2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: Data structures and registers for the rt61pci module.
24 Supported chipsets: RT2561, RT2561s, RT2661.
40 * Defaul offset is required for RSSI <-> dBm conversion.
42 #define DEFAULT_RSSI_OFFSET 120
45 * Register layout information.
47 #define CSR_REG_BASE 0x3000
48 #define CSR_REG_SIZE 0x04b0
49 #define EEPROM_BASE 0x0000
50 #define EEPROM_SIZE 0x0100
51 #define BBP_SIZE 0x0080
52 #define RF_SIZE 0x0014
55 * Number of TX queues.
57 #define NUM_TX_QUEUES 4
64 * PCI Configuration Header
66 #define PCI_CONFIG_HEADER_VENDOR 0x0000
67 #define PCI_CONFIG_HEADER_DEVICE 0x0002
70 * HOST_CMD_CSR: For HOST to interrupt embedded processor
72 #define HOST_CMD_CSR 0x0008
73 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
74 #define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
78 * SELECT_BANK: Select 8051 program bank.
79 * RESET: Enable 8051 reset state.
80 * READY: Ready state for 8051.
82 #define MCU_CNTL_CSR 0x000c
83 #define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
84 #define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
85 #define MCU_CNTL_CSR_READY FIELD32(0x00000004)
90 #define SOFT_RESET_CSR 0x0010
93 * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
95 #define MCU_INT_SOURCE_CSR 0x0014
96 #define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
97 #define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
98 #define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
99 #define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
100 #define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
101 #define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
102 #define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
103 #define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
104 #define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
105 #define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
108 * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
110 #define MCU_INT_MASK_CSR 0x0018
111 #define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
112 #define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
113 #define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
114 #define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
115 #define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
116 #define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
117 #define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
118 #define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
119 #define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
120 #define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
125 #define PCI_USEC_CSR 0x001c
128 * Security key table memory.
129 * 16 entries 32-byte for shared key table
130 * 64 entries 32-byte for pairwise key table
131 * 64 entries 8-byte for pairwise ta key table
133 #define SHARED_KEY_TABLE_BASE 0x1000
134 #define PAIRWISE_KEY_TABLE_BASE 0x1200
135 #define PAIRWISE_TA_TABLE_BASE 0x1a00
137 #define SHARED_KEY_ENTRY(__idx) \
138 ( SHARED_KEY_TABLE_BASE + \
139 ((__idx) * sizeof(struct hw_key_entry)) )
140 #define PAIRWISE_KEY_ENTRY(__idx) \
141 ( PAIRWISE_KEY_TABLE_BASE + \
142 ((__idx) * sizeof(struct hw_key_entry)) )
143 #define PAIRWISE_TA_ENTRY(__idx) \
144 ( PAIRWISE_TA_TABLE_BASE + \
145 ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
147 struct hw_key_entry {
151 } __attribute__ ((packed));
153 struct hw_pairwise_ta_entry {
157 } __attribute__ ((packed));
160 * Other on-chip shared memory space.
162 #define HW_CIS_BASE 0x2000
163 #define HW_NULL_BASE 0x2b00
166 * Since NULL frame won't be that long (256 byte),
167 * We steal 16 tail bytes to save debugging settings.
169 #define HW_DEBUG_SETTING_BASE 0x2bf0
172 * On-chip BEACON frame space.
174 #define HW_BEACON_BASE0 0x2c00
175 #define HW_BEACON_BASE1 0x2d00
176 #define HW_BEACON_BASE2 0x2e00
177 #define HW_BEACON_BASE3 0x2f00
179 #define HW_BEACON_OFFSET(__index) \
180 ( HW_BEACON_BASE0 + (__index * 0x0100) )
183 * HOST-MCU shared memory.
187 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
189 #define H2M_MAILBOX_CSR 0x2100
190 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
191 #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
192 #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
193 #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
196 * MCU_LEDCS: LED control for MCU Mailbox.
198 #define MCU_LEDCS_LED_MODE FIELD16(0x001f)
199 #define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
200 #define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
201 #define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
202 #define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
203 #define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
204 #define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
205 #define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
206 #define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
207 #define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
208 #define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
209 #define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
214 #define M2H_CMD_DONE_CSR 0x2104
217 * MCU_TXOP_ARRAY_BASE.
