2 * Dynamic DMA mapping support.
4 * This implementation is for IA-64 platforms that do not support
5 * I/O TLBs (aka DMA address translation hardware).
6 * Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
7 * Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
8 * Copyright (C) 2000, 2003 Hewlett-Packard Co
9 * David Mosberger-Tang <davidm@hpl.hp.com>
11 * 03/05/07 davidm Switch from PCI-DMA to generic device DMA API.
12 * 00/12/13 davidm Rename to swiotlb.c and add mark_clean() to avoid
13 * unnecessary i-cache flushing.
14 * 04/07/.. ak Better overflow handling. Assorted fixes.
17 #include <linux/cache.h>
19 #include <linux/module.h>
20 #include <linux/pci.h>
21 #include <linux/spinlock.h>
22 #include <linux/string.h>
23 #include <linux/types.h>
24 #include <linux/ctype.h>
30 #include <linux/init.h>
31 #include <linux/bootmem.h>
33 #define OFFSET(val,align) ((unsigned long) \
34 ( (val) & ( (align) - 1)))
36 #define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset)
37 #define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
40 * Maximum allowable number of contiguous slabs to map,
41 * must be a power of 2. What is the appropriate value ?
42 * The complexity of {map,unmap}_single is linearly dependent on this value.
44 #define IO_TLB_SEGSIZE 128
47 * log of the size of each IO TLB slab. The number of slabs is command line
50 #define IO_TLB_SHIFT 11
55 * Used to do a quick range check in swiotlb_unmap_single and
56 * swiotlb_sync_single_*, to see if the memory was in fact allocated by this
59 static char *io_tlb_start, *io_tlb_end;
62 * The number of IO TLB blocks (in groups of 64) betweeen io_tlb_start and
63 * io_tlb_end. This is command line adjustable via setup_io_tlb_npages.
65 static unsigned long io_tlb_nslabs;
68 * When the IOMMU overflows we return a fallback buffer. This sets the size.
70 static unsigned long io_tlb_overflow = 32*1024;
72 void *io_tlb_overflow_buffer;
75 * This is a free list describing the number of free entries available from
78 static unsigned int *io_tlb_list;
79 static unsigned int io_tlb_index;
82 * We need to save away the original address corresponding to a mapped entry
83 * for the sync operations.
85 static unsigned char **io_tlb_orig_addr;
88 * Protect the above data structures in the map and unmap calls
90 static DEFINE_SPINLOCK(io_tlb_lock);
93 setup_io_tlb_npages(char *str)
96 io_tlb_nslabs = simple_strtoul(str, &str, 0);
97 /* avoid tail segment of size < IO_TLB_SEGSIZE */
98 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
102 if (!strcmp(str, "force"))
106 __setup("swiotlb=", setup_io_tlb_npages);
107 /* make io_tlb_overflow tunable too? */
110 * Statically reserve bounce buffer space and initialize bounce buffer data
111 * structures for the software IO TLB used to implement the PCI DMA API.
114 swiotlb_init_with_default_size (size_t default_size)
118 if (!io_tlb_nslabs) {
119 io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
120 io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
124 * Get IO TLB memory from the low pages
126 io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs *
127 (1 << IO_TLB_SHIFT));
129 panic("Cannot allocate SWIOTLB buffer");
130 io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
133 * Allocate and initialize the free list array. This array is used
134 * to find contiguous free memory regions of size up to IO_TLB_SEGSIZE
135 * between io_tlb_start and io_tlb_end.
137 io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));
138 for (i = 0; i < io_tlb_nslabs; i++)
139 io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
141 io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));
144 * Get the overflow emergency buffer
146 io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
147 printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n",
148 virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
154 swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
158 address_needs_mapping(struct device *hwdev, dma_addr_t addr)
160 dma_addr_t mask = 0xffffffff;
161 /* If the device has a mask, use it, otherwise default to 32 bits */
162 if (hwdev && hwdev->dma_mask)
163 mask = *hwdev->dma_mask;
164 return (addr & ~mask) != 0;
168 * Allocates bounce buffer and returns its kernel virtual address.
171 map_single(struct device *hwdev, char *buffer, size_t size, int dir)
175 unsigned int nslots, stride, index, wrap;
179 * For mappings greater than a page, we limit the stride (and
180 * hence alignment) to a page size.
