git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/iwlwifi/iwl-core.c

   1 /******************************************************************************
   2  *
   3  * GPL LICENSE SUMMARY
   4  *
   5  * Copyright(c) 2008 Intel Corporation. All rights reserved.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of version 2 of the GNU General Public License as
   9  * published by the Free Software Foundation.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  19  * USA
  20  *
  21  * The full GNU General Public License is included in this distribution
  22  * in the file called LICENSE.GPL.
  23  *
  24  * Contact Information:
  25  * Tomas Winkler <tomas.winkler@intel.com>
  26  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  27  *****************************************************************************/
  28
  29 #include <linux/kernel.h>
  30 #include <linux/module.h>
  31 #include <linux/version.h>
  32 #include <net/mac80211.h>
  33
  34 struct iwl_priv; /* FIXME: remove */
  35 #include "iwl-debug.h"
  36 #include "iwl-eeprom.h"
  37 #include "iwl-dev.h" /* FIXME: remove */
  38 #include "iwl-core.h"
  39 #include "iwl-io.h"
  40 #include "iwl-rfkill.h"
  41 #include "iwl-power.h"
  42
  43
  44 MODULE_DESCRIPTION("iwl core");
  45 MODULE_VERSION(IWLWIFI_VERSION);
  46 MODULE_AUTHOR(DRV_COPYRIGHT);
  47 MODULE_LICENSE("GPL");
  48
  49 #define IWL_DECLARE_RATE_INFO(r, s, ip, in, rp, rn, pp, np)    \
  50         [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP,      \
  51                                     IWL_RATE_SISO_##s##M_PLCP, \
  52                                     IWL_RATE_MIMO2_##s##M_PLCP,\
  53                                     IWL_RATE_MIMO3_##s##M_PLCP,\
  54                                     IWL_RATE_##r##M_IEEE,      \
  55                                     IWL_RATE_##ip##M_INDEX,    \
  56                                     IWL_RATE_##in##M_INDEX,    \
  57                                     IWL_RATE_##rp##M_INDEX,    \
  58                                     IWL_RATE_##rn##M_INDEX,    \
  59                                     IWL_RATE_##pp##M_INDEX,    \
  60                                     IWL_RATE_##np##M_INDEX }
  61
  62 /*
  63  * Parameter order:
  64  *   rate, ht rate, prev rate, next rate, prev tgg rate, next tgg rate
  65  *
  66  * If there isn't a valid next or previous rate then INV is used which
  67  * maps to IWL_RATE_INVALID
  68  *
  69  */
  70 const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = {
  71         IWL_DECLARE_RATE_INFO(1, INV, INV, 2, INV, 2, INV, 2),    /*  1mbps */
  72         IWL_DECLARE_RATE_INFO(2, INV, 1, 5, 1, 5, 1, 5),          /*  2mbps */
  73         IWL_DECLARE_RATE_INFO(5, INV, 2, 6, 2, 11, 2, 11),        /*5.5mbps */
  74         IWL_DECLARE_RATE_INFO(11, INV, 9, 12, 9, 12, 5, 18),      /* 11mbps */
  75         IWL_DECLARE_RATE_INFO(6, 6, 5, 9, 5, 11, 5, 11),        /*  6mbps */
  76         IWL_DECLARE_RATE_INFO(9, 6, 6, 11, 6, 11, 5, 11),       /*  9mbps */
  77         IWL_DECLARE_RATE_INFO(12, 12, 11, 18, 11, 18, 11, 18),   /* 12mbps */
  78         IWL_DECLARE_RATE_INFO(18, 18, 12, 24, 12, 24, 11, 24),   /* 18mbps */
  79         IWL_DECLARE_RATE_INFO(24, 24, 18, 36, 18, 36, 18, 36),   /* 24mbps */
  80         IWL_DECLARE_RATE_INFO(36, 36, 24, 48, 24, 48, 24, 48),   /* 36mbps */
  81         IWL_DECLARE_RATE_INFO(48, 48, 36, 54, 36, 54, 36, 54),   /* 48mbps */
  82         IWL_DECLARE_RATE_INFO(54, 54, 48, INV, 48, INV, 48, INV),/* 54mbps */
  83         IWL_DECLARE_RATE_INFO(60, 60, 48, INV, 48, INV, 48, INV),/* 60mbps */
  84         /* FIXME:RS:          ^^    should be INV (legacy) */
  85 };
  86 EXPORT_SYMBOL(iwl_rates);
  87
  88 /**
  89  * translate ucode response to mac80211 tx status control values
  90  */
  91 void iwl_hwrate_to_tx_control(struct iwl_priv *priv, u32 rate_n_flags,
  92                                   struct ieee80211_tx_info *control)
  93 {
  94         int rate_index;
  95
  96         control->antenna_sel_tx =
  97                 ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
  98         if (rate_n_flags & RATE_MCS_HT_MSK)
  99                 control->flags |= IEEE80211_TX_CTL_OFDM_HT;
 100         if (rate_n_flags & RATE_MCS_GF_MSK)
 101                 control->flags |= IEEE80211_TX_CTL_GREEN_FIELD;
 102         if (rate_n_flags & RATE_MCS_FAT_MSK)
 103                 control->flags |= IEEE80211_TX_CTL_40_MHZ_WIDTH;
 104         if (rate_n_flags & RATE_MCS_DUP_MSK)
 105                 control->flags |= IEEE80211_TX_CTL_DUP_DATA;
 106         if (rate_n_flags & RATE_MCS_SGI_MSK)
 107                 control->flags |= IEEE80211_TX_CTL_SHORT_GI;
 108         rate_index = iwl_hwrate_to_plcp_idx(rate_n_flags);
 109         if (control->band == IEEE80211_BAND_5GHZ)
 110                 rate_index -= IWL_FIRST_OFDM_RATE;
 111         control->tx_rate_idx = rate_index;
 112 }
 113 EXPORT_SYMBOL(iwl_hwrate_to_tx_control);
 114
 115 int iwl_hwrate_to_plcp_idx(u32 rate_n_flags)
 116 {
 117         int idx = 0;
 118
 119         /* HT rate format */
 120         if (rate_n_flags & RATE_MCS_HT_MSK) {
 121                 idx = (rate_n_flags & 0xff);
 122
 123                 if (idx >= IWL_RATE_MIMO2_6M_PLCP)
 124                         idx = idx - IWL_RATE_MIMO2_6M_PLCP;
 125
 126                 idx += IWL_FIRST_OFDM_RATE;
 127                 /* skip 9M not supported in ht*/
 128                 if (idx >= IWL_RATE_9M_INDEX)
 129                         idx += 1;
 130                 if ((idx >= IWL_FIRST_OFDM_RATE) && (idx <= IWL_LAST_OFDM_RATE))
 131                         return idx;
 132
 133         /* legacy rate format, search for match in table */
 134         } else {
 135                 for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++)
 136                         if (iwl_rates[idx].plcp == (rate_n_flags & 0xFF))
 137                                 return idx;
 138         }
 139
 140         return -1;
 141 }
 142 EXPORT_SYMBOL(iwl_hwrate_to_plcp_idx);
 143
 144
 145
 146 const u8 iwl_bcast_addr[ETH_ALEN] = { 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF };
 147 EXPORT_SYMBOL(iwl_bcast_addr);
 148
 149
 150 /* This function both allocates and initializes hw and priv. */
 151 struct ieee80211_hw *iwl_alloc_all(struct iwl_cfg *cfg,
 152                 struct ieee80211_ops *hw_ops)
 153 {
 154         struct iwl_priv *priv;
 155
 156         /* mac80211 allocates memory for this device instance, including
 157          *   space for this driver's private structure */
 158         struct ieee80211_hw *hw =
 159                 ieee80211_alloc_hw(sizeof(struct iwl_priv), hw_ops);
 160         if (hw == NULL) {
 161                 IWL_ERROR("Can not allocate network device\n");
 162                 goto out;
 163         }
 164
 165         priv = hw->priv;
 166         priv->hw = hw;
 167
 168 out:
 169         return hw;
 170 }
 171 EXPORT_SYMBOL(iwl_alloc_all);
 172
 173 void iwl_hw_detect(struct iwl_priv *priv)
 174 {
 175         priv->hw_rev = _iwl_read32(priv, CSR_HW_REV);
 176         priv->hw_wa_rev = _iwl_read32(priv, CSR_HW_REV_WA_REG);
 177         pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &priv->rev_id);
 178 }
 179 EXPORT_SYMBOL(iwl_hw_detect);
 180
 181 /* Tell nic where to find the "keep warm" buffer */
 182 int iwl_kw_init(struct iwl_priv *priv)
 183 {
 184         unsigned long flags;
 185         int ret;
 186
 187         spin_lock_irqsave(&priv->lock, flags);
 188         ret = iwl_grab_nic_access(priv);
 189         if (ret)
 190                 goto out;
 191
 192         iwl_write_direct32(priv, FH_KW_MEM_ADDR_REG,
 193                              priv->kw.dma_addr >> 4);
 194         iwl_release_nic_access(priv);
 195 out:
 196         spin_unlock_irqrestore(&priv->lock, flags);
 197         return ret;
 198 }
 199
 200 int iwl_kw_alloc(struct iwl_priv *priv)
 201 {
 202         struct pci_dev *dev = priv->pci_dev;
 203         struct iwl_kw *kw = &priv->kw;
 204
 205         kw->size = IWL_KW_SIZE;
 206         kw->v_addr = pci_alloc_consistent(dev, kw->size, &kw->dma_addr);
 207         if (!kw->v_addr)
 208                 return -ENOMEM;
 209
 210         return 0;
 211 }
 212
 213 /**
 214  * iwl_kw_free - Free the "keep warm" buffer
 215  */
 216 void iwl_kw_free(struct iwl_priv *priv)
 217 {
 218         struct pci_dev *dev = priv->pci_dev;
 219         struct iwl_kw *kw = &priv->kw;
 220
 221         if (kw->v_addr) {
 222                 pci_free_consistent(dev, kw->size, kw->v_addr, kw->dma_addr);
 223                 memset(kw, 0, sizeof(*kw));
 224         }
 225 }
 226
 227 int iwl_hw_nic_init(struct iwl_priv *priv)
 228 {
 229         unsigned long flags;
 230         struct iwl_rx_queue *rxq = &priv->rxq;
 231         int ret;
 232
 233         /* nic_init */
 234         spin_lock_irqsave(&priv->lock, flags);
 235         priv->cfg->ops->lib->apm_ops.init(priv);
 236         iwl_write32(priv, CSR_INT_COALESCING, 512 / 32);
 237         spin_unlock_irqrestore(&priv->lock, flags);
 238
 239         ret = priv->cfg->ops->lib->apm_ops.set_pwr_src(priv, IWL_PWR_SRC_VMAIN);
 240
 241         priv->cfg->ops->lib->apm_ops.config(priv);
 242
 243         /* Allocate the RX queue, or reset if it is already allocated */
 244         if (!rxq->bd) {
 245                 ret = iwl_rx_queue_alloc(priv);
 246                 if (ret) {
 247                         IWL_ERROR("Unable to initialize Rx queue\n");
 248                         return -ENOMEM;
 249                 }
 250         } else
 251                 iwl_rx_queue_reset(priv, rxq);
 252
 253         iwl_rx_replenish(priv);
 254
 255         iwl_rx_init(priv, rxq);
 256
 257         spin_lock_irqsave(&priv->lock, flags);
 258
 259         rxq->need_update = 1;
 260         iwl_rx_queue_update_write_ptr(priv, rxq);
 261
 262         spin_unlock_irqrestore(&priv->lock, flags);
 263
 264         /* Allocate and init all Tx and Command queues */
 265         ret = iwl_txq_ctx_reset(priv);
 266         if (ret)
 267                 return ret;
 268
 269         set_bit(STATUS_INIT, &priv->status);
 270
 271         return 0;
 272 }
 273 EXPORT_SYMBOL(iwl_hw_nic_init);
 274
 275 /**
 276  * iwl_clear_stations_table - Clear the driver's station table
 277  *
 278  * NOTE:  This does not clear or otherwise alter the device's station table.
 279  */
 280 void iwl_clear_stations_table(struct iwl_priv *priv)
 281 {
 282         unsigned long flags;
 283
 284         spin_lock_irqsave(&priv->sta_lock, flags);
 285
 286         if (iwl_is_alive(priv) &&
 287            !test_bit(STATUS_EXIT_PENDING, &priv->status) &&
 288            iwl_send_cmd_pdu_async(priv, REPLY_REMOVE_ALL_STA, 0, NULL, NULL))
 289                 IWL_ERROR("Couldn't clear the station table\n");
 290
 291         priv->num_stations = 0;
 292         memset(priv->stations, 0, sizeof(priv->stations));
 293
 294         spin_unlock_irqrestore(&priv->sta_lock, flags);
 295 }
 296 EXPORT_SYMBOL(iwl_clear_stations_table);
 297
 298 void iwl_reset_qos(struct iwl_priv *priv)
 299 {
 300         u16 cw_min = 15;
 301         u16 cw_max = 1023;
 302         u8 aifs = 2;
 303         u8 is_legacy = 0;
 304         unsigned long flags;
 305         int i;
 306
 307         spin_lock_irqsave(&priv->lock, flags);
 308         priv->qos_data.qos_active = 0;
 309
 310         if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) {
 311                 if (priv->qos_data.qos_enable)
 312                         priv->qos_data.qos_active = 1;
 313                 if (!(priv->active_rate & 0xfff0)) {
 314                         cw_min = 31;
 315                         is_legacy = 1;
 316                 }
 317         } else if (priv->iw_mode == IEEE80211_IF_TYPE_AP) {
 318                 if (priv->qos_data.qos_enable)
 319                         priv->qos_data.qos_active = 1;
 320         } else if (!(priv->staging_rxon.flags & RXON_FLG_SHORT_SLOT_MSK)) {
 321                 cw_min = 31;
 322                 is_legacy = 1;
 323         }
 324
 325         if (priv->qos_data.qos_active)
 326                 aifs = 3;
 327
 328         priv->qos_data.def_qos_parm.ac[0].cw_min = cpu_to_le16(cw_min);
