git.oblomov.eu Git - linux-2.6/blob - drivers/video/w100fb.c

   1 /*
   2  * linux/drivers/video/w100fb.c
   3  *
   4  * Frame Buffer Device for ATI Imageon w100 (Wallaby)
   5  *
   6  * Copyright (C) 2002, ATI Corp.
   7  * Copyright (C) 2004-2006 Richard Purdie
   8  * Copyright (c) 2005 Ian Molton
   9  * Copyright (c) 2006 Alberto Mardegan
  10  *
  11  * Rewritten for 2.6 by Richard Purdie <rpurdie@rpsys.net>
  12  *
  13  * Generic platform support by Ian Molton <spyro@f2s.com>
  14  * and Richard Purdie <rpurdie@rpsys.net>
  15  *
  16  * w32xx support by Ian Molton
  17  *
  18  * Hardware acceleration support by Alberto Mardegan
  19  * <mardy@users.sourceforge.net>
  20  *
  21  * This program is free software; you can redistribute it and/or modify
  22  * it under the terms of the GNU General Public License version 2 as
  23  * published by the Free Software Foundation.
  24  *
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/fb.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/mm.h>
  32 #include <linux/platform_device.h>
  33 #include <linux/string.h>
  34 #include <linux/vmalloc.h>
  35 #include <asm/io.h>
  36 #include <asm/uaccess.h>
  37 #include <video/w100fb.h>
  38 #include "w100fb.h"
  39
  40 /*
  41  * Prototypes
  42  */
  43 static void w100_suspend(u32 mode);
  44 static void w100_vsync(void);
  45 static void w100_hw_init(struct w100fb_par*);
  46 static void w100_pwm_setup(struct w100fb_par*);
  47 static void w100_init_clocks(struct w100fb_par*);
  48 static void w100_setup_memory(struct w100fb_par*);
  49 static void w100_init_lcd(struct w100fb_par*);
  50 static void w100_set_dispregs(struct w100fb_par*);
  51 static void w100_update_enable(void);
  52 static void w100_update_disable(void);
  53 static void calc_hsync(struct w100fb_par *par);
  54 static void w100_init_graphic_engine(struct w100fb_par *par);
  55 struct w100_pll_info *w100_get_xtal_table(unsigned int freq);
  56
  57 /* Pseudo palette size */
  58 #define MAX_PALETTES      16
  59
  60 #define W100_SUSPEND_EXTMEM 0
  61 #define W100_SUSPEND_ALL    1
  62
  63 #define BITS_PER_PIXEL    16
  64
  65 /* Remapped addresses for base cfg, memmapped regs and the frame buffer itself */
  66 static void *remapped_base;
  67 static void *remapped_regs;
  68 static void *remapped_fbuf;
  69
  70 #define REMAPPED_FB_LEN   0x15ffff
  71
  72 /* This is the offset in the w100's address space we map the current
  73    framebuffer memory to. We use the position of external memory as
  74    we can remap internal memory to there if external isn't present. */
  75 #define W100_FB_BASE MEM_EXT_BASE_VALUE
  76
  77
  78 /*
  79  * Sysfs functions
  80  */
  81 static ssize_t flip_show(struct device *dev, struct device_attribute *attr, char *buf)
  82 {
  83         struct fb_info *info = dev_get_drvdata(dev);
  84         struct w100fb_par *par=info->par;
  85
  86         return sprintf(buf, "%d\n",par->flip);
  87 }
  88
  89 static ssize_t flip_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
  90 {
  91         unsigned int flip;
  92         struct fb_info *info = dev_get_drvdata(dev);
  93         struct w100fb_par *par=info->par;
  94
  95         flip = simple_strtoul(buf, NULL, 10);
  96
  97         if (flip > 0)
  98                 par->flip = 1;
  99         else
 100                 par->flip = 0;
 101
 102         w100_update_disable();
 103         w100_set_dispregs(par);
 104         w100_update_enable();
 105
 106         calc_hsync(par);
 107
 108         return count;
 109 }
 110
 111 static DEVICE_ATTR(flip, 0644, flip_show, flip_store);
 112
 113 static ssize_t w100fb_reg_read(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 114 {
 115         unsigned long regs, param;
 116         regs = simple_strtoul(buf, NULL, 16);
 117         param = readl(remapped_regs + regs);
 118         printk("Read Register 0x%08lX: 0x%08lX\n", regs, param);
 119         return count;
 120 }
 121
 122 static DEVICE_ATTR(reg_read, 0200, NULL, w100fb_reg_read);
 123
 124 static ssize_t w100fb_reg_write(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 125 {
 126         unsigned long regs, param;
 127         sscanf(buf, "%lx %lx", &regs, &param);
 128
 129         if (regs <= 0x2000) {
 130                 printk("Write Register 0x%08lX: 0x%08lX\n", regs, param);
 131                 writel(param, remapped_regs + regs);
 132         }
 133
 134         return count;
 135 }
 136
 137 static DEVICE_ATTR(reg_write, 0200, NULL, w100fb_reg_write);
 138
 139
 140 static ssize_t fastpllclk_show(struct device *dev, struct device_attribute *attr, char *buf)
 141 {
 142         struct fb_info *info = dev_get_drvdata(dev);
 143         struct w100fb_par *par=info->par;
 144
 145         return sprintf(buf, "%d\n",par->fastpll_mode);
 146 }
 147
 148 static ssize_t fastpllclk_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
 149 {
 150         struct fb_info *info = dev_get_drvdata(dev);
 151         struct w100fb_par *par=info->par;
 152
 153         if (simple_strtoul(buf, NULL, 10) > 0) {
 154                 par->fastpll_mode=1;
 155                 printk("w100fb: Using fast system clock (if possible)\n");
 156         } else {
 157                 par->fastpll_mode=0;
 158                 printk("w100fb: Using normal system clock\n");
 159         }
 160
 161         w100_init_clocks(par);
 162         calc_hsync(par);
 163
 164         return count;
 165 }
 166
 167 static DEVICE_ATTR(fastpllclk, 0644, fastpllclk_show, fastpllclk_store);
 168
 169 /*
 170  * Some touchscreens need hsync information from the video driver to
 171  * function correctly. We export it here.
 172  */
 173 unsigned long w100fb_get_hsynclen(struct device *dev)
 174 {
 175         struct fb_info *info = dev_get_drvdata(dev);
 176         struct w100fb_par *par=info->par;
 177
 178         /* If display is blanked/suspended, hsync isn't active */
 179         if (par->blanked)
 180                 return 0;
 181         else
 182                 return par->hsync_len;
 183 }
 184 EXPORT_SYMBOL(w100fb_get_hsynclen);
 185
 186 static void w100fb_clear_screen(struct w100fb_par *par)
 187 {
 188         memset_io(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), 0, (par->xres * par->yres * BITS_PER_PIXEL/8));
 189 }
 190
 191
 192 /*
 193  * Set a palette value from rgb components
 194  */
 195 static int w100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 196                              u_int trans, struct fb_info *info)
 197 {
 198         unsigned int val;
 199         int ret = 1;
 200
 201         /*
 202          * If greyscale is true, then we convert the RGB value
 203          * to greyscale no matter what visual we are using.
 204          */
 205         if (info->var.grayscale)
 206                 red = green = blue = (19595 * red + 38470 * green + 7471 * blue) >> 16;
 207
 208         /*
 209          * 16-bit True Colour.  We encode the RGB value
 210          * according to the RGB bitfield information.