182 nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
183 if (size > PAGE_SIZE)
184 stride = (1 << (PAGE_SHIFT - IO_TLB_SHIFT));
192 * Find suitable number of IO TLB entries size that will fit this
193 * request and allocate a buffer from that IO TLB pool.
195 spin_lock_irqsave(&io_tlb_lock, flags);
197 wrap = index = ALIGN(io_tlb_index, stride);
199 if (index >= io_tlb_nslabs)
204 * If we find a slot that indicates we have 'nslots'
205 * number of contiguous buffers, we allocate the
206 * buffers from that slot and mark the entries as '0'
207 * indicating unavailable.
209 if (io_tlb_list[index] >= nslots) {
212 for (i = index; i < (int) (index + nslots); i++)
214 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
215 io_tlb_list[i] = ++count;
216 dma_addr = io_tlb_start + (index << IO_TLB_SHIFT);
219 * Update the indices to avoid searching in
222 io_tlb_index = ((index + nslots) < io_tlb_nslabs
223 ? (index + nslots) : 0);
228 if (index >= io_tlb_nslabs)
230 } while (index != wrap);
232 spin_unlock_irqrestore(&io_tlb_lock, flags);
236 spin_unlock_irqrestore(&io_tlb_lock, flags);
239 * Save away the mapping from the original address to the DMA address.
240 * This is needed when we sync the memory. Then we sync the buffer if
243 io_tlb_orig_addr[index] = buffer;
244 if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
245 memcpy(dma_addr, buffer, size);
251 * dma_addr is the kernel virtual address of the bounce buffer to unmap.
254 unmap_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
257 int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
258 int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
259 char *buffer = io_tlb_orig_addr[index];
262 * First, sync the memory before unmapping the entry
264 if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
266 * bounce... copy the data back into the original buffer * and
267 * delete the bounce buffer.
269 memcpy(buffer, dma_addr, size);
272 * Return the buffer to the free list by setting the corresponding
273 * entries to indicate the number of contigous entries available.
274 * While returning the entries to the free list, we merge the entries
275 * with slots below and above the pool being returned.
277 spin_lock_irqsave(&io_tlb_lock, flags);
279 count = ((index + nslots) < ALIGN(index + 1, IO_TLB_SEGSIZE) ?
280 io_tlb_list[index + nslots] : 0);
282 * Step 1: return the slots to the free list, merging the
283 * slots with superceeding slots
285 for (i = index + nslots - 1; i >= index; i--)
286 io_tlb_list[i] = ++count;
288 * Step 2: merge the returned slots with the preceding slots,
289 * if available (non zero)
291 for (i = index - 1; (OFFSET(i, IO_TLB_SEGSIZE) != IO_TLB_SEGSIZE -1) && io_tlb_list[i]; i--)
292 io_tlb_list[i] = ++count;
294 spin_unlock_irqrestore(&io_tlb_lock, flags);
298 sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
300 int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
301 char *buffer = io_tlb_orig_addr[index];
304 * bounce... copy the data back into/from the original buffer
305 * XXX How do you handle DMA_BIDIRECTIONAL here ?
307 if (dir == DMA_FROM_DEVICE)
308 memcpy(buffer, dma_addr, size);
309 else if (dir == DMA_TO_DEVICE)
310 memcpy(dma_addr, buffer, size);
316 swiotlb_alloc_coherent(struct device *hwdev, size_t size,
317 dma_addr_t *dma_handle, int flags)
319 unsigned long dev_addr;
321 int order = get_order(size);
324 * XXX fix me: the DMA API should pass us an explicit DMA mask
325 * instead, or use ZONE_DMA32 (ia64 overloads ZONE_DMA to be a ~32
326 * bit range instead of a 16MB one).
330 ret = (void *)__get_free_pages(flags, order);
331 if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) {
333 * The allocated memory isn't reachable by the device.
334 * Fall back on swiotlb_map_single().
336 free_pages((unsigned long) ret, order);
341 * We are either out of memory or the device can't DMA
342 * to GFP_DMA memory; fall back on
343 * swiotlb_map_single(), which will grab memory from
344 * the lowest available address range.
