond_dev->name);
                } else {
                        memcpy(bond->proc_file_name, bond_dev->name, IFNAMSIZ);
                }
        }

        return 0;
}

static void bond_remove_proc_entry(struct bonding *bond)
{
        if (bond_proc_dir && bond->proc_entry) {
                remove_proc_entry(bond->proc_file_name, bond_proc_dir);
                memset(bond->proc_file_name, 0, IFNAMSIZ);
                bond->proc_entry = NULL;
        }
}

/* Create the bonding directory under /proc/net, if doesn't exist yet.
 * Caller must hold rtnl_lock.
 */
static void bond_create_proc_dir(void)
{
        int len = strlen(DRV_NAME);

        for (bond_proc_dir = init_net.proc_net->subdir; bond_proc_dir;
             bond_proc_dir = bond_proc_dir->next) {
                if ((bond_proc_dir->namelen == len) &&
                    !memcmp(bond_proc_dir->name, DRV_NAME, len)) {
                        break;
                }
        }

        if (!bond_proc_dir) {
                bond_proc_dir = proc_mkdir(DRV_NAME, init_net.proc_net);
                if (bond_proc_dir) {
                        bond_proc_dir->owner = THIS_MODULE;
                } else {
                        printk(KERN_WARNING DRV_NAME
                                ": Warning: cannot create /proc/net/%s\n",
                                DRV_NAME);
                }
        }
}

/* Destroy the bonding directory under /proc/net, if empty.
 * Caller must hold rtnl_lock.
 */
static void bond_destroy_proc_dir(void)
{
        struct proc_dir_entry *de;

        if (!bond_proc_dir) {
                return;
        }

        /* verify that the /proc dir is empty */
        for (de = bond_proc_dir->subdir; de; de = de->next) {
                /* ignore . and .. */
                if (*(de->name) != '.') {
                        break;
                }
        }

        if (de) {
                if (bond_proc_dir->owner == THIS_MODULE) {
                        bond_proc_dir->owner = NULL;
                }
        } else {
                remove_proc_entry(DRV_NAME, init_net.proc_net);
                bond_proc_dir = NULL;
        }
}
#endif /* CONFIG_PROC_FS */

/*-------------------------- netdev event handling --------------------------*/

/*
 * Change device name
 */
static int bond_event_changename(struct bonding *bond)
{
#ifdef CONFIG_PROC_FS
        bond_remove_proc_entry(bond);
        bond_create_proc_entry(bond);
#endif
        down_write(&(bonding_rwsem));
        bond_destroy_sysfs_entry(bond);
        bond_create_sysfs_entry(bond);
        up_write(&(bonding_rwsem));
        return NOTIFY_DONE;
}

static int bond_master_netdev_event(unsigned long event, struct net_device *bond_dev)
{
        struct bonding *event_bond = bond_dev->priv;

        switch (event) {
        case NETDEV_CHANGENAME:
                return bond_event_changename(event_bond);
        case NETDEV_UNREGISTER:
                bond_release_all(event_bond->dev);
                break;
        default:
                break;
        }

        return NOTIFY_DONE;
}

static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
{
        struct net_device *bond_dev = slave_dev->master;
        struct bonding *bond = bond_dev->priv;

        switch (event) {
        case NETDEV_UNREGISTER:
                if (bond_dev) {
                        if (bond->setup_by_slave)
                                bond_release_and_destroy(bond_dev, slave_dev);
                        else
                                bond_release(bond_dev, slave_dev);
                }
                break;
        case NETDEV_CHANGE:
                /*
                 * TODO: is this what we get if somebody
                 * sets up a hierarchical bond, then rmmod's
                 * one of the slave bonding devices?
                 */
                break;
        case NETDEV_DOWN:
                /*
                 * ... Or is it this?
                 */
                break;
        case NETDEV_CHANGEMTU:
                /*
                 * TODO: Should slaves be allowed to
                 * independently alter their MTU?  For
                 * an active-backup bond, slaves need
                 * not be the same type of device, so
                 * MTUs may vary.  For other modes,
                 * slaves arguably should have the
                 * same MTUs. To do this, we'd need to
                 * take over the slave's change_mtu
                 * function for the duration of their
                 * servitude.
                 */
                break;
        case NETDEV_CHANGENAME:
                /*
                 * TODO: handle changing the primary's name
                 */
                break;
        case NETDEV_FEAT_CHANGE:
                bond_compute_features(bond);
                break;
        default:
                break;
        }

        return NOTIFY_DONE;
}

/*
 * bond_netdev_event: handle netdev notifier chain events.
 *
 * This function receives events for the netdev chain.  The caller (an
 * ioctl handler calling blocking_notifier_call_chain) holds the necessary
 * locks for us to safely manipulate the slave devices (RTNL lock,
 * dev_probe_lock).
 */
static int bond_netdev_event(struct notifier_block *this, unsigned long event, void *ptr)
{
        struct net_device *event_dev = (struct net_device *)ptr;

        if (dev_net(event_dev) != &init_net)
                return NOTIFY_DONE;

        dprintk("event_dev: %s, event: %lx\n",
                (event_dev ? event_dev->name : "None"),
                event);

        if (!(event_dev->priv_flags & IFF_BONDING))
                return NOTIFY_DONE;

        if (event_dev->flags & IFF_MASTER) {
                dprintk("IFF_MASTER\n");
                return bond_master_netdev_event(event, event_dev);
        }

        if (event_dev->flags & IFF_SLAVE) {
                dprintk("IFF_SLAVE\n");
                return bond_slave_netdev_event(event, event_dev);
        }

        return NOTIFY_DONE;
}

/*
 * bond_inetaddr_event: handle inetaddr notifier chain events.
 *
 * We keep track of device IPs primarily to use as source addresses in
 * ARP monitor probes (rather than spewing out broadcasts all the time).
 *
 * We track one IP for the main device (if it has one), plus one per VLAN.
 */
static int bond_inetaddr_event(struct notifier_block *this, unsigned long event, void *ptr)
{
        struct in_ifaddr *ifa = ptr;
        struct net_device *vlan_dev, *event_dev = ifa->ifa_dev->dev;
        struct bonding *bond;
        struct vlan_entry *vlan;

        if (dev_net(ifa->ifa_dev->dev) != &init_net)
                return NOTIFY_DONE;

        list_for_each_entry(bond, &bond_dev_list, bond_list) {
                if (bond->dev == event_dev) {
                        switch (event) {
                        case NETDEV_UP:
                                bond->master_ip = ifa->ifa_local;
                                return NOTIFY_OK;
                        case NETDEV_DOWN:
                                bond->master_ip = bond_glean_dev_ip(bond->dev);
                                return NOTIFY_OK;
                        default:
                                return NOTIFY_DONE;
                        }
                }

                list_for_each_entry(vlan, &bond->vlan_list, vlan_list) {
                        vlan_dev = vlan_group_get_device(bond->vlgrp, vlan->vlan_id);
                        if (vlan_dev == event_dev) {
                                switch (event) {
                                case NETDEV_UP:
                                        vlan->vlan_ip = ifa->ifa_local;
                                        return NOTIFY_OK;
                                case NETDEV_DOWN:
                                        vlan->vlan_ip =
                                                bond_glean_dev_ip(vlan_dev);
                                        return NOTIFY_OK;
                                default:
                                        return NOTIFY_DONE;
                                }
                        }
                }
        }
        return NOTIFY_DONE;
}

static struct notifier_block bond_netdev_notifier = {
        .notifier_call = bond_netdev_event,
};

static struct notifier_block bond_inetaddr_notifier = {
        .notifier_call = bond_inetaddr_event,
};