219 #define MCU_TXOP_ARRAY_BASE 0x2110
222 * MAC Control/Status Registers(CSR).
223 * Some values are set in TU, whereas 1 TU == 1024 us.
227 * MAC_CSR0: ASIC revision number.
229 #define MAC_CSR0 0x3000
232 * MAC_CSR1: System control register.
233 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
234 * BBP_RESET: Hardware reset BBP.
235 * HOST_READY: Host is ready after initialization, 1: ready.
237 #define MAC_CSR1 0x3004
238 #define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
239 #define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
240 #define MAC_CSR1_HOST_READY FIELD32(0x00000004)
243 * MAC_CSR2: STA MAC register 0.
245 #define MAC_CSR2 0x3008
246 #define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
247 #define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
248 #define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
249 #define MAC_CSR2_BYTE3 FIELD32(0xff000000)
252 * MAC_CSR3: STA MAC register 1.
253 * UNICAST_TO_ME_MASK:
254 * Used to mask off bits from byte 5 of the MAC address
255 * to determine the UNICAST_TO_ME bit for RX frames.
256 * The full mask is complemented by BSS_ID_MASK:
257 * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
259 #define MAC_CSR3 0x300c
260 #define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
261 #define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
262 #define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
265 * MAC_CSR4: BSSID register 0.
267 #define MAC_CSR4 0x3010
268 #define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
269 #define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
270 #define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
271 #define MAC_CSR4_BYTE3 FIELD32(0xff000000)
274 * MAC_CSR5: BSSID register 1.
276 * This mask is used to mask off bits 0 and 1 of byte 5 of the
277 * BSSID. This will make sure that those bits will be ignored
278 * when determining the MY_BSS of RX frames.
279 * 0: 1-BSSID mode (BSS index = 0)
280 * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
281 * 2: 2-BSSID mode (BSS index: byte5, bit 1)
282 * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
284 #define MAC_CSR5 0x3014
285 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
286 #define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
287 #define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
290 * MAC_CSR6: Maximum frame length register.
292 #define MAC_CSR6 0x3018
293 #define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
298 #define MAC_CSR7 0x301c
301 * MAC_CSR8: SIFS/EIFS register.
302 * All units are in US.
304 #define MAC_CSR8 0x3020
305 #define MAC_CSR8_SIFS FIELD32(0x000000ff)
306 #define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
307 #define MAC_CSR8_EIFS FIELD32(0xffff0000)
310 * MAC_CSR9: Back-Off control register.
311 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
312 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
313 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
314 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
316 #define MAC_CSR9 0x3024
317 #define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
318 #define MAC_CSR9_CWMIN FIELD32(0x00000f00)
319 #define MAC_CSR9_CWMAX FIELD32(0x0000f000)
320 #define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
323 * MAC_CSR10: Power state configuration.
325 #define MAC_CSR10 0x3028
328 * MAC_CSR11: Power saving transition time register.
329 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
330 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
331 * WAKEUP_LATENCY: In unit of TU.
333 #define MAC_CSR11 0x302c
334 #define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
335 #define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
336 #define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
337 #define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
340 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
341 * CURRENT_STATE: 0:sleep, 1:awake.
342 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
343 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
345 #define MAC_CSR12 0x3030
346 #define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
347 #define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
348 #define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
349 #define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
354 #define MAC_CSR13 0x3034
355 #define MAC_CSR13_BIT0 FIELD32(0x00000001)
356 #define MAC_CSR13_BIT1 FIELD32(0x00000002)
357 #define MAC_CSR13_BIT2 FIELD32(0x00000004)
358 #define MAC_CSR13_BIT3 FIELD32(0x00000008)
359 #define MAC_CSR13_BIT4 FIELD32(0x00000010)
360 #define MAC_CSR13_BIT5 FIELD32(0x00000020)
361 #define MAC_CSR13_BIT6 FIELD32(0x00000040)
362 #define MAC_CSR13_BIT7 FIELD32(0x00000080)
363 #define MAC_CSR13_BIT8 FIELD32(0x00000100)
364 #define MAC_CSR13_BIT9 FIELD32(0x00000200)
365 #define MAC_CSR13_BIT10 FIELD32(0x00000400)
366 #define MAC_CSR13_BIT11 FIELD32(0x00000800)
367 #define MAC_CSR13_BIT12 FIELD32(0x00001000)
370 * MAC_CSR14: LED control register.
