1 /******************************************************************************
3 Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/config.h>
138 #include <linux/errno.h>
139 #include <linux/if_arp.h>
140 #include <linux/in6.h>
141 #include <linux/in.h>
142 #include <linux/ip.h>
143 #include <linux/kernel.h>
144 #include <linux/kmod.h>
145 #include <linux/module.h>
146 #include <linux/netdevice.h>
147 #include <linux/ethtool.h>
148 #include <linux/pci.h>
149 #include <linux/dma-mapping.h>
150 #include <linux/proc_fs.h>
151 #include <linux/skbuff.h>
152 #include <asm/uaccess.h>
154 #define __KERNEL_SYSCALLS__
155 #include <linux/fs.h>
156 #include <linux/mm.h>
157 #include <linux/slab.h>
158 #include <linux/unistd.h>
159 #include <linux/stringify.h>
160 #include <linux/tcp.h>
161 #include <linux/types.h>
162 #include <linux/version.h>
163 #include <linux/time.h>
164 #include <linux/firmware.h>
165 #include <linux/acpi.h>
166 #include <linux/ctype.h>
170 #define IPW2100_VERSION "1.1.0"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2004 Intel Corporation"
178 /* Debugging stuff */
179 #ifdef CONFIG_IPW_DEBUG
180 #define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
183 MODULE_DESCRIPTION(DRV_DESCRIPTION);
184 MODULE_VERSION(DRV_VERSION);
185 MODULE_AUTHOR(DRV_COPYRIGHT);
186 MODULE_LICENSE("GPL");
188 static int debug = 0;
190 static int channel = 0;
191 static int associate = 1;
192 static int disable = 0;
194 static struct ipw2100_fw ipw2100_firmware;
197 #include <linux/moduleparam.h>
198 module_param(debug, int, 0444);
199 module_param(mode, int, 0444);
200 module_param(channel, int, 0444);
201 module_param(associate, int, 0444);
202 module_param(disable, int, 0444);
204 MODULE_PARM_DESC(debug, "debug level");
205 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
206 MODULE_PARM_DESC(channel, "channel");
207 MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
208 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
210 static u32 ipw2100_debug_level = IPW_DL_NONE;
212 #ifdef CONFIG_IPW_DEBUG
213 #define IPW_DEBUG(level, message...) \
215 if (ipw2100_debug_level & (level)) { \
216 printk(KERN_DEBUG "ipw2100: %c %s ", \
217 in_interrupt() ? 'I' : 'U', __FUNCTION__); \
222 #define IPW_DEBUG(level, message...) do {} while (0)
223 #endif /* CONFIG_IPW_DEBUG */
225 #ifdef CONFIG_IPW_DEBUG
226 static const char *command_types[] = {
228 "unused", /* HOST_ATTENTION */
230 "unused", /* SLEEP */
231 "unused", /* HOST_POWER_DOWN */
234 "unused", /* SET_IMR */
237 "AUTHENTICATION_TYPE",
240 "INTERNATIONAL_MODE",
255 "CLEAR_ALL_MULTICAST",
276 "AP_OR_STATION_TABLE",
280 "unused", /* SAVE_CALIBRATION */
281 "unused", /* RESTORE_CALIBRATION */
285 "HOST_PRE_POWER_DOWN",
286 "unused", /* HOST_INTERRUPT_COALESCING */
288 "CARD_DISABLE_PHY_OFF",
292 "SET_STATION_STAT_BITS",
293 "CLEAR_STATIONS_STAT_BITS",
295 "SET_SECURITY_INFORMATION",
296 "DISASSOCIATION_BSSID",
302 /* Pre-decl until we get the code solid and then we can clean it up */
303 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
304 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
305 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
307 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
308 static void ipw2100_queues_free(struct ipw2100_priv *priv);
309 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
311 static int ipw2100_fw_download(struct ipw2100_priv *priv,
312 struct ipw2100_fw *fw);
313 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
314 struct ipw2100_fw *fw);
315 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
317 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
319 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
320 struct ipw2100_fw *fw);
321 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
322 struct ipw2100_fw *fw);
323 static void ipw2100_wx_event_work(struct ipw2100_priv *priv);
324 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev);
325 static struct iw_handler_def ipw2100_wx_handler_def;
328 static inline void read_register(struct net_device *dev, u32 reg, u32 *val)
330 *val = readl((void __iomem *)(dev->base_addr + reg));
331 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
334 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
336 writel(val, (void __iomem *)(dev->base_addr + reg));
337 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
340 static inline void read_register_word(struct net_device *dev, u32 reg, u16 *val)
342 *val = readw((void __iomem *)(dev->base_addr + reg));
343 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
346 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 *val)
348 *val = readb((void __iomem *)(dev->base_addr + reg));
349 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
352 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
354 writew(val, (void __iomem *)(dev->base_addr + reg));
355 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
359 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
361 writeb(val, (void __iomem *)(dev->base_addr + reg));
362 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
365 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 *val)
367 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
368 addr & IPW_REG_INDIRECT_ADDR_MASK);
369 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
372 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
374 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
375 addr & IPW_REG_INDIRECT_ADDR_MASK);
376 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
379 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 *val)
381 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
382 addr & IPW_REG_INDIRECT_ADDR_MASK);
383 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
386 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
388 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
389 addr & IPW_REG_INDIRECT_ADDR_MASK);
390 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
393 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 *val)
395 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
396 addr & IPW_REG_INDIRECT_ADDR_MASK);
397 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
400 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
402 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
403 addr & IPW_REG_INDIRECT_ADDR_MASK);
404 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
407 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
409 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
410 addr & IPW_REG_INDIRECT_ADDR_MASK);
413 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
415 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
418 static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
426 /* read first nibble byte by byte */
427 aligned_addr = addr & (~0x3);
428 dif_len = addr - aligned_addr;
430 /* Start reading at aligned_addr + dif_len */
431 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
433 for (i = dif_len; i < 4; i++, buf++)
435 dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
442 /* read DWs through autoincrement registers */
443 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
445 aligned_len = len & (~0x3);
446 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
448 dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *)buf);
450 /* copy the last nibble */
451 dif_len = len - aligned_len;
452 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
453 for (i = 0; i < dif_len; i++, buf++)
455 dev, IPW_REG_INDIRECT_ACCESS_DATA + i, *buf);
458 static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
466 /* read first nibble byte by byte */
467 aligned_addr = addr & (~0x3);
468 dif_len = addr - aligned_addr;
470 /* Start reading at aligned_addr + dif_len */
471 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
473 for (i = dif_len; i < 4; i++, buf++)
475 dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
481 /* read DWs through autoincrement registers */
482 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
484 aligned_len = len & (~0x3);
485 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
486 read_register(dev, IPW_REG_AUTOINCREMENT_DATA,
489 /* copy the last nibble */
490 dif_len = len - aligned_len;
491 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
493 for (i = 0; i < dif_len; i++, buf++)
494 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA +
498 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
500 return (dev->base_addr &&
501 (readl((void __iomem *)(dev->base_addr + IPW_REG_DOA_DEBUG_AREA_START))
502 == IPW_DATA_DOA_DEBUG_VALUE));
505 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
508 struct ipw2100_ordinals *ordinals = &priv->ordinals;
515 if (ordinals->table1_addr == 0) {
516 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
517 "before they have been loaded.\n");
521 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
522 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
523 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
525 printk(KERN_WARNING DRV_NAME
526 ": ordinal buffer length too small, need %zd\n",
527 IPW_ORD_TAB_1_ENTRY_SIZE);
532 read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
534 read_nic_dword(priv->net_dev, addr, val);
536 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
541 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
543 ord -= IPW_START_ORD_TAB_2;
545 /* get the address of statistic */
546 read_nic_dword(priv->net_dev, ordinals->table2_addr + (ord << 3),
549 /* get the second DW of statistics ;
550 * two 16-bit words - first is length, second is count */
551 read_nic_dword(priv->net_dev,
552 ordinals->table2_addr + (ord << 3) + sizeof(u32),
555 /* get each entry length */
556 field_len = *((u16 *)&field_info);
558 /* get number of entries */
559 field_count = *(((u16 *)&field_info) + 1);
561 /* abort if no enought memory */
562 total_length = field_len * field_count;
563 if (total_length > *len) {
572 /* read the ordinal data from the SRAM */
573 read_nic_memory(priv->net_dev, addr, total_length, val);
578 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
579 "in table 2\n", ord);
584 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 *val,
587 struct ipw2100_ordinals *ordinals = &priv->ordinals;
590 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
591 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
592 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
593 IPW_DEBUG_INFO("wrong size\n");
597 read_nic_dword(priv->net_dev, ordinals->table1_addr + (ord << 2),
600 write_nic_dword(priv->net_dev, addr, *val);
602 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
607 IPW_DEBUG_INFO("wrong table\n");
608 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
614 static char *snprint_line(char *buf, size_t count,
615 const u8 *data, u32 len, u32 ofs)
620 out = snprintf(buf, count, "%08X", ofs);
622 for (l = 0, i = 0; i < 2; i++) {
623 out += snprintf(buf + out, count - out, " ");
624 for (j = 0; j < 8 && l < len; j++, l++)
625 out += snprintf(buf + out, count - out, "%02X ",
628 out += snprintf(buf + out, count - out, " ");
631 out += snprintf(buf + out, count - out, " ");
632 for (l = 0, i = 0; i < 2; i++) {
633 out += snprintf(buf + out, count - out, " ");
634 for (j = 0; j < 8 && l < len; j++, l++) {
635 c = data[(i * 8 + j)];
636 if (!isascii(c) || !isprint(c))
639 out += snprintf(buf + out, count - out, "%c", c);
643 out += snprintf(buf + out, count - out, " ");
649 static void printk_buf(int level, const u8 *data, u32 len)
653 if (!(ipw2100_debug_level & level))
657 printk(KERN_DEBUG "%s\n",
658 snprint_line(line, sizeof(line), &data[ofs],
659 min(len, 16U), ofs));
661 len -= min(len, 16U);
667 #define MAX_RESET_BACKOFF 10
669 static inline void schedule_reset(struct ipw2100_priv *priv)
671 unsigned long now = get_seconds();
673 /* If we haven't received a reset request within the backoff period,
674 * then we can reset the backoff interval so this reset occurs
676 if (priv->reset_backoff &&
677 (now - priv->last_reset > priv->reset_backoff))
678 priv->reset_backoff = 0;
680 priv->last_reset = get_seconds();
682 if (!(priv->status & STATUS_RESET_PENDING)) {
683 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
684 priv->net_dev->name, priv->reset_backoff);
685 netif_carrier_off(priv->net_dev);
686 netif_stop_queue(priv->net_dev);
687 priv->status |= STATUS_RESET_PENDING;
688 if (priv->reset_backoff)
689 queue_delayed_work(priv->workqueue, &priv->reset_work,
690 priv->reset_backoff * HZ);
692 queue_work(priv->workqueue, &priv->reset_work);
694 if (priv->reset_backoff < MAX_RESET_BACKOFF)
695 priv->reset_backoff++;
697 wake_up_interruptible(&priv->wait_command_queue);
699 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
700 priv->net_dev->name);
704 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
705 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
706 struct host_command * cmd)
708 struct list_head *element;
709 struct ipw2100_tx_packet *packet;
713 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
714 command_types[cmd->host_command], cmd->host_command,
715 cmd->host_command_length);
716 printk_buf(IPW_DL_HC, (u8*)cmd->host_command_parameters,
717 cmd->host_command_length);
719 spin_lock_irqsave(&priv->low_lock, flags);
721 if (priv->fatal_error) {
722 IPW_DEBUG_INFO("Attempt to send command while hardware in fatal error condition.\n");
727 if (!(priv->status & STATUS_RUNNING)) {
728 IPW_DEBUG_INFO("Attempt to send command while hardware is not running.\n");
733 if (priv->status & STATUS_CMD_ACTIVE) {
734 IPW_DEBUG_INFO("Attempt to send command while another command is pending.\n");
739 if (list_empty(&priv->msg_free_list)) {
740 IPW_DEBUG_INFO("no available msg buffers\n");
744 priv->status |= STATUS_CMD_ACTIVE;
745 priv->messages_sent++;
747 element = priv->msg_free_list.next;
749 packet = list_entry(element, struct ipw2100_tx_packet, list);
750 packet->jiffy_start = jiffies;
752 /* initialize the firmware command packet */
753 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
754 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
755 packet->info.c_struct.cmd->host_command_len_reg = cmd->host_command_length;
756 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
758 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
759 cmd->host_command_parameters,
760 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
763 DEC_STAT(&priv->msg_free_stat);
765 list_add_tail(element, &priv->msg_pend_list);
766 INC_STAT(&priv->msg_pend_stat);
768 ipw2100_tx_send_commands(priv);
769 ipw2100_tx_send_data(priv);
771 spin_unlock_irqrestore(&priv->low_lock, flags);
774 * We must wait for this command to complete before another
775 * command can be sent... but if we wait more than 3 seconds
776 * then there is a problem.
779 err = wait_event_interruptible_timeout(
780 priv->wait_command_queue, !(priv->status & STATUS_CMD_ACTIVE),
781 HOST_COMPLETE_TIMEOUT);
784 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
785 HOST_COMPLETE_TIMEOUT / (HZ / 100));
786 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
787 priv->status &= ~STATUS_CMD_ACTIVE;
788 schedule_reset(priv);
792 if (priv->fatal_error) {
793 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
794 priv->net_dev->name);
798 /* !!!!! HACK TEST !!!!!
799 * When lots of debug trace statements are enabled, the driver
800 * doesn't seem to have as many firmware restart cycles...
802 * As a test, we're sticking in a 1/100s delay here */
803 set_current_state(TASK_UNINTERRUPTIBLE);
804 schedule_timeout(HZ / 100);
809 spin_unlock_irqrestore(&priv->low_lock, flags);
816 * Verify the values and data access of the hardware
817 * No locks needed or used. No functions called.
819 static int ipw2100_verify(struct ipw2100_priv *priv)
824 u32 val1 = 0x76543210;
825 u32 val2 = 0xFEDCBA98;
827 /* Domain 0 check - all values should be DOA_DEBUG */
828 for (address = IPW_REG_DOA_DEBUG_AREA_START;
829 address < IPW_REG_DOA_DEBUG_AREA_END;
830 address += sizeof(u32)) {
831 read_register(priv->net_dev, address, &data1);
832 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
836 /* Domain 1 check - use arbitrary read/write compare */
837 for (address = 0; address < 5; address++) {
838 /* The memory area is not used now */
839 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
841 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
843 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
845 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
847 if (val1 == data1 && val2 == data2)
856 * Loop until the CARD_DISABLED bit is the same value as the
859 * TODO: See if it would be more efficient to do a wait/wake
860 * cycle and have the completion event trigger the wakeup
863 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
864 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
868 u32 len = sizeof(card_state);
871 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
872 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
875 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
880 /* We'll break out if either the HW state says it is
881 * in the state we want, or if HOST_COMPLETE command
883 if ((card_state == state) ||
884 ((priv->status & STATUS_ENABLED) ?
885 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
886 if (state == IPW_HW_STATE_ENABLED)
887 priv->status |= STATUS_ENABLED;
889 priv->status &= ~STATUS_ENABLED;
897 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
898 state ? "DISABLED" : "ENABLED");
903 /*********************************************************************
904 Procedure : sw_reset_and_clock
905 Purpose : Asserts s/w reset, asserts clock initialization
906 and waits for clock stabilization
907 ********************************************************************/
908 static int sw_reset_and_clock(struct ipw2100_priv *priv)
914 write_register(priv->net_dev, IPW_REG_RESET_REG,
915 IPW_AUX_HOST_RESET_REG_SW_RESET);
917 // wait for clock stabilization
918 for (i = 0; i < 1000; i++) {
919 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
921 // check clock ready bit
922 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
923 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
928 return -EIO; // TODO: better error value
930 /* set "initialization complete" bit to move adapter to
932 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
933 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
935 /* wait for clock stabilization */
936 for (i = 0; i < 10000; i++) {
937 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
939 /* check clock ready bit */
940 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
941 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
946 return -EIO; /* TODO: better error value */
948 /* set D0 standby bit */
949 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
950 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
951 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
956 /*********************************************************************
957 Procedure : ipw2100_download_firmware
958 Purpose : Initiaze adapter after power on.
960 1. assert s/w reset first!
961 2. awake clocks & wait for clock stabilization
962 3. hold ARC (don't ask me why...)
963 4. load Dino ucode and reset/clock init again
964 5. zero-out shared mem
966 *******************************************************************/
967 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
973 /* Fetch the firmware and microcode */
974 struct ipw2100_fw ipw2100_firmware;
977 if (priv->fatal_error) {
978 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
979 "fatal error %d. Interface must be brought down.\n",
980 priv->net_dev->name, priv->fatal_error);
985 if (!ipw2100_firmware.version) {
986 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
988 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
989 priv->net_dev->name, err);
990 priv->fatal_error = IPW2100_ERR_FW_LOAD;
995 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
997 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
998 priv->net_dev->name, err);
999 priv->fatal_error = IPW2100_ERR_FW_LOAD;
1003 priv->firmware_version = ipw2100_firmware.version;
1005 /* s/w reset and clock stabilization */
1006 err = sw_reset_and_clock(priv);
1008 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1009 priv->net_dev->name, err);
1013 err = ipw2100_verify(priv);
1015 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1016 priv->net_dev->name, err);
1021 write_nic_dword(priv->net_dev,
1022 IPW_INTERNAL_REGISTER_HALT_AND_RESET,
1025 /* allow ARC to run */
1026 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1028 /* load microcode */
1029 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1031 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1032 priv->net_dev->name, err);
1037 write_nic_dword(priv->net_dev,
1038 IPW_INTERNAL_REGISTER_HALT_AND_RESET,
1041 /* s/w reset and clock stabilization (again!!!) */
1042 err = sw_reset_and_clock(priv);
1044 printk(KERN_ERR DRV_NAME ": %s: sw_reset_and_clock failed: %d\n",
1045 priv->net_dev->name, err);
1050 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1052 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1053 priv->net_dev->name, err);
1059 * When the .resume method of the driver is called, the other
1060 * part of the system, i.e. the ide driver could still stay in
1061 * the suspend stage. This prevents us from loading the firmware
1062 * from the disk. --YZ
1065 /* free any storage allocated for firmware image */
1066 ipw2100_release_firmware(priv, &ipw2100_firmware);
1069 /* zero out Domain 1 area indirectly (Si requirement) */
1070 for (address = IPW_HOST_FW_SHARED_AREA0;
1071 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1072 write_nic_dword(priv->net_dev, address, 0);
1073 for (address = IPW_HOST_FW_SHARED_AREA1;
1074 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1075 write_nic_dword(priv->net_dev, address, 0);
1076 for (address = IPW_HOST_FW_SHARED_AREA2;
1077 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1078 write_nic_dword(priv->net_dev, address, 0);
1079 for (address = IPW_HOST_FW_SHARED_AREA3;
1080 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1081 write_nic_dword(priv->net_dev, address, 0);
1082 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1083 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1084 write_nic_dword(priv->net_dev, address, 0);
1089 ipw2100_release_firmware(priv, &ipw2100_firmware);
1093 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1095 if (priv->status & STATUS_INT_ENABLED)
1097 priv->status |= STATUS_INT_ENABLED;
1098 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1101 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1103 if (!(priv->status & STATUS_INT_ENABLED))
1105 priv->status &= ~STATUS_INT_ENABLED;
1106 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1110 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1112 struct ipw2100_ordinals *ord = &priv->ordinals;
1114 IPW_DEBUG_INFO("enter\n");
1116 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1119 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1122 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1123 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1125 ord->table2_size &= 0x0000FFFF;
1127 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1128 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1129 IPW_DEBUG_INFO("exit\n");
1132 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1136 * Set GPIO 3 writable by FW; GPIO 1 writable
1137 * by driver and enable clock
1139 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1140 IPW_BIT_GPIO_LED_OFF);
1141 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1144 static inline int rf_kill_active(struct ipw2100_priv *priv)
1146 #define MAX_RF_KILL_CHECKS 5
1147 #define RF_KILL_CHECK_DELAY 40
1149 unsigned short value = 0;
1153 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1154 priv->status &= ~STATUS_RF_KILL_HW;
1158 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1159 udelay(RF_KILL_CHECK_DELAY);
1160 read_register(priv->net_dev, IPW_REG_GPIO, ®);
1161 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1165 priv->status |= STATUS_RF_KILL_HW;
1167 priv->status &= ~STATUS_RF_KILL_HW;
1169 return (value == 0);
1172 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1178 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1181 if (ipw2100_get_ordinal(
1182 priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
1184 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1189 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1192 * EEPROM version is the byte at offset 0xfd in firmware
1193 * We read 4 bytes, then shift out the byte we actually want */
1194 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1195 priv->eeprom_version = (val >> 24) & 0xFF;
1196 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1199 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1201 * notice that the EEPROM bit is reverse polarity, i.e.
1202 * bit = 0 signifies HW RF kill switch is supported
1203 * bit = 1 signifies HW RF kill switch is NOT supported
1205 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1206 if (!((val >> 24) & 0x01))
1207 priv->hw_features |= HW_FEATURE_RFKILL;
1209 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1210 (priv->hw_features & HW_FEATURE_RFKILL) ?
1217 * Start firmware execution after power on and intialization
1220 * 2. Wait for f/w initialization completes;
1222 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1225 u32 inta, inta_mask, gpio;
1227 IPW_DEBUG_INFO("enter\n");
1229 if (priv->status & STATUS_RUNNING)
1233 * Initialize the hw - drive adapter to DO state by setting
1234 * init_done bit. Wait for clk_ready bit and Download
1237 if (ipw2100_download_firmware(priv)) {
1238 printk(KERN_ERR DRV_NAME ": %s: Failed to power on the adapter.\n",
1239 priv->net_dev->name);
1243 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1244 * in the firmware RBD and TBD ring queue */
1245 ipw2100_queues_initialize(priv);
1247 ipw2100_hw_set_gpio(priv);
1249 /* TODO -- Look at disabling interrupts here to make sure none
1250 * get fired during FW initialization */
1252 /* Release ARC - clear reset bit */
1253 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1255 /* wait for f/w intialization complete */
1256 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1259 set_current_state(TASK_UNINTERRUPTIBLE);
1260 schedule_timeout(40 * HZ / 1000);
1261 /* Todo... wait for sync command ... */
1263 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1265 /* check "init done" bit */
1266 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1267 /* reset "init done" bit */
1268 write_register(priv->net_dev, IPW_REG_INTA,
1269 IPW2100_INTA_FW_INIT_DONE);
1273 /* check error conditions : we check these after the firmware
1274 * check so that if there is an error, the interrupt handler
1275 * will see it and the adapter will be reset */
1277 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1278 /* clear error conditions */
1279 write_register(priv->net_dev, IPW_REG_INTA,
1280 IPW2100_INTA_FATAL_ERROR |
1281 IPW2100_INTA_PARITY_ERROR);
1285 /* Clear out any pending INTAs since we aren't supposed to have
1286 * interrupts enabled at this point... */
1287 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1288 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1289 inta &= IPW_INTERRUPT_MASK;
1290 /* Clear out any pending interrupts */
1291 if (inta & inta_mask)
1292 write_register(priv->net_dev, IPW_REG_INTA, inta);
1294 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1295 i ? "SUCCESS" : "FAILED");
1298 printk(KERN_WARNING DRV_NAME ": %s: Firmware did not initialize.\n",
1299 priv->net_dev->name);
1303 /* allow firmware to write to GPIO1 & GPIO3 */
1304 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1306 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1308 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1310 /* Ready to receive commands */
1311 priv->status |= STATUS_RUNNING;
1313 /* The adapter has been reset; we are not associated */
1314 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1316 IPW_DEBUG_INFO("exit\n");
1321 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1323 if (!priv->fatal_error)
1326 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1327 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1328 priv->fatal_error = 0;
1332 /* NOTE: Our interrupt is disabled when this method is called */
1333 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1338 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1340 ipw2100_hw_set_gpio(priv);
1342 /* Step 1. Stop Master Assert */
1343 write_register(priv->net_dev, IPW_REG_RESET_REG,
1344 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1346 /* Step 2. Wait for stop Master Assert
1347 * (not more then 50us, otherwise ret error */
1350 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1351 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1353 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1357 priv->status &= ~STATUS_RESET_PENDING;
1360 IPW_DEBUG_INFO("exit - waited too long for master assert stop\n");
1364 write_register(priv->net_dev, IPW_REG_RESET_REG,
1365 IPW_AUX_HOST_RESET_REG_SW_RESET);
1368 /* Reset any fatal_error conditions */
1369 ipw2100_reset_fatalerror(priv);
1371 /* At this point, the adapter is now stopped and disabled */
1372 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1373 STATUS_ASSOCIATED | STATUS_ENABLED);
1379 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1381 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1383 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1384 * if STATUS_ASSN_LOST is sent.