347 handle = swiotlb_map_single(NULL, NULL, size, DMA_FROM_DEVICE);
348 if (dma_mapping_error(handle))
351 ret = phys_to_virt(handle);
354 memset(ret, 0, size);
355 dev_addr = virt_to_phys(ret);
357 /* Confirm address can be DMA'd by device */
358 if (address_needs_mapping(hwdev, dev_addr)) {
359 printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n",
360 (unsigned long long)*hwdev->dma_mask, dev_addr);
361 panic("swiotlb_alloc_coherent: allocated memory is out of "
364 *dma_handle = dev_addr;
369 swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
370 dma_addr_t dma_handle)
372 if (!(vaddr >= (void *)io_tlb_start
373 && vaddr < (void *)io_tlb_end))
374 free_pages((unsigned long) vaddr, get_order(size));
376 /* DMA_TO_DEVICE to avoid memcpy in unmap_single */
377 swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE);
381 swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
384 * Ran out of IOMMU space for this operation. This is very bad.
385 * Unfortunately the drivers cannot handle this operation properly.
386 * unless they check for pci_dma_mapping_error (most don't)
387 * When the mapping is small enough return a static buffer to limit
388 * the damage, or panic when the transfer is too big.
390 printk(KERN_ERR "PCI-DMA: Out of SW-IOMMU space for %lu bytes at "
391 "device %s\n", size, dev ? dev->bus_id : "?");
393 if (size > io_tlb_overflow && do_panic) {
394 if (dir == PCI_DMA_FROMDEVICE || dir == PCI_DMA_BIDIRECTIONAL)
395 panic("PCI-DMA: Memory would be corrupted\n");
396 if (dir == PCI_DMA_TODEVICE || dir == PCI_DMA_BIDIRECTIONAL)
397 panic("PCI-DMA: Random memory would be DMAed\n");
402 * Map a single buffer of the indicated size for DMA in streaming mode. The
403 * PCI address to use is returned.
405 * Once the device is given the dma address, the device owns this memory until
406 * either swiotlb_unmap_single or swiotlb_dma_sync_single is performed.
409 swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
411 unsigned long dev_addr = virt_to_phys(ptr);
417 * If the pointer passed in happens to be in the device's DMA window,
418 * we can safely return the device addr and not worry about bounce
421 if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force)
425 * Oh well, have to allocate and map a bounce buffer.
427 map = map_single(hwdev, ptr, size, dir);
429 swiotlb_full(hwdev, size, dir, 1);
430 map = io_tlb_overflow_buffer;
433 dev_addr = virt_to_phys(map);
436 * Ensure that the address returned is DMA'ble
438 if (address_needs_mapping(hwdev, dev_addr))
439 panic("map_single: bounce buffer is not DMA'ble");
445 * Since DMA is i-cache coherent, any (complete) pages that were written via
446 * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
447 * flush them when they get mapped into an executable vm-area.
450 mark_clean(void *addr, size_t size)
452 unsigned long pg_addr, end;
454 pg_addr = PAGE_ALIGN((unsigned long) addr);
455 end = (unsigned long) addr + size;
456 while (pg_addr + PAGE_SIZE <= end) {
457 struct page *page = virt_to_page(pg_addr);
458 set_bit(PG_arch_1, &page->flags);
459 pg_addr += PAGE_SIZE;
464 * Unmap a single streaming mode DMA translation. The dma_addr and size must
465 * match what was provided for in a previous swiotlb_map_single call. All
466 * other usages are undefined.
468 * After this call, reads by the cpu to the buffer are guaranteed to see
469 * whatever the device wrote there.
472 swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
475 char *dma_addr = phys_to_virt(dev_addr);
479 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
480 unmap_single(hwdev, dma_addr, size, dir);
481 else if (dir == DMA_FROM_DEVICE)
482 mark_clean(dma_addr, size);
486 * Make physical memory consistent for a single streaming mode DMA translation
489 * If you perform a swiotlb_map_single() but wish to interrogate the buffer
490 * using the cpu, yet do not wish to teardown the PCI dma mapping, you must
491 * call this function before doing so. At the next point you give the PCI dma
492 * address back to the card, you must first perform a
493 * swiotlb_dma_sync_for_device, and then the device again owns the buffer
496 swiotlb_sync_single_for_cpu(struct device *hwdev, dma_addr_t dev_addr,
497 size_t size, int dir)
499 char *dma_addr = phys_to_virt(dev_addr);
503 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
504 sync_single(hwdev, dma_addr, size, dir);
505 else if (dir == DMA_FROM_DEVICE)
506 mark_clean(dma_addr, size);
510 swiotlb_sync_single_for_device(struct device *hwdev, dma_addr_t dev_addr,
511 size_t size, int dir)
513 char *dma_addr = phys_to_virt(dev_addr);
517 if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
518 sync_single(hwdev, dma_addr, size, dir);
519 else if (dir == DMA_FROM_DEVICE)
520 mark_clean(dma_addr, size);
524 * Map a set of buffers described by scatterlist in streaming mode for DMA.