/*-------------------------- Packet type handling ---------------------------*/

/* register to receive lacpdus on a bond */
static void bond_register_lacpdu(struct bonding *bond)
{
        struct packet_type *pk_type = &(BOND_AD_INFO(bond).ad_pkt_type);

        /* initialize packet type */
        pk_type->type = PKT_TYPE_LACPDU;
        pk_type->dev = bond->dev;
        pk_type->func = bond_3ad_lacpdu_recv;

        dev_add_pack(pk_type);
}

/* unregister to receive lacpdus on a bond */
static void bond_unregister_lacpdu(struct bonding *bond)
{
        dev_remove_pack(&(BOND_AD_INFO(bond).ad_pkt_type));
}

void bond_register_arp(struct bonding *bond)
{
        struct packet_type *pt = &bond->arp_mon_pt;

        if (pt->type)
                return;

        pt->type = htons(ETH_P_ARP);
        pt->dev = bond->dev;
        pt->func = bond_arp_rcv;
        dev_add_pack(pt);
}

void bond_unregister_arp(struct bonding *bond)
{
        struct packet_type *pt = &bond->arp_mon_pt;

        dev_remove_pack(pt);
        pt->type = 0;
}

/*---------------------------- Hashing Policies -----------------------------*/

/*
 * Hash for the output device based upon layer 2 and layer 3 data. If
 * the packet is not IP mimic bond_xmit_hash_policy_l2()
 */
static int bond_xmit_hash_policy_l23(struct sk_buff *skb,
                                     struct net_device *bond_dev, int count)
{
        struct ethhdr *data = (struct ethhdr *)skb->data;
        struct iphdr *iph = ip_hdr(skb);

        if (skb->protocol == htons(ETH_P_IP)) {
                return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
                        (data->h_dest[5] ^ bond_dev->dev_addr[5])) % count;
        }

        return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
}

/*
 * Hash for the output device based upon layer 3 and layer 4 data. If
 * the packet is a frag or not TCP or UDP, just use layer 3 data.  If it is
 * altogether not IP, mimic bond_xmit_hash_policy_l2()
 */
static int bond_xmit_hash_policy_l34(struct sk_buff *skb,
                                    struct net_device *bond_dev, int count)
{
        struct ethhdr *data = (struct ethhdr *)skb->data;
        struct iphdr *iph = ip_hdr(skb);
        __be16 *layer4hdr = (__be16 *)((u32 *)iph + iph->ihl);
        int layer4_xor = 0;

        if (skb->protocol == htons(ETH_P_IP)) {
                if (!(iph->frag_off & htons(IP_MF|IP_OFFSET)) &&
                    (iph->protocol == IPPROTO_TCP ||
                     iph->protocol == IPPROTO_UDP)) {
                        layer4_xor = ntohs((*layer4hdr ^ *(layer4hdr + 1)));
                }
                return (layer4_xor ^
                        ((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;

        }

        return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
}

/*
 * Hash for the output device based upon layer 2 data
 */
static int bond_xmit_hash_policy_l2(struct sk_buff *skb,
                                   struct net_device *bond_dev, int count)
{
        struct ethhdr *data = (struct ethhdr *)skb->data;

        return (data->h_dest[5] ^ bond_dev->dev_addr[5]) % count;
}

/*-------------------------- Device entry points ----------------------------*/

static int bond_open(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;

        bond->kill_timers = 0;

        if ((bond->params.mode == BOND_MODE_TLB) ||
            (bond->params.mode == BOND_MODE_ALB)) {
                /* bond_alb_initialize must be called before the timer
                 * is started.
                 */
                if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) {
                        /* something went wrong - fail the open operation */
                        return -1;
                }

                INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor);
                queue_delayed_work(bond->wq, &bond->alb_work, 0);
        }

        if (bond->params.miimon) {  /* link check interval, in milliseconds. */
                INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor);
                queue_delayed_work(bond->wq, &bond->mii_work, 0);
        }

        if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
                if (bond->params.mode == BOND_MODE_ACTIVEBACKUP)
                        INIT_DELAYED_WORK(&bond->arp_work,
                                          bond_activebackup_arp_mon);
                else
                        INIT_DELAYED_WORK(&bond->arp_work,
                                          bond_loadbalance_arp_mon);

                queue_delayed_work(bond->wq, &bond->arp_work, 0);
                if (bond->params.arp_validate)
                        bond_register_arp(bond);
        }

        if (bond->params.mode == BOND_MODE_8023AD) {
                INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler);
                queue_delayed_work(bond->wq, &bond->ad_work, 0);
                /* register to receive LACPDUs */
                bond_register_lacpdu(bond);
        }

        return 0;
}

static int bond_close(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;

        if (bond->params.mode == BOND_MODE_8023AD) {
                /* Unregister the receive of LACPDUs */
                bond_unregister_lacpdu(bond);
        }

        if (bond->params.arp_validate)
                bond_unregister_arp(bond);

        write_lock_bh(&bond->lock);

        bond->send_grat_arp = 0;

        /* signal timers not to re-arm */
        bond->kill_timers = 1;

        write_unlock_bh(&bond->lock);

        if (bond->params.miimon) {  /* link check interval, in milliseconds. */
                cancel_delayed_work(&bond->mii_work);
        }

        if (bond->params.arp_interval) {  /* arp interval, in milliseconds. */
                cancel_delayed_work(&bond->arp_work);
        }

        switch (bond->params.mode) {
        case BOND_MODE_8023AD:
                cancel_delayed_work(&bond->ad_work);
                break;
        case BOND_MODE_TLB:
        case BOND_MODE_ALB:
                cancel_delayed_work(&bond->alb_work);
                break;
        default:
                break;
        }


        if ((bond->params.mode == BOND_MODE_TLB) ||
            (bond->params.mode == BOND_MODE_ALB)) {
                /* Must be called only after all
                 * slaves have been released
                 */
                bond_alb_deinitialize(bond);
        }

        return 0;
}

static struct net_device_stats *bond_get_stats(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct net_device_stats *stats = &(bond->stats), *sstats;
        struct net_device_stats local_stats;
        struct slave *slave;
        int i;