1386 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1389 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1391 struct host_command cmd = {
1392 .host_command = CARD_DISABLE_PHY_OFF,
1393 .host_command_sequence = 0,
1394 .host_command_length = 0,
1399 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1401 /* Turn off the radio */
1402 err = ipw2100_hw_send_command(priv, &cmd);
1406 for (i = 0; i < 2500; i++) {
1407 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1408 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1410 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1411 (val2 & IPW2100_COMMAND_PHY_OFF))
1414 set_current_state(TASK_UNINTERRUPTIBLE);
1415 schedule_timeout(HW_PHY_OFF_LOOP_DELAY);
1422 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1424 struct host_command cmd = {
1425 .host_command = HOST_COMPLETE,
1426 .host_command_sequence = 0,
1427 .host_command_length = 0
1431 IPW_DEBUG_HC("HOST_COMPLETE\n");
1433 if (priv->status & STATUS_ENABLED)
1436 down(&priv->adapter_sem);
1438 if (rf_kill_active(priv)) {
1439 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1443 err = ipw2100_hw_send_command(priv, &cmd);
1445 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1449 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1452 "%s: card not responding to init command.\n",
1453 priv->net_dev->name);
1457 if (priv->stop_hang_check) {
1458 priv->stop_hang_check = 0;
1459 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
1463 up(&priv->adapter_sem);
1467 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1469 #define HW_POWER_DOWN_DELAY (HZ / 10)
1471 struct host_command cmd = {
1472 .host_command = HOST_PRE_POWER_DOWN,
1473 .host_command_sequence = 0,
1474 .host_command_length = 0,
1479 if (!(priv->status & STATUS_RUNNING))
1482 priv->status |= STATUS_STOPPING;
1484 /* We can only shut down the card if the firmware is operational. So,
1485 * if we haven't reset since a fatal_error, then we can not send the
1486 * shutdown commands. */
1487 if (!priv->fatal_error) {
1488 /* First, make sure the adapter is enabled so that the PHY_OFF
1489 * command can shut it down */
1490 ipw2100_enable_adapter(priv);
1492 err = ipw2100_hw_phy_off(priv);
1494 printk(KERN_WARNING DRV_NAME ": Error disabling radio %d\n", err);
1497 * If in D0-standby mode going directly to D3 may cause a
1498 * PCI bus violation. Therefore we must change out of the D0
1501 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1502 * hardware from going into standby mode and will transition
1503 * out of D0-standy if it is already in that state.
1505 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1506 * driver upon completion. Once received, the driver can
1507 * proceed to the D3 state.
1509 * Prepare for power down command to fw. This command would
1510 * take HW out of D0-standby and prepare it for D3 state.
1512 * Currently FW does not support event notification for this
1513 * event. Therefore, skip waiting for it. Just wait a fixed
1516 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1518 err = ipw2100_hw_send_command(priv, &cmd);
1520 printk(KERN_WARNING DRV_NAME ": "
1521 "%s: Power down command failed: Error %d\n",
1522 priv->net_dev->name, err);
1524 set_current_state(TASK_UNINTERRUPTIBLE);
1525 schedule_timeout(HW_POWER_DOWN_DELAY);
1529 priv->status &= ~STATUS_ENABLED;
1532 * Set GPIO 3 writable by FW; GPIO 1 writable
1533 * by driver and enable clock
1535 ipw2100_hw_set_gpio(priv);
1538 * Power down adapter. Sequence:
1539 * 1. Stop master assert (RESET_REG[9]=1)
1540 * 2. Wait for stop master (RESET_REG[8]==1)
1541 * 3. S/w reset assert (RESET_REG[7] = 1)
1544 /* Stop master assert */
1545 write_register(priv->net_dev, IPW_REG_RESET_REG,
1546 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1548 /* wait stop master not more than 50 usec.
1549 * Otherwise return error. */
1550 for (i = 5; i > 0; i--) {
1553 /* Check master stop bit */
1554 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1556 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1561 printk(KERN_WARNING DRV_NAME
1562 ": %s: Could now power down adapter.\n",
1563 priv->net_dev->name);
1565 /* assert s/w reset */
1566 write_register(priv->net_dev, IPW_REG_RESET_REG,
1567 IPW_AUX_HOST_RESET_REG_SW_RESET);
1569 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1575 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1577 struct host_command cmd = {
1578 .host_command = CARD_DISABLE,
1579 .host_command_sequence = 0,
1580 .host_command_length = 0
1584 IPW_DEBUG_HC("CARD_DISABLE\n");
1586 if (!(priv->status & STATUS_ENABLED))
1589 /* Make sure we clear the associated state */
1590 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1592 if (!priv->stop_hang_check) {
1593 priv->stop_hang_check = 1;
1594 cancel_delayed_work(&priv->hang_check);
1597 down(&priv->adapter_sem);
1599 err = ipw2100_hw_send_command(priv, &cmd);
1601 printk(KERN_WARNING DRV_NAME ": exit - failed to send CARD_DISABLE command\n");
1605 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1607 printk(KERN_WARNING DRV_NAME ": exit - card failed to change to DISABLED\n");
1611 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1614 up(&priv->adapter_sem);
1618 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1620 struct host_command cmd = {
1621 .host_command = SET_SCAN_OPTIONS,
1622 .host_command_sequence = 0,
1623 .host_command_length = 8
1627 IPW_DEBUG_INFO("enter\n");
1629 IPW_DEBUG_SCAN("setting scan options\n");
1631 cmd.host_command_parameters[0] = 0;
1633 if (!(priv->config & CFG_ASSOCIATE))
1634 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1635 if ((priv->sec.flags & SEC_ENABLED) && priv->sec.enabled)
1636 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1637 if (priv->config & CFG_PASSIVE_SCAN)
1638 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1640 cmd.host_command_parameters[1] = priv->channel_mask;
1642 err = ipw2100_hw_send_command(priv, &cmd);
1644 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1645 cmd.host_command_parameters[0]);
1650 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1652 struct host_command cmd = {
1653 .host_command = BROADCAST_SCAN,
1654 .host_command_sequence = 0,
1655 .host_command_length = 4
1659 IPW_DEBUG_HC("START_SCAN\n");
1661 cmd.host_command_parameters[0] = 0;
1663 /* No scanning if in monitor mode */
1664 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1667 if (priv->status & STATUS_SCANNING) {
1668 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1672 IPW_DEBUG_INFO("enter\n");
1674 /* Not clearing here; doing so makes iwlist always return nothing...
1676 * We should modify the table logic to use aging tables vs. clearing
1677 * the table on each scan start.
1679 IPW_DEBUG_SCAN("starting scan\n");
1681 priv->status |= STATUS_SCANNING;
1682 err = ipw2100_hw_send_command(priv, &cmd);
1684 priv->status &= ~STATUS_SCANNING;
1686 IPW_DEBUG_INFO("exit\n");
1691 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1693 unsigned long flags;
1696 u32 ord_len = sizeof(lock);
1698 /* Quite if manually disabled. */
1699 if (priv->status & STATUS_RF_KILL_SW) {
1700 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1701 "switch\n", priv->net_dev->name);
1705 /* If the interrupt is enabled, turn it off... */
1706 spin_lock_irqsave(&priv->low_lock, flags);
1707 ipw2100_disable_interrupts(priv);
1709 /* Reset any fatal_error conditions */
1710 ipw2100_reset_fatalerror(priv);
1711 spin_unlock_irqrestore(&priv->low_lock, flags);
1713 if (priv->status & STATUS_POWERED ||
1714 (priv->status & STATUS_RESET_PENDING)) {
1715 /* Power cycle the card ... */
1716 if (ipw2100_power_cycle_adapter(priv)) {
1717 printk(KERN_WARNING DRV_NAME ": %s: Could not cycle adapter.\n",
1718 priv->net_dev->name);
1723 priv->status |= STATUS_POWERED;
1725 /* Load the firmware, start the clocks, etc. */
1726 if (ipw2100_start_adapter(priv)) {
1727 printk(KERN_ERR DRV_NAME ": %s: Failed to start the firmware.\n",
1728 priv->net_dev->name);
1733 ipw2100_initialize_ordinals(priv);
1735 /* Determine capabilities of this particular HW configuration */
1736 if (ipw2100_get_hw_features(priv)) {
1737 printk(KERN_ERR DRV_NAME ": %s: Failed to determine HW features.\n",
1738 priv->net_dev->name);
1744 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1745 printk(KERN_ERR DRV_NAME ": %s: Failed to clear ordinal lock.\n",
1746 priv->net_dev->name);
1751 priv->status &= ~STATUS_SCANNING;
1753 if (rf_kill_active(priv)) {
1754 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1755 priv->net_dev->name);
1757 if (priv->stop_rf_kill) {
1758 priv->stop_rf_kill = 0;
1759 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
1765 /* Turn on the interrupt so that commands can be processed */
1766 ipw2100_enable_interrupts(priv);
1768 /* Send all of the commands that must be sent prior to
1770 if (ipw2100_adapter_setup(priv)) {
1771 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1772 priv->net_dev->name);
1778 /* Enable the adapter - sends HOST_COMPLETE */
1779 if (ipw2100_enable_adapter(priv)) {
1780 printk(KERN_ERR DRV_NAME ": "
1781 "%s: failed in call to enable adapter.\n",
1782 priv->net_dev->name);
1783 ipw2100_hw_stop_adapter(priv);
1789 /* Start a scan . . . */
1790 ipw2100_set_scan_options(priv);
1791 ipw2100_start_scan(priv);
1798 /* Called by register_netdev() */
1799 static int ipw2100_net_init(struct net_device *dev)
1801 struct ipw2100_priv *priv = ieee80211_priv(dev);
1802 return ipw2100_up(priv, 1);
1805 static void ipw2100_down(struct ipw2100_priv *priv)
1807 unsigned long flags;
1808 union iwreq_data wrqu = {
1810 .sa_family = ARPHRD_ETHER
1813 int associated = priv->status & STATUS_ASSOCIATED;
1815 /* Kill the RF switch timer */
1816 if (!priv->stop_rf_kill) {
1817 priv->stop_rf_kill = 1;
1818 cancel_delayed_work(&priv->rf_kill);
1821 /* Kill the firmare hang check timer */
1822 if (!priv->stop_hang_check) {
1823 priv->stop_hang_check = 1;
1824 cancel_delayed_work(&priv->hang_check);
1827 /* Kill any pending resets */
1828 if (priv->status & STATUS_RESET_PENDING)
1829 cancel_delayed_work(&priv->reset_work);
1831 /* Make sure the interrupt is on so that FW commands will be
1832 * processed correctly */
1833 spin_lock_irqsave(&priv->low_lock, flags);
1834 ipw2100_enable_interrupts(priv);
1835 spin_unlock_irqrestore(&priv->low_lock, flags);
1837 if (ipw2100_hw_stop_adapter(priv))
1838 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1839 priv->net_dev->name);
1841 /* Do not disable the interrupt until _after_ we disable
1842 * the adaptor. Otherwise the CARD_DISABLE command will never
1843 * be ack'd by the firmware */
1844 spin_lock_irqsave(&priv->low_lock, flags);
1845 ipw2100_disable_interrupts(priv);
1846 spin_unlock_irqrestore(&priv->low_lock, flags);
1848 #ifdef ACPI_CSTATE_LIMIT_DEFINED
1849 if (priv->config & CFG_C3_DISABLED) {
1850 IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
1851 acpi_set_cstate_limit(priv->cstate_limit);
1852 priv->config &= ~CFG_C3_DISABLED;
1856 /* We have to signal any supplicant if we are disassociating */
1858 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1860 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1861 netif_carrier_off(priv->net_dev);
1862 netif_stop_queue(priv->net_dev);
1865 static void ipw2100_reset_adapter(struct ipw2100_priv *priv)
1867 unsigned long flags;
1868 union iwreq_data wrqu = {
1870 .sa_family = ARPHRD_ETHER
1873 int associated = priv->status & STATUS_ASSOCIATED;
1875 spin_lock_irqsave(&priv->low_lock, flags);
1876 IPW_DEBUG_INFO(DRV_NAME ": %s: Restarting adapter.\n",
1877 priv->net_dev->name);
1879 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1880 priv->status |= STATUS_SECURITY_UPDATED;
1882 /* Force a power cycle even if interface hasn't been opened
1884 cancel_delayed_work(&priv->reset_work);
1885 priv->status |= STATUS_RESET_PENDING;
1886 spin_unlock_irqrestore(&priv->low_lock, flags);
1888 down(&priv->action_sem);
1889 /* stop timed checks so that they don't interfere with reset */
1890 priv->stop_hang_check = 1;
1891 cancel_delayed_work(&priv->hang_check);
1893 /* We have to signal any supplicant if we are disassociating */
1895 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1897 ipw2100_up(priv, 0);
1898 up(&priv->action_sem);
1903 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
1906 #define MAC_ASSOCIATION_READ_DELAY (HZ)
1907 int ret, len, essid_len;
1908 char essid[IW_ESSID_MAX_SIZE];
1915 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
1916 * an actual MAC of the AP. Seems like FW sets this
1917 * address too late. Read it later and expose through
1918 * /proc or schedule a later task to query and update
1921 essid_len = IW_ESSID_MAX_SIZE;
1922 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
1925 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1931 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE,
1934 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1940 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
1942 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1947 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
1949 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1953 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
1957 case TX_RATE_1_MBIT:
1958 txratename = "1Mbps";
1960 case TX_RATE_2_MBIT:
1961 txratename = "2Mbsp";
1963 case TX_RATE_5_5_MBIT:
1964 txratename = "5.5Mbps";
1966 case TX_RATE_11_MBIT:
1967 txratename = "11Mbps";
1970 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
1971 txratename = "unknown rate";
1975 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
1977 priv->net_dev->name, escape_essid(essid, essid_len),
1978 txratename, chan, MAC_ARG(bssid));
1980 /* now we copy read ssid into dev */
1981 if (!(priv->config & CFG_STATIC_ESSID)) {
1982 priv->essid_len = min((u8)essid_len, (u8)IW_ESSID_MAX_SIZE);
1983 memcpy(priv->essid, essid, priv->essid_len);
1985 priv->channel = chan;
1986 memcpy(priv->bssid, bssid, ETH_ALEN);
1988 priv->status |= STATUS_ASSOCIATING;
1989 priv->connect_start = get_seconds();
1991 queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
1995 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
1996 int length, int batch_mode)
1998 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
1999 struct host_command cmd = {
2000 .host_command = SSID,
2001 .host_command_sequence = 0,
2002 .host_command_length = ssid_len
2006 IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
2009 memcpy((char*)cmd.host_command_parameters,
2013 err = ipw2100_disable_adapter(priv);
2018 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
2019 * disable auto association -- so we cheat by setting a bogus SSID */
2020 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2022 u8 *bogus = (u8*)cmd.host_command_parameters;
2023 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2024 bogus[i] = 0x18 + i;
2025 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2028 /* NOTE: We always send the SSID command even if the provided ESSID is
2029 * the same as what we currently think is set. */
2031 err = ipw2100_hw_send_command(priv, &cmd);
2033 memset(priv->essid + ssid_len, 0,
2034 IW_ESSID_MAX_SIZE - ssid_len);
2035 memcpy(priv->essid, essid, ssid_len);
2036 priv->essid_len = ssid_len;
2040 if (ipw2100_enable_adapter(priv))
2047 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2049 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2050 "disassociated: '%s' " MAC_FMT " \n",
2051 escape_essid(priv->essid, priv->essid_len),
2052 MAC_ARG(priv->bssid));
2054 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2056 if (priv->status & STATUS_STOPPING) {
2057 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2061 memset(priv->bssid, 0, ETH_ALEN);
2062 memset(priv->ieee->bssid, 0, ETH_ALEN);
2064 netif_carrier_off(priv->net_dev);
2065 netif_stop_queue(priv->net_dev);
2067 if (!(priv->status & STATUS_RUNNING))
2070 if (priv->status & STATUS_SECURITY_UPDATED)
2071 queue_work(priv->workqueue, &priv->security_work);
2073 queue_work(priv->workqueue, &priv->wx_event_work);
2076 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2078 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2079 priv->net_dev->name);
2081 /* RF_KILL is now enabled (else we wouldn't be here) */
2082 priv->status |= STATUS_RF_KILL_HW;
2084 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2085 if (priv->config & CFG_C3_DISABLED) {
2086 IPW_DEBUG_INFO(DRV_NAME ": Resetting C3 transitions.\n");
2087 acpi_set_cstate_limit(priv->cstate_limit);
2088 priv->config &= ~CFG_C3_DISABLED;
2092 /* Make sure the RF Kill check timer is running */
2093 priv->stop_rf_kill = 0;
2094 cancel_delayed_work(&priv->rf_kill);
2095 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
2098 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2100 IPW_DEBUG_SCAN("scan complete\n");
2101 /* Age the scan results... */
2102 priv->ieee->scans++;
2103 priv->status &= ~STATUS_SCANNING;
2106 #ifdef CONFIG_IPW_DEBUG
2107 #define IPW2100_HANDLER(v, f) { v, f, # v }
2108 struct ipw2100_status_indicator {
2110 void (*cb)(struct ipw2100_priv *priv, u32 status);
2114 #define IPW2100_HANDLER(v, f) { v, f }
2115 struct ipw2100_status_indicator {
2117 void (*cb)(struct ipw2100_priv *priv, u32 status);
2119 #endif /* CONFIG_IPW_DEBUG */
2121 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2123 IPW_DEBUG_SCAN("Scanning...\n");
2124 priv->status |= STATUS_SCANNING;
2127 static const struct ipw2100_status_indicator status_handlers[] = {
2128 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2129 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2130 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2131 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2132 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2133 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2134 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2135 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2136 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2137 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2138 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2139 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2140 IPW2100_HANDLER(-1, NULL)
2144 static void isr_status_change(struct ipw2100_priv *priv, int status)
2148 if (status == IPW_STATE_SCANNING &&
2149 priv->status & STATUS_ASSOCIATED &&
2150 !(priv->status & STATUS_SCANNING)) {
2151 IPW_DEBUG_INFO("Scan detected while associated, with "
2152 "no scan request. Restarting firmware.\n");
2154 /* Wake up any sleeping jobs */
2155 schedule_reset(priv);
2158 for (i = 0; status_handlers[i].status != -1; i++) {
2159 if (status == status_handlers[i].status) {
2160 IPW_DEBUG_NOTIF("Status change: %s\n",
2161 status_handlers[i].name);
2162 if (status_handlers[i].cb)
2163 status_handlers[i].cb(priv, status);
2164 priv->wstats.status = status;
2169 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2172 static void isr_rx_complete_command(
2173 struct ipw2100_priv *priv,
2174 struct ipw2100_cmd_header *cmd)
2176 #ifdef CONFIG_IPW_DEBUG
2177 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2178 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2179 command_types[cmd->host_command_reg],
2180 cmd->host_command_reg);
2183 if (cmd->host_command_reg == HOST_COMPLETE)
2184 priv->status |= STATUS_ENABLED;
2186 if (cmd->host_command_reg == CARD_DISABLE)
2187 priv->status &= ~STATUS_ENABLED;
2189 priv->status &= ~STATUS_CMD_ACTIVE;
2191 wake_up_interruptible(&priv->wait_command_queue);
2194 #ifdef CONFIG_IPW_DEBUG
2195 static const char *frame_types[] = {
2196 "COMMAND_STATUS_VAL",
2197 "STATUS_CHANGE_VAL",
2200 "HOST_NOTIFICATION_VAL"
2205 static inline int ipw2100_alloc_skb(
2206 struct ipw2100_priv *priv,
2207 struct ipw2100_rx_packet *packet)
2209 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2213 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2214 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2215 sizeof(struct ipw2100_rx),
2216 PCI_DMA_FROMDEVICE);
2217 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2224 #define SEARCH_ERROR 0xffffffff
2225 #define SEARCH_FAIL 0xfffffffe
2226 #define SEARCH_SUCCESS 0xfffffff0
2227 #define SEARCH_DISCARD 0
2228 #define SEARCH_SNAPSHOT 1
2230 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2231 static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2234 if (priv->snapshot[0])
2236 for (i = 0; i < 0x30; i++) {
2237 priv->snapshot[i] = (u8*)kmalloc(0x1000, GFP_ATOMIC);
2238 if (!priv->snapshot[i]) {
2239 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2240 "buffer %d\n", priv->net_dev->name, i);
2242 kfree(priv->snapshot[--i]);
2243 priv->snapshot[0] = NULL;
2251 static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2254 if (!priv->snapshot[0])
2256 for (i = 0; i < 0x30; i++)
2257 kfree(priv->snapshot[i]);
2258 priv->snapshot[0] = NULL;
2261 static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 *in_buf,
2262 size_t len, int mode)
2270 if (mode == SEARCH_SNAPSHOT) {
2271 if (!ipw2100_snapshot_alloc(priv))
2272 mode = SEARCH_DISCARD;
2275 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2276 read_nic_dword(priv->net_dev, i, &tmp);
2277 if (mode == SEARCH_SNAPSHOT)
2278 *(u32 *)SNAPSHOT_ADDR(i) = tmp;
2279 if (ret == SEARCH_FAIL) {
2281 for (j = 0; j < 4; j++) {
2290 if ((s - in_buf) == len)
2291 ret = (i + j) - len + 1;
2293 } else if (mode == SEARCH_DISCARD)
2302 * 0) Disconnect the SKB from the firmware (just unmap)
2303 * 1) Pack the ETH header into the SKB
2304 * 2) Pass the SKB to the network stack
2306 * When packet is provided by the firmware, it contains the following:
2309 * . ieee80211_snap_hdr
2311 * The size of the constructed ethernet
2314 #ifdef CONFIG_IPW2100_RX_DEBUG
2315 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2318 static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv,
2321 #ifdef CONFIG_IPW_DEBUG_C3
2322 struct ipw2100_status *status = &priv->status_queue.drv[i];
2326 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2330 IPW_DEBUG_INFO(DRV_NAME ": PCI latency error detected at "
2331 "0x%04zX.\n", i * sizeof(struct ipw2100_status));
2333 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2334 IPW_DEBUG_INFO(DRV_NAME ": Disabling C3 transitions.\n");
2335 limit = acpi_get_cstate_limit();
2337 priv->cstate_limit = limit;
2338 acpi_set_cstate_limit(2);
2339 priv->config |= CFG_C3_DISABLED;
2343 #ifdef CONFIG_IPW_DEBUG_C3
2344 /* Halt the fimrware so we can get a good image */
2345 write_register(priv->net_dev, IPW_REG_RESET_REG,
2346 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2349 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2350 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
2352 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2356 match = ipw2100_match_buf(priv, (u8*)status,
2357 sizeof(struct ipw2100_status),
2359 if (match < SEARCH_SUCCESS)
2360 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2361 "offset 0x%06X, length %d:\n",
2362 priv->net_dev->name, match,
2363 sizeof(struct ipw2100_status));
2365 IPW_DEBUG_INFO("%s: No DMA status match in "
2366 "Firmware.\n", priv->net_dev->name);
2368 printk_buf((u8*)priv->status_queue.drv,
2369 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2372 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2373 priv->ieee->stats.rx_errors++;
2374 schedule_reset(priv);
2377 static inline void isr_rx(struct ipw2100_priv *priv, int i,
2378 struct ieee80211_rx_stats *stats)
2380 struct ipw2100_status *status = &priv->status_queue.drv[i];
2381 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2383 IPW_DEBUG_RX("Handler...\n");
2385 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2386 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2388 priv->net_dev->name,
2389 status->frame_size, skb_tailroom(packet->skb));
2390 priv->ieee->stats.rx_errors++;
2394 if (unlikely(!netif_running(priv->net_dev))) {
2395 priv->ieee->stats.rx_errors++;
2396 priv->wstats.discard.misc++;
2397 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2401 if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR &&
2402 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2403 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2404 priv->ieee->stats.rx_errors++;
2408 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2409 !(priv->status & STATUS_ASSOCIATED))) {
2410 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2411 priv->wstats.discard.misc++;
2416 pci_unmap_single(priv->pci_dev,
2418 sizeof(struct ipw2100_rx),
2419 PCI_DMA_FROMDEVICE);
2421 skb_put(packet->skb, status->frame_size);
2423 #ifdef CONFIG_IPW2100_RX_DEBUG
2424 /* Make a copy of the frame so we can dump it to the logs if
2425 * ieee80211_rx fails */
2426 memcpy(packet_data, packet->skb->data,
2427 min_t(u32, status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
2430 if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
2431 #ifdef CONFIG_IPW2100_RX_DEBUG
2432 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2433 priv->net_dev->name);
2434 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2436 priv->ieee->stats.rx_errors++;
2438 /* ieee80211_rx failed, so it didn't free the SKB */
2439 dev_kfree_skb_any(packet->skb);
2443 /* We need to allocate a new SKB and attach it to the RDB. */
2444 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2445 printk(KERN_WARNING DRV_NAME ": "
2446 "%s: Unable to allocate SKB onto RBD ring - disabling "
2447 "adapter.\n", priv->net_dev->name);
2448 /* TODO: schedule adapter shutdown */
2449 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2452 /* Update the RDB entry */
2453 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2456 static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2458 struct ipw2100_status *status = &priv->status_queue.drv[i];
2459 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2460 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2462 switch (frame_type) {
2463 case COMMAND_STATUS_VAL:
2464 return (status->frame_size != sizeof(u->rx_data.command));
2465 case STATUS_CHANGE_VAL:
2466 return (status->frame_size != sizeof(u->rx_data.status));
2467 case HOST_NOTIFICATION_VAL:
2468 return (status->frame_size < sizeof(u->rx_data.notification));
2469 case P80211_DATA_VAL:
2470 case P8023_DATA_VAL:
2471 #ifdef CONFIG_IPW2100_MONITOR
2474 switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
2475 case IEEE80211_FTYPE_MGMT:
2476 case IEEE80211_FTYPE_CTL:
2478 case IEEE80211_FTYPE_DATA:
2479 return (status->frame_size >
2480 IPW_MAX_802_11_PAYLOAD_LENGTH);
2489 * ipw2100 interrupts are disabled at this point, and the ISR
2490 * is the only code that calls this method. So, we do not need
2491 * to play with any locks.