 211          */
 212         if (regno < MAX_PALETTES) {
 213                 u32 *pal = info->pseudo_palette;
 214
 215                 val = (red & 0xf800) | ((green & 0xfc00) >> 5) | ((blue & 0xf800) >> 11);
 216                 pal[regno] = val;
 217                 ret = 0;
 218         }
 219         return ret;
 220 }
 221
 222
 223 /*
 224  * Blank the display based on value in blank_mode
 225  */
 226 static int w100fb_blank(int blank_mode, struct fb_info *info)
 227 {
 228         struct w100fb_par *par = info->par;
 229         struct w100_tg_info *tg = par->mach->tg;
 230
 231         switch(blank_mode) {
 232
 233         case FB_BLANK_NORMAL:         /* Normal blanking */
 234         case FB_BLANK_VSYNC_SUSPEND:  /* VESA blank (vsync off) */
 235         case FB_BLANK_HSYNC_SUSPEND:  /* VESA blank (hsync off) */
 236         case FB_BLANK_POWERDOWN:      /* Poweroff */
 237                 if (par->blanked == 0) {
 238                         if(tg && tg->suspend)
 239                                 tg->suspend(par);
 240                         par->blanked = 1;
 241                 }
 242                 break;
 243
 244         case FB_BLANK_UNBLANK: /* Unblanking */
 245                 if (par->blanked != 0) {
 246                         if(tg && tg->resume)
 247                                 tg->resume(par);
 248                         par->blanked = 0;
 249                 }
 250                 break;
 251         }
 252         return 0;
 253 }
 254
 255
 256 static void w100_fifo_wait(int entries)
 257 {
 258         union rbbm_status_u status;
 259         int i;
 260
 261         for (i = 0; i < 2000000; i++) {
 262                 status.val = readl(remapped_regs + mmRBBM_STATUS);
 263                 if (status.f.cmdfifo_avail >= entries)
 264                         return;
 265                 udelay(1);
 266         }
 267         printk(KERN_ERR "w100fb: FIFO Timeout!\n");
 268 }
 269
 270
 271 static int w100fb_sync(struct fb_info *info)
 272 {
 273         union rbbm_status_u status;
 274         int i;
 275
 276         for (i = 0; i < 2000000; i++) {
 277                 status.val = readl(remapped_regs + mmRBBM_STATUS);
 278                 if (!status.f.gui_active)
 279                         return 0;
 280                 udelay(1);
 281         }
 282         printk(KERN_ERR "w100fb: Graphic engine timeout!\n");
 283         return -EBUSY;
 284 }
 285
 286
 287 static void w100_init_graphic_engine(struct w100fb_par *par)
 288 {
 289         union dp_gui_master_cntl_u gmc;
 290         union dp_mix_u dp_mix;
 291         union dp_datatype_u dp_datatype;
 292         union dp_cntl_u dp_cntl;
 293
 294         w100_fifo_wait(4);
 295         writel(W100_FB_BASE, remapped_regs + mmDST_OFFSET);
 296         writel(par->xres, remapped_regs + mmDST_PITCH);
 297         writel(W100_FB_BASE, remapped_regs + mmSRC_OFFSET);
 298         writel(par->xres, remapped_regs + mmSRC_PITCH);
 299
 300         w100_fifo_wait(3);
 301         writel(0, remapped_regs + mmSC_TOP_LEFT);
 302         writel((par->yres << 16) | par->xres, remapped_regs + mmSC_BOTTOM_RIGHT);
 303         writel(0x1fff1fff, remapped_regs + mmSRC_SC_BOTTOM_RIGHT);
 304
 305         w100_fifo_wait(4);
 306         dp_cntl.val = 0;
 307         dp_cntl.f.dst_x_dir = 1;
 308         dp_cntl.f.dst_y_dir = 1;
 309         dp_cntl.f.src_x_dir = 1;
 310         dp_cntl.f.src_y_dir = 1;
 311         dp_cntl.f.dst_major_x = 1;
 312         dp_cntl.f.src_major_x = 1;
 313         writel(dp_cntl.val, remapped_regs + mmDP_CNTL);
 314
 315         gmc.val = 0;
 316         gmc.f.gmc_src_pitch_offset_cntl = 1;
 317         gmc.f.gmc_dst_pitch_offset_cntl = 1;
 318         gmc.f.gmc_src_clipping = 1;
 319         gmc.f.gmc_dst_clipping = 1;
 320         gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
 321         gmc.f.gmc_dst_datatype = 3; /* from DstType_16Bpp_444 */
 322         gmc.f.gmc_src_datatype = SRC_DATATYPE_EQU_DST;
 323         gmc.f.gmc_byte_pix_order = 1;
 324         gmc.f.gmc_default_sel = 0;
 325         gmc.f.gmc_rop3 = ROP3_SRCCOPY;
 326         gmc.f.gmc_dp_src_source = DP_SRC_MEM_RECTANGULAR;
 327         gmc.f.gmc_clr_cmp_fcn_dis = 1;
 328         gmc.f.gmc_wr_msk_dis = 1;
 329         gmc.f.gmc_dp_op = DP_OP_ROP;
 330         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 331
 332         dp_datatype.val = dp_mix.val = 0;
 333         dp_datatype.f.dp_dst_datatype = gmc.f.gmc_dst_datatype;
 334         dp_datatype.f.dp_brush_datatype = gmc.f.gmc_brush_datatype;
 335         dp_datatype.f.dp_src2_type = 0;
 336         dp_datatype.f.dp_src2_datatype = gmc.f.gmc_src_datatype;
 337         dp_datatype.f.dp_src_datatype = gmc.f.gmc_src_datatype;
 338         dp_datatype.f.dp_byte_pix_order = gmc.f.gmc_byte_pix_order;
 339         writel(dp_datatype.val, remapped_regs + mmDP_DATATYPE);
 340
 341         dp_mix.f.dp_src_source = gmc.f.gmc_dp_src_source;
 342         dp_mix.f.dp_src2_source = 1;
 343         dp_mix.f.dp_rop3 = gmc.f.gmc_rop3;
 344         dp_mix.f.dp_op = gmc.f.gmc_dp_op;
 345         writel(dp_mix.val, remapped_regs + mmDP_MIX);
 346 }
 347
 348
 349 static void w100fb_fillrect(struct fb_info *info,
 350                             const struct fb_fillrect *rect)
 351 {
 352         union dp_gui_master_cntl_u gmc;
 353
 354         if (info->state != FBINFO_STATE_RUNNING)
 355                 return;
 356         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 357                 cfb_fillrect(info, rect);
 358                 return;
 359         }
 360
 361         gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
 362         gmc.f.gmc_rop3 = ROP3_PATCOPY;
 363         gmc.f.gmc_brush_datatype = GMC_BRUSH_SOLID_COLOR;
 364         w100_fifo_wait(2);
 365         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 366         writel(rect->color, remapped_regs + mmDP_BRUSH_FRGD_CLR);
 367
 368         w100_fifo_wait(2);
 369         writel((rect->dy << 16) | (rect->dx & 0xffff), remapped_regs + mmDST_Y_X);
 370         writel((rect->width << 16) | (rect->height & 0xffff),
 371                remapped_regs + mmDST_WIDTH_HEIGHT);
 372 }
 373
 374
 375 static void w100fb_copyarea(struct fb_info *info,
 376                             const struct fb_copyarea *area)
 377 {
 378         u32 dx = area->dx, dy = area->dy, sx = area->sx, sy = area->sy;
 379         u32 h = area->height, w = area->width;
 380         union dp_gui_master_cntl_u gmc;
 381
 382         if (info->state != FBINFO_STATE_RUNNING)
 383                 return;
 384         if (info->flags & FBINFO_HWACCEL_DISABLED) {
 385                 cfb_copyarea(info, area);
 386                 return;
 387         }
 388
 389         gmc.val = readl(remapped_regs + mmDP_GUI_MASTER_CNTL);
 390         gmc.f.gmc_rop3 = ROP3_SRCCOPY;
 391         gmc.f.gmc_brush_datatype = GMC_BRUSH_NONE;
 392         w100_fifo_wait(1);
 393         writel(gmc.val, remapped_regs + mmDP_GUI_MASTER_CNTL);
 394
 395         w100_fifo_wait(3);
 396         writel((sy << 16) | (sx & 0xffff), remapped_regs + mmSRC_Y_X);
 397         writel((dy << 16) | (dx & 0xffff), remapped_regs + mmDST_Y_X);
 398         writel((w << 16) | (h & 0xffff), remapped_regs + mmDST_WIDTH_HEIGHT);
 399 }
 400
 401
 402 /*
 403  *  Change the resolution by calling the appropriate hardware functions
 404  */
 405 static void w100fb_activate_var(struct w100fb_par *par)
 406 {
 407         struct w100_tg_info *tg = par->mach->tg;
 408
 409         w100_pwm_setup(par);
 410         w100_setup_memory(par);
 411         w100_init_clocks(par);
 412         w100fb_clear_screen(par);
 413         w100_vsync();
 414
 415         w100_update_disable();
 416         w100_init_lcd(par);
 417         w100_set_dispregs(par);
 418         w100_update_enable();
 419         w100_init_graphic_engine(par);
 420
 421         calc_hsync(par);
 422
 423         if (!par->blanked && tg && tg->change)
 424                 tg->change(par);
 425 }
 426
 427
 428 /* Select the smallest mode that allows the desired resolution to be
 429  * displayed. If desired, the x and y parameters can be rounded up to
 430  * match the selected mode.
 431  */
 432 static struct w100_mode *w100fb_get_mode(struct w100fb_par *par, unsigned int *x, unsigned int *y, int saveval)
 433 {
 434         struct w100_mode *mode = NULL;
 435         struct w100_mode *modelist = par->mach->modelist;
 436         unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
 437         unsigned int i;
 438
 439         for (i = 0 ; i < par->mach->num_modes ; i++) {
 440                 if (modelist[i].xres >= *x && modelist[i].yres >= *y &&
 441                                 modelist[i].xres < best_x && modelist[i].yres < best_y) {
 442                         best_x = modelist[i].xres;
 443                         best_y = modelist[i].yres;
 444                         mode = &modelist[i];
 445                 } else if(modelist[i].xres >= *y && modelist[i].yres >= *x &&
 446                         modelist[i].xres < best_y && modelist[i].yres < best_x) {
 447                         best_x = modelist[i].yres;
 448                         best_y = modelist[i].xres;
 449                         mode = &modelist[i];
 450                 }
 451         }
 452
 453         if (mode && saveval) {
 454                 *x = best_x;
 455                 *y = best_y;
 456         }
 457
 458         return mode;
 459 }
 460
 461
 462 /*
 463  *  w100fb_check_var():
 464  *  Get the video params out of 'var'. If a value doesn't fit, round it up,
 465  *  if it's too big, return -EINVAL.
