1 /******************************************************************************
3 Copyright(c) 2003 - 2005 Intel Corporation. All rights reserved.
5 This program is free software; you can redistribute it and/or modify it
6 under the terms of version 2 of the GNU General Public License as
7 published by the Free Software Foundation.
9 This program is distributed in the hope that it will be useful, but WITHOUT
10 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 You should have received a copy of the GNU General Public License along with
15 this program; if not, write to the Free Software Foundation, Inc., 59
16 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
18 The full GNU General Public License is included in this distribution in the
22 James P. Ketrenos <ipw2100-admin@linux.intel.com>
23 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 Portions of this file are based on the sample_* files provided by Wireless
26 Extensions 0.26 package and copyright (c) 1997-2003 Jean Tourrilhes
29 Portions of this file are based on the Host AP project,
30 Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
32 Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
34 Portions of ipw2100_mod_firmware_load, ipw2100_do_mod_firmware_load, and
35 ipw2100_fw_load are loosely based on drivers/sound/sound_firmware.c
36 available in the 2.4.25 kernel sources, and are copyright (c) Alan Cox
38 ******************************************************************************/
41 Initial driver on which this is based was developed by Janusz Gorycki,
42 Maciej Urbaniak, and Maciej Sosnowski.
44 Promiscuous mode support added by Jacek Wysoczynski and Maciej Urbaniak.
48 Tx - Commands and Data
50 Firmware and host share a circular queue of Transmit Buffer Descriptors (TBDs)
51 Each TBD contains a pointer to the physical (dma_addr_t) address of data being
52 sent to the firmware as well as the length of the data.
54 The host writes to the TBD queue at the WRITE index. The WRITE index points
55 to the _next_ packet to be written and is advanced when after the TBD has been
58 The firmware pulls from the TBD queue at the READ index. The READ index points
59 to the currently being read entry, and is advanced once the firmware is
62 When data is sent to the firmware, the first TBD is used to indicate to the
63 firmware if a Command or Data is being sent. If it is Command, all of the
64 command information is contained within the physical address referred to by the
65 TBD. If it is Data, the first TBD indicates the type of data packet, number
66 of fragments, etc. The next TBD then referrs to the actual packet location.
68 The Tx flow cycle is as follows:
70 1) ipw2100_tx() is called by kernel with SKB to transmit
71 2) Packet is move from the tx_free_list and appended to the transmit pending
73 3) work is scheduled to move pending packets into the shared circular queue.
74 4) when placing packet in the circular queue, the incoming SKB is DMA mapped
75 to a physical address. That address is entered into a TBD. Two TBDs are
76 filled out. The first indicating a data packet, the second referring to the
78 5) the packet is removed from tx_pend_list and placed on the end of the
79 firmware pending list (fw_pend_list)
80 6) firmware is notified that the WRITE index has
81 7) Once the firmware has processed the TBD, INTA is triggered.
82 8) For each Tx interrupt received from the firmware, the READ index is checked
83 to see which TBDs are done being processed.
84 9) For each TBD that has been processed, the ISR pulls the oldest packet
85 from the fw_pend_list.
86 10)The packet structure contained in the fw_pend_list is then used
87 to unmap the DMA address and to free the SKB originally passed to the driver
89 11)The packet structure is placed onto the tx_free_list
91 The above steps are the same for commands, only the msg_free_list/msg_pend_list
92 are used instead of tx_free_list/tx_pend_list
96 Critical Sections / Locking :
98 There are two locks utilized. The first is the low level lock (priv->low_lock)
99 that protects the following:
101 - Access to the Tx/Rx queue lists via priv->low_lock. The lists are as follows:
103 tx_free_list : Holds pre-allocated Tx buffers.
104 TAIL modified in __ipw2100_tx_process()
105 HEAD modified in ipw2100_tx()
107 tx_pend_list : Holds used Tx buffers waiting to go into the TBD ring
108 TAIL modified ipw2100_tx()
109 HEAD modified by ipw2100_tx_send_data()
111 msg_free_list : Holds pre-allocated Msg (Command) buffers
112 TAIL modified in __ipw2100_tx_process()
113 HEAD modified in ipw2100_hw_send_command()
115 msg_pend_list : Holds used Msg buffers waiting to go into the TBD ring
116 TAIL modified in ipw2100_hw_send_command()
117 HEAD modified in ipw2100_tx_send_commands()
119 The flow of data on the TX side is as follows:
121 MSG_FREE_LIST + COMMAND => MSG_PEND_LIST => TBD => MSG_FREE_LIST
122 TX_FREE_LIST + DATA => TX_PEND_LIST => TBD => TX_FREE_LIST
124 The methods that work on the TBD ring are protected via priv->low_lock.
126 - The internal data state of the device itself
127 - Access to the firmware read/write indexes for the BD queues
130 All external entry functions are locked with the priv->action_lock to ensure
131 that only one external action is invoked at a time.
136 #include <linux/compiler.h>
137 #include <linux/config.h>
138 #include <linux/errno.h>
139 #include <linux/if_arp.h>
140 #include <linux/in6.h>
141 #include <linux/in.h>
142 #include <linux/ip.h>
143 #include <linux/kernel.h>
144 #include <linux/kmod.h>
145 #include <linux/module.h>
146 #include <linux/netdevice.h>
147 #include <linux/ethtool.h>
148 #include <linux/pci.h>
149 #include <linux/dma-mapping.h>
150 #include <linux/proc_fs.h>
151 #include <linux/skbuff.h>
152 #include <asm/uaccess.h>
154 #define __KERNEL_SYSCALLS__
155 #include <linux/fs.h>
156 #include <linux/mm.h>
157 #include <linux/slab.h>
158 #include <linux/unistd.h>
159 #include <linux/stringify.h>
160 #include <linux/tcp.h>
161 #include <linux/types.h>
162 #include <linux/version.h>
163 #include <linux/time.h>
164 #include <linux/firmware.h>
165 #include <linux/acpi.h>
166 #include <linux/ctype.h>
170 #define IPW2100_VERSION "1.1.1"
172 #define DRV_NAME "ipw2100"
173 #define DRV_VERSION IPW2100_VERSION
174 #define DRV_DESCRIPTION "Intel(R) PRO/Wireless 2100 Network Driver"
175 #define DRV_COPYRIGHT "Copyright(c) 2003-2005 Intel Corporation"
177 /* Debugging stuff */
178 #ifdef CONFIG_IPW_DEBUG
179 #define CONFIG_IPW2100_RX_DEBUG /* Reception debugging */
182 MODULE_DESCRIPTION(DRV_DESCRIPTION);
183 MODULE_VERSION(DRV_VERSION);
184 MODULE_AUTHOR(DRV_COPYRIGHT);
185 MODULE_LICENSE("GPL");
187 static int debug = 0;
189 static int channel = 0;
190 static int associate = 1;
191 static int disable = 0;
193 static struct ipw2100_fw ipw2100_firmware;
196 #include <linux/moduleparam.h>
197 module_param(debug, int, 0444);
198 module_param(mode, int, 0444);
199 module_param(channel, int, 0444);
200 module_param(associate, int, 0444);
201 module_param(disable, int, 0444);
203 MODULE_PARM_DESC(debug, "debug level");
204 MODULE_PARM_DESC(mode, "network mode (0=BSS,1=IBSS,2=Monitor)");
205 MODULE_PARM_DESC(channel, "channel");
206 MODULE_PARM_DESC(associate, "auto associate when scanning (default on)");
207 MODULE_PARM_DESC(disable, "manually disable the radio (default 0 [radio on])");
209 static u32 ipw2100_debug_level = IPW_DL_NONE;
211 #ifdef CONFIG_IPW_DEBUG
212 #define IPW_DEBUG(level, message...) \
214 if (ipw2100_debug_level & (level)) { \
215 printk(KERN_DEBUG "ipw2100: %c %s ", \
216 in_interrupt() ? 'I' : 'U', __FUNCTION__); \
221 #define IPW_DEBUG(level, message...) do {} while (0)
222 #endif /* CONFIG_IPW_DEBUG */
224 #ifdef CONFIG_IPW_DEBUG
225 static const char *command_types[] = {
227 "unused", /* HOST_ATTENTION */
229 "unused", /* SLEEP */
230 "unused", /* HOST_POWER_DOWN */
233 "unused", /* SET_IMR */
236 "AUTHENTICATION_TYPE",
239 "INTERNATIONAL_MODE",
254 "CLEAR_ALL_MULTICAST",
275 "AP_OR_STATION_TABLE",
279 "unused", /* SAVE_CALIBRATION */
280 "unused", /* RESTORE_CALIBRATION */
284 "HOST_PRE_POWER_DOWN",
285 "unused", /* HOST_INTERRUPT_COALESCING */
287 "CARD_DISABLE_PHY_OFF",
288 "MSDU_TX_RATES" "undefined",
290 "SET_STATION_STAT_BITS",
291 "CLEAR_STATIONS_STAT_BITS",
293 "SET_SECURITY_INFORMATION",
294 "DISASSOCIATION_BSSID",
299 /* Pre-decl until we get the code solid and then we can clean it up */
300 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv);
301 static void ipw2100_tx_send_data(struct ipw2100_priv *priv);
302 static int ipw2100_adapter_setup(struct ipw2100_priv *priv);
304 static void ipw2100_queues_initialize(struct ipw2100_priv *priv);
305 static void ipw2100_queues_free(struct ipw2100_priv *priv);
306 static int ipw2100_queues_allocate(struct ipw2100_priv *priv);
308 static int ipw2100_fw_download(struct ipw2100_priv *priv,
309 struct ipw2100_fw *fw);
310 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
311 struct ipw2100_fw *fw);
312 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
314 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
316 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
317 struct ipw2100_fw *fw);
318 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
319 struct ipw2100_fw *fw);
320 static void ipw2100_wx_event_work(struct ipw2100_priv *priv);
321 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev);
322 static struct iw_handler_def ipw2100_wx_handler_def;
324 static inline void read_register(struct net_device *dev, u32 reg, u32 * val)
326 *val = readl((void __iomem *)(dev->base_addr + reg));
327 IPW_DEBUG_IO("r: 0x%08X => 0x%08X\n", reg, *val);
330 static inline void write_register(struct net_device *dev, u32 reg, u32 val)
332 writel(val, (void __iomem *)(dev->base_addr + reg));
333 IPW_DEBUG_IO("w: 0x%08X <= 0x%08X\n", reg, val);
336 static inline void read_register_word(struct net_device *dev, u32 reg,
339 *val = readw((void __iomem *)(dev->base_addr + reg));
340 IPW_DEBUG_IO("r: 0x%08X => %04X\n", reg, *val);
343 static inline void read_register_byte(struct net_device *dev, u32 reg, u8 * val)
345 *val = readb((void __iomem *)(dev->base_addr + reg));
346 IPW_DEBUG_IO("r: 0x%08X => %02X\n", reg, *val);
349 static inline void write_register_word(struct net_device *dev, u32 reg, u16 val)
351 writew(val, (void __iomem *)(dev->base_addr + reg));
352 IPW_DEBUG_IO("w: 0x%08X <= %04X\n", reg, val);
355 static inline void write_register_byte(struct net_device *dev, u32 reg, u8 val)
357 writeb(val, (void __iomem *)(dev->base_addr + reg));
358 IPW_DEBUG_IO("w: 0x%08X =< %02X\n", reg, val);
361 static inline void read_nic_dword(struct net_device *dev, u32 addr, u32 * val)
363 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
364 addr & IPW_REG_INDIRECT_ADDR_MASK);
365 read_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
368 static inline void write_nic_dword(struct net_device *dev, u32 addr, u32 val)
370 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
371 addr & IPW_REG_INDIRECT_ADDR_MASK);
372 write_register(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
375 static inline void read_nic_word(struct net_device *dev, u32 addr, u16 * val)
377 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
378 addr & IPW_REG_INDIRECT_ADDR_MASK);
379 read_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
382 static inline void write_nic_word(struct net_device *dev, u32 addr, u16 val)
384 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
385 addr & IPW_REG_INDIRECT_ADDR_MASK);
386 write_register_word(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
389 static inline void read_nic_byte(struct net_device *dev, u32 addr, u8 * val)
391 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
392 addr & IPW_REG_INDIRECT_ADDR_MASK);
393 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
396 static inline void write_nic_byte(struct net_device *dev, u32 addr, u8 val)
398 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
399 addr & IPW_REG_INDIRECT_ADDR_MASK);
400 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA, val);
403 static inline void write_nic_auto_inc_address(struct net_device *dev, u32 addr)
405 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS,
406 addr & IPW_REG_INDIRECT_ADDR_MASK);
409 static inline void write_nic_dword_auto_inc(struct net_device *dev, u32 val)
411 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, val);
414 static inline void write_nic_memory(struct net_device *dev, u32 addr, u32 len,
422 /* read first nibble byte by byte */
423 aligned_addr = addr & (~0x3);
424 dif_len = addr - aligned_addr;
426 /* Start reading at aligned_addr + dif_len */
427 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
429 for (i = dif_len; i < 4; i++, buf++)
430 write_register_byte(dev,
431 IPW_REG_INDIRECT_ACCESS_DATA + i,
438 /* read DWs through autoincrement registers */
439 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
440 aligned_len = len & (~0x3);
441 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
442 write_register(dev, IPW_REG_AUTOINCREMENT_DATA, *(u32 *) buf);
444 /* copy the last nibble */
445 dif_len = len - aligned_len;
446 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
447 for (i = 0; i < dif_len; i++, buf++)
448 write_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i,
452 static inline void read_nic_memory(struct net_device *dev, u32 addr, u32 len,
460 /* read first nibble byte by byte */
461 aligned_addr = addr & (~0x3);
462 dif_len = addr - aligned_addr;
464 /* Start reading at aligned_addr + dif_len */
465 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS,
467 for (i = dif_len; i < 4; i++, buf++)
468 read_register_byte(dev,
469 IPW_REG_INDIRECT_ACCESS_DATA + i,
476 /* read DWs through autoincrement registers */
477 write_register(dev, IPW_REG_AUTOINCREMENT_ADDRESS, aligned_addr);
478 aligned_len = len & (~0x3);
479 for (i = 0; i < aligned_len; i += 4, buf += 4, aligned_addr += 4)
480 read_register(dev, IPW_REG_AUTOINCREMENT_DATA, (u32 *) buf);
482 /* copy the last nibble */
483 dif_len = len - aligned_len;
484 write_register(dev, IPW_REG_INDIRECT_ACCESS_ADDRESS, aligned_addr);
485 for (i = 0; i < dif_len; i++, buf++)
486 read_register_byte(dev, IPW_REG_INDIRECT_ACCESS_DATA + i, buf);
489 static inline int ipw2100_hw_is_adapter_in_system(struct net_device *dev)
491 return (dev->base_addr &&
493 ((void __iomem *)(dev->base_addr +
494 IPW_REG_DOA_DEBUG_AREA_START))
495 == IPW_DATA_DOA_DEBUG_VALUE));
498 static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
499 void *val, u32 * len)
501 struct ipw2100_ordinals *ordinals = &priv->ordinals;
508 if (ordinals->table1_addr == 0) {
509 printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
510 "before they have been loaded.\n");
514 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
515 if (*len < IPW_ORD_TAB_1_ENTRY_SIZE) {
516 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
518 printk(KERN_WARNING DRV_NAME
519 ": ordinal buffer length too small, need %zd\n",
520 IPW_ORD_TAB_1_ENTRY_SIZE);
525 read_nic_dword(priv->net_dev,
526 ordinals->table1_addr + (ord << 2), &addr);
527 read_nic_dword(priv->net_dev, addr, val);
529 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
534 if (IS_ORDINAL_TABLE_TWO(ordinals, ord)) {
536 ord -= IPW_START_ORD_TAB_2;
538 /* get the address of statistic */
539 read_nic_dword(priv->net_dev,
540 ordinals->table2_addr + (ord << 3), &addr);
542 /* get the second DW of statistics ;
543 * two 16-bit words - first is length, second is count */
544 read_nic_dword(priv->net_dev,
545 ordinals->table2_addr + (ord << 3) + sizeof(u32),
548 /* get each entry length */
549 field_len = *((u16 *) & field_info);
551 /* get number of entries */
552 field_count = *(((u16 *) & field_info) + 1);
554 /* abort if no enought memory */
555 total_length = field_len * field_count;
556 if (total_length > *len) {
565 /* read the ordinal data from the SRAM */
566 read_nic_memory(priv->net_dev, addr, total_length, val);
571 printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
572 "in table 2\n", ord);
577 static int ipw2100_set_ordinal(struct ipw2100_priv *priv, u32 ord, u32 * val,
580 struct ipw2100_ordinals *ordinals = &priv->ordinals;
583 if (IS_ORDINAL_TABLE_ONE(ordinals, ord)) {
584 if (*len != IPW_ORD_TAB_1_ENTRY_SIZE) {
585 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
586 IPW_DEBUG_INFO("wrong size\n");
590 read_nic_dword(priv->net_dev,
591 ordinals->table1_addr + (ord << 2), &addr);
593 write_nic_dword(priv->net_dev, addr, *val);
595 *len = IPW_ORD_TAB_1_ENTRY_SIZE;
600 IPW_DEBUG_INFO("wrong table\n");
601 if (IS_ORDINAL_TABLE_TWO(ordinals, ord))
607 static char *snprint_line(char *buf, size_t count,
608 const u8 * data, u32 len, u32 ofs)
613 out = snprintf(buf, count, "%08X", ofs);
615 for (l = 0, i = 0; i < 2; i++) {
616 out += snprintf(buf + out, count - out, " ");
617 for (j = 0; j < 8 && l < len; j++, l++)
618 out += snprintf(buf + out, count - out, "%02X ",
621 out += snprintf(buf + out, count - out, " ");
624 out += snprintf(buf + out, count - out, " ");
625 for (l = 0, i = 0; i < 2; i++) {
626 out += snprintf(buf + out, count - out, " ");
627 for (j = 0; j < 8 && l < len; j++, l++) {
628 c = data[(i * 8 + j)];
629 if (!isascii(c) || !isprint(c))
632 out += snprintf(buf + out, count - out, "%c", c);
636 out += snprintf(buf + out, count - out, " ");
642 static void printk_buf(int level, const u8 * data, u32 len)
646 if (!(ipw2100_debug_level & level))
650 printk(KERN_DEBUG "%s\n",
651 snprint_line(line, sizeof(line), &data[ofs],
652 min(len, 16U), ofs));
654 len -= min(len, 16U);
658 #define MAX_RESET_BACKOFF 10
660 static inline void schedule_reset(struct ipw2100_priv *priv)
662 unsigned long now = get_seconds();
664 /* If we haven't received a reset request within the backoff period,
665 * then we can reset the backoff interval so this reset occurs
667 if (priv->reset_backoff &&
668 (now - priv->last_reset > priv->reset_backoff))
669 priv->reset_backoff = 0;
671 priv->last_reset = get_seconds();
673 if (!(priv->status & STATUS_RESET_PENDING)) {
674 IPW_DEBUG_INFO("%s: Scheduling firmware restart (%ds).\n",
675 priv->net_dev->name, priv->reset_backoff);
676 netif_carrier_off(priv->net_dev);
677 netif_stop_queue(priv->net_dev);
678 priv->status |= STATUS_RESET_PENDING;
679 if (priv->reset_backoff)
680 queue_delayed_work(priv->workqueue, &priv->reset_work,
681 priv->reset_backoff * HZ);
683 queue_work(priv->workqueue, &priv->reset_work);
685 if (priv->reset_backoff < MAX_RESET_BACKOFF)
686 priv->reset_backoff++;
688 wake_up_interruptible(&priv->wait_command_queue);
690 IPW_DEBUG_INFO("%s: Firmware restart already in progress.\n",
691 priv->net_dev->name);
695 #define HOST_COMPLETE_TIMEOUT (2 * HZ)
696 static int ipw2100_hw_send_command(struct ipw2100_priv *priv,
697 struct host_command *cmd)
699 struct list_head *element;
700 struct ipw2100_tx_packet *packet;
704 IPW_DEBUG_HC("Sending %s command (#%d), %d bytes\n",
705 command_types[cmd->host_command], cmd->host_command,
706 cmd->host_command_length);
707 printk_buf(IPW_DL_HC, (u8 *) cmd->host_command_parameters,
708 cmd->host_command_length);
710 spin_lock_irqsave(&priv->low_lock, flags);
712 if (priv->fatal_error) {
714 ("Attempt to send command while hardware in fatal error condition.\n");
719 if (!(priv->status & STATUS_RUNNING)) {
721 ("Attempt to send command while hardware is not running.\n");
726 if (priv->status & STATUS_CMD_ACTIVE) {
728 ("Attempt to send command while another command is pending.\n");
733 if (list_empty(&priv->msg_free_list)) {
734 IPW_DEBUG_INFO("no available msg buffers\n");
738 priv->status |= STATUS_CMD_ACTIVE;
739 priv->messages_sent++;
741 element = priv->msg_free_list.next;
743 packet = list_entry(element, struct ipw2100_tx_packet, list);
744 packet->jiffy_start = jiffies;
746 /* initialize the firmware command packet */
747 packet->info.c_struct.cmd->host_command_reg = cmd->host_command;
748 packet->info.c_struct.cmd->host_command_reg1 = cmd->host_command1;
749 packet->info.c_struct.cmd->host_command_len_reg =
750 cmd->host_command_length;
751 packet->info.c_struct.cmd->sequence = cmd->host_command_sequence;
753 memcpy(packet->info.c_struct.cmd->host_command_params_reg,
754 cmd->host_command_parameters,
755 sizeof(packet->info.c_struct.cmd->host_command_params_reg));
758 DEC_STAT(&priv->msg_free_stat);
760 list_add_tail(element, &priv->msg_pend_list);
761 INC_STAT(&priv->msg_pend_stat);
763 ipw2100_tx_send_commands(priv);
764 ipw2100_tx_send_data(priv);
766 spin_unlock_irqrestore(&priv->low_lock, flags);
769 * We must wait for this command to complete before another
770 * command can be sent... but if we wait more than 3 seconds
771 * then there is a problem.
775 wait_event_interruptible_timeout(priv->wait_command_queue,
777 status & STATUS_CMD_ACTIVE),
778 HOST_COMPLETE_TIMEOUT);
781 IPW_DEBUG_INFO("Command completion failed out after %dms.\n",
782 1000 * (HOST_COMPLETE_TIMEOUT / HZ));
783 priv->fatal_error = IPW2100_ERR_MSG_TIMEOUT;
784 priv->status &= ~STATUS_CMD_ACTIVE;
785 schedule_reset(priv);
789 if (priv->fatal_error) {
790 printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
791 priv->net_dev->name);
795 /* !!!!! HACK TEST !!!!!
796 * When lots of debug trace statements are enabled, the driver
797 * doesn't seem to have as many firmware restart cycles...
799 * As a test, we're sticking in a 1/100s delay here */
800 schedule_timeout_uninterruptible(msecs_to_jiffies(10));
805 spin_unlock_irqrestore(&priv->low_lock, flags);
811 * Verify the values and data access of the hardware
812 * No locks needed or used. No functions called.
814 static int ipw2100_verify(struct ipw2100_priv *priv)
819 u32 val1 = 0x76543210;
820 u32 val2 = 0xFEDCBA98;
822 /* Domain 0 check - all values should be DOA_DEBUG */
823 for (address = IPW_REG_DOA_DEBUG_AREA_START;
824 address < IPW_REG_DOA_DEBUG_AREA_END; address += sizeof(u32)) {
825 read_register(priv->net_dev, address, &data1);
826 if (data1 != IPW_DATA_DOA_DEBUG_VALUE)
830 /* Domain 1 check - use arbitrary read/write compare */
831 for (address = 0; address < 5; address++) {
832 /* The memory area is not used now */
833 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
835 write_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
837 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x32,
839 read_register(priv->net_dev, IPW_REG_DOMAIN_1_OFFSET + 0x36,
841 if (val1 == data1 && val2 == data2)
850 * Loop until the CARD_DISABLED bit is the same value as the
853 * TODO: See if it would be more efficient to do a wait/wake
854 * cycle and have the completion event trigger the wakeup
857 #define IPW_CARD_DISABLE_COMPLETE_WAIT 100 // 100 milli
858 static int ipw2100_wait_for_card_state(struct ipw2100_priv *priv, int state)
862 u32 len = sizeof(card_state);
865 for (i = 0; i <= IPW_CARD_DISABLE_COMPLETE_WAIT * 1000; i += 50) {
866 err = ipw2100_get_ordinal(priv, IPW_ORD_CARD_DISABLED,
869 IPW_DEBUG_INFO("Query of CARD_DISABLED ordinal "
874 /* We'll break out if either the HW state says it is
875 * in the state we want, or if HOST_COMPLETE command
877 if ((card_state == state) ||
878 ((priv->status & STATUS_ENABLED) ?
879 IPW_HW_STATE_ENABLED : IPW_HW_STATE_DISABLED) == state) {
880 if (state == IPW_HW_STATE_ENABLED)
881 priv->status |= STATUS_ENABLED;
883 priv->status &= ~STATUS_ENABLED;
891 IPW_DEBUG_INFO("ipw2100_wait_for_card_state to %s state timed out\n",
892 state ? "DISABLED" : "ENABLED");
896 /*********************************************************************
897 Procedure : sw_reset_and_clock
898 Purpose : Asserts s/w reset, asserts clock initialization
899 and waits for clock stabilization
900 ********************************************************************/
901 static int sw_reset_and_clock(struct ipw2100_priv *priv)
907 write_register(priv->net_dev, IPW_REG_RESET_REG,
908 IPW_AUX_HOST_RESET_REG_SW_RESET);
910 // wait for clock stabilization
911 for (i = 0; i < 1000; i++) {
912 udelay(IPW_WAIT_RESET_ARC_COMPLETE_DELAY);
914 // check clock ready bit
915 read_register(priv->net_dev, IPW_REG_RESET_REG, &r);
916 if (r & IPW_AUX_HOST_RESET_REG_PRINCETON_RESET)
921 return -EIO; // TODO: better error value
923 /* set "initialization complete" bit to move adapter to
925 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
926 IPW_AUX_HOST_GP_CNTRL_BIT_INIT_DONE);
928 /* wait for clock stabilization */
929 for (i = 0; i < 10000; i++) {
930 udelay(IPW_WAIT_CLOCK_STABILIZATION_DELAY * 4);
932 /* check clock ready bit */
933 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
934 if (r & IPW_AUX_HOST_GP_CNTRL_BIT_CLOCK_READY)
939 return -EIO; /* TODO: better error value */
941 /* set D0 standby bit */
942 read_register(priv->net_dev, IPW_REG_GP_CNTRL, &r);
943 write_register(priv->net_dev, IPW_REG_GP_CNTRL,
944 r | IPW_AUX_HOST_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY);
949 /*********************************************************************
950 Procedure : ipw2100_download_firmware
951 Purpose : Initiaze adapter after power on.
953 1. assert s/w reset first!
954 2. awake clocks & wait for clock stabilization
955 3. hold ARC (don't ask me why...)
956 4. load Dino ucode and reset/clock init again
957 5. zero-out shared mem
959 *******************************************************************/
960 static int ipw2100_download_firmware(struct ipw2100_priv *priv)
966 /* Fetch the firmware and microcode */
967 struct ipw2100_fw ipw2100_firmware;
970 if (priv->fatal_error) {
971 IPW_DEBUG_ERROR("%s: ipw2100_download_firmware called after "
972 "fatal error %d. Interface must be brought down.\n",
973 priv->net_dev->name, priv->fatal_error);
977 if (!ipw2100_firmware.version) {
978 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
980 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
981 priv->net_dev->name, err);
982 priv->fatal_error = IPW2100_ERR_FW_LOAD;
987 err = ipw2100_get_firmware(priv, &ipw2100_firmware);
989 IPW_DEBUG_ERROR("%s: ipw2100_get_firmware failed: %d\n",
990 priv->net_dev->name, err);
991 priv->fatal_error = IPW2100_ERR_FW_LOAD;
995 priv->firmware_version = ipw2100_firmware.version;
997 /* s/w reset and clock stabilization */
998 err = sw_reset_and_clock(priv);
1000 IPW_DEBUG_ERROR("%s: sw_reset_and_clock failed: %d\n",
1001 priv->net_dev->name, err);
1005 err = ipw2100_verify(priv);
1007 IPW_DEBUG_ERROR("%s: ipw2100_verify failed: %d\n",
1008 priv->net_dev->name, err);
1013 write_nic_dword(priv->net_dev,
1014 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x80000000);
1016 /* allow ARC to run */
1017 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1019 /* load microcode */
1020 err = ipw2100_ucode_download(priv, &ipw2100_firmware);
1022 printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
1023 priv->net_dev->name, err);
1028 write_nic_dword(priv->net_dev,
1029 IPW_INTERNAL_REGISTER_HALT_AND_RESET, 0x00000000);
1031 /* s/w reset and clock stabilization (again!!!) */
1032 err = sw_reset_and_clock(priv);
1034 printk(KERN_ERR DRV_NAME
1035 ": %s: sw_reset_and_clock failed: %d\n",
1036 priv->net_dev->name, err);
1041 err = ipw2100_fw_download(priv, &ipw2100_firmware);
1043 IPW_DEBUG_ERROR("%s: Error loading firmware: %d\n",
1044 priv->net_dev->name, err);
1049 * When the .resume method of the driver is called, the other
1050 * part of the system, i.e. the ide driver could still stay in
1051 * the suspend stage. This prevents us from loading the firmware
1052 * from the disk. --YZ
1055 /* free any storage allocated for firmware image */
1056 ipw2100_release_firmware(priv, &ipw2100_firmware);
1059 /* zero out Domain 1 area indirectly (Si requirement) */
1060 for (address = IPW_HOST_FW_SHARED_AREA0;
1061 address < IPW_HOST_FW_SHARED_AREA0_END; address += 4)
1062 write_nic_dword(priv->net_dev, address, 0);
1063 for (address = IPW_HOST_FW_SHARED_AREA1;
1064 address < IPW_HOST_FW_SHARED_AREA1_END; address += 4)
1065 write_nic_dword(priv->net_dev, address, 0);
1066 for (address = IPW_HOST_FW_SHARED_AREA2;
1067 address < IPW_HOST_FW_SHARED_AREA2_END; address += 4)
1068 write_nic_dword(priv->net_dev, address, 0);
1069 for (address = IPW_HOST_FW_SHARED_AREA3;
1070 address < IPW_HOST_FW_SHARED_AREA3_END; address += 4)
1071 write_nic_dword(priv->net_dev, address, 0);
1072 for (address = IPW_HOST_FW_INTERRUPT_AREA;
1073 address < IPW_HOST_FW_INTERRUPT_AREA_END; address += 4)
1074 write_nic_dword(priv->net_dev, address, 0);
1079 ipw2100_release_firmware(priv, &ipw2100_firmware);
1083 static inline void ipw2100_enable_interrupts(struct ipw2100_priv *priv)
1085 if (priv->status & STATUS_INT_ENABLED)
1087 priv->status |= STATUS_INT_ENABLED;
1088 write_register(priv->net_dev, IPW_REG_INTA_MASK, IPW_INTERRUPT_MASK);
1091 static inline void ipw2100_disable_interrupts(struct ipw2100_priv *priv)
1093 if (!(priv->status & STATUS_INT_ENABLED))
1095 priv->status &= ~STATUS_INT_ENABLED;
1096 write_register(priv->net_dev, IPW_REG_INTA_MASK, 0x0);
1099 static void ipw2100_initialize_ordinals(struct ipw2100_priv *priv)
1101 struct ipw2100_ordinals *ord = &priv->ordinals;
1103 IPW_DEBUG_INFO("enter\n");
1105 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_1,
1108 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_ORDINALS_TABLE_2,
1111 read_nic_dword(priv->net_dev, ord->table1_addr, &ord->table1_size);
1112 read_nic_dword(priv->net_dev, ord->table2_addr, &ord->table2_size);
1114 ord->table2_size &= 0x0000FFFF;
1116 IPW_DEBUG_INFO("table 1 size: %d\n", ord->table1_size);
1117 IPW_DEBUG_INFO("table 2 size: %d\n", ord->table2_size);
1118 IPW_DEBUG_INFO("exit\n");
1121 static inline void ipw2100_hw_set_gpio(struct ipw2100_priv *priv)
1125 * Set GPIO 3 writable by FW; GPIO 1 writable
1126 * by driver and enable clock
1128 reg = (IPW_BIT_GPIO_GPIO3_MASK | IPW_BIT_GPIO_GPIO1_ENABLE |
1129 IPW_BIT_GPIO_LED_OFF);
1130 write_register(priv->net_dev, IPW_REG_GPIO, reg);
1133 static inline int rf_kill_active(struct ipw2100_priv *priv)
1135 #define MAX_RF_KILL_CHECKS 5
1136 #define RF_KILL_CHECK_DELAY 40
1138 unsigned short value = 0;
1142 if (!(priv->hw_features & HW_FEATURE_RFKILL)) {
1143 priv->status &= ~STATUS_RF_KILL_HW;
1147 for (i = 0; i < MAX_RF_KILL_CHECKS; i++) {
1148 udelay(RF_KILL_CHECK_DELAY);
1149 read_register(priv->net_dev, IPW_REG_GPIO, ®);
1150 value = (value << 1) | ((reg & IPW_BIT_GPIO_RF_KILL) ? 0 : 1);
1154 priv->status |= STATUS_RF_KILL_HW;
1156 priv->status &= ~STATUS_RF_KILL_HW;
1158 return (value == 0);
1161 static int ipw2100_get_hw_features(struct ipw2100_priv *priv)
1167 * EEPROM_SRAM_DB_START_ADDRESS using ordinal in ordinal table 1
1170 if (ipw2100_get_ordinal
1171 (priv, IPW_ORD_EEPROM_SRAM_DB_BLOCK_START_ADDRESS, &addr, &len)) {
1172 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1177 IPW_DEBUG_INFO("EEPROM address: %08X\n", addr);
1180 * EEPROM version is the byte at offset 0xfd in firmware
1181 * We read 4 bytes, then shift out the byte we actually want */
1182 read_nic_dword(priv->net_dev, addr + 0xFC, &val);
1183 priv->eeprom_version = (val >> 24) & 0xFF;
1184 IPW_DEBUG_INFO("EEPROM version: %d\n", priv->eeprom_version);
1187 * HW RF Kill enable is bit 0 in byte at offset 0x21 in firmware
1189 * notice that the EEPROM bit is reverse polarity, i.e.