2493 * RX Queue works as follows:
2495 * Read index - firmware places packet in entry identified by the
2496 * Read index and advances Read index. In this manner,
2497 * Read index will always point to the next packet to
2498 * be filled--but not yet valid.
2500 * Write index - driver fills this entry with an unused RBD entry.
2501 * This entry has not filled by the firmware yet.
2503 * In between the W and R indexes are the RBDs that have been received
2504 * but not yet processed.
2506 * The process of handling packets will start at WRITE + 1 and advance
2507 * until it reaches the READ index.
2509 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2512 static inline void __ipw2100_rx_process(struct ipw2100_priv *priv)
2514 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2515 struct ipw2100_status_queue *sq = &priv->status_queue;
2516 struct ipw2100_rx_packet *packet;
2519 struct ipw2100_rx *u;
2520 struct ieee80211_rx_stats stats = {
2521 .mac_time = jiffies,
2524 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2525 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2527 if (r >= rxq->entries) {
2528 IPW_DEBUG_RX("exit - bad read index\n");
2532 i = (rxq->next + 1) % rxq->entries;
2535 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2536 r, rxq->next, i); */
2538 packet = &priv->rx_buffers[i];
2540 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2541 * the correct values */
2542 pci_dma_sync_single_for_cpu(
2544 sq->nic + sizeof(struct ipw2100_status) * i,
2545 sizeof(struct ipw2100_status),
2546 PCI_DMA_FROMDEVICE);
2548 /* Sync the DMA for the RX buffer so CPU is sure to get
2549 * the correct values */
2550 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2551 sizeof(struct ipw2100_rx),
2552 PCI_DMA_FROMDEVICE);
2554 if (unlikely(ipw2100_corruption_check(priv, i))) {
2555 ipw2100_corruption_detected(priv, i);
2560 frame_type = sq->drv[i].status_fields &
2562 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2563 stats.len = sq->drv[i].frame_size;
2566 if (stats.rssi != 0)
2567 stats.mask |= IEEE80211_STATMASK_RSSI;
2568 stats.freq = IEEE80211_24GHZ_BAND;
2571 "%s: '%s' frame type received (%d).\n",
2572 priv->net_dev->name, frame_types[frame_type],
2575 switch (frame_type) {
2576 case COMMAND_STATUS_VAL:
2577 /* Reset Rx watchdog */
2578 isr_rx_complete_command(
2579 priv, &u->rx_data.command);
2582 case STATUS_CHANGE_VAL:
2583 isr_status_change(priv, u->rx_data.status);
2586 case P80211_DATA_VAL:
2587 case P8023_DATA_VAL:
2588 #ifdef CONFIG_IPW2100_MONITOR
2589 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2590 isr_rx(priv, i, &stats);
2594 if (stats.len < sizeof(u->rx_data.header))
2596 switch (WLAN_FC_GET_TYPE(u->rx_data.header.
2598 case IEEE80211_FTYPE_MGMT:
2599 ieee80211_rx_mgt(priv->ieee,
2604 case IEEE80211_FTYPE_CTL:
2607 case IEEE80211_FTYPE_DATA:
2608 isr_rx(priv, i, &stats);
2616 /* clear status field associated with this RBD */
2617 rxq->drv[i].status.info.field = 0;
2619 i = (i + 1) % rxq->entries;
2623 /* backtrack one entry, wrapping to end if at 0 */
2624 rxq->next = (i ? i : rxq->entries) - 1;
2626 write_register(priv->net_dev,
2627 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX,
2634 * __ipw2100_tx_process
2636 * This routine will determine whether the next packet on
2637 * the fw_pend_list has been processed by the firmware yet.
2639 * If not, then it does nothing and returns.
2641 * If so, then it removes the item from the fw_pend_list, frees
2642 * any associated storage, and places the item back on the
2643 * free list of its source (either msg_free_list or tx_free_list)
2645 * TX Queue works as follows:
2647 * Read index - points to the next TBD that the firmware will
2648 * process. The firmware will read the data, and once
2649 * done processing, it will advance the Read index.
2651 * Write index - driver fills this entry with an constructed TBD
2652 * entry. The Write index is not advanced until the
2653 * packet has been configured.
2655 * In between the W and R indexes are the TBDs that have NOT been
2656 * processed. Lagging behind the R index are packets that have
2657 * been processed but have not been freed by the driver.
2659 * In order to free old storage, an internal index will be maintained
2660 * that points to the next packet to be freed. When all used
2661 * packets have been freed, the oldest index will be the same as the
2662 * firmware's read index.
2664 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2666 * Because the TBD structure can not contain arbitrary data, the
2667 * driver must keep an internal queue of cached allocations such that
2668 * it can put that data back into the tx_free_list and msg_free_list
2669 * for use by future command and data packets.
2672 static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
2674 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2675 struct ipw2100_bd *tbd;
2676 struct list_head *element;
2677 struct ipw2100_tx_packet *packet;
2678 int descriptors_used;
2680 u32 r, w, frag_num = 0;
2682 if (list_empty(&priv->fw_pend_list))
2685 element = priv->fw_pend_list.next;
2687 packet = list_entry(element, struct ipw2100_tx_packet, list);
2688 tbd = &txq->drv[packet->index];
2690 /* Determine how many TBD entries must be finished... */
2691 switch (packet->type) {
2693 /* COMMAND uses only one slot; don't advance */
2694 descriptors_used = 1;
2699 /* DATA uses two slots; advance and loop position. */
2700 descriptors_used = tbd->num_fragments;
2701 frag_num = tbd->num_fragments - 1;
2702 e = txq->oldest + frag_num;
2707 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2708 priv->net_dev->name);
2712 /* if the last TBD is not done by NIC yet, then packet is
2713 * not ready to be released.
2716 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2718 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2721 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2722 priv->net_dev->name);
2725 * txq->next is the index of the last packet written txq->oldest is
2726 * the index of the r is the index of the next packet to be read by
2732 * Quick graphic to help you visualize the following
2733 * if / else statement
2735 * ===>| s---->|===============
2737 * | a | b | c | d | e | f | g | h | i | j | k | l
2741 * w - updated by driver
2742 * r - updated by firmware
2743 * s - start of oldest BD entry (txq->oldest)
2744 * e - end of oldest BD entry
2747 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2748 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2753 DEC_STAT(&priv->fw_pend_stat);
2755 #ifdef CONFIG_IPW_DEBUG
2757 int i = txq->oldest;
2759 "TX%d V=%p P=%04X T=%04X L=%d\n", i,
2761 (u32)(txq->nic + i * sizeof(struct ipw2100_bd)),
2762 txq->drv[i].host_addr,
2763 txq->drv[i].buf_length);
2765 if (packet->type == DATA) {
2766 i = (i + 1) % txq->entries;
2769 "TX%d V=%p P=%04X T=%04X L=%d\n", i,
2771 (u32)(txq->nic + i *
2772 sizeof(struct ipw2100_bd)),
2773 (u32)txq->drv[i].host_addr,
2774 txq->drv[i].buf_length);
2779 switch (packet->type) {
2781 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2782 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2783 "Expecting DATA TBD but pulled "
2784 "something else: ids %d=%d.\n",
2785 priv->net_dev->name, txq->oldest, packet->index);
2787 /* DATA packet; we have to unmap and free the SKB */
2788 priv->ieee->stats.tx_packets++;
2789 for (i = 0; i < frag_num; i++) {
2790 tbd = &txq->drv[(packet->index + 1 + i) %
2794 "TX%d P=%08x L=%d\n",
2795 (packet->index + 1 + i) % txq->entries,
2796 tbd->host_addr, tbd->buf_length);
2798 pci_unmap_single(priv->pci_dev,
2804 priv->ieee->stats.tx_bytes += packet->info.d_struct.txb->payload_size;
2805 ieee80211_txb_free(packet->info.d_struct.txb);
2806 packet->info.d_struct.txb = NULL;
2808 list_add_tail(element, &priv->tx_free_list);
2809 INC_STAT(&priv->tx_free_stat);
2811 /* We have a free slot in the Tx queue, so wake up the
2812 * transmit layer if it is stopped. */
2813 if (priv->status & STATUS_ASSOCIATED &&
2814 netif_queue_stopped(priv->net_dev)) {
2815 IPW_DEBUG_INFO(KERN_INFO
2816 "%s: Waking net queue.\n",
2817 priv->net_dev->name);
2818 netif_wake_queue(priv->net_dev);
2821 /* A packet was processed by the hardware, so update the
2823 priv->net_dev->trans_start = jiffies;
2828 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2829 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2830 "Expecting COMMAND TBD but pulled "
2831 "something else: ids %d=%d.\n",
2832 priv->net_dev->name, txq->oldest, packet->index);
2834 #ifdef CONFIG_IPW_DEBUG
2835 if (packet->info.c_struct.cmd->host_command_reg <
2836 sizeof(command_types) / sizeof(*command_types))
2838 "Command '%s (%d)' processed: %d.\n",
2839 command_types[packet->info.c_struct.cmd->host_command_reg],
2840 packet->info.c_struct.cmd->host_command_reg,
2841 packet->info.c_struct.cmd->cmd_status_reg);
2844 list_add_tail(element, &priv->msg_free_list);
2845 INC_STAT(&priv->msg_free_stat);
2849 /* advance oldest used TBD pointer to start of next entry */
2850 txq->oldest = (e + 1) % txq->entries;
2851 /* increase available TBDs number */
2852 txq->available += descriptors_used;
2853 SET_STAT(&priv->txq_stat, txq->available);
2855 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2856 jiffies - packet->jiffy_start);
2858 return (!list_empty(&priv->fw_pend_list));
2862 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
2866 while (__ipw2100_tx_process(priv) && i < 200) i++;
2869 printk(KERN_WARNING DRV_NAME ": "
2870 "%s: Driver is running slow (%d iters).\n",
2871 priv->net_dev->name, i);
2876 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
2878 struct list_head *element;
2879 struct ipw2100_tx_packet *packet;
2880 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2881 struct ipw2100_bd *tbd;
2882 int next = txq->next;
2884 while (!list_empty(&priv->msg_pend_list)) {
2885 /* if there isn't enough space in TBD queue, then
2886 * don't stuff a new one in.
2887 * NOTE: 3 are needed as a command will take one,
2888 * and there is a minimum of 2 that must be
2889 * maintained between the r and w indexes
2891 if (txq->available <= 3) {
2892 IPW_DEBUG_TX("no room in tx_queue\n");
2896 element = priv->msg_pend_list.next;
2898 DEC_STAT(&priv->msg_pend_stat);
2900 packet = list_entry(element,
2901 struct ipw2100_tx_packet, list);
2903 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
2904 &txq->drv[txq->next],
2905 (void*)(txq->nic + txq->next *
2906 sizeof(struct ipw2100_bd)));
2908 packet->index = txq->next;
2910 tbd = &txq->drv[txq->next];
2912 /* initialize TBD */
2913 tbd->host_addr = packet->info.c_struct.cmd_phys;
2914 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
2915 /* not marking number of fragments causes problems
2916 * with f/w debug version */
2917 tbd->num_fragments = 1;
2918 tbd->status.info.field =
2919 IPW_BD_STATUS_TX_FRAME_COMMAND |
2920 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
2922 /* update TBD queue counters */
2924 txq->next %= txq->entries;
2926 DEC_STAT(&priv->txq_stat);
2928 list_add_tail(element, &priv->fw_pend_list);
2929 INC_STAT(&priv->fw_pend_stat);
2932 if (txq->next != next) {
2933 /* kick off the DMA by notifying firmware the
2934 * write index has moved; make sure TBD stores are sync'd */
2936 write_register(priv->net_dev,
2937 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2944 * ipw2100_tx_send_data
2947 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
2949 struct list_head *element;
2950 struct ipw2100_tx_packet *packet;
2951 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2952 struct ipw2100_bd *tbd;
2953 int next = txq->next;
2955 struct ipw2100_data_header *ipw_hdr;
2956 struct ieee80211_hdr *hdr;
2958 while (!list_empty(&priv->tx_pend_list)) {
2959 /* if there isn't enough space in TBD queue, then
2960 * don't stuff a new one in.
2961 * NOTE: 4 are needed as a data will take two,
2962 * and there is a minimum of 2 that must be
2963 * maintained between the r and w indexes
2965 element = priv->tx_pend_list.next;
2966 packet = list_entry(element, struct ipw2100_tx_packet, list);
2968 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
2970 /* TODO: Support merging buffers if more than
2971 * IPW_MAX_BDS are used */
2973 "%s: Maximum BD theshold exceeded. "
2974 "Increase fragmentation level.\n",
2975 priv->net_dev->name);
2978 if (txq->available <= 3 +
2979 packet->info.d_struct.txb->nr_frags) {
2980 IPW_DEBUG_TX("no room in tx_queue\n");
2985 DEC_STAT(&priv->tx_pend_stat);
2987 tbd = &txq->drv[txq->next];
2989 packet->index = txq->next;
2991 ipw_hdr = packet->info.d_struct.data;
2992 hdr = (struct ieee80211_hdr *)packet->info.d_struct.txb->
2995 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
2996 /* To DS: Addr1 = BSSID, Addr2 = SA,
2998 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
2999 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
3000 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
3001 /* not From/To DS: Addr1 = DA, Addr2 = SA,
3003 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
3004 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
3007 ipw_hdr->host_command_reg = SEND;
3008 ipw_hdr->host_command_reg1 = 0;
3010 /* For now we only support host based encryption */
3011 ipw_hdr->needs_encryption = 0;
3012 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
3013 if (packet->info.d_struct.txb->nr_frags > 1)
3014 ipw_hdr->fragment_size =
3015 packet->info.d_struct.txb->frag_size - IEEE80211_3ADDR_LEN;
3017 ipw_hdr->fragment_size = 0;
3019 tbd->host_addr = packet->info.d_struct.data_phys;
3020 tbd->buf_length = sizeof(struct ipw2100_data_header);
3021 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
3022 tbd->status.info.field =
3023 IPW_BD_STATUS_TX_FRAME_802_3 |
3024 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3026 txq->next %= txq->entries;
3029 "data header tbd TX%d P=%08x L=%d\n",
3030 packet->index, tbd->host_addr,
3032 #ifdef CONFIG_IPW_DEBUG
3033 if (packet->info.d_struct.txb->nr_frags > 1)
3034 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
3035 packet->info.d_struct.txb->nr_frags);
3038 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
3039 tbd = &txq->drv[txq->next];
3040 if (i == packet->info.d_struct.txb->nr_frags - 1)
3041 tbd->status.info.field =
3042 IPW_BD_STATUS_TX_FRAME_802_3 |
3043 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
3045 tbd->status.info.field =
3046 IPW_BD_STATUS_TX_FRAME_802_3 |
3047 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
3049 tbd->buf_length = packet->info.d_struct.txb->
3050 fragments[i]->len - IEEE80211_3ADDR_LEN;
3052 tbd->host_addr = pci_map_single(
3054 packet->info.d_struct.txb->fragments[i]->data +
3055 IEEE80211_3ADDR_LEN,
3060 "data frag tbd TX%d P=%08x L=%d\n",
3061 txq->next, tbd->host_addr, tbd->buf_length);
3063 pci_dma_sync_single_for_device(
3064 priv->pci_dev, tbd->host_addr,
3069 txq->next %= txq->entries;
3072 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3073 SET_STAT(&priv->txq_stat, txq->available);
3075 list_add_tail(element, &priv->fw_pend_list);
3076 INC_STAT(&priv->fw_pend_stat);
3079 if (txq->next != next) {
3080 /* kick off the DMA by notifying firmware the
3081 * write index has moved; make sure TBD stores are sync'd */
3082 write_register(priv->net_dev,
3083 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3089 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3091 struct net_device *dev = priv->net_dev;
3092 unsigned long flags;
3095 spin_lock_irqsave(&priv->low_lock, flags);
3096 ipw2100_disable_interrupts(priv);
3098 read_register(dev, IPW_REG_INTA, &inta);
3100 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3101 (unsigned long)inta & IPW_INTERRUPT_MASK);
3106 /* We do not loop and keep polling for more interrupts as this
3107 * is frowned upon and doesn't play nicely with other potentially
3109 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3110 (unsigned long)inta & IPW_INTERRUPT_MASK);
3112 if (inta & IPW2100_INTA_FATAL_ERROR) {
3113 printk(KERN_WARNING DRV_NAME
3114 ": Fatal interrupt. Scheduling firmware restart.\n");
3118 IPW2100_INTA_FATAL_ERROR);
3120 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3121 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3122 priv->net_dev->name, priv->fatal_error);
3124 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3125 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3126 priv->net_dev->name, tmp);
3128 /* Wake up any sleeping jobs */
3129 schedule_reset(priv);
3132 if (inta & IPW2100_INTA_PARITY_ERROR) {
3133 printk(KERN_ERR DRV_NAME ": ***** PARITY ERROR INTERRUPT !!!! \n");
3137 IPW2100_INTA_PARITY_ERROR);
3140 if (inta & IPW2100_INTA_RX_TRANSFER) {
3141 IPW_DEBUG_ISR("RX interrupt\n");
3143 priv->rx_interrupts++;
3147 IPW2100_INTA_RX_TRANSFER);
3149 __ipw2100_rx_process(priv);
3150 __ipw2100_tx_complete(priv);
3153 if (inta & IPW2100_INTA_TX_TRANSFER) {
3154 IPW_DEBUG_ISR("TX interrupt\n");
3156 priv->tx_interrupts++;
3158 write_register(dev, IPW_REG_INTA,
3159 IPW2100_INTA_TX_TRANSFER);
3161 __ipw2100_tx_complete(priv);
3162 ipw2100_tx_send_commands(priv);
3163 ipw2100_tx_send_data(priv);
3166 if (inta & IPW2100_INTA_TX_COMPLETE) {
3167 IPW_DEBUG_ISR("TX complete\n");
3171 IPW2100_INTA_TX_COMPLETE);
3173 __ipw2100_tx_complete(priv);
3176 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3177 /* ipw2100_handle_event(dev); */
3181 IPW2100_INTA_EVENT_INTERRUPT);
3184 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3185 IPW_DEBUG_ISR("FW init done interrupt\n");
3188 read_register(dev, IPW_REG_INTA, &tmp);
3189 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3190 IPW2100_INTA_PARITY_ERROR)) {
3193 IPW2100_INTA_FATAL_ERROR |
3194 IPW2100_INTA_PARITY_ERROR);
3197 write_register(dev, IPW_REG_INTA,
3198 IPW2100_INTA_FW_INIT_DONE);
3201 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3202 IPW_DEBUG_ISR("Status change interrupt\n");
3206 IPW2100_INTA_STATUS_CHANGE);
3209 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3210 IPW_DEBUG_ISR("slave host mode interrupt\n");
3214 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3218 ipw2100_enable_interrupts(priv);
3220 spin_unlock_irqrestore(&priv->low_lock, flags);
3222 IPW_DEBUG_ISR("exit\n");
3226 static irqreturn_t ipw2100_interrupt(int irq, void *data,
3227 struct pt_regs *regs)
3229 struct ipw2100_priv *priv = data;
3230 u32 inta, inta_mask;
3235 spin_lock(&priv->low_lock);
3237 /* We check to see if we should be ignoring interrupts before
3238 * we touch the hardware. During ucode load if we try and handle
3239 * an interrupt we can cause keyboard problems as well as cause
3240 * the ucode to fail to initialize */
3241 if (!(priv->status & STATUS_INT_ENABLED)) {
3246 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3247 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3249 if (inta == 0xFFFFFFFF) {
3250 /* Hardware disappeared */
3251 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3255 inta &= IPW_INTERRUPT_MASK;
3257 if (!(inta & inta_mask)) {
3258 /* Shared interrupt */
3262 /* We disable the hardware interrupt here just to prevent unneeded
3263 * calls to be made. We disable this again within the actual
3264 * work tasklet, so if another part of the code re-enables the
3265 * interrupt, that is fine */
3266 ipw2100_disable_interrupts(priv);
3268 tasklet_schedule(&priv->irq_tasklet);
3269 spin_unlock(&priv->low_lock);
3273 spin_unlock(&priv->low_lock);
3277 static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev)
3279 struct ipw2100_priv *priv = ieee80211_priv(dev);
3280 struct list_head *element;
3281 struct ipw2100_tx_packet *packet;
3282 unsigned long flags;
3284 spin_lock_irqsave(&priv->low_lock, flags);
3286 if (!(priv->status & STATUS_ASSOCIATED)) {
3287 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3288 priv->ieee->stats.tx_carrier_errors++;
3289 netif_stop_queue(dev);
3293 if (list_empty(&priv->tx_free_list))
3296 element = priv->tx_free_list.next;
3297 packet = list_entry(element, struct ipw2100_tx_packet, list);
3299 packet->info.d_struct.txb = txb;
3301 IPW_DEBUG_TX("Sending fragment (%d bytes):\n",
3302 txb->fragments[0]->len);
3303 printk_buf(IPW_DL_TX, txb->fragments[0]->data,
3304 txb->fragments[0]->len);
3306 packet->jiffy_start = jiffies;
3309 DEC_STAT(&priv->tx_free_stat);
3311 list_add_tail(element, &priv->tx_pend_list);
3312 INC_STAT(&priv->tx_pend_stat);
3314 ipw2100_tx_send_data(priv);
3316 spin_unlock_irqrestore(&priv->low_lock, flags);
3320 netif_stop_queue(dev);
3321 spin_unlock_irqrestore(&priv->low_lock, flags);
3326 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3328 int i, j, err = -EINVAL;
3332 priv->msg_buffers = (struct ipw2100_tx_packet *)kmalloc(
3333 IPW_COMMAND_POOL_SIZE * sizeof(struct ipw2100_tx_packet),
3335 if (!priv->msg_buffers) {
3336 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3337 "buffers.\n", priv->net_dev->name);
3341 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3342 v = pci_alloc_consistent(
3344 sizeof(struct ipw2100_cmd_header),
3347 printk(KERN_ERR DRV_NAME ": "
3348 "%s: PCI alloc failed for msg "
3350 priv->net_dev->name);
3355 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3357 priv->msg_buffers[i].type = COMMAND;
3358 priv->msg_buffers[i].info.c_struct.cmd =
3359 (struct ipw2100_cmd_header*)v;
3360 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3363 if (i == IPW_COMMAND_POOL_SIZE)
3366 for (j = 0; j < i; j++) {
3367 pci_free_consistent(
3369 sizeof(struct ipw2100_cmd_header),
3370 priv->msg_buffers[j].info.c_struct.cmd,
3371 priv->msg_buffers[j].info.c_struct.cmd_phys);
3374 kfree(priv->msg_buffers);
3375 priv->msg_buffers = NULL;
3380 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3384 INIT_LIST_HEAD(&priv->msg_free_list);
3385 INIT_LIST_HEAD(&priv->msg_pend_list);
3387 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3388 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3389 SET_STAT(&priv->msg_free_stat, i);
3394 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3398 if (!priv->msg_buffers)
3401 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3402 pci_free_consistent(priv->pci_dev,
3403 sizeof(struct ipw2100_cmd_header),
3404 priv->msg_buffers[i].info.c_struct.cmd,
3405 priv->msg_buffers[i].info.c_struct.cmd_phys);
3408 kfree(priv->msg_buffers);
3409 priv->msg_buffers = NULL;
3412 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3415 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3420 for (i = 0; i < 16; i++) {
3421 out += sprintf(out, "[%08X] ", i * 16);
3422 for (j = 0; j < 16; j += 4) {
3423 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3424 out += sprintf(out, "%08X ", val);
3426 out += sprintf(out, "\n");
3431 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3433 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3436 struct ipw2100_priv *p = d->driver_data;
3437 return sprintf(buf, "0x%08x\n", (int)p->config);
3439 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3441 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3444 struct ipw2100_priv *p = d->driver_data;
3445 return sprintf(buf, "0x%08x\n", (int)p->status);
3447 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3449 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3452 struct ipw2100_priv *p = d->driver_data;
3453 return sprintf(buf, "0x%08x\n", (int)p->capability);
3455 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3458 #define IPW2100_REG(x) { IPW_ ##x, #x }
3459 static const struct {
3463 IPW2100_REG(REG_GP_CNTRL),
3464 IPW2100_REG(REG_GPIO),
3465 IPW2100_REG(REG_INTA),
3466 IPW2100_REG(REG_INTA_MASK),
3467 IPW2100_REG(REG_RESET_REG),
3469 #define IPW2100_NIC(x, s) { x, #x, s }
3470 static const struct {
3475 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3476 IPW2100_NIC(0x210014, 1),
3477 IPW2100_NIC(0x210000, 1),
3479 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3480 static const struct {
3485 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3486 IPW2100_ORD(STAT_TX_HOST_COMPLETE, "successful Host Tx's (MSDU)"),
3487 IPW2100_ORD(STAT_TX_DIR_DATA, "successful Directed Tx's (MSDU)"),
3488 IPW2100_ORD(STAT_TX_DIR_DATA1, "successful Directed Tx's (MSDU) @ 1MB"),
3489 IPW2100_ORD(STAT_TX_DIR_DATA2, "successful Directed Tx's (MSDU) @ 2MB"),
3490 IPW2100_ORD(STAT_TX_DIR_DATA5_5, "successful Directed Tx's (MSDU) @ 5_5MB"),
3491 IPW2100_ORD(STAT_TX_DIR_DATA11, "successful Directed Tx's (MSDU) @ 11MB"),
3492 IPW2100_ORD(STAT_TX_NODIR_DATA1, "successful Non_Directed Tx's (MSDU) @ 1MB"),
3493 IPW2100_ORD(STAT_TX_NODIR_DATA2, "successful Non_Directed Tx's (MSDU) @ 2MB"),