371 * ON_PERIOD: On period, default 70ms.
372 * OFF_PERIOD: Off period, default 30ms.
373 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
374 * SW_LED: s/w LED, 1: ON, 0: OFF.
375 * HW_LED_POLARITY: 0: active low, 1: active high.
377 #define MAC_CSR14 0x3038
378 #define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
379 #define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
380 #define MAC_CSR14_HW_LED FIELD32(0x00010000)
381 #define MAC_CSR14_SW_LED FIELD32(0x00020000)
382 #define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
383 #define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
386 * MAC_CSR15: NAV control.
388 #define MAC_CSR15 0x303c
391 * TXRX control registers.
392 * Some values are set in TU, whereas 1 TU == 1024 us.
396 * TXRX_CSR0: TX/RX configuration register.
397 * TSF_OFFSET: Default is 24.
398 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
399 * DISABLE_RX: Disable Rx engine.
400 * DROP_CRC: Drop CRC error.
401 * DROP_PHYSICAL: Drop physical error.
402 * DROP_CONTROL: Drop control frame.
403 * DROP_NOT_TO_ME: Drop not to me unicast frame.
404 * DROP_TO_DS: Drop fram ToDs bit is true.
405 * DROP_VERSION_ERROR: Drop version error frame.
406 * DROP_MULTICAST: Drop multicast frames.
407 * DROP_BORADCAST: Drop broadcast frames.
408 * ROP_ACK_CTS: Drop received ACK and CTS.
410 #define TXRX_CSR0 0x3040
411 #define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
412 #define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
413 #define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
414 #define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
415 #define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
416 #define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
417 #define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
418 #define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
419 #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
420 #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
421 #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
422 #define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
423 #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
424 #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
429 #define TXRX_CSR1 0x3044
430 #define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
431 #define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
432 #define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
433 #define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
434 #define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
435 #define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
436 #define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
437 #define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
442 #define TXRX_CSR2 0x3048
443 #define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
444 #define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
445 #define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
446 #define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
447 #define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
448 #define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
449 #define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
450 #define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
455 #define TXRX_CSR3 0x304c
456 #define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
457 #define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
458 #define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
459 #define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
460 #define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
461 #define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
462 #define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
463 #define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
466 * TXRX_CSR4: Auto-Responder/Tx-retry register.
467 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
468 * OFDM_TX_RATE_DOWN: 1:enable.
469 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
470 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
472 #define TXRX_CSR4 0x3050
473 #define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
474 #define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
475 #define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
476 #define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
477 #define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
478 #define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
479 #define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
480 #define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
481 #define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
482 #define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
487 #define TXRX_CSR5 0x3054
490 * TXRX_CSR6: ACK/CTS payload consumed time
492 #define TXRX_CSR6 0x3058
495 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
497 #define TXRX_CSR7 0x305c
498 #define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
499 #define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
500 #define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
501 #define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
504 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
506 #define TXRX_CSR8 0x3060
507 #define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
508 #define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
509 #define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
510 #define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
513 * TXRX_CSR9: Synchronization control register.
514 * BEACON_INTERVAL: In unit of 1/16 TU.
515 * TSF_TICKING: Enable TSF auto counting.
516 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
517 * BEACON_GEN: Enable beacon generator.
519 #define TXRX_CSR9 0x3064
520 #define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
521 #define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
522 #define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
523 #define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
524 #define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
525 #define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
528 * TXRX_CSR10: BEACON alignment.
530 #define TXRX_CSR10 0x3068
533 * TXRX_CSR11: AES mask.
535 #define TXRX_CSR11 0x306c
538 * TXRX_CSR12: TSF low 32.
540 #define TXRX_CSR12 0x3070
541 #define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
544 * TXRX_CSR13: TSF high 32.
546 #define TXRX_CSR13 0x3074
547 #define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
550 * TXRX_CSR14: TBTT timer.
552 #define TXRX_CSR14 0x3078
555 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
557 #define TXRX_CSR15 0x307c
560 * PHY control registers.
561 * Some values are set in TU, whereas 1 TU == 1024 us.
565 * PHY_CSR0: RF/PS control.
567 #define PHY_CSR0 0x3080
568 #define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
569 #define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
574 #define PHY_CSR1 0x3084
577 * PHY_CSR2: Pre-TX BBP control.