 329         priv->qos_data.def_qos_parm.ac[0].cw_max = cpu_to_le16(cw_max);
 330         priv->qos_data.def_qos_parm.ac[0].aifsn = aifs;
 331         priv->qos_data.def_qos_parm.ac[0].edca_txop = 0;
 332         priv->qos_data.def_qos_parm.ac[0].reserved1 = 0;
 333
 334         if (priv->qos_data.qos_active) {
 335                 i = 1;
 336                 priv->qos_data.def_qos_parm.ac[i].cw_min = cpu_to_le16(cw_min);
 337                 priv->qos_data.def_qos_parm.ac[i].cw_max = cpu_to_le16(cw_max);
 338                 priv->qos_data.def_qos_parm.ac[i].aifsn = 7;
 339                 priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
 340                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 341
 342                 i = 2;
 343                 priv->qos_data.def_qos_parm.ac[i].cw_min =
 344                         cpu_to_le16((cw_min + 1) / 2 - 1);
 345                 priv->qos_data.def_qos_parm.ac[i].cw_max =
 346                         cpu_to_le16(cw_max);
 347                 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 348                 if (is_legacy)
 349                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
 350                                 cpu_to_le16(6016);
 351                 else
 352                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
 353                                 cpu_to_le16(3008);
 354                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 355
 356                 i = 3;
 357                 priv->qos_data.def_qos_parm.ac[i].cw_min =
 358                         cpu_to_le16((cw_min + 1) / 4 - 1);
 359                 priv->qos_data.def_qos_parm.ac[i].cw_max =
 360                         cpu_to_le16((cw_max + 1) / 2 - 1);
 361                 priv->qos_data.def_qos_parm.ac[i].aifsn = 2;
 362                 priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 363                 if (is_legacy)
 364                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
 365                                 cpu_to_le16(3264);
 366                 else
 367                         priv->qos_data.def_qos_parm.ac[i].edca_txop =
 368                                 cpu_to_le16(1504);
 369         } else {
 370                 for (i = 1; i < 4; i++) {
 371                         priv->qos_data.def_qos_parm.ac[i].cw_min =
 372                                 cpu_to_le16(cw_min);
 373                         priv->qos_data.def_qos_parm.ac[i].cw_max =
 374                                 cpu_to_le16(cw_max);
 375                         priv->qos_data.def_qos_parm.ac[i].aifsn = aifs;
 376                         priv->qos_data.def_qos_parm.ac[i].edca_txop = 0;
 377                         priv->qos_data.def_qos_parm.ac[i].reserved1 = 0;
 378                 }
 379         }
 380         IWL_DEBUG_QOS("set QoS to default \n");
 381
 382         spin_unlock_irqrestore(&priv->lock, flags);
 383 }
 384 EXPORT_SYMBOL(iwl_reset_qos);
 385
 386 #define MAX_BIT_RATE_40_MHZ 0x96; /* 150 Mbps */
 387 #define MAX_BIT_RATE_20_MHZ 0x48; /* 72 Mbps */
 388 static void iwlcore_init_ht_hw_capab(const struct iwl_priv *priv,
 389                               struct ieee80211_ht_info *ht_info,
 390                               enum ieee80211_band band)
 391 {
 392         u16 max_bit_rate = 0;
 393         u8 rx_chains_num = priv->hw_params.rx_chains_num;
 394         u8 tx_chains_num = priv->hw_params.tx_chains_num;
 395
 396         ht_info->cap = 0;
 397         memset(ht_info->supp_mcs_set, 0, 16);
 398
 399         ht_info->ht_supported = 1;
 400
 401         ht_info->cap |= (u16)IEEE80211_HT_CAP_GRN_FLD;
 402         ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_20;
 403         ht_info->cap |= (u16)(IEEE80211_HT_CAP_MIMO_PS &
 404                              (IWL_MIMO_PS_NONE << 2));
 405
 406         max_bit_rate = MAX_BIT_RATE_20_MHZ;
 407         if (priv->hw_params.fat_channel & BIT(band)) {
 408                 ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
 409                 ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
 410                 ht_info->supp_mcs_set[4] = 0x01;
 411                 max_bit_rate = MAX_BIT_RATE_40_MHZ;
 412         }
 413
 414         if (priv->cfg->mod_params->amsdu_size_8K)
 415                 ht_info->cap |= (u16)IEEE80211_HT_CAP_MAX_AMSDU;
 416
 417         ht_info->ampdu_factor = CFG_HT_RX_AMPDU_FACTOR_DEF;
 418         ht_info->ampdu_density = CFG_HT_MPDU_DENSITY_DEF;
 419
 420         ht_info->supp_mcs_set[0] = 0xFF;
 421         if (rx_chains_num >= 2)
 422                 ht_info->supp_mcs_set[1] = 0xFF;
 423         if (rx_chains_num >= 3)
 424                 ht_info->supp_mcs_set[2] = 0xFF;
 425
 426         /* Highest supported Rx data rate */
 427         max_bit_rate *= rx_chains_num;
 428         ht_info->supp_mcs_set[10] = (u8)(max_bit_rate & 0x00FF);
 429         ht_info->supp_mcs_set[11] = (u8)((max_bit_rate & 0xFF00) >> 8);
 430
 431         /* Tx MCS capabilities */
 432         ht_info->supp_mcs_set[12] = IEEE80211_HT_CAP_MCS_TX_DEFINED;
 433         if (tx_chains_num != rx_chains_num) {
 434                 ht_info->supp_mcs_set[12] |= IEEE80211_HT_CAP_MCS_TX_RX_DIFF;
 435                 ht_info->supp_mcs_set[12] |= ((tx_chains_num - 1) << 2);
 436         }
 437 }
 438
 439 static void iwlcore_init_hw_rates(struct iwl_priv *priv,
 440                               struct ieee80211_rate *rates)
 441 {
 442         int i;
 443
 444         for (i = 0; i < IWL_RATE_COUNT; i++) {
 445                 rates[i].bitrate = iwl_rates[i].ieee * 5;
 446                 rates[i].hw_value = i; /* Rate scaling will work on indexes */
 447                 rates[i].hw_value_short = i;
 448                 rates[i].flags = 0;
 449                 if ((i > IWL_LAST_OFDM_RATE) || (i < IWL_FIRST_OFDM_RATE)) {
 450                         /*
 451                          * If CCK != 1M then set short preamble rate flag.
 452                          */
 453                         rates[i].flags |=
 454                                 (iwl_rates[i].plcp == IWL_RATE_1M_PLCP) ?