1190 * bit = 0 signifies HW RF kill switch is supported
1191 * bit = 1 signifies HW RF kill switch is NOT supported
1193 read_nic_dword(priv->net_dev, addr + 0x20, &val);
1194 if (!((val >> 24) & 0x01))
1195 priv->hw_features |= HW_FEATURE_RFKILL;
1197 IPW_DEBUG_INFO("HW RF Kill: %ssupported.\n",
1198 (priv->hw_features & HW_FEATURE_RFKILL) ? "" : "not ");
1204 * Start firmware execution after power on and intialization
1207 * 2. Wait for f/w initialization completes;
1209 static int ipw2100_start_adapter(struct ipw2100_priv *priv)
1212 u32 inta, inta_mask, gpio;
1214 IPW_DEBUG_INFO("enter\n");
1216 if (priv->status & STATUS_RUNNING)
1220 * Initialize the hw - drive adapter to DO state by setting
1221 * init_done bit. Wait for clk_ready bit and Download
1224 if (ipw2100_download_firmware(priv)) {
1225 printk(KERN_ERR DRV_NAME
1226 ": %s: Failed to power on the adapter.\n",
1227 priv->net_dev->name);
1231 /* Clear the Tx, Rx and Msg queues and the r/w indexes
1232 * in the firmware RBD and TBD ring queue */
1233 ipw2100_queues_initialize(priv);
1235 ipw2100_hw_set_gpio(priv);
1237 /* TODO -- Look at disabling interrupts here to make sure none
1238 * get fired during FW initialization */
1240 /* Release ARC - clear reset bit */
1241 write_register(priv->net_dev, IPW_REG_RESET_REG, 0);
1243 /* wait for f/w intialization complete */
1244 IPW_DEBUG_FW("Waiting for f/w initialization to complete...\n");
1247 schedule_timeout_uninterruptible(msecs_to_jiffies(40));
1248 /* Todo... wait for sync command ... */
1250 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1252 /* check "init done" bit */
1253 if (inta & IPW2100_INTA_FW_INIT_DONE) {
1254 /* reset "init done" bit */
1255 write_register(priv->net_dev, IPW_REG_INTA,
1256 IPW2100_INTA_FW_INIT_DONE);
1260 /* check error conditions : we check these after the firmware
1261 * check so that if there is an error, the interrupt handler
1262 * will see it and the adapter will be reset */
1264 (IPW2100_INTA_FATAL_ERROR | IPW2100_INTA_PARITY_ERROR)) {
1265 /* clear error conditions */
1266 write_register(priv->net_dev, IPW_REG_INTA,
1267 IPW2100_INTA_FATAL_ERROR |
1268 IPW2100_INTA_PARITY_ERROR);
1272 /* Clear out any pending INTAs since we aren't supposed to have
1273 * interrupts enabled at this point... */
1274 read_register(priv->net_dev, IPW_REG_INTA, &inta);
1275 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
1276 inta &= IPW_INTERRUPT_MASK;
1277 /* Clear out any pending interrupts */
1278 if (inta & inta_mask)
1279 write_register(priv->net_dev, IPW_REG_INTA, inta);
1281 IPW_DEBUG_FW("f/w initialization complete: %s\n",
1282 i ? "SUCCESS" : "FAILED");
1285 printk(KERN_WARNING DRV_NAME
1286 ": %s: Firmware did not initialize.\n",
1287 priv->net_dev->name);
1291 /* allow firmware to write to GPIO1 & GPIO3 */
1292 read_register(priv->net_dev, IPW_REG_GPIO, &gpio);
1294 gpio |= (IPW_BIT_GPIO_GPIO1_MASK | IPW_BIT_GPIO_GPIO3_MASK);
1296 write_register(priv->net_dev, IPW_REG_GPIO, gpio);
1298 /* Ready to receive commands */
1299 priv->status |= STATUS_RUNNING;
1301 /* The adapter has been reset; we are not associated */
1302 priv->status &= ~(STATUS_ASSOCIATING | STATUS_ASSOCIATED);
1304 IPW_DEBUG_INFO("exit\n");
1309 static inline void ipw2100_reset_fatalerror(struct ipw2100_priv *priv)
1311 if (!priv->fatal_error)
1314 priv->fatal_errors[priv->fatal_index++] = priv->fatal_error;
1315 priv->fatal_index %= IPW2100_ERROR_QUEUE;
1316 priv->fatal_error = 0;
1319 /* NOTE: Our interrupt is disabled when this method is called */
1320 static int ipw2100_power_cycle_adapter(struct ipw2100_priv *priv)
1325 IPW_DEBUG_INFO("Power cycling the hardware.\n");
1327 ipw2100_hw_set_gpio(priv);
1329 /* Step 1. Stop Master Assert */
1330 write_register(priv->net_dev, IPW_REG_RESET_REG,
1331 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1333 /* Step 2. Wait for stop Master Assert
1334 * (not more then 50us, otherwise ret error */
1337 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
1338 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1340 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1344 priv->status &= ~STATUS_RESET_PENDING;
1348 ("exit - waited too long for master assert stop\n");
1352 write_register(priv->net_dev, IPW_REG_RESET_REG,
1353 IPW_AUX_HOST_RESET_REG_SW_RESET);
1355 /* Reset any fatal_error conditions */
1356 ipw2100_reset_fatalerror(priv);
1358 /* At this point, the adapter is now stopped and disabled */
1359 priv->status &= ~(STATUS_RUNNING | STATUS_ASSOCIATING |
1360 STATUS_ASSOCIATED | STATUS_ENABLED);
1366 * Send the CARD_DISABLE_PHY_OFF comamnd to the card to disable it
1368 * After disabling, if the card was associated, a STATUS_ASSN_LOST will be sent.
1370 * STATUS_CARD_DISABLE_NOTIFICATION will be sent regardless of
1371 * if STATUS_ASSN_LOST is sent.
1373 static int ipw2100_hw_phy_off(struct ipw2100_priv *priv)
1376 #define HW_PHY_OFF_LOOP_DELAY (HZ / 5000)
1378 struct host_command cmd = {
1379 .host_command = CARD_DISABLE_PHY_OFF,
1380 .host_command_sequence = 0,
1381 .host_command_length = 0,
1386 IPW_DEBUG_HC("CARD_DISABLE_PHY_OFF\n");
1388 /* Turn off the radio */
1389 err = ipw2100_hw_send_command(priv, &cmd);
1393 for (i = 0; i < 2500; i++) {
1394 read_nic_dword(priv->net_dev, IPW2100_CONTROL_REG, &val1);
1395 read_nic_dword(priv->net_dev, IPW2100_COMMAND, &val2);
1397 if ((val1 & IPW2100_CONTROL_PHY_OFF) &&
1398 (val2 & IPW2100_COMMAND_PHY_OFF))
1401 schedule_timeout_uninterruptible(HW_PHY_OFF_LOOP_DELAY);
1407 static int ipw2100_enable_adapter(struct ipw2100_priv *priv)
1409 struct host_command cmd = {
1410 .host_command = HOST_COMPLETE,
1411 .host_command_sequence = 0,
1412 .host_command_length = 0
1416 IPW_DEBUG_HC("HOST_COMPLETE\n");
1418 if (priv->status & STATUS_ENABLED)
1421 down(&priv->adapter_sem);
1423 if (rf_kill_active(priv)) {
1424 IPW_DEBUG_HC("Command aborted due to RF kill active.\n");
1428 err = ipw2100_hw_send_command(priv, &cmd);
1430 IPW_DEBUG_INFO("Failed to send HOST_COMPLETE command\n");
1434 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_ENABLED);
1436 IPW_DEBUG_INFO("%s: card not responding to init command.\n",
1437 priv->net_dev->name);
1441 if (priv->stop_hang_check) {
1442 priv->stop_hang_check = 0;
1443 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
1447 up(&priv->adapter_sem);
1451 static int ipw2100_hw_stop_adapter(struct ipw2100_priv *priv)
1453 #define HW_POWER_DOWN_DELAY (msecs_to_jiffies(100))
1455 struct host_command cmd = {
1456 .host_command = HOST_PRE_POWER_DOWN,
1457 .host_command_sequence = 0,
1458 .host_command_length = 0,
1463 if (!(priv->status & STATUS_RUNNING))
1466 priv->status |= STATUS_STOPPING;
1468 /* We can only shut down the card if the firmware is operational. So,
1469 * if we haven't reset since a fatal_error, then we can not send the
1470 * shutdown commands. */
1471 if (!priv->fatal_error) {
1472 /* First, make sure the adapter is enabled so that the PHY_OFF
1473 * command can shut it down */
1474 ipw2100_enable_adapter(priv);
1476 err = ipw2100_hw_phy_off(priv);
1478 printk(KERN_WARNING DRV_NAME
1479 ": Error disabling radio %d\n", err);
1482 * If in D0-standby mode going directly to D3 may cause a
1483 * PCI bus violation. Therefore we must change out of the D0
1486 * Sending the PREPARE_FOR_POWER_DOWN will restrict the
1487 * hardware from going into standby mode and will transition
1488 * out of D0-standy if it is already in that state.
1490 * STATUS_PREPARE_POWER_DOWN_COMPLETE will be sent by the
1491 * driver upon completion. Once received, the driver can
1492 * proceed to the D3 state.
1494 * Prepare for power down command to fw. This command would
1495 * take HW out of D0-standby and prepare it for D3 state.
1497 * Currently FW does not support event notification for this
1498 * event. Therefore, skip waiting for it. Just wait a fixed
1501 IPW_DEBUG_HC("HOST_PRE_POWER_DOWN\n");
1503 err = ipw2100_hw_send_command(priv, &cmd);
1505 printk(KERN_WARNING DRV_NAME ": "
1506 "%s: Power down command failed: Error %d\n",
1507 priv->net_dev->name, err);
1509 schedule_timeout_uninterruptible(HW_POWER_DOWN_DELAY);
1512 priv->status &= ~STATUS_ENABLED;
1515 * Set GPIO 3 writable by FW; GPIO 1 writable
1516 * by driver and enable clock
1518 ipw2100_hw_set_gpio(priv);
1521 * Power down adapter. Sequence:
1522 * 1. Stop master assert (RESET_REG[9]=1)
1523 * 2. Wait for stop master (RESET_REG[8]==1)
1524 * 3. S/w reset assert (RESET_REG[7] = 1)
1527 /* Stop master assert */
1528 write_register(priv->net_dev, IPW_REG_RESET_REG,
1529 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
1531 /* wait stop master not more than 50 usec.
1532 * Otherwise return error. */
1533 for (i = 5; i > 0; i--) {
1536 /* Check master stop bit */
1537 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
1539 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
1544 printk(KERN_WARNING DRV_NAME
1545 ": %s: Could now power down adapter.\n",
1546 priv->net_dev->name);
1548 /* assert s/w reset */
1549 write_register(priv->net_dev, IPW_REG_RESET_REG,
1550 IPW_AUX_HOST_RESET_REG_SW_RESET);
1552 priv->status &= ~(STATUS_RUNNING | STATUS_STOPPING);
1557 static int ipw2100_disable_adapter(struct ipw2100_priv *priv)
1559 struct host_command cmd = {
1560 .host_command = CARD_DISABLE,
1561 .host_command_sequence = 0,
1562 .host_command_length = 0
1566 IPW_DEBUG_HC("CARD_DISABLE\n");
1568 if (!(priv->status & STATUS_ENABLED))
1571 /* Make sure we clear the associated state */
1572 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1574 if (!priv->stop_hang_check) {
1575 priv->stop_hang_check = 1;
1576 cancel_delayed_work(&priv->hang_check);
1579 down(&priv->adapter_sem);
1581 err = ipw2100_hw_send_command(priv, &cmd);
1583 printk(KERN_WARNING DRV_NAME
1584 ": exit - failed to send CARD_DISABLE command\n");
1588 err = ipw2100_wait_for_card_state(priv, IPW_HW_STATE_DISABLED);
1590 printk(KERN_WARNING DRV_NAME
1591 ": exit - card failed to change to DISABLED\n");
1595 IPW_DEBUG_INFO("TODO: implement scan state machine\n");
1598 up(&priv->adapter_sem);
1602 static int ipw2100_set_scan_options(struct ipw2100_priv *priv)
1604 struct host_command cmd = {
1605 .host_command = SET_SCAN_OPTIONS,
1606 .host_command_sequence = 0,
1607 .host_command_length = 8
1611 IPW_DEBUG_INFO("enter\n");
1613 IPW_DEBUG_SCAN("setting scan options\n");
1615 cmd.host_command_parameters[0] = 0;
1617 if (!(priv->config & CFG_ASSOCIATE))
1618 cmd.host_command_parameters[0] |= IPW_SCAN_NOASSOCIATE;
1619 if ((priv->ieee->sec.flags & SEC_ENABLED) && priv->ieee->sec.enabled)
1620 cmd.host_command_parameters[0] |= IPW_SCAN_MIXED_CELL;
1621 if (priv->config & CFG_PASSIVE_SCAN)
1622 cmd.host_command_parameters[0] |= IPW_SCAN_PASSIVE;
1624 cmd.host_command_parameters[1] = priv->channel_mask;
1626 err = ipw2100_hw_send_command(priv, &cmd);
1628 IPW_DEBUG_HC("SET_SCAN_OPTIONS 0x%04X\n",
1629 cmd.host_command_parameters[0]);
1634 static int ipw2100_start_scan(struct ipw2100_priv *priv)
1636 struct host_command cmd = {
1637 .host_command = BROADCAST_SCAN,
1638 .host_command_sequence = 0,
1639 .host_command_length = 4
1643 IPW_DEBUG_HC("START_SCAN\n");
1645 cmd.host_command_parameters[0] = 0;
1647 /* No scanning if in monitor mode */
1648 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
1651 if (priv->status & STATUS_SCANNING) {
1652 IPW_DEBUG_SCAN("Scan requested while already in scan...\n");
1656 IPW_DEBUG_INFO("enter\n");
1658 /* Not clearing here; doing so makes iwlist always return nothing...
1660 * We should modify the table logic to use aging tables vs. clearing
1661 * the table on each scan start.
1663 IPW_DEBUG_SCAN("starting scan\n");
1665 priv->status |= STATUS_SCANNING;
1666 err = ipw2100_hw_send_command(priv, &cmd);
1668 priv->status &= ~STATUS_SCANNING;
1670 IPW_DEBUG_INFO("exit\n");
1675 static int ipw2100_up(struct ipw2100_priv *priv, int deferred)
1677 unsigned long flags;
1680 u32 ord_len = sizeof(lock);
1682 /* Quite if manually disabled. */
1683 if (priv->status & STATUS_RF_KILL_SW) {
1684 IPW_DEBUG_INFO("%s: Radio is disabled by Manual Disable "
1685 "switch\n", priv->net_dev->name);
1689 /* If the interrupt is enabled, turn it off... */
1690 spin_lock_irqsave(&priv->low_lock, flags);
1691 ipw2100_disable_interrupts(priv);
1693 /* Reset any fatal_error conditions */
1694 ipw2100_reset_fatalerror(priv);
1695 spin_unlock_irqrestore(&priv->low_lock, flags);
1697 if (priv->status & STATUS_POWERED ||
1698 (priv->status & STATUS_RESET_PENDING)) {
1699 /* Power cycle the card ... */
1700 if (ipw2100_power_cycle_adapter(priv)) {
1701 printk(KERN_WARNING DRV_NAME
1702 ": %s: Could not cycle adapter.\n",
1703 priv->net_dev->name);
1708 priv->status |= STATUS_POWERED;
1710 /* Load the firmware, start the clocks, etc. */
1711 if (ipw2100_start_adapter(priv)) {
1712 printk(KERN_ERR DRV_NAME
1713 ": %s: Failed to start the firmware.\n",
1714 priv->net_dev->name);
1719 ipw2100_initialize_ordinals(priv);
1721 /* Determine capabilities of this particular HW configuration */
1722 if (ipw2100_get_hw_features(priv)) {
1723 printk(KERN_ERR DRV_NAME
1724 ": %s: Failed to determine HW features.\n",
1725 priv->net_dev->name);
1731 if (ipw2100_set_ordinal(priv, IPW_ORD_PERS_DB_LOCK, &lock, &ord_len)) {
1732 printk(KERN_ERR DRV_NAME
1733 ": %s: Failed to clear ordinal lock.\n",
1734 priv->net_dev->name);
1739 priv->status &= ~STATUS_SCANNING;
1741 if (rf_kill_active(priv)) {
1742 printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
1743 priv->net_dev->name);
1745 if (priv->stop_rf_kill) {
1746 priv->stop_rf_kill = 0;
1747 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
1753 /* Turn on the interrupt so that commands can be processed */
1754 ipw2100_enable_interrupts(priv);
1756 /* Send all of the commands that must be sent prior to
1758 if (ipw2100_adapter_setup(priv)) {
1759 printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
1760 priv->net_dev->name);
1766 /* Enable the adapter - sends HOST_COMPLETE */
1767 if (ipw2100_enable_adapter(priv)) {
1768 printk(KERN_ERR DRV_NAME ": "
1769 "%s: failed in call to enable adapter.\n",
1770 priv->net_dev->name);
1771 ipw2100_hw_stop_adapter(priv);
1776 /* Start a scan . . . */
1777 ipw2100_set_scan_options(priv);
1778 ipw2100_start_scan(priv);
1785 /* Called by register_netdev() */
1786 static int ipw2100_net_init(struct net_device *dev)
1788 struct ipw2100_priv *priv = ieee80211_priv(dev);
1789 return ipw2100_up(priv, 1);
1792 static void ipw2100_down(struct ipw2100_priv *priv)
1794 unsigned long flags;
1795 union iwreq_data wrqu = {
1797 .sa_family = ARPHRD_ETHER}
1799 int associated = priv->status & STATUS_ASSOCIATED;
1801 /* Kill the RF switch timer */
1802 if (!priv->stop_rf_kill) {
1803 priv->stop_rf_kill = 1;
1804 cancel_delayed_work(&priv->rf_kill);
1807 /* Kill the firmare hang check timer */
1808 if (!priv->stop_hang_check) {
1809 priv->stop_hang_check = 1;
1810 cancel_delayed_work(&priv->hang_check);
1813 /* Kill any pending resets */
1814 if (priv->status & STATUS_RESET_PENDING)
1815 cancel_delayed_work(&priv->reset_work);
1817 /* Make sure the interrupt is on so that FW commands will be
1818 * processed correctly */
1819 spin_lock_irqsave(&priv->low_lock, flags);
1820 ipw2100_enable_interrupts(priv);
1821 spin_unlock_irqrestore(&priv->low_lock, flags);
1823 if (ipw2100_hw_stop_adapter(priv))
1824 printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
1825 priv->net_dev->name);
1827 /* Do not disable the interrupt until _after_ we disable
1828 * the adaptor. Otherwise the CARD_DISABLE command will never
1829 * be ack'd by the firmware */
1830 spin_lock_irqsave(&priv->low_lock, flags);
1831 ipw2100_disable_interrupts(priv);
1832 spin_unlock_irqrestore(&priv->low_lock, flags);
1834 #ifdef ACPI_CSTATE_LIMIT_DEFINED
1835 if (priv->config & CFG_C3_DISABLED) {
1836 IPW_DEBUG_INFO(": Resetting C3 transitions.\n");
1837 acpi_set_cstate_limit(priv->cstate_limit);
1838 priv->config &= ~CFG_C3_DISABLED;
1842 /* We have to signal any supplicant if we are disassociating */
1844 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1846 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1847 netif_carrier_off(priv->net_dev);
1848 netif_stop_queue(priv->net_dev);
1851 static void ipw2100_reset_adapter(struct ipw2100_priv *priv)
1853 unsigned long flags;
1854 union iwreq_data wrqu = {
1856 .sa_family = ARPHRD_ETHER}
1858 int associated = priv->status & STATUS_ASSOCIATED;
1860 spin_lock_irqsave(&priv->low_lock, flags);
1861 IPW_DEBUG_INFO(": %s: Restarting adapter.\n", priv->net_dev->name);
1863 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
1864 priv->status |= STATUS_SECURITY_UPDATED;
1866 /* Force a power cycle even if interface hasn't been opened
1868 cancel_delayed_work(&priv->reset_work);
1869 priv->status |= STATUS_RESET_PENDING;
1870 spin_unlock_irqrestore(&priv->low_lock, flags);
1872 down(&priv->action_sem);
1873 /* stop timed checks so that they don't interfere with reset */
1874 priv->stop_hang_check = 1;
1875 cancel_delayed_work(&priv->hang_check);
1877 /* We have to signal any supplicant if we are disassociating */
1879 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
1881 ipw2100_up(priv, 0);
1882 up(&priv->action_sem);
1886 static void isr_indicate_associated(struct ipw2100_priv *priv, u32 status)
1889 #define MAC_ASSOCIATION_READ_DELAY (HZ)
1890 int ret, len, essid_len;
1891 char essid[IW_ESSID_MAX_SIZE];
1898 * TBD: BSSID is usually 00:00:00:00:00:00 here and not
1899 * an actual MAC of the AP. Seems like FW sets this
1900 * address too late. Read it later and expose through
1901 * /proc or schedule a later task to query and update
1904 essid_len = IW_ESSID_MAX_SIZE;
1905 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID,
1908 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1914 ret = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &txrate, &len);
1916 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1922 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &len);
1924 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1929 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID, &bssid, &len);
1931 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
1935 memcpy(priv->ieee->bssid, bssid, ETH_ALEN);
1938 case TX_RATE_1_MBIT:
1939 txratename = "1Mbps";
1941 case TX_RATE_2_MBIT:
1942 txratename = "2Mbsp";
1944 case TX_RATE_5_5_MBIT:
1945 txratename = "5.5Mbps";
1947 case TX_RATE_11_MBIT:
1948 txratename = "11Mbps";
1951 IPW_DEBUG_INFO("Unknown rate: %d\n", txrate);
1952 txratename = "unknown rate";
1956 IPW_DEBUG_INFO("%s: Associated with '%s' at %s, channel %d (BSSID="
1958 priv->net_dev->name, escape_essid(essid, essid_len),
1959 txratename, chan, MAC_ARG(bssid));
1961 /* now we copy read ssid into dev */
1962 if (!(priv->config & CFG_STATIC_ESSID)) {
1963 priv->essid_len = min((u8) essid_len, (u8) IW_ESSID_MAX_SIZE);
1964 memcpy(priv->essid, essid, priv->essid_len);
1966 priv->channel = chan;
1967 memcpy(priv->bssid, bssid, ETH_ALEN);
1969 priv->status |= STATUS_ASSOCIATING;
1970 priv->connect_start = get_seconds();
1972 queue_delayed_work(priv->workqueue, &priv->wx_event_work, HZ / 10);
1975 static int ipw2100_set_essid(struct ipw2100_priv *priv, char *essid,
1976 int length, int batch_mode)
1978 int ssid_len = min(length, IW_ESSID_MAX_SIZE);
1979 struct host_command cmd = {
1980 .host_command = SSID,
1981 .host_command_sequence = 0,
1982 .host_command_length = ssid_len
1986 IPW_DEBUG_HC("SSID: '%s'\n", escape_essid(essid, ssid_len));
1989 memcpy(cmd.host_command_parameters, essid, ssid_len);
1992 err = ipw2100_disable_adapter(priv);
1997 /* Bug in FW currently doesn't honor bit 0 in SET_SCAN_OPTIONS to
1998 * disable auto association -- so we cheat by setting a bogus SSID */
1999 if (!ssid_len && !(priv->config & CFG_ASSOCIATE)) {
2001 u8 *bogus = (u8 *) cmd.host_command_parameters;
2002 for (i = 0; i < IW_ESSID_MAX_SIZE; i++)
2003 bogus[i] = 0x18 + i;
2004 cmd.host_command_length = IW_ESSID_MAX_SIZE;
2007 /* NOTE: We always send the SSID command even if the provided ESSID is
2008 * the same as what we currently think is set. */
2010 err = ipw2100_hw_send_command(priv, &cmd);
2012 memset(priv->essid + ssid_len, 0, IW_ESSID_MAX_SIZE - ssid_len);
2013 memcpy(priv->essid, essid, ssid_len);
2014 priv->essid_len = ssid_len;
2018 if (ipw2100_enable_adapter(priv))
2025 static void isr_indicate_association_lost(struct ipw2100_priv *priv, u32 status)
2027 IPW_DEBUG(IPW_DL_NOTIF | IPW_DL_STATE | IPW_DL_ASSOC,
2028 "disassociated: '%s' " MAC_FMT " \n",
2029 escape_essid(priv->essid, priv->essid_len),
2030 MAC_ARG(priv->bssid));
2032 priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
2034 if (priv->status & STATUS_STOPPING) {
2035 IPW_DEBUG_INFO("Card is stopping itself, discard ASSN_LOST.\n");
2039 memset(priv->bssid, 0, ETH_ALEN);
2040 memset(priv->ieee->bssid, 0, ETH_ALEN);
2042 netif_carrier_off(priv->net_dev);
2043 netif_stop_queue(priv->net_dev);
2045 if (!(priv->status & STATUS_RUNNING))
2048 if (priv->status & STATUS_SECURITY_UPDATED)
2049 queue_work(priv->workqueue, &priv->security_work);
2051 queue_work(priv->workqueue, &priv->wx_event_work);
2054 static void isr_indicate_rf_kill(struct ipw2100_priv *priv, u32 status)
2056 IPW_DEBUG_INFO("%s: RF Kill state changed to radio OFF.\n",
2057 priv->net_dev->name);
2059 /* RF_KILL is now enabled (else we wouldn't be here) */
2060 priv->status |= STATUS_RF_KILL_HW;
2062 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2063 if (priv->config & CFG_C3_DISABLED) {
2064 IPW_DEBUG_INFO(": Resetting C3 transitions.\n");
2065 acpi_set_cstate_limit(priv->cstate_limit);
2066 priv->config &= ~CFG_C3_DISABLED;
2070 /* Make sure the RF Kill check timer is running */
2071 priv->stop_rf_kill = 0;
2072 cancel_delayed_work(&priv->rf_kill);
2073 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
2076 static void isr_scan_complete(struct ipw2100_priv *priv, u32 status)
2078 IPW_DEBUG_SCAN("scan complete\n");
2079 /* Age the scan results... */
2080 priv->ieee->scans++;
2081 priv->status &= ~STATUS_SCANNING;
2084 #ifdef CONFIG_IPW_DEBUG
2085 #define IPW2100_HANDLER(v, f) { v, f, # v }
2086 struct ipw2100_status_indicator {
2088 void (*cb) (struct ipw2100_priv * priv, u32 status);
2092 #define IPW2100_HANDLER(v, f) { v, f }
2093 struct ipw2100_status_indicator {
2095 void (*cb) (struct ipw2100_priv * priv, u32 status);
2097 #endif /* CONFIG_IPW_DEBUG */
2099 static void isr_indicate_scanning(struct ipw2100_priv *priv, u32 status)
2101 IPW_DEBUG_SCAN("Scanning...\n");
2102 priv->status |= STATUS_SCANNING;
2105 static const struct ipw2100_status_indicator status_handlers[] = {
2106 IPW2100_HANDLER(IPW_STATE_INITIALIZED, NULL),
2107 IPW2100_HANDLER(IPW_STATE_COUNTRY_FOUND, NULL),
2108 IPW2100_HANDLER(IPW_STATE_ASSOCIATED, isr_indicate_associated),
2109 IPW2100_HANDLER(IPW_STATE_ASSN_LOST, isr_indicate_association_lost),
2110 IPW2100_HANDLER(IPW_STATE_ASSN_CHANGED, NULL),
2111 IPW2100_HANDLER(IPW_STATE_SCAN_COMPLETE, isr_scan_complete),
2112 IPW2100_HANDLER(IPW_STATE_ENTERED_PSP, NULL),
2113 IPW2100_HANDLER(IPW_STATE_LEFT_PSP, NULL),
2114 IPW2100_HANDLER(IPW_STATE_RF_KILL, isr_indicate_rf_kill),
2115 IPW2100_HANDLER(IPW_STATE_DISABLED, NULL),
2116 IPW2100_HANDLER(IPW_STATE_POWER_DOWN, NULL),
2117 IPW2100_HANDLER(IPW_STATE_SCANNING, isr_indicate_scanning),
2118 IPW2100_HANDLER(-1, NULL)
2121 static void isr_status_change(struct ipw2100_priv *priv, int status)
2125 if (status == IPW_STATE_SCANNING &&
2126 priv->status & STATUS_ASSOCIATED &&
2127 !(priv->status & STATUS_SCANNING)) {
2128 IPW_DEBUG_INFO("Scan detected while associated, with "
2129 "no scan request. Restarting firmware.\n");
2131 /* Wake up any sleeping jobs */
2132 schedule_reset(priv);
2135 for (i = 0; status_handlers[i].status != -1; i++) {
2136 if (status == status_handlers[i].status) {
2137 IPW_DEBUG_NOTIF("Status change: %s\n",
2138 status_handlers[i].name);
2139 if (status_handlers[i].cb)
2140 status_handlers[i].cb(priv, status);
2141 priv->wstats.status = status;
2146 IPW_DEBUG_NOTIF("unknown status received: %04x\n", status);
2149 static void isr_rx_complete_command(struct ipw2100_priv *priv,
2150 struct ipw2100_cmd_header *cmd)
2152 #ifdef CONFIG_IPW_DEBUG
2153 if (cmd->host_command_reg < ARRAY_SIZE(command_types)) {
2154 IPW_DEBUG_HC("Command completed '%s (%d)'\n",
2155 command_types[cmd->host_command_reg],
2156 cmd->host_command_reg);
2159 if (cmd->host_command_reg == HOST_COMPLETE)
2160 priv->status |= STATUS_ENABLED;
2162 if (cmd->host_command_reg == CARD_DISABLE)
2163 priv->status &= ~STATUS_ENABLED;
2165 priv->status &= ~STATUS_CMD_ACTIVE;
2167 wake_up_interruptible(&priv->wait_command_queue);
2170 #ifdef CONFIG_IPW_DEBUG
2171 static const char *frame_types[] = {
2172 "COMMAND_STATUS_VAL",
2173 "STATUS_CHANGE_VAL",
2176 "HOST_NOTIFICATION_VAL"
2180 static inline int ipw2100_alloc_skb(struct ipw2100_priv *priv,
2181 struct ipw2100_rx_packet *packet)
2183 packet->skb = dev_alloc_skb(sizeof(struct ipw2100_rx));
2187 packet->rxp = (struct ipw2100_rx *)packet->skb->data;
2188 packet->dma_addr = pci_map_single(priv->pci_dev, packet->skb->data,
2189 sizeof(struct ipw2100_rx),
2190 PCI_DMA_FROMDEVICE);
2191 /* NOTE: pci_map_single does not return an error code, and 0 is a valid
2197 #define SEARCH_ERROR 0xffffffff
2198 #define SEARCH_FAIL 0xfffffffe
2199 #define SEARCH_SUCCESS 0xfffffff0
2200 #define SEARCH_DISCARD 0
2201 #define SEARCH_SNAPSHOT 1
2203 #define SNAPSHOT_ADDR(ofs) (priv->snapshot[((ofs) >> 12) & 0xff] + ((ofs) & 0xfff))
2204 static inline int ipw2100_snapshot_alloc(struct ipw2100_priv *priv)
2207 if (priv->snapshot[0])
2209 for (i = 0; i < 0x30; i++) {
2210 priv->snapshot[i] = (u8 *) kmalloc(0x1000, GFP_ATOMIC);
2211 if (!priv->snapshot[i]) {
2212 IPW_DEBUG_INFO("%s: Error allocating snapshot "
2213 "buffer %d\n", priv->net_dev->name, i);
2215 kfree(priv->snapshot[--i]);
2216 priv->snapshot[0] = NULL;
2224 static inline void ipw2100_snapshot_free(struct ipw2100_priv *priv)
2227 if (!priv->snapshot[0])
2229 for (i = 0; i < 0x30; i++)
2230 kfree(priv->snapshot[i]);
2231 priv->snapshot[0] = NULL;
2234 static inline u32 ipw2100_match_buf(struct ipw2100_priv *priv, u8 * in_buf,
2235 size_t len, int mode)
2243 if (mode == SEARCH_SNAPSHOT) {
2244 if (!ipw2100_snapshot_alloc(priv))
2245 mode = SEARCH_DISCARD;
2248 for (ret = SEARCH_FAIL, i = 0; i < 0x30000; i += 4) {
2249 read_nic_dword(priv->net_dev, i, &tmp);
2250 if (mode == SEARCH_SNAPSHOT)
2251 *(u32 *) SNAPSHOT_ADDR(i) = tmp;
2252 if (ret == SEARCH_FAIL) {
2254 for (j = 0; j < 4; j++) {
2263 if ((s - in_buf) == len)
2264 ret = (i + j) - len + 1;
2266 } else if (mode == SEARCH_DISCARD)
2275 * 0) Disconnect the SKB from the firmware (just unmap)
2276 * 1) Pack the ETH header into the SKB
2277 * 2) Pass the SKB to the network stack
2279 * When packet is provided by the firmware, it contains the following:
2282 * . ieee80211_snap_hdr
2284 * The size of the constructed ethernet
2287 #ifdef CONFIG_IPW2100_RX_DEBUG
2288 static u8 packet_data[IPW_RX_NIC_BUFFER_LENGTH];
2291 static inline void ipw2100_corruption_detected(struct ipw2100_priv *priv, int i)
2293 #ifdef CONFIG_IPW_DEBUG_C3
2294 struct ipw2100_status *status = &priv->status_queue.drv[i];
2298 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2302 IPW_DEBUG_INFO(": PCI latency error detected at 0x%04zX.\n",
2303 i * sizeof(struct ipw2100_status));
2305 #ifdef ACPI_CSTATE_LIMIT_DEFINED
2306 IPW_DEBUG_INFO(": Disabling C3 transitions.\n");
2307 limit = acpi_get_cstate_limit();
2309 priv->cstate_limit = limit;
2310 acpi_set_cstate_limit(2);
2311 priv->config |= CFG_C3_DISABLED;
2315 #ifdef CONFIG_IPW_DEBUG_C3
2316 /* Halt the fimrware so we can get a good image */
2317 write_register(priv->net_dev, IPW_REG_RESET_REG,
2318 IPW_AUX_HOST_RESET_REG_STOP_MASTER);
2321 udelay(IPW_WAIT_RESET_MASTER_ASSERT_COMPLETE_DELAY);
2322 read_register(priv->net_dev, IPW_REG_RESET_REG, ®);
2324 if (reg & IPW_AUX_HOST_RESET_REG_MASTER_DISABLED)
2328 match = ipw2100_match_buf(priv, (u8 *) status,
2329 sizeof(struct ipw2100_status),
2331 if (match < SEARCH_SUCCESS)
2332 IPW_DEBUG_INFO("%s: DMA status match in Firmware at "
2333 "offset 0x%06X, length %d:\n",
2334 priv->net_dev->name, match,
2335 sizeof(struct ipw2100_status));
2337 IPW_DEBUG_INFO("%s: No DMA status match in "
2338 "Firmware.\n", priv->net_dev->name);
2340 printk_buf((u8 *) priv->status_queue.drv,
2341 sizeof(struct ipw2100_status) * RX_QUEUE_LENGTH);
2344 priv->fatal_error = IPW2100_ERR_C3_CORRUPTION;
2345 priv->ieee->stats.rx_errors++;
2346 schedule_reset(priv);
2349 static inline void isr_rx(struct ipw2100_priv *priv, int i,
2350 struct ieee80211_rx_stats *stats)
2352 struct ipw2100_status *status = &priv->status_queue.drv[i];
2353 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
2355 IPW_DEBUG_RX("Handler...\n");
2357 if (unlikely(status->frame_size > skb_tailroom(packet->skb))) {
2358 IPW_DEBUG_INFO("%s: frame_size (%u) > skb_tailroom (%u)!"
2360 priv->net_dev->name,
2361 status->frame_size, skb_tailroom(packet->skb));
2362 priv->ieee->stats.rx_errors++;
2366 if (unlikely(!netif_running(priv->net_dev))) {
2367 priv->ieee->stats.rx_errors++;
2368 priv->wstats.discard.misc++;
2369 IPW_DEBUG_DROP("Dropping packet while interface is not up.\n");
2372 #ifdef CONFIG_IPW2100_MONITOR
2373 if (unlikely(priv->ieee->iw_mode == IW_MODE_MONITOR &&
2374 priv->config & CFG_CRC_CHECK &&
2375 status->flags & IPW_STATUS_FLAG_CRC_ERROR)) {
2376 IPW_DEBUG_RX("CRC error in packet. Dropping.\n");
2377 priv->ieee->stats.rx_errors++;
2382 if (unlikely(priv->ieee->iw_mode != IW_MODE_MONITOR &&
2383 !(priv->status & STATUS_ASSOCIATED))) {
2384 IPW_DEBUG_DROP("Dropping packet while not associated.\n");
2385 priv->wstats.discard.misc++;
2389 pci_unmap_single(priv->pci_dev,
2391 sizeof(struct ipw2100_rx), PCI_DMA_FROMDEVICE);
2393 skb_put(packet->skb, status->frame_size);
2395 #ifdef CONFIG_IPW2100_RX_DEBUG
2396 /* Make a copy of the frame so we can dump it to the logs if
2397 * ieee80211_rx fails */
2398 memcpy(packet_data, packet->skb->data,
2399 min_t(u32, status->frame_size, IPW_RX_NIC_BUFFER_LENGTH));
2402 if (!ieee80211_rx(priv->ieee, packet->skb, stats)) {
2403 #ifdef CONFIG_IPW2100_RX_DEBUG
2404 IPW_DEBUG_DROP("%s: Non consumed packet:\n",
2405 priv->net_dev->name);
2406 printk_buf(IPW_DL_DROP, packet_data, status->frame_size);
2408 priv->ieee->stats.rx_errors++;
2410 /* ieee80211_rx failed, so it didn't free the SKB */
2411 dev_kfree_skb_any(packet->skb);
2415 /* We need to allocate a new SKB and attach it to the RDB. */
2416 if (unlikely(ipw2100_alloc_skb(priv, packet))) {
2417 printk(KERN_WARNING DRV_NAME ": "
2418 "%s: Unable to allocate SKB onto RBD ring - disabling "
2419 "adapter.\n", priv->net_dev->name);
2420 /* TODO: schedule adapter shutdown */
2421 IPW_DEBUG_INFO("TODO: Shutdown adapter...\n");
2424 /* Update the RDB entry */
2425 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
2428 static inline int ipw2100_corruption_check(struct ipw2100_priv *priv, int i)
2430 struct ipw2100_status *status = &priv->status_queue.drv[i];
2431 struct ipw2100_rx *u = priv->rx_buffers[i].rxp;
2432 u16 frame_type = status->status_fields & STATUS_TYPE_MASK;
2434 switch (frame_type) {
2435 case COMMAND_STATUS_VAL:
2436 return (status->frame_size != sizeof(u->rx_data.command));
2437 case STATUS_CHANGE_VAL:
2438 return (status->frame_size != sizeof(u->rx_data.status));
2439 case HOST_NOTIFICATION_VAL:
2440 return (status->frame_size < sizeof(u->rx_data.notification));
2441 case P80211_DATA_VAL:
2442 case P8023_DATA_VAL:
2443 #ifdef CONFIG_IPW2100_MONITOR
2446 switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
2447 case IEEE80211_FTYPE_MGMT:
2448 case IEEE80211_FTYPE_CTL:
2450 case IEEE80211_FTYPE_DATA:
2451 return (status->frame_size >
2452 IPW_MAX_802_11_PAYLOAD_LENGTH);
2461 * ipw2100 interrupts are disabled at this point, and the ISR
2462 * is the only code that calls this method. So, we do not need
2463 * to play with any locks.