        memset(&local_stats, 0, sizeof(struct net_device_stats));

        read_lock_bh(&bond->lock);

        bond_for_each_slave(bond, slave, i) {
                sstats = slave->dev->get_stats(slave->dev);
                local_stats.rx_packets += sstats->rx_packets;
                local_stats.rx_bytes += sstats->rx_bytes;
                local_stats.rx_errors += sstats->rx_errors;
                local_stats.rx_dropped += sstats->rx_dropped;

                local_stats.tx_packets += sstats->tx_packets;
                local_stats.tx_bytes += sstats->tx_bytes;
                local_stats.tx_errors += sstats->tx_errors;
                local_stats.tx_dropped += sstats->tx_dropped;

                local_stats.multicast += sstats->multicast;
                local_stats.collisions += sstats->collisions;

                local_stats.rx_length_errors += sstats->rx_length_errors;
                local_stats.rx_over_errors += sstats->rx_over_errors;
                local_stats.rx_crc_errors += sstats->rx_crc_errors;
                local_stats.rx_frame_errors += sstats->rx_frame_errors;
                local_stats.rx_fifo_errors += sstats->rx_fifo_errors;
                local_stats.rx_missed_errors += sstats->rx_missed_errors;

                local_stats.tx_aborted_errors += sstats->tx_aborted_errors;
                local_stats.tx_carrier_errors += sstats->tx_carrier_errors;
                local_stats.tx_fifo_errors += sstats->tx_fifo_errors;
                local_stats.tx_heartbeat_errors += sstats->tx_heartbeat_errors;
                local_stats.tx_window_errors += sstats->tx_window_errors;
        }

        memcpy(stats, &local_stats, sizeof(struct net_device_stats));

        read_unlock_bh(&bond->lock);

        return stats;
}

static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd)
{
        struct net_device *slave_dev = NULL;
        struct ifbond k_binfo;
        struct ifbond __user *u_binfo = NULL;
        struct ifslave k_sinfo;
        struct ifslave __user *u_sinfo = NULL;
        struct mii_ioctl_data *mii = NULL;
        int res = 0;

        dprintk("bond_ioctl: master=%s, cmd=%d\n",
                bond_dev->name, cmd);

        switch (cmd) {
        case SIOCGMIIPHY:
                mii = if_mii(ifr);
                if (!mii) {
                        return -EINVAL;
                }
                mii->phy_id = 0;
                /* Fall Through */
        case SIOCGMIIREG:
                /*
                 * We do this again just in case we were called by SIOCGMIIREG
                 * instead of SIOCGMIIPHY.
                 */
                mii = if_mii(ifr);
                if (!mii) {
                        return -EINVAL;
                }

                if (mii->reg_num == 1) {
                        struct bonding *bond = bond_dev->priv;
                        mii->val_out = 0;
                        read_lock(&bond->lock);
                        read_lock(&bond->curr_slave_lock);
                        if (netif_carrier_ok(bond->dev)) {
                                mii->val_out = BMSR_LSTATUS;
                        }
                        read_unlock(&bond->curr_slave_lock);
                        read_unlock(&bond->lock);
                }

                return 0;
        case BOND_INFO_QUERY_OLD:
        case SIOCBONDINFOQUERY:
                u_binfo = (struct ifbond __user *)ifr->ifr_data;

                if (copy_from_user(&k_binfo, u_binfo, sizeof(ifbond))) {
                        return -EFAULT;
                }

                res = bond_info_query(bond_dev, &k_binfo);
                if (res == 0) {
                        if (copy_to_user(u_binfo, &k_binfo, sizeof(ifbond))) {
                                return -EFAULT;
                        }
                }

                return res;
        case BOND_SLAVE_INFO_QUERY_OLD:
        case SIOCBONDSLAVEINFOQUERY:
                u_sinfo = (struct ifslave __user *)ifr->ifr_data;

                if (copy_from_user(&k_sinfo, u_sinfo, sizeof(ifslave))) {
                        return -EFAULT;
                }

                res = bond_slave_info_query(bond_dev, &k_sinfo);
                if (res == 0) {
                        if (copy_to_user(u_sinfo, &k_sinfo, sizeof(ifslave))) {
                                return -EFAULT;
                        }
                }

                return res;
        default:
                /* Go on */
                break;
        }

        if (!capable(CAP_NET_ADMIN)) {
                return -EPERM;
        }

        down_write(&(bonding_rwsem));
        slave_dev = dev_get_by_name(&init_net, ifr->ifr_slave);

        dprintk("slave_dev=%p: \n", slave_dev);

        if (!slave_dev) {
                res = -ENODEV;
        } else {
                dprintk("slave_dev->name=%s: \n", slave_dev->name);
                switch (cmd) {
                case BOND_ENSLAVE_OLD:
                case SIOCBONDENSLAVE:
                        res = bond_enslave(bond_dev, slave_dev);
                        break;
                case BOND_RELEASE_OLD:
                case SIOCBONDRELEASE:
                        res = bond_release(bond_dev, slave_dev);
                        break;
                case BOND_SETHWADDR_OLD:
                case SIOCBONDSETHWADDR:
                        res = bond_sethwaddr(bond_dev, slave_dev);
                        break;
                case BOND_CHANGE_ACTIVE_OLD:
                case SIOCBONDCHANGEACTIVE:
                        res = bond_ioctl_change_active(bond_dev, slave_dev);
                        break;
                default:
                        res = -EOPNOTSUPP;
                }

                dev_put(slave_dev);
        }

        up_write(&(bonding_rwsem));
        return res;
}

static void bond_set_multicast_list(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct dev_mc_list *dmi;

        /*
         * Do promisc before checking multicast_mode
         */
        if ((bond_dev->flags & IFF_PROMISC) && !(bond->flags & IFF_PROMISC)) {
                /*
                 * FIXME: Need to handle the error when one of the multi-slaves
                 * encounters error.
                 */
                bond_set_promiscuity(bond, 1);
        }

        if (!(bond_dev->flags & IFF_PROMISC) && (bond->flags & IFF_PROMISC)) {
                bond_set_promiscuity(bond, -1);
        }

        /* set allmulti flag to slaves */
        if ((bond_dev->flags & IFF_ALLMULTI) && !(bond->flags & IFF_ALLMULTI)) {
                /*
                 * FIXME: Need to handle the error when one of the multi-slaves
                 * encounters error.
                 */
                bond_set_allmulti(bond, 1);
        }

        if (!(bond_dev->flags & IFF_ALLMULTI) && (bond->flags & IFF_ALLMULTI)) {
                bond_set_allmulti(bond, -1);
        }

        read_lock(&bond->lock);

        bond->flags = bond_dev->flags;