 455                                         0 : IEEE80211_RATE_SHORT_PREAMBLE;
 456                 }
 457         }
 458 }
 459
 460 /**
 461  * iwlcore_init_geos - Initialize mac80211's geo/channel info based from eeprom
 462  */
 463 static int iwlcore_init_geos(struct iwl_priv *priv)
 464 {
 465         struct iwl_channel_info *ch;
 466         struct ieee80211_supported_band *sband;
 467         struct ieee80211_channel *channels;
 468         struct ieee80211_channel *geo_ch;
 469         struct ieee80211_rate *rates;
 470         int i = 0;
 471
 472         if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
 473             priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
 474                 IWL_DEBUG_INFO("Geography modes already initialized.\n");
 475                 set_bit(STATUS_GEO_CONFIGURED, &priv->status);
 476                 return 0;
 477         }
 478
 479         channels = kzalloc(sizeof(struct ieee80211_channel) *
 480                            priv->channel_count, GFP_KERNEL);
 481         if (!channels)
 482                 return -ENOMEM;
 483
 484         rates = kzalloc((sizeof(struct ieee80211_rate) * (IWL_RATE_COUNT + 1)),
 485                         GFP_KERNEL);
 486         if (!rates) {
 487                 kfree(channels);
 488                 return -ENOMEM;
 489         }
 490
 491         /* 5.2GHz channels start after the 2.4GHz channels */
 492         sband = &priv->bands[IEEE80211_BAND_5GHZ];
 493         sband->channels = &channels[ARRAY_SIZE(iwl_eeprom_band_1)];
 494         /* just OFDM */
 495         sband->bitrates = &rates[IWL_FIRST_OFDM_RATE];
 496         sband->n_bitrates = IWL_RATE_COUNT - IWL_FIRST_OFDM_RATE;
 497
 498         if (priv->cfg->sku & IWL_SKU_N)
 499                 iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
 500                                          IEEE80211_BAND_5GHZ);
 501
 502         sband = &priv->bands[IEEE80211_BAND_2GHZ];
 503         sband->channels = channels;
 504         /* OFDM & CCK */
 505         sband->bitrates = rates;
 506         sband->n_bitrates = IWL_RATE_COUNT;
 507
 508         if (priv->cfg->sku & IWL_SKU_N)
 509                 iwlcore_init_ht_hw_capab(priv, &sband->ht_info,
 510                                          IEEE80211_BAND_2GHZ);
 511
 512         priv->ieee_channels = channels;
 513         priv->ieee_rates = rates;
 514
 515         iwlcore_init_hw_rates(priv, rates);
 516
 517         for (i = 0;  i < priv->channel_count; i++) {
 518                 ch = &priv->channel_info[i];
 519
 520                 /* FIXME: might be removed if scan is OK */
 521                 if (!is_channel_valid(ch))
 522                         continue;
 523
 524                 if (is_channel_a_band(ch))
 525                         sband =  &priv->bands[IEEE80211_BAND_5GHZ];
 526                 else
 527                         sband =  &priv->bands[IEEE80211_BAND_2GHZ];
 528
 529                 geo_ch = &sband->channels[sband->n_channels++];
 530
 531                 geo_ch->center_freq =
 532                                 ieee80211_channel_to_frequency(ch->channel);
 533                 geo_ch->max_power = ch->max_power_avg;
 534                 geo_ch->max_antenna_gain = 0xff;
 535                 geo_ch->hw_value = ch->channel;
 536
 537                 if (is_channel_valid(ch)) {
 538                         if (!(ch->flags & EEPROM_CHANNEL_IBSS))
 539                                 geo_ch->flags |= IEEE80211_CHAN_NO_IBSS;
 540
 541                         if (!(ch->flags & EEPROM_CHANNEL_ACTIVE))
 542                                 geo_ch->flags |= IEEE80211_CHAN_PASSIVE_SCAN;
 543
 544                         if (ch->flags & EEPROM_CHANNEL_RADAR)
 545                                 geo_ch->flags |= IEEE80211_CHAN_RADAR;
 546
 547                         geo_ch->flags |= ch->fat_extension_channel;
 548
 549                         if (ch->max_power_avg > priv->tx_power_channel_lmt)
 550                                 priv->tx_power_channel_lmt = ch->max_power_avg;
 551                 } else {
 552                         geo_ch->flags |= IEEE80211_CHAN_DISABLED;
 553                 }
 554
 555                 /* Save flags for reg domain usage */
 556                 geo_ch->orig_flags = geo_ch->flags;
 557
 558                 IWL_DEBUG_INFO("Channel %d Freq=%d[%sGHz] %s flag=0x%X\n",
 559                                 ch->channel, geo_ch->center_freq,
 560                                 is_channel_a_band(ch) ?  "5.2" : "2.4",
 561                                 geo_ch->flags & IEEE80211_CHAN_DISABLED ?
 562                                 "restricted" : "valid",
 563                                  geo_ch->flags);
 564         }
 565
 566         if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
 567              priv->cfg->sku & IWL_SKU_A) {
 568                 printk(KERN_INFO DRV_NAME
 569                        ": Incorrectly detected BG card as ABG.  Please send "
 570                        "your PCI ID 0x%04X:0x%04X to maintainer.\n",
 571                        priv->pci_dev->device, priv->pci_dev->subsystem_device);
 572                 priv->cfg->sku &= ~IWL_SKU_A;
 573         }
 574
 575         printk(KERN_INFO DRV_NAME
 576                ": Tunable channels: %d 802.11bg, %d 802.11a channels\n",
 577                priv->bands[IEEE80211_BAND_2GHZ].n_channels,
 578                priv->bands[IEEE80211_BAND_5GHZ].n_channels);
 579
 580
 581         set_bit(STATUS_GEO_CONFIGURED, &priv->status);
 582
 583         return 0;
 584 }
 585
 586 /*
 587  * iwlcore_free_geos - undo allocations in iwlcore_init_geos
 588  */
 589 static void iwlcore_free_geos(struct iwl_priv *priv)
 590 {
 591         kfree(priv->ieee_channels);
 592         kfree(priv->ieee_rates);
 593         clear_bit(STATUS_GEO_CONFIGURED, &priv->status);
 594 }
 595
 596 static u8 is_single_rx_stream(struct iwl_priv *priv)
 597 {
 598         return !priv->current_ht_config.is_ht ||
 599                ((priv->current_ht_config.supp_mcs_set[1] == 0) &&
 600                 (priv->current_ht_config.supp_mcs_set[2] == 0)) ||
 601                priv->ps_mode == IWL_MIMO_PS_STATIC;
 602 }
 603
 604 static u8 iwl_is_channel_extension(struct iwl_priv *priv,
 605                                    enum ieee80211_band band,
 606                                    u16 channel, u8 extension_chan_offset)
 607 {
 608         const struct iwl_channel_info *ch_info;
 609
 610         ch_info = iwl_get_channel_info(priv, band, channel);
 611         if (!is_channel_valid(ch_info))
 612                 return 0;
 613
 614         if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_ABOVE)
 615                 return !(ch_info->fat_extension_channel &
 616                                         IEEE80211_CHAN_NO_FAT_ABOVE);
 617         else if (extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_BELOW)
 618                 return !(ch_info->fat_extension_channel &
 619                                         IEEE80211_CHAN_NO_FAT_BELOW);
 620
 621         return 0;
 622 }
 623
 624 u8 iwl_is_fat_tx_allowed(struct iwl_priv *priv,
 625                              struct ieee80211_ht_info *sta_ht_inf)
 626 {
 627         struct iwl_ht_info *iwl_ht_conf = &priv->current_ht_config;
 628
 629         if ((!iwl_ht_conf->is_ht) ||
 630            (iwl_ht_conf->supported_chan_width != IWL_CHANNEL_WIDTH_40MHZ) ||
 631            (iwl_ht_conf->extension_chan_offset == IEEE80211_HT_IE_CHA_SEC_NONE))
 632                 return 0;
 633
 634         if (sta_ht_inf) {
 635                 if ((!sta_ht_inf->ht_supported) ||
 636                    (!(sta_ht_inf->cap & IEEE80211_HT_CAP_SUP_WIDTH)))
 637                         return 0;
 638         }
 639
 640         return iwl_is_channel_extension(priv, priv->band,
 641                                          iwl_ht_conf->control_channel,
 642                                          iwl_ht_conf->extension_chan_offset);
 643 }
 644 EXPORT_SYMBOL(iwl_is_fat_tx_allowed);
 645
 646 void iwl_set_rxon_ht(struct iwl_priv *priv, struct iwl_ht_info *ht_info)
 647 {
 648         struct iwl_rxon_cmd *rxon = &priv->staging_rxon;
 649         u32 val;
 650
 651         if (!ht_info->is_ht)
 652                 return;
 653
 654         /* Set up channel bandwidth:  20 MHz only, or 20/40 mixed if fat ok */
 655         if (iwl_is_fat_tx_allowed(priv, NULL))
 656                 rxon->flags |= RXON_FLG_CHANNEL_MODE_MIXED_MSK;
 657         else
 658                 rxon->flags &= ~(RXON_FLG_CHANNEL_MODE_MIXED_MSK |
 659                                  RXON_FLG_CHANNEL_MODE_PURE_40_MSK);
 660
 661         if (le16_to_cpu(rxon->channel) != ht_info->control_channel) {
 662                 IWL_DEBUG_ASSOC("control diff than current %d %d\n",
 663                                 le16_to_cpu(rxon->channel),
 664                                 ht_info->control_channel);
 665                 return;
 666         }
 667
 668         /* Note: control channel is opposite of extension channel */
 669         switch (ht_info->extension_chan_offset) {
 670         case IEEE80211_HT_IE_CHA_SEC_ABOVE:
 671                 rxon->flags &= ~(RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK);
 672                 break;
 673         case IEEE80211_HT_IE_CHA_SEC_BELOW:
 674                 rxon->flags |= RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK;
 675                 break;
 676         case IEEE80211_HT_IE_CHA_SEC_NONE:
 677         default:
 678                 rxon->flags &= ~RXON_FLG_CHANNEL_MODE_MIXED_MSK;
 679                 break;
 680         }
 681
 682         val = ht_info->ht_protection;
 683
 684         rxon->flags |= cpu_to_le32(val << RXON_FLG_HT_OPERATING_MODE_POS);
 685
 686         iwl_set_rxon_chain(priv);
 687
 688         IWL_DEBUG_ASSOC("supported HT rate 0x%X 0x%X 0x%X "
 689                         "rxon flags 0x%X operation mode :0x%X "
 690                         "extension channel offset 0x%x "
 691                         "control chan %d\n",
 692                         ht_info->supp_mcs_set[0],
 693                         ht_info->supp_mcs_set[1],
 694                         ht_info->supp_mcs_set[2],
 695                         le32_to_cpu(rxon->flags), ht_info->ht_protection,
 696                         ht_info->extension_chan_offset,
 697                         ht_info->control_channel);
 698         return;
 699 }
 700 EXPORT_SYMBOL(iwl_set_rxon_ht);
 701
 702 /*
 703  * Determine how many receiver/antenna chains to use.