2465 * RX Queue works as follows:
2467 * Read index - firmware places packet in entry identified by the
2468 * Read index and advances Read index. In this manner,
2469 * Read index will always point to the next packet to
2470 * be filled--but not yet valid.
2472 * Write index - driver fills this entry with an unused RBD entry.
2473 * This entry has not filled by the firmware yet.
2475 * In between the W and R indexes are the RBDs that have been received
2476 * but not yet processed.
2478 * The process of handling packets will start at WRITE + 1 and advance
2479 * until it reaches the READ index.
2481 * The WRITE index is cached in the variable 'priv->rx_queue.next'.
2484 static inline void __ipw2100_rx_process(struct ipw2100_priv *priv)
2486 struct ipw2100_bd_queue *rxq = &priv->rx_queue;
2487 struct ipw2100_status_queue *sq = &priv->status_queue;
2488 struct ipw2100_rx_packet *packet;
2491 struct ipw2100_rx *u;
2492 struct ieee80211_rx_stats stats = {
2493 .mac_time = jiffies,
2496 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_READ_INDEX, &r);
2497 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, &w);
2499 if (r >= rxq->entries) {
2500 IPW_DEBUG_RX("exit - bad read index\n");
2504 i = (rxq->next + 1) % rxq->entries;
2507 /* IPW_DEBUG_RX("r = %d : w = %d : processing = %d\n",
2508 r, rxq->next, i); */
2510 packet = &priv->rx_buffers[i];
2512 /* Sync the DMA for the STATUS buffer so CPU is sure to get
2513 * the correct values */
2514 pci_dma_sync_single_for_cpu(priv->pci_dev,
2516 sizeof(struct ipw2100_status) * i,
2517 sizeof(struct ipw2100_status),
2518 PCI_DMA_FROMDEVICE);
2520 /* Sync the DMA for the RX buffer so CPU is sure to get
2521 * the correct values */
2522 pci_dma_sync_single_for_cpu(priv->pci_dev, packet->dma_addr,
2523 sizeof(struct ipw2100_rx),
2524 PCI_DMA_FROMDEVICE);
2526 if (unlikely(ipw2100_corruption_check(priv, i))) {
2527 ipw2100_corruption_detected(priv, i);
2532 frame_type = sq->drv[i].status_fields & STATUS_TYPE_MASK;
2533 stats.rssi = sq->drv[i].rssi + IPW2100_RSSI_TO_DBM;
2534 stats.len = sq->drv[i].frame_size;
2537 if (stats.rssi != 0)
2538 stats.mask |= IEEE80211_STATMASK_RSSI;
2539 stats.freq = IEEE80211_24GHZ_BAND;
2541 IPW_DEBUG_RX("%s: '%s' frame type received (%d).\n",
2542 priv->net_dev->name, frame_types[frame_type],
2545 switch (frame_type) {
2546 case COMMAND_STATUS_VAL:
2547 /* Reset Rx watchdog */
2548 isr_rx_complete_command(priv, &u->rx_data.command);
2551 case STATUS_CHANGE_VAL:
2552 isr_status_change(priv, u->rx_data.status);
2555 case P80211_DATA_VAL:
2556 case P8023_DATA_VAL:
2557 #ifdef CONFIG_IPW2100_MONITOR
2558 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
2559 isr_rx(priv, i, &stats);
2563 if (stats.len < sizeof(u->rx_data.header))
2565 switch (WLAN_FC_GET_TYPE(u->rx_data.header.frame_ctl)) {
2566 case IEEE80211_FTYPE_MGMT:
2567 ieee80211_rx_mgt(priv->ieee,
2568 &u->rx_data.header, &stats);
2571 case IEEE80211_FTYPE_CTL:
2574 case IEEE80211_FTYPE_DATA:
2575 isr_rx(priv, i, &stats);
2583 /* clear status field associated with this RBD */
2584 rxq->drv[i].status.info.field = 0;
2586 i = (i + 1) % rxq->entries;
2590 /* backtrack one entry, wrapping to end if at 0 */
2591 rxq->next = (i ? i : rxq->entries) - 1;
2593 write_register(priv->net_dev,
2594 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX, rxq->next);
2599 * __ipw2100_tx_process
2601 * This routine will determine whether the next packet on
2602 * the fw_pend_list has been processed by the firmware yet.
2604 * If not, then it does nothing and returns.
2606 * If so, then it removes the item from the fw_pend_list, frees
2607 * any associated storage, and places the item back on the
2608 * free list of its source (either msg_free_list or tx_free_list)
2610 * TX Queue works as follows:
2612 * Read index - points to the next TBD that the firmware will
2613 * process. The firmware will read the data, and once
2614 * done processing, it will advance the Read index.
2616 * Write index - driver fills this entry with an constructed TBD
2617 * entry. The Write index is not advanced until the
2618 * packet has been configured.
2620 * In between the W and R indexes are the TBDs that have NOT been
2621 * processed. Lagging behind the R index are packets that have
2622 * been processed but have not been freed by the driver.
2624 * In order to free old storage, an internal index will be maintained
2625 * that points to the next packet to be freed. When all used
2626 * packets have been freed, the oldest index will be the same as the
2627 * firmware's read index.
2629 * The OLDEST index is cached in the variable 'priv->tx_queue.oldest'
2631 * Because the TBD structure can not contain arbitrary data, the
2632 * driver must keep an internal queue of cached allocations such that
2633 * it can put that data back into the tx_free_list and msg_free_list
2634 * for use by future command and data packets.
2637 static inline int __ipw2100_tx_process(struct ipw2100_priv *priv)
2639 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2640 struct ipw2100_bd *tbd;
2641 struct list_head *element;
2642 struct ipw2100_tx_packet *packet;
2643 int descriptors_used;
2645 u32 r, w, frag_num = 0;
2647 if (list_empty(&priv->fw_pend_list))
2650 element = priv->fw_pend_list.next;
2652 packet = list_entry(element, struct ipw2100_tx_packet, list);
2653 tbd = &txq->drv[packet->index];
2655 /* Determine how many TBD entries must be finished... */
2656 switch (packet->type) {
2658 /* COMMAND uses only one slot; don't advance */
2659 descriptors_used = 1;
2664 /* DATA uses two slots; advance and loop position. */
2665 descriptors_used = tbd->num_fragments;
2666 frag_num = tbd->num_fragments - 1;
2667 e = txq->oldest + frag_num;
2672 printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
2673 priv->net_dev->name);
2677 /* if the last TBD is not done by NIC yet, then packet is
2678 * not ready to be released.
2681 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
2683 read_register(priv->net_dev, IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2686 printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
2687 priv->net_dev->name);
2690 * txq->next is the index of the last packet written txq->oldest is
2691 * the index of the r is the index of the next packet to be read by
2696 * Quick graphic to help you visualize the following
2697 * if / else statement
2699 * ===>| s---->|===============
2701 * | a | b | c | d | e | f | g | h | i | j | k | l
2705 * w - updated by driver
2706 * r - updated by firmware
2707 * s - start of oldest BD entry (txq->oldest)
2708 * e - end of oldest BD entry
2711 if (!((r <= w && (e < r || e >= w)) || (e < r && e >= w))) {
2712 IPW_DEBUG_TX("exit - no processed packets ready to release.\n");
2717 DEC_STAT(&priv->fw_pend_stat);
2719 #ifdef CONFIG_IPW_DEBUG
2721 int i = txq->oldest;
2722 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2724 (u32) (txq->nic + i * sizeof(struct ipw2100_bd)),
2725 txq->drv[i].host_addr, txq->drv[i].buf_length);
2727 if (packet->type == DATA) {
2728 i = (i + 1) % txq->entries;
2730 IPW_DEBUG_TX("TX%d V=%p P=%04X T=%04X L=%d\n", i,
2732 (u32) (txq->nic + i *
2733 sizeof(struct ipw2100_bd)),
2734 (u32) txq->drv[i].host_addr,
2735 txq->drv[i].buf_length);
2740 switch (packet->type) {
2742 if (txq->drv[txq->oldest].status.info.fields.txType != 0)
2743 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2744 "Expecting DATA TBD but pulled "
2745 "something else: ids %d=%d.\n",
2746 priv->net_dev->name, txq->oldest, packet->index);
2748 /* DATA packet; we have to unmap and free the SKB */
2749 for (i = 0; i < frag_num; i++) {
2750 tbd = &txq->drv[(packet->index + 1 + i) % txq->entries];
2752 IPW_DEBUG_TX("TX%d P=%08x L=%d\n",
2753 (packet->index + 1 + i) % txq->entries,
2754 tbd->host_addr, tbd->buf_length);
2756 pci_unmap_single(priv->pci_dev,
2758 tbd->buf_length, PCI_DMA_TODEVICE);
2761 ieee80211_txb_free(packet->info.d_struct.txb);
2762 packet->info.d_struct.txb = NULL;
2764 list_add_tail(element, &priv->tx_free_list);
2765 INC_STAT(&priv->tx_free_stat);
2767 /* We have a free slot in the Tx queue, so wake up the
2768 * transmit layer if it is stopped. */
2769 if (priv->status & STATUS_ASSOCIATED)
2770 netif_wake_queue(priv->net_dev);
2772 /* A packet was processed by the hardware, so update the
2774 priv->net_dev->trans_start = jiffies;
2779 if (txq->drv[txq->oldest].status.info.fields.txType != 1)
2780 printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
2781 "Expecting COMMAND TBD but pulled "
2782 "something else: ids %d=%d.\n",
2783 priv->net_dev->name, txq->oldest, packet->index);
2785 #ifdef CONFIG_IPW_DEBUG
2786 if (packet->info.c_struct.cmd->host_command_reg <
2787 sizeof(command_types) / sizeof(*command_types))
2788 IPW_DEBUG_TX("Command '%s (%d)' processed: %d.\n",
2789 command_types[packet->info.c_struct.cmd->
2791 packet->info.c_struct.cmd->
2793 packet->info.c_struct.cmd->cmd_status_reg);
2796 list_add_tail(element, &priv->msg_free_list);
2797 INC_STAT(&priv->msg_free_stat);
2801 /* advance oldest used TBD pointer to start of next entry */
2802 txq->oldest = (e + 1) % txq->entries;
2803 /* increase available TBDs number */
2804 txq->available += descriptors_used;
2805 SET_STAT(&priv->txq_stat, txq->available);
2807 IPW_DEBUG_TX("packet latency (send to process) %ld jiffies\n",
2808 jiffies - packet->jiffy_start);
2810 return (!list_empty(&priv->fw_pend_list));
2813 static inline void __ipw2100_tx_complete(struct ipw2100_priv *priv)
2817 while (__ipw2100_tx_process(priv) && i < 200)
2821 printk(KERN_WARNING DRV_NAME ": "
2822 "%s: Driver is running slow (%d iters).\n",
2823 priv->net_dev->name, i);
2827 static void ipw2100_tx_send_commands(struct ipw2100_priv *priv)
2829 struct list_head *element;
2830 struct ipw2100_tx_packet *packet;
2831 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2832 struct ipw2100_bd *tbd;
2833 int next = txq->next;
2835 while (!list_empty(&priv->msg_pend_list)) {
2836 /* if there isn't enough space in TBD queue, then
2837 * don't stuff a new one in.
2838 * NOTE: 3 are needed as a command will take one,
2839 * and there is a minimum of 2 that must be
2840 * maintained between the r and w indexes
2842 if (txq->available <= 3) {
2843 IPW_DEBUG_TX("no room in tx_queue\n");
2847 element = priv->msg_pend_list.next;
2849 DEC_STAT(&priv->msg_pend_stat);
2851 packet = list_entry(element, struct ipw2100_tx_packet, list);
2853 IPW_DEBUG_TX("using TBD at virt=%p, phys=%p\n",
2854 &txq->drv[txq->next],
2855 (void *)(txq->nic + txq->next *
2856 sizeof(struct ipw2100_bd)));
2858 packet->index = txq->next;
2860 tbd = &txq->drv[txq->next];
2862 /* initialize TBD */
2863 tbd->host_addr = packet->info.c_struct.cmd_phys;
2864 tbd->buf_length = sizeof(struct ipw2100_cmd_header);
2865 /* not marking number of fragments causes problems
2866 * with f/w debug version */
2867 tbd->num_fragments = 1;
2868 tbd->status.info.field =
2869 IPW_BD_STATUS_TX_FRAME_COMMAND |
2870 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
2872 /* update TBD queue counters */
2874 txq->next %= txq->entries;
2876 DEC_STAT(&priv->txq_stat);
2878 list_add_tail(element, &priv->fw_pend_list);
2879 INC_STAT(&priv->fw_pend_stat);
2882 if (txq->next != next) {
2883 /* kick off the DMA by notifying firmware the
2884 * write index has moved; make sure TBD stores are sync'd */
2886 write_register(priv->net_dev,
2887 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
2893 * ipw2100_tx_send_data
2896 static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
2898 struct list_head *element;
2899 struct ipw2100_tx_packet *packet;
2900 struct ipw2100_bd_queue *txq = &priv->tx_queue;
2901 struct ipw2100_bd *tbd;
2902 int next = txq->next;
2904 struct ipw2100_data_header *ipw_hdr;
2905 struct ieee80211_hdr_3addr *hdr;
2907 while (!list_empty(&priv->tx_pend_list)) {
2908 /* if there isn't enough space in TBD queue, then
2909 * don't stuff a new one in.
2910 * NOTE: 4 are needed as a data will take two,
2911 * and there is a minimum of 2 that must be
2912 * maintained between the r and w indexes
2914 element = priv->tx_pend_list.next;
2915 packet = list_entry(element, struct ipw2100_tx_packet, list);
2917 if (unlikely(1 + packet->info.d_struct.txb->nr_frags >
2919 /* TODO: Support merging buffers if more than
2920 * IPW_MAX_BDS are used */
2921 IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded. "
2922 "Increase fragmentation level.\n",
2923 priv->net_dev->name);
2926 if (txq->available <= 3 + packet->info.d_struct.txb->nr_frags) {
2927 IPW_DEBUG_TX("no room in tx_queue\n");
2932 DEC_STAT(&priv->tx_pend_stat);
2934 tbd = &txq->drv[txq->next];
2936 packet->index = txq->next;
2938 ipw_hdr = packet->info.d_struct.data;
2939 hdr = (struct ieee80211_hdr_3addr *)packet->info.d_struct.txb->
2942 if (priv->ieee->iw_mode == IW_MODE_INFRA) {
2943 /* To DS: Addr1 = BSSID, Addr2 = SA,
2945 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
2946 memcpy(ipw_hdr->dst_addr, hdr->addr3, ETH_ALEN);
2947 } else if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
2948 /* not From/To DS: Addr1 = DA, Addr2 = SA,
2950 memcpy(ipw_hdr->src_addr, hdr->addr2, ETH_ALEN);
2951 memcpy(ipw_hdr->dst_addr, hdr->addr1, ETH_ALEN);
2954 ipw_hdr->host_command_reg = SEND;
2955 ipw_hdr->host_command_reg1 = 0;
2957 /* For now we only support host based encryption */
2958 ipw_hdr->needs_encryption = 0;
2959 ipw_hdr->encrypted = packet->info.d_struct.txb->encrypted;
2960 if (packet->info.d_struct.txb->nr_frags > 1)
2961 ipw_hdr->fragment_size =
2962 packet->info.d_struct.txb->frag_size -
2963 IEEE80211_3ADDR_LEN;
2965 ipw_hdr->fragment_size = 0;
2967 tbd->host_addr = packet->info.d_struct.data_phys;
2968 tbd->buf_length = sizeof(struct ipw2100_data_header);
2969 tbd->num_fragments = 1 + packet->info.d_struct.txb->nr_frags;
2970 tbd->status.info.field =
2971 IPW_BD_STATUS_TX_FRAME_802_3 |
2972 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
2974 txq->next %= txq->entries;
2976 IPW_DEBUG_TX("data header tbd TX%d P=%08x L=%d\n",
2977 packet->index, tbd->host_addr, tbd->buf_length);
2978 #ifdef CONFIG_IPW_DEBUG
2979 if (packet->info.d_struct.txb->nr_frags > 1)
2980 IPW_DEBUG_FRAG("fragment Tx: %d frames\n",
2981 packet->info.d_struct.txb->nr_frags);
2984 for (i = 0; i < packet->info.d_struct.txb->nr_frags; i++) {
2985 tbd = &txq->drv[txq->next];
2986 if (i == packet->info.d_struct.txb->nr_frags - 1)
2987 tbd->status.info.field =
2988 IPW_BD_STATUS_TX_FRAME_802_3 |
2989 IPW_BD_STATUS_TX_INTERRUPT_ENABLE;
2991 tbd->status.info.field =
2992 IPW_BD_STATUS_TX_FRAME_802_3 |
2993 IPW_BD_STATUS_TX_FRAME_NOT_LAST_FRAGMENT;
2995 tbd->buf_length = packet->info.d_struct.txb->
2996 fragments[i]->len - IEEE80211_3ADDR_LEN;
2998 tbd->host_addr = pci_map_single(priv->pci_dev,
2999 packet->info.d_struct.
3002 IEEE80211_3ADDR_LEN,
3006 IPW_DEBUG_TX("data frag tbd TX%d P=%08x L=%d\n",
3007 txq->next, tbd->host_addr,
3010 pci_dma_sync_single_for_device(priv->pci_dev,
3016 txq->next %= txq->entries;
3019 txq->available -= 1 + packet->info.d_struct.txb->nr_frags;
3020 SET_STAT(&priv->txq_stat, txq->available);
3022 list_add_tail(element, &priv->fw_pend_list);
3023 INC_STAT(&priv->fw_pend_stat);
3026 if (txq->next != next) {
3027 /* kick off the DMA by notifying firmware the
3028 * write index has moved; make sure TBD stores are sync'd */
3029 write_register(priv->net_dev,
3030 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX,
3036 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv)
3038 struct net_device *dev = priv->net_dev;
3039 unsigned long flags;
3042 spin_lock_irqsave(&priv->low_lock, flags);
3043 ipw2100_disable_interrupts(priv);
3045 read_register(dev, IPW_REG_INTA, &inta);
3047 IPW_DEBUG_ISR("enter - INTA: 0x%08lX\n",
3048 (unsigned long)inta & IPW_INTERRUPT_MASK);
3053 /* We do not loop and keep polling for more interrupts as this
3054 * is frowned upon and doesn't play nicely with other potentially
3056 IPW_DEBUG_ISR("INTA: 0x%08lX\n",
3057 (unsigned long)inta & IPW_INTERRUPT_MASK);
3059 if (inta & IPW2100_INTA_FATAL_ERROR) {
3060 printk(KERN_WARNING DRV_NAME
3061 ": Fatal interrupt. Scheduling firmware restart.\n");
3063 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FATAL_ERROR);
3065 read_nic_dword(dev, IPW_NIC_FATAL_ERROR, &priv->fatal_error);
3066 IPW_DEBUG_INFO("%s: Fatal error value: 0x%08X\n",
3067 priv->net_dev->name, priv->fatal_error);
3069 read_nic_dword(dev, IPW_ERROR_ADDR(priv->fatal_error), &tmp);
3070 IPW_DEBUG_INFO("%s: Fatal error address value: 0x%08X\n",
3071 priv->net_dev->name, tmp);
3073 /* Wake up any sleeping jobs */
3074 schedule_reset(priv);
3077 if (inta & IPW2100_INTA_PARITY_ERROR) {
3078 printk(KERN_ERR DRV_NAME
3079 ": ***** PARITY ERROR INTERRUPT !!!! \n");
3081 write_register(dev, IPW_REG_INTA, IPW2100_INTA_PARITY_ERROR);
3084 if (inta & IPW2100_INTA_RX_TRANSFER) {
3085 IPW_DEBUG_ISR("RX interrupt\n");
3087 priv->rx_interrupts++;
3089 write_register(dev, IPW_REG_INTA, IPW2100_INTA_RX_TRANSFER);
3091 __ipw2100_rx_process(priv);
3092 __ipw2100_tx_complete(priv);
3095 if (inta & IPW2100_INTA_TX_TRANSFER) {
3096 IPW_DEBUG_ISR("TX interrupt\n");
3098 priv->tx_interrupts++;
3100 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_TRANSFER);
3102 __ipw2100_tx_complete(priv);
3103 ipw2100_tx_send_commands(priv);
3104 ipw2100_tx_send_data(priv);
3107 if (inta & IPW2100_INTA_TX_COMPLETE) {
3108 IPW_DEBUG_ISR("TX complete\n");
3110 write_register(dev, IPW_REG_INTA, IPW2100_INTA_TX_COMPLETE);
3112 __ipw2100_tx_complete(priv);
3115 if (inta & IPW2100_INTA_EVENT_INTERRUPT) {
3116 /* ipw2100_handle_event(dev); */
3118 write_register(dev, IPW_REG_INTA, IPW2100_INTA_EVENT_INTERRUPT);
3121 if (inta & IPW2100_INTA_FW_INIT_DONE) {
3122 IPW_DEBUG_ISR("FW init done interrupt\n");
3125 read_register(dev, IPW_REG_INTA, &tmp);
3126 if (tmp & (IPW2100_INTA_FATAL_ERROR |
3127 IPW2100_INTA_PARITY_ERROR)) {
3128 write_register(dev, IPW_REG_INTA,
3129 IPW2100_INTA_FATAL_ERROR |
3130 IPW2100_INTA_PARITY_ERROR);
3133 write_register(dev, IPW_REG_INTA, IPW2100_INTA_FW_INIT_DONE);
3136 if (inta & IPW2100_INTA_STATUS_CHANGE) {
3137 IPW_DEBUG_ISR("Status change interrupt\n");
3139 write_register(dev, IPW_REG_INTA, IPW2100_INTA_STATUS_CHANGE);
3142 if (inta & IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE) {
3143 IPW_DEBUG_ISR("slave host mode interrupt\n");
3145 write_register(dev, IPW_REG_INTA,
3146 IPW2100_INTA_SLAVE_MODE_HOST_COMMAND_DONE);
3150 ipw2100_enable_interrupts(priv);
3152 spin_unlock_irqrestore(&priv->low_lock, flags);
3154 IPW_DEBUG_ISR("exit\n");
3157 static irqreturn_t ipw2100_interrupt(int irq, void *data, struct pt_regs *regs)
3159 struct ipw2100_priv *priv = data;
3160 u32 inta, inta_mask;
3165 spin_lock(&priv->low_lock);
3167 /* We check to see if we should be ignoring interrupts before
3168 * we touch the hardware. During ucode load if we try and handle
3169 * an interrupt we can cause keyboard problems as well as cause
3170 * the ucode to fail to initialize */
3171 if (!(priv->status & STATUS_INT_ENABLED)) {
3176 read_register(priv->net_dev, IPW_REG_INTA_MASK, &inta_mask);
3177 read_register(priv->net_dev, IPW_REG_INTA, &inta);
3179 if (inta == 0xFFFFFFFF) {
3180 /* Hardware disappeared */
3181 printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
3185 inta &= IPW_INTERRUPT_MASK;
3187 if (!(inta & inta_mask)) {
3188 /* Shared interrupt */
3192 /* We disable the hardware interrupt here just to prevent unneeded
3193 * calls to be made. We disable this again within the actual
3194 * work tasklet, so if another part of the code re-enables the
3195 * interrupt, that is fine */
3196 ipw2100_disable_interrupts(priv);
3198 tasklet_schedule(&priv->irq_tasklet);
3199 spin_unlock(&priv->low_lock);
3203 spin_unlock(&priv->low_lock);
3207 static int ipw2100_tx(struct ieee80211_txb *txb, struct net_device *dev,
3210 struct ipw2100_priv *priv = ieee80211_priv(dev);
3211 struct list_head *element;
3212 struct ipw2100_tx_packet *packet;
3213 unsigned long flags;
3215 spin_lock_irqsave(&priv->low_lock, flags);
3217 if (!(priv->status & STATUS_ASSOCIATED)) {
3218 IPW_DEBUG_INFO("Can not transmit when not connected.\n");
3219 priv->ieee->stats.tx_carrier_errors++;
3220 netif_stop_queue(dev);
3224 if (list_empty(&priv->tx_free_list))
3227 element = priv->tx_free_list.next;
3228 packet = list_entry(element, struct ipw2100_tx_packet, list);
3230 packet->info.d_struct.txb = txb;
3232 IPW_DEBUG_TX("Sending fragment (%d bytes):\n", txb->fragments[0]->len);
3233 printk_buf(IPW_DL_TX, txb->fragments[0]->data, txb->fragments[0]->len);
3235 packet->jiffy_start = jiffies;
3238 DEC_STAT(&priv->tx_free_stat);
3240 list_add_tail(element, &priv->tx_pend_list);
3241 INC_STAT(&priv->tx_pend_stat);
3243 ipw2100_tx_send_data(priv);
3245 spin_unlock_irqrestore(&priv->low_lock, flags);
3249 netif_stop_queue(dev);
3250 spin_unlock_irqrestore(&priv->low_lock, flags);
3254 static int ipw2100_msg_allocate(struct ipw2100_priv *priv)
3256 int i, j, err = -EINVAL;
3261 (struct ipw2100_tx_packet *)kmalloc(IPW_COMMAND_POOL_SIZE *
3265 if (!priv->msg_buffers) {
3266 printk(KERN_ERR DRV_NAME ": %s: PCI alloc failed for msg "
3267 "buffers.\n", priv->net_dev->name);
3271 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3272 v = pci_alloc_consistent(priv->pci_dev,
3273 sizeof(struct ipw2100_cmd_header), &p);
3275 printk(KERN_ERR DRV_NAME ": "
3276 "%s: PCI alloc failed for msg "
3277 "buffers.\n", priv->net_dev->name);
3282 memset(v, 0, sizeof(struct ipw2100_cmd_header));
3284 priv->msg_buffers[i].type = COMMAND;
3285 priv->msg_buffers[i].info.c_struct.cmd =
3286 (struct ipw2100_cmd_header *)v;
3287 priv->msg_buffers[i].info.c_struct.cmd_phys = p;
3290 if (i == IPW_COMMAND_POOL_SIZE)
3293 for (j = 0; j < i; j++) {
3294 pci_free_consistent(priv->pci_dev,
3295 sizeof(struct ipw2100_cmd_header),
3296 priv->msg_buffers[j].info.c_struct.cmd,
3297 priv->msg_buffers[j].info.c_struct.
3301 kfree(priv->msg_buffers);
3302 priv->msg_buffers = NULL;
3307 static int ipw2100_msg_initialize(struct ipw2100_priv *priv)
3311 INIT_LIST_HEAD(&priv->msg_free_list);
3312 INIT_LIST_HEAD(&priv->msg_pend_list);
3314 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++)
3315 list_add_tail(&priv->msg_buffers[i].list, &priv->msg_free_list);
3316 SET_STAT(&priv->msg_free_stat, i);
3321 static void ipw2100_msg_free(struct ipw2100_priv *priv)
3325 if (!priv->msg_buffers)
3328 for (i = 0; i < IPW_COMMAND_POOL_SIZE; i++) {
3329 pci_free_consistent(priv->pci_dev,
3330 sizeof(struct ipw2100_cmd_header),
3331 priv->msg_buffers[i].info.c_struct.cmd,
3332 priv->msg_buffers[i].info.c_struct.