525 * This is the scatter-gather version of the above swiotlb_map_single
526 * interface. Here the scatter gather list elements are each tagged with the
527 * appropriate dma address and length. They are obtained via
528 * sg_dma_{address,length}(SG).
530 * NOTE: An implementation may be able to use a smaller number of
531 * DMA address/length pairs than there are SG table elements.
532 * (for example via virtual mapping capabilities)
533 * The routine returns the number of addr/length pairs actually
534 * used, at most nents.
536 * Device ownership issues as mentioned above for swiotlb_map_single are the
540 swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
544 unsigned long dev_addr;
550 for (i = 0; i < nelems; i++, sg++) {
551 addr = SG_ENT_VIRT_ADDRESS(sg);
552 dev_addr = virt_to_phys(addr);
553 if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
554 sg->dma_address = (dma_addr_t) virt_to_phys(map_single(hwdev, addr, sg->length, dir));
555 if (!sg->dma_address) {
556 /* Don't panic here, we expect map_sg users
557 to do proper error handling. */
558 swiotlb_full(hwdev, sg->length, dir, 0);
559 swiotlb_unmap_sg(hwdev, sg - i, i, dir);
560 sg[0].dma_length = 0;
564 sg->dma_address = dev_addr;
565 sg->dma_length = sg->length;
571 * Unmap a set of streaming mode DMA translations. Again, cpu read rules
572 * concerning calls here are the same as for swiotlb_unmap_single() above.
575 swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
583 for (i = 0; i < nelems; i++, sg++)
584 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
585 unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir);
586 else if (dir == DMA_FROM_DEVICE)
587 mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
591 * Make physical memory consistent for a set of streaming mode DMA translations
594 * The same as swiotlb_sync_single_* but for a scatter-gather list, same rules
598 swiotlb_sync_sg_for_cpu(struct device *hwdev, struct scatterlist *sg,
606 for (i = 0; i < nelems; i++, sg++)
607 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
608 sync_single(hwdev, (void *) sg->dma_address,
609 sg->dma_length, dir);
613 swiotlb_sync_sg_for_device(struct device *hwdev, struct scatterlist *sg,
621 for (i = 0; i < nelems; i++, sg++)
622 if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
623 sync_single(hwdev, (void *) sg->dma_address,
624 sg->dma_length, dir);
628 swiotlb_dma_mapping_error(dma_addr_t dma_addr)
630 return (dma_addr == virt_to_phys(io_tlb_overflow_buffer));
634 * Return whether the given PCI device DMA address mask can be supported
635 * properly. For example, if your device can only drive the low 24-bits
636 * during PCI bus mastering, then you would pass 0x00ffffff as the mask to
640 swiotlb_dma_supported (struct device *hwdev, u64 mask)
642 return (virt_to_phys (io_tlb_end) - 1) <= mask;
645 EXPORT_SYMBOL(swiotlb_init);
646 EXPORT_SYMBOL(swiotlb_map_single);
647 EXPORT_SYMBOL(swiotlb_unmap_single);
648 EXPORT_SYMBOL(swiotlb_map_sg);
649 EXPORT_SYMBOL(swiotlb_unmap_sg);
650 EXPORT_SYMBOL(swiotlb_sync_single_for_cpu);
651 EXPORT_SYMBOL(swiotlb_sync_single_for_device);
652 EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
653 EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
654 EXPORT_SYMBOL(swiotlb_dma_mapping_error);
655 EXPORT_SYMBOL(swiotlb_alloc_coherent);
656 EXPORT_SYMBOL(swiotlb_free_coherent);
657 EXPORT_SYMBOL(swiotlb_dma_supported);