 466  */
 467 static int w100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 468 {
 469         struct w100fb_par *par=info->par;
 470
 471         if(!w100fb_get_mode(par, &var->xres, &var->yres, 1))
 472                 return -EINVAL;
 473
 474         if (par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (par->mach->mem->size+1)))
 475                 return -EINVAL;
 476
 477         if (!par->mach->mem && ((var->xres*var->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)))
 478                 return -EINVAL;
 479
 480         var->xres_virtual = max(var->xres_virtual, var->xres);
 481         var->yres_virtual = max(var->yres_virtual, var->yres);
 482
 483         if (var->bits_per_pixel > BITS_PER_PIXEL)
 484                 return -EINVAL;
 485         else
 486                 var->bits_per_pixel = BITS_PER_PIXEL;
 487
 488         var->red.offset = 11;
 489         var->red.length = 5;
 490         var->green.offset = 5;
 491         var->green.length = 6;
 492         var->blue.offset = 0;
 493         var->blue.length = 5;
 494         var->transp.offset = var->transp.length = 0;
 495
 496         var->nonstd = 0;
 497         var->height = -1;
 498         var->width = -1;
 499         var->vmode = FB_VMODE_NONINTERLACED;
 500         var->sync = 0;
 501         var->pixclock = 0x04;  /* 171521; */
 502
 503         return 0;
 504 }
 505
 506
 507 /*
 508  * w100fb_set_par():
 509  *      Set the user defined part of the display for the specified console
 510  *  by looking at the values in info.var
 511  */
 512 static int w100fb_set_par(struct fb_info *info)
 513 {
 514         struct w100fb_par *par=info->par;
 515
 516         if (par->xres != info->var.xres || par->yres != info->var.yres) {
 517                 par->xres = info->var.xres;
 518                 par->yres = info->var.yres;
 519                 par->mode = w100fb_get_mode(par, &par->xres, &par->yres, 0);
 520
 521                 info->fix.visual = FB_VISUAL_TRUECOLOR;
 522                 info->fix.ypanstep = 0;
 523                 info->fix.ywrapstep = 0;
 524                 info->fix.line_length = par->xres * BITS_PER_PIXEL / 8;
 525
 526                 if ((par->xres*par->yres*BITS_PER_PIXEL/8) > (MEM_INT_SIZE+1)) {
 527                         par->extmem_active = 1;
 528                         info->fix.smem_len = par->mach->mem->size+1;
 529                 } else {
 530                         par->extmem_active = 0;
 531                         info->fix.smem_len = MEM_INT_SIZE+1;
 532                 }
 533
 534                 w100fb_activate_var(par);
 535         }
 536         return 0;
 537 }
 538
 539
 540 /*
 541  *  Frame buffer operations
 542  */
 543 static struct fb_ops w100fb_ops = {
 544         .owner        = THIS_MODULE,
 545         .fb_check_var = w100fb_check_var,
 546         .fb_set_par   = w100fb_set_par,
 547         .fb_setcolreg = w100fb_setcolreg,
 548         .fb_blank     = w100fb_blank,
 549         .fb_fillrect  = w100fb_fillrect,
 550         .fb_copyarea  = w100fb_copyarea,
 551         .fb_imageblit = cfb_imageblit,
 552         .fb_sync      = w100fb_sync,
 553 };
 554
 555 #ifdef CONFIG_PM
 556 static void w100fb_save_vidmem(struct w100fb_par *par)
 557 {
 558         int memsize;
 559
 560         if (par->extmem_active) {
 561                 memsize=par->mach->mem->size;
 562                 par->saved_extmem = vmalloc(memsize);
 563                 if (par->saved_extmem)
 564                         memcpy_fromio(par->saved_extmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 565         }
 566         memsize=MEM_INT_SIZE;
 567         par->saved_intmem = vmalloc(memsize);
 568         if (par->saved_intmem && par->extmem_active)
 569                 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), memsize);
 570         else if (par->saved_intmem)
 571                 memcpy_fromio(par->saved_intmem, remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), memsize);
 572 }
 573
 574 static void w100fb_restore_vidmem(struct w100fb_par *par)
 575 {
 576         int memsize;
 577
 578         if (par->extmem_active && par->saved_extmem) {
 579                 memsize=par->mach->mem->size;
 580                 memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_extmem, memsize);
 581                 vfree(par->saved_extmem);
 582         }
 583         if (par->saved_intmem) {
 584                 memsize=MEM_INT_SIZE;
 585                 if (par->extmem_active)
 586                         memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_INT_BASE_VALUE), par->saved_intmem, memsize);
 587                 else
 588                         memcpy_toio(remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE), par->saved_intmem, memsize);
 589                 vfree(par->saved_intmem);
 590         }
 591 }
 592
 593 static int w100fb_suspend(struct platform_device *dev, pm_message_t state)
 594 {
 595         struct fb_info *info = platform_get_drvdata(dev);
 596         struct w100fb_par *par=info->par;
 597         struct w100_tg_info *tg = par->mach->tg;
 598
 599         w100fb_save_vidmem(par);
 600         if(tg && tg->suspend)
 601                 tg->suspend(par);
 602         w100_suspend(W100_SUSPEND_ALL);
 603         par->blanked = 1;
 604
 605         return 0;
 606 }
 607
 608 static int w100fb_resume(struct platform_device *dev)
 609 {
 610         struct fb_info *info = platform_get_drvdata(dev);
 611         struct w100fb_par *par=info->par;
 612         struct w100_tg_info *tg = par->mach->tg;
 613
 614         w100_hw_init(par);
 615         w100fb_activate_var(par);
 616         w100fb_restore_vidmem(par);
 617         if(tg && tg->resume)
 618                 tg->resume(par);
 619         par->blanked = 0;
 620
 621         return 0;
 622 }
 623 #else
 624 #define w100fb_suspend  NULL
 625 #define w100fb_resume   NULL
 626 #endif
 627
 628
 629 int __init w100fb_probe(struct platform_device *pdev)
 630 {
 631         int err = -EIO;
 632         struct w100fb_mach_info *inf;
 633         struct fb_info *info = NULL;
 634         struct w100fb_par *par;
 635         struct resource *mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 636         unsigned int chip_id;
 637
 638         if (!mem)
 639                 return -EINVAL;
 640
 641         /* Remap the chip base address */
 642         remapped_base = ioremap_nocache(mem->start+W100_CFG_BASE, W100_CFG_LEN);
 643         if (remapped_base == NULL)
 644                 goto out;
 645
 646         /* Map the register space */
 647         remapped_regs = ioremap_nocache(mem->start+W100_REG_BASE, W100_REG_LEN);
 648         if (remapped_regs == NULL)
 649                 goto out;
 650
 651         /* Identify the chip */
 652         printk("Found ");
 653         chip_id = readl(remapped_regs + mmCHIP_ID);
 654         switch(chip_id) {
 655                 case CHIP_ID_W100:  printk("w100");  break;
 656                 case CHIP_ID_W3200: printk("w3200"); break;
 657                 case CHIP_ID_W3220: printk("w3220"); break;
 658                 default:
 659                         printk("Unknown imageon chip ID\n");
 660                         err = -ENODEV;
 661                         goto out;
 662         }
 663         printk(" at 0x%08lx.\n", (unsigned long) mem->start+W100_CFG_BASE);
 664
 665         /* Remap the framebuffer */
 666         remapped_fbuf = ioremap_nocache(mem->start+MEM_WINDOW_BASE, MEM_WINDOW_SIZE);
 667         if (remapped_fbuf == NULL)
 668                 goto out;
 669
 670         info=framebuffer_alloc(sizeof(struct w100fb_par), &pdev->dev);
 671         if (!info) {
 672                 err = -ENOMEM;
 673                 goto out;
 674         }
 675
 676         par = info->par;
 677         platform_set_drvdata(pdev, info);
 678
 679         inf = pdev->dev.platform_data;
 680         par->chip_id = chip_id;
 681         par->mach = inf;
 682         par->fastpll_mode = 0;
 683         par->blanked = 0;
 684
 685         par->pll_table=w100_get_xtal_table(inf->xtal_freq);
 686         if (!par->pll_table) {
 687                 printk(KERN_ERR "No matching Xtal definition found\n");
 688                 err = -EINVAL;
 689                 goto out;
 690         }
 691
 692         info->pseudo_palette = kmalloc(sizeof (u32) * MAX_PALETTES, GFP_KERNEL);
 693         if (!info->pseudo_palette) {