        /* looking for addresses to add to slaves' mc list */
        for (dmi = bond_dev->mc_list; dmi; dmi = dmi->next) {
                if (!bond_mc_list_find_dmi(dmi, bond->mc_list)) {
                        bond_mc_add(bond, dmi->dmi_addr, dmi->dmi_addrlen);
                }
        }

        /* looking for addresses to delete from slaves' list */
        for (dmi = bond->mc_list; dmi; dmi = dmi->next) {
                if (!bond_mc_list_find_dmi(dmi, bond_dev->mc_list)) {
                        bond_mc_delete(bond, dmi->dmi_addr, dmi->dmi_addrlen);
                }
        }

        /* save master's multicast list */
        bond_mc_list_destroy(bond);
        bond_mc_list_copy(bond_dev->mc_list, bond, GFP_ATOMIC);

        read_unlock(&bond->lock);
}

/*
 * Change the MTU of all of a master's slaves to match the master
 */
static int bond_change_mtu(struct net_device *bond_dev, int new_mtu)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave, *stop_at;
        int res = 0;
        int i;

        dprintk("bond=%p, name=%s, new_mtu=%d\n", bond,
                (bond_dev ? bond_dev->name : "None"), new_mtu);

        /* Can't hold bond->lock with bh disabled here since
         * some base drivers panic. On the other hand we can't
         * hold bond->lock without bh disabled because we'll
         * deadlock. The only solution is to rely on the fact
         * that we're under rtnl_lock here, and the slaves
         * list won't change. This doesn't solve the problem
         * of setting the slave's MTU while it is
         * transmitting, but the assumption is that the base
         * driver can handle that.
         *
         * TODO: figure out a way to safely iterate the slaves
         * list, but without holding a lock around the actual
         * call to the base driver.
         */

        bond_for_each_slave(bond, slave, i) {
                dprintk("s %p s->p %p c_m %p\n", slave,
                        slave->prev, slave->dev->change_mtu);

                res = dev_set_mtu(slave->dev, new_mtu);

                if (res) {
                        /* If we failed to set the slave's mtu to the new value
                         * we must abort the operation even in ACTIVE_BACKUP
                         * mode, because if we allow the backup slaves to have
                         * different mtu values than the active slave we'll
                         * need to change their mtu when doing a failover. That
                         * means changing their mtu from timer context, which
                         * is probably not a good idea.
                         */
                        dprintk("err %d %s\n", res, slave->dev->name);
                        goto unwind;
                }
        }

        bond_dev->mtu = new_mtu;

        return 0;

unwind:
        /* unwind from head to the slave that failed */
        stop_at = slave;
        bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
                int tmp_res;

                tmp_res = dev_set_mtu(slave->dev, bond_dev->mtu);
                if (tmp_res) {
                        dprintk("unwind err %d dev %s\n", tmp_res,
                                slave->dev->name);
                }
        }

        return res;
}

/*
 * Change HW address
 *
 * Note that many devices must be down to change the HW address, and
 * downing the master releases all slaves.  We can make bonds full of
 * bonding devices to test this, however.
 */
static int bond_set_mac_address(struct net_device *bond_dev, void *addr)
{
        struct bonding *bond = bond_dev->priv;
        struct sockaddr *sa = addr, tmp_sa;
        struct slave *slave, *stop_at;
        int res = 0;
        int i;

        dprintk("bond=%p, name=%s\n", bond, (bond_dev ? bond_dev->name : "None"));

        /*
         * If fail_over_mac is set to active, do nothing and return
         * success.  Returning an error causes ifenslave to fail.
         */
        if (bond->params.fail_over_mac == BOND_FOM_ACTIVE)
                return 0;

        if (!is_valid_ether_addr(sa->sa_data)) {
                return -EADDRNOTAVAIL;
        }

        /* Can't hold bond->lock with bh disabled here since
         * some base drivers panic. On the other hand we can't
         * hold bond->lock without bh disabled because we'll
         * deadlock. The only solution is to rely on the fact
         * that we're under rtnl_lock here, and the slaves
         * list won't change. This doesn't solve the problem
         * of setting the slave's hw address while it is
         * transmitting, but the assumption is that the base
         * driver can handle that.
         *
         * TODO: figure out a way to safely iterate the slaves
         * list, but without holding a lock around the actual
         * call to the base driver.
         */

        bond_for_each_slave(bond, slave, i) {
                dprintk("slave %p %s\n", slave, slave->dev->name);

                if (slave->dev->set_mac_address == NULL) {
                        res = -EOPNOTSUPP;
                        dprintk("EOPNOTSUPP %s\n", slave->dev->name);
                        goto unwind;
                }

                res = dev_set_mac_address(slave->dev, addr);
                if (res) {
                        /* TODO: consider downing the slave
                         * and retry ?
                         * User should expect communications
                         * breakage anyway until ARP finish
                         * updating, so...
                         */
                        dprintk("err %d %s\n", res, slave->dev->name);
                        goto unwind;
                }
        }

        /* success */
        memcpy(bond_dev->dev_addr, sa->sa_data, bond_dev->addr_len);
        return 0;

unwind:
        memcpy(tmp_sa.sa_data, bond_dev->dev_addr, bond_dev->addr_len);
        tmp_sa.sa_family = bond_dev->type;

        /* unwind from head to the slave that failed */
        stop_at = slave;
        bond_for_each_slave_from_to(bond, slave, i, bond->first_slave, stop_at) {
                int tmp_res;

                tmp_res = dev_set_mac_address(slave->dev, &tmp_sa);
                if (tmp_res) {
                        dprintk("unwind err %d dev %s\n", tmp_res,
                                slave->dev->name);
                }
        }

        return res;
}

static int bond_xmit_roundrobin(struct sk_buff *skb, struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave, *start_at;
        int i, slave_no, res = 1;

        read_lock(&bond->lock);

        if (!BOND_IS_OK(bond)) {
                goto out;
        }

        /*
         * Concurrent TX may collide on rr_tx_counter; we accept that
         * as being rare enough not to justify using an atomic op here
         */
        slave_no = bond->rr_tx_counter++ % bond->slave_cnt;

        bond_for_each_slave(bond, slave, i) {
                slave_no--;
                if (slave_no < 0) {
                        break;
                }
        }

        start_at = slave;
        bond_for_each_slave_from(bond, slave, i, start_at) {
                if (IS_UP(slave->dev) &&
                    (slave->link == BOND_LINK_UP) &&
                    (slave->state == BOND_STATE_ACTIVE)) {
                        res = bond_dev_queue_xmit(bond, skb, slave->dev);
                        break;
                }
        }

out:
        if (res) {
                /* no suitable interface, frame not sent */
                dev_kfree_skb(skb);
        }
        read_unlock(&bond->lock);
        return 0;
}