 704  * More provides better reception via diversity.  Fewer saves power.
 705  * MIMO (dual stream) requires at least 2, but works better with 3.
 706  * This does not determine *which* chains to use, just how many.
 707  */
 708 static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv,
 709                                         u8 *idle_state, u8 *rx_state)
 710 {
 711         u8 is_single = is_single_rx_stream(priv);
 712         u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1;
 713
 714         /* # of Rx chains to use when expecting MIMO. */
 715         if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC)))
 716                 *rx_state = 2;
 717         else
 718                 *rx_state = 3;
 719
 720         /* # Rx chains when idling and maybe trying to save power */
 721         switch (priv->ps_mode) {
 722         case IWL_MIMO_PS_STATIC:
 723         case IWL_MIMO_PS_DYNAMIC:
 724                 *idle_state = (is_cam) ? 2 : 1;
 725                 break;
 726         case IWL_MIMO_PS_NONE:
 727                 *idle_state = (is_cam) ? *rx_state : 1;
 728                 break;
 729         default:
 730                 *idle_state = 1;
 731                 break;
 732         }
 733
 734         return 0;
 735 }
 736
 737 /**
 738  * iwl_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
 739  *
 740  * Selects how many and which Rx receivers/antennas/chains to use.
 741  * This should not be used for scan command ... it puts data in wrong place.
 742  */
 743 void iwl_set_rxon_chain(struct iwl_priv *priv)
 744 {
 745         u8 is_single = is_single_rx_stream(priv);
 746         u8 idle_state, rx_state;
 747
 748         priv->staging_rxon.rx_chain = 0;
 749         rx_state = idle_state = 3;
 750
 751         /* Tell uCode which antennas are actually connected.
 752          * Before first association, we assume all antennas are connected.
 753          * Just after first association, iwl_chain_noise_calibration()
 754          *    checks which antennas actually *are* connected. */
 755         priv->staging_rxon.rx_chain |=
 756                     cpu_to_le16(priv->hw_params.valid_rx_ant <<
 757                                                  RXON_RX_CHAIN_VALID_POS);
 758
 759         /* How many receivers should we use? */
 760         iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state);
 761         priv->staging_rxon.rx_chain |=
 762                 cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS);
 763         priv->staging_rxon.rx_chain |=
 764                 cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS);
 765
 766         if (!is_single && (rx_state >= 2) &&
 767             !test_bit(STATUS_POWER_PMI, &priv->status))
 768                 priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
 769         else
 770                 priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;
 771
 772         IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain);
 773 }
 774 EXPORT_SYMBOL(iwl_set_rxon_chain);
 775
 776 /**
 777  * iwlcore_set_rxon_channel - Set the phymode and channel values in staging RXON
 778  * @phymode: MODE_IEEE80211A sets to 5.2GHz; all else set to 2.4GHz
 779  * @channel: Any channel valid for the requested phymode
 780
 781  * In addition to setting the staging RXON, priv->phymode is also set.
 782  *
 783  * NOTE:  Does not commit to the hardware; it sets appropriate bit fields
 784  * in the staging RXON flag structure based on the phymode
 785  */
 786 int iwl_set_rxon_channel(struct iwl_priv *priv,
 787                                 enum ieee80211_band band,
 788                                 u16 channel)
 789 {
 790         if (!iwl_get_channel_info(priv, band, channel)) {
 791                 IWL_DEBUG_INFO("Could not set channel to %d [%d]\n",
 792                                channel, band);
 793                 return -EINVAL;
 794         }
 795
 796         if ((le16_to_cpu(priv->staging_rxon.channel) == channel) &&
 797             (priv->band == band))
 798                 return 0;
 799
 800         priv->staging_rxon.channel = cpu_to_le16(channel);
 801         if (band == IEEE80211_BAND_5GHZ)
 802                 priv->staging_rxon.flags &= ~RXON_FLG_BAND_24G_MSK;
 803         else
 804                 priv->staging_rxon.flags |= RXON_FLG_BAND_24G_MSK;
 805
 806         priv->band = band;
 807
 808         IWL_DEBUG_INFO("Staging channel set to %d [%d]\n", channel, band);
 809
 810         return 0;
 811 }
 812 EXPORT_SYMBOL(iwl_set_rxon_channel);
 813
 814 int iwl_setup_mac(struct iwl_priv *priv)
 815 {
 816         int ret;
 817         struct ieee80211_hw *hw = priv->hw;
 818         hw->rate_control_algorithm = "iwl-agn-rs";
 819
 820         /* Tell mac80211 our characteristics */
 821         hw->flags = IEEE80211_HW_SIGNAL_DBM |
 822                     IEEE80211_HW_NOISE_DBM;
 823         /* Default value; 4 EDCA QOS priorities */
 824         hw->queues = 4;
 825         /* queues to support 11n aggregation */
 826         if (priv->cfg->sku & IWL_SKU_N)
 827                 hw->ampdu_queues = priv->cfg->mod_params->num_of_ampdu_queues;
 828
 829         hw->conf.beacon_int = 100;
 830
 831         if (priv->bands[IEEE80211_BAND_2GHZ].n_channels)
 832                 priv->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
 833                         &priv->bands[IEEE80211_BAND_2GHZ];
 834         if (priv->bands[IEEE80211_BAND_5GHZ].n_channels)
 835                 priv->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
 836                         &priv->bands[IEEE80211_BAND_5GHZ];
 837
 838         ret = ieee80211_register_hw(priv->hw);
 839         if (ret) {
 840                 IWL_ERROR("Failed to register hw (error %d)\n", ret);
 841                 return ret;
 842         }
 843         priv->mac80211_registered = 1;
 844
 845         return 0;
 846 }
 847 EXPORT_SYMBOL(iwl_setup_mac);
 848
 849 int iwl_set_hw_params(struct iwl_priv *priv)
 850 {
 851         priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
 852         priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
 853         priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
 854         if (priv->cfg->mod_params->amsdu_size_8K)
 855                 priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_8K;
 856         else
 857                 priv->hw_params.rx_buf_size = IWL_RX_BUF_SIZE_4K;