 694                 err = -ENOMEM;
 695                 goto out;
 696         }
 697
 698         info->fbops = &w100fb_ops;
 699         info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
 700                 FBINFO_HWACCEL_FILLRECT;
 701         info->node = -1;
 702         info->screen_base = remapped_fbuf + (W100_FB_BASE-MEM_WINDOW_BASE);
 703         info->screen_size = REMAPPED_FB_LEN;
 704
 705         strcpy(info->fix.id, "w100fb");
 706         info->fix.type = FB_TYPE_PACKED_PIXELS;
 707         info->fix.type_aux = 0;
 708         info->fix.accel = FB_ACCEL_NONE;
 709         info->fix.smem_start = mem->start+W100_FB_BASE;
 710         info->fix.mmio_start = mem->start+W100_REG_BASE;
 711         info->fix.mmio_len = W100_REG_LEN;
 712
 713         if (fb_alloc_cmap(&info->cmap, 256, 0) < 0) {
 714                 err = -ENOMEM;
 715                 goto out;
 716         }
 717
 718         par->mode = &inf->modelist[0];
 719         if(inf->init_mode & INIT_MODE_ROTATED) {
 720                 info->var.xres = par->mode->yres;
 721                 info->var.yres = par->mode->xres;
 722         }
 723         else {
 724                 info->var.xres = par->mode->xres;
 725                 info->var.yres = par->mode->yres;
 726         }
 727
 728         if(inf->init_mode &= INIT_MODE_FLIPPED)
 729                 par->flip = 1;
 730         else
 731                 par->flip = 0;
 732
 733         info->var.xres_virtual = info->var.xres;
 734         info->var.yres_virtual = info->var.yres;
 735         info->var.pixclock = 0x04;  /* 171521; */
 736         info->var.sync = 0;
 737         info->var.grayscale = 0;
 738         info->var.xoffset = info->var.yoffset = 0;
 739         info->var.accel_flags = 0;
 740         info->var.activate = FB_ACTIVATE_NOW;
 741
 742         w100_hw_init(par);
 743
 744         if (w100fb_check_var(&info->var, info) < 0) {
 745                 err = -EINVAL;
 746                 goto out;
 747         }
 748
 749         w100fb_set_par(info);
 750
 751         if (register_framebuffer(info) < 0) {
 752                 err = -EINVAL;
 753                 goto out;
 754         }
 755
 756         err = device_create_file(&pdev->dev, &dev_attr_fastpllclk);
 757         err |= device_create_file(&pdev->dev, &dev_attr_reg_read);
 758         err |= device_create_file(&pdev->dev, &dev_attr_reg_write);
 759         err |= device_create_file(&pdev->dev, &dev_attr_flip);
 760
 761         if (err != 0)
 762                 printk(KERN_WARNING "fb%d: failed to register attributes (%d)\n",
 763                                 info->node, err);
 764
 765         printk(KERN_INFO "fb%d: %s frame buffer device\n", info->node, info->fix.id);
 766         return 0;
 767 out:
 768         if (info) {
 769                 fb_dealloc_cmap(&info->cmap);
 770                 kfree(info->pseudo_palette);
 771         }
 772         if (remapped_fbuf != NULL)
 773                 iounmap(remapped_fbuf);
 774         if (remapped_regs != NULL)
 775                 iounmap(remapped_regs);
 776         if (remapped_base != NULL)
 777                 iounmap(remapped_base);
 778         if (info)
 779                 framebuffer_release(info);
 780         return err;
 781 }
 782
 783
 784 static int w100fb_remove(struct platform_device *pdev)
 785 {
 786         struct fb_info *info = platform_get_drvdata(pdev);
 787         struct w100fb_par *par=info->par;
 788
 789         device_remove_file(&pdev->dev, &dev_attr_fastpllclk);
 790         device_remove_file(&pdev->dev, &dev_attr_reg_read);
 791         device_remove_file(&pdev->dev, &dev_attr_reg_write);
 792         device_remove_file(&pdev->dev, &dev_attr_flip);
 793
 794         unregister_framebuffer(info);
 795
 796         vfree(par->saved_intmem);
 797         vfree(par->saved_extmem);
 798         kfree(info->pseudo_palette);
 799         fb_dealloc_cmap(&info->cmap);
 800
 801         iounmap(remapped_base);
 802         iounmap(remapped_regs);
 803         iounmap(remapped_fbuf);
 804
 805         framebuffer_release(info);
 806
 807         return 0;
 808 }
 809
 810
 811 /* ------------------- chipset specific functions -------------------------- */
 812
 813
 814 static void w100_soft_reset(void)
 815 {
 816         u16 val = readw((u16 *) remapped_base + cfgSTATUS);
 817         writew(val | 0x08, (u16 *) remapped_base + cfgSTATUS);
 818         udelay(100);
 819         writew(0x00, (u16 *) remapped_base + cfgSTATUS);
 820         udelay(100);
 821 }
 822
 823 static void w100_update_disable(void)
 824 {
 825         union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
 826
 827         /* Prevent display updates */
 828         disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
 829         disp_db_buf_wr_cntl.f.update_db_buf = 0;
 830         disp_db_buf_wr_cntl.f.en_db_buf = 0;
 831         writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
 832 }
 833
 834 static void w100_update_enable(void)
 835 {
 836         union disp_db_buf_cntl_wr_u disp_db_buf_wr_cntl;
 837
 838         /* Enable display updates */
 839         disp_db_buf_wr_cntl.f.db_buf_cntl = 0x1e;
 840         disp_db_buf_wr_cntl.f.update_db_buf = 1;
 841         disp_db_buf_wr_cntl.f.en_db_buf = 1;
 842         writel((u32) (disp_db_buf_wr_cntl.val), remapped_regs + mmDISP_DB_BUF_CNTL);
 843 }
 844
 845 unsigned long w100fb_gpio_read(int port)
 846 {
 847         unsigned long value;
 848
 849         if (port==W100_GPIO_PORT_A)
 850                 value = readl(remapped_regs + mmGPIO_DATA);
 851         else
 852                 value = readl(remapped_regs + mmGPIO_DATA2);
 853
 854         return value;
 855 }
 856
 857 void w100fb_gpio_write(int port, unsigned long value)
 858 {
 859         if (port==W100_GPIO_PORT_A)
 860                 value = writel(value, remapped_regs + mmGPIO_DATA);
 861         else
 862                 value = writel(value, remapped_regs + mmGPIO_DATA2);
 863 }
 864 EXPORT_SYMBOL(w100fb_gpio_read);
 865 EXPORT_SYMBOL(w100fb_gpio_write);
 866
 867 /*
 868  * Initialization of critical w100 hardware
 869  */
 870 static void w100_hw_init(struct w100fb_par *par)
 871 {
 872         u32 temp32;
 873         union cif_cntl_u cif_cntl;
 874         union intf_cntl_u intf_cntl;
 875         union cfgreg_base_u cfgreg_base;
 876         union wrap_top_dir_u wrap_top_dir;
 877         union cif_read_dbg_u cif_read_dbg;
 878         union cpu_defaults_u cpu_default;
 879         union cif_write_dbg_u cif_write_dbg;
 880         union wrap_start_dir_u wrap_start_dir;
 881         union cif_io_u cif_io;
 882         struct w100_gpio_regs *gpio = par->mach->gpio;
 883
 884         w100_soft_reset();
 885
 886         /* This is what the fpga_init code does on reset. May be wrong
 887            but there is little info available */
 888         writel(0x31, remapped_regs + mmSCRATCH_UMSK);
 889         for (temp32 = 0; temp32 < 10000; temp32++)
 890                 readl(remapped_regs + mmSCRATCH_UMSK);
 891         writel(0x30, remapped_regs + mmSCRATCH_UMSK);
 892
 893         /* Set up CIF */
 894         cif_io.val = defCIF_IO;
 895         writel((u32)(cif_io.val), remapped_regs + mmCIF_IO);
 896
 897         cif_write_dbg.val = readl(remapped_regs + mmCIF_WRITE_DBG);
 898         cif_write_dbg.f.dis_packer_ful_during_rbbm_timeout = 0;
 899         cif_write_dbg.f.en_dword_split_to_rbbm = 1;
 900         cif_write_dbg.f.dis_timeout_during_rbbm = 1;
 901         writel((u32) (cif_write_dbg.val), remapped_regs + mmCIF_WRITE_DBG);
 902
 903         cif_read_dbg.val = readl(remapped_regs + mmCIF_READ_DBG);
 904         cif_read_dbg.f.dis_rd_same_byte_to_trig_fetch = 1;
 905         writel((u32) (cif_read_dbg.val), remapped_regs + mmCIF_READ_DBG);
 906
 907         cif_cntl.val = readl(remapped_regs + mmCIF_CNTL);
 908         cif_cntl.f.dis_system_bits = 1;
 909         cif_cntl.f.dis_mr = 1;
 910         cif_cntl.f.en_wait_to_compensate_dq_prop_dly = 0;
 911         cif_cntl.f.intb_oe = 1;
 912         cif_cntl.f.interrupt_active_high = 1;
 913         writel((u32) (cif_cntl.val), remapped_regs + mmCIF_CNTL);
 914
 915         /* Setup cfgINTF_CNTL and cfgCPU defaults */
 916         intf_cntl.val = defINTF_CNTL;
 917         intf_cntl.f.ad_inc_a = 1;
 918         intf_cntl.f.ad_inc_b = 1;
 919         intf_cntl.f.rd_data_rdy_a = 0;
 920         intf_cntl.f.rd_data_rdy_b = 0;