/*
 * in active-backup mode, we know that bond->curr_active_slave is always valid if
 * the bond has a usable interface.
 */
static int bond_xmit_activebackup(struct sk_buff *skb, struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        int res = 1;

        read_lock(&bond->lock);
        read_lock(&bond->curr_slave_lock);

        if (!BOND_IS_OK(bond)) {
                goto out;
        }

        if (!bond->curr_active_slave)
                goto out;

        res = bond_dev_queue_xmit(bond, skb, bond->curr_active_slave->dev);

out:
        if (res) {
                /* no suitable interface, frame not sent */
                dev_kfree_skb(skb);
        }
        read_unlock(&bond->curr_slave_lock);
        read_unlock(&bond->lock);
        return 0;
}

/*
 * In bond_xmit_xor() , we determine the output device by using a pre-
 * determined xmit_hash_policy(), If the selected device is not enabled,
 * find the next active slave.
 */
static int bond_xmit_xor(struct sk_buff *skb, struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave, *start_at;
        int slave_no;
        int i;
        int res = 1;

        read_lock(&bond->lock);

        if (!BOND_IS_OK(bond)) {
                goto out;
        }

        slave_no = bond->xmit_hash_policy(skb, bond_dev, bond->slave_cnt);

        bond_for_each_slave(bond, slave, i) {
                slave_no--;
                if (slave_no < 0) {
                        break;
                }
        }

        start_at = slave;

        bond_for_each_slave_from(bond, slave, i, start_at) {
                if (IS_UP(slave->dev) &&
                    (slave->link == BOND_LINK_UP) &&
                    (slave->state == BOND_STATE_ACTIVE)) {
                        res = bond_dev_queue_xmit(bond, skb, slave->dev);
                        break;
                }
        }

out:
        if (res) {
                /* no suitable interface, frame not sent */
                dev_kfree_skb(skb);
        }
        read_unlock(&bond->lock);
        return 0;
}

/*
 * in broadcast mode, we send everything to all usable interfaces.
 */
static int bond_xmit_broadcast(struct sk_buff *skb, struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;
        struct slave *slave, *start_at;
        struct net_device *tx_dev = NULL;
        int i;
        int res = 1;

        read_lock(&bond->lock);

        if (!BOND_IS_OK(bond)) {
                goto out;
        }

        read_lock(&bond->curr_slave_lock);
        start_at = bond->curr_active_slave;
        read_unlock(&bond->curr_slave_lock);

        if (!start_at) {
                goto out;
        }

        bond_for_each_slave_from(bond, slave, i, start_at) {
                if (IS_UP(slave->dev) &&
                    (slave->link == BOND_LINK_UP) &&
                    (slave->state == BOND_STATE_ACTIVE)) {
                        if (tx_dev) {
                                struct sk_buff *skb2 = skb_clone(skb, GFP_ATOMIC);
                                if (!skb2) {
                                        printk(KERN_ERR DRV_NAME
                                               ": %s: Error: bond_xmit_broadcast(): "
                                               "skb_clone() failed\n",
                                               bond_dev->name);
                                        continue;
                                }

                                res = bond_dev_queue_xmit(bond, skb2, tx_dev);
                                if (res) {
                                        dev_kfree_skb(skb2);
                                        continue;
                                }
                        }
                        tx_dev = slave->dev;
                }
        }

        if (tx_dev) {
                res = bond_dev_queue_xmit(bond, skb, tx_dev);
        }

out:
        if (res) {
                /* no suitable interface, frame not sent */
                dev_kfree_skb(skb);
        }
        /* frame sent to all suitable interfaces */
        read_unlock(&bond->lock);
        return 0;
}

/*------------------------- Device initialization ---------------------------*/

static void bond_set_xmit_hash_policy(struct bonding *bond)
{
        switch (bond->params.xmit_policy) {
        case BOND_XMIT_POLICY_LAYER23:
                bond->xmit_hash_policy = bond_xmit_hash_policy_l23;
                break;
        case BOND_XMIT_POLICY_LAYER34:
                bond->xmit_hash_policy = bond_xmit_hash_policy_l34;
                break;
        case BOND_XMIT_POLICY_LAYER2:
        default:
                bond->xmit_hash_policy = bond_xmit_hash_policy_l2;
                break;
        }
}

/*
 * set bond mode specific net device operations
 */
void bond_set_mode_ops(struct bonding *bond, int mode)
{
        struct net_device *bond_dev = bond->dev;

        switch (mode) {
        case BOND_MODE_ROUNDROBIN:
                bond_dev->hard_start_xmit = bond_xmit_roundrobin;
                break;
        case BOND_MODE_ACTIVEBACKUP:
                bond_dev->hard_start_xmit = bond_xmit_activebackup;
                break;
        case BOND_MODE_XOR:
                bond_dev->hard_start_xmit = bond_xmit_xor;
                bond_set_xmit_hash_policy(bond);
                break;
        case BOND_MODE_BROADCAST:
                bond_dev->hard_start_xmit = bond_xmit_broadcast;
                break;
        case BOND_MODE_8023AD:
                bond_set_master_3ad_flags(bond);
                bond_dev->hard_start_xmit = bond_3ad_xmit_xor;
                bond_set_xmit_hash_policy(bond);
                break;
        case BOND_MODE_ALB:
                bond_set_master_alb_flags(bond);
                /* FALLTHRU */
        case BOND_MODE_TLB:
                bond_dev->hard_start_xmit = bond_alb_xmit;
                bond_dev->set_mac_address = bond_alb_set_mac_address;
                break;
        default:
                /* Should never happen, mode already checked */
                printk(KERN_ERR DRV_NAME
                       ": %s: Error: Unknown bonding mode %d\n",
                       bond_dev->name,
                       mode);
                break;
        }
}

static void bond_ethtool_get_drvinfo(struct net_device *bond_dev,
                                    struct ethtool_drvinfo *drvinfo)
{
        strncpy(drvinfo->driver, DRV_NAME, 32);
        strncpy(drvinfo->version, DRV_VERSION, 32);
        snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION);
}

static const struct ethtool_ops bond_ethtool_ops = {
        .get_drvinfo            = bond_ethtool_get_drvinfo,
        .get_link               = ethtool_op_get_link,
        .get_tx_csum            = ethtool_op_get_tx_csum,
        .get_sg                 = ethtool_op_get_sg,
        .get_tso                = ethtool_op_get_tso,
        .get_ufo                = ethtool_op_get_ufo,
        .get_flags              = ethtool_op_get_flags,
};

/*
 * Does not allocate but creates a /proc entry.
 * Allowed to fail.
 */
static int bond_init(struct net_device *bond_dev, struct bond_params *params)
{
        struct bonding *bond = bond_dev->priv;

        dprintk("Begin bond_init for %s\n", bond_dev->name);

        /* initialize rwlocks */
        rwlock_init(&bond->lock);
        rwlock_init(&bond->curr_slave_lock);

        bond->params = *params; /* copy params struct */

        bond->wq = create_singlethread_workqueue(bond_dev->name);
        if (!bond->wq)
                return -ENOMEM;