579 #define PHY_CSR2 0x3088
582 * PHY_CSR3: BBP serial control register.
583 * VALUE: Register value to program into BBP.
584 * REG_NUM: Selected BBP register.
585 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
586 * BUSY: 1: ASIC is busy execute BBP programming.
588 #define PHY_CSR3 0x308c
589 #define PHY_CSR3_VALUE FIELD32(0x000000ff)
590 #define PHY_CSR3_REGNUM FIELD32(0x00007f00)
591 #define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
592 #define PHY_CSR3_BUSY FIELD32(0x00010000)
595 * PHY_CSR4: RF serial control register
596 * VALUE: Register value (include register id) serial out to RF/IF chip.
597 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
598 * IF_SELECT: 1: select IF to program, 0: select RF to program.
599 * PLL_LD: RF PLL_LD status.
600 * BUSY: 1: ASIC is busy execute RF programming.
602 #define PHY_CSR4 0x3090
603 #define PHY_CSR4_VALUE FIELD32(0x00ffffff)
604 #define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
605 #define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
606 #define PHY_CSR4_PLL_LD FIELD32(0x40000000)
607 #define PHY_CSR4_BUSY FIELD32(0x80000000)
610 * PHY_CSR5: RX to TX signal switch timing control.
612 #define PHY_CSR5 0x3094
613 #define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
616 * PHY_CSR6: TX to RX signal timing control.
618 #define PHY_CSR6 0x3098
619 #define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
622 * PHY_CSR7: TX DAC switching timing control.
624 #define PHY_CSR7 0x309c
627 * Security control register.
631 * SEC_CSR0: Shared key table control.
633 #define SEC_CSR0 0x30a0
634 #define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
635 #define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
636 #define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
637 #define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
638 #define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
639 #define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
640 #define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
641 #define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
642 #define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
643 #define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
644 #define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
645 #define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
646 #define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
647 #define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
648 #define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
649 #define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
652 * SEC_CSR1: Shared key table security mode register.
654 #define SEC_CSR1 0x30a4
655 #define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
656 #define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
657 #define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
658 #define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
659 #define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
660 #define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
661 #define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
662 #define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
665 * Pairwise key table valid bitmap registers.
666 * SEC_CSR2: pairwise key table valid bitmap 0.
667 * SEC_CSR3: pairwise key table valid bitmap 1.
669 #define SEC_CSR2 0x30a8
670 #define SEC_CSR3 0x30ac
673 * SEC_CSR4: Pairwise key table lookup control.
675 #define SEC_CSR4 0x30b0
676 #define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
677 #define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
678 #define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
679 #define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
682 * SEC_CSR5: shared key table security mode register.
684 #define SEC_CSR5 0x30b4
685 #define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
686 #define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
687 #define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
688 #define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
689 #define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
690 #define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
691 #define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
692 #define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
695 * STA control registers.
699 * STA_CSR0: RX PLCP error count & RX FCS error count.
701 #define STA_CSR0 0x30c0
702 #define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
703 #define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
706 * STA_CSR1: RX False CCA count & RX LONG frame count.
708 #define STA_CSR1 0x30c4
709 #define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
710 #define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
713 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
715 #define STA_CSR2 0x30c8
716 #define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
717 #define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
720 * STA_CSR3: TX Beacon count.
722 #define STA_CSR3 0x30cc
723 #define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
726 * STA_CSR4: TX Result status register.
727 * VALID: 1:This register contains a valid TX result.
729 #define STA_CSR4 0x30d0
730 #define STA_CSR4_VALID FIELD32(0x00000001)
731 #define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
732 #define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
733 #define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
734 #define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
735 #define STA_CSR4_TXRATE FIELD32(0x000f0000)
738 * QOS control registers.
742 * QOS_CSR0: TXOP holder MAC address register.
744 #define QOS_CSR0 0x30e0
745 #define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
746 #define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
747 #define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
748 #define QOS_CSR0_BYTE3 FIELD32(0xff000000)
751 * QOS_CSR1: TXOP holder MAC address register.
753 #define QOS_CSR1 0x30e4
754 #define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
755 #define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
758 * QOS_CSR2: TXOP holder timeout register.
760 #define QOS_CSR2 0x30e8
763 * RX QOS-CFPOLL MAC address register.