 921         writeb((u8) (intf_cntl.val), remapped_base + cfgINTF_CNTL);
 922
 923         cpu_default.val = defCPU_DEFAULTS;
 924         cpu_default.f.access_ind_addr_a = 1;
 925         cpu_default.f.access_ind_addr_b = 1;
 926         cpu_default.f.access_scratch_reg = 1;
 927         cpu_default.f.transition_size = 0;
 928         writeb((u8) (cpu_default.val), remapped_base + cfgCPU_DEFAULTS);
 929
 930         /* set up the apertures */
 931         writeb((u8) (W100_REG_BASE >> 16), remapped_base + cfgREG_BASE);
 932
 933         cfgreg_base.val = defCFGREG_BASE;
 934         cfgreg_base.f.cfgreg_base = W100_CFG_BASE;
 935         writel((u32) (cfgreg_base.val), remapped_regs + mmCFGREG_BASE);
 936
 937         wrap_start_dir.val = defWRAP_START_DIR;
 938         wrap_start_dir.f.start_addr = WRAP_BUF_BASE_VALUE >> 1;
 939         writel((u32) (wrap_start_dir.val), remapped_regs + mmWRAP_START_DIR);
 940
 941         wrap_top_dir.val = defWRAP_TOP_DIR;
 942         wrap_top_dir.f.top_addr = WRAP_BUF_TOP_VALUE >> 1;
 943         writel((u32) (wrap_top_dir.val), remapped_regs + mmWRAP_TOP_DIR);
 944
 945         writel((u32) 0x2440, remapped_regs + mmRBBM_CNTL);
 946
 947         /* Set the hardware to 565 colour */
 948         temp32 = readl(remapped_regs + mmDISP_DEBUG2);
 949         temp32 &= 0xff7fffff;
 950         temp32 |= 0x00800000;
 951         writel(temp32, remapped_regs + mmDISP_DEBUG2);
 952
 953         /* Initialise the GPIO lines */
 954         if (gpio) {
 955                 writel(gpio->init_data1, remapped_regs + mmGPIO_DATA);
 956                 writel(gpio->init_data2, remapped_regs + mmGPIO_DATA2);
 957                 writel(gpio->gpio_dir1,  remapped_regs + mmGPIO_CNTL1);
 958                 writel(gpio->gpio_oe1,   remapped_regs + mmGPIO_CNTL2);
 959                 writel(gpio->gpio_dir2,  remapped_regs + mmGPIO_CNTL3);
 960                 writel(gpio->gpio_oe2,   remapped_regs + mmGPIO_CNTL4);
 961         }
 962 }
 963
 964
 965 struct power_state {
 966         union clk_pin_cntl_u clk_pin_cntl;
 967         union pll_ref_fb_div_u pll_ref_fb_div;
 968         union pll_cntl_u pll_cntl;
 969         union sclk_cntl_u sclk_cntl;
 970         union pclk_cntl_u pclk_cntl;
 971         union pwrmgt_cntl_u pwrmgt_cntl;
 972         int auto_mode;  /* system clock auto changing? */
 973 };
 974
 975
 976 static struct power_state w100_pwr_state;
 977
 978 /* The PLL Fout is determined by (XtalFreq/(M+1)) * ((N_int+1) + (N_fac/8)) */
 979
 980 /* 12.5MHz Crystal PLL Table */
 981 static struct w100_pll_info xtal_12500000[] = {
 982         /*freq     M   N_int    N_fac  tfgoal  lock_time */
 983         { 50,      0,   1,       0,     0xe0,        56},  /*  50.00 MHz */
 984         { 75,      0,   5,       0,     0xde,        37},  /*  75.00 MHz */
 985         {100,      0,   7,       0,     0xe0,        28},  /* 100.00 MHz */
 986         {125,      0,   9,       0,     0xe0,        22},  /* 125.00 MHz */
 987         {150,      0,   11,      0,     0xe0,        17},  /* 150.00 MHz */
 988         {  0,      0,   0,       0,        0,         0},  /* Terminator */
 989 };
 990
 991 /* 14.318MHz Crystal PLL Table */
 992 static struct w100_pll_info xtal_14318000[] = {
 993         /*freq     M   N_int    N_fac  tfgoal  lock_time */
 994         { 40,      4,   13,      0,     0xe0,        80}, /* tfgoal guessed */
 995         { 50,      1,   6,       0,     0xe0,        64}, /*  50.05 MHz */
 996         { 57,      2,   11,      0,     0xe0,        53}, /* tfgoal guessed */
 997         { 75,      0,   4,       3,     0xe0,        43}, /*  75.08 MHz */
 998         {100,      0,   6,       0,     0xe0,        32}, /* 100.10 MHz */
 999         {  0,      0,   0,       0,        0,         0},
1000 };
1001
1002 /* 16MHz Crystal PLL Table */
1003 static struct w100_pll_info xtal_16000000[] = {
1004         /*freq     M   N_int    N_fac  tfgoal  lock_time */
1005         { 72,      1,   8,       0,     0xe0,        48}, /* tfgoal guessed */
1006         { 95,      1,   10,      7,     0xe0,        38}, /* tfgoal guessed */
1007         { 96,      1,   11,      0,     0xe0,        36}, /* tfgoal guessed */
1008         {  0,      0,   0,       0,        0,         0},
1009 };
1010
1011 static struct pll_entries {
1012         int xtal_freq;
1013         struct w100_pll_info *pll_table;
1014 } w100_pll_tables[] = {
1015         { 12500000, &xtal_12500000[0] },
1016         { 14318000, &xtal_14318000[0] },
1017         { 16000000, &xtal_16000000[0] },
1018         { 0 },
1019 };
1020
1021 struct w100_pll_info *w100_get_xtal_table(unsigned int freq)
1022 {
1023         struct pll_entries *pll_entry = w100_pll_tables;
1024
1025         do {
1026                 if (freq == pll_entry->xtal_freq)
1027                         return pll_entry->pll_table;
1028                 pll_entry++;
1029         } while (pll_entry->xtal_freq);
1030         return 0;
1031 }
1032
1033
1034 static unsigned int w100_get_testcount(unsigned int testclk_sel)
1035 {
1036         union clk_test_cntl_u clk_test_cntl;
1037
1038         udelay(5);
1039
1040         /* Select the test clock source and reset */
1041         clk_test_cntl.f.start_check_freq = 0x0;
1042         clk_test_cntl.f.testclk_sel = testclk_sel;
1043         clk_test_cntl.f.tstcount_rst = 0x1; /* set reset */
1044         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1045
1046         clk_test_cntl.f.tstcount_rst = 0x0; /* clear reset */
1047         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1048
1049         /* Run clock test */
1050         clk_test_cntl.f.start_check_freq = 0x1;
1051         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1052
1053         /* Give the test time to complete */
1054         udelay(20);
1055
1056         /* Return the result */
1057         clk_test_cntl.val = readl(remapped_regs + mmCLK_TEST_CNTL);
1058         clk_test_cntl.f.start_check_freq = 0x0;
1059         writel((u32) (clk_test_cntl.val), remapped_regs + mmCLK_TEST_CNTL);
1060
1061         return clk_test_cntl.f.test_count;
1062 }
1063
1064
1065 static int w100_pll_adjust(struct w100_pll_info *pll)
1066 {
1067         unsigned int tf80;
1068         unsigned int tf20;
1069
1070         /* Initial Settings */
1071         w100_pwr_state.pll_cntl.f.pll_pwdn = 0x0;     /* power down */
1072         w100_pwr_state.pll_cntl.f.pll_reset = 0x0;    /* not reset */
1073         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x1;   /* Hi-Z */
1074         w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;      /* VCO gain = 0 */
1075         w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;    /* VCO frequency range control = off */
1076         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;  /* current offset inside VCO = 0 */
1077         w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
1078
1079         /* Wai Ming 80 percent of VDD 1.3V gives 1.04V, minimum operating voltage is 1.08V
1080          * therefore, commented out the following lines
1081          * tf80 meant tf100
1082          */
1083         do {
1084                 /* set VCO input = 0.8 * VDD */
1085                 w100_pwr_state.pll_cntl.f.pll_dactal = 0xd;
1086                 writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1087
1088                 tf80 = w100_get_testcount(TESTCLK_SRC_PLL);
1089                 if (tf80 >= (pll->tfgoal)) {
1090                         /* set VCO input = 0.2 * VDD */
1091                         w100_pwr_state.pll_cntl.f.pll_dactal = 0x7;
1092                         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1093
1094                         tf20 = w100_get_testcount(TESTCLK_SRC_PLL);
1095                         if (tf20 <= (pll->tfgoal))
1096                                 return 1;  /* Success */
1097
1098                         if ((w100_pwr_state.pll_cntl.f.pll_vcofr == 0x0) &&
1099                                 ((w100_pwr_state.pll_cntl.f.pll_pvg == 0x7) ||
1100                                 (w100_pwr_state.pll_cntl.f.pll_ioffset == 0x0))) {
1101                                 /* slow VCO config */
1102                                 w100_pwr_state.pll_cntl.f.pll_vcofr = 0x1;
1103                                 w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