        /* Initialize pointers */
        bond->first_slave = NULL;
        bond->curr_active_slave = NULL;
        bond->current_arp_slave = NULL;
        bond->primary_slave = NULL;
        bond->dev = bond_dev;
        bond->send_grat_arp = 0;
        bond->setup_by_slave = 0;
        INIT_LIST_HEAD(&bond->vlan_list);

        /* Initialize the device entry points */
        bond_dev->open = bond_open;
        bond_dev->stop = bond_close;
        bond_dev->get_stats = bond_get_stats;
        bond_dev->do_ioctl = bond_do_ioctl;
        bond_dev->ethtool_ops = &bond_ethtool_ops;
        bond_dev->set_multicast_list = bond_set_multicast_list;
        bond_dev->change_mtu = bond_change_mtu;
        bond_dev->set_mac_address = bond_set_mac_address;
        bond_dev->validate_addr = NULL;

        bond_set_mode_ops(bond, bond->params.mode);

        bond_dev->destructor = free_netdev;

        /* Initialize the device options */
        bond_dev->tx_queue_len = 0;
        bond_dev->flags |= IFF_MASTER|IFF_MULTICAST;
        bond_dev->priv_flags |= IFF_BONDING;

        /* At first, we block adding VLANs. That's the only way to
         * prevent problems that occur when adding VLANs over an
         * empty bond. The block will be removed once non-challenged
         * slaves are enslaved.
         */
        bond_dev->features |= NETIF_F_VLAN_CHALLENGED;

        /* don't acquire bond device's netif_tx_lock when
         * transmitting */
        bond_dev->features |= NETIF_F_LLTX;

        /* By default, we declare the bond to be fully
         * VLAN hardware accelerated capable. Special
         * care is taken in the various xmit functions
         * when there are slaves that are not hw accel
         * capable
         */
        bond_dev->vlan_rx_register = bond_vlan_rx_register;
        bond_dev->vlan_rx_add_vid  = bond_vlan_rx_add_vid;
        bond_dev->vlan_rx_kill_vid = bond_vlan_rx_kill_vid;
        bond_dev->features |= (NETIF_F_HW_VLAN_TX |
                               NETIF_F_HW_VLAN_RX |
                               NETIF_F_HW_VLAN_FILTER);

#ifdef CONFIG_PROC_FS
        bond_create_proc_entry(bond);
#endif
        list_add_tail(&bond->bond_list, &bond_dev_list);

        return 0;
}

/* De-initialize device specific data.
 * Caller must hold rtnl_lock.
 */
static void bond_deinit(struct net_device *bond_dev)
{
        struct bonding *bond = bond_dev->priv;

        list_del(&bond->bond_list);

#ifdef CONFIG_PROC_FS
        bond_remove_proc_entry(bond);
#endif
}

static void bond_work_cancel_all(struct bonding *bond)
{
        write_lock_bh(&bond->lock);
        bond->kill_timers = 1;
        write_unlock_bh(&bond->lock);

        if (bond->params.miimon && delayed_work_pending(&bond->mii_work))
                cancel_delayed_work(&bond->mii_work);

        if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work))
                cancel_delayed_work(&bond->arp_work);

        if (bond->params.mode == BOND_MODE_ALB &&
            delayed_work_pending(&bond->alb_work))
                cancel_delayed_work(&bond->alb_work);

        if (bond->params.mode == BOND_MODE_8023AD &&
            delayed_work_pending(&bond->ad_work))
                cancel_delayed_work(&bond->ad_work);
}

/* Unregister and free all bond devices.
 * Caller must hold rtnl_lock.
 */
static void bond_free_all(void)
{
        struct bonding *bond, *nxt;

        list_for_each_entry_safe(bond, nxt, &bond_dev_list, bond_list) {
                struct net_device *bond_dev = bond->dev;

                bond_work_cancel_all(bond);
                netif_addr_lock_bh(bond_dev);
                bond_mc_list_destroy(bond);
                netif_addr_unlock_bh(bond_dev);
                /* Release the bonded slaves */
                bond_release_all(bond_dev);
                bond_destroy(bond);
        }

#ifdef CONFIG_PROC_FS
        bond_destroy_proc_dir();
#endif
}

/*------------------------- Module initialization ---------------------------*/

/*
 * Convert string input module parms.  Accept either the
 * number of the mode or its string name.  A bit complicated because
 * some mode names are substrings of other names, and calls from sysfs
 * may have whitespace in the name (trailing newlines, for example).
 */
int bond_parse_parm(const char *buf, struct bond_parm_tbl *tbl)
{
        int mode = -1, i, rv;
        char *p, modestr[BOND_MAX_MODENAME_LEN + 1] = { 0, };

        for (p = (char *)buf; *p; p++)
                if (!(isdigit(*p) || isspace(*p)))
                        break;

        if (*p)
                rv = sscanf(buf, "%20s", modestr);
        else
                rv = sscanf(buf, "%d", &mode);

        if (!rv)
                return -1;

        for (i = 0; tbl[i].modename; i++) {
                if (mode == tbl[i].mode)
                        return tbl[i].mode;
                if (strcmp(modestr, tbl[i].modename) == 0)
                        return tbl[i].mode;
        }

        return -1;
}

static int bond_check_params(struct bond_params *params)
{
        int arp_validate_value, fail_over_mac_value;

        /*
         * Convert string parameters.
         */
        if (mode) {
                bond_mode = bond_parse_parm(mode, bond_mode_tbl);
                if (bond_mode == -1) {
                        printk(KERN_ERR DRV_NAME
                               ": Error: Invalid bonding mode \"%s\"\n",
                               mode == NULL ? "NULL" : mode);
                        return -EINVAL;
                }
        }

        if (xmit_hash_policy) {
                if ((bond_mode != BOND_MODE_XOR) &&
                    (bond_mode != BOND_MODE_8023AD)) {
                        printk(KERN_INFO DRV_NAME
                               ": xor_mode param is irrelevant in mode %s\n",
                               bond_mode_name(bond_mode));
                } else {
                        xmit_hashtype = bond_parse_parm(xmit_hash_policy,
                                                        xmit_hashtype_tbl);
                        if (xmit_hashtype == -1) {
                                printk(KERN_ERR DRV_NAME
                                ": Error: Invalid xmit_hash_policy \"%s\"\n",
                                xmit_hash_policy == NULL ? "NULL" :
                                       xmit_hash_policy);
                                return -EINVAL;
                        }
                }
        }

        if (lacp_rate) {
                if (bond_mode != BOND_MODE_8023AD) {
                        printk(KERN_INFO DRV_NAME
                               ": lacp_rate param is irrelevant in mode %s\n",
                               bond_mode_name(bond_mode));
                } else {
                        lacp_fast = bond_parse_parm(lacp_rate, bond_lacp_tbl);
                        if (lacp_fast == -1) {
                                printk(KERN_ERR DRV_NAME
                                       ": Error: Invalid lacp rate \"%s\"\n",
                                       lacp_rate == NULL ? "NULL" : lacp_rate);
                                return -EINVAL;
                        }
                }
        }