3336 kfree(priv->msg_buffers);
3337 priv->msg_buffers = NULL;
3340 static ssize_t show_pci(struct device *d, struct device_attribute *attr,
3343 struct pci_dev *pci_dev = container_of(d, struct pci_dev, dev);
3348 for (i = 0; i < 16; i++) {
3349 out += sprintf(out, "[%08X] ", i * 16);
3350 for (j = 0; j < 16; j += 4) {
3351 pci_read_config_dword(pci_dev, i * 16 + j, &val);
3352 out += sprintf(out, "%08X ", val);
3354 out += sprintf(out, "\n");
3360 static DEVICE_ATTR(pci, S_IRUGO, show_pci, NULL);
3362 static ssize_t show_cfg(struct device *d, struct device_attribute *attr,
3365 struct ipw2100_priv *p = d->driver_data;
3366 return sprintf(buf, "0x%08x\n", (int)p->config);
3369 static DEVICE_ATTR(cfg, S_IRUGO, show_cfg, NULL);
3371 static ssize_t show_status(struct device *d, struct device_attribute *attr,
3374 struct ipw2100_priv *p = d->driver_data;
3375 return sprintf(buf, "0x%08x\n", (int)p->status);
3378 static DEVICE_ATTR(status, S_IRUGO, show_status, NULL);
3380 static ssize_t show_capability(struct device *d, struct device_attribute *attr,
3383 struct ipw2100_priv *p = d->driver_data;
3384 return sprintf(buf, "0x%08x\n", (int)p->capability);
3387 static DEVICE_ATTR(capability, S_IRUGO, show_capability, NULL);
3389 #define IPW2100_REG(x) { IPW_ ##x, #x }
3390 static const struct {
3394 IPW2100_REG(REG_GP_CNTRL),
3395 IPW2100_REG(REG_GPIO),
3396 IPW2100_REG(REG_INTA),
3397 IPW2100_REG(REG_INTA_MASK), IPW2100_REG(REG_RESET_REG),};
3398 #define IPW2100_NIC(x, s) { x, #x, s }
3399 static const struct {
3404 IPW2100_NIC(IPW2100_CONTROL_REG, 2),
3405 IPW2100_NIC(0x210014, 1), IPW2100_NIC(0x210000, 1),};
3406 #define IPW2100_ORD(x, d) { IPW_ORD_ ##x, #x, d }
3407 static const struct {
3412 IPW2100_ORD(STAT_TX_HOST_REQUESTS, "requested Host Tx's (MSDU)"),
3413 IPW2100_ORD(STAT_TX_HOST_COMPLETE,
3414 "successful Host Tx's (MSDU)"),
3415 IPW2100_ORD(STAT_TX_DIR_DATA,
3416 "successful Directed Tx's (MSDU)"),
3417 IPW2100_ORD(STAT_TX_DIR_DATA1,
3418 "successful Directed Tx's (MSDU) @ 1MB"),
3419 IPW2100_ORD(STAT_TX_DIR_DATA2,
3420 "successful Directed Tx's (MSDU) @ 2MB"),
3421 IPW2100_ORD(STAT_TX_DIR_DATA5_5,
3422 "successful Directed Tx's (MSDU) @ 5_5MB"),
3423 IPW2100_ORD(STAT_TX_DIR_DATA11,
3424 "successful Directed Tx's (MSDU) @ 11MB"),
3425 IPW2100_ORD(STAT_TX_NODIR_DATA1,
3426 "successful Non_Directed Tx's (MSDU) @ 1MB"),
3427 IPW2100_ORD(STAT_TX_NODIR_DATA2,
3428 "successful Non_Directed Tx's (MSDU) @ 2MB"),
3429 IPW2100_ORD(STAT_TX_NODIR_DATA5_5,
3430 "successful Non_Directed Tx's (MSDU) @ 5.5MB"),
3431 IPW2100_ORD(STAT_TX_NODIR_DATA11,
3432 "successful Non_Directed Tx's (MSDU) @ 11MB"),
3433 IPW2100_ORD(STAT_NULL_DATA, "successful NULL data Tx's"),
3434 IPW2100_ORD(STAT_TX_RTS, "successful Tx RTS"),
3435 IPW2100_ORD(STAT_TX_CTS, "successful Tx CTS"),
3436 IPW2100_ORD(STAT_TX_ACK, "successful Tx ACK"),
3437 IPW2100_ORD(STAT_TX_ASSN, "successful Association Tx's"),
3438 IPW2100_ORD(STAT_TX_ASSN_RESP,
3439 "successful Association response Tx's"),
3440 IPW2100_ORD(STAT_TX_REASSN,
3441 "successful Reassociation Tx's"),
3442 IPW2100_ORD(STAT_TX_REASSN_RESP,
3443 "successful Reassociation response Tx's"),
3444 IPW2100_ORD(STAT_TX_PROBE,
3445 "probes successfully transmitted"),
3446 IPW2100_ORD(STAT_TX_PROBE_RESP,
3447 "probe responses successfully transmitted"),
3448 IPW2100_ORD(STAT_TX_BEACON, "tx beacon"),
3449 IPW2100_ORD(STAT_TX_ATIM, "Tx ATIM"),
3450 IPW2100_ORD(STAT_TX_DISASSN,
3451 "successful Disassociation TX"),
3452 IPW2100_ORD(STAT_TX_AUTH, "successful Authentication Tx"),
3453 IPW2100_ORD(STAT_TX_DEAUTH,
3454 "successful Deauthentication TX"),
3455 IPW2100_ORD(STAT_TX_TOTAL_BYTES,
3456 "Total successful Tx data bytes"),
3457 IPW2100_ORD(STAT_TX_RETRIES, "Tx retries"),
3458 IPW2100_ORD(STAT_TX_RETRY1, "Tx retries at 1MBPS"),
3459 IPW2100_ORD(STAT_TX_RETRY2, "Tx retries at 2MBPS"),
3460 IPW2100_ORD(STAT_TX_RETRY5_5, "Tx retries at 5.5MBPS"),
3461 IPW2100_ORD(STAT_TX_RETRY11, "Tx retries at 11MBPS"),
3462 IPW2100_ORD(STAT_TX_FAILURES, "Tx Failures"),
3463 IPW2100_ORD(STAT_TX_MAX_TRIES_IN_HOP,
3464 "times max tries in a hop failed"),
3465 IPW2100_ORD(STAT_TX_DISASSN_FAIL,
3466 "times disassociation failed"),
3467 IPW2100_ORD(STAT_TX_ERR_CTS, "missed/bad CTS frames"),
3468 IPW2100_ORD(STAT_TX_ERR_ACK, "tx err due to acks"),
3469 IPW2100_ORD(STAT_RX_HOST, "packets passed to host"),
3470 IPW2100_ORD(STAT_RX_DIR_DATA, "directed packets"),
3471 IPW2100_ORD(STAT_RX_DIR_DATA1, "directed packets at 1MB"),
3472 IPW2100_ORD(STAT_RX_DIR_DATA2, "directed packets at 2MB"),
3473 IPW2100_ORD(STAT_RX_DIR_DATA5_5,
3474 "directed packets at 5.5MB"),
3475 IPW2100_ORD(STAT_RX_DIR_DATA11, "directed packets at 11MB"),
3476 IPW2100_ORD(STAT_RX_NODIR_DATA, "nondirected packets"),
3477 IPW2100_ORD(STAT_RX_NODIR_DATA1,
3478 "nondirected packets at 1MB"),
3479 IPW2100_ORD(STAT_RX_NODIR_DATA2,
3480 "nondirected packets at 2MB"),
3481 IPW2100_ORD(STAT_RX_NODIR_DATA5_5,
3482 "nondirected packets at 5.5MB"),
3483 IPW2100_ORD(STAT_RX_NODIR_DATA11,
3484 "nondirected packets at 11MB"),
3485 IPW2100_ORD(STAT_RX_NULL_DATA, "null data rx's"),
3486 IPW2100_ORD(STAT_RX_RTS, "Rx RTS"), IPW2100_ORD(STAT_RX_CTS,
3488 IPW2100_ORD(STAT_RX_ACK, "Rx ACK"),
3489 IPW2100_ORD(STAT_RX_CFEND, "Rx CF End"),
3490 IPW2100_ORD(STAT_RX_CFEND_ACK, "Rx CF End + CF Ack"),
3491 IPW2100_ORD(STAT_RX_ASSN, "Association Rx's"),
3492 IPW2100_ORD(STAT_RX_ASSN_RESP, "Association response Rx's"),
3493 IPW2100_ORD(STAT_RX_REASSN, "Reassociation Rx's"),
3494 IPW2100_ORD(STAT_RX_REASSN_RESP,
3495 "Reassociation response Rx's"),
3496 IPW2100_ORD(STAT_RX_PROBE, "probe Rx's"),
3497 IPW2100_ORD(STAT_RX_PROBE_RESP, "probe response Rx's"),
3498 IPW2100_ORD(STAT_RX_BEACON, "Rx beacon"),
3499 IPW2100_ORD(STAT_RX_ATIM, "Rx ATIM"),
3500 IPW2100_ORD(STAT_RX_DISASSN, "disassociation Rx"),
3501 IPW2100_ORD(STAT_RX_AUTH, "authentication Rx"),
3502 IPW2100_ORD(STAT_RX_DEAUTH, "deauthentication Rx"),
3503 IPW2100_ORD(STAT_RX_TOTAL_BYTES,
3504 "Total rx data bytes received"),
3505 IPW2100_ORD(STAT_RX_ERR_CRC, "packets with Rx CRC error"),
3506 IPW2100_ORD(STAT_RX_ERR_CRC1, "Rx CRC errors at 1MB"),
3507 IPW2100_ORD(STAT_RX_ERR_CRC2, "Rx CRC errors at 2MB"),
3508 IPW2100_ORD(STAT_RX_ERR_CRC5_5, "Rx CRC errors at 5.5MB"),
3509 IPW2100_ORD(STAT_RX_ERR_CRC11, "Rx CRC errors at 11MB"),
3510 IPW2100_ORD(STAT_RX_DUPLICATE1,
3511 "duplicate rx packets at 1MB"),
3512 IPW2100_ORD(STAT_RX_DUPLICATE2,
3513 "duplicate rx packets at 2MB"),
3514 IPW2100_ORD(STAT_RX_DUPLICATE5_5,
3515 "duplicate rx packets at 5.5MB"),
3516 IPW2100_ORD(STAT_RX_DUPLICATE11,
3517 "duplicate rx packets at 11MB"),
3518 IPW2100_ORD(STAT_RX_DUPLICATE, "duplicate rx packets"),
3519 IPW2100_ORD(PERS_DB_LOCK, "locking fw permanent db"),
3520 IPW2100_ORD(PERS_DB_SIZE, "size of fw permanent db"),
3521 IPW2100_ORD(PERS_DB_ADDR, "address of fw permanent db"),
3522 IPW2100_ORD(STAT_RX_INVALID_PROTOCOL,
3523 "rx frames with invalid protocol"),
3524 IPW2100_ORD(SYS_BOOT_TIME, "Boot time"),
3525 IPW2100_ORD(STAT_RX_NO_BUFFER,
3526 "rx frames rejected due to no buffer"),
3527 IPW2100_ORD(STAT_RX_MISSING_FRAG,
3528 "rx frames dropped due to missing fragment"),
3529 IPW2100_ORD(STAT_RX_ORPHAN_FRAG,
3530 "rx frames dropped due to non-sequential fragment"),
3531 IPW2100_ORD(STAT_RX_ORPHAN_FRAME,
3532 "rx frames dropped due to unmatched 1st frame"),
3533 IPW2100_ORD(STAT_RX_FRAG_AGEOUT,
3534 "rx frames dropped due to uncompleted frame"),
3535 IPW2100_ORD(STAT_RX_ICV_ERRORS,
3536 "ICV errors during decryption"),
3537 IPW2100_ORD(STAT_PSP_SUSPENSION, "times adapter suspended"),
3538 IPW2100_ORD(STAT_PSP_BCN_TIMEOUT, "beacon timeout"),
3539 IPW2100_ORD(STAT_PSP_POLL_TIMEOUT,
3540 "poll response timeouts"),
3541 IPW2100_ORD(STAT_PSP_NONDIR_TIMEOUT,
3542 "timeouts waiting for last {broad,multi}cast pkt"),
3543 IPW2100_ORD(STAT_PSP_RX_DTIMS, "PSP DTIMs received"),
3544 IPW2100_ORD(STAT_PSP_RX_TIMS, "PSP TIMs received"),
3545 IPW2100_ORD(STAT_PSP_STATION_ID, "PSP Station ID"),
3546 IPW2100_ORD(LAST_ASSN_TIME, "RTC time of last association"),
3547 IPW2100_ORD(STAT_PERCENT_MISSED_BCNS,
3548 "current calculation of % missed beacons"),
3549 IPW2100_ORD(STAT_PERCENT_RETRIES,
3550 "current calculation of % missed tx retries"),
3551 IPW2100_ORD(ASSOCIATED_AP_PTR,
3552 "0 if not associated, else pointer to AP table entry"),
3553 IPW2100_ORD(AVAILABLE_AP_CNT,
3554 "AP's decsribed in the AP table"),
3555 IPW2100_ORD(AP_LIST_PTR, "Ptr to list of available APs"),
3556 IPW2100_ORD(STAT_AP_ASSNS, "associations"),
3557 IPW2100_ORD(STAT_ASSN_FAIL, "association failures"),
3558 IPW2100_ORD(STAT_ASSN_RESP_FAIL,
3559 "failures due to response fail"),
3560 IPW2100_ORD(STAT_FULL_SCANS, "full scans"),
3561 IPW2100_ORD(CARD_DISABLED, "Card Disabled"),
3562 IPW2100_ORD(STAT_ROAM_INHIBIT,
3563 "times roaming was inhibited due to activity"),
3564 IPW2100_ORD(RSSI_AT_ASSN,
3565 "RSSI of associated AP at time of association"),
3566 IPW2100_ORD(STAT_ASSN_CAUSE1,
3567 "reassociation: no probe response or TX on hop"),
3568 IPW2100_ORD(STAT_ASSN_CAUSE2,
3569 "reassociation: poor tx/rx quality"),
3570 IPW2100_ORD(STAT_ASSN_CAUSE3,
3571 "reassociation: tx/rx quality (excessive AP load"),
3572 IPW2100_ORD(STAT_ASSN_CAUSE4,
3573 "reassociation: AP RSSI level"),
3574 IPW2100_ORD(STAT_ASSN_CAUSE5,
3575 "reassociations due to load leveling"),
3576 IPW2100_ORD(STAT_AUTH_FAIL, "times authentication failed"),
3577 IPW2100_ORD(STAT_AUTH_RESP_FAIL,
3578 "times authentication response failed"),
3579 IPW2100_ORD(STATION_TABLE_CNT,
3580 "entries in association table"),
3581 IPW2100_ORD(RSSI_AVG_CURR, "Current avg RSSI"),
3582 IPW2100_ORD(POWER_MGMT_MODE, "Power mode - 0=CAM, 1=PSP"),
3583 IPW2100_ORD(COUNTRY_CODE,
3584 "IEEE country code as recv'd from beacon"),
3585 IPW2100_ORD(COUNTRY_CHANNELS,
3586 "channels suported by country"),
3587 IPW2100_ORD(RESET_CNT, "adapter resets (warm)"),
3588 IPW2100_ORD(BEACON_INTERVAL, "Beacon interval"),
3589 IPW2100_ORD(ANTENNA_DIVERSITY,
3590 "TRUE if antenna diversity is disabled"),
3591 IPW2100_ORD(DTIM_PERIOD, "beacon intervals between DTIMs"),
3592 IPW2100_ORD(OUR_FREQ,
3593 "current radio freq lower digits - channel ID"),
3594 IPW2100_ORD(RTC_TIME, "current RTC time"),
3595 IPW2100_ORD(PORT_TYPE, "operating mode"),
3596 IPW2100_ORD(CURRENT_TX_RATE, "current tx rate"),
3597 IPW2100_ORD(SUPPORTED_RATES, "supported tx rates"),
3598 IPW2100_ORD(ATIM_WINDOW, "current ATIM Window"),
3599 IPW2100_ORD(BASIC_RATES, "basic tx rates"),
3600 IPW2100_ORD(NIC_HIGHEST_RATE, "NIC highest tx rate"),
3601 IPW2100_ORD(AP_HIGHEST_RATE, "AP highest tx rate"),
3602 IPW2100_ORD(CAPABILITIES,
3603 "Management frame capability field"),
3604 IPW2100_ORD(AUTH_TYPE, "Type of authentication"),
3605 IPW2100_ORD(RADIO_TYPE, "Adapter card platform type"),
3606 IPW2100_ORD(RTS_THRESHOLD,
3607 "Min packet length for RTS handshaking"),
3608 IPW2100_ORD(INT_MODE, "International mode"),
3609 IPW2100_ORD(FRAGMENTATION_THRESHOLD,
3610 "protocol frag threshold"),
3611 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_START_ADDRESS,
3612 "EEPROM offset in SRAM"),
3613 IPW2100_ORD(EEPROM_SRAM_DB_BLOCK_SIZE,
3614 "EEPROM size in SRAM"),
3615 IPW2100_ORD(EEPROM_SKU_CAPABILITY, "EEPROM SKU Capability"),
3616 IPW2100_ORD(EEPROM_IBSS_11B_CHANNELS,
3617 "EEPROM IBSS 11b channel set"),
3618 IPW2100_ORD(MAC_VERSION, "MAC Version"),
3619 IPW2100_ORD(MAC_REVISION, "MAC Revision"),
3620 IPW2100_ORD(RADIO_VERSION, "Radio Version"),
3621 IPW2100_ORD(NIC_MANF_DATE_TIME, "MANF Date/Time STAMP"),
3622 IPW2100_ORD(UCODE_VERSION, "Ucode Version"),};
3624 static ssize_t show_registers(struct device *d, struct device_attribute *attr,
3628 struct ipw2100_priv *priv = dev_get_drvdata(d);
3629 struct net_device *dev = priv->net_dev;
3633 out += sprintf(out, "%30s [Address ] : Hex\n", "Register");
3635 for (i = 0; i < (sizeof(hw_data) / sizeof(*hw_data)); i++) {
3636 read_register(dev, hw_data[i].addr, &val);
3637 out += sprintf(out, "%30s [%08X] : %08X\n",
3638 hw_data[i].name, hw_data[i].addr, val);
3644 static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL);
3646 static ssize_t show_hardware(struct device *d, struct device_attribute *attr,
3649 struct ipw2100_priv *priv = dev_get_drvdata(d);
3650 struct net_device *dev = priv->net_dev;
3654 out += sprintf(out, "%30s [Address ] : Hex\n", "NIC entry");
3656 for (i = 0; i < (sizeof(nic_data) / sizeof(*nic_data)); i++) {
3661 switch (nic_data[i].size) {
3663 read_nic_byte(dev, nic_data[i].addr, &tmp8);
3664 out += sprintf(out, "%30s [%08X] : %02X\n",
3665 nic_data[i].name, nic_data[i].addr,
3669 read_nic_word(dev, nic_data[i].addr, &tmp16);
3670 out += sprintf(out, "%30s [%08X] : %04X\n",
3671 nic_data[i].name, nic_data[i].addr,
3675 read_nic_dword(dev, nic_data[i].addr, &tmp32);
3676 out += sprintf(out, "%30s [%08X] : %08X\n",
3677 nic_data[i].name, nic_data[i].addr,
3685 static DEVICE_ATTR(hardware, S_IRUGO, show_hardware, NULL);
3687 static ssize_t show_memory(struct device *d, struct device_attribute *attr,
3690 struct ipw2100_priv *priv = dev_get_drvdata(d);
3691 struct net_device *dev = priv->net_dev;
3692 static unsigned long loop = 0;
3698 if (loop >= 0x30000)
3701 /* sysfs provides us PAGE_SIZE buffer */
3702 while (len < PAGE_SIZE - 128 && loop < 0x30000) {
3704 if (priv->snapshot[0])
3705 for (i = 0; i < 4; i++)
3707 *(u32 *) SNAPSHOT_ADDR(loop + i * 4);
3709 for (i = 0; i < 4; i++)
3710 read_nic_dword(dev, loop + i * 4, &buffer[i]);
3713 len += sprintf(buf + len,
3718 ((u8 *) buffer)[0x0],
3719 ((u8 *) buffer)[0x1],
3720 ((u8 *) buffer)[0x2],
3721 ((u8 *) buffer)[0x3],
3722 ((u8 *) buffer)[0x4],
3723 ((u8 *) buffer)[0x5],
3724 ((u8 *) buffer)[0x6],
3725 ((u8 *) buffer)[0x7],
3726 ((u8 *) buffer)[0x8],
3727 ((u8 *) buffer)[0x9],
3728 ((u8 *) buffer)[0xa],
3729 ((u8 *) buffer)[0xb],
3730 ((u8 *) buffer)[0xc],
3731 ((u8 *) buffer)[0xd],
3732 ((u8 *) buffer)[0xe],
3733 ((u8 *) buffer)[0xf]);
3735 len += sprintf(buf + len, "%s\n",
3736 snprint_line(line, sizeof(line),
3737 (u8 *) buffer, 16, loop));
3744 static ssize_t store_memory(struct device *d, struct device_attribute *attr,
3745 const char *buf, size_t count)
3747 struct ipw2100_priv *priv = dev_get_drvdata(d);
3748 struct net_device *dev = priv->net_dev;
3749 const char *p = buf;
3755 (count >= 2 && tolower(p[0]) == 'o' && tolower(p[1]) == 'n')) {
3756 IPW_DEBUG_INFO("%s: Setting memory dump to RAW mode.\n",
3760 } else if (p[0] == '0' || (count >= 2 && tolower(p[0]) == 'o' &&
3761 tolower(p[1]) == 'f')) {
3762 IPW_DEBUG_INFO("%s: Setting memory dump to HEX mode.\n",
3766 } else if (tolower(p[0]) == 'r') {
3767 IPW_DEBUG_INFO("%s: Resetting firmware snapshot.\n", dev->name);
3768 ipw2100_snapshot_free(priv);
3771 IPW_DEBUG_INFO("%s: Usage: 0|on = HEX, 1|off = RAW, "
3772 "reset = clear memory snapshot\n", dev->name);
3777 static DEVICE_ATTR(memory, S_IWUSR | S_IRUGO, show_memory, store_memory);
3779 static ssize_t show_ordinals(struct device *d, struct device_attribute *attr,
3782 struct ipw2100_priv *priv = dev_get_drvdata(d);
3786 static int loop = 0;
3788 if (priv->status & STATUS_RF_KILL_MASK)
3791 if (loop >= sizeof(ord_data) / sizeof(*ord_data))
3794 /* sysfs provides us PAGE_SIZE buffer */
3795 while (len < PAGE_SIZE - 128 &&
3796 loop < (sizeof(ord_data) / sizeof(*ord_data))) {
3798 val_len = sizeof(u32);
3800 if (ipw2100_get_ordinal(priv, ord_data[loop].index, &val,
3802 len += sprintf(buf + len, "[0x%02X] = ERROR %s\n",
3803 ord_data[loop].index,
3804 ord_data[loop].desc);
3806 len += sprintf(buf + len, "[0x%02X] = 0x%08X %s\n",
3807 ord_data[loop].index, val,
3808 ord_data[loop].desc);
3815 static DEVICE_ATTR(ordinals, S_IRUGO, show_ordinals, NULL);
3817 static ssize_t show_stats(struct device *d, struct device_attribute *attr,
3820 struct ipw2100_priv *priv = dev_get_drvdata(d);
3823 out += sprintf(out, "interrupts: %d {tx: %d, rx: %d, other: %d}\n",
3824 priv->interrupts, priv->tx_interrupts,
3825 priv->rx_interrupts, priv->inta_other);
3826 out += sprintf(out, "firmware resets: %d\n", priv->resets);
3827 out += sprintf(out, "firmware hangs: %d\n", priv->hangs);
3828 #ifdef CONFIG_IPW_DEBUG
3829 out += sprintf(out, "packet mismatch image: %s\n",
3830 priv->snapshot[0] ? "YES" : "NO");
3836 static DEVICE_ATTR(stats, S_IRUGO, show_stats, NULL);
3838 static int ipw2100_switch_mode(struct ipw2100_priv *priv, u32 mode)
3842 if (mode == priv->ieee->iw_mode)
3845 err = ipw2100_disable_adapter(priv);
3847 printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
3848 priv->net_dev->name, err);
3854 priv->net_dev->type = ARPHRD_ETHER;
3857 priv->net_dev->type = ARPHRD_ETHER;
3859 #ifdef CONFIG_IPW2100_MONITOR
3860 case IW_MODE_MONITOR:
3861 priv->last_mode = priv->ieee->iw_mode;
3862 priv->net_dev->type = ARPHRD_IEEE80211;
3864 #endif /* CONFIG_IPW2100_MONITOR */
3867 priv->ieee->iw_mode = mode;
3870 /* Indicate ipw2100_download_firmware download firmware
3871 * from disk instead of memory. */
3872 ipw2100_firmware.version = 0;
3875 printk(KERN_INFO "%s: Reseting on mode change.\n", priv->net_dev->name);
3876 priv->reset_backoff = 0;
3877 schedule_reset(priv);
3882 static ssize_t show_internals(struct device *d, struct device_attribute *attr,
3885 struct ipw2100_priv *priv = dev_get_drvdata(d);
3888 #define DUMP_VAR(x,y) len += sprintf(buf + len, # x ": %" y "\n", priv-> x)
3890 if (priv->status & STATUS_ASSOCIATED)
3891 len += sprintf(buf + len, "connected: %lu\n",
3892 get_seconds() - priv->connect_start);
3894 len += sprintf(buf + len, "not connected\n");
3896 DUMP_VAR(ieee->crypt[priv->ieee->tx_keyidx], "p");
3897 DUMP_VAR(status, "08lx");
3898 DUMP_VAR(config, "08lx");
3899 DUMP_VAR(capability, "08lx");
3902 sprintf(buf + len, "last_rtc: %lu\n",
3903 (unsigned long)priv->last_rtc);
3905 DUMP_VAR(fatal_error, "d");
3906 DUMP_VAR(stop_hang_check, "d");
3907 DUMP_VAR(stop_rf_kill, "d");
3908 DUMP_VAR(messages_sent, "d");
3910 DUMP_VAR(tx_pend_stat.value, "d");
3911 DUMP_VAR(tx_pend_stat.hi, "d");
3913 DUMP_VAR(tx_free_stat.value, "d");
3914 DUMP_VAR(tx_free_stat.lo, "d");
3916 DUMP_VAR(msg_free_stat.value, "d");
3917 DUMP_VAR(msg_free_stat.lo, "d");
3919 DUMP_VAR(msg_pend_stat.value, "d");
3920 DUMP_VAR(msg_pend_stat.hi, "d");
3922 DUMP_VAR(fw_pend_stat.value, "d");
3923 DUMP_VAR(fw_pend_stat.hi, "d");
3925 DUMP_VAR(txq_stat.value, "d");
3926 DUMP_VAR(txq_stat.lo, "d");
3928 DUMP_VAR(ieee->scans, "d");
3929 DUMP_VAR(reset_backoff, "d");
3934 static DEVICE_ATTR(internals, S_IRUGO, show_internals, NULL);
3936 static ssize_t show_bssinfo(struct device *d, struct device_attribute *attr,
3939 struct ipw2100_priv *priv = dev_get_drvdata(d);
3940 char essid[IW_ESSID_MAX_SIZE + 1];
3947 if (priv->status & STATUS_RF_KILL_MASK)
3950 memset(essid, 0, sizeof(essid));
3951 memset(bssid, 0, sizeof(bssid));
3953 length = IW_ESSID_MAX_SIZE;
3954 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_SSID, essid, &length);
3956 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3959 length = sizeof(bssid);
3960 ret = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
3963 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3966 length = sizeof(u32);
3967 ret = ipw2100_get_ordinal(priv, IPW_ORD_OUR_FREQ, &chan, &length);
3969 IPW_DEBUG_INFO("failed querying ordinals at line %d\n",
3972 out += sprintf(out, "ESSID: %s\n", essid);
3973 out += sprintf(out, "BSSID: %02x:%02x:%02x:%02x:%02x:%02x\n",
3974 bssid[0], bssid[1], bssid[2],
3975 bssid[3], bssid[4], bssid[5]);
3976 out += sprintf(out, "Channel: %d\n", chan);
3981 static DEVICE_ATTR(bssinfo, S_IRUGO, show_bssinfo, NULL);
3983 #ifdef CONFIG_IPW_DEBUG
3984 static ssize_t show_debug_level(struct device_driver *d, char *buf)
3986 return sprintf(buf, "0x%08X\n", ipw2100_debug_level);
3989 static ssize_t store_debug_level(struct device_driver *d,
3990 const char *buf, size_t count)
3992 char *p = (char *)buf;
3995 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
3997 if (p[0] == 'x' || p[0] == 'X')
3999 val = simple_strtoul(p, &p, 16);
4001 val = simple_strtoul(p, &p, 10);
4003 IPW_DEBUG_INFO(": %s is not in hex or decimal form.\n", buf);
4005 ipw2100_debug_level = val;
4007 return strnlen(buf, count);
4010 static DRIVER_ATTR(debug_level, S_IWUSR | S_IRUGO, show_debug_level,
4012 #endif /* CONFIG_IPW_DEBUG */
4014 static ssize_t show_fatal_error(struct device *d,
4015 struct device_attribute *attr, char *buf)
4017 struct ipw2100_priv *priv = dev_get_drvdata(d);
4021 if (priv->fatal_error)
4022 out += sprintf(out, "0x%08X\n", priv->fatal_error);
4024 out += sprintf(out, "0\n");
4026 for (i = 1; i <= IPW2100_ERROR_QUEUE; i++) {
4027 if (!priv->fatal_errors[(priv->fatal_index - i) %
4028 IPW2100_ERROR_QUEUE])
4031 out += sprintf(out, "%d. 0x%08X\n", i,
4032 priv->fatal_errors[(priv->fatal_index - i) %
4033 IPW2100_ERROR_QUEUE]);
4039 static ssize_t store_fatal_error(struct device *d,
4040 struct device_attribute *attr, const char *buf,
4043 struct ipw2100_priv *priv = dev_get_drvdata(d);
4044 schedule_reset(priv);
4048 static DEVICE_ATTR(fatal_error, S_IWUSR | S_IRUGO, show_fatal_error,
4051 static ssize_t show_scan_age(struct device *d, struct device_attribute *attr,
4054 struct ipw2100_priv *priv = dev_get_drvdata(d);
4055 return sprintf(buf, "%d\n", priv->ieee->scan_age);
4058 static ssize_t store_scan_age(struct device *d, struct device_attribute *attr,
4059 const char *buf, size_t count)
4061 struct ipw2100_priv *priv = dev_get_drvdata(d);
4062 struct net_device *dev = priv->net_dev;
4063 char buffer[] = "00000000";
4065 (sizeof(buffer) - 1) > count ? count : sizeof(buffer) - 1;
4069 IPW_DEBUG_INFO("enter\n");
4071 strncpy(buffer, buf, len);
4074 if (p[1] == 'x' || p[1] == 'X' || p[0] == 'x' || p[0] == 'X') {
4076 if (p[0] == 'x' || p[0] == 'X')
4078 val = simple_strtoul(p, &p, 16);
4080 val = simple_strtoul(p, &p, 10);
4082 IPW_DEBUG_INFO("%s: user supplied invalid value.\n", dev->name);
4084 priv->ieee->scan_age = val;
4085 IPW_DEBUG_INFO("set scan_age = %u\n", priv->ieee->scan_age);
4088 IPW_DEBUG_INFO("exit\n");
4092 static DEVICE_ATTR(scan_age, S_IWUSR | S_IRUGO, show_scan_age, store_scan_age);
4094 static ssize_t show_rf_kill(struct device *d, struct device_attribute *attr,
4097 /* 0 - RF kill not enabled
4098 1 - SW based RF kill active (sysfs)
4099 2 - HW based RF kill active
4100 3 - Both HW and SW baed RF kill active */
4101 struct ipw2100_priv *priv = (struct ipw2100_priv *)d->driver_data;
4102 int val = ((priv->status & STATUS_RF_KILL_SW) ? 0x1 : 0x0) |
4103 (rf_kill_active(priv) ? 0x2 : 0x0);
4104 return sprintf(buf, "%i\n", val);
4107 static int ipw_radio_kill_sw(struct ipw2100_priv *priv, int disable_radio)
4109 if ((disable_radio ? 1 : 0) ==
4110 (priv->status & STATUS_RF_KILL_SW ? 1 : 0))
4113 IPW_DEBUG_RF_KILL("Manual SW RF Kill set to: RADIO %s\n",
4114 disable_radio ? "OFF" : "ON");
4116 down(&priv->action_sem);
4118 if (disable_radio) {
4119 priv->status |= STATUS_RF_KILL_SW;
4122 priv->status &= ~STATUS_RF_KILL_SW;
4123 if (rf_kill_active(priv)) {
4124 IPW_DEBUG_RF_KILL("Can not turn radio back on - "
4125 "disabled by HW switch\n");
4126 /* Make sure the RF_KILL check timer is running */
4127 priv->stop_rf_kill = 0;
4128 cancel_delayed_work(&priv->rf_kill);
4129 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
4131 schedule_reset(priv);
4134 up(&priv->action_sem);
4138 static ssize_t store_rf_kill(struct device *d, struct device_attribute *attr,
4139 const char *buf, size_t count)
4141 struct ipw2100_priv *priv = dev_get_drvdata(d);
4142 ipw_radio_kill_sw(priv, buf[0] == '1');
4146 static DEVICE_ATTR(rf_kill, S_IWUSR | S_IRUGO, show_rf_kill, store_rf_kill);
4148 static struct attribute *ipw2100_sysfs_entries[] = {
4149 &dev_attr_hardware.attr,
4150 &dev_attr_registers.attr,
4151 &dev_attr_ordinals.attr,
4153 &dev_attr_stats.attr,
4154 &dev_attr_internals.attr,
4155 &dev_attr_bssinfo.attr,
4156 &dev_attr_memory.attr,
4157 &dev_attr_scan_age.attr,
4158 &dev_attr_fatal_error.attr,
4159 &dev_attr_rf_kill.attr,
4161 &dev_attr_status.attr,
4162 &dev_attr_capability.attr,
4166 static struct attribute_group ipw2100_attribute_group = {
4167 .attrs = ipw2100_sysfs_entries,
4170 static int status_queue_allocate(struct ipw2100_priv *priv, int entries)
4172 struct ipw2100_status_queue *q = &priv->status_queue;
4174 IPW_DEBUG_INFO("enter\n");
4176 q->size = entries * sizeof(struct ipw2100_status);
4178 (struct ipw2100_status *)pci_alloc_consistent(priv->pci_dev,
4181 IPW_DEBUG_WARNING("Can not allocate status queue.\n");
4185 memset(q->drv, 0, q->size);
4187 IPW_DEBUG_INFO("exit\n");
4192 static void status_queue_free(struct ipw2100_priv *priv)
4194 IPW_DEBUG_INFO("enter\n");
4196 if (priv->status_queue.drv) {
4197 pci_free_consistent(priv->pci_dev, priv->status_queue.size,
4198 priv->status_queue.drv,
4199 priv->status_queue.nic);
4200 priv->status_queue.drv = NULL;
4203 IPW_DEBUG_INFO("exit\n");
4206 static int bd_queue_allocate(struct ipw2100_priv *priv,
4207 struct ipw2100_bd_queue *q, int entries)
4209 IPW_DEBUG_INFO("enter\n");
4211 memset(q, 0, sizeof(struct ipw2100_bd_queue));
4213 q->entries = entries;
4214 q->size = entries * sizeof(struct ipw2100_bd);
4215 q->drv = pci_alloc_consistent(priv->pci_dev, q->size, &q->nic);
4218 ("can't allocate shared memory for buffer descriptors\n");
4221 memset(q->drv, 0, q->size);
4223 IPW_DEBUG_INFO("exit\n");
4228 static void bd_queue_free(struct ipw2100_priv *priv, struct ipw2100_bd_queue *q)
4230 IPW_DEBUG_INFO("enter\n");
4236 pci_free_consistent(priv->pci_dev, q->size, q->drv, q->nic);
4240 IPW_DEBUG_INFO("exit\n");
4243 static void bd_queue_initialize(struct ipw2100_priv *priv,
4244 struct ipw2100_bd_queue *q, u32 base, u32 size,
4247 IPW_DEBUG_INFO("enter\n");
4249 IPW_DEBUG_INFO("initializing bd queue at virt=%p, phys=%08x\n", q->drv,
4252 write_register(priv->net_dev, base, q->nic);
4253 write_register(priv->net_dev, size, q->entries);
4254 write_register(priv->net_dev, r, q->oldest);
4255 write_register(priv->net_dev, w, q->next);
4257 IPW_DEBUG_INFO("exit\n");
4260 static void ipw2100_kill_workqueue(struct ipw2100_priv *priv)
4262 if (priv->workqueue) {
4263 priv->stop_rf_kill = 1;
4264 priv->stop_hang_check = 1;
4265 cancel_delayed_work(&priv->reset_work);
4266 cancel_delayed_work(&priv->security_work);
4267 cancel_delayed_work(&priv->wx_event_work);
4268 cancel_delayed_work(&priv->hang_check);
4269 cancel_delayed_work(&priv->rf_kill);
4270 destroy_workqueue(priv->workqueue);
4271 priv->workqueue = NULL;
4275 static int ipw2100_tx_allocate(struct ipw2100_priv *priv)
4277 int i, j, err = -EINVAL;
4281 IPW_DEBUG_INFO("enter\n");
4283 err = bd_queue_allocate(priv, &priv->tx_queue, TX_QUEUE_LENGTH);
4285 IPW_DEBUG_ERROR("%s: failed bd_queue_allocate\n",
4286 priv->net_dev->name);
4291 (struct ipw2100_tx_packet *)kmalloc(TX_PENDED_QUEUE_LENGTH *
4295 if (!priv->tx_buffers) {
4296 printk(KERN_ERR DRV_NAME
4297 ": %s: alloc failed form tx buffers.\n",
4298 priv->net_dev->name);
4299 bd_queue_free(priv, &priv->tx_queue);
4303 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4304 v = pci_alloc_consistent(priv->pci_dev,
4305 sizeof(struct ipw2100_data_header),
4308 printk(KERN_ERR DRV_NAME
4309 ": %s: PCI alloc failed for tx " "buffers.\n",
4310 priv->net_dev->name);
4315 priv->tx_buffers[i].type = DATA;
4316 priv->tx_buffers[i].info.d_struct.data =
4317 (struct ipw2100_data_header *)v;
4318 priv->tx_buffers[i].info.d_struct.data_phys = p;
4319 priv->tx_buffers[i].info.d_struct.txb = NULL;
4322 if (i == TX_PENDED_QUEUE_LENGTH)
4325 for (j = 0; j < i; j++) {
4326 pci_free_consistent(priv->pci_dev,
4327 sizeof(struct ipw2100_data_header),
4328 priv->tx_buffers[j].info.d_struct.data,
4329 priv->tx_buffers[j].info.d_struct.