3494 IPW2100_ORD(STAT_TX_NODIR_DATA5_5, "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3495 IPW2100_ORD(STAT_TX_NODIR_DATA11, "successful Non_Directed Tx's (MSDU) @ 11MB"),
3496 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3497 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3498 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3499 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3500 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3501 IPW2100_ORD(STAT_TX_ASSN_RESP, "successful Association response Tx's"),
3502 IPW2100_ORD(STAT_TX_REASSN, "successful Reassociation Tx's"),
3503 IPW2100_ORD(STAT_TX_REASSN_RESP, "successful Reassociation response Tx's"),
3504 IPW2100_ORD(STAT_TX_PROBE, "probes successfully transmitted"),
3505 IPW2100_ORD(STAT_TX_PROBE_RESP, "probe responses successfully transmitted"),
3506 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3507 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3508 IPW2100_ORD(STAT_TX_DISASSN, "successful Disassociation TX"),
3509 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3510 IPW2100_ORD(STAT_TX_DEAUTH, "successful Deauthentication TX"),
3511 IPW2100_ORD(STAT_TX_TOTAL_BYTES, "Total successful Tx data bytes"),
3512 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3513 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3514 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3515 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3516 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3517 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3518 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,"times max tries in a hop failed"),
3519 IPW2100_ORD(STAT_TX_DISASSN_FAIL, "times disassociation failed"),
3520 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3521 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3522 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3523 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3524 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3525 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3526 IPW2100_ORD(STAT_RX_DIR_DATA5_5, "directed packets at 5.5MB"),
3527 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3528 IPW2100_ORD(STAT_RX_NODIR_DATA,"nondirected packets"),
3529 IPW2100_ORD(STAT_RX_NODIR_DATA1, "nondirected packets at 1MB"),
3530 IPW2100_ORD(STAT_RX_NODIR_DATA2, "nondirected packets at 2MB"),
3531 IPW2100_ORD(STAT_RX_NODIR_DATA5_5, "nondirected packets at 5.5MB"),
3532 IPW2100_ORD(STAT_RX_NODIR_DATA11, "nondirected packets at 11MB"),
3533 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3534 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"),
3535 IPW2100_ORD(STAT_RX_CTS, "Rx CTS"),
3536 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3537 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3538 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3539 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3540 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3541 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3542 IPW2100_ORD(STAT_RX_REASSN_RESP, "Reassociation response Rx's"),
3543 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3544 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3545 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3546 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3547 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3548 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3549 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3550 IPW2100_ORD(STAT_RX_TOTAL_BYTES,"Total rx data bytes received"),
3551 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3552 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3553 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3554 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3555 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3556 IPW2100_ORD(STAT_RX_DUPLICATE1, "duplicate rx packets at 1MB"),
3557 IPW2100_ORD(STAT_RX_DUPLICATE2, "duplicate rx packets at 2MB"),
3558 IPW2100_ORD(STAT_RX_DUPLICATE5_5, "duplicate rx packets at 5.5MB"),
3559 IPW2100_ORD(STAT_RX_DUPLICATE11, "duplicate rx packets at 11MB"),
3560 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3561 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3562 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3563 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3564 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL, "rx frames with invalid protocol"),
3565 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3566 IPW2100_ORD(STAT_RX_NO_BUFFER, "rx frames rejected due to no buffer"),
3567 IPW2100_ORD(STAT_RX_MISSING_FRAG, "rx frames dropped due to missing fragment"),
3568 IPW2100_ORD(STAT_RX_ORPHAN_FRAG, "rx frames dropped due to non-sequential fragment"),
3569 IPW2100_ORD(STAT_RX_ORPHAN_FRAME, "rx frames dropped due to unmatched 1st frame"),
3570 IPW2100_ORD(STAT_RX_FRAG_AGEOUT, "rx frames dropped due to uncompleted frame"),
3571 IPW2100_ORD(STAT_RX_ICV_ERRORS, "ICV errors during decryption"),
3572 IPW2100_ORD(STAT_PSP_SUSPENSION,"times adapter suspended"),
3573 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3574 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT, "poll response timeouts"),
3575 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT, "timeouts waiting for last {broad,multi}cast pkt"),
3576 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3577 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3578 IPW2100_ORD(STAT_PSP_STATION_ID,"PSP Station ID"),
3579 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3580 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,"current calculation of % missed beacons"),
3581 IPW2100_ORD(STAT_PERCENT_RETRIES,"current calculation of % missed tx retries"),
3582 IPW2100_ORD(ASSOCIATED_AP_PTR, "0 if not associated, else pointer to AP table entry"),
3583 IPW2100_ORD(AVAILABLE_AP_CNT, "AP's decsribed in the AP table"),
3584 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3585 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3586 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3587 IPW2100_ORD(STAT_ASSN_RESP_FAIL,"failures due to response fail"),
3588 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3589 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3590 IPW2100_ORD(STAT_ROAM_INHIBIT, "times roaming was inhibited due to activity"),
3591 IPW2100_ORD(RSSI_AT_ASSN, "RSSI of associated AP at time of association"),
3592 IPW2100_ORD(STAT_ASSN_CAUSE1, "reassociation: no probe response or TX on hop"),
3593 IPW2100_ORD(STAT_ASSN_CAUSE2, "reassociation: poor tx/rx quality"),
3594 IPW2100_ORD(STAT_ASSN_CAUSE3, "reassociation: tx/rx quality (excessive AP load"),
3595 IPW2100_ORD(STAT_ASSN_CAUSE4, "reassociation: AP RSSI level"),
3596 IPW2100_ORD(STAT_ASSN_CAUSE5, "reassociations due to load leveling"),
3597 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3598 IPW2100_ORD(STAT_AUTH_RESP_FAIL,"times authentication response failed"),
3599 IPW2100_ORD(STATION_TABLE_CNT, "entries in association table"),
3600 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3601 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3602 IPW2100_ORD(COUNTRY_CODE, "IEEE country code as recv'd from beacon"),
3603 IPW2100_ORD(COUNTRY_CHANNELS, "channels suported by country"),
3604 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3605 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3606 IPW2100_ORD(ANTENNA_DIVERSITY, "TRUE if antenna diversity is disabled"),
3607 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3608 IPW2100_ORD(OUR_FREQ, "current radio freq lower digits - channel ID"),
3609 IPW2100_ORD(RTC_TIME, "current RTC time"),
3610 IPW2100_ORD(PORT_TYPE, "operating mode"),
3611 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3612 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3613 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3614 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3615 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3616 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3617 IPW2100_ORD(CAPABILITIES, "Management frame capability field"),
3618 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3619 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3620 IPW2100_ORD(RTS_THRESHOLD, "Min packet length for RTS handshaking"),
3621 IPW2100_ORD(INT_MODE, "International mode"),
3622 IPW2100_ORD(FRAGMENTATION_THRESHOLD, "protocol frag threshold"),
3623 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS, "EEPROM offset in SRAM"),
3624 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE, "EEPROM size in SRAM"),
3625 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3626 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS, "EEPROM IBSS 11b channel set"),
3627 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3628 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3629 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3630 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3631 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),
3635 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3639 struct ipw2100_priv *priv = dev_get_drvdata(d);
3640 struct net_device *dev = priv->net_dev;
3644 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3646 for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
3647 read_register(dev, hw_data[i].addr, &val);
3648 out += sprintf(out, "%30s [%08X] : %08X\n",
3649 hw_data[i].name, hw_data[i].addr, val);
3654 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3657 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3660 struct ipw2100_priv *priv = dev_get_drvdata(d);
3661 struct net_device *dev = priv->net_dev;
3665 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3667 for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
3672 switch (nic_data[i].size) {
3674 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3675 out += sprintf(out, "%30s [%08X] : %02X\n",
3676 nic_data[i].name, nic_data[i].addr,
3680 read_nic_word(dev, nic_data[i].addr, &tmp16);
3681 out += sprintf(out, "%30s [%08X] : %04X\n",
3682 nic_data[i].name, nic_data[i].addr,
3686 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3687 out += sprintf(out, "%30s [%08X] : %08X\n",
3688 nic_data[i].name, nic_data[i].addr,
3695 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3698 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3701 struct ipw2100_priv *priv = dev_get_drvdata(d);
3702 struct net_device *dev = priv->net_dev;
3703 static unsigned long loop = 0;
3709 if (loop >= 0x30000)
3712 /* sysfs provides us PAGE_SIZE buffer */
3713 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3715 if (priv->snapshot[0]) for (i = 0; i < 4; i++)
3716 buffer[i] = *(u32 *)SNAPSHOT_ADDR(loop + i * 4);
3717 else for (i = 0; i < 4; i++)
3718 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3721 len += sprintf(buf + len,
3741 ((u8*)buffer)[0xf]);
3743 len += sprintf(buf + len, "%s\n",
3744 snprint_line(line, sizeof(line),
3745 (u8*)buffer, 16, loop));
3752 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3753 const char *buf, size_t count)
3755 struct ipw2100_priv *priv = dev_get_drvdata(d);
3756 struct net_device *dev = priv->net_dev;
3757 const char *p = buf;
3763 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3764 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3768 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3769 tolower(p[1]) == 'f')) {
3770 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3774 } else if (tolower(p[0]) == 'r') {
3775 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n",
3777 ipw2100_snapshot_free(priv);
3780 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3781 "reset = clear memory snapshot\n",
3786 static DEVICE_ATTR(memory, S_IWUSR|S_IRUGO, show_memory, store_memory);
3789 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3792 struct ipw2100_priv *priv = dev_get_drvdata(d);
3796 static int loop = 0;
3798 if (loop >= sizeof(ord_data) / sizeof(*ord_data))
3801 /* sysfs provides us PAGE_SIZE buffer */
3802 while (len < PAGE_SIZE - 128 &&
3803 loop < (sizeof(ord_data) / sizeof(*ord_data))) {
3805 val_len = sizeof(u32);
3807 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
3809 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
3810 ord_data[loop].index,
3811 ord_data[loop].desc);
3813 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
3814 ord_data[loop].index, val,
3815 ord_data[loop].desc);
3821 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
3824 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
3827 struct ipw2100_priv *priv = dev_get_drvdata(d);
3830 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
3831 priv->interrupts, priv->tx_interrupts,
3832 priv->rx_interrupts, priv->inta_other);
3833 out += sprintf(out, "firmware resets: %d\n", priv->resets);
3834 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
3835 #ifdef CONFIG_IPW_DEBUG
3836 out += sprintf(out, "packet mismatch image: %s\n",
3837 priv->snapshot[0] ? "YES" : "NO");
3842 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
3845 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
3849 if (mode == priv->ieee->iw_mode)
3852 err = ipw2100_disable_adapter(priv);
3854 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
3855 priv->net_dev->name, err);
3861 priv->net_dev->type = ARPHRD_ETHER;
3864 priv->net_dev->type = ARPHRD_ETHER;
3866 #ifdef CONFIG_IPW2100_MONITOR
3867 case IW_MODE_MONITOR:
3868 priv->last_mode = priv->ieee->iw_mode;
3869 priv->net_dev->type = ARPHRD_IEEE80211;
3871 #endif /* CONFIG_IPW2100_MONITOR */
3874 priv->ieee->iw_mode = mode;
3877 /* Indicate ipw2100_download_firmware download firmware
3878 * from disk instead of memory. */
3879 ipw2100_firmware.version = 0;
3882 printk(KERN_INFO "%s: Reseting on mode change.\n",
3883 priv->net_dev->name);
3884 priv->reset_backoff = 0;
3885 schedule_reset(priv);
3890 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
3893 struct ipw2100_priv *priv = dev_get_drvdata(d);
3896 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" # y "\n", priv-> x)
3898 if (priv->status & STATUS_ASSOCIATED)
3899 len += sprintf(buf + len, "connected: %lu\n",
3900 get_seconds() - priv->connect_start);
3902 len += sprintf(buf + len, "not connected\n");
3904 DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], p);
3905 DUMP_VAR(status, 08lx);
3906 DUMP_VAR(config, 08lx);
3907 DUMP_VAR(capability, 08lx);
3909 len += sprintf(buf + len, "last_rtc: %lu\n", (unsigned long)priv->last_rtc);
3911 DUMP_VAR(fatal_error, d);
3912 DUMP_VAR(stop_hang_check, d);
3913 DUMP_VAR(stop_rf_kill, d);
3914 DUMP_VAR(messages_sent, d);
3916 DUMP_VAR(tx_pend_stat.value, d);
3917 DUMP_VAR(tx_pend_stat.hi, d);
3919 DUMP_VAR(tx_free_stat.value, d);
3920 DUMP_VAR(tx_free_stat.lo, d);
3922 DUMP_VAR(msg_free_stat.value, d);
3923 DUMP_VAR(msg_free_stat.lo, d);
3925 DUMP_VAR(msg_pend_stat.value, d);
3926 DUMP_VAR(msg_pend_stat.hi, d);
3928 DUMP_VAR(fw_pend_stat.value, d);
3929 DUMP_VAR(fw_pend_stat.hi, d);
3931 DUMP_VAR(txq_stat.value, d);
3932 DUMP_VAR(txq_stat.lo, d);
3934 DUMP_VAR(ieee->scans, d);
3935 DUMP_VAR(reset_backoff, d);
3939 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
3942 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
3945 struct ipw2100_priv *priv = dev_get_drvdata(d);
3946 char essid[IW_ESSID_MAX_SIZE + 1];
3953 memset(essid, 0, sizeof(essid));
3954 memset(bssid, 0, sizeof(bssid));
3956 length = IW_ESSID_MAX_SIZE;
3957 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
3959 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3962 length = sizeof(bssid);
3963 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
3966 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3969 length = sizeof(u32);
3970 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
3972 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3975 out += sprintf(out, "ESSID: %s\n", essid);
3976 out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n",
3977 bssid[0], bssid[1], bssid[2],
3978 bssid[3], bssid[4], bssid[5]);
3979 out += sprintf(out, "Channel: %d\n", chan);
3983 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
3986 #ifdef CONFIG_IPW_DEBUG
3987 static ssize_t show_debug_level(struct device_driver *d, char *buf)
3989 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
3992 static ssize_t store_debug_level(struct device_driver *d, const char *buf,
3995 char *p = (char *)buf;
3998 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4000 if (p[0] == 'x' || p[0] == 'X')
4002 val = simple_strtoul(p, &p, 16);
4004 val = simple_strtoul(p, &p, 10);
4006 IPW_DEBUG_INFO(DRV_NAME
4007 ": %s is not in hex or decimal form.\n", buf);
4009 ipw2100_debug_level = val;
4011 return strnlen(buf, count);
4013 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4015 #endif /* CONFIG_IPW_DEBUG */
4018 static ssize_t show_fatal_error(struct device *d,
4019 struct device_attribute *attr, char *buf)
4021 struct ipw2100_priv *priv = dev_get_drvdata(d);
4025 if (priv->fatal_error)
4026 out += sprintf(out, "0x%08X\n",
4029 out += sprintf(out, "0\n");
4031 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4032 if (!priv->fatal_errors[(priv->fatal_index - i) %
4033 IPW2100_ERROR_QUEUE])
4036 out += sprintf(out, "%d. 0x%08X\n", i,
4037 priv->fatal_errors[(priv->fatal_index - i) %
4038 IPW2100_ERROR_QUEUE]);
4044 static ssize_t store_fatal_error(struct device *d,
4045 struct device_attribute *attr, const char *buf, size_t count)
4047 struct ipw2100_priv *priv = dev_get_drvdata(d);
4048 schedule_reset(priv);
4051 static DEVICE_ATTR(fatal_error, S_IWUSR|S_IRUGO, show_fatal_error, store_fatal_error);
4054 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4057 struct ipw2100_priv *priv = dev_get_drvdata(d);
4058 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4061 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4062 const char *buf, size_t count)
4064 struct ipw2100_priv *priv = dev_get_drvdata(d);
4065 struct net_device *dev = priv->net_dev;
4066 char buffer[] = "00000000";
4068 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4072 IPW_DEBUG_INFO("enter\n");
4074 strncpy(buffer, buf, len);
4077 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4079 if (p[0] == 'x' || p[0] == 'X')
4081 val = simple_strtoul(p, &p, 16);
4083 val = simple_strtoul(p, &p, 10);
4085 IPW_DEBUG_INFO("%s: user supplied invalid value.\n",
4088 priv->ieee->scan_age = val;
4089 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4092 IPW_DEBUG_INFO("exit\n");
4095 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4098 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4101 /* 0 - RF kill not enabled
4102 1 - SW based RF kill active (sysfs)
4103 2 - HW based RF kill active
4104 3 - Both HW and SW baed RF kill active */
4105 struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
4106 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4107 (rf_kill_active(priv) ? 0x2 : 0x0);
4108 return sprintf(buf, "%i\n", val);
4111 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4113 if ((disable_radio ? 1 : 0) ==
4114 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4117 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4118 disable_radio ? "OFF" : "ON");
4120 down(&priv->action_sem);
4122 if (disable_radio) {
4123 priv->status |= STATUS_RF_KILL_SW;
4126 priv->status &= ~STATUS_RF_KILL_SW;
4127 if (rf_kill_active(priv)) {
4128 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4129 "disabled by HW switch\n");
4130 /* Make sure the RF_KILL check timer is running */
4131 priv->stop_rf_kill = 0;
4132 cancel_delayed_work(&priv->rf_kill);
4133 queue_delayed_work(priv->workqueue, &priv->rf_kill,
4136 schedule_reset(priv);
4139 up(&priv->action_sem);
4143 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4144 const char *buf, size_t count)
4146 struct ipw2100_priv *priv = dev_get_drvdata(d);
4147 ipw_radio_kill_sw(priv, buf[0] == '1');
4150 static DEVICE_ATTR(rf_kill, S_IWUSR|S_IRUGO, show_rf_kill, store_rf_kill);
4153 static struct attribute *ipw2100_sysfs_entries[] = {
4154 &dev_attr_hardware.attr,
4155 &dev_attr_registers.attr,
4156 &dev_attr_ordinals.attr,
4158 &dev_attr_stats.attr,
4159 &dev_attr_internals.attr,
4160 &dev_attr_bssinfo.attr,
4161 &dev_attr_memory.attr,
4162 &dev_attr_scan_age.attr,
4163 &dev_attr_fatal_error.attr,
4164 &dev_attr_rf_kill.attr,
4166 &dev_attr_status.attr,
4167 &dev_attr_capability.attr,
4171 static struct attribute_group ipw2100_attribute_group = {
4172 .attrs = ipw2100_sysfs_entries,
4176 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4178 struct ipw2100_status_queue *q = &priv->status_queue;
4180 IPW_DEBUG_INFO("enter\n");
4182 q->size = entries * sizeof(struct ipw2100_status);
4183 q->drv = (struct ipw2100_status *)pci_alloc_consistent(
4184 priv->pci_dev, q->size, &q->nic);
4187 "Can not allocate status queue.\n");
4191 memset(q->drv, 0, q->size);
4193 IPW_DEBUG_INFO("exit\n");
4198 static void status_queue_free(struct ipw2100_priv *priv)
4200 IPW_DEBUG_INFO("enter\n");
4202 if (priv->status_queue.drv) {
4203 pci_free_consistent(
4204 priv->pci_dev, priv->status_queue.size,
4205 priv->status_queue.drv, priv->status_queue.nic);
4206 priv->status_queue.drv = NULL;
4209 IPW_DEBUG_INFO("exit\n");
4212 static int bd_queue_allocate(struct ipw2100_priv *priv,
4213 struct ipw2100_bd_queue *q, int entries)
4215 IPW_DEBUG_INFO("enter\n");
4217 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4219 q->entries = entries;
4220 q->size = entries * sizeof(struct ipw2100_bd);
4221 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4223 IPW_DEBUG_INFO("can't allocate shared memory for buffer descriptors\n");
4226 memset(q->drv, 0, q->size);
4228 IPW_DEBUG_INFO("exit\n");
4233 static void bd_queue_free(struct ipw2100_priv *priv,
4234 struct ipw2100_bd_queue *q)
4236 IPW_DEBUG_INFO("enter\n");
4242 pci_free_consistent(priv->pci_dev,
4243 q->size, q->drv, q->nic);
4247 IPW_DEBUG_INFO("exit\n");
4250 static void bd_queue_initialize(
4251 struct ipw2100_priv *priv, struct ipw2100_bd_queue * q,
4252 u32 base, u32 size, u32 r, u32 w)
4254 IPW_DEBUG_INFO("enter\n");
4256 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv, (u32)q->nic);
4258 write_register(priv->net_dev, base, q->nic);
4259 write_register(priv->net_dev, size, q->entries);
4260 write_register(priv->net_dev, r, q->oldest);
4261 write_register(priv->net_dev, w, q->next);
4263 IPW_DEBUG_INFO("exit\n");
4266 static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
4268 if (priv->workqueue) {
4269 priv->stop_rf_kill = 1;
4270 priv->stop_hang_check = 1;
4271 cancel_delayed_work(&priv->reset_work);
4272 cancel_delayed_work(&priv->security_work);
4273 cancel_delayed_work(&priv->wx_event_work);
4274 cancel_delayed_work(&priv->hang_check);
4275 cancel_delayed_work(&priv->rf_kill);
4276 destroy_workqueue(priv->workqueue);
4277 priv->workqueue = NULL;
4281 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4283 int i, j, err = -EINVAL;
4287 IPW_DEBUG_INFO("enter\n");
4289 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4291 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4292 priv->net_dev->name);
4296 priv->tx_buffers = (struct ipw2100_tx_packet *)kmalloc(
4297 TX_PENDED_QUEUE_LENGTH * sizeof(struct ipw2100_tx_packet),
4299 if (!priv->tx_buffers) {
4300 printk(KERN_ERR DRV_NAME ": %s: alloc failed form tx buffers.\n",
4301 priv->net_dev->name);
4302 bd_queue_free(priv, &priv->tx_queue);
4306 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4307 v = pci_alloc_consistent(
4308 priv->pci_dev, sizeof(struct ipw2100_data_header), &p);
4310 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for tx "
4311 "buffers.\n", priv->net_dev->name);
4316 priv->tx_buffers[i].type = DATA;
4317 priv->tx_buffers[i].info.d_struct.data = (struct ipw2100_data_header*)v;
4318 priv->tx_buffers[i].info.d_struct.data_phys = p;
4319 priv->tx_buffers[i].info.d_struct.txb = NULL;
4322 if (i == TX_PENDED_QUEUE_LENGTH)
4325 for (j = 0; j < i; j++) {
4326 pci_free_consistent(
4328 sizeof(struct ipw2100_data_header),
4329 priv->tx_buffers[j].info.d_struct.data,
4330 priv->tx_buffers[j].info.d_struct.data_phys);
4333 kfree(priv->tx_buffers);
4334 priv->tx_buffers = NULL;
4339 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4343 IPW_DEBUG_INFO("enter\n");
4346 * reinitialize packet info lists
4348 INIT_LIST_HEAD(&priv->fw_pend_list);
4349 INIT_STAT(&priv->fw_pend_stat);
4352 * reinitialize lists
4354 INIT_LIST_HEAD(&priv->tx_pend_list);
4355 INIT_LIST_HEAD(&priv->tx_free_list);
4356 INIT_STAT(&priv->tx_pend_stat);
4357 INIT_STAT(&priv->tx_free_stat);
4359 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4360 /* We simply drop any SKBs that have been queued for