        if (max_bonds < 0 || max_bonds > INT_MAX) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: max_bonds (%d) not in range %d-%d, so it "
                       "was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",
                       max_bonds, 0, INT_MAX, BOND_DEFAULT_MAX_BONDS);
                max_bonds = BOND_DEFAULT_MAX_BONDS;
        }

        if (miimon < 0) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: miimon module parameter (%d), "
                       "not in range 0-%d, so it was reset to %d\n",
                       miimon, INT_MAX, BOND_LINK_MON_INTERV);
                miimon = BOND_LINK_MON_INTERV;
        }

        if (updelay < 0) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: updelay module parameter (%d), "
                       "not in range 0-%d, so it was reset to 0\n",
                       updelay, INT_MAX);
                updelay = 0;
        }

        if (downdelay < 0) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: downdelay module parameter (%d), "
                       "not in range 0-%d, so it was reset to 0\n",
                       downdelay, INT_MAX);
                downdelay = 0;
        }

        if ((use_carrier != 0) && (use_carrier != 1)) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: use_carrier module parameter (%d), "
                       "not of valid value (0/1), so it was set to 1\n",
                       use_carrier);
                use_carrier = 1;
        }

        if (num_grat_arp < 0 || num_grat_arp > 255) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: num_grat_arp (%d) not in range 0-255 so it "
                       "was reset to 1 \n", num_grat_arp);
                num_grat_arp = 1;
        }

        /* reset values for 802.3ad */
        if (bond_mode == BOND_MODE_8023AD) {
                if (!miimon) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: miimon must be specified, "
                               "otherwise bonding will not detect link "
                               "failure, speed and duplex which are "
                               "essential for 802.3ad operation\n");
                        printk(KERN_WARNING "Forcing miimon to 100msec\n");
                        miimon = 100;
                }
        }

        /* reset values for TLB/ALB */
        if ((bond_mode == BOND_MODE_TLB) ||
            (bond_mode == BOND_MODE_ALB)) {
                if (!miimon) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: miimon must be specified, "
                               "otherwise bonding will not detect link "
                               "failure and link speed which are essential "
                               "for TLB/ALB load balancing\n");
                        printk(KERN_WARNING "Forcing miimon to 100msec\n");
                        miimon = 100;
                }
        }

        if (bond_mode == BOND_MODE_ALB) {
                printk(KERN_NOTICE DRV_NAME
                       ": In ALB mode you might experience client "
                       "disconnections upon reconnection of a link if the "
                       "bonding module updelay parameter (%d msec) is "
                       "incompatible with the forwarding delay time of the "
                       "switch\n",
                       updelay);
        }

        if (!miimon) {
                if (updelay || downdelay) {
                        /* just warn the user the up/down delay will have
                         * no effect since miimon is zero...
                         */
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: miimon module parameter not set "
                               "and updelay (%d) or downdelay (%d) module "
                               "parameter is set; updelay and downdelay have "
                               "no effect unless miimon is set\n",
                               updelay, downdelay);
                }
        } else {
                /* don't allow arp monitoring */
                if (arp_interval) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: miimon (%d) and arp_interval (%d) "
                               "can't be used simultaneously, disabling ARP "
                               "monitoring\n",
                               miimon, arp_interval);
                        arp_interval = 0;
                }

                if ((updelay % miimon) != 0) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: updelay (%d) is not a multiple "
                               "of miimon (%d), updelay rounded to %d ms\n",
                               updelay, miimon, (updelay / miimon) * miimon);
                }

                updelay /= miimon;

                if ((downdelay % miimon) != 0) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: downdelay (%d) is not a multiple "
                               "of miimon (%d), downdelay rounded to %d ms\n",
                               downdelay, miimon,
                               (downdelay / miimon) * miimon);
                }

                downdelay /= miimon;
        }

        if (arp_interval < 0) {
                printk(KERN_WARNING DRV_NAME
                       ": Warning: arp_interval module parameter (%d) "
                       ", not in range 0-%d, so it was reset to %d\n",
                       arp_interval, INT_MAX, BOND_LINK_ARP_INTERV);
                arp_interval = BOND_LINK_ARP_INTERV;
        }

        for (arp_ip_count = 0;
             (arp_ip_count < BOND_MAX_ARP_TARGETS) && arp_ip_target[arp_ip_count];
             arp_ip_count++) {
                /* not complete check, but should be good enough to
                   catch mistakes */
                if (!isdigit(arp_ip_target[arp_ip_count][0])) {
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: bad arp_ip_target module parameter "
                               "(%s), ARP monitoring will not be performed\n",
                               arp_ip_target[arp_ip_count]);
                        arp_interval = 0;
                } else {
                        __be32 ip = in_aton(arp_ip_target[arp_ip_count]);
                        arp_target[arp_ip_count] = ip;
                }
        }

        if (arp_interval && !arp_ip_count) {
                /* don't allow arping if no arp_ip_target given... */
                printk(KERN_WARNING DRV_NAME
                       ": Warning: arp_interval module parameter (%d) "
                       "specified without providing an arp_ip_target "
                       "parameter, arp_interval was reset to 0\n",
                       arp_interval);
                arp_interval = 0;
        }

        if (arp_validate) {
                if (bond_mode != BOND_MODE_ACTIVEBACKUP) {
                        printk(KERN_ERR DRV_NAME
               ": arp_validate only supported in active-backup mode\n");
                        return -EINVAL;
                }
                if (!arp_interval) {
                        printk(KERN_ERR DRV_NAME
                               ": arp_validate requires arp_interval\n");
                        return -EINVAL;
                }

                arp_validate_value = bond_parse_parm(arp_validate,
                                                     arp_validate_tbl);
                if (arp_validate_value == -1) {
                        printk(KERN_ERR DRV_NAME
                               ": Error: invalid arp_validate \"%s\"\n",
                               arp_validate == NULL ? "NULL" : arp_validate);
                        return -EINVAL;
                }
        } else
                arp_validate_value = 0;

        if (miimon) {
                printk(KERN_INFO DRV_NAME
                       ": MII link monitoring set to %d ms\n",
                       miimon);
        } else if (arp_interval) {
                int i;

                printk(KERN_INFO DRV_NAME
                       ": ARP monitoring set to %d ms, validate %s, with %d target(s):",
                       arp_interval,
                       arp_validate_tbl[arp_validate_value].modename,
                       arp_ip_count);

                for (i = 0; i < arp_ip_count; i++)
                        printk (" %s", arp_ip_target[i]);

                printk("\n");