764 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
765 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
767 #define QOS_CSR3 0x30ec
768 #define QOS_CSR4 0x30f0
771 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
773 #define QOS_CSR5 0x30f4
776 * Host DMA registers.
780 * AC0_BASE_CSR: AC_BK base address.
782 #define AC0_BASE_CSR 0x3400
783 #define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
786 * AC1_BASE_CSR: AC_BE base address.
788 #define AC1_BASE_CSR 0x3404
789 #define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
792 * AC2_BASE_CSR: AC_VI base address.
794 #define AC2_BASE_CSR 0x3408
795 #define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
798 * AC3_BASE_CSR: AC_VO base address.
800 #define AC3_BASE_CSR 0x340c
801 #define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
804 * MGMT_BASE_CSR: MGMT ring base address.
806 #define MGMT_BASE_CSR 0x3410
807 #define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
810 * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
812 #define TX_RING_CSR0 0x3418
813 #define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
814 #define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
815 #define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
816 #define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
819 * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
820 * TXD_SIZE: In unit of 32-bit.
822 #define TX_RING_CSR1 0x341c
823 #define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
824 #define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
825 #define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
828 * AIFSN_CSR: AIFSN for each EDCA AC.
834 #define AIFSN_CSR 0x3420
835 #define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
836 #define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
837 #define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
838 #define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
841 * CWMIN_CSR: CWmin for each EDCA AC.
847 #define CWMIN_CSR 0x3424
848 #define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
849 #define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
850 #define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
851 #define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
854 * CWMAX_CSR: CWmax for each EDCA AC.
860 #define CWMAX_CSR 0x3428
861 #define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
862 #define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
863 #define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
864 #define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
867 * TX_DMA_DST_CSR: TX DMA destination
868 * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
870 #define TX_DMA_DST_CSR 0x342c
871 #define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
872 #define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
873 #define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
874 #define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
875 #define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
878 * TX_CNTL_CSR: KICK/Abort TX.
879 * KICK_TX_AC0: For AC_BK.
880 * KICK_TX_AC1: For AC_BE.
881 * KICK_TX_AC2: For AC_VI.
882 * KICK_TX_AC3: For AC_VO.
883 * ABORT_TX_AC0: For AC_BK.
884 * ABORT_TX_AC1: For AC_BE.
885 * ABORT_TX_AC2: For AC_VI.
886 * ABORT_TX_AC3: For AC_VO.
888 #define TX_CNTL_CSR 0x3430
889 #define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
890 #define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
891 #define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
892 #define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
893 #define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
894 #define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
895 #define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
896 #define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
897 #define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
898 #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
901 * LOAD_TX_RING_CSR: Load RX desriptor
903 #define LOAD_TX_RING_CSR 0x3434
904 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
905 #define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
906 #define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
907 #define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
908 #define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
911 * Several read-only registers, for debugging.
913 #define AC0_TXPTR_CSR 0x3438
914 #define AC1_TXPTR_CSR 0x343c
915 #define AC2_TXPTR_CSR 0x3440
916 #define AC3_TXPTR_CSR 0x3444
917 #define MGMT_TXPTR_CSR 0x3448
922 #define RX_BASE_CSR 0x3450
923 #define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
927 * RXD_SIZE: In unit of 32-bit.
929 #define RX_RING_CSR 0x3454
930 #define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
931 #define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
932 #define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
937 #define RX_CNTL_CSR 0x3458
938 #define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
939 #define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
942 * RXPTR_CSR: Read-only, for debugging.
944 #define RXPTR_CSR 0x345c
949 #define PCI_CFG_CSR 0x3460
954 #define BUF_FORMAT_CSR 0x3464
957 * INT_SOURCE_CSR: Interrupt source register.
958 * Write one to clear corresponding bit.
960 #define INT_SOURCE_CSR 0x3468
961 #define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
962 #define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
963 #define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
964 #define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
965 #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
966 #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
967 #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
968 #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
969 #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
970 #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
973 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
974 * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
976 #define INT_MASK_CSR 0x346c
977 #define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
978 #define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
979 #define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
980 #define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
981 #define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
982 #define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
983 #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
984 #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
985 #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
986 #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
987 #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
988 #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
991 * E2PROM_CSR: EEPROM control register.
992 * RELOAD: Write 1 to reload eeprom content.