4362 if (priv->tx_buffers[i].info.d_struct.txb) {
4363 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
4364 priv->tx_buffers[i].info.d_struct.txb = NULL;
4367 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4370 SET_STAT(&priv->tx_free_stat, i);
4372 priv->tx_queue.oldest = 0;
4373 priv->tx_queue.available = priv->tx_queue.entries;
4374 priv->tx_queue.next = 0;
4375 INIT_STAT(&priv->txq_stat);
4376 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4378 bd_queue_initialize(priv, &priv->tx_queue,
4379 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4380 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4381 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4382 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4384 IPW_DEBUG_INFO("exit\n");
4388 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4392 IPW_DEBUG_INFO("enter\n");
4394 bd_queue_free(priv, &priv->tx_queue);
4396 if (!priv->tx_buffers)
4399 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4400 if (priv->tx_buffers[i].info.d_struct.txb) {
4401 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.txb);
4402 priv->tx_buffers[i].info.d_struct.txb = NULL;
4404 if (priv->tx_buffers[i].info.d_struct.data)
4405 pci_free_consistent(
4407 sizeof(struct ipw2100_data_header),
4408 priv->tx_buffers[i].info.d_struct.data,
4409 priv->tx_buffers[i].info.d_struct.data_phys);
4412 kfree(priv->tx_buffers);
4413 priv->tx_buffers = NULL;
4415 IPW_DEBUG_INFO("exit\n");
4420 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4422 int i, j, err = -EINVAL;
4424 IPW_DEBUG_INFO("enter\n");
4426 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4428 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4432 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4434 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4435 bd_queue_free(priv, &priv->rx_queue);
4442 priv->rx_buffers = (struct ipw2100_rx_packet *)
4443 kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
4445 if (!priv->rx_buffers) {
4446 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4448 bd_queue_free(priv, &priv->rx_queue);
4450 status_queue_free(priv);
4455 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4456 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4458 err = ipw2100_alloc_skb(priv, packet);
4459 if (unlikely(err)) {
4464 /* The BD holds the cache aligned address */
4465 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4466 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4467 priv->status_queue.drv[i].status_fields = 0;
4470 if (i == RX_QUEUE_LENGTH)
4473 for (j = 0; j < i; j++) {
4474 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4475 sizeof(struct ipw2100_rx_packet),
4476 PCI_DMA_FROMDEVICE);
4477 dev_kfree_skb(priv->rx_buffers[j].skb);
4480 kfree(priv->rx_buffers);
4481 priv->rx_buffers = NULL;
4483 bd_queue_free(priv, &priv->rx_queue);
4485 status_queue_free(priv);
4490 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4492 IPW_DEBUG_INFO("enter\n");
4494 priv->rx_queue.oldest = 0;
4495 priv->rx_queue.available = priv->rx_queue.entries - 1;
4496 priv->rx_queue.next = priv->rx_queue.entries - 1;
4498 INIT_STAT(&priv->rxq_stat);
4499 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4501 bd_queue_initialize(priv, &priv->rx_queue,
4502 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4503 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4504 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4505 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4507 /* set up the status queue */
4508 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4509 priv->status_queue.nic);
4511 IPW_DEBUG_INFO("exit\n");
4514 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4518 IPW_DEBUG_INFO("enter\n");
4520 bd_queue_free(priv, &priv->rx_queue);
4521 status_queue_free(priv);
4523 if (!priv->rx_buffers)
4526 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4527 if (priv->rx_buffers[i].rxp) {
4528 pci_unmap_single(priv->pci_dev,
4529 priv->rx_buffers[i].dma_addr,
4530 sizeof(struct ipw2100_rx),
4531 PCI_DMA_FROMDEVICE);
4532 dev_kfree_skb(priv->rx_buffers[i].skb);
4536 kfree(priv->rx_buffers);
4537 priv->rx_buffers = NULL;
4539 IPW_DEBUG_INFO("exit\n");
4542 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4544 u32 length = ETH_ALEN;
4549 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC,
4552 IPW_DEBUG_INFO("MAC address read failed\n");
4555 IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
4556 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
4558 memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
4563 /********************************************************************
4567 ********************************************************************/
4569 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4571 struct host_command cmd = {
4572 .host_command = ADAPTER_ADDRESS,
4573 .host_command_sequence = 0,
4574 .host_command_length = ETH_ALEN
4578 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4580 IPW_DEBUG_INFO("enter\n");
4582 if (priv->config & CFG_CUSTOM_MAC) {
4583 memcpy(cmd.host_command_parameters, priv->mac_addr,
4585 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4587 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4590 err = ipw2100_hw_send_command(priv, &cmd);
4592 IPW_DEBUG_INFO("exit\n");
4596 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4599 struct host_command cmd = {
4600 .host_command = PORT_TYPE,
4601 .host_command_sequence = 0,
4602 .host_command_length = sizeof(u32)
4606 switch (port_type) {
4608 cmd.host_command_parameters[0] = IPW_BSS;
4611 cmd.host_command_parameters[0] = IPW_IBSS;
4615 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4616 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4619 err = ipw2100_disable_adapter(priv);
4621 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
4622 priv->net_dev->name, err);
4627 /* send cmd to firmware */
4628 err = ipw2100_hw_send_command(priv, &cmd);
4631 ipw2100_enable_adapter(priv);
4637 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4640 struct host_command cmd = {
4641 .host_command = CHANNEL,
4642 .host_command_sequence = 0,
4643 .host_command_length = sizeof(u32)
4647 cmd.host_command_parameters[0] = channel;
4649 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4651 /* If BSS then we don't support channel selection */
4652 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4655 if ((channel != 0) &&
4656 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4660 err = ipw2100_disable_adapter(priv);
4665 err = ipw2100_hw_send_command(priv, &cmd);
4667 IPW_DEBUG_INFO("Failed to set channel to %d",
4673 priv->config |= CFG_STATIC_CHANNEL;
4675 priv->config &= ~CFG_STATIC_CHANNEL;
4677 priv->channel = channel;
4680 err = ipw2100_enable_adapter(priv);
4688 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4690 struct host_command cmd = {
4691 .host_command = SYSTEM_CONFIG,
4692 .host_command_sequence = 0,
4693 .host_command_length = 12,
4695 u32 ibss_mask, len = sizeof(u32);
4698 /* Set system configuration */
4701 err = ipw2100_disable_adapter(priv);
4706 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4707 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4709 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4711 IPW_CFG_802_1x_ENABLE;
4713 if (!(priv->config & CFG_LONG_PREAMBLE))
4714 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4716 err = ipw2100_get_ordinal(priv,
4717 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4720 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4722 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4723 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4726 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A;*/
4728 err = ipw2100_hw_send_command(priv, &cmd);
4732 /* If IPv6 is configured in the kernel then we don't want to filter out all
4733 * of the multicast packets as IPv6 needs some. */
4734 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4735 cmd.host_command = ADD_MULTICAST;
4736 cmd.host_command_sequence = 0;
4737 cmd.host_command_length = 0;
4739 ipw2100_hw_send_command(priv, &cmd);
4742 err = ipw2100_enable_adapter(priv);
4750 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4753 struct host_command cmd = {
4754 .host_command = BASIC_TX_RATES,
4755 .host_command_sequence = 0,
4756 .host_command_length = 4
4760 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4763 err = ipw2100_disable_adapter(priv);
4768 /* Set BASIC TX Rate first */
4769 ipw2100_hw_send_command(priv, &cmd);
4772 cmd.host_command = TX_RATES;
4773 ipw2100_hw_send_command(priv, &cmd);
4775 /* Set MSDU TX Rate */
4776 cmd.host_command = MSDU_TX_RATES;
4777 ipw2100_hw_send_command(priv, &cmd);
4780 err = ipw2100_enable_adapter(priv);
4785 priv->tx_rates = rate;
4790 static int ipw2100_set_power_mode(struct ipw2100_priv *priv,
4793 struct host_command cmd = {
4794 .host_command = POWER_MODE,
4795 .host_command_sequence = 0,
4796 .host_command_length = 4
4800 cmd.host_command_parameters[0] = power_level;
4802 err = ipw2100_hw_send_command(priv, &cmd);
4806 if (power_level == IPW_POWER_MODE_CAM)
4807 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
4809 priv->power_mode = IPW_POWER_ENABLED | power_level;
4811 #ifdef CONFIG_IPW2100_TX_POWER
4812 if (priv->port_type == IBSS &&
4813 priv->adhoc_power != DFTL_IBSS_TX_POWER) {
4814 /* Set beacon interval */
4815 cmd.host_command = TX_POWER_INDEX;
4816 cmd.host_command_parameters[0] = (u32)priv->adhoc_power;
4818 err = ipw2100_hw_send_command(priv, &cmd);
4828 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
4830 struct host_command cmd = {
4831 .host_command = RTS_THRESHOLD,
4832 .host_command_sequence = 0,
4833 .host_command_length = 4
4837 if (threshold & RTS_DISABLED)
4838 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
4840 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
4842 err = ipw2100_hw_send_command(priv, &cmd);
4846 priv->rts_threshold = threshold;
4852 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
4853 u32 threshold, int batch_mode)
4855 struct host_command cmd = {
4856 .host_command = FRAG_THRESHOLD,
4857 .host_command_sequence = 0,
4858 .host_command_length = 4,
4859 .host_command_parameters[0] = 0,
4864 err = ipw2100_disable_adapter(priv);
4870 threshold = DEFAULT_FRAG_THRESHOLD;
4872 threshold = max(threshold, MIN_FRAG_THRESHOLD);
4873 threshold = min(threshold, MAX_FRAG_THRESHOLD);
4876 cmd.host_command_parameters[0] = threshold;
4878 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
4880 err = ipw2100_hw_send_command(priv, &cmd);
4883 ipw2100_enable_adapter(priv);
4886 priv->frag_threshold = threshold;
4892 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
4894 struct host_command cmd = {
4895 .host_command = SHORT_RETRY_LIMIT,
4896 .host_command_sequence = 0,
4897 .host_command_length = 4
4901 cmd.host_command_parameters[0] = retry;
4903 err = ipw2100_hw_send_command(priv, &cmd);
4907 priv->short_retry_limit = retry;
4912 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
4914 struct host_command cmd = {
4915 .host_command = LONG_RETRY_LIMIT,
4916 .host_command_sequence = 0,
4917 .host_command_length = 4
4921 cmd.host_command_parameters[0] = retry;
4923 err = ipw2100_hw_send_command(priv, &cmd);
4927 priv->long_retry_limit = retry;
4933 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 *bssid,
4936 struct host_command cmd = {
4937 .host_command = MANDATORY_BSSID,
4938 .host_command_sequence = 0,
4939 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
4943 #ifdef CONFIG_IPW_DEBUG
4946 "MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
4947 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
4950 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
4952 /* if BSSID is empty then we disable mandatory bssid mode */
4954 memcpy((u8 *)cmd.host_command_parameters, bssid, ETH_ALEN);
4957 err = ipw2100_disable_adapter(priv);
4962 err = ipw2100_hw_send_command(priv, &cmd);
4965 ipw2100_enable_adapter(priv);
4970 #ifdef CONFIG_IEEE80211_WPA
4971 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
4973 struct host_command cmd = {
4974 .host_command = DISASSOCIATION_BSSID,
4975 .host_command_sequence = 0,
4976 .host_command_length = ETH_ALEN
4981 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
4984 /* The Firmware currently ignores the BSSID and just disassociates from
4985 * the currently associated AP -- but in the off chance that a future
4986 * firmware does use the BSSID provided here, we go ahead and try and
4987 * set it to the currently associated AP's BSSID */
4988 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
4990 err = ipw2100_hw_send_command(priv, &cmd);
4997 * Pseudo code for setting up wpa_frame:
5000 void x(struct ieee80211_assoc_frame *wpa_assoc)
5002 struct ipw2100_wpa_assoc_frame frame;
5003 frame->fixed_ie_mask = IPW_WPA_CAPABILTIES |
5004 IPW_WPA_LISTENINTERVAL |
5006 frame->capab_info = wpa_assoc->capab_info;
5007 frame->lisen_interval = wpa_assoc->listent_interval;
5008 memcpy(frame->current_ap, wpa_assoc->current_ap, ETH_ALEN);
5010 /* UNKNOWN -- I'm not postivive about this part; don't have any WPA
5011 * setup here to test it with.
5013 * Walk the IEs in the wpa_assoc and figure out the total size of all
5014 * that data. Stick that into frame->var_ie_len. Then memcpy() all of
5015 * the IEs from wpa_frame into frame.
5017 frame->var_ie_len = calculate_ie_len(wpa_assoc);
5018 memcpy(frame->var_ie, wpa_assoc->variable, frame->var_ie_len);
5020 ipw2100_set_wpa_ie(priv, &frame, 0);
5027 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
5028 struct ipw2100_wpa_assoc_frame *, int)
5029 __attribute__ ((unused));
5031 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
5032 struct ipw2100_wpa_assoc_frame *wpa_frame,
5035 struct host_command cmd = {
5036 .host_command = SET_WPA_IE,
5037 .host_command_sequence = 0,
5038 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5042 IPW_DEBUG_HC("SET_WPA_IE\n");
5045 err = ipw2100_disable_adapter(priv);
5050 memcpy(cmd.host_command_parameters, wpa_frame,
5051 sizeof(struct ipw2100_wpa_assoc_frame));
5053 err = ipw2100_hw_send_command(priv, &cmd);
5056 if (ipw2100_enable_adapter(priv))
5063 struct security_info_params {
5064 u32 allowed_ciphers;
5067 u8 replay_counters_number;
5068 u8 unicast_using_group;
5069 } __attribute__ ((packed));
5071 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5074 int unicast_using_group,
5077 struct host_command cmd = {
5078 .host_command = SET_SECURITY_INFORMATION,
5079 .host_command_sequence = 0,
5080 .host_command_length = sizeof(struct security_info_params)
5082 struct security_info_params *security =
5083 (struct security_info_params *)&cmd.host_command_parameters;
5085 memset(security, 0, sizeof(*security));
5087 /* If shared key AP authentication is turned on, then we need to
5088 * configure the firmware to try and use it.
5090 * Actual data encryption/decryption is handled by the host. */
5091 security->auth_mode = auth_mode;
5092 security->unicast_using_group = unicast_using_group;
5094 switch (security_level) {
5097 security->allowed_ciphers = IPW_NONE_CIPHER;
5100 security->allowed_ciphers = IPW_WEP40_CIPHER |
5104 security->allowed_ciphers = IPW_WEP40_CIPHER |
5105 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5107 case SEC_LEVEL_2_CKIP:
5108 security->allowed_ciphers = IPW_WEP40_CIPHER |
5109 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5112 security->allowed_ciphers = IPW_WEP40_CIPHER |
5113 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5118 "SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5119 security->auth_mode, security->allowed_ciphers, security_level);
5121 security->replay_counters_number = 0;
5124 err = ipw2100_disable_adapter(priv);
5129 err = ipw2100_hw_send_command(priv, &cmd);
5132 ipw2100_enable_adapter(priv);
5137 static int ipw2100_set_tx_power(struct ipw2100_priv *priv,
5140 struct host_command cmd = {
5141 .host_command = TX_POWER_INDEX,
5142 .host_command_sequence = 0,
5143 .host_command_length = 4
5147 cmd.host_command_parameters[0] = tx_power;
5149 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5150 err = ipw2100_hw_send_command(priv, &cmd);
5152 priv->tx_power = tx_power;
5157 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5158 u32 interval, int batch_mode)
5160 struct host_command cmd = {
5161 .host_command = BEACON_INTERVAL,
5162 .host_command_sequence = 0,
5163 .host_command_length = 4
5167 cmd.host_command_parameters[0] = interval;
5169 IPW_DEBUG_INFO("enter\n");
5171 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5173 err = ipw2100_disable_adapter(priv);
5178 ipw2100_hw_send_command(priv, &cmd);
5181 err = ipw2100_enable_adapter(priv);
5187 IPW_DEBUG_INFO("exit\n");
5193 void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5195 ipw2100_tx_initialize(priv);
5196 ipw2100_rx_initialize(priv);
5197 ipw2100_msg_initialize(priv);
5200 void ipw2100_queues_free(struct ipw2100_priv *priv)
5202 ipw2100_tx_free(priv);
5203 ipw2100_rx_free(priv);
5204 ipw2100_msg_free(priv);
5207 int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5209 if (ipw2100_tx_allocate(priv) ||
5210 ipw2100_rx_allocate(priv) ||
5211 ipw2100_msg_allocate(priv))
5217 ipw2100_tx_free(priv);
5218 ipw2100_rx_free(priv);
5219 ipw2100_msg_free(priv);
5223 #define IPW_PRIVACY_CAPABLE 0x0008
5225 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5228 struct host_command cmd = {
5229 .host_command = WEP_FLAGS,
5230 .host_command_sequence = 0,
5231 .host_command_length = 4
5235 cmd.host_command_parameters[0] = flags;
5237 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5240 err = ipw2100_disable_adapter(priv);
5242 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
5243 priv->net_dev->name, err);
5248 /* send cmd to firmware */
5249 err = ipw2100_hw_send_command(priv, &cmd);
5252 ipw2100_enable_adapter(priv);
5257 struct ipw2100_wep_key {
5263 /* Macros to ease up priting WEP keys */
5264 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5265 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5266 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5267 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5273 * @priv: struct to work on
5274 * @idx: index of the key we want to set
5275 * @key: ptr to the key data to set
5276 * @len: length of the buffer at @key
5277 * @batch_mode: FIXME perform the operation in batch mode, not
5278 * disabling the device.
5280 * @returns 0 if OK, < 0 errno code on error.
5282 * Fill out a command structure with the new wep key, length an
5283 * index and send it down the wire.
5285 static int ipw2100_set_key(struct ipw2100_priv *priv,
5286 int idx, char *key, int len, int batch_mode)
5288 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5289 struct host_command cmd = {
5290 .host_command = WEP_KEY_INFO,
5291 .host_command_sequence = 0,
5292 .host_command_length = sizeof(struct ipw2100_wep_key),
5294 struct ipw2100_wep_key *wep_key = (void*)cmd.host_command_parameters;
5297 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5300 /* NOTE: We don't check cached values in case the firmware was reset
5301 * or some other problem is occuring. If the user is setting the key,
5302 * then we push the change */
5305 wep_key->len = keylen;
5308 memcpy(wep_key->key, key, len);
5309 memset(wep_key->key + len, 0, keylen - len);
5312 /* Will be optimized out on debug not being configured in */
5314 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5315 priv->net_dev->name, wep_key->idx);
5316 else if (keylen == 5)
5317 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5318 priv->net_dev->name, wep_key->idx, wep_key->len,
5319 WEP_STR_64(wep_key->key));
5321 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5323 priv->net_dev->name, wep_key->idx, wep_key->len,
5324 WEP_STR_128(wep_key->key));
5327 err = ipw2100_disable_adapter(priv);
5328 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5330 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
5331 priv->net_dev->name, err);
5336 /* send cmd to firmware */
5337 err = ipw2100_hw_send_command(priv, &cmd);
5340 int err2 = ipw2100_enable_adapter(priv);
5347 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5348 int idx, int batch_mode)
5350 struct host_command cmd = {
5351 .host_command = WEP_KEY_INDEX,
5352 .host_command_sequence = 0,
5353 .host_command_length = 4,
5354 .host_command_parameters = { idx },
5358 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5360 if (idx < 0 || idx > 3)
5364 err = ipw2100_disable_adapter(priv);
5366 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
5367 priv->net_dev->name, err);
5372 /* send cmd to firmware */
5373 err = ipw2100_hw_send_command(priv, &cmd);
5376 ipw2100_enable_adapter(priv);
5382 static int ipw2100_configure_security(struct ipw2100_priv *priv,
5385 int i, err, auth_mode, sec_level, use_group;
5387 if (!(priv->status & STATUS_RUNNING))
5391 err = ipw2100_disable_adapter(priv);
5396 if (!priv->sec.enabled) {
5397 err = ipw2100_set_security_information(
5398 priv, IPW_AUTH_OPEN, SEC_LEVEL_0, 0, 1);
5400 auth_mode = IPW_AUTH_OPEN;
5401 if ((priv->sec.flags & SEC_AUTH_MODE) &&
5402 (priv->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
5403 auth_mode = IPW_AUTH_SHARED;
5405 sec_level = SEC_LEVEL_0;
5406 if (priv->sec.flags & SEC_LEVEL)
5407 sec_level = priv->sec.level;
5410 if (priv->sec.flags & SEC_UNICAST_GROUP)
5411 use_group = priv->sec.unicast_uses_group;
5413 err = ipw2100_set_security_information(
5414 priv, auth_mode, sec_level, use_group, 1);
5420 if (priv->sec.enabled) {
5421 for (i = 0; i < 4; i++) {
5422 if (!(priv->sec.flags & (1 << i))) {
5423 memset(priv->sec.keys[i], 0, WEP_KEY_LEN);
5424 priv->sec.key_sizes[i] = 0;
5426 err = ipw2100_set_key(priv, i,
5428 priv->sec.key_sizes[i],
5435 ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
5438 /* Always enable privacy so the Host can filter WEP packets if
5439 * encrypted data is sent up */
5440 err = ipw2100_set_wep_flags(
5441 priv, priv->sec.enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5445 priv->status &= ~STATUS_SECURITY_UPDATED;
5449 ipw2100_enable_adapter(priv);
5454 static void ipw2100_security_work(struct ipw2100_priv *priv)
5456 /* If we happen to have reconnected before we get a chance to
5457 * process this, then update the security settings--which causes
5458 * a disassociation to occur */
5459 if (!(priv->status & STATUS_ASSOCIATED) &&
5460 priv->status & STATUS_SECURITY_UPDATED)
5461 ipw2100_configure_security(priv, 0);
5464 static void shim__set_security(struct net_device *dev,
5465 struct ieee80211_security *sec)
5467 struct ipw2100_priv *priv = ieee80211_priv(dev);
5468 int i, force_update = 0;
5470 down(&priv->action_sem);
5471 if (!(priv->status & STATUS_INITIALIZED))
5474 for (i = 0; i < 4; i++) {
5475 if (sec->flags & (1 << i)) {
5476 priv->sec.key_sizes[i] = sec->key_sizes[i];
5477 if (sec->key_sizes[i] == 0)
5478 priv->sec.flags &= ~(1 << i);
5480 memcpy(priv->sec.keys[i], sec->keys[i],
5482 priv->sec.flags |= (1 << i);
5483 priv->status |= STATUS_SECURITY_UPDATED;
5487 if ((sec->flags & SEC_ACTIVE_KEY) &&
5488 priv->sec.active_key != sec->active_key) {
5489 if (sec->active_key <= 3) {
5490 priv->sec.active_key = sec->active_key;
5491 priv->sec.flags |= SEC_ACTIVE_KEY;
5493 priv->sec.flags &= ~SEC_ACTIVE_KEY;
5495 priv->status |= STATUS_SECURITY_UPDATED;
5498 if ((sec->flags & SEC_AUTH_MODE) &&
5499 (priv->sec.auth_mode != sec->auth_mode)) {
5500 priv->sec.auth_mode = sec->auth_mode;
5501 priv->sec.flags |= SEC_AUTH_MODE;
5502 priv->status |= STATUS_SECURITY_UPDATED;
5505 if (sec->flags & SEC_ENABLED &&
5506 priv->sec.enabled != sec->enabled) {
5507 priv->sec.flags |= SEC_ENABLED;
5508 priv->sec.enabled = sec->enabled;
5509 priv->status |= STATUS_SECURITY_UPDATED;
5513 if (sec->flags & SEC_LEVEL &&
5514 priv->sec.level != sec->level) {
5515 priv->sec.level = sec->level;
5516 priv->sec.flags |= SEC_LEVEL;
5517 priv->status |= STATUS_SECURITY_UPDATED;
5520 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5521 priv->sec.flags & (1<<8) ? '1' : '0',
5522 priv->sec.flags & (1<<7) ? '1' : '0',
5523 priv->sec.flags & (1<<6) ? '1' : '0',
5524 priv->sec.flags & (1<<5) ? '1' : '0',
5525 priv->sec.flags & (1<<4) ? '1' : '0',
5526 priv->sec.flags & (1<<3) ? '1' : '0',
5527 priv->sec.flags & (1<<2) ? '1' : '0',
5528 priv->sec.flags & (1<<1) ? '1' : '0',
5529 priv->sec.flags & (1<<0) ? '1' : '0');
5531 /* As a temporary work around to enable WPA until we figure out why
5532 * wpa_supplicant toggles the security capability of the driver, which
5533 * forces a disassocation with force_update...