4333 kfree(priv->tx_buffers);
4334 priv->tx_buffers = NULL;
4339 static void ipw2100_tx_initialize(struct ipw2100_priv *priv)
4343 IPW_DEBUG_INFO("enter\n");
4346 * reinitialize packet info lists
4348 INIT_LIST_HEAD(&priv->fw_pend_list);
4349 INIT_STAT(&priv->fw_pend_stat);
4352 * reinitialize lists
4354 INIT_LIST_HEAD(&priv->tx_pend_list);
4355 INIT_LIST_HEAD(&priv->tx_free_list);
4356 INIT_STAT(&priv->tx_pend_stat);
4357 INIT_STAT(&priv->tx_free_stat);
4359 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4360 /* We simply drop any SKBs that have been queued for
4362 if (priv->tx_buffers[i].info.d_struct.txb) {
4363 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
4365 priv->tx_buffers[i].info.d_struct.txb = NULL;
4368 list_add_tail(&priv->tx_buffers[i].list, &priv->tx_free_list);
4371 SET_STAT(&priv->tx_free_stat, i);
4373 priv->tx_queue.oldest = 0;
4374 priv->tx_queue.available = priv->tx_queue.entries;
4375 priv->tx_queue.next = 0;
4376 INIT_STAT(&priv->txq_stat);
4377 SET_STAT(&priv->txq_stat, priv->tx_queue.available);
4379 bd_queue_initialize(priv, &priv->tx_queue,
4380 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_BASE,
4381 IPW_MEM_HOST_SHARED_TX_QUEUE_BD_SIZE,
4382 IPW_MEM_HOST_SHARED_TX_QUEUE_READ_INDEX,
4383 IPW_MEM_HOST_SHARED_TX_QUEUE_WRITE_INDEX);
4385 IPW_DEBUG_INFO("exit\n");
4389 static void ipw2100_tx_free(struct ipw2100_priv *priv)
4393 IPW_DEBUG_INFO("enter\n");
4395 bd_queue_free(priv, &priv->tx_queue);
4397 if (!priv->tx_buffers)
4400 for (i = 0; i < TX_PENDED_QUEUE_LENGTH; i++) {
4401 if (priv->tx_buffers[i].info.d_struct.txb) {
4402 ieee80211_txb_free(priv->tx_buffers[i].info.d_struct.
4404 priv->tx_buffers[i].info.d_struct.txb = NULL;
4406 if (priv->tx_buffers[i].info.d_struct.data)
4407 pci_free_consistent(priv->pci_dev,
4408 sizeof(struct ipw2100_data_header),
4409 priv->tx_buffers[i].info.d_struct.
4411 priv->tx_buffers[i].info.d_struct.
4415 kfree(priv->tx_buffers);
4416 priv->tx_buffers = NULL;
4418 IPW_DEBUG_INFO("exit\n");
4421 static int ipw2100_rx_allocate(struct ipw2100_priv *priv)
4423 int i, j, err = -EINVAL;
4425 IPW_DEBUG_INFO("enter\n");
4427 err = bd_queue_allocate(priv, &priv->rx_queue, RX_QUEUE_LENGTH);
4429 IPW_DEBUG_INFO("failed bd_queue_allocate\n");
4433 err = status_queue_allocate(priv, RX_QUEUE_LENGTH);
4435 IPW_DEBUG_INFO("failed status_queue_allocate\n");
4436 bd_queue_free(priv, &priv->rx_queue);
4443 priv->rx_buffers = (struct ipw2100_rx_packet *)
4444 kmalloc(RX_QUEUE_LENGTH * sizeof(struct ipw2100_rx_packet),
4446 if (!priv->rx_buffers) {
4447 IPW_DEBUG_INFO("can't allocate rx packet buffer table\n");
4449 bd_queue_free(priv, &priv->rx_queue);
4451 status_queue_free(priv);
4456 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4457 struct ipw2100_rx_packet *packet = &priv->rx_buffers[i];
4459 err = ipw2100_alloc_skb(priv, packet);
4460 if (unlikely(err)) {
4465 /* The BD holds the cache aligned address */
4466 priv->rx_queue.drv[i].host_addr = packet->dma_addr;
4467 priv->rx_queue.drv[i].buf_length = IPW_RX_NIC_BUFFER_LENGTH;
4468 priv->status_queue.drv[i].status_fields = 0;
4471 if (i == RX_QUEUE_LENGTH)
4474 for (j = 0; j < i; j++) {
4475 pci_unmap_single(priv->pci_dev, priv->rx_buffers[j].dma_addr,
4476 sizeof(struct ipw2100_rx_packet),
4477 PCI_DMA_FROMDEVICE);
4478 dev_kfree_skb(priv->rx_buffers[j].skb);
4481 kfree(priv->rx_buffers);
4482 priv->rx_buffers = NULL;
4484 bd_queue_free(priv, &priv->rx_queue);
4486 status_queue_free(priv);
4491 static void ipw2100_rx_initialize(struct ipw2100_priv *priv)
4493 IPW_DEBUG_INFO("enter\n");
4495 priv->rx_queue.oldest = 0;
4496 priv->rx_queue.available = priv->rx_queue.entries - 1;
4497 priv->rx_queue.next = priv->rx_queue.entries - 1;
4499 INIT_STAT(&priv->rxq_stat);
4500 SET_STAT(&priv->rxq_stat, priv->rx_queue.available);
4502 bd_queue_initialize(priv, &priv->rx_queue,
4503 IPW_MEM_HOST_SHARED_RX_BD_BASE,
4504 IPW_MEM_HOST_SHARED_RX_BD_SIZE,
4505 IPW_MEM_HOST_SHARED_RX_READ_INDEX,
4506 IPW_MEM_HOST_SHARED_RX_WRITE_INDEX);
4508 /* set up the status queue */
4509 write_register(priv->net_dev, IPW_MEM_HOST_SHARED_RX_STATUS_BASE,
4510 priv->status_queue.nic);
4512 IPW_DEBUG_INFO("exit\n");
4515 static void ipw2100_rx_free(struct ipw2100_priv *priv)
4519 IPW_DEBUG_INFO("enter\n");
4521 bd_queue_free(priv, &priv->rx_queue);
4522 status_queue_free(priv);
4524 if (!priv->rx_buffers)
4527 for (i = 0; i < RX_QUEUE_LENGTH; i++) {
4528 if (priv->rx_buffers[i].rxp) {
4529 pci_unmap_single(priv->pci_dev,
4530 priv->rx_buffers[i].dma_addr,
4531 sizeof(struct ipw2100_rx),
4532 PCI_DMA_FROMDEVICE);
4533 dev_kfree_skb(priv->rx_buffers[i].skb);
4537 kfree(priv->rx_buffers);
4538 priv->rx_buffers = NULL;
4540 IPW_DEBUG_INFO("exit\n");
4543 static int ipw2100_read_mac_address(struct ipw2100_priv *priv)
4545 u32 length = ETH_ALEN;
4550 err = ipw2100_get_ordinal(priv, IPW_ORD_STAT_ADAPTER_MAC, mac, &length);
4552 IPW_DEBUG_INFO("MAC address read failed\n");
4555 IPW_DEBUG_INFO("card MAC is %02X:%02X:%02X:%02X:%02X:%02X\n",
4556 mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
4558 memcpy(priv->net_dev->dev_addr, mac, ETH_ALEN);
4563 /********************************************************************
4567 ********************************************************************/
4569 static int ipw2100_set_mac_address(struct ipw2100_priv *priv, int batch_mode)
4571 struct host_command cmd = {
4572 .host_command = ADAPTER_ADDRESS,
4573 .host_command_sequence = 0,
4574 .host_command_length = ETH_ALEN
4578 IPW_DEBUG_HC("SET_MAC_ADDRESS\n");
4580 IPW_DEBUG_INFO("enter\n");
4582 if (priv->config & CFG_CUSTOM_MAC) {
4583 memcpy(cmd.host_command_parameters, priv->mac_addr, ETH_ALEN);
4584 memcpy(priv->net_dev->dev_addr, priv->mac_addr, ETH_ALEN);
4586 memcpy(cmd.host_command_parameters, priv->net_dev->dev_addr,
4589 err = ipw2100_hw_send_command(priv, &cmd);
4591 IPW_DEBUG_INFO("exit\n");
4595 static int ipw2100_set_port_type(struct ipw2100_priv *priv, u32 port_type,
4598 struct host_command cmd = {
4599 .host_command = PORT_TYPE,
4600 .host_command_sequence = 0,
4601 .host_command_length = sizeof(u32)
4605 switch (port_type) {
4607 cmd.host_command_parameters[0] = IPW_BSS;
4610 cmd.host_command_parameters[0] = IPW_IBSS;
4614 IPW_DEBUG_HC("PORT_TYPE: %s\n",
4615 port_type == IPW_IBSS ? "Ad-Hoc" : "Managed");
4618 err = ipw2100_disable_adapter(priv);
4620 printk(KERN_ERR DRV_NAME
4621 ": %s: Could not disable adapter %d\n",
4622 priv->net_dev->name, err);
4627 /* send cmd to firmware */
4628 err = ipw2100_hw_send_command(priv, &cmd);
4631 ipw2100_enable_adapter(priv);
4636 static int ipw2100_set_channel(struct ipw2100_priv *priv, u32 channel,
4639 struct host_command cmd = {
4640 .host_command = CHANNEL,
4641 .host_command_sequence = 0,
4642 .host_command_length = sizeof(u32)
4646 cmd.host_command_parameters[0] = channel;
4648 IPW_DEBUG_HC("CHANNEL: %d\n", channel);
4650 /* If BSS then we don't support channel selection */
4651 if (priv->ieee->iw_mode == IW_MODE_INFRA)
4654 if ((channel != 0) &&
4655 ((channel < REG_MIN_CHANNEL) || (channel > REG_MAX_CHANNEL)))
4659 err = ipw2100_disable_adapter(priv);
4664 err = ipw2100_hw_send_command(priv, &cmd);
4666 IPW_DEBUG_INFO("Failed to set channel to %d", channel);
4671 priv->config |= CFG_STATIC_CHANNEL;
4673 priv->config &= ~CFG_STATIC_CHANNEL;
4675 priv->channel = channel;
4678 err = ipw2100_enable_adapter(priv);
4686 static int ipw2100_system_config(struct ipw2100_priv *priv, int batch_mode)
4688 struct host_command cmd = {
4689 .host_command = SYSTEM_CONFIG,
4690 .host_command_sequence = 0,
4691 .host_command_length = 12,
4693 u32 ibss_mask, len = sizeof(u32);
4696 /* Set system configuration */
4699 err = ipw2100_disable_adapter(priv);
4704 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
4705 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_AUTO_START;
4707 cmd.host_command_parameters[0] |= IPW_CFG_IBSS_MASK |
4708 IPW_CFG_BSS_MASK | IPW_CFG_802_1x_ENABLE;
4710 if (!(priv->config & CFG_LONG_PREAMBLE))
4711 cmd.host_command_parameters[0] |= IPW_CFG_PREAMBLE_AUTO;
4713 err = ipw2100_get_ordinal(priv,
4714 IPW_ORD_EEPROM_IBSS_11B_CHANNELS,
4717 ibss_mask = IPW_IBSS_11B_DEFAULT_MASK;
4719 cmd.host_command_parameters[1] = REG_CHANNEL_MASK;
4720 cmd.host_command_parameters[2] = REG_CHANNEL_MASK & ibss_mask;
4723 /*cmd.host_command_parameters[0] |= DIVERSITY_ANTENNA_A; */
4725 err = ipw2100_hw_send_command(priv, &cmd);
4729 /* If IPv6 is configured in the kernel then we don't want to filter out all
4730 * of the multicast packets as IPv6 needs some. */
4731 #if !defined(CONFIG_IPV6) && !defined(CONFIG_IPV6_MODULE)
4732 cmd.host_command = ADD_MULTICAST;
4733 cmd.host_command_sequence = 0;
4734 cmd.host_command_length = 0;
4736 ipw2100_hw_send_command(priv, &cmd);
4739 err = ipw2100_enable_adapter(priv);
4747 static int ipw2100_set_tx_rates(struct ipw2100_priv *priv, u32 rate,
4750 struct host_command cmd = {
4751 .host_command = BASIC_TX_RATES,
4752 .host_command_sequence = 0,
4753 .host_command_length = 4
4757 cmd.host_command_parameters[0] = rate & TX_RATE_MASK;
4760 err = ipw2100_disable_adapter(priv);
4765 /* Set BASIC TX Rate first */
4766 ipw2100_hw_send_command(priv, &cmd);
4769 cmd.host_command = TX_RATES;
4770 ipw2100_hw_send_command(priv, &cmd);
4772 /* Set MSDU TX Rate */
4773 cmd.host_command = MSDU_TX_RATES;
4774 ipw2100_hw_send_command(priv, &cmd);
4777 err = ipw2100_enable_adapter(priv);
4782 priv->tx_rates = rate;
4787 static int ipw2100_set_power_mode(struct ipw2100_priv *priv, int power_level)
4789 struct host_command cmd = {
4790 .host_command = POWER_MODE,
4791 .host_command_sequence = 0,
4792 .host_command_length = 4
4796 cmd.host_command_parameters[0] = power_level;
4798 err = ipw2100_hw_send_command(priv, &cmd);
4802 if (power_level == IPW_POWER_MODE_CAM)
4803 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
4805 priv->power_mode = IPW_POWER_ENABLED | power_level;
4807 #ifdef CONFIG_IPW2100_TX_POWER
4808 if (priv->port_type == IBSS && priv->adhoc_power != DFTL_IBSS_TX_POWER) {
4809 /* Set beacon interval */
4810 cmd.host_command = TX_POWER_INDEX;
4811 cmd.host_command_parameters[0] = (u32) priv->adhoc_power;
4813 err = ipw2100_hw_send_command(priv, &cmd);
4822 static int ipw2100_set_rts_threshold(struct ipw2100_priv *priv, u32 threshold)
4824 struct host_command cmd = {
4825 .host_command = RTS_THRESHOLD,
4826 .host_command_sequence = 0,
4827 .host_command_length = 4
4831 if (threshold & RTS_DISABLED)
4832 cmd.host_command_parameters[0] = MAX_RTS_THRESHOLD;
4834 cmd.host_command_parameters[0] = threshold & ~RTS_DISABLED;
4836 err = ipw2100_hw_send_command(priv, &cmd);
4840 priv->rts_threshold = threshold;
4846 int ipw2100_set_fragmentation_threshold(struct ipw2100_priv *priv,
4847 u32 threshold, int batch_mode)
4849 struct host_command cmd = {
4850 .host_command = FRAG_THRESHOLD,
4851 .host_command_sequence = 0,
4852 .host_command_length = 4,
4853 .host_command_parameters[0] = 0,
4858 err = ipw2100_disable_adapter(priv);
4864 threshold = DEFAULT_FRAG_THRESHOLD;
4866 threshold = max(threshold, MIN_FRAG_THRESHOLD);
4867 threshold = min(threshold, MAX_FRAG_THRESHOLD);
4870 cmd.host_command_parameters[0] = threshold;
4872 IPW_DEBUG_HC("FRAG_THRESHOLD: %u\n", threshold);
4874 err = ipw2100_hw_send_command(priv, &cmd);
4877 ipw2100_enable_adapter(priv);
4880 priv->frag_threshold = threshold;
4886 static int ipw2100_set_short_retry(struct ipw2100_priv *priv, u32 retry)
4888 struct host_command cmd = {
4889 .host_command = SHORT_RETRY_LIMIT,
4890 .host_command_sequence = 0,
4891 .host_command_length = 4
4895 cmd.host_command_parameters[0] = retry;
4897 err = ipw2100_hw_send_command(priv, &cmd);
4901 priv->short_retry_limit = retry;
4906 static int ipw2100_set_long_retry(struct ipw2100_priv *priv, u32 retry)
4908 struct host_command cmd = {
4909 .host_command = LONG_RETRY_LIMIT,
4910 .host_command_sequence = 0,
4911 .host_command_length = 4
4915 cmd.host_command_parameters[0] = retry;
4917 err = ipw2100_hw_send_command(priv, &cmd);
4921 priv->long_retry_limit = retry;
4926 static int ipw2100_set_mandatory_bssid(struct ipw2100_priv *priv, u8 * bssid,
4929 struct host_command cmd = {
4930 .host_command = MANDATORY_BSSID,
4931 .host_command_sequence = 0,
4932 .host_command_length = (bssid == NULL) ? 0 : ETH_ALEN
4936 #ifdef CONFIG_IPW_DEBUG
4938 IPW_DEBUG_HC("MANDATORY_BSSID: %02X:%02X:%02X:%02X:%02X:%02X\n",
4939 bssid[0], bssid[1], bssid[2], bssid[3], bssid[4],
4942 IPW_DEBUG_HC("MANDATORY_BSSID: <clear>\n");
4944 /* if BSSID is empty then we disable mandatory bssid mode */
4946 memcpy(cmd.host_command_parameters, bssid, ETH_ALEN);
4949 err = ipw2100_disable_adapter(priv);
4954 err = ipw2100_hw_send_command(priv, &cmd);
4957 ipw2100_enable_adapter(priv);
4962 static int ipw2100_disassociate_bssid(struct ipw2100_priv *priv)
4964 struct host_command cmd = {
4965 .host_command = DISASSOCIATION_BSSID,
4966 .host_command_sequence = 0,
4967 .host_command_length = ETH_ALEN
4972 IPW_DEBUG_HC("DISASSOCIATION_BSSID\n");
4975 /* The Firmware currently ignores the BSSID and just disassociates from
4976 * the currently associated AP -- but in the off chance that a future
4977 * firmware does use the BSSID provided here, we go ahead and try and
4978 * set it to the currently associated AP's BSSID */
4979 memcpy(cmd.host_command_parameters, priv->bssid, ETH_ALEN);
4981 err = ipw2100_hw_send_command(priv, &cmd);
4986 static int ipw2100_set_wpa_ie(struct ipw2100_priv *,
4987 struct ipw2100_wpa_assoc_frame *, int)
4988 __attribute__ ((unused));
4990 static int ipw2100_set_wpa_ie(struct ipw2100_priv *priv,
4991 struct ipw2100_wpa_assoc_frame *wpa_frame,
4994 struct host_command cmd = {
4995 .host_command = SET_WPA_IE,
4996 .host_command_sequence = 0,
4997 .host_command_length = sizeof(struct ipw2100_wpa_assoc_frame),
5001 IPW_DEBUG_HC("SET_WPA_IE\n");
5004 err = ipw2100_disable_adapter(priv);
5009 memcpy(cmd.host_command_parameters, wpa_frame,
5010 sizeof(struct ipw2100_wpa_assoc_frame));
5012 err = ipw2100_hw_send_command(priv, &cmd);
5015 if (ipw2100_enable_adapter(priv))
5022 struct security_info_params {
5023 u32 allowed_ciphers;
5026 u8 replay_counters_number;
5027 u8 unicast_using_group;
5028 } __attribute__ ((packed));
5030 static int ipw2100_set_security_information(struct ipw2100_priv *priv,
5033 int unicast_using_group,
5036 struct host_command cmd = {
5037 .host_command = SET_SECURITY_INFORMATION,
5038 .host_command_sequence = 0,
5039 .host_command_length = sizeof(struct security_info_params)
5041 struct security_info_params *security =
5042 (struct security_info_params *)&cmd.host_command_parameters;
5044 memset(security, 0, sizeof(*security));
5046 /* If shared key AP authentication is turned on, then we need to
5047 * configure the firmware to try and use it.
5049 * Actual data encryption/decryption is handled by the host. */
5050 security->auth_mode = auth_mode;
5051 security->unicast_using_group = unicast_using_group;
5053 switch (security_level) {
5056 security->allowed_ciphers = IPW_NONE_CIPHER;
5059 security->allowed_ciphers = IPW_WEP40_CIPHER |
5063 security->allowed_ciphers = IPW_WEP40_CIPHER |
5064 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER;
5066 case SEC_LEVEL_2_CKIP:
5067 security->allowed_ciphers = IPW_WEP40_CIPHER |
5068 IPW_WEP104_CIPHER | IPW_CKIP_CIPHER;
5071 security->allowed_ciphers = IPW_WEP40_CIPHER |
5072 IPW_WEP104_CIPHER | IPW_TKIP_CIPHER | IPW_CCMP_CIPHER;
5077 ("SET_SECURITY_INFORMATION: auth:%d cipher:0x%02X (level %d)\n",
5078 security->auth_mode, security->allowed_ciphers, security_level);
5080 security->replay_counters_number = 0;
5083 err = ipw2100_disable_adapter(priv);
5088 err = ipw2100_hw_send_command(priv, &cmd);
5091 ipw2100_enable_adapter(priv);
5096 static int ipw2100_set_tx_power(struct ipw2100_priv *priv, u32 tx_power)
5098 struct host_command cmd = {
5099 .host_command = TX_POWER_INDEX,
5100 .host_command_sequence = 0,
5101 .host_command_length = 4
5105 if (tx_power != IPW_TX_POWER_DEFAULT)
5106 tx_power = (tx_power - IPW_TX_POWER_MIN_DBM) * 16 /
5107 (IPW_TX_POWER_MAX_DBM - IPW_TX_POWER_MIN_DBM);
5109 cmd.host_command_parameters[0] = tx_power;
5111 if (priv->ieee->iw_mode == IW_MODE_ADHOC)
5112 err = ipw2100_hw_send_command(priv, &cmd);
5114 priv->tx_power = tx_power;
5119 static int ipw2100_set_ibss_beacon_interval(struct ipw2100_priv *priv,
5120 u32 interval, int batch_mode)
5122 struct host_command cmd = {
5123 .host_command = BEACON_INTERVAL,
5124 .host_command_sequence = 0,
5125 .host_command_length = 4
5129 cmd.host_command_parameters[0] = interval;
5131 IPW_DEBUG_INFO("enter\n");
5133 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5135 err = ipw2100_disable_adapter(priv);
5140 ipw2100_hw_send_command(priv, &cmd);
5143 err = ipw2100_enable_adapter(priv);
5149 IPW_DEBUG_INFO("exit\n");
5154 void ipw2100_queues_initialize(struct ipw2100_priv *priv)
5156 ipw2100_tx_initialize(priv);
5157 ipw2100_rx_initialize(priv);
5158 ipw2100_msg_initialize(priv);
5161 void ipw2100_queues_free(struct ipw2100_priv *priv)
5163 ipw2100_tx_free(priv);
5164 ipw2100_rx_free(priv);
5165 ipw2100_msg_free(priv);
5168 int ipw2100_queues_allocate(struct ipw2100_priv *priv)
5170 if (ipw2100_tx_allocate(priv) ||
5171 ipw2100_rx_allocate(priv) || ipw2100_msg_allocate(priv))
5177 ipw2100_tx_free(priv);
5178 ipw2100_rx_free(priv);
5179 ipw2100_msg_free(priv);
5183 #define IPW_PRIVACY_CAPABLE 0x0008
5185 static int ipw2100_set_wep_flags(struct ipw2100_priv *priv, u32 flags,
5188 struct host_command cmd = {
5189 .host_command = WEP_FLAGS,
5190 .host_command_sequence = 0,
5191 .host_command_length = 4
5195 cmd.host_command_parameters[0] = flags;
5197 IPW_DEBUG_HC("WEP_FLAGS: flags = 0x%08X\n", flags);
5200 err = ipw2100_disable_adapter(priv);
5202 printk(KERN_ERR DRV_NAME
5203 ": %s: Could not disable adapter %d\n",
5204 priv->net_dev->name, err);
5209 /* send cmd to firmware */
5210 err = ipw2100_hw_send_command(priv, &cmd);
5213 ipw2100_enable_adapter(priv);
5218 struct ipw2100_wep_key {
5224 /* Macros to ease up priting WEP keys */
5225 #define WEP_FMT_64 "%02X%02X%02X%02X-%02X"
5226 #define WEP_FMT_128 "%02X%02X%02X%02X-%02X%02X%02X%02X-%02X%02X%02X"
5227 #define WEP_STR_64(x) x[0],x[1],x[2],x[3],x[4]
5228 #define WEP_STR_128(x) x[0],x[1],x[2],x[3],x[4],x[5],x[6],x[7],x[8],x[9],x[10]
5233 * @priv: struct to work on
5234 * @idx: index of the key we want to set
5235 * @key: ptr to the key data to set
5236 * @len: length of the buffer at @key
5237 * @batch_mode: FIXME perform the operation in batch mode, not
5238 * disabling the device.
5240 * @returns 0 if OK, < 0 errno code on error.
5242 * Fill out a command structure with the new wep key, length an
5243 * index and send it down the wire.
5245 static int ipw2100_set_key(struct ipw2100_priv *priv,
5246 int idx, char *key, int len, int batch_mode)
5248 int keylen = len ? (len <= 5 ? 5 : 13) : 0;
5249 struct host_command cmd = {
5250 .host_command = WEP_KEY_INFO,
5251 .host_command_sequence = 0,
5252 .host_command_length = sizeof(struct ipw2100_wep_key),
5254 struct ipw2100_wep_key *wep_key = (void *)cmd.host_command_parameters;
5257 IPW_DEBUG_HC("WEP_KEY_INFO: index = %d, len = %d/%d\n",
5260 /* NOTE: We don't check cached values in case the firmware was reset
5261 * or some other problem is occuring. If the user is setting the key,
5262 * then we push the change */
5265 wep_key->len = keylen;
5268 memcpy(wep_key->key, key, len);
5269 memset(wep_key->key + len, 0, keylen - len);
5272 /* Will be optimized out on debug not being configured in */
5274 IPW_DEBUG_WEP("%s: Clearing key %d\n",
5275 priv->net_dev->name, wep_key->idx);
5276 else if (keylen == 5)
5277 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_64 "\n",
5278 priv->net_dev->name, wep_key->idx, wep_key->len,
5279 WEP_STR_64(wep_key->key));
5281 IPW_DEBUG_WEP("%s: idx: %d, len: %d key: " WEP_FMT_128
5283 priv->net_dev->name, wep_key->idx, wep_key->len,
5284 WEP_STR_128(wep_key->key));
5287 err = ipw2100_disable_adapter(priv);
5288 /* FIXME: IPG: shouldn't this prink be in _disable_adapter()? */
5290 printk(KERN_ERR DRV_NAME
5291 ": %s: Could not disable adapter %d\n",
5292 priv->net_dev->name, err);
5297 /* send cmd to firmware */
5298 err = ipw2100_hw_send_command(priv, &cmd);
5301 int err2 = ipw2100_enable_adapter(priv);
5308 static int ipw2100_set_key_index(struct ipw2100_priv *priv,
5309 int idx, int batch_mode)
5311 struct host_command cmd = {
5312 .host_command = WEP_KEY_INDEX,
5313 .host_command_sequence = 0,
5314 .host_command_length = 4,
5315 .host_command_parameters = {idx},
5319 IPW_DEBUG_HC("WEP_KEY_INDEX: index = %d\n", idx);
5321 if (idx < 0 || idx > 3)
5325 err = ipw2100_disable_adapter(priv);
5327 printk(KERN_ERR DRV_NAME
5328 ": %s: Could not disable adapter %d\n",
5329 priv->net_dev->name, err);
5334 /* send cmd to firmware */
5335 err = ipw2100_hw_send_command(priv, &cmd);
5338 ipw2100_enable_adapter(priv);
5343 static int ipw2100_configure_security(struct ipw2100_priv *priv, int batch_mode)
5345 int i, err, auth_mode, sec_level, use_group;
5347 if (!(priv->status & STATUS_RUNNING))
5351 err = ipw2100_disable_adapter(priv);
5356 if (!priv->ieee->sec.enabled) {
5358 ipw2100_set_security_information(priv, IPW_AUTH_OPEN,
5361 auth_mode = IPW_AUTH_OPEN;
5362 if ((priv->ieee->sec.flags & SEC_AUTH_MODE) &&
5363 (priv->ieee->sec.auth_mode == WLAN_AUTH_SHARED_KEY))
5364 auth_mode = IPW_AUTH_SHARED;
5366 sec_level = SEC_LEVEL_0;
5367 if (priv->ieee->sec.flags & SEC_LEVEL)
5368 sec_level = priv->ieee->sec.level;
5371 if (priv->ieee->sec.flags & SEC_UNICAST_GROUP)
5372 use_group = priv->ieee->sec.unicast_uses_group;
5375 ipw2100_set_security_information(priv, auth_mode, sec_level,
5382 if (priv->ieee->sec.enabled) {
5383 for (i = 0; i < 4; i++) {
5384 if (!(priv->ieee->sec.flags & (1 << i))) {
5385 memset(priv->ieee->sec.keys[i], 0, WEP_KEY_LEN);
5386 priv->ieee->sec.key_sizes[i] = 0;
5388 err = ipw2100_set_key(priv, i,
5389 priv->ieee->sec.keys[i],
5397 ipw2100_set_key_index(priv, priv->ieee->tx_keyidx, 1);
5400 /* Always enable privacy so the Host can filter WEP packets if
5401 * encrypted data is sent up */
5403 ipw2100_set_wep_flags(priv,
5405 enabled ? IPW_PRIVACY_CAPABLE : 0, 1);
5409 priv->status &= ~STATUS_SECURITY_UPDATED;
5413 ipw2100_enable_adapter(priv);
5418 static void ipw2100_security_work(struct ipw2100_priv *priv)
5420 /* If we happen to have reconnected before we get a chance to
5421 * process this, then update the security settings--which causes
5422 * a disassociation to occur */
5423 if (!(priv->status & STATUS_ASSOCIATED) &&
5424 priv->status & STATUS_SECURITY_UPDATED)
5425 ipw2100_configure_security(priv, 0);
5428 static void shim__set_security(struct net_device *dev,
5429 struct ieee80211_security *sec)
5431 struct ipw2100_priv *priv = ieee80211_priv(dev);
5432 int i, force_update = 0;
5434 down(&priv->action_sem);
5435 if (!(priv->status & STATUS_INITIALIZED))
5438 for (i = 0; i < 4; i++) {
5439 if (sec->flags & (1 << i)) {
5440 priv->ieee->sec.key_sizes[i] = sec->key_sizes[i];
5441 if (sec->key_sizes[i] == 0)
5442 priv->ieee->sec.flags &= ~(1 << i);
5444 memcpy(priv->ieee->sec.keys[i], sec->keys[i],
5446 priv->ieee->sec.flags |= (1 << i);
5447 priv->status |= STATUS_SECURITY_UPDATED;
5451 if ((sec->flags & SEC_ACTIVE_KEY) &&
5452 priv->ieee->sec.active_key != sec->active_key) {
5453 if (sec->active_key <= 3) {
5454 priv->ieee->sec.active_key = sec->active_key;
5455 priv->ieee->sec.flags |= SEC_ACTIVE_KEY;
5457 priv->ieee->sec.flags &= ~SEC_ACTIVE_KEY;
5459 priv->status |= STATUS_SECURITY_UPDATED;
5462 if ((sec->flags & SEC_AUTH_MODE) &&
5463 (priv->ieee->sec.auth_mode != sec->auth_mode)) {
5464 priv->ieee->sec.auth_mode = sec->auth_mode;
5465 priv->ieee->sec.flags |= SEC_AUTH_MODE;
5466 priv->status |= STATUS_SECURITY_UPDATED;
5469 if (sec->flags & SEC_ENABLED && priv->ieee->sec.enabled != sec->enabled) {
5470 priv->ieee->sec.flags |= SEC_ENABLED;
5471 priv->ieee->sec.enabled = sec->enabled;
5472 priv->status |= STATUS_SECURITY_UPDATED;
5476 if (sec->flags & SEC_ENCRYPT)
5477 priv->ieee->sec.encrypt = sec->encrypt;
5479 if (sec->flags & SEC_LEVEL && priv->ieee->sec.level != sec->level) {
5480 priv->ieee->sec.level = sec->level;
5481 priv->ieee->sec.flags |= SEC_LEVEL;
5482 priv->status |= STATUS_SECURITY_UPDATED;
5485 IPW_DEBUG_WEP("Security flags: %c %c%c%c%c %c%c%c%c\n",
5486 priv->ieee->sec.flags & (1 << 8) ? '1' : '0',
5487 priv->ieee->sec.flags & (1 << 7) ? '1' : '0',
5488 priv->ieee->sec.flags & (1 << 6) ? '1' : '0',
5489 priv->ieee->sec.flags & (1 << 5) ? '1' : '0',
5490 priv->ieee->sec.flags & (1 << 4) ? '1' : '0',
5491 priv->ieee->sec.flags & (1 << 3) ? '1' : '0',
5492 priv->ieee->sec.flags & (1 << 2) ? '1' : '0',
5493 priv->ieee->sec.flags & (1 << 1) ? '1' : '0',
5494 priv->ieee->sec.flags & (1 << 0) ? '1' : '0');
5496 /* As a temporary work around to enable WPA until we figure out why
5497 * wpa_supplicant toggles the security capability of the driver, which
5498 * forces a disassocation with force_update...