993 * TYPE_93C46: 1: 93c46, 0:93c66.
994 * LOAD_STATUS: 1:loading, 0:done.
996 #define E2PROM_CSR 0x3470
997 #define E2PROM_CSR_RELOAD FIELD32(0x00000001)
998 #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
999 #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
1000 #define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
1001 #define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
1002 #define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
1003 #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
1006 * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
1007 * AC0_TX_OP: For AC_BK, in unit of 32us.
1008 * AC1_TX_OP: For AC_BE, in unit of 32us.
1010 #define AC_TXOP_CSR0 0x3474
1011 #define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
1012 #define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
1015 * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
1016 * AC2_TX_OP: For AC_VI, in unit of 32us.
1017 * AC3_TX_OP: For AC_VO, in unit of 32us.
1019 #define AC_TXOP_CSR1 0x3478
1020 #define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
1021 #define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
1026 #define DMA_STATUS_CSR 0x3480
1031 #define TEST_MODE_CSR 0x3484
1036 #define UART0_TX_CSR 0x3488
1041 #define UART0_RX_CSR 0x348c
1046 #define UART0_FRAME_CSR 0x3490
1051 #define UART0_BUFFER_CSR 0x3494
1056 #define IO_CNTL_CSR 0x3498
1059 * UART_INT_SOURCE_CSR
1061 #define UART_INT_SOURCE_CSR 0x34a8
1066 #define UART_INT_MASK_CSR 0x34ac
1071 #define PBF_QUEUE_CSR 0x34b0
1074 * Firmware DMA registers.
1075 * Firmware DMA registers are dedicated for MCU usage
1076 * and should not be touched by host driver.
1077 * Therefore we skip the definition of these registers.
1079 #define FW_TX_BASE_CSR 0x34c0
1080 #define FW_TX_START_CSR 0x34c4
1081 #define FW_TX_LAST_CSR 0x34c8
1082 #define FW_MODE_CNTL_CSR 0x34cc
1083 #define FW_TXPTR_CSR 0x34d0
1086 * 8051 firmware image.
1088 #define FIRMWARE_RT2561 "rt2561.bin"
1089 #define FIRMWARE_RT2561s "rt2561s.bin"
1090 #define FIRMWARE_RT2661 "rt2661.bin"
1091 #define FIRMWARE_IMAGE_BASE 0x4000
1095 * The wordsize of the BBP is 8 bits.
1101 #define BBP_R2_BG_MODE FIELD8(0x20)
1106 #define BBP_R3_SMART_MODE FIELD8(0x01)
1109 * R4: RX antenna control
1110 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
1114 * ANTENNA_CONTROL semantics (guessed):
1115 * 0x1: Software controlled antenna switching (fixed or SW diversity)
1116 * 0x2: Hardware diversity.
1118 #define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
1119 #define BBP_R4_RX_FRAME_END FIELD8(0x20)
1124 #define BBP_R77_RX_ANTENNA FIELD8(0x03)
1133 #define RF3_TXPOWER FIELD32(0x00003e00)
1138 #define RF4_FREQ_OFFSET FIELD32(0x0003f000)
1142 * The wordsize of the EEPROM is 16 bits.
1148 #define EEPROM_MAC_ADDR_0 0x0002
1149 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1150 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1151 #define EEPROM_MAC_ADDR1 0x0003
1152 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1153 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1154 #define EEPROM_MAC_ADDR_2 0x0004
1155 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1156 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1160 * ANTENNA_NUM: Number of antenna's.
1161 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1162 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1163 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
1164 * DYN_TXAGC: Dynamic TX AGC control.
1165 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1166 * RF_TYPE: Rf_type of this adapter.
1168 #define EEPROM_ANTENNA 0x0010
1169 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1170 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1171 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1172 #define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
1173 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1174 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1175 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1178 * EEPROM NIC config.
1179 * ENABLE_DIVERSITY: 1:enable, 0:disable.
1180 * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
1181 * CARDBUS_ACCEL: 0:enable, 1:disable.
1182 * EXTERNAL_LNA_A: External LNA enable for 5G.
1184 #define EEPROM_NIC 0x0011
1185 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
1186 #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
1187 #define EEPROM_NIC_TX_RX_FIXED FIELD16(0x000c)
1188 #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
1189 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
1190 #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
1194 * GEO_A: Default geographical setting for 5GHz band
1195 * GEO: Default geographical setting.