5535 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5536 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5537 ipw2100_configure_security(priv, 0);
5539 up(&priv->action_sem);
5542 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5548 IPW_DEBUG_INFO("enter\n");
5550 err = ipw2100_disable_adapter(priv);
5553 #ifdef CONFIG_IPW2100_MONITOR
5554 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5555 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5559 IPW_DEBUG_INFO("exit\n");
5563 #endif /* CONFIG_IPW2100_MONITOR */
5565 err = ipw2100_read_mac_address(priv);
5569 err = ipw2100_set_mac_address(priv, batch_mode);
5573 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5577 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5578 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5583 err = ipw2100_system_config(priv, batch_mode);
5587 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5591 /* Default to power mode OFF */
5592 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5596 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5600 if (priv->config & CFG_STATIC_BSSID)
5601 bssid = priv->bssid;
5604 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5608 if (priv->config & CFG_STATIC_ESSID)
5609 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5612 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5616 err = ipw2100_configure_security(priv, batch_mode);
5620 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5621 err = ipw2100_set_ibss_beacon_interval(
5622 priv, priv->beacon_interval, batch_mode);
5626 err = ipw2100_set_tx_power(priv, priv->tx_power);
5632 err = ipw2100_set_fragmentation_threshold(
5633 priv, priv->frag_threshold, batch_mode);
5638 IPW_DEBUG_INFO("exit\n");
5644 /*************************************************************************
5646 * EXTERNALLY CALLED METHODS
5648 *************************************************************************/
5650 /* This method is called by the network layer -- not to be confused with
5651 * ipw2100_set_mac_address() declared above called by this driver (and this
5652 * method as well) to talk to the firmware */
5653 static int ipw2100_set_address(struct net_device *dev, void *p)
5655 struct ipw2100_priv *priv = ieee80211_priv(dev);
5656 struct sockaddr *addr = p;
5659 if (!is_valid_ether_addr(addr->sa_data))
5660 return -EADDRNOTAVAIL;
5662 down(&priv->action_sem);
5664 priv->config |= CFG_CUSTOM_MAC;
5665 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5667 err = ipw2100_set_mac_address(priv, 0);
5671 priv->reset_backoff = 0;
5672 up(&priv->action_sem);
5673 ipw2100_reset_adapter(priv);
5677 up(&priv->action_sem);
5681 static int ipw2100_open(struct net_device *dev)
5683 struct ipw2100_priv *priv = ieee80211_priv(dev);
5684 unsigned long flags;
5685 IPW_DEBUG_INFO("dev->open\n");
5687 spin_lock_irqsave(&priv->low_lock, flags);
5688 if (priv->status & STATUS_ASSOCIATED) {
5689 netif_carrier_on(dev);
5690 netif_start_queue(dev);
5692 spin_unlock_irqrestore(&priv->low_lock, flags);
5697 static int ipw2100_close(struct net_device *dev)
5699 struct ipw2100_priv *priv = ieee80211_priv(dev);
5700 unsigned long flags;
5701 struct list_head *element;
5702 struct ipw2100_tx_packet *packet;
5704 IPW_DEBUG_INFO("enter\n");
5706 spin_lock_irqsave(&priv->low_lock, flags);
5708 if (priv->status & STATUS_ASSOCIATED)
5709 netif_carrier_off(dev);
5710 netif_stop_queue(dev);
5712 /* Flush the TX queue ... */
5713 while (!list_empty(&priv->tx_pend_list)) {
5714 element = priv->tx_pend_list.next;
5715 packet = list_entry(element, struct ipw2100_tx_packet, list);
5718 DEC_STAT(&priv->tx_pend_stat);
5720 ieee80211_txb_free(packet->info.d_struct.txb);
5721 packet->info.d_struct.txb = NULL;
5723 list_add_tail(element, &priv->tx_free_list);
5724 INC_STAT(&priv->tx_free_stat);
5726 spin_unlock_irqrestore(&priv->low_lock, flags);
5728 IPW_DEBUG_INFO("exit\n");
5736 * TODO: Fix this function... its just wrong
5738 static void ipw2100_tx_timeout(struct net_device *dev)
5740 struct ipw2100_priv *priv = ieee80211_priv(dev);
5742 priv->ieee->stats.tx_errors++;
5744 #ifdef CONFIG_IPW2100_MONITOR
5745 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5749 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5751 schedule_reset(priv);
5756 * TODO: reimplement it so that it reads statistics
5757 * from the adapter using ordinal tables
5758 * instead of/in addition to collecting them
5761 static struct net_device_stats *ipw2100_stats(struct net_device *dev)
5763 struct ipw2100_priv *priv = ieee80211_priv(dev);
5765 return &priv->ieee->stats;
5768 /* Support for wpa_supplicant. Will be replaced with WEXT once
5769 * they get WPA support. */
5770 #ifdef CONFIG_IEEE80211_WPA
5772 /* following definitions must match definitions in driver_ipw2100.c */
5774 #define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30
5776 #define IPW2100_CMD_SET_WPA_PARAM 1
5777 #define IPW2100_CMD_SET_WPA_IE 2
5778 #define IPW2100_CMD_SET_ENCRYPTION 3
5779 #define IPW2100_CMD_MLME 4
5781 #define IPW2100_PARAM_WPA_ENABLED 1
5782 #define IPW2100_PARAM_TKIP_COUNTERMEASURES 2
5783 #define IPW2100_PARAM_DROP_UNENCRYPTED 3
5784 #define IPW2100_PARAM_PRIVACY_INVOKED 4
5785 #define IPW2100_PARAM_AUTH_ALGS 5
5786 #define IPW2100_PARAM_IEEE_802_1X 6
5788 #define IPW2100_MLME_STA_DEAUTH 1
5789 #define IPW2100_MLME_STA_DISASSOC 2
5791 #define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2
5792 #define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3
5793 #define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4
5794 #define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5
5795 #define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6
5796 #define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7
5798 #define IPW2100_CRYPT_ALG_NAME_LEN 16
5800 struct ipw2100_param {
5802 u8 sta_addr[ETH_ALEN];
5817 u8 alg[IPW2100_CRYPT_ALG_NAME_LEN];
5821 u8 seq[8]; /* sequence counter (set: RX, get: TX) */
5829 /* end of driver_ipw2100.c code */
5831 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value){
5833 struct ieee80211_device *ieee = priv->ieee;
5834 struct ieee80211_security sec = {
5835 .flags = SEC_LEVEL | SEC_ENABLED,
5839 ieee->wpa_enabled = value;
5842 sec.level = SEC_LEVEL_3;
5845 sec.level = SEC_LEVEL_0;
5849 if (ieee->set_security)
5850 ieee->set_security(ieee->dev, &sec);
5857 #define AUTH_ALG_OPEN_SYSTEM 0x1
5858 #define AUTH_ALG_SHARED_KEY 0x2
5860 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value){
5862 struct ieee80211_device *ieee = priv->ieee;
5863 struct ieee80211_security sec = {
5864 .flags = SEC_AUTH_MODE,
5868 if (value & AUTH_ALG_SHARED_KEY){
5869 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5872 sec.auth_mode = WLAN_AUTH_OPEN;
5876 if (ieee->set_security)
5877 ieee->set_security(ieee->dev, &sec);
5885 static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value){
5887 struct ipw2100_priv *priv = ieee80211_priv(dev);
5891 case IPW2100_PARAM_WPA_ENABLED:
5892 ret = ipw2100_wpa_enable(priv, value);
5895 case IPW2100_PARAM_TKIP_COUNTERMEASURES:
5896 priv->ieee->tkip_countermeasures=value;
5899 case IPW2100_PARAM_DROP_UNENCRYPTED:
5900 priv->ieee->drop_unencrypted=value;
5903 case IPW2100_PARAM_PRIVACY_INVOKED:
5904 priv->ieee->privacy_invoked=value;
5907 case IPW2100_PARAM_AUTH_ALGS:
5908 ret = ipw2100_wpa_set_auth_algs(priv, value);
5911 case IPW2100_PARAM_IEEE_802_1X:
5912 priv->ieee->ieee802_1x=value;
5916 printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n",
5924 static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason){
5926 struct ipw2100_priv *priv = ieee80211_priv(dev);
5930 case IPW2100_MLME_STA_DEAUTH:
5934 case IPW2100_MLME_STA_DISASSOC:
5935 ipw2100_disassociate_bssid(priv);
5939 printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n",
5940 dev->name, command);
5948 void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5949 char *wpa_ie, int wpa_ie_len){
5951 struct ipw2100_wpa_assoc_frame frame;
5953 frame.fixed_ie_mask = 0;
5956 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5957 frame.var_ie_len = wpa_ie_len;
5959 /* make sure WPA is enabled */
5960 ipw2100_wpa_enable(priv, 1);
5961 ipw2100_set_wpa_ie(priv, &frame, 0);
5965 static int ipw2100_wpa_set_wpa_ie(struct net_device *dev,
5966 struct ipw2100_param *param, int plen){
5968 struct ipw2100_priv *priv = ieee80211_priv(dev);
5969 struct ieee80211_device *ieee = priv->ieee;
5972 if (! ieee->wpa_enabled)
5975 if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
5976 (param->u.wpa_ie.len &&
5977 param->u.wpa_ie.data==NULL))
5980 if (param->u.wpa_ie.len){
5981 buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
5985 memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
5987 kfree(ieee->wpa_ie);
5989 ieee->wpa_ie_len = param->u.wpa_ie.len;
5992 kfree(ieee->wpa_ie);
5993 ieee->wpa_ie = NULL;
5994 ieee->wpa_ie_len = 0;
5997 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
6002 /* implementation borrowed from hostap driver */
6004 static int ipw2100_wpa_set_encryption(struct net_device *dev,
6005 struct ipw2100_param *param, int param_len){
6008 struct ipw2100_priv *priv = ieee80211_priv(dev);
6009 struct ieee80211_device *ieee = priv->ieee;
6010 struct ieee80211_crypto_ops *ops;
6011 struct ieee80211_crypt_data **crypt;
6013 struct ieee80211_security sec = {
6017 param->u.crypt.err = 0;
6018 param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0';
6021 (int) ((char *) param->u.crypt.key - (char *) param) +
6022 param->u.crypt.key_len){
6023 IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len, param->u.crypt.key_len);
6026 if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
6027 param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
6028 param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
6029 if (param->u.crypt.idx >= WEP_KEYS)
6031 crypt = &ieee->crypt[param->u.crypt.idx];
6036 if (strcmp(param->u.crypt.alg, "none") == 0) {
6039 sec.level = SEC_LEVEL_0;
6040 sec.flags |= SEC_ENABLED | SEC_LEVEL;
6041 ieee80211_crypt_delayed_deinit(ieee, crypt);
6046 sec.flags |= SEC_ENABLED;
6048 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6049 if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
6050 request_module("ieee80211_crypt_wep");
6051 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6052 } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
6053 request_module("ieee80211_crypt_tkip");
6054 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6055 } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
6056 request_module("ieee80211_crypt_ccmp");
6057 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6060 IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n",
6061 dev->name, param->u.crypt.alg);
6062 param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG;
6067 if (*crypt == NULL || (*crypt)->ops != ops) {
6068 struct ieee80211_crypt_data *new_crypt;
6070 ieee80211_crypt_delayed_deinit(ieee, crypt);
6072 new_crypt = (struct ieee80211_crypt_data *)
6073 kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL);
6074 if (new_crypt == NULL) {
6078 memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
6079 new_crypt->ops = ops;
6080 if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
6081 new_crypt->priv = new_crypt->ops->init(param->u.crypt.idx);
6083 if (new_crypt->priv == NULL) {
6085 param->u.crypt.err =
6086 IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED;
6094 if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
6095 (*crypt)->ops->set_key(param->u.crypt.key,
6096 param->u.crypt.key_len, param->u.crypt.seq,
6097 (*crypt)->priv) < 0) {
6098 IPW_DEBUG_INFO("%s: key setting failed\n",
6100 param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED;
6105 if (param->u.crypt.set_tx){
6106 ieee->tx_keyidx = param->u.crypt.idx;
6107 sec.active_key = param->u.crypt.idx;
6108 sec.flags |= SEC_ACTIVE_KEY;
6111 if (ops->name != NULL){
6113 if (strcmp(ops->name, "WEP") == 0) {
6114 memcpy(sec.keys[param->u.crypt.idx], param->u.crypt.key, param->u.crypt.key_len);
6115 sec.key_sizes[param->u.crypt.idx] = param->u.crypt.key_len;
6116 sec.flags |= (1 << param->u.crypt.idx);
6117 sec.flags |= SEC_LEVEL;
6118 sec.level = SEC_LEVEL_1;
6119 } else if (strcmp(ops->name, "TKIP") == 0) {
6120 sec.flags |= SEC_LEVEL;
6121 sec.level = SEC_LEVEL_2;
6122 } else if (strcmp(ops->name, "CCMP") == 0) {
6123 sec.flags |= SEC_LEVEL;
6124 sec.level = SEC_LEVEL_3;
6128 if (ieee->set_security)
6129 ieee->set_security(ieee->dev, &sec);
6131 /* Do not reset port if card is in Managed mode since resetting will
6132 * generate new IEEE 802.11 authentication which may end up in looping
6133 * with IEEE 802.1X. If your hardware requires a reset after WEP
6134 * configuration (for example... Prism2), implement the reset_port in
6135 * the callbacks structures used to initialize the 802.11 stack. */
6136 if (ieee->reset_on_keychange &&
6137 ieee->iw_mode != IW_MODE_INFRA &&
6139 ieee->reset_port(dev)) {
6140 IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name);
6141 param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED;
6149 static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p){
6151 struct ipw2100_param *param;
6154 IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length);
6156 if (p->length < sizeof(struct ipw2100_param) || !p->pointer)
6159 param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL);
6163 if (copy_from_user(param, p->pointer, p->length)){
6168 switch (param->cmd){
6170 case IPW2100_CMD_SET_WPA_PARAM:
6171 ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name,
6172 param->u.wpa_param.value);
6175 case IPW2100_CMD_SET_WPA_IE:
6176 ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length);
6179 case IPW2100_CMD_SET_ENCRYPTION:
6180 ret = ipw2100_wpa_set_encryption(dev, param, p->length);
6183 case IPW2100_CMD_MLME:
6184 ret = ipw2100_wpa_mlme(dev, param->u.mlme.command,
6185 param->u.mlme.reason_code);
6189 printk(KERN_ERR DRV_NAME ": %s: Unknown WPA supplicant request: %d\n",
6190 dev->name, param->cmd);
6195 if (ret == 0 && copy_to_user(p->pointer, param, p->length))
6201 #endif /* CONFIG_IEEE80211_WPA */
6203 static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6205 #ifdef CONFIG_IEEE80211_WPA
6206 struct iwreq *wrq = (struct iwreq *) rq;
6209 case IPW2100_IOCTL_WPA_SUPPLICANT:
6210 ret = ipw2100_wpa_supplicant(dev, &wrq->u.data);
6217 #endif /* CONFIG_IEEE80211_WPA */
6223 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
6224 struct ethtool_drvinfo *info)
6226 struct ipw2100_priv *priv = ieee80211_priv(dev);
6227 char fw_ver[64], ucode_ver[64];
6229 strcpy(info->driver, DRV_NAME);
6230 strcpy(info->version, DRV_VERSION);
6232 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
6233 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
6235 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
6236 fw_ver, priv->eeprom_version, ucode_ver);
6238 strcpy(info->bus_info, pci_name(priv->pci_dev));
6241 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
6243 struct ipw2100_priv *priv = ieee80211_priv(dev);
6244 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
6248 static struct ethtool_ops ipw2100_ethtool_ops = {
6249 .get_link = ipw2100_ethtool_get_link,
6250 .get_drvinfo = ipw_ethtool_get_drvinfo,
6253 static void ipw2100_hang_check(void *adapter)
6255 struct ipw2100_priv *priv = adapter;
6256 unsigned long flags;
6257 u32 rtc = 0xa5a5a5a5;
6258 u32 len = sizeof(rtc);
6261 spin_lock_irqsave(&priv->low_lock, flags);
6263 if (priv->fatal_error != 0) {
6264 /* If fatal_error is set then we need to restart */
6265 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6266 priv->net_dev->name);
6269 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
6270 (rtc == priv->last_rtc)) {
6271 /* Check if firmware is hung */
6272 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6273 priv->net_dev->name);
6280 priv->stop_hang_check = 1;
6283 /* Restart the NIC */
6284 schedule_reset(priv);
6287 priv->last_rtc = rtc;
6289 if (!priv->stop_hang_check)
6290 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
6292 spin_unlock_irqrestore(&priv->low_lock, flags);
6296 static void ipw2100_rf_kill(void *adapter)
6298 struct ipw2100_priv *priv = adapter;
6299 unsigned long flags;
6301 spin_lock_irqsave(&priv->low_lock, flags);
6303 if (rf_kill_active(priv)) {
6304 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6305 if (!priv->stop_rf_kill)
6306 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
6310 /* RF Kill is now disabled, so bring the device back up */
6312 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6313 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6315 schedule_reset(priv);
6317 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6321 spin_unlock_irqrestore(&priv->low_lock, flags);
6324 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
6326 /* Look into using netdev destructor to shutdown ieee80211? */
6328 static struct net_device *ipw2100_alloc_device(
6329 struct pci_dev *pci_dev,
6330 void __iomem *base_addr,
6331 unsigned long mem_start,
6332 unsigned long mem_len)
6334 struct ipw2100_priv *priv;
6335 struct net_device *dev;
6337 dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
6340 priv = ieee80211_priv(dev);
6341 priv->ieee = netdev_priv(dev);
6342 priv->pci_dev = pci_dev;
6343 priv->net_dev = dev;
6345 priv->ieee->hard_start_xmit = ipw2100_tx;
6346 priv->ieee->set_security = shim__set_security;
6348 dev->open = ipw2100_open;
6349 dev->stop = ipw2100_close;
6350 dev->init = ipw2100_net_init;
6351 dev->do_ioctl = ipw2100_ioctl;
6352 dev->get_stats = ipw2100_stats;
6353 dev->ethtool_ops = &ipw2100_ethtool_ops;
6354 dev->tx_timeout = ipw2100_tx_timeout;
6355 dev->wireless_handlers = &ipw2100_wx_handler_def;
6356 dev->get_wireless_stats = ipw2100_wx_wireless_stats;
6357 dev->set_mac_address = ipw2100_set_address;
6358 dev->watchdog_timeo = 3*HZ;
6361 dev->base_addr = (unsigned long)base_addr;
6362 dev->mem_start = mem_start;
6363 dev->mem_end = dev->mem_start + mem_len - 1;
6365 /* NOTE: We don't use the wireless_handlers hook
6366 * in dev as the system will start throwing WX requests
6367 * to us before we're actually initialized and it just
6368 * ends up causing problems. So, we just handle
6369 * the WX extensions through the ipw2100_ioctl interface */
6372 /* memset() puts everything to 0, so we only have explicitely set
6373 * those values that need to be something else */
6375 /* If power management is turned on, default to AUTO mode */
6376 priv->power_mode = IPW_POWER_AUTO;
6380 #ifdef CONFIG_IEEE80211_WPA
6381 priv->ieee->wpa_enabled = 0;
6382 priv->ieee->tkip_countermeasures = 0;
6383 priv->ieee->drop_unencrypted = 0;
6384 priv->ieee->privacy_invoked = 0;
6385 priv->ieee->ieee802_1x = 1;
6386 #endif /* CONFIG_IEEE80211_WPA */
6388 /* Set module parameters */
6391 priv->ieee->iw_mode = IW_MODE_ADHOC;
6393 #ifdef CONFIG_IPW2100_MONITOR
6395 priv->ieee->iw_mode = IW_MODE_MONITOR;
6400 priv->ieee->iw_mode = IW_MODE_INFRA;
6405 priv->status |= STATUS_RF_KILL_SW;
6408 ((channel >= REG_MIN_CHANNEL) &&
6409 (channel <= REG_MAX_CHANNEL))) {
6410 priv->config |= CFG_STATIC_CHANNEL;
6411 priv->channel = channel;
6415 priv->config |= CFG_ASSOCIATE;
6417 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6418 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6419 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6420 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6421 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6422 priv->tx_power = IPW_TX_POWER_DEFAULT;
6423 priv->tx_rates = DEFAULT_TX_RATES;
6425 strcpy(priv->nick, "ipw2100");
6427 spin_lock_init(&priv->low_lock);
6428 sema_init(&priv->action_sem, 1);
6429 sema_init(&priv->adapter_sem, 1);
6431 init_waitqueue_head(&priv->wait_command_queue);
6433 netif_carrier_off(dev);
6435 INIT_LIST_HEAD(&priv->msg_free_list);
6436 INIT_LIST_HEAD(&priv->msg_pend_list);
6437 INIT_STAT(&priv->msg_free_stat);
6438 INIT_STAT(&priv->msg_pend_stat);
6440 INIT_LIST_HEAD(&priv->tx_free_list);
6441 INIT_LIST_HEAD(&priv->tx_pend_list);
6442 INIT_STAT(&priv->tx_free_stat);
6443 INIT_STAT(&priv->tx_pend_stat);
6445 INIT_LIST_HEAD(&priv->fw_pend_list);
6446 INIT_STAT(&priv->fw_pend_stat);
6449 #ifdef CONFIG_SOFTWARE_SUSPEND2
6450 priv->workqueue = create_workqueue(DRV_NAME, 0);
6452 priv->workqueue = create_workqueue(DRV_NAME);
6454 INIT_WORK(&priv->reset_work,
6455 (void (*)(void *))ipw2100_reset_adapter, priv);
6456 INIT_WORK(&priv->security_work,
6457 (void (*)(void *))ipw2100_security_work, priv);
6458 INIT_WORK(&priv->wx_event_work,
6459 (void (*)(void *))ipw2100_wx_event_work, priv);
6460 INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
6461 INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
6463 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6464 ipw2100_irq_tasklet, (unsigned long)priv);
6466 /* NOTE: We do not start the deferred work for status checks yet */
6467 priv->stop_rf_kill = 1;
6468 priv->stop_hang_check = 1;
6473 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6474 const struct pci_device_id *ent)
6476 unsigned long mem_start, mem_len, mem_flags;
6477 void __iomem *base_addr = NULL;
6478 struct net_device *dev = NULL;
6479 struct ipw2100_priv *priv = NULL;
6484 IPW_DEBUG_INFO("enter\n");
6486 mem_start = pci_resource_start(pci_dev, 0);
6487 mem_len = pci_resource_len(pci_dev, 0);
6488 mem_flags = pci_resource_flags(pci_dev, 0);
6490 if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
6491 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6496 base_addr = ioremap_nocache(mem_start, mem_len);
6498 printk(KERN_WARNING DRV_NAME
6499 "Error calling ioremap_nocache.\n");
6504 /* allocate and initialize our net_device */
6505 dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
6507 printk(KERN_WARNING DRV_NAME
6508 "Error calling ipw2100_alloc_device.\n");
6513 /* set up PCI mappings for device */
6514 err = pci_enable_device(pci_dev);
6516 printk(KERN_WARNING DRV_NAME
6517 "Error calling pci_enable_device.\n");
6521 priv = ieee80211_priv(dev);
6523 pci_set_master(pci_dev);
6524 pci_set_drvdata(pci_dev, priv);
6526 err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
6528 printk(KERN_WARNING DRV_NAME
6529 "Error calling pci_set_dma_mask.\n");
6530 pci_disable_device(pci_dev);
6534 err = pci_request_regions(pci_dev, DRV_NAME);
6536 printk(KERN_WARNING DRV_NAME
6537 "Error calling pci_request_regions.\n");
6538 pci_disable_device(pci_dev);
6542 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6543 * PCI Tx retries from interfering with C3 CPU state */
6544 pci_read_config_dword(pci_dev, 0x40, &val);
6545 if ((val & 0x0000ff00) != 0)
6546 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6548 pci_set_power_state(pci_dev, PCI_D0);
6550 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6551 printk(KERN_WARNING DRV_NAME
6552 "Device not found via register read.\n");
6557 SET_NETDEV_DEV(dev, &pci_dev->dev);
6559 /* Force interrupts to be shut off on the device */
6560 priv->status |= STATUS_INT_ENABLED;
6561 ipw2100_disable_interrupts(priv);
6563 /* Allocate and initialize the Tx/Rx queues and lists */
6564 if (ipw2100_queues_allocate(priv)) {
6565 printk(KERN_WARNING DRV_NAME
6566 "Error calilng ipw2100_queues_allocate.\n");
6570 ipw2100_queues_initialize(priv);
6572 err = request_irq(pci_dev->irq,
6573 ipw2100_interrupt, SA_SHIRQ,
6576 printk(KERN_WARNING DRV_NAME
6577 "Error calling request_irq: %d.\n",
6581 dev->irq = pci_dev->irq;
6583 IPW_DEBUG_INFO("Attempting to register device...\n");
6585 SET_MODULE_OWNER(dev);
6587 printk(KERN_INFO DRV_NAME
6588 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6590 /* Bring up the interface. Pre 0.46, after we registered the
6591 * network device we would call ipw2100_up. This introduced a race
6592 * condition with newer hotplug configurations (network was coming
6593 * up and making calls before the device was initialized).