        } else if (max_bonds) {
                /* miimon and arp_interval not set, we need one so things
                 * work as expected, see bonding.txt for details
                 */
                printk(KERN_WARNING DRV_NAME
                       ": Warning: either miimon or arp_interval and "
                       "arp_ip_target module parameters must be specified, "
                       "otherwise bonding will not detect link failures! see "
                       "bonding.txt for details.\n");
        }

        if (primary && !USES_PRIMARY(bond_mode)) {
                /* currently, using a primary only makes sense
                 * in active backup, TLB or ALB modes
                 */
                printk(KERN_WARNING DRV_NAME
                       ": Warning: %s primary device specified but has no "
                       "effect in %s mode\n",
                       primary, bond_mode_name(bond_mode));
                primary = NULL;
        }

        if (fail_over_mac) {
                fail_over_mac_value = bond_parse_parm(fail_over_mac,
                                                      fail_over_mac_tbl);
                if (fail_over_mac_value == -1) {
                        printk(KERN_ERR DRV_NAME
                               ": Error: invalid fail_over_mac \"%s\"\n",
                               arp_validate == NULL ? "NULL" : arp_validate);
                        return -EINVAL;
                }

                if (bond_mode != BOND_MODE_ACTIVEBACKUP)
                        printk(KERN_WARNING DRV_NAME
                               ": Warning: fail_over_mac only affects "
                               "active-backup mode.\n");
        } else {
                fail_over_mac_value = BOND_FOM_NONE;
        }

        /* fill params struct with the proper values */
        params->mode = bond_mode;
        params->xmit_policy = xmit_hashtype;
        params->miimon = miimon;
        params->num_grat_arp = num_grat_arp;
        params->arp_interval = arp_interval;
        params->arp_validate = arp_validate_value;
        params->updelay = updelay;
        params->downdelay = downdelay;
        params->use_carrier = use_carrier;
        params->lacp_fast = lacp_fast;
        params->primary[0] = 0;
        params->fail_over_mac = fail_over_mac_value;

        if (primary) {
                strncpy(params->primary, primary, IFNAMSIZ);
                params->primary[IFNAMSIZ - 1] = 0;
        }

        memcpy(params->arp_targets, arp_target, sizeof(arp_target));

        return 0;
}

static struct lock_class_key bonding_netdev_xmit_lock_key;
static struct lock_class_key bonding_netdev_addr_lock_key;

static void bond_set_lockdep_class_one(struct net_device *dev,
                                       struct netdev_queue *txq,
                                       void *_unused)
{
        lockdep_set_class(&txq->_xmit_lock,
                          &bonding_netdev_xmit_lock_key);
}

static void bond_set_lockdep_class(struct net_device *dev)
{
        lockdep_set_class(&dev->addr_list_lock,
                          &bonding_netdev_addr_lock_key);
        netdev_for_each_tx_queue(dev, bond_set_lockdep_class_one, NULL);
}

/* Create a new bond based on the specified name and bonding parameters.
 * If name is NULL, obtain a suitable "bond%d" name for us.
 * Caller must NOT hold rtnl_lock; we need to release it here before we
 * set up our sysfs entries.
 */
int bond_create(char *name, struct bond_params *params)
{
        struct net_device *bond_dev;
        struct bonding *bond;
        int res;

        rtnl_lock();
        down_write(&bonding_rwsem);

        /* Check to see if the bond already exists. */
        if (name) {
                list_for_each_entry(bond, &bond_dev_list, bond_list)
                        if (strnicmp(bond->dev->name, name, IFNAMSIZ) == 0) {
                                printk(KERN_ERR DRV_NAME
                               ": cannot add bond %s; it already exists\n",
                                       name);
                                res = -EPERM;
                                goto out_rtnl;
                        }
        }

        bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
                                ether_setup);
        if (!bond_dev) {
                printk(KERN_ERR DRV_NAME
                       ": %s: eek! can't alloc netdev!\n",
                       name);
                res = -ENOMEM;
                goto out_rtnl;
        }

        if (!name) {
                res = dev_alloc_name(bond_dev, "bond%d");
                if (res < 0)
                        goto out_netdev;
        }

        /* bond_init() must be called after dev_alloc_name() (for the
         * /proc files), but before register_netdevice(), because we
         * need to set function pointers.
         */

        res = bond_init(bond_dev, params);
        if (res < 0) {
                goto out_netdev;
        }

        res = register_netdevice(bond_dev);
        if (res < 0) {
                goto out_bond;
        }

        bond_set_lockdep_class(bond_dev);

        netif_carrier_off(bond_dev);

        up_write(&bonding_rwsem);
        rtnl_unlock(); /* allows sysfs registration of net device */
        res = bond_create_sysfs_entry(bond_dev->priv);
        if (res < 0) {
                rtnl_lock();
                down_write(&bonding_rwsem);
                bond_deinit(bond_dev);
                unregister_netdevice(bond_dev);
                goto out_rtnl;
        }

        return 0;

out_bond:
        bond_deinit(bond_dev);
out_netdev:
        free_netdev(bond_dev);
out_rtnl:
        up_write(&bonding_rwsem);
        rtnl_unlock();
        return res;
}

static int __init bonding_init(void)
{
        int i;
        int res;
        struct bonding *bond;

        printk(KERN_INFO "%s", version);

        res = bond_check_params(&bonding_defaults);
        if (res) {
                goto out;
        }

#ifdef CONFIG_PROC_FS
        bond_create_proc_dir();
#endif

        init_rwsem(&bonding_rwsem);

        for (i = 0; i < max_bonds; i++) {
                res = bond_create(NULL, &bonding_defaults);
                if (res)
                        goto err;
        }

        res = bond_create_sysfs();
        if (res)
                goto err;

        register_netdevice_notifier(&bond_netdev_notifier);
        register_inetaddr_notifier(&bond_inetaddr_notifier);

        goto out;
err:
        list_for_each_entry(bond, &bond_dev_list, bond_list) {
                bond_work_cancel_all(bond);
                destroy_workqueue(bond->wq);
        }

        bond_destroy_sysfs();

        rtnl_lock();
        bond_free_all();
        rtnl_unlock();
out:
        return res;

}

static void __exit bonding_exit(void)
{
        unregister_netdevice_notifier(&bond_netdev_notifier);
        unregister_inetaddr_notifier(&bond_inetaddr_notifier);

        bond_destroy_sysfs();

        rtnl_lock();
        bond_free_all();
        rtnl_unlock();
}

module_init(bonding_init);
module_exit(bonding_exit);
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DESCRIPTION(DRV_DESCRIPTION ", v" DRV_VERSION);
MODULE_AUTHOR("Thomas Davis, tadavis@lbl.gov and many others");
MODULE_SUPPORTED_DEVICE("most ethernet devices");

/*
 * Local variables:
 *  c-indent-level: 8
 *  c-basic-offset: 8
 *  tab-width: 8
 * End:
 */