1197 #define EEPROM_GEOGRAPHY 0x0012
1198 #define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
1199 #define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
1204 #define EEPROM_BBP_START 0x0013
1205 #define EEPROM_BBP_SIZE 16
1206 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
1207 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
1210 * EEPROM TXPOWER 802.11G
1212 #define EEPROM_TXPOWER_G_START 0x0023
1213 #define EEPROM_TXPOWER_G_SIZE 7
1214 #define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
1215 #define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
1220 #define EEPROM_FREQ 0x002f
1221 #define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
1222 #define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
1223 #define EEPROM_FREQ_SEQ FIELD16(0x0300)
1227 * POLARITY_RDY_G: Polarity RDY_G setting.
1228 * POLARITY_RDY_A: Polarity RDY_A setting.
1229 * POLARITY_ACT: Polarity ACT setting.
1230 * POLARITY_GPIO_0: Polarity GPIO0 setting.
1231 * POLARITY_GPIO_1: Polarity GPIO1 setting.
1232 * POLARITY_GPIO_2: Polarity GPIO2 setting.
1233 * POLARITY_GPIO_3: Polarity GPIO3 setting.
1234 * POLARITY_GPIO_4: Polarity GPIO4 setting.
1235 * LED_MODE: Led mode.
1237 #define EEPROM_LED 0x0030
1238 #define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
1239 #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
1240 #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
1241 #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
1242 #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
1243 #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
1244 #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
1245 #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
1246 #define EEPROM_LED_LED_MODE FIELD16(0x1f00)
1249 * EEPROM TXPOWER 802.11A
1251 #define EEPROM_TXPOWER_A_START 0x0031
1252 #define EEPROM_TXPOWER_A_SIZE 12
1253 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
1254 #define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
1257 * EEPROM RSSI offset 802.11BG
1259 #define EEPROM_RSSI_OFFSET_BG 0x004d
1260 #define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
1261 #define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
1264 * EEPROM RSSI offset 802.11A
1266 #define EEPROM_RSSI_OFFSET_A 0x004e
1267 #define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
1268 #define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
1271 * MCU mailbox commands.
1273 #define MCU_SLEEP 0x30
1274 #define MCU_WAKEUP 0x31
1275 #define MCU_LED 0x50
1276 #define MCU_LED_STRENGTH 0x52
1279 * DMA descriptor defines.
1281 #define TXD_DESC_SIZE ( 16 * sizeof(__le32) )
1282 #define TXINFO_SIZE ( 6 * sizeof(__le32) )
1283 #define RXD_DESC_SIZE ( 16 * sizeof(__le32) )
1286 * TX descriptor format for TX, PRIO and Beacon Ring.
1291 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
1292 * KEY_TABLE: Use per-client pairwise KEY table.
1294 * Key index (0~31) to the pairwise KEY table.
1295 * 0~3 to shared KEY table 0 (BSS0).
1296 * 4~7 to shared KEY table 1 (BSS1).
1297 * 8~11 to shared KEY table 2 (BSS2).
1298 * 12~15 to shared KEY table 3 (BSS3).
1299 * BURST: Next frame belongs to same "burst" event.
1301 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1302 #define TXD_W0_VALID FIELD32(0x00000002)
1303 #define TXD_W0_MORE_FRAG FIELD32(0x00000004)
1304 #define TXD_W0_ACK FIELD32(0x00000008)
1305 #define TXD_W0_TIMESTAMP FIELD32(0x00000010)
1306 #define TXD_W0_OFDM FIELD32(0x00000020)
1307 #define TXD_W0_IFS FIELD32(0x00000040)
1308 #define TXD_W0_RETRY_MODE FIELD32(0x00000080)
1309 #define TXD_W0_TKIP_MIC FIELD32(0x00000100)
1310 #define TXD_W0_KEY_TABLE FIELD32(0x00000200)
1311 #define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1312 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1313 #define TXD_W0_BURST FIELD32(0x10000000)
1314 #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1318 * HOST_Q_ID: EDCA/HCCA queue ID.
1319 * HW_SEQUENCE: MAC overwrites the frame sequence number.
1320 * BUFFER_COUNT: Number of buffers in this TXD.