6595 * If we called ipw2100_up before we registered the device, then the
6596 * device name wasn't registered. So, we instead use the net_dev->init
6597 * member to call a function that then just turns and calls ipw2100_up.
6598 * net_dev->init is called after name allocation but before the
6599 * notifier chain is called */
6600 down(&priv->action_sem);
6601 err = register_netdev(dev);
6603 printk(KERN_WARNING DRV_NAME
6604 "Error calling register_netdev.\n");
6609 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6611 /* perform this after register_netdev so that dev->name is set */
6612 sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6613 netif_carrier_off(dev);
6615 /* If the RF Kill switch is disabled, go ahead and complete the
6616 * startup sequence */
6617 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6618 /* Enable the adapter - sends HOST_COMPLETE */
6619 if (ipw2100_enable_adapter(priv)) {
6620 printk(KERN_WARNING DRV_NAME
6621 ": %s: failed in call to enable adapter.\n",
6622 priv->net_dev->name);
6623 ipw2100_hw_stop_adapter(priv);
6628 /* Start a scan . . . */
6629 ipw2100_set_scan_options(priv);
6630 ipw2100_start_scan(priv);
6633 IPW_DEBUG_INFO("exit\n");
6635 priv->status |= STATUS_INITIALIZED;
6637 up(&priv->action_sem);
6642 up(&priv->action_sem);
6647 unregister_netdev(dev);
6649 ipw2100_hw_stop_adapter(priv);
6651 ipw2100_disable_interrupts(priv);
6654 free_irq(dev->irq, priv);
6656 ipw2100_kill_workqueue(priv);
6658 /* These are safe to call even if they weren't allocated */
6659 ipw2100_queues_free(priv);
6660 sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6662 free_ieee80211(dev);
6663 pci_set_drvdata(pci_dev, NULL);
6669 pci_release_regions(pci_dev);
6670 pci_disable_device(pci_dev);
6675 static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6677 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6678 struct net_device *dev;
6681 down(&priv->action_sem);
6683 priv->status &= ~STATUS_INITIALIZED;
6685 dev = priv->net_dev;
6686 sysfs_remove_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6689 if (ipw2100_firmware.version)
6690 ipw2100_release_firmware(priv, &ipw2100_firmware);
6692 /* Take down the hardware */
6695 /* Release the semaphore so that the network subsystem can
6696 * complete any needed calls into the driver... */
6697 up(&priv->action_sem);
6699 /* Unregister the device first - this results in close()
6700 * being called if the device is open. If we free storage
6701 * first, then close() will crash. */
6702 unregister_netdev(dev);
6704 /* ipw2100_down will ensure that there is no more pending work
6705 * in the workqueue's, so we can safely remove them now. */
6706 ipw2100_kill_workqueue(priv);
6708 ipw2100_queues_free(priv);
6710 /* Free potential debugging firmware snapshot */
6711 ipw2100_snapshot_free(priv);
6714 free_irq(dev->irq, priv);
6717 iounmap((void __iomem *)dev->base_addr);
6719 free_ieee80211(dev);
6722 pci_release_regions(pci_dev);
6723 pci_disable_device(pci_dev);
6725 IPW_DEBUG_INFO("exit\n");
6730 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
6731 static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state)
6733 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6736 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6737 struct net_device *dev = priv->net_dev;
6739 IPW_DEBUG_INFO("%s: Going into suspend...\n",
6742 down(&priv->action_sem);
6743 if (priv->status & STATUS_INITIALIZED) {
6744 /* Take down the device; powers it off, etc. */
6748 /* Remove the PRESENT state of the device */
6749 netif_device_detach(dev);
6751 pci_save_state(pci_dev);
6752 pci_disable_device (pci_dev);
6753 pci_set_power_state(pci_dev, PCI_D3hot);
6755 up(&priv->action_sem);
6760 static int ipw2100_resume(struct pci_dev *pci_dev)
6762 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6763 struct net_device *dev = priv->net_dev;
6766 if (IPW2100_PM_DISABLED)
6769 down(&priv->action_sem);
6771 IPW_DEBUG_INFO("%s: Coming out of suspend...\n",
6774 pci_set_power_state(pci_dev, PCI_D0);
6775 pci_enable_device(pci_dev);
6776 pci_restore_state(pci_dev);
6779 * Suspend/Resume resets the PCI configuration space, so we have to
6780 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6781 * from interfering with C3 CPU state. pci_restore_state won't help
6782 * here since it only restores the first 64 bytes pci config header.
6784 pci_read_config_dword(pci_dev, 0x40, &val);
6785 if ((val & 0x0000ff00) != 0)
6786 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6788 /* Set the device back into the PRESENT state; this will also wake
6789 * the queue of needed */
6790 netif_device_attach(dev);
6792 /* Bring the device back up */
6793 if (!(priv->status & STATUS_RF_KILL_SW))
6794 ipw2100_up(priv, 0);
6796 up(&priv->action_sem);
6803 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6805 static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
6806 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6807 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6808 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6809 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6810 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6811 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6812 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6813 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6814 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6815 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6816 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6817 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6818 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6820 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6821 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6822 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6823 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6824 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6826 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6827 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6828 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6829 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6830 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6831 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6832 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6834 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6836 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6837 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6838 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6839 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6840 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6841 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6842 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6844 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6845 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6846 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6847 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6848 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6849 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6851 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6855 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6857 static struct pci_driver ipw2100_pci_driver = {
6859 .id_table = ipw2100_pci_id_table,
6860 .probe = ipw2100_pci_init_one,
6861 .remove = __devexit_p(ipw2100_pci_remove_one),
6863 .suspend = ipw2100_suspend,
6864 .resume = ipw2100_resume,
6870 * Initialize the ipw2100 driver/module
6872 * @returns 0 if ok, < 0 errno node con error.
6874 * Note: we cannot init the /proc stuff until the PCI driver is there,
6875 * or we risk an unlikely race condition on someone accessing
6876 * uninitialized data in the PCI dev struct through /proc.
6878 static int __init ipw2100_init(void)
6882 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6883 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6885 #ifdef CONFIG_IEEE80211_NOWEP
6886 IPW_DEBUG_INFO(DRV_NAME ": Compiled with WEP disabled.\n");
6889 ret = pci_module_init(&ipw2100_pci_driver);
6891 #ifdef CONFIG_IPW_DEBUG
6892 ipw2100_debug_level = debug;
6893 driver_create_file(&ipw2100_pci_driver.driver,
6894 &driver_attr_debug_level);
6902 * Cleanup ipw2100 driver registration
6904 static void __exit ipw2100_exit(void)
6906 /* FIXME: IPG: check that we have no instances of the devices open */
6907 #ifdef CONFIG_IPW_DEBUG
6908 driver_remove_file(&ipw2100_pci_driver.driver,
6909 &driver_attr_debug_level);
6911 pci_unregister_driver(&ipw2100_pci_driver);
6914 module_init(ipw2100_init);
6915 module_exit(ipw2100_exit);
6917 #define WEXT_USECHANNELS 1
6919 static const long ipw2100_frequencies[] = {
6920 2412, 2417, 2422, 2427,
6921 2432, 2437, 2442, 2447,
6922 2452, 2457, 2462, 2467,
6926 #define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
6927 sizeof(ipw2100_frequencies[0]))
6929 static const long ipw2100_rates_11b[] = {
6936 #define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
6938 static int ipw2100_wx_get_name(struct net_device *dev,
6939 struct iw_request_info *info,
6940 union iwreq_data *wrqu, char *extra)
6943 * This can be called at any time. No action lock required
6946 struct ipw2100_priv *priv = ieee80211_priv(dev);
6947 if (!(priv->status & STATUS_ASSOCIATED))
6948 strcpy(wrqu->name, "unassociated");
6950 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6952 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6957 static int ipw2100_wx_set_freq(struct net_device *dev,
6958 struct iw_request_info *info,
6959 union iwreq_data *wrqu, char *extra)
6961 struct ipw2100_priv *priv = ieee80211_priv(dev);
6962 struct iw_freq *fwrq = &wrqu->freq;
6965 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6968 down(&priv->action_sem);
6969 if (!(priv->status & STATUS_INITIALIZED)) {
6974 /* if setting by freq convert to channel */
6976 if ((fwrq->m >= (int) 2.412e8 &&
6977 fwrq->m <= (int) 2.487e8)) {
6978 int f = fwrq->m / 100000;
6981 while ((c < REG_MAX_CHANNEL) &&
6982 (f != ipw2100_frequencies[c]))
6985 /* hack to fall through */
6991 if (fwrq->e > 0 || fwrq->m > 1000)
6993 else { /* Set the channel */
6994 IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
6995 err = ipw2100_set_channel(priv, fwrq->m, 0);
6999 up(&priv->action_sem);
7004 static int ipw2100_wx_get_freq(struct net_device *dev,
7005 struct iw_request_info *info,
7006 union iwreq_data *wrqu, char *extra)
7009 * This can be called at any time. No action lock required
7012 struct ipw2100_priv *priv = ieee80211_priv(dev);
7016 /* If we are associated, trying to associate, or have a statically
7017 * configured CHANNEL then return that; otherwise return ANY */
7018 if (priv->config & CFG_STATIC_CHANNEL ||
7019 priv->status & STATUS_ASSOCIATED)
7020 wrqu->freq.m = priv->channel;
7024 IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
7029 static int ipw2100_wx_set_mode(struct net_device *dev,
7030 struct iw_request_info *info,
7031 union iwreq_data *wrqu, char *extra)
7033 struct ipw2100_priv *priv = ieee80211_priv(dev);
7036 IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
7038 if (wrqu->mode == priv->ieee->iw_mode)
7041 down(&priv->action_sem);
7042 if (!(priv->status & STATUS_INITIALIZED)) {
7047 switch (wrqu->mode) {
7048 #ifdef CONFIG_IPW2100_MONITOR
7049 case IW_MODE_MONITOR:
7050 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7052 #endif /* CONFIG_IPW2100_MONITOR */
7054 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
7059 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
7064 up(&priv->action_sem);
7068 static int ipw2100_wx_get_mode(struct net_device *dev,
7069 struct iw_request_info *info,
7070 union iwreq_data *wrqu, char *extra)
7073 * This can be called at any time. No action lock required
7076 struct ipw2100_priv *priv = ieee80211_priv(dev);
7078 wrqu->mode = priv->ieee->iw_mode;
7079 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
7085 #define POWER_MODES 5
7087 /* Values are in microsecond */
7088 static const s32 timeout_duration[POWER_MODES] = {
7096 static const s32 period_duration[POWER_MODES] = {
7104 static int ipw2100_wx_get_range(struct net_device *dev,
7105 struct iw_request_info *info,
7106 union iwreq_data *wrqu, char *extra)
7109 * This can be called at any time. No action lock required
7112 struct ipw2100_priv *priv = ieee80211_priv(dev);
7113 struct iw_range *range = (struct iw_range *)extra;
7117 wrqu->data.length = sizeof(*range);
7118 memset(range, 0, sizeof(*range));
7120 /* Let's try to keep this struct in the same order as in
7121 * linux/include/wireless.h
7124 /* TODO: See what values we can set, and remove the ones we can't
7125 * set, or fill them with some default data.
7128 /* ~5 Mb/s real (802.11b) */
7129 range->throughput = 5 * 1000 * 1000;
7131 // range->sensitivity; /* signal level threshold range */
7133 range->max_qual.qual = 100;
7134 /* TODO: Find real max RSSI and stick here */
7135 range->max_qual.level = 0;
7136 range->max_qual.noise = 0;
7137 range->max_qual.updated = 7; /* Updated all three */
7139 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
7140 /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
7141 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
7142 range->avg_qual.noise = 0;
7143 range->avg_qual.updated = 7; /* Updated all three */
7145 range->num_bitrates = RATE_COUNT;
7147 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
7148 range->bitrate[i] = ipw2100_rates_11b[i];
7151 range->min_rts = MIN_RTS_THRESHOLD;
7152 range->max_rts = MAX_RTS_THRESHOLD;
7153 range->min_frag = MIN_FRAG_THRESHOLD;
7154 range->max_frag = MAX_FRAG_THRESHOLD;
7156 range->min_pmp = period_duration[0]; /* Minimal PM period */
7157 range->max_pmp = period_duration[POWER_MODES-1];/* Maximal PM period */
7158 range->min_pmt = timeout_duration[POWER_MODES-1]; /* Minimal PM timeout */
7159 range->max_pmt = timeout_duration[0];/* Maximal PM timeout */
7161 /* How to decode max/min PM period */
7162 range->pmp_flags = IW_POWER_PERIOD;
7163 /* How to decode max/min PM period */
7164 range->pmt_flags = IW_POWER_TIMEOUT;
7165 /* What PM options are supported */
7166 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
7168 range->encoding_size[0] = 5;
7169 range->encoding_size[1] = 13; /* Different token sizes */
7170 range->num_encoding_sizes = 2; /* Number of entry in the list */
7171 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
7172 // range->encoding_login_index; /* token index for login token */
7174 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
7175 range->txpower_capa = IW_TXPOW_DBM;
7176 range->num_txpower = IW_MAX_TXPOWER;
7177 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16); i < IW_MAX_TXPOWER;
7178 i++, level -= ((IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM) * 16) /
7179 (IW_MAX_TXPOWER - 1))
7180 range->txpower[i] = level / 16;
7182 range->txpower_capa = 0;
7183 range->num_txpower = 0;
7187 /* Set the Wireless Extension versions */
7188 range->we_version_compiled = WIRELESS_EXT;
7189 range->we_version_source = 16;
7191 // range->retry_capa; /* What retry options are supported */
7192 // range->retry_flags; /* How to decode max/min retry limit */
7193 // range->r_time_flags; /* How to decode max/min retry life */
7194 // range->min_retry; /* Minimal number of retries */
7195 // range->max_retry; /* Maximal number of retries */
7196 // range->min_r_time; /* Minimal retry lifetime */
7197 // range->max_r_time; /* Maximal retry lifetime */
7199 range->num_channels = FREQ_COUNT;
7202 for (i = 0; i < FREQ_COUNT; i++) {
7203 // TODO: Include only legal frequencies for some countries
7204 // if (local->channel_mask & (1 << i)) {
7205 range->freq[val].i = i + 1;
7206 range->freq[val].m = ipw2100_frequencies[i] * 100000;
7207 range->freq[val].e = 1;
7210 if (val == IW_MAX_FREQUENCIES)
7213 range->num_frequency = val;
7215 IPW_DEBUG_WX("GET Range\n");
7220 static int ipw2100_wx_set_wap(struct net_device *dev,
7221 struct iw_request_info *info,
7222 union iwreq_data *wrqu, char *extra)
7224 struct ipw2100_priv *priv = ieee80211_priv(dev);
7227 static const unsigned char any[] = {
7228 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
7230 static const unsigned char off[] = {
7231 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
7235 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
7238 down(&priv->action_sem);
7239 if (!(priv->status & STATUS_INITIALIZED)) {
7244 if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
7245 !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
7246 /* we disable mandatory BSSID association */
7247 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7248 priv->config &= ~CFG_STATIC_BSSID;
7249 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
7253 priv->config |= CFG_STATIC_BSSID;
7254 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
7256 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
7258 IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
7259 wrqu->ap_addr.sa_data[0] & 0xff,
7260 wrqu->ap_addr.sa_data[1] & 0xff,
7261 wrqu->ap_addr.sa_data[2] & 0xff,
7262 wrqu->ap_addr.sa_data[3] & 0xff,
7263 wrqu->ap_addr.sa_data[4] & 0xff,
7264 wrqu->ap_addr.sa_data[5] & 0xff);
7267 up(&priv->action_sem);
7271 static int ipw2100_wx_get_wap(struct net_device *dev,
7272 struct iw_request_info *info,
7273 union iwreq_data *wrqu, char *extra)
7276 * This can be called at any time. No action lock required
7279 struct ipw2100_priv *priv = ieee80211_priv(dev);
7281 /* If we are associated, trying to associate, or have a statically
7282 * configured BSSID then return that; otherwise return ANY */
7283 if (priv->config & CFG_STATIC_BSSID ||
7284 priv->status & STATUS_ASSOCIATED) {
7285 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
7286 memcpy(wrqu->ap_addr.sa_data, &priv->bssid, ETH_ALEN);
7288 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
7290 IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
7291 MAC_ARG(wrqu->ap_addr.sa_data));
7295 static int ipw2100_wx_set_essid(struct net_device *dev,
7296 struct iw_request_info *info,
7297 union iwreq_data *wrqu, char *extra)
7299 struct ipw2100_priv *priv = ieee80211_priv(dev);
7300 char *essid = ""; /* ANY */
7304 down(&priv->action_sem);
7305 if (!(priv->status & STATUS_INITIALIZED)) {
7310 if (wrqu->essid.flags && wrqu->essid.length) {
7311 length = wrqu->essid.length - 1;
7316 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7317 priv->config &= ~CFG_STATIC_ESSID;
7318 err = ipw2100_set_essid(priv, NULL, 0, 0);
7322 length = min(length, IW_ESSID_MAX_SIZE);
7324 priv->config |= CFG_STATIC_ESSID;
7326 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
7327 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7332 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
7335 priv->essid_len = length;
7336 memcpy(priv->essid, essid, priv->essid_len);
7338 err = ipw2100_set_essid(priv, essid, length, 0);
7341 up(&priv->action_sem);
7345 static int ipw2100_wx_get_essid(struct net_device *dev,
7346 struct iw_request_info *info,
7347 union iwreq_data *wrqu, char *extra)
7350 * This can be called at any time. No action lock required
7353 struct ipw2100_priv *priv = ieee80211_priv(dev);
7355 /* If we are associated, trying to associate, or have a statically
7356 * configured ESSID then return that; otherwise return ANY */
7357 if (priv->config & CFG_STATIC_ESSID ||
7358 priv->status & STATUS_ASSOCIATED) {
7359 IPW_DEBUG_WX("Getting essid: '%s'\n",
7360 escape_essid(priv->essid, priv->essid_len));
7361 memcpy(extra, priv->essid, priv->essid_len);
7362 wrqu->essid.length = priv->essid_len;
7363 wrqu->essid.flags = 1; /* active */
7365 IPW_DEBUG_WX("Getting essid: ANY\n");
7366 wrqu->essid.length = 0;
7367 wrqu->essid.flags = 0; /* active */
7373 static int ipw2100_wx_set_nick(struct net_device *dev,
7374 struct iw_request_info *info,
7375 union iwreq_data *wrqu, char *extra)
7378 * This can be called at any time. No action lock required
7381 struct ipw2100_priv *priv = ieee80211_priv(dev);
7383 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7386 wrqu->data.length = min((size_t)wrqu->data.length, sizeof(priv->nick));
7387 memset(priv->nick, 0, sizeof(priv->nick));
7388 memcpy(priv->nick, extra, wrqu->data.length);
7390 IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
7395 static int ipw2100_wx_get_nick(struct net_device *dev,
7396 struct iw_request_info *info,
7397 union iwreq_data *wrqu, char *extra)
7400 * This can be called at any time. No action lock required
7403 struct ipw2100_priv *priv = ieee80211_priv(dev);
7405 wrqu->data.length = strlen(priv->nick) + 1;
7406 memcpy(extra, priv->nick, wrqu->data.length);
7407 wrqu->data.flags = 1; /* active */
7409 IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
7414 static int ipw2100_wx_set_rate(struct net_device *dev,
7415 struct iw_request_info *info,
7416 union iwreq_data *wrqu, char *extra)
7418 struct ipw2100_priv *priv = ieee80211_priv(dev);
7419 u32 target_rate = wrqu->bitrate.value;
7423 down(&priv->action_sem);
7424 if (!(priv->status & STATUS_INITIALIZED)) {
7431 if (target_rate == 1000000 ||
7432 (!wrqu->bitrate.fixed && target_rate > 1000000))
7433 rate |= TX_RATE_1_MBIT;
7434 if (target_rate == 2000000 ||
7435 (!wrqu->bitrate.fixed && target_rate > 2000000))
7436 rate |= TX_RATE_2_MBIT;
7437 if (target_rate == 5500000 ||
7438 (!wrqu->bitrate.fixed && target_rate > 5500000))
7439 rate |= TX_RATE_5_5_MBIT;
7440 if (target_rate == 11000000 ||
7441 (!wrqu->bitrate.fixed && target_rate > 11000000))
7442 rate |= TX_RATE_11_MBIT;
7444 rate = DEFAULT_TX_RATES;
7446 err = ipw2100_set_tx_rates(priv, rate, 0);
7448 IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
7450 up(&priv->action_sem);
7455 static int ipw2100_wx_get_rate(struct net_device *dev,
7456 struct iw_request_info *info,
7457 union iwreq_data *wrqu, char *extra)
7459 struct ipw2100_priv *priv = ieee80211_priv(dev);
7461 int len = sizeof(val);
7464 if (!(priv->status & STATUS_ENABLED) ||
7465 priv->status & STATUS_RF_KILL_MASK ||
7466 !(priv->status & STATUS_ASSOCIATED)) {
7467 wrqu->bitrate.value = 0;
7471 down(&priv->action_sem);
7472 if (!(priv->status & STATUS_INITIALIZED)) {
7477 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7479 IPW_DEBUG_WX("failed querying ordinals.\n");
7483 switch (val & TX_RATE_MASK) {
7484 case TX_RATE_1_MBIT:
7485 wrqu->bitrate.value = 1000000;
7487 case TX_RATE_2_MBIT:
7488 wrqu->bitrate.value = 2000000;
7490 case TX_RATE_5_5_MBIT:
7491 wrqu->bitrate.value = 5500000;
7493 case TX_RATE_11_MBIT:
7494 wrqu->bitrate.value = 11000000;
7497 wrqu->bitrate.value = 0;
7500 IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
7503 up(&priv->action_sem);
7507 static int ipw2100_wx_set_rts(struct net_device *dev,
7508 struct iw_request_info *info,
7509 union iwreq_data *wrqu, char *extra)
7511 struct ipw2100_priv *priv = ieee80211_priv(dev);
7514 /* Auto RTS not yet supported */
7515 if (wrqu->rts.fixed == 0)
7518 down(&priv->action_sem);
7519 if (!(priv->status & STATUS_INITIALIZED)) {
7524 if (wrqu->rts.disabled)
7525 value = priv->rts_threshold | RTS_DISABLED;
7527 if (wrqu->rts.value < 1 ||
7528 wrqu->rts.value > 2304) {
7532 value = wrqu->rts.value;
7535 err = ipw2100_set_rts_threshold(priv, value);
7537 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
7539 up(&priv->action_sem);
7543 static int ipw2100_wx_get_rts(struct net_device *dev,
7544 struct iw_request_info *info,
7545 union iwreq_data *wrqu, char *extra)
7548 * This can be called at any time. No action lock required
7551 struct ipw2100_priv *priv = ieee80211_priv(dev);
7553 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7554 wrqu->rts.fixed = 1; /* no auto select */
7556 /* If RTS is set to the default value, then it is disabled */
7557 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7559 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
7564 static int ipw2100_wx_set_txpow(struct net_device *dev,
7565 struct iw_request_info *info,
7566 union iwreq_data *wrqu, char *extra)
7568 struct ipw2100_priv *priv = ieee80211_priv(dev);
7571 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7574 if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
7575 value = IPW_TX_POWER_DEFAULT;
7577 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7578 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7581 value = (wrqu->txpower.value - IPW_TX_POWER_MIN_DBM) * 16 /
7582 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
7585 down(&priv->action_sem);
7586 if (!(priv->status & STATUS_INITIALIZED)) {
7591 err = ipw2100_set_tx_power(priv, value);
7593 IPW_DEBUG_WX("SET TX Power -> %d \n", value);
7596 up(&priv->action_sem);
7600 static int ipw2100_wx_get_txpow(struct net_device *dev,
7601 struct iw_request_info *info,
7602 union iwreq_data *wrqu, char *extra)
7605 * This can be called at any time. No action lock required
7608 struct ipw2100_priv *priv = ieee80211_priv(dev);
7610 if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
7611 wrqu->power.disabled = 1;
7615 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7616 wrqu->power.fixed = 0;
7617 wrqu->power.value = IPW_TX_POWER_MAX_DBM;
7618 wrqu->power.disabled = 1;
7620 wrqu->power.disabled = 0;
7621 wrqu->power.fixed = 1;
7624 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM)) /
7625 (IPW_TX_POWER_MAX - IPW_TX_POWER_MIN) +
7626 IPW_TX_POWER_MIN_DBM;
7629 wrqu->power.flags = IW_TXPOW_DBM;
7631 IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
7636 static int ipw2100_wx_set_frag(struct net_device *dev,
7637 struct iw_request_info *info,
7638 union iwreq_data *wrqu, char *extra)
7641 * This can be called at any time. No action lock required
7644 struct ipw2100_priv *priv = ieee80211_priv(dev);
7646 if (!wrqu->frag.fixed)
7649 if (wrqu->frag.disabled) {
7650 priv->frag_threshold |= FRAG_DISABLED;
7651 priv->ieee->fts = DEFAULT_FTS;
7653 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7654 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7657 priv->ieee->fts = wrqu->frag.value & ~0x1;
7658 priv->frag_threshold = priv->ieee->fts;
7661 IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
7666 static int ipw2100_wx_get_frag(struct net_device *dev,
7667 struct iw_request_info *info,
7668 union iwreq_data *wrqu, char *extra)
7671 * This can be called at any time. No action lock required
7674 struct ipw2100_priv *priv = ieee80211_priv(dev);
7675 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7676 wrqu->frag.fixed = 0; /* no auto select */
7677 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7679 IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
7684 static int ipw2100_wx_set_retry(struct net_device *dev,
7685 struct iw_request_info *info,
7686 union iwreq_data *wrqu, char *extra)
7688 struct ipw2100_priv *priv = ieee80211_priv(dev);
7691 if (wrqu->retry.flags & IW_RETRY_LIFETIME ||
7692 wrqu->retry.disabled)
7695 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7698 down(&priv->action_sem);
7699 if (!(priv->status & STATUS_INITIALIZED)) {
7704 if (wrqu->retry.flags & IW_RETRY_MIN) {
7705 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7706 IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
7711 if (wrqu->retry.flags & IW_RETRY_MAX) {
7712 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7713 IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
7718 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7720 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7722 IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
7725 up(&priv->action_sem);
7729 static int ipw2100_wx_get_retry(struct net_device *dev,
7730 struct iw_request_info *info,
7731 union iwreq_data *wrqu, char *extra)
7734 * This can be called at any time. No action lock required
7737 struct ipw2100_priv *priv = ieee80211_priv(dev);
7739 wrqu->retry.disabled = 0; /* can't be disabled */
7741 if ((wrqu->retry.flags & IW_RETRY_TYPE) ==
7745 if (wrqu->retry.flags & IW_RETRY_MAX) {
7746 wrqu->retry.flags = IW_RETRY_LIMIT & IW_RETRY_MAX;
7747 wrqu->retry.value = priv->long_retry_limit;
7750 (priv->short_retry_limit !=
7751 priv->long_retry_limit) ?