1104                                 w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1105                                 continue;
1106                         }
1107                 }
1108                 if ((w100_pwr_state.pll_cntl.f.pll_ioffset) < 0x3) {
1109                         w100_pwr_state.pll_cntl.f.pll_ioffset += 0x1;
1110                 } else if ((w100_pwr_state.pll_cntl.f.pll_pvg) < 0x7) {
1111                         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1112                         w100_pwr_state.pll_cntl.f.pll_pvg += 0x1;
1113                 } else {
1114                         return 0;  /* Error */
1115                 }
1116         } while(1);
1117 }
1118
1119
1120 /*
1121  * w100_pll_calibration
1122  */
1123 static int w100_pll_calibration(struct w100_pll_info *pll)
1124 {
1125         int status;
1126
1127         status = w100_pll_adjust(pll);
1128
1129         /* PLL Reset And Lock */
1130         /* set VCO input = 0.5 * VDD */
1131         w100_pwr_state.pll_cntl.f.pll_dactal = 0xa;
1132         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1133
1134         udelay(1);  /* reset time */
1135
1136         /* enable charge pump */
1137         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;  /* normal */
1138         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1139
1140         /* set VCO input = Hi-Z, disable DAC */
1141         w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;
1142         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1143
1144         udelay(400);  /* lock time */
1145
1146         /* PLL locked */
1147
1148         return status;
1149 }
1150
1151
1152 static int w100_pll_set_clk(struct w100_pll_info *pll)
1153 {
1154         int status;
1155
1156         if (w100_pwr_state.auto_mode == 1)  /* auto mode */
1157         {
1158                 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;  /* disable fast to normal */
1159                 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;  /* disable normal to fast */
1160                 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1161         }
1162
1163         /* Set system clock source to XTAL whilst adjusting the PLL! */
1164         w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
1165         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1166
1167         w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = pll->M;
1168         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = pll->N_int;
1169         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = pll->N_fac;
1170         w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = pll->lock_time;
1171         writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
1172
1173         w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0;
1174         writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1175
1176         status = w100_pll_calibration(pll);
1177
1178         if (w100_pwr_state.auto_mode == 1)  /* auto mode */
1179         {
1180                 w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x1;  /* reenable fast to normal */
1181                 w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x1;  /* reenable normal to fast  */
1182                 writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1183         }
1184         return status;
1185 }
1186
1187 /* freq = target frequency of the PLL */
1188 static int w100_set_pll_freq(struct w100fb_par *par, unsigned int freq)
1189 {
1190         struct w100_pll_info *pll = par->pll_table;
1191
1192         do {
1193                 if (freq == pll->freq) {
1194                         return w100_pll_set_clk(pll);
1195                 }
1196                 pll++;
1197         } while(pll->freq);
1198         return 0;
1199 }
1200
1201 /* Set up an initial state.  Some values/fields set
1202    here will be overwritten. */
1203 static void w100_pwm_setup(struct w100fb_par *par)
1204 {
1205         w100_pwr_state.clk_pin_cntl.f.osc_en = 0x1;
1206         w100_pwr_state.clk_pin_cntl.f.osc_gain = 0x1f;
1207         w100_pwr_state.clk_pin_cntl.f.dont_use_xtalin = 0x0;
1208         w100_pwr_state.clk_pin_cntl.f.xtalin_pm_en = 0x0;
1209         w100_pwr_state.clk_pin_cntl.f.xtalin_dbl_en = par->mach->xtal_dbl ? 1 : 0;
1210         w100_pwr_state.clk_pin_cntl.f.cg_debug = 0x0;
1211         writel((u32) (w100_pwr_state.clk_pin_cntl.val), remapped_regs + mmCLK_PIN_CNTL);
1212
1213         w100_pwr_state.sclk_cntl.f.sclk_src_sel = CLK_SRC_XTAL;
1214         w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = 0x0;  /* Pfast = 1 */
1215         w100_pwr_state.sclk_cntl.f.sclk_clkon_hys = 0x3;
1216         w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = 0x0;  /* Pslow = 1 */
1217         w100_pwr_state.sclk_cntl.f.disp_cg_ok2switch_en = 0x0;
1218         w100_pwr_state.sclk_cntl.f.sclk_force_reg = 0x0;    /* Dynamic */
1219         w100_pwr_state.sclk_cntl.f.sclk_force_disp = 0x0;   /* Dynamic */
1220         w100_pwr_state.sclk_cntl.f.sclk_force_mc = 0x0;     /* Dynamic */
1221         w100_pwr_state.sclk_cntl.f.sclk_force_extmc = 0x0;  /* Dynamic */
1222         w100_pwr_state.sclk_cntl.f.sclk_force_cp = 0x0;     /* Dynamic */
1223         w100_pwr_state.sclk_cntl.f.sclk_force_e2 = 0x0;     /* Dynamic */
1224         w100_pwr_state.sclk_cntl.f.sclk_force_e3 = 0x0;     /* Dynamic */
1225         w100_pwr_state.sclk_cntl.f.sclk_force_idct = 0x0;   /* Dynamic */
1226         w100_pwr_state.sclk_cntl.f.sclk_force_bist = 0x0;   /* Dynamic */
1227         w100_pwr_state.sclk_cntl.f.busy_extend_cp = 0x0;
1228         w100_pwr_state.sclk_cntl.f.busy_extend_e2 = 0x0;
1229         w100_pwr_state.sclk_cntl.f.busy_extend_e3 = 0x0;
1230         w100_pwr_state.sclk_cntl.f.busy_extend_idct = 0x0;
1231         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1232
1233         w100_pwr_state.pclk_cntl.f.pclk_src_sel = CLK_SRC_XTAL;
1234         w100_pwr_state.pclk_cntl.f.pclk_post_div = 0x1;    /* P = 2 */
1235         w100_pwr_state.pclk_cntl.f.pclk_force_disp = 0x0;  /* Dynamic */
1236         writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
1237
1238         w100_pwr_state.pll_ref_fb_div.f.pll_ref_div = 0x0;     /* M = 1 */
1239         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_int = 0x0;  /* N = 1.0 */
1240         w100_pwr_state.pll_ref_fb_div.f.pll_fb_div_frac = 0x0;
1241         w100_pwr_state.pll_ref_fb_div.f.pll_reset_time = 0x5;
1242         w100_pwr_state.pll_ref_fb_div.f.pll_lock_time = 0xff;
1243         writel((u32) (w100_pwr_state.pll_ref_fb_div.val), remapped_regs + mmPLL_REF_FB_DIV);
1244
1245         w100_pwr_state.pll_cntl.f.pll_pwdn = 0x1;
1246         w100_pwr_state.pll_cntl.f.pll_reset = 0x1;
1247         w100_pwr_state.pll_cntl.f.pll_pm_en = 0x0;
1248         w100_pwr_state.pll_cntl.f.pll_mode = 0x0;  /* uses VCO clock */
1249         w100_pwr_state.pll_cntl.f.pll_refclk_sel = 0x0;
1250         w100_pwr_state.pll_cntl.f.pll_fbclk_sel = 0x0;
1251         w100_pwr_state.pll_cntl.f.pll_tcpoff = 0x0;
1252         w100_pwr_state.pll_cntl.f.pll_pcp = 0x4;
1253         w100_pwr_state.pll_cntl.f.pll_pvg = 0x0;
1254         w100_pwr_state.pll_cntl.f.pll_vcofr = 0x0;
1255         w100_pwr_state.pll_cntl.f.pll_ioffset = 0x0;
1256         w100_pwr_state.pll_cntl.f.pll_pecc_mode = 0x0;
1257         w100_pwr_state.pll_cntl.f.pll_pecc_scon = 0x0;
1258         w100_pwr_state.pll_cntl.f.pll_dactal = 0x0;  /* Hi-Z */
1259         w100_pwr_state.pll_cntl.f.pll_cp_clip = 0x3;
1260         w100_pwr_state.pll_cntl.f.pll_conf = 0x2;
1261         w100_pwr_state.pll_cntl.f.pll_mbctrl = 0x2;
1262         w100_pwr_state.pll_cntl.f.pll_ring_off = 0x0;
1263         writel((u32) (w100_pwr_state.pll_cntl.val), remapped_regs + mmPLL_CNTL);
1264
1265         w100_pwr_state.pwrmgt_cntl.f.pwm_enable = 0x0;
1266         w100_pwr_state.pwrmgt_cntl.f.pwm_mode_req = 0x1;  /* normal mode (0, 1, 3) */
1267         w100_pwr_state.pwrmgt_cntl.f.pwm_wakeup_cond = 0x0;
1268         w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_hw_en = 0x0;
1269         w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_hw_en = 0x0;
1270         w100_pwr_state.pwrmgt_cntl.f.pwm_fast_noml_cond = 0x1;  /* PM4,ENG */
1271         w100_pwr_state.pwrmgt_cntl.f.pwm_noml_fast_cond = 0x1;  /* PM4,ENG */
1272         w100_pwr_state.pwrmgt_cntl.f.pwm_idle_timer = 0xFF;
1273         w100_pwr_state.pwrmgt_cntl.f.pwm_busy_timer = 0xFF;