 858         priv->hw_params.max_pkt_size = priv->hw_params.rx_buf_size - 256;
 859
 860         if (priv->cfg->mod_params->disable_11n)
 861                 priv->cfg->sku &= ~IWL_SKU_N;
 862
 863         /* Device-specific setup */
 864         return priv->cfg->ops->lib->set_hw_params(priv);
 865 }
 866 EXPORT_SYMBOL(iwl_set_hw_params);
 867
 868 int iwl_init_drv(struct iwl_priv *priv)
 869 {
 870         int ret;
 871
 872         priv->retry_rate = 1;
 873         priv->ibss_beacon = NULL;
 874
 875         spin_lock_init(&priv->lock);
 876         spin_lock_init(&priv->power_data.lock);
 877         spin_lock_init(&priv->sta_lock);
 878         spin_lock_init(&priv->hcmd_lock);
 879         spin_lock_init(&priv->lq_mngr.lock);
 880
 881         INIT_LIST_HEAD(&priv->free_frames);
 882
 883         mutex_init(&priv->mutex);
 884
 885         /* Clear the driver's (not device's) station table */
 886         iwl_clear_stations_table(priv);
 887
 888         priv->data_retry_limit = -1;
 889         priv->ieee_channels = NULL;
 890         priv->ieee_rates = NULL;
 891         priv->band = IEEE80211_BAND_2GHZ;
 892
 893         priv->iw_mode = IEEE80211_IF_TYPE_STA;
 894
 895         priv->use_ant_b_for_management_frame = 1; /* start with ant B */
 896         priv->ps_mode = IWL_MIMO_PS_NONE;
 897
 898         /* Choose which receivers/antennas to use */
 899         iwl_set_rxon_chain(priv);
 900         iwl_init_scan_params(priv);
 901
 902         if (priv->cfg->mod_params->enable_qos)
 903                 priv->qos_data.qos_enable = 1;
 904
 905         iwl_reset_qos(priv);
 906
 907         priv->qos_data.qos_active = 0;
 908         priv->qos_data.qos_cap.val = 0;
 909
 910         iwl_set_rxon_channel(priv, IEEE80211_BAND_2GHZ, 6);
 911
 912         priv->rates_mask = IWL_RATES_MASK;
 913         /* If power management is turned on, default to AC mode */
 914         priv->power_mode = IWL_POWER_AC;
 915         priv->tx_power_user_lmt = IWL_TX_POWER_TARGET_POWER_MAX;
 916
 917         ret = iwl_init_channel_map(priv);
 918         if (ret) {
 919                 IWL_ERROR("initializing regulatory failed: %d\n", ret);
 920                 goto err;
 921         }
 922
 923         ret = iwlcore_init_geos(priv);
 924         if (ret) {
 925                 IWL_ERROR("initializing geos failed: %d\n", ret);
 926                 goto err_free_channel_map;
 927         }
 928
 929         return 0;
 930
 931 err_free_channel_map:
 932         iwl_free_channel_map(priv);
 933 err:
 934         return ret;
 935 }
 936 EXPORT_SYMBOL(iwl_init_drv);
 937
 938 void iwl_free_calib_results(struct iwl_priv *priv)
 939 {
 940         kfree(priv->calib_results.lo_res);
 941         priv->calib_results.lo_res = NULL;
 942         priv->calib_results.lo_res_len = 0;
 943
 944         kfree(priv->calib_results.tx_iq_res);
 945         priv->calib_results.tx_iq_res = NULL;
 946         priv->calib_results.tx_iq_res_len = 0;
 947
 948         kfree(priv->calib_results.tx_iq_perd_res);
 949         priv->calib_results.tx_iq_perd_res = NULL;
 950         priv->calib_results.tx_iq_perd_res_len = 0;
 951 }
 952 EXPORT_SYMBOL(iwl_free_calib_results);
 953
 954 int iwl_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
 955 {
 956         int ret = 0;
 957         if (tx_power < IWL_TX_POWER_TARGET_POWER_MIN) {
 958                 IWL_WARNING("Requested user TXPOWER %d below limit.\n",
 959                             priv->tx_power_user_lmt);
 960                 return -EINVAL;
 961         }
 962
 963         if (tx_power > IWL_TX_POWER_TARGET_POWER_MAX) {
 964                 IWL_WARNING("Requested user TXPOWER %d above limit.\n",
 965                             priv->tx_power_user_lmt);
 966                 return -EINVAL;
 967         }
 968
 969         if (priv->tx_power_user_lmt != tx_power)
 970                 force = true;
 971
 972         priv->tx_power_user_lmt = tx_power;
 973
 974         if (force && priv->cfg->ops->lib->send_tx_power)
 975                 ret = priv->cfg->ops->lib->send_tx_power(priv);
 976
 977         return ret;
 978 }
 979 EXPORT_SYMBOL(iwl_set_tx_power);
 980
 981
 982 void iwl_uninit_drv(struct iwl_priv *priv)
 983 {
 984         iwl_free_calib_results(priv);
 985         iwlcore_free_geos(priv);
 986         iwl_free_channel_map(priv);
 987         kfree(priv->scan);
 988 }
 989 EXPORT_SYMBOL(iwl_uninit_drv);
 990
 991 int iwl_send_statistics_request(struct iwl_priv *priv, u8 flags)
 992 {
 993         u32 stat_flags = 0;
 994         struct iwl_host_cmd cmd = {
 995                 .id = REPLY_STATISTICS_CMD,
 996                 .meta.flags = flags,
 997                 .len = sizeof(stat_flags),
 998                 .data = (u8 *) &stat_flags,
 999         };
1000         return iwl_send_cmd(priv, &cmd);
1001 }
1002 EXPORT_SYMBOL(iwl_send_statistics_request);
1003
1004 /**
1005  * iwl_verify_inst_sparse - verify runtime uCode image in card vs. host,
1006  *   using sample data 100 bytes apart.  If these sample points are good,
1007  *   it's a pretty good bet that everything between them is good, too.
1008  */
1009 static int iwlcore_verify_inst_sparse(struct iwl_priv *priv, __le32 *image, u32 len)
1010 {
1011         u32 val;
1012         int ret = 0;
1013         u32 errcnt = 0;
1014         u32 i;
1015
1016         IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
1017
1018         ret = iwl_grab_nic_access(priv);
1019         if (ret)
1020                 return ret;
1021
1022         for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
1023                 /* read data comes through single port, auto-incr addr */
1024                 /* NOTE: Use the debugless read so we don't flood kernel log
1025                  * if IWL_DL_IO is set */
1026                 iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR,
1027                         i + RTC_INST_LOWER_BOUND);
1028                 val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1029                 if (val != le32_to_cpu(*image)) {
1030                         ret = -EIO;
1031                         errcnt++;
1032                         if (errcnt >= 3)
1033                                 break;
1034                 }
1035         }
1036
1037         iwl_release_nic_access(priv);
1038
1039         return ret;
1040 }
1041
1042 /**
1043  * iwlcore_verify_inst_full - verify runtime uCode image in card vs. host,
1044  *     looking at all data.