7752 IW_RETRY_LIMIT & IW_RETRY_MIN : IW_RETRY_LIMIT;
7754 wrqu->retry.value = priv->short_retry_limit;
7757 IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
7762 static int ipw2100_wx_set_scan(struct net_device *dev,
7763 struct iw_request_info *info,
7764 union iwreq_data *wrqu, char *extra)
7766 struct ipw2100_priv *priv = ieee80211_priv(dev);
7769 down(&priv->action_sem);
7770 if (!(priv->status & STATUS_INITIALIZED)) {
7775 IPW_DEBUG_WX("Initiating scan...\n");
7776 if (ipw2100_set_scan_options(priv) ||
7777 ipw2100_start_scan(priv)) {
7778 IPW_DEBUG_WX("Start scan failed.\n");
7780 /* TODO: Mark a scan as pending so when hardware initialized
7785 up(&priv->action_sem);
7789 static int ipw2100_wx_get_scan(struct net_device *dev,
7790 struct iw_request_info *info,
7791 union iwreq_data *wrqu, char *extra)
7794 * This can be called at any time. No action lock required
7797 struct ipw2100_priv *priv = ieee80211_priv(dev);
7798 return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
7803 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7805 static int ipw2100_wx_set_encode(struct net_device *dev,
7806 struct iw_request_info *info,
7807 union iwreq_data *wrqu, char *key)
7810 * No check of STATUS_INITIALIZED required
7813 struct ipw2100_priv *priv = ieee80211_priv(dev);
7814 return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
7817 static int ipw2100_wx_get_encode(struct net_device *dev,
7818 struct iw_request_info *info,
7819 union iwreq_data *wrqu, char *key)
7822 * This can be called at any time. No action lock required
7825 struct ipw2100_priv *priv = ieee80211_priv(dev);
7826 return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
7829 static int ipw2100_wx_set_power(struct net_device *dev,
7830 struct iw_request_info *info,
7831 union iwreq_data *wrqu, char *extra)
7833 struct ipw2100_priv *priv = ieee80211_priv(dev);
7836 down(&priv->action_sem);
7837 if (!(priv->status & STATUS_INITIALIZED)) {
7842 if (wrqu->power.disabled) {
7843 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7844 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7845 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7849 switch (wrqu->power.flags & IW_POWER_MODE) {
7850 case IW_POWER_ON: /* If not specified */
7851 case IW_POWER_MODE: /* If set all mask */
7852 case IW_POWER_ALL_R: /* If explicitely state all */
7854 default: /* Otherwise we don't support it */
7855 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7861 /* If the user hasn't specified a power management mode yet, default
7863 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7864 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7866 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n",
7870 up(&priv->action_sem);
7875 static int ipw2100_wx_get_power(struct net_device *dev,
7876 struct iw_request_info *info,
7877 union iwreq_data *wrqu, char *extra)
7880 * This can be called at any time. No action lock required
7883 struct ipw2100_priv *priv = ieee80211_priv(dev);
7885 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7886 wrqu->power.disabled = 1;
7888 wrqu->power.disabled = 0;
7889 wrqu->power.flags = 0;
7892 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7903 #ifdef CONFIG_IPW2100_MONITOR
7904 static int ipw2100_wx_set_promisc(struct net_device *dev,
7905 struct iw_request_info *info,
7906 union iwreq_data *wrqu, char *extra)
7908 struct ipw2100_priv *priv = ieee80211_priv(dev);
7909 int *parms = (int *)extra;
7910 int enable = (parms[0] > 0);
7913 down(&priv->action_sem);
7914 if (!(priv->status & STATUS_INITIALIZED)) {
7920 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
7921 err = ipw2100_set_channel(priv, parms[1], 0);
7924 priv->channel = parms[1];
7925 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7927 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
7928 err = ipw2100_switch_mode(priv, priv->last_mode);
7931 up(&priv->action_sem);
7935 static int ipw2100_wx_reset(struct net_device *dev,
7936 struct iw_request_info *info,
7937 union iwreq_data *wrqu, char *extra)
7939 struct ipw2100_priv *priv = ieee80211_priv(dev);
7940 if (priv->status & STATUS_INITIALIZED)
7941 schedule_reset(priv);
7947 static int ipw2100_wx_set_powermode(struct net_device *dev,
7948 struct iw_request_info *info,
7949 union iwreq_data *wrqu, char *extra)
7951 struct ipw2100_priv *priv = ieee80211_priv(dev);
7952 int err = 0, mode = *(int *)extra;
7954 down(&priv->action_sem);
7955 if (!(priv->status & STATUS_INITIALIZED)) {
7960 if ((mode < 1) || (mode > POWER_MODES))
7961 mode = IPW_POWER_AUTO;
7963 if (priv->power_mode != mode)
7964 err = ipw2100_set_power_mode(priv, mode);
7966 up(&priv->action_sem);
7970 #define MAX_POWER_STRING 80
7971 static int ipw2100_wx_get_powermode(struct net_device *dev,
7972 struct iw_request_info *info,
7973 union iwreq_data *wrqu, char *extra)
7976 * This can be called at any time. No action lock required
7979 struct ipw2100_priv *priv = ieee80211_priv(dev);
7980 int level = IPW_POWER_LEVEL(priv->power_mode);
7981 s32 timeout, period;
7983 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
7984 snprintf(extra, MAX_POWER_STRING,
7985 "Power save level: %d (Off)", level);
7988 case IPW_POWER_MODE_CAM:
7989 snprintf(extra, MAX_POWER_STRING,
7990 "Power save level: %d (None)", level);
7992 case IPW_POWER_AUTO:
7993 snprintf(extra, MAX_POWER_STRING,
7994 "Power save level: %d (Auto)", 0);
7997 timeout = timeout_duration[level - 1] / 1000;
7998 period = period_duration[level - 1] / 1000;
7999 snprintf(extra, MAX_POWER_STRING,
8000 "Power save level: %d "
8001 "(Timeout %dms, Period %dms)",
8002 level, timeout, period);
8006 wrqu->data.length = strlen(extra) + 1;
8012 static int ipw2100_wx_set_preamble(struct net_device *dev,
8013 struct iw_request_info *info,
8014 union iwreq_data *wrqu, char *extra)
8016 struct ipw2100_priv *priv = ieee80211_priv(dev);
8017 int err, mode = *(int *)extra;
8019 down(&priv->action_sem);
8020 if (!(priv->status & STATUS_INITIALIZED)) {
8026 priv->config |= CFG_LONG_PREAMBLE;
8028 priv->config &= ~CFG_LONG_PREAMBLE;
8034 err = ipw2100_system_config(priv, 0);
8037 up(&priv->action_sem);
8041 static int ipw2100_wx_get_preamble(struct net_device *dev,
8042 struct iw_request_info *info,
8043 union iwreq_data *wrqu, char *extra)
8046 * This can be called at any time. No action lock required
8049 struct ipw2100_priv *priv = ieee80211_priv(dev);
8051 if (priv->config & CFG_LONG_PREAMBLE)
8052 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
8054 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
8059 static iw_handler ipw2100_wx_handlers[] =
8061 NULL, /* SIOCSIWCOMMIT */
8062 ipw2100_wx_get_name, /* SIOCGIWNAME */
8063 NULL, /* SIOCSIWNWID */
8064 NULL, /* SIOCGIWNWID */
8065 ipw2100_wx_set_freq, /* SIOCSIWFREQ */
8066 ipw2100_wx_get_freq, /* SIOCGIWFREQ */
8067 ipw2100_wx_set_mode, /* SIOCSIWMODE */
8068 ipw2100_wx_get_mode, /* SIOCGIWMODE */
8069 NULL, /* SIOCSIWSENS */
8070 NULL, /* SIOCGIWSENS */
8071 NULL, /* SIOCSIWRANGE */
8072 ipw2100_wx_get_range, /* SIOCGIWRANGE */
8073 NULL, /* SIOCSIWPRIV */
8074 NULL, /* SIOCGIWPRIV */
8075 NULL, /* SIOCSIWSTATS */
8076 NULL, /* SIOCGIWSTATS */
8077 NULL, /* SIOCSIWSPY */
8078 NULL, /* SIOCGIWSPY */
8079 NULL, /* SIOCGIWTHRSPY */
8080 NULL, /* SIOCWIWTHRSPY */
8081 ipw2100_wx_set_wap, /* SIOCSIWAP */
8082 ipw2100_wx_get_wap, /* SIOCGIWAP */
8083 NULL, /* -- hole -- */
8084 NULL, /* SIOCGIWAPLIST -- deprecated */
8085 ipw2100_wx_set_scan, /* SIOCSIWSCAN */
8086 ipw2100_wx_get_scan, /* SIOCGIWSCAN */
8087 ipw2100_wx_set_essid, /* SIOCSIWESSID */
8088 ipw2100_wx_get_essid, /* SIOCGIWESSID */
8089 ipw2100_wx_set_nick, /* SIOCSIWNICKN */
8090 ipw2100_wx_get_nick, /* SIOCGIWNICKN */
8091 NULL, /* -- hole -- */
8092 NULL, /* -- hole -- */
8093 ipw2100_wx_set_rate, /* SIOCSIWRATE */
8094 ipw2100_wx_get_rate, /* SIOCGIWRATE */
8095 ipw2100_wx_set_rts, /* SIOCSIWRTS */
8096 ipw2100_wx_get_rts, /* SIOCGIWRTS */
8097 ipw2100_wx_set_frag, /* SIOCSIWFRAG */
8098 ipw2100_wx_get_frag, /* SIOCGIWFRAG */
8099 ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
8100 ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
8101 ipw2100_wx_set_retry, /* SIOCSIWRETRY */
8102 ipw2100_wx_get_retry, /* SIOCGIWRETRY */
8103 ipw2100_wx_set_encode, /* SIOCSIWENCODE */
8104 ipw2100_wx_get_encode, /* SIOCGIWENCODE */
8105 ipw2100_wx_set_power, /* SIOCSIWPOWER */
8106 ipw2100_wx_get_power, /* SIOCGIWPOWER */
8109 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8110 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8111 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8112 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8113 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8114 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8116 static const struct iw_priv_args ipw2100_private_args[] = {
8118 #ifdef CONFIG_IPW2100_MONITOR
8120 IPW2100_PRIV_SET_MONITOR,
8121 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"
8125 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"
8127 #endif /* CONFIG_IPW2100_MONITOR */
8130 IPW2100_PRIV_SET_POWER,
8131 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"
8134 IPW2100_PRIV_GET_POWER,
8135 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING, "get_power"
8138 IPW2100_PRIV_SET_LONGPREAMBLE,
8139 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"
8142 IPW2100_PRIV_GET_LONGPREAMBLE,
8143 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"
8147 static iw_handler ipw2100_private_handler[] = {
8148 #ifdef CONFIG_IPW2100_MONITOR
8149 ipw2100_wx_set_promisc,
8151 #else /* CONFIG_IPW2100_MONITOR */
8154 #endif /* CONFIG_IPW2100_MONITOR */
8155 ipw2100_wx_set_powermode,
8156 ipw2100_wx_get_powermode,
8157 ipw2100_wx_set_preamble,
8158 ipw2100_wx_get_preamble,
8161 static struct iw_handler_def ipw2100_wx_handler_def =
8163 .standard = ipw2100_wx_handlers,
8164 .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
8165 .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
8166 .num_private_args = sizeof(ipw2100_private_args) /
8167 sizeof(struct iw_priv_args),
8168 .private = (iw_handler *)ipw2100_private_handler,
8169 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8173 * Get wireless statistics.
8174 * Called by /proc/net/wireless
8175 * Also called by SIOCGIWSTATS
8177 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device * dev)
8191 struct ipw2100_priv *priv = ieee80211_priv(dev);
8192 struct iw_statistics *wstats;
8193 u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
8194 u32 ord_len = sizeof(u32);
8197 return (struct iw_statistics *) NULL;
8199 wstats = &priv->wstats;
8201 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8202 * ipw2100_wx_wireless_stats seems to be called before fw is
8203 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8204 * and associated; if not associcated, the values are all meaningless
8205 * anyway, so set them all to NULL and INVALID */
8206 if (!(priv->status & STATUS_ASSOCIATED)) {
8207 wstats->miss.beacon = 0;
8208 wstats->discard.retries = 0;
8209 wstats->qual.qual = 0;
8210 wstats->qual.level = 0;
8211 wstats->qual.noise = 0;
8212 wstats->qual.updated = 7;
8213 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8214 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8218 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8219 &missed_beacons, &ord_len))
8220 goto fail_get_ordinal;
8222 /* If we don't have a connection the quality and level is 0*/
8223 if (!(priv->status & STATUS_ASSOCIATED)) {
8224 wstats->qual.qual = 0;
8225 wstats->qual.level = 0;
8227 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8229 goto fail_get_ordinal;
8230 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8232 rssi_qual = rssi * POOR / 10;
8234 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8236 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8238 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8241 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8244 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8245 &tx_retries, &ord_len))
8246 goto fail_get_ordinal;
8248 if (tx_retries > 75)
8249 tx_qual = (90 - tx_retries) * POOR / 15;
8250 else if (tx_retries > 70)
8251 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8252 else if (tx_retries > 65)
8253 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8254 else if (tx_retries > 50)
8255 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8258 tx_qual = (50 - tx_retries) *
8259 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8261 if (missed_beacons > 50)
8262 beacon_qual = (60 - missed_beacons) * POOR / 10;
8263 else if (missed_beacons > 40)
8264 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8266 else if (missed_beacons > 32)
8267 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8269 else if (missed_beacons > 20)
8270 beacon_qual = (32 - missed_beacons) *
8271 (VERY_GOOD - GOOD) / 20 + GOOD;
8273 beacon_qual = (20 - missed_beacons) *
8274 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8276 quality = min(beacon_qual, min(tx_qual, rssi_qual));
8278 #ifdef CONFIG_IPW_DEBUG
8279 if (beacon_qual == quality)
8280 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8281 else if (tx_qual == quality)
8282 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8283 else if (quality != 100)
8284 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8286 IPW_DEBUG_WX("Quality not clamped.\n");
8289 wstats->qual.qual = quality;
8290 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8293 wstats->qual.noise = 0;
8294 wstats->qual.updated = 7;
8295 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8297 /* FIXME: this is percent and not a # */
8298 wstats->miss.beacon = missed_beacons;
8300 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8301 &tx_failures, &ord_len))
8302 goto fail_get_ordinal;
8303 wstats->discard.retries = tx_failures;
8308 IPW_DEBUG_WX("failed querying ordinals.\n");
8310 return (struct iw_statistics *) NULL;
8313 static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
8315 union iwreq_data wrqu;
8318 if (priv->status & STATUS_STOPPING)
8321 down(&priv->action_sem);
8323 IPW_DEBUG_WX("enter\n");
8325 up(&priv->action_sem);
8327 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8329 /* Fetch BSSID from the hardware */
8330 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8331 priv->status & STATUS_RF_KILL_MASK ||
8332 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8333 &priv->bssid, &len)) {
8334 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8336 /* We now have the BSSID, so can finish setting to the full
8337 * associated state */
8338 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8339 memcpy(&priv->ieee->bssid, priv->bssid, ETH_ALEN);
8340 priv->status &= ~STATUS_ASSOCIATING;
8341 priv->status |= STATUS_ASSOCIATED;
8342 netif_carrier_on(priv->net_dev);
8343 if (netif_queue_stopped(priv->net_dev)) {
8344 IPW_DEBUG_INFO("Waking net queue.\n");
8345 netif_wake_queue(priv->net_dev);
8347 IPW_DEBUG_INFO("Starting net queue.\n");
8348 netif_start_queue(priv->net_dev);
8352 if (!(priv->status & STATUS_ASSOCIATED)) {
8353 IPW_DEBUG_WX("Configuring ESSID\n");
8354 down(&priv->action_sem);
8355 /* This is a disassociation event, so kick the firmware to
8356 * look for another AP */
8357 if (priv->config & CFG_STATIC_ESSID)
8358 ipw2100_set_essid(priv, priv->essid, priv->essid_len, 0);
8360 ipw2100_set_essid(priv, NULL, 0, 0);
8361 up(&priv->action_sem);
8364 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8367 #define IPW2100_FW_MAJOR_VERSION 1
8368 #define IPW2100_FW_MINOR_VERSION 3
8370 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8371 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8373 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8374 IPW2100_FW_MAJOR_VERSION)
8376 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8377 "." __stringify(IPW2100_FW_MINOR_VERSION)
8379 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8384 BINARY FIRMWARE HEADER FORMAT
8388 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8391 C fw_len firmware data
8392 12 + fw_len uc_len microcode data
8396 struct ipw2100_fw_header {
8399 unsigned int fw_size;
8400 unsigned int uc_size;
8401 } __attribute__ ((packed));
8405 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8407 struct ipw2100_fw_header *h =
8408 (struct ipw2100_fw_header *)fw->fw_entry->data;
8410 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8411 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8412 "(detected version id of %u). "
8413 "See Documentation/networking/README.ipw2100\n",
8418 fw->version = h->version;
8419 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8420 fw->fw.size = h->fw_size;
8421 fw->uc.data = fw->fw.data + h->fw_size;
8422 fw->uc.size = h->uc_size;
8428 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8429 struct ipw2100_fw *fw)
8434 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8435 priv->net_dev->name);
8437 switch (priv->ieee->iw_mode) {
8439 fw_name = IPW2100_FW_NAME("-i");
8441 #ifdef CONFIG_IPW2100_MONITOR
8442 case IW_MODE_MONITOR:
8443 fw_name = IPW2100_FW_NAME("-p");
8448 fw_name = IPW2100_FW_NAME("");
8452 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8455 printk(KERN_ERR DRV_NAME ": "
8456 "%s: Firmware '%s' not available or load failed.\n",
8457 priv->net_dev->name, fw_name);
8460 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8461 fw->fw_entry->size);
8463 ipw2100_mod_firmware_load(fw);
8468 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8469 struct ipw2100_fw *fw)
8473 release_firmware(fw->fw_entry);
8474 fw->fw_entry = NULL;
8478 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8481 char ver[MAX_FW_VERSION_LEN];
8482 u32 len = MAX_FW_VERSION_LEN;
8485 /* firmware version is an ascii string (max len of 14) */
8486 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM,
8492 for (i = 0; i < len; i++)
8498 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8502 u32 len = sizeof(ver);
8503 /* microcode version is a 32 bit integer */
8504 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION,
8507 return snprintf(buf, max, "%08X", ver);
8511 * On exit, the firmware will have been freed from the fw list
8513 static int ipw2100_fw_download(struct ipw2100_priv *priv,
8514 struct ipw2100_fw *fw)
8516 /* firmware is constructed of N contiguous entries, each entry is
8520 * 0 4 address to write to
8521 * 4 2 length of data run
8527 const unsigned char *firmware_data = fw->fw.data;
8528 unsigned int firmware_data_left = fw->fw.size;
8530 while (firmware_data_left > 0) {
8531 addr = *(u32 *)(firmware_data);
8533 firmware_data_left -= 4;
8535 len = *(u16 *)(firmware_data);
8537 firmware_data_left -= 2;
8540 printk(KERN_ERR DRV_NAME ": "
8541 "Invalid firmware run-length of %d bytes\n",
8546 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8547 firmware_data += len;
8548 firmware_data_left -= len;
8554 struct symbol_alive_response {
8563 u16 clock_settle_time; // 1us LSB
8564 u16 powerup_settle_time; // 1us LSB
8565 u16 hop_settle_time; // 1us LSB
8566 u8 date[3]; // month, day, year
8567 u8 time[2]; // hours, minutes
8571 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8572 struct ipw2100_fw *fw)
8574 struct net_device *dev = priv->net_dev;
8575 const unsigned char *microcode_data = fw->uc.data;
8576 unsigned int microcode_data_left = fw->uc.size;
8577 void __iomem *reg = (void __iomem *)dev->base_addr;
8579 struct symbol_alive_response response;
8583 /* Symbol control */
8584 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8586 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8590 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8592 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8595 /* EN_CS_ACCESS bit to reset control store pointer */
8596 write_nic_byte(dev, 0x210000, 0x40);
8598 write_nic_byte(dev, 0x210000, 0x0);
8600 write_nic_byte(dev, 0x210000, 0x40);
8603 /* copy microcode from buffer into Symbol */
8605 while (microcode_data_left > 0) {
8606 write_nic_byte(dev, 0x210010, *microcode_data++);
8607 write_nic_byte(dev, 0x210010, *microcode_data++);
8608 microcode_data_left -= 2;
8611 /* EN_CS_ACCESS bit to reset the control store pointer */
8612 write_nic_byte(dev, 0x210000, 0x0);
8615 /* Enable System (Reg 0)
8616 * first enable causes garbage in RX FIFO */
8617 write_nic_byte(dev, 0x210000, 0x0);
8619 write_nic_byte(dev, 0x210000, 0x80);
8622 /* Reset External Baseband Reg */
8623 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8625 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8628 /* HW Config (Reg 5) */
8629 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8631 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8634 /* Enable System (Reg 0)
8635 * second enable should be OK */
8636 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8638 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8640 /* check Symbol is enabled - upped this from 5 as it wasn't always
8641 * catching the update */
8642 for (i = 0; i < 10; i++) {
8645 /* check Dino is enabled bit */
8646 read_nic_byte(dev, 0x210000, &data);
8652 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8657 /* Get Symbol alive response */
8658 for (i = 0; i < 30; i++) {
8659 /* Read alive response structure */
8661 j < (sizeof(struct symbol_alive_response) >> 1);
8663 read_nic_word(dev, 0x210004,
8664 ((u16 *)&response) + j);
8666 if ((response.cmd_id == 1) &&
8667 (response.ucode_valid == 0x1))
8673 printk(KERN_ERR DRV_NAME ": %s: No response from Symbol - hw not alive\n",
8675 printk_buf(IPW_DL_ERROR, (u8*)&response, sizeof(response));