1274         writel((u32) (w100_pwr_state.pwrmgt_cntl.val), remapped_regs + mmPWRMGT_CNTL);
1275
1276         w100_pwr_state.auto_mode = 0;  /* manual mode */
1277 }
1278
1279
1280 /*
1281  * Setup the w100 clocks for the specified mode
1282  */
1283 static void w100_init_clocks(struct w100fb_par *par)
1284 {
1285         struct w100_mode *mode = par->mode;
1286
1287         if (mode->pixclk_src == CLK_SRC_PLL || mode->sysclk_src == CLK_SRC_PLL)
1288                 w100_set_pll_freq(par, (par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq);
1289
1290         w100_pwr_state.sclk_cntl.f.sclk_src_sel = mode->sysclk_src;
1291         w100_pwr_state.sclk_cntl.f.sclk_post_div_fast = mode->sysclk_divider;
1292         w100_pwr_state.sclk_cntl.f.sclk_post_div_slow = mode->sysclk_divider;
1293         writel((u32) (w100_pwr_state.sclk_cntl.val), remapped_regs + mmSCLK_CNTL);
1294 }
1295
1296 static void w100_init_lcd(struct w100fb_par *par)
1297 {
1298         u32 temp32;
1299         struct w100_mode *mode = par->mode;
1300         struct w100_gen_regs *regs = par->mach->regs;
1301         union active_h_disp_u active_h_disp;
1302         union active_v_disp_u active_v_disp;
1303         union graphic_h_disp_u graphic_h_disp;
1304         union graphic_v_disp_u graphic_v_disp;
1305         union crtc_total_u crtc_total;
1306
1307         /* w3200 doesnt like undefined bits being set so zero register values first */
1308
1309         active_h_disp.val = 0;
1310         active_h_disp.f.active_h_start=mode->left_margin;
1311         active_h_disp.f.active_h_end=mode->left_margin + mode->xres;
1312         writel(active_h_disp.val, remapped_regs + mmACTIVE_H_DISP);
1313
1314         active_v_disp.val = 0;
1315         active_v_disp.f.active_v_start=mode->upper_margin;
1316         active_v_disp.f.active_v_end=mode->upper_margin + mode->yres;
1317         writel(active_v_disp.val, remapped_regs + mmACTIVE_V_DISP);
1318
1319         graphic_h_disp.val = 0;
1320         graphic_h_disp.f.graphic_h_start=mode->left_margin;
1321         graphic_h_disp.f.graphic_h_end=mode->left_margin + mode->xres;
1322         writel(graphic_h_disp.val, remapped_regs + mmGRAPHIC_H_DISP);
1323
1324         graphic_v_disp.val = 0;
1325         graphic_v_disp.f.graphic_v_start=mode->upper_margin;
1326         graphic_v_disp.f.graphic_v_end=mode->upper_margin + mode->yres;
1327         writel(graphic_v_disp.val, remapped_regs + mmGRAPHIC_V_DISP);
1328
1329         crtc_total.val = 0;
1330         crtc_total.f.crtc_h_total=mode->left_margin  + mode->xres + mode->right_margin;
1331         crtc_total.f.crtc_v_total=mode->upper_margin + mode->yres + mode->lower_margin;
1332         writel(crtc_total.val, remapped_regs + mmCRTC_TOTAL);
1333
1334         writel(mode->crtc_ss, remapped_regs + mmCRTC_SS);
1335         writel(mode->crtc_ls, remapped_regs + mmCRTC_LS);
1336         writel(mode->crtc_gs, remapped_regs + mmCRTC_GS);
1337         writel(mode->crtc_vpos_gs, remapped_regs + mmCRTC_VPOS_GS);
1338         writel(mode->crtc_rev, remapped_regs + mmCRTC_REV);
1339         writel(mode->crtc_dclk, remapped_regs + mmCRTC_DCLK);
1340         writel(mode->crtc_gclk, remapped_regs + mmCRTC_GCLK);
1341         writel(mode->crtc_goe, remapped_regs + mmCRTC_GOE);
1342         writel(mode->crtc_ps1_active, remapped_regs + mmCRTC_PS1_ACTIVE);
1343
1344         writel(regs->lcd_format, remapped_regs + mmLCD_FORMAT);
1345         writel(regs->lcdd_cntl1, remapped_regs + mmLCDD_CNTL1);
1346         writel(regs->lcdd_cntl2, remapped_regs + mmLCDD_CNTL2);
1347         writel(regs->genlcd_cntl1, remapped_regs + mmGENLCD_CNTL1);
1348         writel(regs->genlcd_cntl2, remapped_regs + mmGENLCD_CNTL2);
1349         writel(regs->genlcd_cntl3, remapped_regs + mmGENLCD_CNTL3);
1350
1351         writel(0x00000000, remapped_regs + mmCRTC_FRAME);
1352         writel(0x00000000, remapped_regs + mmCRTC_FRAME_VPOS);
1353         writel(0x00000000, remapped_regs + mmCRTC_DEFAULT_COUNT);
1354         writel(0x0000FF00, remapped_regs + mmLCD_BACKGROUND_COLOR);
1355
1356         /* Hack for overlay in ext memory */
1357         temp32 = readl(remapped_regs + mmDISP_DEBUG2);
1358         temp32 |= 0xc0000000;
1359         writel(temp32, remapped_regs + mmDISP_DEBUG2);
1360 }
1361
1362
1363 static void w100_setup_memory(struct w100fb_par *par)
1364 {
1365         union mc_ext_mem_location_u extmem_location;
1366         union mc_fb_location_u intmem_location;
1367         struct w100_mem_info *mem = par->mach->mem;
1368         struct w100_bm_mem_info *bm_mem = par->mach->bm_mem;
1369
1370         if (!par->extmem_active) {
1371                 w100_suspend(W100_SUSPEND_EXTMEM);
1372
1373                 /* Map Internal Memory at FB Base */
1374                 intmem_location.f.mc_fb_start = W100_FB_BASE >> 8;
1375                 intmem_location.f.mc_fb_top = (W100_FB_BASE+MEM_INT_SIZE) >> 8;
1376                 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
1377
1378                 /* Unmap External Memory - value is *probably* irrelevant but may have meaning
1379                    to acceleration libraries */
1380                 extmem_location.f.mc_ext_mem_start = MEM_EXT_BASE_VALUE >> 8;
1381                 extmem_location.f.mc_ext_mem_top = (MEM_EXT_BASE_VALUE-1) >> 8;
1382                 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
1383         } else {
1384                 /* Map Internal Memory to its default location */
1385                 intmem_location.f.mc_fb_start = MEM_INT_BASE_VALUE >> 8;
1386                 intmem_location.f.mc_fb_top = (MEM_INT_BASE_VALUE+MEM_INT_SIZE) >> 8;
1387                 writel((u32) (intmem_location.val), remapped_regs + mmMC_FB_LOCATION);
1388
1389                 /* Map External Memory at FB Base */
1390                 extmem_location.f.mc_ext_mem_start = W100_FB_BASE >> 8;
1391                 extmem_location.f.mc_ext_mem_top = (W100_FB_BASE+par->mach->mem->size) >> 8;
1392                 writel((u32) (extmem_location.val), remapped_regs + mmMC_EXT_MEM_LOCATION);
1393
1394                 writel(0x00007800, remapped_regs + mmMC_BIST_CTRL);
1395                 writel(mem->ext_cntl, remapped_regs + mmMEM_EXT_CNTL);
1396                 writel(0x00200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
1397                 udelay(100);
1398                 writel(0x80200021, remapped_regs + mmMEM_SDRAM_MODE_REG);
1399                 udelay(100);
1400                 writel(mem->sdram_mode_reg, remapped_regs + mmMEM_SDRAM_MODE_REG);
1401                 udelay(100);
1402                 writel(mem->ext_timing_cntl, remapped_regs + mmMEM_EXT_TIMING_CNTL);
1403                 writel(mem->io_cntl, remapped_regs + mmMEM_IO_CNTL);
1404                 if (bm_mem) {
1405                         writel(bm_mem->ext_mem_bw, remapped_regs + mmBM_EXT_MEM_BANDWIDTH);
1406                         writel(bm_mem->offset, remapped_regs + mmBM_OFFSET);
1407                         writel(bm_mem->ext_timing_ctl, remapped_regs + mmBM_MEM_EXT_TIMING_CNTL);
1408                         writel(bm_mem->ext_cntl, remapped_regs + mmBM_MEM_EXT_CNTL);
1409                         writel(bm_mem->mode_reg, remapped_regs + mmBM_MEM_MODE_REG);
1410                         writel(bm_mem->io_cntl, remapped_regs + mmBM_MEM_IO_CNTL);
1411                         writel(bm_mem->config, remapped_regs + mmBM_CONFIG);
1412                 }
1413         }
1414 }
1415
1416 static void w100_set_dispregs(struct w100fb_par *par)
1417 {
1418         unsigned long rot=0, divider, offset=0;
1419         union graphic_ctrl_u graphic_ctrl;
1420
1421         /* See if the mode has been rotated */
1422         if (par->xres == par->mode->xres) {
1423                 if (par->flip) {
1424                         rot=3; /* 180 degree */
1425                         offset=(par->xres * par->yres) - 1;
1426                 } /* else 0 degree */
1427                 divider = par->mode->pixclk_divider;
1428         } else {
1429                 if (par->flip) {
1430                         rot=2; /* 270 degree */
1431                         offset=par->xres - 1;
1432                 } else {
1433                         rot=1; /* 90 degree */
1434                         offset=par->xres * (par->yres - 1);
1435                 }
1436                 divider = par->mode->pixclk_divider_rotated;
1437         }
1438