1322 #define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
1323 #define TXD_W1_AIFSN FIELD32(0x000000f0)
1324 #define TXD_W1_CWMIN FIELD32(0x00000f00)
1325 #define TXD_W1_CWMAX FIELD32(0x0000f000)
1326 #define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
1327 #define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
1328 #define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
1329 #define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
1332 * Word2: PLCP information
1334 #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
1335 #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
1336 #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1337 #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1342 #define TXD_W3_IV FIELD32(0xffffffff)
1347 #define TXD_W4_EIV FIELD32(0xffffffff)
1351 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
1352 * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
1353 * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
1354 * WAITING_DMA_DONE_INT: TXD been filled with data
1355 * and waiting for TxDoneISR housekeeping.
1357 #define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
1358 #define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
1359 #define TXD_W5_PID_TYPE FIELD32(0x0000e000)
1360 #define TXD_W5_TX_POWER FIELD32(0x00ff0000)
1361 #define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
1364 * the above 24-byte is called TXINFO and will be DMAed to MAC block
1365 * through TXFIFO. MAC block use this TXINFO to control the transmission
1366 * behavior of this frame.
1367 * The following fields are not used by MAC block.
1368 * They are used by DMA block and HOST driver only.
1369 * Once a frame has been DMA to ASIC, all the following fields are useless
1374 * Word6-10: Buffer physical address
1376 #define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1377 #define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1378 #define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1379 #define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1380 #define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1383 * Word11-13: Buffer length
1385 #define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
1386 #define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
1387 #define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
1388 #define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
1389 #define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
1394 #define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
1399 #define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
1402 * RX descriptor format for RX Ring.
1407 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
1408 * KEY_INDEX: Decryption key actually used.
1410 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1411 #define RXD_W0_DROP FIELD32(0x00000002)
1412 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
1413 #define RXD_W0_MULTICAST FIELD32(0x00000008)
1414 #define RXD_W0_BROADCAST FIELD32(0x00000010)
1415 #define RXD_W0_MY_BSS FIELD32(0x00000020)
1416 #define RXD_W0_CRC_ERROR FIELD32(0x00000040)
1417 #define RXD_W0_OFDM FIELD32(0x00000080)
1418 #define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
1419 #define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1420 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1421 #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1425 * SIGNAL: RX raw data rate reported by BBP.
1427 #define RXD_W1_SIGNAL FIELD32(0x000000ff)
1428 #define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
1429 #define RXD_W1_RSSI_LNA FIELD32(0x00006000)
1430 #define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
1434 * IV: Received IV of originally encrypted.
1436 #define RXD_W2_IV FIELD32(0xffffffff)
1440 * EIV: Received EIV of originally encrypted.
1442 #define RXD_W3_EIV FIELD32(0xffffffff)
1446 * ICV: Received ICV of originally encrypted.
1447 * NOTE: This is a guess, the official definition is "reserved"
1449 #define RXD_W4_ICV FIELD32(0xffffffff)
1452 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
1453 * and passed to the HOST driver.
1454 * The following fields are for DMA block and HOST usage only.
1455 * Can't be touched by ASIC MAC block.
1461 #define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1464 * Word6-15: Reserved
1466 #define RXD_W6_RESERVED FIELD32(0xffffffff)
1467 #define RXD_W7_RESERVED FIELD32(0xffffffff)
1468 #define RXD_W8_RESERVED FIELD32(0xffffffff)
1469 #define RXD_W9_RESERVED FIELD32(0xffffffff)
1470 #define RXD_W10_RESERVED FIELD32(0xffffffff)
1471 #define RXD_W11_RESERVED FIELD32(0xffffffff)
1472 #define RXD_W12_RESERVED FIELD32(0xffffffff)
1473 #define RXD_W13_RESERVED FIELD32(0xffffffff)
1474 #define RXD_W14_RESERVED FIELD32(0xffffffff)
1475 #define RXD_W15_RESERVED FIELD32(0xffffffff)
1478 * Macro's for converting txpower from EEPROM to mac80211 value
1479 * and from mac80211 value to register value.
1481 #define MIN_TXPOWER 0
1482 #define MAX_TXPOWER 31
1483 #define DEFAULT_TXPOWER 24
1485 #define TXPOWER_FROM_DEV(__txpower) \
1486 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
1488 #define TXPOWER_TO_DEV(__txpower) \
1489 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
1491 #endif /* RT61PCI_H */