5500 * if (force_update || !(priv->status & STATUS_ASSOCIATED))*/
5501 if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING)))
5502 ipw2100_configure_security(priv, 0);
5504 up(&priv->action_sem);
5507 static int ipw2100_adapter_setup(struct ipw2100_priv *priv)
5513 IPW_DEBUG_INFO("enter\n");
5515 err = ipw2100_disable_adapter(priv);
5518 #ifdef CONFIG_IPW2100_MONITOR
5519 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
5520 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5524 IPW_DEBUG_INFO("exit\n");
5528 #endif /* CONFIG_IPW2100_MONITOR */
5530 err = ipw2100_read_mac_address(priv);
5534 err = ipw2100_set_mac_address(priv, batch_mode);
5538 err = ipw2100_set_port_type(priv, priv->ieee->iw_mode, batch_mode);
5542 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5543 err = ipw2100_set_channel(priv, priv->channel, batch_mode);
5548 err = ipw2100_system_config(priv, batch_mode);
5552 err = ipw2100_set_tx_rates(priv, priv->tx_rates, batch_mode);
5556 /* Default to power mode OFF */
5557 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
5561 err = ipw2100_set_rts_threshold(priv, priv->rts_threshold);
5565 if (priv->config & CFG_STATIC_BSSID)
5566 bssid = priv->bssid;
5569 err = ipw2100_set_mandatory_bssid(priv, bssid, batch_mode);
5573 if (priv->config & CFG_STATIC_ESSID)
5574 err = ipw2100_set_essid(priv, priv->essid, priv->essid_len,
5577 err = ipw2100_set_essid(priv, NULL, 0, batch_mode);
5581 err = ipw2100_configure_security(priv, batch_mode);
5585 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
5587 ipw2100_set_ibss_beacon_interval(priv,
5588 priv->beacon_interval,
5593 err = ipw2100_set_tx_power(priv, priv->tx_power);
5599 err = ipw2100_set_fragmentation_threshold(
5600 priv, priv->frag_threshold, batch_mode);
5605 IPW_DEBUG_INFO("exit\n");
5610 /*************************************************************************
5612 * EXTERNALLY CALLED METHODS
5614 *************************************************************************/
5616 /* This method is called by the network layer -- not to be confused with
5617 * ipw2100_set_mac_address() declared above called by this driver (and this
5618 * method as well) to talk to the firmware */
5619 static int ipw2100_set_address(struct net_device *dev, void *p)
5621 struct ipw2100_priv *priv = ieee80211_priv(dev);
5622 struct sockaddr *addr = p;
5625 if (!is_valid_ether_addr(addr->sa_data))
5626 return -EADDRNOTAVAIL;
5628 down(&priv->action_sem);
5630 priv->config |= CFG_CUSTOM_MAC;
5631 memcpy(priv->mac_addr, addr->sa_data, ETH_ALEN);
5633 err = ipw2100_set_mac_address(priv, 0);
5637 priv->reset_backoff = 0;
5638 up(&priv->action_sem);
5639 ipw2100_reset_adapter(priv);
5643 up(&priv->action_sem);
5647 static int ipw2100_open(struct net_device *dev)
5649 struct ipw2100_priv *priv = ieee80211_priv(dev);
5650 unsigned long flags;
5651 IPW_DEBUG_INFO("dev->open\n");
5653 spin_lock_irqsave(&priv->low_lock, flags);
5654 if (priv->status & STATUS_ASSOCIATED) {
5655 netif_carrier_on(dev);
5656 netif_start_queue(dev);
5658 spin_unlock_irqrestore(&priv->low_lock, flags);
5663 static int ipw2100_close(struct net_device *dev)
5665 struct ipw2100_priv *priv = ieee80211_priv(dev);
5666 unsigned long flags;
5667 struct list_head *element;
5668 struct ipw2100_tx_packet *packet;
5670 IPW_DEBUG_INFO("enter\n");
5672 spin_lock_irqsave(&priv->low_lock, flags);
5674 if (priv->status & STATUS_ASSOCIATED)
5675 netif_carrier_off(dev);
5676 netif_stop_queue(dev);
5678 /* Flush the TX queue ... */
5679 while (!list_empty(&priv->tx_pend_list)) {
5680 element = priv->tx_pend_list.next;
5681 packet = list_entry(element, struct ipw2100_tx_packet, list);
5684 DEC_STAT(&priv->tx_pend_stat);
5686 ieee80211_txb_free(packet->info.d_struct.txb);
5687 packet->info.d_struct.txb = NULL;
5689 list_add_tail(element, &priv->tx_free_list);
5690 INC_STAT(&priv->tx_free_stat);
5692 spin_unlock_irqrestore(&priv->low_lock, flags);
5694 IPW_DEBUG_INFO("exit\n");
5700 * TODO: Fix this function... its just wrong
5702 static void ipw2100_tx_timeout(struct net_device *dev)
5704 struct ipw2100_priv *priv = ieee80211_priv(dev);
5706 priv->ieee->stats.tx_errors++;
5708 #ifdef CONFIG_IPW2100_MONITOR
5709 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
5713 IPW_DEBUG_INFO("%s: TX timed out. Scheduling firmware restart.\n",
5715 schedule_reset(priv);
5719 * TODO: reimplement it so that it reads statistics
5720 * from the adapter using ordinal tables
5721 * instead of/in addition to collecting them
5724 static struct net_device_stats *ipw2100_stats(struct net_device *dev)
5726 struct ipw2100_priv *priv = ieee80211_priv(dev);
5728 return &priv->ieee->stats;
5731 #if WIRELESS_EXT < 18
5732 /* Support for wpa_supplicant before WE-18, deprecated. */
5734 /* following definitions must match definitions in driver_ipw.c */
5736 #define IPW2100_IOCTL_WPA_SUPPLICANT SIOCIWFIRSTPRIV+30
5738 #define IPW2100_CMD_SET_WPA_PARAM 1
5739 #define IPW2100_CMD_SET_WPA_IE 2
5740 #define IPW2100_CMD_SET_ENCRYPTION 3
5741 #define IPW2100_CMD_MLME 4
5743 #define IPW2100_PARAM_WPA_ENABLED 1
5744 #define IPW2100_PARAM_TKIP_COUNTERMEASURES 2
5745 #define IPW2100_PARAM_DROP_UNENCRYPTED 3
5746 #define IPW2100_PARAM_PRIVACY_INVOKED 4
5747 #define IPW2100_PARAM_AUTH_ALGS 5
5748 #define IPW2100_PARAM_IEEE_802_1X 6
5750 #define IPW2100_MLME_STA_DEAUTH 1
5751 #define IPW2100_MLME_STA_DISASSOC 2
5753 #define IPW2100_CRYPT_ERR_UNKNOWN_ALG 2
5754 #define IPW2100_CRYPT_ERR_UNKNOWN_ADDR 3
5755 #define IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED 4
5756 #define IPW2100_CRYPT_ERR_KEY_SET_FAILED 5
5757 #define IPW2100_CRYPT_ERR_TX_KEY_SET_FAILED 6
5758 #define IPW2100_CRYPT_ERR_CARD_CONF_FAILED 7
5760 #define IPW2100_CRYPT_ALG_NAME_LEN 16
5762 struct ipw2100_param {
5764 u8 sta_addr[ETH_ALEN];
5780 u8 alg[IPW2100_CRYPT_ALG_NAME_LEN];
5784 u8 seq[8]; /* sequence counter (set: RX, get: TX) */
5792 /* end of driver_ipw.c code */
5793 #endif /* WIRELESS_EXT < 18 */
5795 static int ipw2100_wpa_enable(struct ipw2100_priv *priv, int value)
5797 /* This is called when wpa_supplicant loads and closes the driver
5799 priv->ieee->wpa_enabled = value;
5803 #if WIRELESS_EXT < 18
5804 #define IW_AUTH_ALG_OPEN_SYSTEM 0x1
5805 #define IW_AUTH_ALG_SHARED_KEY 0x2
5808 static int ipw2100_wpa_set_auth_algs(struct ipw2100_priv *priv, int value)
5811 struct ieee80211_device *ieee = priv->ieee;
5812 struct ieee80211_security sec = {
5813 .flags = SEC_AUTH_MODE,
5817 if (value & IW_AUTH_ALG_SHARED_KEY) {
5818 sec.auth_mode = WLAN_AUTH_SHARED_KEY;
5820 } else if (value & IW_AUTH_ALG_OPEN_SYSTEM) {
5821 sec.auth_mode = WLAN_AUTH_OPEN;
5826 if (ieee->set_security)
5827 ieee->set_security(ieee->dev, &sec);
5834 void ipw2100_wpa_assoc_frame(struct ipw2100_priv *priv,
5835 char *wpa_ie, int wpa_ie_len)
5838 struct ipw2100_wpa_assoc_frame frame;
5840 frame.fixed_ie_mask = 0;
5843 memcpy(frame.var_ie, wpa_ie, wpa_ie_len);
5844 frame.var_ie_len = wpa_ie_len;
5846 /* make sure WPA is enabled */
5847 ipw2100_wpa_enable(priv, 1);
5848 ipw2100_set_wpa_ie(priv, &frame, 0);
5851 #if WIRELESS_EXT < 18
5852 static int ipw2100_wpa_set_param(struct net_device *dev, u8 name, u32 value)
5854 struct ipw2100_priv *priv = ieee80211_priv(dev);
5855 struct ieee80211_crypt_data *crypt;
5856 unsigned long flags;
5860 case IPW2100_PARAM_WPA_ENABLED:
5861 ret = ipw2100_wpa_enable(priv, value);
5864 case IPW2100_PARAM_TKIP_COUNTERMEASURES:
5865 crypt = priv->ieee->crypt[priv->ieee->tx_keyidx];
5866 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) {
5867 IPW_DEBUG_WARNING("Can't set TKIP countermeasures: "
5868 "crypt not set!\n");
5872 flags = crypt->ops->get_flags(crypt->priv);
5875 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
5877 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
5879 crypt->ops->set_flags(flags, crypt->priv);
5883 case IPW2100_PARAM_DROP_UNENCRYPTED:{
5884 /* See IW_AUTH_DROP_UNENCRYPTED handling for details */
5885 struct ieee80211_security sec = {
5886 .flags = SEC_ENABLED,
5889 priv->ieee->drop_unencrypted = value;
5890 /* We only change SEC_LEVEL for open mode. Others
5891 * are set by ipw_wpa_set_encryption.
5894 sec.flags |= SEC_LEVEL;
5895 sec.level = SEC_LEVEL_0;
5897 sec.flags |= SEC_LEVEL;
5898 sec.level = SEC_LEVEL_1;
5900 if (priv->ieee->set_security)
5901 priv->ieee->set_security(priv->ieee->dev, &sec);
5905 case IPW2100_PARAM_PRIVACY_INVOKED:
5906 priv->ieee->privacy_invoked = value;
5909 case IPW2100_PARAM_AUTH_ALGS:
5910 ret = ipw2100_wpa_set_auth_algs(priv, value);
5913 case IPW2100_PARAM_IEEE_802_1X:
5914 priv->ieee->ieee802_1x = value;
5918 printk(KERN_ERR DRV_NAME ": %s: Unknown WPA param: %d\n",
5926 static int ipw2100_wpa_mlme(struct net_device *dev, int command, int reason)
5929 struct ipw2100_priv *priv = ieee80211_priv(dev);
5933 case IPW2100_MLME_STA_DEAUTH:
5937 case IPW2100_MLME_STA_DISASSOC:
5938 ipw2100_disassociate_bssid(priv);
5942 printk(KERN_ERR DRV_NAME ": %s: Unknown MLME request: %d\n",
5943 dev->name, command);
5950 static int ipw2100_wpa_set_wpa_ie(struct net_device *dev,
5951 struct ipw2100_param *param, int plen)
5954 struct ipw2100_priv *priv = ieee80211_priv(dev);
5955 struct ieee80211_device *ieee = priv->ieee;
5958 if (!ieee->wpa_enabled)
5961 if (param->u.wpa_ie.len > MAX_WPA_IE_LEN ||
5962 (param->u.wpa_ie.len && param->u.wpa_ie.data == NULL))
5965 if (param->u.wpa_ie.len) {
5966 buf = kmalloc(param->u.wpa_ie.len, GFP_KERNEL);
5970 memcpy(buf, param->u.wpa_ie.data, param->u.wpa_ie.len);
5972 kfree(ieee->wpa_ie);
5974 ieee->wpa_ie_len = param->u.wpa_ie.len;
5977 kfree(ieee->wpa_ie);
5978 ieee->wpa_ie = NULL;
5979 ieee->wpa_ie_len = 0;
5982 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
5987 /* implementation borrowed from hostap driver */
5989 static int ipw2100_wpa_set_encryption(struct net_device *dev,
5990 struct ipw2100_param *param,
5994 struct ipw2100_priv *priv = ieee80211_priv(dev);
5995 struct ieee80211_device *ieee = priv->ieee;
5996 struct ieee80211_crypto_ops *ops;
5997 struct ieee80211_crypt_data **crypt;
5999 struct ieee80211_security sec = {
6003 param->u.crypt.err = 0;
6004 param->u.crypt.alg[IPW2100_CRYPT_ALG_NAME_LEN - 1] = '\0';
6007 (int)((char *)param->u.crypt.key - (char *)param) +
6008 param->u.crypt.key_len) {
6009 IPW_DEBUG_INFO("Len mismatch %d, %d\n", param_len,
6010 param->u.crypt.key_len);
6013 if (param->sta_addr[0] == 0xff && param->sta_addr[1] == 0xff &&
6014 param->sta_addr[2] == 0xff && param->sta_addr[3] == 0xff &&
6015 param->sta_addr[4] == 0xff && param->sta_addr[5] == 0xff) {
6016 if (param->u.crypt.idx >= WEP_KEYS)
6018 crypt = &ieee->crypt[param->u.crypt.idx];
6023 sec.flags |= SEC_ENABLED | SEC_ENCRYPT;
6024 if (strcmp(param->u.crypt.alg, "none") == 0) {
6028 sec.level = SEC_LEVEL_0;
6029 sec.flags |= SEC_LEVEL;
6030 ieee80211_crypt_delayed_deinit(ieee, crypt);
6037 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6038 if (ops == NULL && strcmp(param->u.crypt.alg, "WEP") == 0) {
6039 request_module("ieee80211_crypt_wep");
6040 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6041 } else if (ops == NULL && strcmp(param->u.crypt.alg, "TKIP") == 0) {
6042 request_module("ieee80211_crypt_tkip");
6043 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6044 } else if (ops == NULL && strcmp(param->u.crypt.alg, "CCMP") == 0) {
6045 request_module("ieee80211_crypt_ccmp");
6046 ops = ieee80211_get_crypto_ops(param->u.crypt.alg);
6049 IPW_DEBUG_INFO("%s: unknown crypto alg '%s'\n",
6050 dev->name, param->u.crypt.alg);
6051 param->u.crypt.err = IPW2100_CRYPT_ERR_UNKNOWN_ALG;
6056 if (*crypt == NULL || (*crypt)->ops != ops) {
6057 struct ieee80211_crypt_data *new_crypt;
6059 ieee80211_crypt_delayed_deinit(ieee, crypt);
6061 new_crypt = (struct ieee80211_crypt_data *)
6062 kmalloc(sizeof(struct ieee80211_crypt_data), GFP_KERNEL);
6063 if (new_crypt == NULL) {
6067 memset(new_crypt, 0, sizeof(struct ieee80211_crypt_data));
6068 new_crypt->ops = ops;
6069 if (new_crypt->ops && try_module_get(new_crypt->ops->owner))
6071 new_crypt->ops->init(param->u.crypt.idx);
6073 if (new_crypt->priv == NULL) {
6075 param->u.crypt.err =
6076 IPW2100_CRYPT_ERR_CRYPT_INIT_FAILED;
6084 if (param->u.crypt.key_len > 0 && (*crypt)->ops->set_key &&
6085 (*crypt)->ops->set_key(param->u.crypt.key,
6086 param->u.crypt.key_len, param->u.crypt.seq,
6087 (*crypt)->priv) < 0) {
6088 IPW_DEBUG_INFO("%s: key setting failed\n", dev->name);
6089 param->u.crypt.err = IPW2100_CRYPT_ERR_KEY_SET_FAILED;
6094 if (param->u.crypt.set_tx) {
6095 ieee->tx_keyidx = param->u.crypt.idx;
6096 sec.active_key = param->u.crypt.idx;
6097 sec.flags |= SEC_ACTIVE_KEY;
6100 if (ops->name != NULL) {
6102 if (strcmp(ops->name, "WEP") == 0) {
6103 memcpy(sec.keys[param->u.crypt.idx],
6104 param->u.crypt.key, param->u.crypt.key_len);
6105 sec.key_sizes[param->u.crypt.idx] =
6106 param->u.crypt.key_len;
6107 sec.flags |= (1 << param->u.crypt.idx);
6108 sec.flags |= SEC_LEVEL;
6109 sec.level = SEC_LEVEL_1;
6110 } else if (strcmp(ops->name, "TKIP") == 0) {
6111 sec.flags |= SEC_LEVEL;
6112 sec.level = SEC_LEVEL_2;
6113 } else if (strcmp(ops->name, "CCMP") == 0) {
6114 sec.flags |= SEC_LEVEL;
6115 sec.level = SEC_LEVEL_3;
6119 if (ieee->set_security)
6120 ieee->set_security(ieee->dev, &sec);
6122 /* Do not reset port if card is in Managed mode since resetting will
6123 * generate new IEEE 802.11 authentication which may end up in looping
6124 * with IEEE 802.1X. If your hardware requires a reset after WEP
6125 * configuration (for example... Prism2), implement the reset_port in
6126 * the callbacks structures used to initialize the 802.11 stack. */
6127 if (ieee->reset_on_keychange &&
6128 ieee->iw_mode != IW_MODE_INFRA &&
6129 ieee->reset_port && ieee->reset_port(dev)) {
6130 IPW_DEBUG_INFO("%s: reset_port failed\n", dev->name);
6131 param->u.crypt.err = IPW2100_CRYPT_ERR_CARD_CONF_FAILED;
6138 static int ipw2100_wpa_supplicant(struct net_device *dev, struct iw_point *p)
6141 struct ipw2100_param *param;
6144 IPW_DEBUG_IOCTL("wpa_supplicant: len=%d\n", p->length);
6146 if (p->length < sizeof(struct ipw2100_param) || !p->pointer)
6149 param = (struct ipw2100_param *)kmalloc(p->length, GFP_KERNEL);
6153 if (copy_from_user(param, p->pointer, p->length)) {
6158 switch (param->cmd) {
6160 case IPW2100_CMD_SET_WPA_PARAM:
6161 ret = ipw2100_wpa_set_param(dev, param->u.wpa_param.name,
6162 param->u.wpa_param.value);
6165 case IPW2100_CMD_SET_WPA_IE:
6166 ret = ipw2100_wpa_set_wpa_ie(dev, param, p->length);
6169 case IPW2100_CMD_SET_ENCRYPTION:
6170 ret = ipw2100_wpa_set_encryption(dev, param, p->length);
6173 case IPW2100_CMD_MLME:
6174 ret = ipw2100_wpa_mlme(dev, param->u.mlme.command,
6175 param->u.mlme.reason_code);
6179 printk(KERN_ERR DRV_NAME
6180 ": %s: Unknown WPA supplicant request: %d\n", dev->name,
6186 if (ret == 0 && copy_to_user(p->pointer, param, p->length))
6193 static int ipw2100_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6195 struct iwreq *wrq = (struct iwreq *)rq;
6198 case IPW2100_IOCTL_WPA_SUPPLICANT:
6199 ret = ipw2100_wpa_supplicant(dev, &wrq->u.data);
6208 #endif /* WIRELESS_EXT < 18 */
6210 static void ipw_ethtool_get_drvinfo(struct net_device *dev,
6211 struct ethtool_drvinfo *info)
6213 struct ipw2100_priv *priv = ieee80211_priv(dev);
6214 char fw_ver[64], ucode_ver[64];
6216 strcpy(info->driver, DRV_NAME);
6217 strcpy(info->version, DRV_VERSION);
6219 ipw2100_get_fwversion(priv, fw_ver, sizeof(fw_ver));
6220 ipw2100_get_ucodeversion(priv, ucode_ver, sizeof(ucode_ver));
6222 snprintf(info->fw_version, sizeof(info->fw_version), "%s:%d:%s",
6223 fw_ver, priv->eeprom_version, ucode_ver);
6225 strcpy(info->bus_info, pci_name(priv->pci_dev));
6228 static u32 ipw2100_ethtool_get_link(struct net_device *dev)
6230 struct ipw2100_priv *priv = ieee80211_priv(dev);
6231 return (priv->status & STATUS_ASSOCIATED) ? 1 : 0;
6234 static struct ethtool_ops ipw2100_ethtool_ops = {
6235 .get_link = ipw2100_ethtool_get_link,
6236 .get_drvinfo = ipw_ethtool_get_drvinfo,
6239 static void ipw2100_hang_check(void *adapter)
6241 struct ipw2100_priv *priv = adapter;
6242 unsigned long flags;
6243 u32 rtc = 0xa5a5a5a5;
6244 u32 len = sizeof(rtc);
6247 spin_lock_irqsave(&priv->low_lock, flags);
6249 if (priv->fatal_error != 0) {
6250 /* If fatal_error is set then we need to restart */
6251 IPW_DEBUG_INFO("%s: Hardware fatal error detected.\n",
6252 priv->net_dev->name);
6255 } else if (ipw2100_get_ordinal(priv, IPW_ORD_RTC_TIME, &rtc, &len) ||
6256 (rtc == priv->last_rtc)) {
6257 /* Check if firmware is hung */
6258 IPW_DEBUG_INFO("%s: Firmware RTC stalled.\n",
6259 priv->net_dev->name);
6266 priv->stop_hang_check = 1;
6269 /* Restart the NIC */
6270 schedule_reset(priv);
6273 priv->last_rtc = rtc;
6275 if (!priv->stop_hang_check)
6276 queue_delayed_work(priv->workqueue, &priv->hang_check, HZ / 2);
6278 spin_unlock_irqrestore(&priv->low_lock, flags);
6281 static void ipw2100_rf_kill(void *adapter)
6283 struct ipw2100_priv *priv = adapter;
6284 unsigned long flags;
6286 spin_lock_irqsave(&priv->low_lock, flags);
6288 if (rf_kill_active(priv)) {
6289 IPW_DEBUG_RF_KILL("RF Kill active, rescheduling GPIO check\n");
6290 if (!priv->stop_rf_kill)
6291 queue_delayed_work(priv->workqueue, &priv->rf_kill, HZ);
6295 /* RF Kill is now disabled, so bring the device back up */
6297 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6298 IPW_DEBUG_RF_KILL("HW RF Kill no longer active, restarting "
6300 schedule_reset(priv);
6302 IPW_DEBUG_RF_KILL("HW RF Kill deactivated. SW RF Kill still "
6306 spin_unlock_irqrestore(&priv->low_lock, flags);
6309 static void ipw2100_irq_tasklet(struct ipw2100_priv *priv);
6311 /* Look into using netdev destructor to shutdown ieee80211? */
6313 static struct net_device *ipw2100_alloc_device(struct pci_dev *pci_dev,
6314 void __iomem * base_addr,
6315 unsigned long mem_start,
6316 unsigned long mem_len)
6318 struct ipw2100_priv *priv;
6319 struct net_device *dev;
6321 dev = alloc_ieee80211(sizeof(struct ipw2100_priv));
6324 priv = ieee80211_priv(dev);
6325 priv->ieee = netdev_priv(dev);
6326 priv->pci_dev = pci_dev;
6327 priv->net_dev = dev;
6329 priv->ieee->hard_start_xmit = ipw2100_tx;
6330 priv->ieee->set_security = shim__set_security;
6332 priv->ieee->perfect_rssi = -20;
6333 priv->ieee->worst_rssi = -85;
6335 dev->open = ipw2100_open;
6336 dev->stop = ipw2100_close;
6337 dev->init = ipw2100_net_init;
6338 #if WIRELESS_EXT < 18
6339 dev->do_ioctl = ipw2100_ioctl;
6341 dev->get_stats = ipw2100_stats;
6342 dev->ethtool_ops = &ipw2100_ethtool_ops;
6343 dev->tx_timeout = ipw2100_tx_timeout;
6344 dev->wireless_handlers = &ipw2100_wx_handler_def;
6345 dev->get_wireless_stats = ipw2100_wx_wireless_stats;
6346 dev->set_mac_address = ipw2100_set_address;
6347 dev->watchdog_timeo = 3 * HZ;
6350 dev->base_addr = (unsigned long)base_addr;
6351 dev->mem_start = mem_start;
6352 dev->mem_end = dev->mem_start + mem_len - 1;
6354 /* NOTE: We don't use the wireless_handlers hook
6355 * in dev as the system will start throwing WX requests
6356 * to us before we're actually initialized and it just
6357 * ends up causing problems. So, we just handle
6358 * the WX extensions through the ipw2100_ioctl interface */
6360 /* memset() puts everything to 0, so we only have explicitely set
6361 * those values that need to be something else */
6363 /* If power management is turned on, default to AUTO mode */
6364 priv->power_mode = IPW_POWER_AUTO;
6366 #ifdef CONFIG_IPW2100_MONITOR
6367 priv->config |= CFG_CRC_CHECK;
6369 priv->ieee->wpa_enabled = 0;
6370 priv->ieee->drop_unencrypted = 0;
6371 priv->ieee->privacy_invoked = 0;
6372 priv->ieee->ieee802_1x = 1;
6374 /* Set module parameters */
6377 priv->ieee->iw_mode = IW_MODE_ADHOC;
6379 #ifdef CONFIG_IPW2100_MONITOR
6381 priv->ieee->iw_mode = IW_MODE_MONITOR;
6386 priv->ieee->iw_mode = IW_MODE_INFRA;
6391 priv->status |= STATUS_RF_KILL_SW;
6394 ((channel >= REG_MIN_CHANNEL) && (channel <= REG_MAX_CHANNEL))) {
6395 priv->config |= CFG_STATIC_CHANNEL;
6396 priv->channel = channel;
6400 priv->config |= CFG_ASSOCIATE;
6402 priv->beacon_interval = DEFAULT_BEACON_INTERVAL;
6403 priv->short_retry_limit = DEFAULT_SHORT_RETRY_LIMIT;
6404 priv->long_retry_limit = DEFAULT_LONG_RETRY_LIMIT;
6405 priv->rts_threshold = DEFAULT_RTS_THRESHOLD | RTS_DISABLED;
6406 priv->frag_threshold = DEFAULT_FTS | FRAG_DISABLED;
6407 priv->tx_power = IPW_TX_POWER_DEFAULT;
6408 priv->tx_rates = DEFAULT_TX_RATES;
6410 strcpy(priv->nick, "ipw2100");
6412 spin_lock_init(&priv->low_lock);
6413 sema_init(&priv->action_sem, 1);
6414 sema_init(&priv->adapter_sem, 1);
6416 init_waitqueue_head(&priv->wait_command_queue);
6418 netif_carrier_off(dev);
6420 INIT_LIST_HEAD(&priv->msg_free_list);
6421 INIT_LIST_HEAD(&priv->msg_pend_list);
6422 INIT_STAT(&priv->msg_free_stat);
6423 INIT_STAT(&priv->msg_pend_stat);
6425 INIT_LIST_HEAD(&priv->tx_free_list);
6426 INIT_LIST_HEAD(&priv->tx_pend_list);
6427 INIT_STAT(&priv->tx_free_stat);
6428 INIT_STAT(&priv->tx_pend_stat);
6430 INIT_LIST_HEAD(&priv->fw_pend_list);
6431 INIT_STAT(&priv->fw_pend_stat);
6433 #ifdef PF_SYNCTHREAD
6434 priv->workqueue = create_workqueue(DRV_NAME, 0);
6436 priv->workqueue = create_workqueue(DRV_NAME);
6438 INIT_WORK(&priv->reset_work,
6439 (void (*)(void *))ipw2100_reset_adapter, priv);
6440 INIT_WORK(&priv->security_work,
6441 (void (*)(void *))ipw2100_security_work, priv);
6442 INIT_WORK(&priv->wx_event_work,
6443 (void (*)(void *))ipw2100_wx_event_work, priv);
6444 INIT_WORK(&priv->hang_check, ipw2100_hang_check, priv);
6445 INIT_WORK(&priv->rf_kill, ipw2100_rf_kill, priv);
6447 tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
6448 ipw2100_irq_tasklet, (unsigned long)priv);
6450 /* NOTE: We do not start the deferred work for status checks yet */
6451 priv->stop_rf_kill = 1;
6452 priv->stop_hang_check = 1;
6457 static int ipw2100_pci_init_one(struct pci_dev *pci_dev,
6458 const struct pci_device_id *ent)
6460 unsigned long mem_start, mem_len, mem_flags;
6461 void __iomem *base_addr = NULL;
6462 struct net_device *dev = NULL;
6463 struct ipw2100_priv *priv = NULL;
6468 IPW_DEBUG_INFO("enter\n");
6470 mem_start = pci_resource_start(pci_dev, 0);
6471 mem_len = pci_resource_len(pci_dev, 0);
6472 mem_flags = pci_resource_flags(pci_dev, 0);
6474 if ((mem_flags & IORESOURCE_MEM) != IORESOURCE_MEM) {
6475 IPW_DEBUG_INFO("weird - resource type is not memory\n");
6480 base_addr = ioremap_nocache(mem_start, mem_len);
6482 printk(KERN_WARNING DRV_NAME
6483 "Error calling ioremap_nocache.\n");
6488 /* allocate and initialize our net_device */
6489 dev = ipw2100_alloc_device(pci_dev, base_addr, mem_start, mem_len);
6491 printk(KERN_WARNING DRV_NAME
6492 "Error calling ipw2100_alloc_device.\n");
6497 /* set up PCI mappings for device */
6498 err = pci_enable_device(pci_dev);
6500 printk(KERN_WARNING DRV_NAME
6501 "Error calling pci_enable_device.\n");
6505 priv = ieee80211_priv(dev);
6507 pci_set_master(pci_dev);
6508 pci_set_drvdata(pci_dev, priv);
6510 err = pci_set_dma_mask(pci_dev, DMA_32BIT_MASK);
6512 printk(KERN_WARNING DRV_NAME
6513 "Error calling pci_set_dma_mask.\n");
6514 pci_disable_device(pci_dev);
6518 err = pci_request_regions(pci_dev, DRV_NAME);
6520 printk(KERN_WARNING DRV_NAME
6521 "Error calling pci_request_regions.\n");
6522 pci_disable_device(pci_dev);
6526 /* We disable the RETRY_TIMEOUT register (0x41) to keep
6527 * PCI Tx retries from interfering with C3 CPU state */
6528 pci_read_config_dword(pci_dev, 0x40, &val);
6529 if ((val & 0x0000ff00) != 0)
6530 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6532 pci_set_power_state(pci_dev, PCI_D0);
6534 if (!ipw2100_hw_is_adapter_in_system(dev)) {
6535 printk(KERN_WARNING DRV_NAME
6536 "Device not found via register read.\n");
6541 SET_NETDEV_DEV(dev, &pci_dev->dev);
6543 /* Force interrupts to be shut off on the device */
6544 priv->status |= STATUS_INT_ENABLED;
6545 ipw2100_disable_interrupts(priv);
6547 /* Allocate and initialize the Tx/Rx queues and lists */
6548 if (ipw2100_queues_allocate(priv)) {
6549 printk(KERN_WARNING DRV_NAME
6550 "Error calilng ipw2100_queues_allocate.\n");
6554 ipw2100_queues_initialize(priv);
6556 err = request_irq(pci_dev->irq,
6557 ipw2100_interrupt, SA_SHIRQ, dev->name, priv);
6559 printk(KERN_WARNING DRV_NAME
6560 "Error calling request_irq: %d.\n", pci_dev->irq);
6563 dev->irq = pci_dev->irq;
6565 IPW_DEBUG_INFO("Attempting to register device...\n");
6567 SET_MODULE_OWNER(dev);
6569 printk(KERN_INFO DRV_NAME
6570 ": Detected Intel PRO/Wireless 2100 Network Connection\n");
6572 /* Bring up the interface. Pre 0.46, after we registered the
6573 * network device we would call ipw2100_up. This introduced a race
6574 * condition with newer hotplug configurations (network was coming
6575 * up and making calls before the device was initialized).
6577 * If we called ipw2100_up before we registered the device, then the
6578 * device name wasn't registered. So, we instead use the net_dev->init
6579 * member to call a function that then just turns and calls ipw2100_up.
6580 * net_dev->init is called after name allocation but before the
6581 * notifier chain is called */
6582 down(&priv->action_sem);
6583 err = register_netdev(dev);
6585 printk(KERN_WARNING DRV_NAME
6586 "Error calling register_netdev.\n");
6591 IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev));
6593 /* perform this after register_netdev so that dev->name is set */
6594 sysfs_create_group(&pci_dev->dev.kobj, &ipw2100_attribute_group);
6596 /* If the RF Kill switch is disabled, go ahead and complete the
6597 * startup sequence */
6598 if (!(priv->status & STATUS_RF_KILL_MASK)) {
6599 /* Enable the adapter - sends HOST_COMPLETE */
6600 if (ipw2100_enable_adapter(priv)) {
6601 printk(KERN_WARNING DRV_NAME
6602 ": %s: failed in call to enable adapter.\n",
6603 priv->net_dev->name);
6604 ipw2100_hw_stop_adapter(priv);
6609 /* Start a scan . . . */
6610 ipw2100_set_scan_options(priv);
6611 ipw2100_start_scan(priv);
6614 IPW_DEBUG_INFO("exit\n");
6616 priv->status |= STATUS_INITIALIZED;
6618 up(&priv->action_sem);
6623 up(&priv->action_sem);
6628 unregister_netdev(dev);
6630 ipw2100_hw_stop_adapter(priv);
6632 ipw2100_disable_interrupts(priv);
6635 free_irq(dev->irq, priv);
6637 ipw2100_kill_workqueue(priv);
6639 /* These are safe to call even if they weren't allocated */
6640 ipw2100_queues_free(priv);
6641 sysfs_remove_group(&pci_dev->dev.kobj,
6642 &ipw2100_attribute_group);
6644 free_ieee80211(dev);
6645 pci_set_drvdata(pci_dev, NULL);
6651 pci_release_regions(pci_dev);
6652 pci_disable_device(pci_dev);
6657 static void __devexit ipw2100_pci_remove_one(struct pci_dev *pci_dev)
6659 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6660 struct net_device *dev;
6663 down(&priv->action_sem);
6665 priv->status &= ~STATUS_INITIALIZED;
6667 dev = priv->net_dev;
6668 sysfs_remove_group(&pci_dev->dev.kobj,
6669 &ipw2100_attribute_group);
6672 if (ipw2100_firmware.version)
6673 ipw2100_release_firmware(priv, &ipw2100_firmware);
6675 /* Take down the hardware */
6678 /* Release the semaphore so that the network subsystem can
6679 * complete any needed calls into the driver... */
6680 up(&priv->action_sem);
6682 /* Unregister the device first - this results in close()
6683 * being called if the device is open. If we free storage
6684 * first, then close() will crash. */
6685 unregister_netdev(dev);
6687 /* ipw2100_down will ensure that there is no more pending work
6688 * in the workqueue's, so we can safely remove them now. */
6689 ipw2100_kill_workqueue(priv);
6691 ipw2100_queues_free(priv);
6693 /* Free potential debugging firmware snapshot */
6694 ipw2100_snapshot_free(priv);
6697 free_irq(dev->irq, priv);
6700 iounmap((void __iomem *)dev->base_addr);
6702 free_ieee80211(dev);
6705 pci_release_regions(pci_dev);
6706 pci_disable_device(pci_dev);
6708 IPW_DEBUG_INFO("exit\n");
6712 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,11)
6713 static int ipw2100_suspend(struct pci_dev *pci_dev, u32 state)
6715 static int ipw2100_suspend(struct pci_dev *pci_dev, pm_message_t state)
6718 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6719 struct net_device *dev = priv->net_dev;
6721 IPW_DEBUG_INFO("%s: Going into suspend...\n", dev->name);
6723 down(&priv->action_sem);
6724 if (priv->status & STATUS_INITIALIZED) {
6725 /* Take down the device; powers it off, etc. */
6729 /* Remove the PRESENT state of the device */
6730 netif_device_detach(dev);
6732 pci_save_state(pci_dev);
6733 pci_disable_device(pci_dev);
6734 pci_set_power_state(pci_dev, PCI_D3hot);
6736 up(&priv->action_sem);
6741 static int ipw2100_resume(struct pci_dev *pci_dev)
6743 struct ipw2100_priv *priv = pci_get_drvdata(pci_dev);
6744 struct net_device *dev = priv->net_dev;
6747 if (IPW2100_PM_DISABLED)
6750 down(&priv->action_sem);
6752 IPW_DEBUG_INFO("%s: Coming out of suspend...\n", dev->name);
6754 pci_set_power_state(pci_dev, PCI_D0);
6755 pci_enable_device(pci_dev);
6756 pci_restore_state(pci_dev);
6759 * Suspend/Resume resets the PCI configuration space, so we have to
6760 * re-disable the RETRY_TIMEOUT register (0x41) to keep PCI Tx retries
6761 * from interfering with C3 CPU state. pci_restore_state won't help
6762 * here since it only restores the first 64 bytes pci config header.