1439         graphic_ctrl.val = 0; /* w32xx doesn't like undefined bits */
1440         switch (par->chip_id) {
1441                 case CHIP_ID_W100:
1442                         graphic_ctrl.f_w100.color_depth=6;
1443                         graphic_ctrl.f_w100.en_crtc=1;
1444                         graphic_ctrl.f_w100.en_graphic_req=1;
1445                         graphic_ctrl.f_w100.en_graphic_crtc=1;
1446                         graphic_ctrl.f_w100.lcd_pclk_on=1;
1447                         graphic_ctrl.f_w100.lcd_sclk_on=1;
1448                         graphic_ctrl.f_w100.low_power_on=0;
1449                         graphic_ctrl.f_w100.req_freq=0;
1450                         graphic_ctrl.f_w100.portrait_mode=rot;
1451
1452                         /* Zaurus needs this */
1453                         switch(par->xres) {
1454                                 case 240:
1455                                 case 320:
1456                                 default:
1457                                         graphic_ctrl.f_w100.total_req_graphic=0xa0;
1458                                         break;
1459                                 case 480:
1460                                 case 640:
1461                                         switch(rot) {
1462                                                 case 0:  /* 0 */
1463                                                 case 3:  /* 180 */
1464                                                         graphic_ctrl.f_w100.low_power_on=1;
1465                                                         graphic_ctrl.f_w100.req_freq=5;
1466                                                 break;
1467                                                 case 1:  /* 90 */
1468                                                 case 2:  /* 270 */
1469                                                         graphic_ctrl.f_w100.req_freq=4;
1470                                                         break;
1471                                                 default:
1472                                                         break;
1473                                         }
1474                                         graphic_ctrl.f_w100.total_req_graphic=0xf0;
1475                                         break;
1476                         }
1477                         break;
1478                 case CHIP_ID_W3200:
1479                 case CHIP_ID_W3220:
1480                         graphic_ctrl.f_w32xx.color_depth=6;
1481                         graphic_ctrl.f_w32xx.en_crtc=1;
1482                         graphic_ctrl.f_w32xx.en_graphic_req=1;
1483                         graphic_ctrl.f_w32xx.en_graphic_crtc=1;
1484                         graphic_ctrl.f_w32xx.lcd_pclk_on=1;
1485                         graphic_ctrl.f_w32xx.lcd_sclk_on=1;
1486                         graphic_ctrl.f_w32xx.low_power_on=0;
1487                         graphic_ctrl.f_w32xx.req_freq=0;
1488                         graphic_ctrl.f_w32xx.total_req_graphic=par->mode->xres >> 1; /* panel xres, not mode */
1489                         graphic_ctrl.f_w32xx.portrait_mode=rot;
1490                         break;
1491         }
1492
1493         /* Set the pixel clock source and divider */
1494         w100_pwr_state.pclk_cntl.f.pclk_src_sel = par->mode->pixclk_src;
1495         w100_pwr_state.pclk_cntl.f.pclk_post_div = divider;
1496         writel((u32) (w100_pwr_state.pclk_cntl.val), remapped_regs + mmPCLK_CNTL);
1497
1498         writel(graphic_ctrl.val, remapped_regs + mmGRAPHIC_CTRL);
1499         writel(W100_FB_BASE + ((offset * BITS_PER_PIXEL/8)&~0x03UL), remapped_regs + mmGRAPHIC_OFFSET);
1500         writel((par->xres*BITS_PER_PIXEL/8), remapped_regs + mmGRAPHIC_PITCH);
1501 }
1502
1503
1504 /*
1505  * Work out how long the sync pulse lasts
1506  * Value is 1/(time in seconds)
1507  */
1508 static void calc_hsync(struct w100fb_par *par)
1509 {
1510         unsigned long hsync;
1511         struct w100_mode *mode = par->mode;
1512         union crtc_ss_u crtc_ss;
1513
1514         if (mode->pixclk_src == CLK_SRC_XTAL)
1515                 hsync=par->mach->xtal_freq;
1516         else
1517                 hsync=((par->fastpll_mode && mode->fast_pll_freq) ? mode->fast_pll_freq : mode->pll_freq)*100000;
1518
1519         hsync /= (w100_pwr_state.pclk_cntl.f.pclk_post_div + 1);
1520
1521         crtc_ss.val = readl(remapped_regs + mmCRTC_SS);
1522         if (crtc_ss.val)
1523                 par->hsync_len = hsync / (crtc_ss.f.ss_end-crtc_ss.f.ss_start);
1524         else
1525                 par->hsync_len = 0;
1526 }
1527
1528 static void w100_suspend(u32 mode)
1529 {
1530         u32 val;
1531
1532         writel(0x7FFF8000, remapped_regs + mmMC_EXT_MEM_LOCATION);
1533         writel(0x00FF0000, remapped_regs + mmMC_PERF_MON_CNTL);
1534
1535         val = readl(remapped_regs + mmMEM_EXT_TIMING_CNTL);
1536         val &= ~(0x00100000);  /* bit20=0 */
1537         val |= 0xFF000000;     /* bit31:24=0xff */
1538         writel(val, remapped_regs + mmMEM_EXT_TIMING_CNTL);
1539
1540         val = readl(remapped_regs + mmMEM_EXT_CNTL);
1541         val &= ~(0x00040000);  /* bit18=0 */
1542         val |= 0x00080000;     /* bit19=1 */
1543         writel(val, remapped_regs + mmMEM_EXT_CNTL);
1544
1545         udelay(1);  /* wait 1us */
1546
1547         if (mode == W100_SUSPEND_EXTMEM) {
1548                 /* CKE: Tri-State */
1549                 val = readl(remapped_regs + mmMEM_EXT_CNTL);
1550                 val |= 0x40000000;  /* bit30=1 */
1551                 writel(val, remapped_regs + mmMEM_EXT_CNTL);
1552
1553                 /* CLK: Stop */
1554                 val = readl(remapped_regs + mmMEM_EXT_CNTL);
1555                 val &= ~(0x00000001);  /* bit0=0 */
1556                 writel(val, remapped_regs + mmMEM_EXT_CNTL);
1557         } else {
1558                 writel(0x00000000, remapped_regs + mmSCLK_CNTL);
1559                 writel(0x000000BF, remapped_regs + mmCLK_PIN_CNTL);
1560                 writel(0x00000015, remapped_regs + mmPWRMGT_CNTL);
1561
1562                 udelay(5);
1563
1564                 val = readl(remapped_regs + mmPLL_CNTL);
1565                 val |= 0x00000004;  /* bit2=1 */
1566                 writel(val, remapped_regs + mmPLL_CNTL);
1567                 writel(0x0000001d, remapped_regs + mmPWRMGT_CNTL);
1568         }
1569 }
1570
1571 static void w100_vsync(void)
1572 {
1573         u32 tmp;
1574         int timeout = 30000;  /* VSync timeout = 30[ms] > 16.8[ms] */
1575
1576         tmp = readl(remapped_regs + mmACTIVE_V_DISP);
1577
1578         /* set vline pos  */
1579         writel((tmp >> 16) & 0x3ff, remapped_regs + mmDISP_INT_CNTL);
1580
1581         /* disable vline irq */
1582         tmp = readl(remapped_regs + mmGEN_INT_CNTL);
1583
1584         tmp &= ~0x00000002;
1585         writel(tmp, remapped_regs + mmGEN_INT_CNTL);
1586
1587         /* clear vline irq status */
1588         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1589
1590         /* enable vline irq */
1591         writel((tmp | 0x00000002), remapped_regs + mmGEN_INT_CNTL);
1592
1593         /* clear vline irq status */
1594         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1595
1596         while(timeout > 0) {
1597                 if (readl(remapped_regs + mmGEN_INT_STATUS) & 0x00000002)
1598                         break;
1599                 udelay(1);
1600                 timeout--;
1601         }
1602
1603         /* disable vline irq */
1604         writel(tmp, remapped_regs + mmGEN_INT_CNTL);
1605
1606         /* clear vline irq status */
1607         writel(0x00000002, remapped_regs + mmGEN_INT_STATUS);
1608 }
1609
1610 static struct platform_driver w100fb_driver = {
1611         .probe          = w100fb_probe,
1612         .remove         = w100fb_remove,
1613         .suspend        = w100fb_suspend,
1614         .resume         = w100fb_resume,
1615         .driver         = {
1616                 .name   = "w100fb",
1617         },
1618 };
1619
1620 int __devinit w100fb_init(void)
1621 {
1622         return platform_driver_register(&w100fb_driver);
1623 }
1624
1625 void __exit w100fb_cleanup(void)
1626 {
1627         platform_driver_unregister(&w100fb_driver);
1628 }
1629
1630 module_init(w100fb_init);
1631 module_exit(w100fb_cleanup);
1632
1633 MODULE_DESCRIPTION("ATI Imageon w100 framebuffer driver");
1634 MODULE_LICENSE("GPL");