1045  */
1046 static int iwl_verify_inst_full(struct iwl_priv *priv, __le32 *image,
1047                                  u32 len)
1048 {
1049         u32 val;
1050         u32 save_len = len;
1051         int ret = 0;
1052         u32 errcnt;
1053
1054         IWL_DEBUG_INFO("ucode inst image size is %u\n", len);
1055
1056         ret = iwl_grab_nic_access(priv);
1057         if (ret)
1058                 return ret;
1059
1060         iwl_write_direct32(priv, HBUS_TARG_MEM_RADDR, RTC_INST_LOWER_BOUND);
1061
1062         errcnt = 0;
1063         for (; len > 0; len -= sizeof(u32), image++) {
1064                 /* read data comes through single port, auto-incr addr */
1065                 /* NOTE: Use the debugless read so we don't flood kernel log
1066                  * if IWL_DL_IO is set */
1067                 val = _iwl_read_direct32(priv, HBUS_TARG_MEM_RDAT);
1068                 if (val != le32_to_cpu(*image)) {
1069                         IWL_ERROR("uCode INST section is invalid at "
1070                                   "offset 0x%x, is 0x%x, s/b 0x%x\n",
1071                                   save_len - len, val, le32_to_cpu(*image));
1072                         ret = -EIO;
1073                         errcnt++;
1074                         if (errcnt >= 20)
1075                                 break;
1076                 }
1077         }
1078
1079         iwl_release_nic_access(priv);
1080
1081         if (!errcnt)
1082                 IWL_DEBUG_INFO
1083                     ("ucode image in INSTRUCTION memory is good\n");
1084
1085         return ret;
1086 }
1087
1088 /**
1089  * iwl_verify_ucode - determine which instruction image is in SRAM,
1090  *    and verify its contents
1091  */
1092 int iwl_verify_ucode(struct iwl_priv *priv)
1093 {
1094         __le32 *image;
1095         u32 len;
1096         int ret;
1097
1098         /* Try bootstrap */
1099         image = (__le32 *)priv->ucode_boot.v_addr;
1100         len = priv->ucode_boot.len;
1101         ret = iwlcore_verify_inst_sparse(priv, image, len);
1102         if (!ret) {
1103                 IWL_DEBUG_INFO("Bootstrap uCode is good in inst SRAM\n");
1104                 return 0;
1105         }
1106
1107         /* Try initialize */
1108         image = (__le32 *)priv->ucode_init.v_addr;
1109         len = priv->ucode_init.len;
1110         ret = iwlcore_verify_inst_sparse(priv, image, len);
1111         if (!ret) {
1112                 IWL_DEBUG_INFO("Initialize uCode is good in inst SRAM\n");
1113                 return 0;
1114         }
1115
1116         /* Try runtime/protocol */
1117         image = (__le32 *)priv->ucode_code.v_addr;
1118         len = priv->ucode_code.len;
1119         ret = iwlcore_verify_inst_sparse(priv, image, len);
1120         if (!ret) {
1121                 IWL_DEBUG_INFO("Runtime uCode is good in inst SRAM\n");
1122                 return 0;
1123         }
1124
1125         IWL_ERROR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
1126
1127         /* Since nothing seems to match, show first several data entries in
1128          * instruction SRAM, so maybe visual inspection will give a clue.
1129          * Selection of bootstrap image (vs. other images) is arbitrary. */
1130         image = (__le32 *)priv->ucode_boot.v_addr;
1131         len = priv->ucode_boot.len;
1132         ret = iwl_verify_inst_full(priv, image, len);
1133
1134         return ret;
1135 }
1136 EXPORT_SYMBOL(iwl_verify_ucode);
1137
1138
1139 static const char *desc_lookup(int i)
1140 {
1141         switch (i) {
1142         case 1:
1143                 return "FAIL";
1144         case 2:
1145                 return "BAD_PARAM";
1146         case 3:
1147                 return "BAD_CHECKSUM";
1148         case 4:
1149                 return "NMI_INTERRUPT";
1150         case 5:
1151                 return "SYSASSERT";
1152         case 6:
1153                 return "FATAL_ERROR";
1154         }
1155
1156         return "UNKNOWN";
1157 }
1158
1159 #define ERROR_START_OFFSET  (1 * sizeof(u32))
1160 #define ERROR_ELEM_SIZE     (7 * sizeof(u32))
1161
1162 void iwl_dump_nic_error_log(struct iwl_priv *priv)
1163 {
1164         u32 data2, line;
1165         u32 desc, time, count, base, data1;
1166         u32 blink1, blink2, ilink1, ilink2;
1167         int ret;
1168
1169         if (priv->ucode_type == UCODE_INIT)
1170                 base = le32_to_cpu(priv->card_alive_init.error_event_table_ptr);
1171         else
1172                 base = le32_to_cpu(priv->card_alive.error_event_table_ptr);
1173
1174         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1175                 IWL_ERROR("Not valid error log pointer 0x%08X\n", base);
1176                 return;
1177         }
1178
1179         ret = iwl_grab_nic_access(priv);
1180         if (ret) {
1181                 IWL_WARNING("Can not read from adapter at this time.\n");
1182                 return;
1183         }
1184
1185         count = iwl_read_targ_mem(priv, base);
1186
1187         if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
1188                 IWL_ERROR("Start IWL Error Log Dump:\n");
1189                 IWL_ERROR("Status: 0x%08lX, count: %d\n", priv->status, count);
1190         }
1191
1192         desc = iwl_read_targ_mem(priv, base + 1 * sizeof(u32));
1193         blink1 = iwl_read_targ_mem(priv, base + 3 * sizeof(u32));
1194         blink2 = iwl_read_targ_mem(priv, base + 4 * sizeof(u32));
1195         ilink1 = iwl_read_targ_mem(priv, base + 5 * sizeof(u32));
1196         ilink2 = iwl_read_targ_mem(priv, base + 6 * sizeof(u32));
1197         data1 = iwl_read_targ_mem(priv, base + 7 * sizeof(u32));
1198         data2 = iwl_read_targ_mem(priv, base + 8 * sizeof(u32));
1199         line = iwl_read_targ_mem(priv, base + 9 * sizeof(u32));
1200         time = iwl_read_targ_mem(priv, base + 11 * sizeof(u32));
1201
1202         IWL_ERROR("Desc        Time       "
1203                 "data1      data2      line\n");
1204         IWL_ERROR("%-13s (#%d) %010u 0x%08X 0x%08X %u\n",
1205                 desc_lookup(desc), desc, time, data1, data2, line);
1206         IWL_ERROR("blink1  blink2  ilink1  ilink2\n");
1207         IWL_ERROR("0x%05X 0x%05X 0x%05X 0x%05X\n", blink1, blink2,
1208                 ilink1, ilink2);
1209
1210         iwl_release_nic_access(priv);
1211 }
1212 EXPORT_SYMBOL(iwl_dump_nic_error_log);
1213
1214 #define EVENT_START_OFFSET  (4 * sizeof(u32))
1215
1216 /**
1217  * iwl_print_event_log - Dump error event log to syslog
1218  *
1219  * NOTE: Must be called with iwl4965_grab_nic_access() already obtained!
1220  */
1221 void iwl_print_event_log(struct iwl_priv *priv, u32 start_idx,
1222                                 u32 num_events, u32 mode)
1223 {
1224         u32 i;
1225         u32 base;       /* SRAM byte address of event log header */
1226         u32 event_size; /* 2 u32s, or 3 u32s if timestamp recorded */
1227         u32 ptr;        /* SRAM byte address of log data */
1228         u32 ev, time, data; /* event log data */
1229
1230         if (num_events == 0)
1231                 return;
1232         if (priv->ucode_type == UCODE_INIT)
1233                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1234         else
1235                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1236
1237         if (mode == 0)
1238                 event_size = 2 * sizeof(u32);
1239         else
1240                 event_size = 3 * sizeof(u32);
1241
1242         ptr = base + EVENT_START_OFFSET + (start_idx * event_size);
1243
1244         /* "time" is actually "data" for mode 0 (no timestamp).