6764 pci_read_config_dword(pci_dev, 0x40, &val);
6765 if ((val & 0x0000ff00) != 0)
6766 pci_write_config_dword(pci_dev, 0x40, val & 0xffff00ff);
6768 /* Set the device back into the PRESENT state; this will also wake
6769 * the queue of needed */
6770 netif_device_attach(dev);
6772 /* Bring the device back up */
6773 if (!(priv->status & STATUS_RF_KILL_SW))
6774 ipw2100_up(priv, 0);
6776 up(&priv->action_sem);
6782 #define IPW2100_DEV_ID(x) { PCI_VENDOR_ID_INTEL, 0x1043, 0x8086, x }
6784 static struct pci_device_id ipw2100_pci_id_table[] __devinitdata = {
6785 IPW2100_DEV_ID(0x2520), /* IN 2100A mPCI 3A */
6786 IPW2100_DEV_ID(0x2521), /* IN 2100A mPCI 3B */
6787 IPW2100_DEV_ID(0x2524), /* IN 2100A mPCI 3B */
6788 IPW2100_DEV_ID(0x2525), /* IN 2100A mPCI 3B */
6789 IPW2100_DEV_ID(0x2526), /* IN 2100A mPCI Gen A3 */
6790 IPW2100_DEV_ID(0x2522), /* IN 2100 mPCI 3B */
6791 IPW2100_DEV_ID(0x2523), /* IN 2100 mPCI 3A */
6792 IPW2100_DEV_ID(0x2527), /* IN 2100 mPCI 3B */
6793 IPW2100_DEV_ID(0x2528), /* IN 2100 mPCI 3B */
6794 IPW2100_DEV_ID(0x2529), /* IN 2100 mPCI 3B */
6795 IPW2100_DEV_ID(0x252B), /* IN 2100 mPCI 3A */
6796 IPW2100_DEV_ID(0x252C), /* IN 2100 mPCI 3A */
6797 IPW2100_DEV_ID(0x252D), /* IN 2100 mPCI 3A */
6799 IPW2100_DEV_ID(0x2550), /* IB 2100A mPCI 3B */
6800 IPW2100_DEV_ID(0x2551), /* IB 2100 mPCI 3B */
6801 IPW2100_DEV_ID(0x2553), /* IB 2100 mPCI 3B */
6802 IPW2100_DEV_ID(0x2554), /* IB 2100 mPCI 3B */
6803 IPW2100_DEV_ID(0x2555), /* IB 2100 mPCI 3B */
6805 IPW2100_DEV_ID(0x2560), /* DE 2100A mPCI 3A */
6806 IPW2100_DEV_ID(0x2562), /* DE 2100A mPCI 3A */
6807 IPW2100_DEV_ID(0x2563), /* DE 2100A mPCI 3A */
6808 IPW2100_DEV_ID(0x2561), /* DE 2100 mPCI 3A */
6809 IPW2100_DEV_ID(0x2565), /* DE 2100 mPCI 3A */
6810 IPW2100_DEV_ID(0x2566), /* DE 2100 mPCI 3A */
6811 IPW2100_DEV_ID(0x2567), /* DE 2100 mPCI 3A */
6813 IPW2100_DEV_ID(0x2570), /* GA 2100 mPCI 3B */
6815 IPW2100_DEV_ID(0x2580), /* TO 2100A mPCI 3B */
6816 IPW2100_DEV_ID(0x2582), /* TO 2100A mPCI 3B */
6817 IPW2100_DEV_ID(0x2583), /* TO 2100A mPCI 3B */
6818 IPW2100_DEV_ID(0x2581), /* TO 2100 mPCI 3B */
6819 IPW2100_DEV_ID(0x2585), /* TO 2100 mPCI 3B */
6820 IPW2100_DEV_ID(0x2586), /* TO 2100 mPCI 3B */
6821 IPW2100_DEV_ID(0x2587), /* TO 2100 mPCI 3B */
6823 IPW2100_DEV_ID(0x2590), /* SO 2100A mPCI 3B */
6824 IPW2100_DEV_ID(0x2592), /* SO 2100A mPCI 3B */
6825 IPW2100_DEV_ID(0x2591), /* SO 2100 mPCI 3B */
6826 IPW2100_DEV_ID(0x2593), /* SO 2100 mPCI 3B */
6827 IPW2100_DEV_ID(0x2596), /* SO 2100 mPCI 3B */
6828 IPW2100_DEV_ID(0x2598), /* SO 2100 mPCI 3B */
6830 IPW2100_DEV_ID(0x25A0), /* HP 2100 mPCI 3B */
6834 MODULE_DEVICE_TABLE(pci, ipw2100_pci_id_table);
6836 static struct pci_driver ipw2100_pci_driver = {
6838 .id_table = ipw2100_pci_id_table,
6839 .probe = ipw2100_pci_init_one,
6840 .remove = __devexit_p(ipw2100_pci_remove_one),
6842 .suspend = ipw2100_suspend,
6843 .resume = ipw2100_resume,
6848 * Initialize the ipw2100 driver/module
6850 * @returns 0 if ok, < 0 errno node con error.
6852 * Note: we cannot init the /proc stuff until the PCI driver is there,
6853 * or we risk an unlikely race condition on someone accessing
6854 * uninitialized data in the PCI dev struct through /proc.
6856 static int __init ipw2100_init(void)
6860 printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
6861 printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
6863 ret = pci_module_init(&ipw2100_pci_driver);
6865 #ifdef CONFIG_IPW_DEBUG
6866 ipw2100_debug_level = debug;
6867 driver_create_file(&ipw2100_pci_driver.driver,
6868 &driver_attr_debug_level);
6875 * Cleanup ipw2100 driver registration
6877 static void __exit ipw2100_exit(void)
6879 /* FIXME: IPG: check that we have no instances of the devices open */
6880 #ifdef CONFIG_IPW_DEBUG
6881 driver_remove_file(&ipw2100_pci_driver.driver,
6882 &driver_attr_debug_level);
6884 pci_unregister_driver(&ipw2100_pci_driver);
6887 module_init(ipw2100_init);
6888 module_exit(ipw2100_exit);
6890 #define WEXT_USECHANNELS 1
6892 static const long ipw2100_frequencies[] = {
6893 2412, 2417, 2422, 2427,
6894 2432, 2437, 2442, 2447,
6895 2452, 2457, 2462, 2467,
6899 #define FREQ_COUNT (sizeof(ipw2100_frequencies) / \
6900 sizeof(ipw2100_frequencies[0]))
6902 static const long ipw2100_rates_11b[] = {
6909 #define RATE_COUNT (sizeof(ipw2100_rates_11b) / sizeof(ipw2100_rates_11b[0]))
6911 static int ipw2100_wx_get_name(struct net_device *dev,
6912 struct iw_request_info *info,
6913 union iwreq_data *wrqu, char *extra)
6916 * This can be called at any time. No action lock required
6919 struct ipw2100_priv *priv = ieee80211_priv(dev);
6920 if (!(priv->status & STATUS_ASSOCIATED))
6921 strcpy(wrqu->name, "unassociated");
6923 snprintf(wrqu->name, IFNAMSIZ, "IEEE 802.11b");
6925 IPW_DEBUG_WX("Name: %s\n", wrqu->name);
6929 static int ipw2100_wx_set_freq(struct net_device *dev,
6930 struct iw_request_info *info,
6931 union iwreq_data *wrqu, char *extra)
6933 struct ipw2100_priv *priv = ieee80211_priv(dev);
6934 struct iw_freq *fwrq = &wrqu->freq;
6937 if (priv->ieee->iw_mode == IW_MODE_INFRA)
6940 down(&priv->action_sem);
6941 if (!(priv->status & STATUS_INITIALIZED)) {
6946 /* if setting by freq convert to channel */
6948 if ((fwrq->m >= (int)2.412e8 && fwrq->m <= (int)2.487e8)) {
6949 int f = fwrq->m / 100000;
6952 while ((c < REG_MAX_CHANNEL) &&
6953 (f != ipw2100_frequencies[c]))
6956 /* hack to fall through */
6962 if (fwrq->e > 0 || fwrq->m > 1000) {
6965 } else { /* Set the channel */
6966 IPW_DEBUG_WX("SET Freq/Channel -> %d \n", fwrq->m);
6967 err = ipw2100_set_channel(priv, fwrq->m, 0);
6971 up(&priv->action_sem);
6975 static int ipw2100_wx_get_freq(struct net_device *dev,
6976 struct iw_request_info *info,
6977 union iwreq_data *wrqu, char *extra)
6980 * This can be called at any time. No action lock required
6983 struct ipw2100_priv *priv = ieee80211_priv(dev);
6987 /* If we are associated, trying to associate, or have a statically
6988 * configured CHANNEL then return that; otherwise return ANY */
6989 if (priv->config & CFG_STATIC_CHANNEL ||
6990 priv->status & STATUS_ASSOCIATED)
6991 wrqu->freq.m = priv->channel;
6995 IPW_DEBUG_WX("GET Freq/Channel -> %d \n", priv->channel);
7000 static int ipw2100_wx_set_mode(struct net_device *dev,
7001 struct iw_request_info *info,
7002 union iwreq_data *wrqu, char *extra)
7004 struct ipw2100_priv *priv = ieee80211_priv(dev);
7007 IPW_DEBUG_WX("SET Mode -> %d \n", wrqu->mode);
7009 if (wrqu->mode == priv->ieee->iw_mode)
7012 down(&priv->action_sem);
7013 if (!(priv->status & STATUS_INITIALIZED)) {
7018 switch (wrqu->mode) {
7019 #ifdef CONFIG_IPW2100_MONITOR
7020 case IW_MODE_MONITOR:
7021 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
7023 #endif /* CONFIG_IPW2100_MONITOR */
7025 err = ipw2100_switch_mode(priv, IW_MODE_ADHOC);
7030 err = ipw2100_switch_mode(priv, IW_MODE_INFRA);
7035 up(&priv->action_sem);
7039 static int ipw2100_wx_get_mode(struct net_device *dev,
7040 struct iw_request_info *info,
7041 union iwreq_data *wrqu, char *extra)
7044 * This can be called at any time. No action lock required
7047 struct ipw2100_priv *priv = ieee80211_priv(dev);
7049 wrqu->mode = priv->ieee->iw_mode;
7050 IPW_DEBUG_WX("GET Mode -> %d\n", wrqu->mode);
7055 #define POWER_MODES 5
7057 /* Values are in microsecond */
7058 static const s32 timeout_duration[POWER_MODES] = {
7066 static const s32 period_duration[POWER_MODES] = {
7074 static int ipw2100_wx_get_range(struct net_device *dev,
7075 struct iw_request_info *info,
7076 union iwreq_data *wrqu, char *extra)
7079 * This can be called at any time. No action lock required
7082 struct ipw2100_priv *priv = ieee80211_priv(dev);
7083 struct iw_range *range = (struct iw_range *)extra;
7087 wrqu->data.length = sizeof(*range);
7088 memset(range, 0, sizeof(*range));
7090 /* Let's try to keep this struct in the same order as in
7091 * linux/include/wireless.h
7094 /* TODO: See what values we can set, and remove the ones we can't
7095 * set, or fill them with some default data.
7098 /* ~5 Mb/s real (802.11b) */
7099 range->throughput = 5 * 1000 * 1000;
7101 // range->sensitivity; /* signal level threshold range */
7103 range->max_qual.qual = 100;
7104 /* TODO: Find real max RSSI and stick here */
7105 range->max_qual.level = 0;
7106 range->max_qual.noise = 0;
7107 range->max_qual.updated = 7; /* Updated all three */
7109 range->avg_qual.qual = 70; /* > 8% missed beacons is 'bad' */
7110 /* TODO: Find real 'good' to 'bad' threshol value for RSSI */
7111 range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
7112 range->avg_qual.noise = 0;
7113 range->avg_qual.updated = 7; /* Updated all three */
7115 range->num_bitrates = RATE_COUNT;
7117 for (i = 0; i < RATE_COUNT && i < IW_MAX_BITRATES; i++) {
7118 range->bitrate[i] = ipw2100_rates_11b[i];
7121 range->min_rts = MIN_RTS_THRESHOLD;
7122 range->max_rts = MAX_RTS_THRESHOLD;
7123 range->min_frag = MIN_FRAG_THRESHOLD;
7124 range->max_frag = MAX_FRAG_THRESHOLD;
7126 range->min_pmp = period_duration[0]; /* Minimal PM period */
7127 range->max_pmp = period_duration[POWER_MODES - 1]; /* Maximal PM period */
7128 range->min_pmt = timeout_duration[POWER_MODES - 1]; /* Minimal PM timeout */
7129 range->max_pmt = timeout_duration[0]; /* Maximal PM timeout */
7131 /* How to decode max/min PM period */
7132 range->pmp_flags = IW_POWER_PERIOD;
7133 /* How to decode max/min PM period */
7134 range->pmt_flags = IW_POWER_TIMEOUT;
7135 /* What PM options are supported */
7136 range->pm_capa = IW_POWER_TIMEOUT | IW_POWER_PERIOD;
7138 range->encoding_size[0] = 5;
7139 range->encoding_size[1] = 13; /* Different token sizes */
7140 range->num_encoding_sizes = 2; /* Number of entry in the list */
7141 range->max_encoding_tokens = WEP_KEYS; /* Max number of tokens */
7142 // range->encoding_login_index; /* token index for login token */
7144 if (priv->ieee->iw_mode == IW_MODE_ADHOC) {
7145 range->txpower_capa = IW_TXPOW_DBM;
7146 range->num_txpower = IW_MAX_TXPOWER;
7147 for (i = 0, level = (IPW_TX_POWER_MAX_DBM * 16);
7150 ((IPW_TX_POWER_MAX_DBM -
7151 IPW_TX_POWER_MIN_DBM) * 16) / (IW_MAX_TXPOWER - 1))
7152 range->txpower[i] = level / 16;
7154 range->txpower_capa = 0;
7155 range->num_txpower = 0;
7158 /* Set the Wireless Extension versions */
7159 range->we_version_compiled = WIRELESS_EXT;
7160 range->we_version_source = 16;
7162 // range->retry_capa; /* What retry options are supported */
7163 // range->retry_flags; /* How to decode max/min retry limit */
7164 // range->r_time_flags; /* How to decode max/min retry life */
7165 // range->min_retry; /* Minimal number of retries */
7166 // range->max_retry; /* Maximal number of retries */
7167 // range->min_r_time; /* Minimal retry lifetime */
7168 // range->max_r_time; /* Maximal retry lifetime */
7170 range->num_channels = FREQ_COUNT;
7173 for (i = 0; i < FREQ_COUNT; i++) {
7174 // TODO: Include only legal frequencies for some countries
7175 // if (local->channel_mask & (1 << i)) {
7176 range->freq[val].i = i + 1;
7177 range->freq[val].m = ipw2100_frequencies[i] * 100000;
7178 range->freq[val].e = 1;
7181 if (val == IW_MAX_FREQUENCIES)
7184 range->num_frequency = val;
7186 IPW_DEBUG_WX("GET Range\n");
7191 static int ipw2100_wx_set_wap(struct net_device *dev,
7192 struct iw_request_info *info,
7193 union iwreq_data *wrqu, char *extra)
7195 struct ipw2100_priv *priv = ieee80211_priv(dev);
7198 static const unsigned char any[] = {
7199 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
7201 static const unsigned char off[] = {
7202 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
7206 if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
7209 down(&priv->action_sem);
7210 if (!(priv->status & STATUS_INITIALIZED)) {
7215 if (!memcmp(any, wrqu->ap_addr.sa_data, ETH_ALEN) ||
7216 !memcmp(off, wrqu->ap_addr.sa_data, ETH_ALEN)) {
7217 /* we disable mandatory BSSID association */
7218 IPW_DEBUG_WX("exit - disable mandatory BSSID\n");
7219 priv->config &= ~CFG_STATIC_BSSID;
7220 err = ipw2100_set_mandatory_bssid(priv, NULL, 0);
7224 priv->config |= CFG_STATIC_BSSID;
7225 memcpy(priv->mandatory_bssid_mac, wrqu->ap_addr.sa_data, ETH_ALEN);
7227 err = ipw2100_set_mandatory_bssid(priv, wrqu->ap_addr.sa_data, 0);
7229 IPW_DEBUG_WX("SET BSSID -> %02X:%02X:%02X:%02X:%02X:%02X\n",
7230 wrqu->ap_addr.sa_data[0] & 0xff,
7231 wrqu->ap_addr.sa_data[1] & 0xff,
7232 wrqu->ap_addr.sa_data[2] & 0xff,
7233 wrqu->ap_addr.sa_data[3] & 0xff,
7234 wrqu->ap_addr.sa_data[4] & 0xff,
7235 wrqu->ap_addr.sa_data[5] & 0xff);
7238 up(&priv->action_sem);
7242 static int ipw2100_wx_get_wap(struct net_device *dev,
7243 struct iw_request_info *info,
7244 union iwreq_data *wrqu, char *extra)
7247 * This can be called at any time. No action lock required
7250 struct ipw2100_priv *priv = ieee80211_priv(dev);
7252 /* If we are associated, trying to associate, or have a statically
7253 * configured BSSID then return that; otherwise return ANY */
7254 if (priv->config & CFG_STATIC_BSSID || priv->status & STATUS_ASSOCIATED) {
7255 wrqu->ap_addr.sa_family = ARPHRD_ETHER;
7256 memcpy(wrqu->ap_addr.sa_data, priv->bssid, ETH_ALEN);
7258 memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
7260 IPW_DEBUG_WX("Getting WAP BSSID: " MAC_FMT "\n",
7261 MAC_ARG(wrqu->ap_addr.sa_data));
7265 static int ipw2100_wx_set_essid(struct net_device *dev,
7266 struct iw_request_info *info,
7267 union iwreq_data *wrqu, char *extra)
7269 struct ipw2100_priv *priv = ieee80211_priv(dev);
7270 char *essid = ""; /* ANY */
7274 down(&priv->action_sem);
7275 if (!(priv->status & STATUS_INITIALIZED)) {
7280 if (wrqu->essid.flags && wrqu->essid.length) {
7281 length = wrqu->essid.length - 1;
7286 IPW_DEBUG_WX("Setting ESSID to ANY\n");
7287 priv->config &= ~CFG_STATIC_ESSID;
7288 err = ipw2100_set_essid(priv, NULL, 0, 0);
7292 length = min(length, IW_ESSID_MAX_SIZE);
7294 priv->config |= CFG_STATIC_ESSID;
7296 if (priv->essid_len == length && !memcmp(priv->essid, extra, length)) {
7297 IPW_DEBUG_WX("ESSID set to current ESSID.\n");
7302 IPW_DEBUG_WX("Setting ESSID: '%s' (%d)\n", escape_essid(essid, length),
7305 priv->essid_len = length;
7306 memcpy(priv->essid, essid, priv->essid_len);
7308 err = ipw2100_set_essid(priv, essid, length, 0);
7311 up(&priv->action_sem);
7315 static int ipw2100_wx_get_essid(struct net_device *dev,
7316 struct iw_request_info *info,
7317 union iwreq_data *wrqu, char *extra)
7320 * This can be called at any time. No action lock required
7323 struct ipw2100_priv *priv = ieee80211_priv(dev);
7325 /* If we are associated, trying to associate, or have a statically
7326 * configured ESSID then return that; otherwise return ANY */
7327 if (priv->config & CFG_STATIC_ESSID || priv->status & STATUS_ASSOCIATED) {
7328 IPW_DEBUG_WX("Getting essid: '%s'\n",
7329 escape_essid(priv->essid, priv->essid_len));
7330 memcpy(extra, priv->essid, priv->essid_len);
7331 wrqu->essid.length = priv->essid_len;
7332 wrqu->essid.flags = 1; /* active */
7334 IPW_DEBUG_WX("Getting essid: ANY\n");
7335 wrqu->essid.length = 0;
7336 wrqu->essid.flags = 0; /* active */
7342 static int ipw2100_wx_set_nick(struct net_device *dev,
7343 struct iw_request_info *info,
7344 union iwreq_data *wrqu, char *extra)
7347 * This can be called at any time. No action lock required
7350 struct ipw2100_priv *priv = ieee80211_priv(dev);
7352 if (wrqu->data.length > IW_ESSID_MAX_SIZE)
7355 wrqu->data.length = min((size_t) wrqu->data.length, sizeof(priv->nick));
7356 memset(priv->nick, 0, sizeof(priv->nick));
7357 memcpy(priv->nick, extra, wrqu->data.length);
7359 IPW_DEBUG_WX("SET Nickname -> %s \n", priv->nick);
7364 static int ipw2100_wx_get_nick(struct net_device *dev,
7365 struct iw_request_info *info,
7366 union iwreq_data *wrqu, char *extra)
7369 * This can be called at any time. No action lock required
7372 struct ipw2100_priv *priv = ieee80211_priv(dev);
7374 wrqu->data.length = strlen(priv->nick) + 1;
7375 memcpy(extra, priv->nick, wrqu->data.length);
7376 wrqu->data.flags = 1; /* active */
7378 IPW_DEBUG_WX("GET Nickname -> %s \n", extra);
7383 static int ipw2100_wx_set_rate(struct net_device *dev,
7384 struct iw_request_info *info,
7385 union iwreq_data *wrqu, char *extra)
7387 struct ipw2100_priv *priv = ieee80211_priv(dev);
7388 u32 target_rate = wrqu->bitrate.value;
7392 down(&priv->action_sem);
7393 if (!(priv->status & STATUS_INITIALIZED)) {
7400 if (target_rate == 1000000 ||
7401 (!wrqu->bitrate.fixed && target_rate > 1000000))
7402 rate |= TX_RATE_1_MBIT;
7403 if (target_rate == 2000000 ||
7404 (!wrqu->bitrate.fixed && target_rate > 2000000))
7405 rate |= TX_RATE_2_MBIT;
7406 if (target_rate == 5500000 ||
7407 (!wrqu->bitrate.fixed && target_rate > 5500000))
7408 rate |= TX_RATE_5_5_MBIT;
7409 if (target_rate == 11000000 ||
7410 (!wrqu->bitrate.fixed && target_rate > 11000000))
7411 rate |= TX_RATE_11_MBIT;
7413 rate = DEFAULT_TX_RATES;
7415 err = ipw2100_set_tx_rates(priv, rate, 0);
7417 IPW_DEBUG_WX("SET Rate -> %04X \n", rate);
7419 up(&priv->action_sem);
7423 static int ipw2100_wx_get_rate(struct net_device *dev,
7424 struct iw_request_info *info,
7425 union iwreq_data *wrqu, char *extra)
7427 struct ipw2100_priv *priv = ieee80211_priv(dev);
7429 int len = sizeof(val);
7432 if (!(priv->status & STATUS_ENABLED) ||
7433 priv->status & STATUS_RF_KILL_MASK ||
7434 !(priv->status & STATUS_ASSOCIATED)) {
7435 wrqu->bitrate.value = 0;
7439 down(&priv->action_sem);
7440 if (!(priv->status & STATUS_INITIALIZED)) {
7445 err = ipw2100_get_ordinal(priv, IPW_ORD_CURRENT_TX_RATE, &val, &len);
7447 IPW_DEBUG_WX("failed querying ordinals.\n");
7451 switch (val & TX_RATE_MASK) {
7452 case TX_RATE_1_MBIT:
7453 wrqu->bitrate.value = 1000000;
7455 case TX_RATE_2_MBIT:
7456 wrqu->bitrate.value = 2000000;
7458 case TX_RATE_5_5_MBIT:
7459 wrqu->bitrate.value = 5500000;
7461 case TX_RATE_11_MBIT:
7462 wrqu->bitrate.value = 11000000;
7465 wrqu->bitrate.value = 0;
7468 IPW_DEBUG_WX("GET Rate -> %d \n", wrqu->bitrate.value);
7471 up(&priv->action_sem);
7475 static int ipw2100_wx_set_rts(struct net_device *dev,
7476 struct iw_request_info *info,
7477 union iwreq_data *wrqu, char *extra)
7479 struct ipw2100_priv *priv = ieee80211_priv(dev);
7482 /* Auto RTS not yet supported */
7483 if (wrqu->rts.fixed == 0)
7486 down(&priv->action_sem);
7487 if (!(priv->status & STATUS_INITIALIZED)) {
7492 if (wrqu->rts.disabled)
7493 value = priv->rts_threshold | RTS_DISABLED;
7495 if (wrqu->rts.value < 1 || wrqu->rts.value > 2304) {
7499 value = wrqu->rts.value;
7502 err = ipw2100_set_rts_threshold(priv, value);
7504 IPW_DEBUG_WX("SET RTS Threshold -> 0x%08X \n", value);
7506 up(&priv->action_sem);
7510 static int ipw2100_wx_get_rts(struct net_device *dev,
7511 struct iw_request_info *info,
7512 union iwreq_data *wrqu, char *extra)
7515 * This can be called at any time. No action lock required
7518 struct ipw2100_priv *priv = ieee80211_priv(dev);
7520 wrqu->rts.value = priv->rts_threshold & ~RTS_DISABLED;
7521 wrqu->rts.fixed = 1; /* no auto select */
7523 /* If RTS is set to the default value, then it is disabled */
7524 wrqu->rts.disabled = (priv->rts_threshold & RTS_DISABLED) ? 1 : 0;
7526 IPW_DEBUG_WX("GET RTS Threshold -> 0x%08X \n", wrqu->rts.value);
7531 static int ipw2100_wx_set_txpow(struct net_device *dev,
7532 struct iw_request_info *info,
7533 union iwreq_data *wrqu, char *extra)
7535 struct ipw2100_priv *priv = ieee80211_priv(dev);
7538 if (priv->ieee->iw_mode != IW_MODE_ADHOC)
7541 if (wrqu->txpower.disabled == 1 || wrqu->txpower.fixed == 0)
7542 value = IPW_TX_POWER_DEFAULT;
7544 if (wrqu->txpower.value < IPW_TX_POWER_MIN_DBM ||
7545 wrqu->txpower.value > IPW_TX_POWER_MAX_DBM)
7548 value = wrqu->txpower.value;
7551 down(&priv->action_sem);
7552 if (!(priv->status & STATUS_INITIALIZED)) {
7557 err = ipw2100_set_tx_power(priv, value);
7559 IPW_DEBUG_WX("SET TX Power -> %d \n", value);
7562 up(&priv->action_sem);
7566 static int ipw2100_wx_get_txpow(struct net_device *dev,
7567 struct iw_request_info *info,
7568 union iwreq_data *wrqu, char *extra)
7571 * This can be called at any time. No action lock required
7574 struct ipw2100_priv *priv = ieee80211_priv(dev);
7576 if (priv->ieee->iw_mode != IW_MODE_ADHOC) {
7577 wrqu->power.disabled = 1;
7581 if (priv->tx_power == IPW_TX_POWER_DEFAULT) {
7582 wrqu->power.fixed = 0;
7583 wrqu->power.value = IPW_TX_POWER_MAX_DBM;
7584 wrqu->power.disabled = 1;
7586 wrqu->power.disabled = 0;
7587 wrqu->power.fixed = 1;
7588 wrqu->power.value = priv->tx_power;
7591 wrqu->power.flags = IW_TXPOW_DBM;
7593 IPW_DEBUG_WX("GET TX Power -> %d \n", wrqu->power.value);
7598 static int ipw2100_wx_set_frag(struct net_device *dev,
7599 struct iw_request_info *info,
7600 union iwreq_data *wrqu, char *extra)
7603 * This can be called at any time. No action lock required
7606 struct ipw2100_priv *priv = ieee80211_priv(dev);
7608 if (!wrqu->frag.fixed)
7611 if (wrqu->frag.disabled) {
7612 priv->frag_threshold |= FRAG_DISABLED;
7613 priv->ieee->fts = DEFAULT_FTS;
7615 if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
7616 wrqu->frag.value > MAX_FRAG_THRESHOLD)
7619 priv->ieee->fts = wrqu->frag.value & ~0x1;
7620 priv->frag_threshold = priv->ieee->fts;
7623 IPW_DEBUG_WX("SET Frag Threshold -> %d \n", priv->ieee->fts);
7628 static int ipw2100_wx_get_frag(struct net_device *dev,
7629 struct iw_request_info *info,
7630 union iwreq_data *wrqu, char *extra)
7633 * This can be called at any time. No action lock required
7636 struct ipw2100_priv *priv = ieee80211_priv(dev);
7637 wrqu->frag.value = priv->frag_threshold & ~FRAG_DISABLED;
7638 wrqu->frag.fixed = 0; /* no auto select */
7639 wrqu->frag.disabled = (priv->frag_threshold & FRAG_DISABLED) ? 1 : 0;
7641 IPW_DEBUG_WX("GET Frag Threshold -> %d \n", wrqu->frag.value);
7646 static int ipw2100_wx_set_retry(struct net_device *dev,
7647 struct iw_request_info *info,
7648 union iwreq_data *wrqu, char *extra)
7650 struct ipw2100_priv *priv = ieee80211_priv(dev);
7653 if (wrqu->retry.flags & IW_RETRY_LIFETIME || wrqu->retry.disabled)
7656 if (!(wrqu->retry.flags & IW_RETRY_LIMIT))
7659 down(&priv->action_sem);
7660 if (!(priv->status & STATUS_INITIALIZED)) {
7665 if (wrqu->retry.flags & IW_RETRY_MIN) {
7666 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7667 IPW_DEBUG_WX("SET Short Retry Limit -> %d \n",
7672 if (wrqu->retry.flags & IW_RETRY_MAX) {
7673 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7674 IPW_DEBUG_WX("SET Long Retry Limit -> %d \n",
7679 err = ipw2100_set_short_retry(priv, wrqu->retry.value);
7681 err = ipw2100_set_long_retry(priv, wrqu->retry.value);
7683 IPW_DEBUG_WX("SET Both Retry Limits -> %d \n", wrqu->retry.value);
7686 up(&priv->action_sem);
7690 static int ipw2100_wx_get_retry(struct net_device *dev,
7691 struct iw_request_info *info,
7692 union iwreq_data *wrqu, char *extra)
7695 * This can be called at any time. No action lock required
7698 struct ipw2100_priv *priv = ieee80211_priv(dev);
7700 wrqu->retry.disabled = 0; /* can't be disabled */
7702 if ((wrqu->retry.flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME)
7705 if (wrqu->retry.flags & IW_RETRY_MAX) {
7706 wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
7707 wrqu->retry.value = priv->long_retry_limit;
7710 (priv->short_retry_limit !=
7711 priv->long_retry_limit) ?
7712 IW_RETRY_LIMIT | IW_RETRY_MIN : IW_RETRY_LIMIT;
7714 wrqu->retry.value = priv->short_retry_limit;
7717 IPW_DEBUG_WX("GET Retry -> %d \n", wrqu->retry.value);
7722 static int ipw2100_wx_set_scan(struct net_device *dev,
7723 struct iw_request_info *info,
7724 union iwreq_data *wrqu, char *extra)
7726 struct ipw2100_priv *priv = ieee80211_priv(dev);
7729 down(&priv->action_sem);
7730 if (!(priv->status & STATUS_INITIALIZED)) {
7735 IPW_DEBUG_WX("Initiating scan...\n");
7736 if (ipw2100_set_scan_options(priv) || ipw2100_start_scan(priv)) {
7737 IPW_DEBUG_WX("Start scan failed.\n");
7739 /* TODO: Mark a scan as pending so when hardware initialized
7744 up(&priv->action_sem);
7748 static int ipw2100_wx_get_scan(struct net_device *dev,
7749 struct iw_request_info *info,
7750 union iwreq_data *wrqu, char *extra)
7753 * This can be called at any time. No action lock required
7756 struct ipw2100_priv *priv = ieee80211_priv(dev);
7757 return ieee80211_wx_get_scan(priv->ieee, info, wrqu, extra);
7761 * Implementation based on code in hostap-driver v0.1.3 hostap_ioctl.c
7763 static int ipw2100_wx_set_encode(struct net_device *dev,
7764 struct iw_request_info *info,
7765 union iwreq_data *wrqu, char *key)
7768 * No check of STATUS_INITIALIZED required
7771 struct ipw2100_priv *priv = ieee80211_priv(dev);
7772 return ieee80211_wx_set_encode(priv->ieee, info, wrqu, key);
7775 static int ipw2100_wx_get_encode(struct net_device *dev,
7776 struct iw_request_info *info,
7777 union iwreq_data *wrqu, char *key)
7780 * This can be called at any time. No action lock required
7783 struct ipw2100_priv *priv = ieee80211_priv(dev);
7784 return ieee80211_wx_get_encode(priv->ieee, info, wrqu, key);
7787 static int ipw2100_wx_set_power(struct net_device *dev,
7788 struct iw_request_info *info,
7789 union iwreq_data *wrqu, char *extra)
7791 struct ipw2100_priv *priv = ieee80211_priv(dev);
7794 down(&priv->action_sem);
7795 if (!(priv->status & STATUS_INITIALIZED)) {
7800 if (wrqu->power.disabled) {
7801 priv->power_mode = IPW_POWER_LEVEL(priv->power_mode);
7802 err = ipw2100_set_power_mode(priv, IPW_POWER_MODE_CAM);
7803 IPW_DEBUG_WX("SET Power Management Mode -> off\n");
7807 switch (wrqu->power.flags & IW_POWER_MODE) {
7808 case IW_POWER_ON: /* If not specified */
7809 case IW_POWER_MODE: /* If set all mask */
7810 case IW_POWER_ALL_R: /* If explicitely state all */
7812 default: /* Otherwise we don't support it */
7813 IPW_DEBUG_WX("SET PM Mode: %X not supported.\n",
7819 /* If the user hasn't specified a power management mode yet, default
7821 priv->power_mode = IPW_POWER_ENABLED | priv->power_mode;
7822 err = ipw2100_set_power_mode(priv, IPW_POWER_LEVEL(priv->power_mode));
7824 IPW_DEBUG_WX("SET Power Management Mode -> 0x%02X\n", priv->power_mode);
7827 up(&priv->action_sem);
7832 static int ipw2100_wx_get_power(struct net_device *dev,
7833 struct iw_request_info *info,
7834 union iwreq_data *wrqu, char *extra)
7837 * This can be called at any time. No action lock required
7840 struct ipw2100_priv *priv = ieee80211_priv(dev);
7842 if (!(priv->power_mode & IPW_POWER_ENABLED))
7843 wrqu->power.disabled = 1;
7845 wrqu->power.disabled = 0;
7846 wrqu->power.flags = 0;
7849 IPW_DEBUG_WX("GET Power Management Mode -> %02X\n", priv->power_mode);
7854 #if WIRELESS_EXT > 17
7860 static int ipw2100_wx_set_genie(struct net_device *dev,
7861 struct iw_request_info *info,
7862 union iwreq_data *wrqu, char *extra)
7865 struct ipw2100_priv *priv = ieee80211_priv(dev);
7866 struct ieee80211_device *ieee = priv->ieee;
7869 if (!ieee->wpa_enabled)
7872 if (wrqu->data.length > MAX_WPA_IE_LEN ||
7873 (wrqu->data.length && extra == NULL))
7876 if (wrqu->data.length) {
7877 buf = kmalloc(wrqu->data.length, GFP_KERNEL);
7881 memcpy(buf, extra, wrqu->data.length);
7882 kfree(ieee->wpa_ie);
7884 ieee->wpa_ie_len = wrqu->data.length;
7886 kfree(ieee->wpa_ie);
7887 ieee->wpa_ie = NULL;
7888 ieee->wpa_ie_len = 0;
7891 ipw2100_wpa_assoc_frame(priv, ieee->wpa_ie, ieee->wpa_ie_len);
7897 static int ipw2100_wx_get_genie(struct net_device *dev,
7898 struct iw_request_info *info,
7899 union iwreq_data *wrqu, char *extra)
7901 struct ipw2100_priv *priv = ieee80211_priv(dev);
7902 struct ieee80211_device *ieee = priv->ieee;
7904 if (ieee->wpa_ie_len == 0 || ieee->wpa_ie == NULL) {
7905 wrqu->data.length = 0;
7909 if (wrqu->data.length < ieee->wpa_ie_len)
7912 wrqu->data.length = ieee->wpa_ie_len;
7913 memcpy(extra, ieee->wpa_ie, ieee->wpa_ie_len);
7919 static int ipw2100_wx_set_auth(struct net_device *dev,
7920 struct iw_request_info *info,
7921 union iwreq_data *wrqu, char *extra)
7923 struct ipw2100_priv *priv = ieee80211_priv(dev);
7924 struct ieee80211_device *ieee = priv->ieee;
7925 struct iw_param *param = &wrqu->param;
7926 struct ieee80211_crypt_data *crypt;
7927 unsigned long flags;
7930 switch (param->flags & IW_AUTH_INDEX) {
7931 case IW_AUTH_WPA_VERSION:
7932 case IW_AUTH_CIPHER_PAIRWISE:
7933 case IW_AUTH_CIPHER_GROUP:
7934 case IW_AUTH_KEY_MGMT:
7936 * ipw2200 does not use these parameters
7940 case IW_AUTH_TKIP_COUNTERMEASURES:
7941 crypt = priv->ieee->crypt[priv->ieee->tx_keyidx];
7942 if (!crypt || !crypt->ops->set_flags || !crypt->ops->get_flags) {
7943 IPW_DEBUG_WARNING("Can't set TKIP countermeasures: "
7944 "crypt not set!\n");
7948 flags = crypt->ops->get_flags(crypt->priv);
7951 flags |= IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7953 flags &= ~IEEE80211_CRYPTO_TKIP_COUNTERMEASURES;
7955 crypt->ops->set_flags(flags, crypt->priv);
7959 case IW_AUTH_DROP_UNENCRYPTED:{
7962 * wpa_supplicant calls set_wpa_enabled when the driver
7963 * is loaded and unloaded, regardless of if WPA is being
7964 * used. No other calls are made which can be used to
7965 * determine if encryption will be used or not prior to
7966 * association being expected. If encryption is not being
7967 * used, drop_unencrypted is set to false, else true -- we
7968 * can use this to determine if the CAP_PRIVACY_ON bit should
7971 struct ieee80211_security sec = {
7972 .flags = SEC_ENABLED,
7973 .enabled = param->value,
7975 priv->ieee->drop_unencrypted = param->value;
7976 /* We only change SEC_LEVEL for open mode. Others
7977 * are set by ipw_wpa_set_encryption.