1245         * place event id # at far right for easier visual parsing. */
1246         for (i = 0; i < num_events; i++) {
1247                 ev = iwl_read_targ_mem(priv, ptr);
1248                 ptr += sizeof(u32);
1249                 time = iwl_read_targ_mem(priv, ptr);
1250                 ptr += sizeof(u32);
1251                 if (mode == 0) {
1252                         /* data, ev */
1253                         IWL_ERROR("EVT_LOG:0x%08x:%04u\n", time, ev);
1254                 } else {
1255                         data = iwl_read_targ_mem(priv, ptr);
1256                         ptr += sizeof(u32);
1257                         IWL_ERROR("EVT_LOGT:%010u:0x%08x:%04u\n",
1258                                         time, data, ev);
1259                 }
1260         }
1261 }
1262 EXPORT_SYMBOL(iwl_print_event_log);
1263
1264
1265 void iwl_dump_nic_event_log(struct iwl_priv *priv)
1266 {
1267         int ret;
1268         u32 base;       /* SRAM byte address of event log header */
1269         u32 capacity;   /* event log capacity in # entries */
1270         u32 mode;       /* 0 - no timestamp, 1 - timestamp recorded */
1271         u32 num_wraps;  /* # times uCode wrapped to top of log */
1272         u32 next_entry; /* index of next entry to be written by uCode */
1273         u32 size;       /* # entries that we'll print */
1274
1275         if (priv->ucode_type == UCODE_INIT)
1276                 base = le32_to_cpu(priv->card_alive_init.log_event_table_ptr);
1277         else
1278                 base = le32_to_cpu(priv->card_alive.log_event_table_ptr);
1279
1280         if (!priv->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
1281                 IWL_ERROR("Invalid event log pointer 0x%08X\n", base);
1282                 return;
1283         }
1284
1285         ret = iwl_grab_nic_access(priv);
1286         if (ret) {
1287                 IWL_WARNING("Can not read from adapter at this time.\n");
1288                 return;
1289         }
1290
1291         /* event log header */
1292         capacity = iwl_read_targ_mem(priv, base);
1293         mode = iwl_read_targ_mem(priv, base + (1 * sizeof(u32)));
1294         num_wraps = iwl_read_targ_mem(priv, base + (2 * sizeof(u32)));
1295         next_entry = iwl_read_targ_mem(priv, base + (3 * sizeof(u32)));
1296
1297         size = num_wraps ? capacity : next_entry;
1298
1299         /* bail out if nothing in log */
1300         if (size == 0) {
1301                 IWL_ERROR("Start IWL Event Log Dump: nothing in log\n");
1302                 iwl_release_nic_access(priv);
1303                 return;
1304         }
1305
1306         IWL_ERROR("Start IWL Event Log Dump: display count %d, wraps %d\n",
1307                         size, num_wraps);
1308
1309         /* if uCode has wrapped back to top of log, start at the oldest entry,
1310          * i.e the next one that uCode would fill. */
1311         if (num_wraps)
1312                 iwl_print_event_log(priv, next_entry,
1313                                         capacity - next_entry, mode);
1314         /* (then/else) start at top of log */
1315         iwl_print_event_log(priv, 0, next_entry, mode);
1316
1317         iwl_release_nic_access(priv);
1318 }
1319 EXPORT_SYMBOL(iwl_dump_nic_event_log);
1320
1321 void iwl_rf_kill_ct_config(struct iwl_priv *priv)
1322 {
1323         struct iwl_ct_kill_config cmd;
1324         unsigned long flags;
1325         int ret = 0;
1326
1327         spin_lock_irqsave(&priv->lock, flags);
1328         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR,
1329                     CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
1330         spin_unlock_irqrestore(&priv->lock, flags);
1331
1332         cmd.critical_temperature_R =
1333                 cpu_to_le32(priv->hw_params.ct_kill_threshold);
1334
1335         ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
1336                                sizeof(cmd), &cmd);
1337         if (ret)
1338                 IWL_ERROR("REPLY_CT_KILL_CONFIG_CMD failed\n");
1339         else
1340                 IWL_DEBUG_INFO("REPLY_CT_KILL_CONFIG_CMD succeeded, "
1341                         "critical temperature is %d\n",
1342                         cmd.critical_temperature_R);
1343 }
1344 EXPORT_SYMBOL(iwl_rf_kill_ct_config);
1345
1346 /*
1347  * CARD_STATE_CMD
1348  *
1349  * Use: Sets the device's internal card state to enable, disable, or halt
1350  *
1351  * When in the 'enable' state the card operates as normal.
1352  * When in the 'disable' state, the card enters into a low power mode.
1353  * When in the 'halt' state, the card is shut down and must be fully
1354  * restarted to come back on.
1355  */
1356 static int iwl_send_card_state(struct iwl_priv *priv, u32 flags, u8 meta_flag)
1357 {
1358         struct iwl_host_cmd cmd = {
1359                 .id = REPLY_CARD_STATE_CMD,
1360                 .len = sizeof(u32),
1361                 .data = &flags,
1362                 .meta.flags = meta_flag,
1363         };
1364
1365         return iwl_send_cmd(priv, &cmd);
1366 }
1367
1368 void iwl_radio_kill_sw_disable_radio(struct iwl_priv *priv)
1369 {
1370         unsigned long flags;
1371
1372         if (test_bit(STATUS_RF_KILL_SW, &priv->status))
1373                 return;
1374
1375         IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO OFF\n");
1376
1377         iwl_scan_cancel(priv);
1378         /* FIXME: This is a workaround for AP */
1379         if (priv->iw_mode != IEEE80211_IF_TYPE_AP) {
1380                 spin_lock_irqsave(&priv->lock, flags);
1381                 iwl_write32(priv, CSR_UCODE_DRV_GP1_SET,
1382                             CSR_UCODE_SW_BIT_RFKILL);
1383                 spin_unlock_irqrestore(&priv->lock, flags);
1384                 /* call the host command only if no hw rf-kill set */
1385                 if (!test_bit(STATUS_RF_KILL_HW, &priv->status) &&
1386                     iwl_is_ready(priv))
1387                         iwl_send_card_state(priv,
1388                                 CARD_STATE_CMD_DISABLE, 0);
1389                 set_bit(STATUS_RF_KILL_SW, &priv->status);
1390                         /* make sure mac80211 stop sending Tx frame */
1391                 if (priv->mac80211_registered)
1392                         ieee80211_stop_queues(priv->hw);
1393         }
1394 }
1395 EXPORT_SYMBOL(iwl_radio_kill_sw_disable_radio);
1396
1397 int iwl_radio_kill_sw_enable_radio(struct iwl_priv *priv)
1398 {
1399         unsigned long flags;
1400
1401         if (!test_bit(STATUS_RF_KILL_SW, &priv->status))
1402                 return 0;
1403
1404         IWL_DEBUG_RF_KILL("Manual SW RF KILL set to: RADIO ON\n");
1405
1406         spin_lock_irqsave(&priv->lock, flags);
1407         iwl_write32(priv, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
1408
1409         /* If the driver is up it will receive CARD_STATE_NOTIFICATION
1410          * notification where it will clear SW rfkill status.
1411          * Setting it here would break the handler. Only if the
1412          * interface is down we can set here since we don't
1413          * receive any further notification.
1414          */
1415         if (!priv->is_open)
1416                 clear_bit(STATUS_RF_KILL_SW, &priv->status);
1417         spin_unlock_irqrestore(&priv->lock, flags);
1418
1419         /* wake up ucode */
1420         msleep(10);
1421
1422         spin_lock_irqsave(&priv->lock, flags);
1423         iwl_read32(priv, CSR_UCODE_DRV_GP1);
1424         if (!iwl_grab_nic_access(priv))
1425                 iwl_release_nic_access(priv);
1426         spin_unlock_irqrestore(&priv->lock, flags);
1427
1428         if (test_bit(STATUS_RF_KILL_HW, &priv->status)) {
1429                 IWL_DEBUG_RF_KILL("Can not turn radio back on - "
1430                                   "disabled by HW switch\n");
1431                 return 0;
1432         }
1433
1434         /* If the driver is already loaded, it will receive
1435          * CARD_STATE_NOTIFICATION notifications and the handler will
1436          * call restart to reload the driver.
1437          */
1438         return 1;
1439 }
1440 EXPORT_SYMBOL(iwl_radio_kill_sw_enable_radio);