7979 if (!param->value) {
7980 sec.flags |= SEC_LEVEL;
7981 sec.level = SEC_LEVEL_0;
7983 sec.flags |= SEC_LEVEL;
7984 sec.level = SEC_LEVEL_1;
7986 if (priv->ieee->set_security)
7987 priv->ieee->set_security(priv->ieee->dev, &sec);
7991 case IW_AUTH_80211_AUTH_ALG:
7992 ret = ipw2100_wpa_set_auth_algs(priv, param->value);
7995 case IW_AUTH_WPA_ENABLED:
7996 ret = ipw2100_wpa_enable(priv, param->value);
7999 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
8000 ieee->ieee802_1x = param->value;
8003 //case IW_AUTH_ROAMING_CONTROL:
8004 case IW_AUTH_PRIVACY_INVOKED:
8005 ieee->privacy_invoked = param->value;
8015 static int ipw2100_wx_get_auth(struct net_device *dev,
8016 struct iw_request_info *info,
8017 union iwreq_data *wrqu, char *extra)
8019 struct ipw2100_priv *priv = ieee80211_priv(dev);
8020 struct ieee80211_device *ieee = priv->ieee;
8021 struct ieee80211_crypt_data *crypt;
8022 struct iw_param *param = &wrqu->param;
8025 switch (param->flags & IW_AUTH_INDEX) {
8026 case IW_AUTH_WPA_VERSION:
8027 case IW_AUTH_CIPHER_PAIRWISE:
8028 case IW_AUTH_CIPHER_GROUP:
8029 case IW_AUTH_KEY_MGMT:
8031 * wpa_supplicant will control these internally
8036 case IW_AUTH_TKIP_COUNTERMEASURES:
8037 crypt = priv->ieee->crypt[priv->ieee->tx_keyidx];
8038 if (!crypt || !crypt->ops->get_flags) {
8039 IPW_DEBUG_WARNING("Can't get TKIP countermeasures: "
8040 "crypt not set!\n");
8044 param->value = (crypt->ops->get_flags(crypt->priv) &
8045 IEEE80211_CRYPTO_TKIP_COUNTERMEASURES) ? 1 : 0;
8049 case IW_AUTH_DROP_UNENCRYPTED:
8050 param->value = ieee->drop_unencrypted;
8053 case IW_AUTH_80211_AUTH_ALG:
8054 param->value = priv->ieee->sec.auth_mode;
8057 case IW_AUTH_WPA_ENABLED:
8058 param->value = ieee->wpa_enabled;
8061 case IW_AUTH_RX_UNENCRYPTED_EAPOL:
8062 param->value = ieee->ieee802_1x;
8065 case IW_AUTH_ROAMING_CONTROL:
8066 case IW_AUTH_PRIVACY_INVOKED:
8067 param->value = ieee->privacy_invoked;
8076 /* SIOCSIWENCODEEXT */
8077 static int ipw2100_wx_set_encodeext(struct net_device *dev,
8078 struct iw_request_info *info,
8079 union iwreq_data *wrqu, char *extra)
8081 struct ipw2100_priv *priv = ieee80211_priv(dev);
8082 return ieee80211_wx_set_encodeext(priv->ieee, info, wrqu, extra);
8085 /* SIOCGIWENCODEEXT */
8086 static int ipw2100_wx_get_encodeext(struct net_device *dev,
8087 struct iw_request_info *info,
8088 union iwreq_data *wrqu, char *extra)
8090 struct ipw2100_priv *priv = ieee80211_priv(dev);
8091 return ieee80211_wx_get_encodeext(priv->ieee, info, wrqu, extra);
8095 static int ipw2100_wx_set_mlme(struct net_device *dev,
8096 struct iw_request_info *info,
8097 union iwreq_data *wrqu, char *extra)
8099 struct ipw2100_priv *priv = ieee80211_priv(dev);
8100 struct iw_mlme *mlme = (struct iw_mlme *)extra;
8103 reason = cpu_to_le16(mlme->reason_code);
8105 switch (mlme->cmd) {
8106 case IW_MLME_DEAUTH:
8110 case IW_MLME_DISASSOC:
8111 ipw2100_disassociate_bssid(priv);
8119 #endif /* WIRELESS_EXT > 17 */
8126 #ifdef CONFIG_IPW2100_MONITOR
8127 static int ipw2100_wx_set_promisc(struct net_device *dev,
8128 struct iw_request_info *info,
8129 union iwreq_data *wrqu, char *extra)
8131 struct ipw2100_priv *priv = ieee80211_priv(dev);
8132 int *parms = (int *)extra;
8133 int enable = (parms[0] > 0);
8136 down(&priv->action_sem);
8137 if (!(priv->status & STATUS_INITIALIZED)) {
8143 if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
8144 err = ipw2100_set_channel(priv, parms[1], 0);
8147 priv->channel = parms[1];
8148 err = ipw2100_switch_mode(priv, IW_MODE_MONITOR);
8150 if (priv->ieee->iw_mode == IW_MODE_MONITOR)
8151 err = ipw2100_switch_mode(priv, priv->last_mode);
8154 up(&priv->action_sem);
8158 static int ipw2100_wx_reset(struct net_device *dev,
8159 struct iw_request_info *info,
8160 union iwreq_data *wrqu, char *extra)
8162 struct ipw2100_priv *priv = ieee80211_priv(dev);
8163 if (priv->status & STATUS_INITIALIZED)
8164 schedule_reset(priv);
8170 static int ipw2100_wx_set_powermode(struct net_device *dev,
8171 struct iw_request_info *info,
8172 union iwreq_data *wrqu, char *extra)
8174 struct ipw2100_priv *priv = ieee80211_priv(dev);
8175 int err = 0, mode = *(int *)extra;
8177 down(&priv->action_sem);
8178 if (!(priv->status & STATUS_INITIALIZED)) {
8183 if ((mode < 1) || (mode > POWER_MODES))
8184 mode = IPW_POWER_AUTO;
8186 if (priv->power_mode != mode)
8187 err = ipw2100_set_power_mode(priv, mode);
8189 up(&priv->action_sem);
8193 #define MAX_POWER_STRING 80
8194 static int ipw2100_wx_get_powermode(struct net_device *dev,
8195 struct iw_request_info *info,
8196 union iwreq_data *wrqu, char *extra)
8199 * This can be called at any time. No action lock required
8202 struct ipw2100_priv *priv = ieee80211_priv(dev);
8203 int level = IPW_POWER_LEVEL(priv->power_mode);
8204 s32 timeout, period;
8206 if (!(priv->power_mode & IPW_POWER_ENABLED)) {
8207 snprintf(extra, MAX_POWER_STRING,
8208 "Power save level: %d (Off)", level);
8211 case IPW_POWER_MODE_CAM:
8212 snprintf(extra, MAX_POWER_STRING,
8213 "Power save level: %d (None)", level);
8215 case IPW_POWER_AUTO:
8216 snprintf(extra, MAX_POWER_STRING,
8217 "Power save level: %d (Auto)", 0);
8220 timeout = timeout_duration[level - 1] / 1000;
8221 period = period_duration[level - 1] / 1000;
8222 snprintf(extra, MAX_POWER_STRING,
8223 "Power save level: %d "
8224 "(Timeout %dms, Period %dms)",
8225 level, timeout, period);
8229 wrqu->data.length = strlen(extra) + 1;
8234 static int ipw2100_wx_set_preamble(struct net_device *dev,
8235 struct iw_request_info *info,
8236 union iwreq_data *wrqu, char *extra)
8238 struct ipw2100_priv *priv = ieee80211_priv(dev);
8239 int err, mode = *(int *)extra;
8241 down(&priv->action_sem);
8242 if (!(priv->status & STATUS_INITIALIZED)) {
8248 priv->config |= CFG_LONG_PREAMBLE;
8250 priv->config &= ~CFG_LONG_PREAMBLE;
8256 err = ipw2100_system_config(priv, 0);
8259 up(&priv->action_sem);
8263 static int ipw2100_wx_get_preamble(struct net_device *dev,
8264 struct iw_request_info *info,
8265 union iwreq_data *wrqu, char *extra)
8268 * This can be called at any time. No action lock required
8271 struct ipw2100_priv *priv = ieee80211_priv(dev);
8273 if (priv->config & CFG_LONG_PREAMBLE)
8274 snprintf(wrqu->name, IFNAMSIZ, "long (1)");
8276 snprintf(wrqu->name, IFNAMSIZ, "auto (0)");
8281 #ifdef CONFIG_IPW2100_MONITOR
8282 static int ipw2100_wx_set_crc_check(struct net_device *dev,
8283 struct iw_request_info *info,
8284 union iwreq_data *wrqu, char *extra)
8286 struct ipw2100_priv *priv = ieee80211_priv(dev);
8287 int err, mode = *(int *)extra;
8289 down(&priv->action_sem);
8290 if (!(priv->status & STATUS_INITIALIZED)) {
8296 priv->config |= CFG_CRC_CHECK;
8298 priv->config &= ~CFG_CRC_CHECK;
8306 up(&priv->action_sem);
8310 static int ipw2100_wx_get_crc_check(struct net_device *dev,
8311 struct iw_request_info *info,
8312 union iwreq_data *wrqu, char *extra)
8315 * This can be called at any time. No action lock required
8318 struct ipw2100_priv *priv = ieee80211_priv(dev);
8320 if (priv->config & CFG_CRC_CHECK)
8321 snprintf(wrqu->name, IFNAMSIZ, "CRC checked (1)");
8323 snprintf(wrqu->name, IFNAMSIZ, "CRC ignored (0)");
8327 #endif /* CONFIG_IPW2100_MONITOR */
8329 static iw_handler ipw2100_wx_handlers[] = {
8330 NULL, /* SIOCSIWCOMMIT */
8331 ipw2100_wx_get_name, /* SIOCGIWNAME */
8332 NULL, /* SIOCSIWNWID */
8333 NULL, /* SIOCGIWNWID */
8334 ipw2100_wx_set_freq, /* SIOCSIWFREQ */
8335 ipw2100_wx_get_freq, /* SIOCGIWFREQ */
8336 ipw2100_wx_set_mode, /* SIOCSIWMODE */
8337 ipw2100_wx_get_mode, /* SIOCGIWMODE */
8338 NULL, /* SIOCSIWSENS */
8339 NULL, /* SIOCGIWSENS */
8340 NULL, /* SIOCSIWRANGE */
8341 ipw2100_wx_get_range, /* SIOCGIWRANGE */
8342 NULL, /* SIOCSIWPRIV */
8343 NULL, /* SIOCGIWPRIV */
8344 NULL, /* SIOCSIWSTATS */
8345 NULL, /* SIOCGIWSTATS */
8346 NULL, /* SIOCSIWSPY */
8347 NULL, /* SIOCGIWSPY */
8348 NULL, /* SIOCGIWTHRSPY */
8349 NULL, /* SIOCWIWTHRSPY */
8350 ipw2100_wx_set_wap, /* SIOCSIWAP */
8351 ipw2100_wx_get_wap, /* SIOCGIWAP */
8352 #if WIRELESS_EXT > 17
8353 ipw2100_wx_set_mlme, /* SIOCSIWMLME */
8355 NULL, /* -- hole -- */
8357 NULL, /* SIOCGIWAPLIST -- deprecated */
8358 ipw2100_wx_set_scan, /* SIOCSIWSCAN */
8359 ipw2100_wx_get_scan, /* SIOCGIWSCAN */
8360 ipw2100_wx_set_essid, /* SIOCSIWESSID */
8361 ipw2100_wx_get_essid, /* SIOCGIWESSID */
8362 ipw2100_wx_set_nick, /* SIOCSIWNICKN */
8363 ipw2100_wx_get_nick, /* SIOCGIWNICKN */
8364 NULL, /* -- hole -- */
8365 NULL, /* -- hole -- */
8366 ipw2100_wx_set_rate, /* SIOCSIWRATE */
8367 ipw2100_wx_get_rate, /* SIOCGIWRATE */
8368 ipw2100_wx_set_rts, /* SIOCSIWRTS */
8369 ipw2100_wx_get_rts, /* SIOCGIWRTS */
8370 ipw2100_wx_set_frag, /* SIOCSIWFRAG */
8371 ipw2100_wx_get_frag, /* SIOCGIWFRAG */
8372 ipw2100_wx_set_txpow, /* SIOCSIWTXPOW */
8373 ipw2100_wx_get_txpow, /* SIOCGIWTXPOW */
8374 ipw2100_wx_set_retry, /* SIOCSIWRETRY */
8375 ipw2100_wx_get_retry, /* SIOCGIWRETRY */
8376 ipw2100_wx_set_encode, /* SIOCSIWENCODE */
8377 ipw2100_wx_get_encode, /* SIOCGIWENCODE */
8378 ipw2100_wx_set_power, /* SIOCSIWPOWER */
8379 ipw2100_wx_get_power, /* SIOCGIWPOWER */
8380 #if WIRELESS_EXT > 17
8381 NULL, /* -- hole -- */
8382 NULL, /* -- hole -- */
8383 ipw2100_wx_set_genie, /* SIOCSIWGENIE */
8384 ipw2100_wx_get_genie, /* SIOCGIWGENIE */
8385 ipw2100_wx_set_auth, /* SIOCSIWAUTH */
8386 ipw2100_wx_get_auth, /* SIOCGIWAUTH */
8387 ipw2100_wx_set_encodeext, /* SIOCSIWENCODEEXT */
8388 ipw2100_wx_get_encodeext, /* SIOCGIWENCODEEXT */
8389 NULL, /* SIOCSIWPMKSA */
8393 #define IPW2100_PRIV_SET_MONITOR SIOCIWFIRSTPRIV
8394 #define IPW2100_PRIV_RESET SIOCIWFIRSTPRIV+1
8395 #define IPW2100_PRIV_SET_POWER SIOCIWFIRSTPRIV+2
8396 #define IPW2100_PRIV_GET_POWER SIOCIWFIRSTPRIV+3
8397 #define IPW2100_PRIV_SET_LONGPREAMBLE SIOCIWFIRSTPRIV+4
8398 #define IPW2100_PRIV_GET_LONGPREAMBLE SIOCIWFIRSTPRIV+5
8399 #define IPW2100_PRIV_SET_CRC_CHECK SIOCIWFIRSTPRIV+6
8400 #define IPW2100_PRIV_GET_CRC_CHECK SIOCIWFIRSTPRIV+7
8402 static const struct iw_priv_args ipw2100_private_args[] = {
8404 #ifdef CONFIG_IPW2100_MONITOR
8406 IPW2100_PRIV_SET_MONITOR,
8407 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 2, 0, "monitor"},
8410 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 0, 0, "reset"},
8411 #endif /* CONFIG_IPW2100_MONITOR */
8414 IPW2100_PRIV_SET_POWER,
8415 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_power"},
8417 IPW2100_PRIV_GET_POWER,
8418 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | MAX_POWER_STRING,
8421 IPW2100_PRIV_SET_LONGPREAMBLE,
8422 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_preamble"},
8424 IPW2100_PRIV_GET_LONGPREAMBLE,
8425 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_preamble"},
8426 #ifdef CONFIG_IPW2100_MONITOR
8428 IPW2100_PRIV_SET_CRC_CHECK,
8429 IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "set_crc_check"},
8431 IPW2100_PRIV_GET_CRC_CHECK,
8432 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | IFNAMSIZ, "get_crc_check"},
8433 #endif /* CONFIG_IPW2100_MONITOR */
8436 static iw_handler ipw2100_private_handler[] = {
8437 #ifdef CONFIG_IPW2100_MONITOR
8438 ipw2100_wx_set_promisc,
8440 #else /* CONFIG_IPW2100_MONITOR */
8443 #endif /* CONFIG_IPW2100_MONITOR */
8444 ipw2100_wx_set_powermode,
8445 ipw2100_wx_get_powermode,
8446 ipw2100_wx_set_preamble,
8447 ipw2100_wx_get_preamble,
8448 #ifdef CONFIG_IPW2100_MONITOR
8449 ipw2100_wx_set_crc_check,
8450 ipw2100_wx_get_crc_check,
8451 #else /* CONFIG_IPW2100_MONITOR */
8454 #endif /* CONFIG_IPW2100_MONITOR */
8457 static struct iw_handler_def ipw2100_wx_handler_def = {
8458 .standard = ipw2100_wx_handlers,
8459 .num_standard = sizeof(ipw2100_wx_handlers) / sizeof(iw_handler),
8460 .num_private = sizeof(ipw2100_private_handler) / sizeof(iw_handler),
8461 .num_private_args = sizeof(ipw2100_private_args) /
8462 sizeof(struct iw_priv_args),
8463 .private = (iw_handler *) ipw2100_private_handler,
8464 .private_args = (struct iw_priv_args *)ipw2100_private_args,
8468 * Get wireless statistics.
8469 * Called by /proc/net/wireless
8470 * Also called by SIOCGIWSTATS
8472 static struct iw_statistics *ipw2100_wx_wireless_stats(struct net_device *dev)
8486 struct ipw2100_priv *priv = ieee80211_priv(dev);
8487 struct iw_statistics *wstats;
8488 u32 rssi, quality, tx_retries, missed_beacons, tx_failures;
8489 u32 ord_len = sizeof(u32);
8492 return (struct iw_statistics *)NULL;
8494 wstats = &priv->wstats;
8496 /* if hw is disabled, then ipw2100_get_ordinal() can't be called.
8497 * ipw2100_wx_wireless_stats seems to be called before fw is
8498 * initialized. STATUS_ASSOCIATED will only be set if the hw is up
8499 * and associated; if not associcated, the values are all meaningless
8500 * anyway, so set them all to NULL and INVALID */
8501 if (!(priv->status & STATUS_ASSOCIATED)) {
8502 wstats->miss.beacon = 0;
8503 wstats->discard.retries = 0;
8504 wstats->qual.qual = 0;
8505 wstats->qual.level = 0;
8506 wstats->qual.noise = 0;
8507 wstats->qual.updated = 7;
8508 wstats->qual.updated |= IW_QUAL_NOISE_INVALID |
8509 IW_QUAL_QUAL_INVALID | IW_QUAL_LEVEL_INVALID;
8513 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_MISSED_BCNS,
8514 &missed_beacons, &ord_len))
8515 goto fail_get_ordinal;
8517 /* If we don't have a connection the quality and level is 0 */
8518 if (!(priv->status & STATUS_ASSOCIATED)) {
8519 wstats->qual.qual = 0;
8520 wstats->qual.level = 0;
8522 if (ipw2100_get_ordinal(priv, IPW_ORD_RSSI_AVG_CURR,
8524 goto fail_get_ordinal;
8525 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8527 rssi_qual = rssi * POOR / 10;
8529 rssi_qual = (rssi - 10) * (FAIR - POOR) / 5 + POOR;
8531 rssi_qual = (rssi - 15) * (GOOD - FAIR) / 5 + FAIR;
8533 rssi_qual = (rssi - 20) * (VERY_GOOD - GOOD) /
8536 rssi_qual = (rssi - 30) * (PERFECT - VERY_GOOD) /
8539 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_PERCENT_RETRIES,
8540 &tx_retries, &ord_len))
8541 goto fail_get_ordinal;
8543 if (tx_retries > 75)
8544 tx_qual = (90 - tx_retries) * POOR / 15;
8545 else if (tx_retries > 70)
8546 tx_qual = (75 - tx_retries) * (FAIR - POOR) / 5 + POOR;
8547 else if (tx_retries > 65)
8548 tx_qual = (70 - tx_retries) * (GOOD - FAIR) / 5 + FAIR;
8549 else if (tx_retries > 50)
8550 tx_qual = (65 - tx_retries) * (VERY_GOOD - GOOD) /
8553 tx_qual = (50 - tx_retries) *
8554 (PERFECT - VERY_GOOD) / 50 + VERY_GOOD;
8556 if (missed_beacons > 50)
8557 beacon_qual = (60 - missed_beacons) * POOR / 10;
8558 else if (missed_beacons > 40)
8559 beacon_qual = (50 - missed_beacons) * (FAIR - POOR) /
8561 else if (missed_beacons > 32)
8562 beacon_qual = (40 - missed_beacons) * (GOOD - FAIR) /
8564 else if (missed_beacons > 20)
8565 beacon_qual = (32 - missed_beacons) *
8566 (VERY_GOOD - GOOD) / 20 + GOOD;
8568 beacon_qual = (20 - missed_beacons) *
8569 (PERFECT - VERY_GOOD) / 20 + VERY_GOOD;
8571 quality = min(beacon_qual, min(tx_qual, rssi_qual));
8573 #ifdef CONFIG_IPW_DEBUG
8574 if (beacon_qual == quality)
8575 IPW_DEBUG_WX("Quality clamped by Missed Beacons\n");
8576 else if (tx_qual == quality)
8577 IPW_DEBUG_WX("Quality clamped by Tx Retries\n");
8578 else if (quality != 100)
8579 IPW_DEBUG_WX("Quality clamped by Signal Strength\n");
8581 IPW_DEBUG_WX("Quality not clamped.\n");
8584 wstats->qual.qual = quality;
8585 wstats->qual.level = rssi + IPW2100_RSSI_TO_DBM;
8588 wstats->qual.noise = 0;
8589 wstats->qual.updated = 7;
8590 wstats->qual.updated |= IW_QUAL_NOISE_INVALID;
8592 /* FIXME: this is percent and not a # */
8593 wstats->miss.beacon = missed_beacons;
8595 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_TX_FAILURES,
8596 &tx_failures, &ord_len))
8597 goto fail_get_ordinal;
8598 wstats->discard.retries = tx_failures;
8603 IPW_DEBUG_WX("failed querying ordinals.\n");
8605 return (struct iw_statistics *)NULL;
8608 static void ipw2100_wx_event_work(struct ipw2100_priv *priv)
8610 union iwreq_data wrqu;
8613 if (priv->status & STATUS_STOPPING)
8616 down(&priv->action_sem);
8618 IPW_DEBUG_WX("enter\n");
8620 up(&priv->action_sem);
8622 wrqu.ap_addr.sa_family = ARPHRD_ETHER;
8624 /* Fetch BSSID from the hardware */
8625 if (!(priv->status & (STATUS_ASSOCIATING | STATUS_ASSOCIATED)) ||
8626 priv->status & STATUS_RF_KILL_MASK ||
8627 ipw2100_get_ordinal(priv, IPW_ORD_STAT_ASSN_AP_BSSID,
8628 &priv->bssid, &len)) {
8629 memset(wrqu.ap_addr.sa_data, 0, ETH_ALEN);
8631 /* We now have the BSSID, so can finish setting to the full
8632 * associated state */
8633 memcpy(wrqu.ap_addr.sa_data, priv->bssid, ETH_ALEN);
8634 memcpy(priv->ieee->bssid, priv->bssid, ETH_ALEN);
8635 priv->status &= ~STATUS_ASSOCIATING;
8636 priv->status |= STATUS_ASSOCIATED;
8637 netif_carrier_on(priv->net_dev);
8638 netif_wake_queue(priv->net_dev);
8641 if (!(priv->status & STATUS_ASSOCIATED)) {
8642 IPW_DEBUG_WX("Configuring ESSID\n");
8643 down(&priv->action_sem);
8644 /* This is a disassociation event, so kick the firmware to
8645 * look for another AP */
8646 if (priv->config & CFG_STATIC_ESSID)
8647 ipw2100_set_essid(priv, priv->essid, priv->essid_len,
8650 ipw2100_set_essid(priv, NULL, 0, 0);
8651 up(&priv->action_sem);
8654 wireless_send_event(priv->net_dev, SIOCGIWAP, &wrqu, NULL);
8657 #define IPW2100_FW_MAJOR_VERSION 1
8658 #define IPW2100_FW_MINOR_VERSION 3
8660 #define IPW2100_FW_MINOR(x) ((x & 0xff) >> 8)
8661 #define IPW2100_FW_MAJOR(x) (x & 0xff)
8663 #define IPW2100_FW_VERSION ((IPW2100_FW_MINOR_VERSION << 8) | \
8664 IPW2100_FW_MAJOR_VERSION)
8666 #define IPW2100_FW_PREFIX "ipw2100-" __stringify(IPW2100_FW_MAJOR_VERSION) \
8667 "." __stringify(IPW2100_FW_MINOR_VERSION)
8669 #define IPW2100_FW_NAME(x) IPW2100_FW_PREFIX "" x ".fw"
8673 BINARY FIRMWARE HEADER FORMAT
8677 2 2 mode == 0:BSS,1:IBSS,2:MONITOR
8680 C fw_len firmware data
8681 12 + fw_len uc_len microcode data
8685 struct ipw2100_fw_header {
8688 unsigned int fw_size;
8689 unsigned int uc_size;
8690 } __attribute__ ((packed));
8692 static int ipw2100_mod_firmware_load(struct ipw2100_fw *fw)
8694 struct ipw2100_fw_header *h =
8695 (struct ipw2100_fw_header *)fw->fw_entry->data;
8697 if (IPW2100_FW_MAJOR(h->version) != IPW2100_FW_MAJOR_VERSION) {
8698 printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
8699 "(detected version id of %u). "
8700 "See Documentation/networking/README.ipw2100\n",
8705 fw->version = h->version;
8706 fw->fw.data = fw->fw_entry->data + sizeof(struct ipw2100_fw_header);
8707 fw->fw.size = h->fw_size;
8708 fw->uc.data = fw->fw.data + h->fw_size;
8709 fw->uc.size = h->uc_size;
8714 static int ipw2100_get_firmware(struct ipw2100_priv *priv,
8715 struct ipw2100_fw *fw)
8720 IPW_DEBUG_INFO("%s: Using hotplug firmware load.\n",
8721 priv->net_dev->name);
8723 switch (priv->ieee->iw_mode) {
8725 fw_name = IPW2100_FW_NAME("-i");
8727 #ifdef CONFIG_IPW2100_MONITOR
8728 case IW_MODE_MONITOR:
8729 fw_name = IPW2100_FW_NAME("-p");
8734 fw_name = IPW2100_FW_NAME("");
8738 rc = request_firmware(&fw->fw_entry, fw_name, &priv->pci_dev->dev);
8741 printk(KERN_ERR DRV_NAME ": "
8742 "%s: Firmware '%s' not available or load failed.\n",
8743 priv->net_dev->name, fw_name);
8746 IPW_DEBUG_INFO("firmware data %p size %zd\n", fw->fw_entry->data,
8747 fw->fw_entry->size);
8749 ipw2100_mod_firmware_load(fw);
8754 static void ipw2100_release_firmware(struct ipw2100_priv *priv,
8755 struct ipw2100_fw *fw)
8759 release_firmware(fw->fw_entry);
8760 fw->fw_entry = NULL;
8763 static int ipw2100_get_fwversion(struct ipw2100_priv *priv, char *buf,
8766 char ver[MAX_FW_VERSION_LEN];
8767 u32 len = MAX_FW_VERSION_LEN;
8770 /* firmware version is an ascii string (max len of 14) */
8771 if (ipw2100_get_ordinal(priv, IPW_ORD_STAT_FW_VER_NUM, ver, &len))
8776 for (i = 0; i < len; i++)
8782 static int ipw2100_get_ucodeversion(struct ipw2100_priv *priv, char *buf,
8786 u32 len = sizeof(ver);
8787 /* microcode version is a 32 bit integer */
8788 if (ipw2100_get_ordinal(priv, IPW_ORD_UCODE_VERSION, &ver, &len))
8790 return snprintf(buf, max, "%08X", ver);
8794 * On exit, the firmware will have been freed from the fw list
8796 static int ipw2100_fw_download(struct ipw2100_priv *priv, struct ipw2100_fw *fw)
8798 /* firmware is constructed of N contiguous entries, each entry is
8802 * 0 4 address to write to
8803 * 4 2 length of data run
8809 const unsigned char *firmware_data = fw->fw.data;
8810 unsigned int firmware_data_left = fw->fw.size;
8812 while (firmware_data_left > 0) {
8813 addr = *(u32 *) (firmware_data);
8815 firmware_data_left -= 4;
8817 len = *(u16 *) (firmware_data);
8819 firmware_data_left -= 2;
8822 printk(KERN_ERR DRV_NAME ": "
8823 "Invalid firmware run-length of %d bytes\n",
8828 write_nic_memory(priv->net_dev, addr, len, firmware_data);
8829 firmware_data += len;
8830 firmware_data_left -= len;
8836 struct symbol_alive_response {
8845 u16 clock_settle_time; // 1us LSB
8846 u16 powerup_settle_time; // 1us LSB
8847 u16 hop_settle_time; // 1us LSB
8848 u8 date[3]; // month, day, year
8849 u8 time[2]; // hours, minutes
8853 static int ipw2100_ucode_download(struct ipw2100_priv *priv,
8854 struct ipw2100_fw *fw)
8856 struct net_device *dev = priv->net_dev;
8857 const unsigned char *microcode_data = fw->uc.data;
8858 unsigned int microcode_data_left = fw->uc.size;
8859 void __iomem *reg = (void __iomem *)dev->base_addr;
8861 struct symbol_alive_response response;
8865 /* Symbol control */
8866 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8868 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8872 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8874 write_nic_byte(dev, 0x210014, 0x72); /* fifo width =16 */
8877 /* EN_CS_ACCESS bit to reset control store pointer */
8878 write_nic_byte(dev, 0x210000, 0x40);
8880 write_nic_byte(dev, 0x210000, 0x0);
8882 write_nic_byte(dev, 0x210000, 0x40);
8885 /* copy microcode from buffer into Symbol */
8887 while (microcode_data_left > 0) {
8888 write_nic_byte(dev, 0x210010, *microcode_data++);
8889 write_nic_byte(dev, 0x210010, *microcode_data++);
8890 microcode_data_left -= 2;
8893 /* EN_CS_ACCESS bit to reset the control store pointer */
8894 write_nic_byte(dev, 0x210000, 0x0);
8897 /* Enable System (Reg 0)
8898 * first enable causes garbage in RX FIFO */
8899 write_nic_byte(dev, 0x210000, 0x0);
8901 write_nic_byte(dev, 0x210000, 0x80);
8904 /* Reset External Baseband Reg */
8905 write_nic_word(dev, IPW2100_CONTROL_REG, 0x703);
8907 write_nic_word(dev, IPW2100_CONTROL_REG, 0x707);
8910 /* HW Config (Reg 5) */
8911 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8913 write_nic_byte(dev, 0x210014, 0x72); // fifo width =16
8916 /* Enable System (Reg 0)
8917 * second enable should be OK */
8918 write_nic_byte(dev, 0x210000, 0x00); // clear enable system
8920 write_nic_byte(dev, 0x210000, 0x80); // set enable system
8922 /* check Symbol is enabled - upped this from 5 as it wasn't always
8923 * catching the update */
8924 for (i = 0; i < 10; i++) {
8927 /* check Dino is enabled bit */
8928 read_nic_byte(dev, 0x210000, &data);
8934 printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
8939 /* Get Symbol alive response */
8940 for (i = 0; i < 30; i++) {
8941 /* Read alive response structure */
8943 j < (sizeof(struct symbol_alive_response) >> 1); j++)
8944 read_nic_word(dev, 0x210004, ((u16 *) & response) + j);
8946 if ((response.cmd_id == 1) && (response.ucode_valid == 0x1))
8952 printk(KERN_ERR DRV_NAME
8953 ": %s: No response from Symbol - hw not alive\n",
8955 printk_buf(IPW_DL_ERROR, (u8 *) & response, sizeof(response));