Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
[linux-2.6] / arch / arm / mach-pxa / cm-x255.c
1 /*
2  * linux/arch/arm/mach-pxa/cm-x255.c
3  *
4  * Copyright (C) 2007, 2008 CompuLab, Ltd.
5  * Mike Rapoport <mike@compulab.co.il>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11
12 #include <linux/platform_device.h>
13 #include <linux/irq.h>
14 #include <linux/gpio.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mtd/physmap.h>
17 #include <linux/mtd/nand-gpio.h>
18
19 #include <linux/spi/spi.h>
20
21 #include <asm/mach/arch.h>
22 #include <asm/mach-types.h>
23 #include <asm/mach/map.h>
24
25 #include <mach/pxa25x.h>
26 #include <mach/pxa2xx_spi.h>
27
28 #include "generic.h"
29
30 #define GPIO_NAND_CS    (5)
31 #define GPIO_NAND_ALE   (4)
32 #define GPIO_NAND_CLE   (3)
33 #define GPIO_NAND_RB    (10)
34
35 static unsigned long cmx255_pin_config[] = {
36         /* AC'97 */
37         GPIO28_AC97_BITCLK,
38         GPIO29_AC97_SDATA_IN_0,
39         GPIO30_AC97_SDATA_OUT,
40         GPIO31_AC97_SYNC,
41
42         /* BTUART */
43         GPIO42_BTUART_RXD,
44         GPIO43_BTUART_TXD,
45         GPIO44_BTUART_CTS,
46         GPIO45_BTUART_RTS,
47
48         /* STUART */
49         GPIO46_STUART_RXD,
50         GPIO47_STUART_TXD,
51
52         /* LCD */
53         GPIO58_LCD_LDD_0,
54         GPIO59_LCD_LDD_1,
55         GPIO60_LCD_LDD_2,
56         GPIO61_LCD_LDD_3,
57         GPIO62_LCD_LDD_4,
58         GPIO63_LCD_LDD_5,
59         GPIO64_LCD_LDD_6,
60         GPIO65_LCD_LDD_7,
61         GPIO66_LCD_LDD_8,
62         GPIO67_LCD_LDD_9,
63         GPIO68_LCD_LDD_10,
64         GPIO69_LCD_LDD_11,
65         GPIO70_LCD_LDD_12,
66         GPIO71_LCD_LDD_13,
67         GPIO72_LCD_LDD_14,
68         GPIO73_LCD_LDD_15,
69         GPIO74_LCD_FCLK,
70         GPIO75_LCD_LCLK,
71         GPIO76_LCD_PCLK,
72         GPIO77_LCD_BIAS,
73
74         /* SSP1 */
75         GPIO23_SSP1_SCLK,
76         GPIO24_SSP1_SFRM,
77         GPIO25_SSP1_TXD,
78         GPIO26_SSP1_RXD,
79
80         /* SSP2 */
81         GPIO81_SSP2_CLK_OUT,
82         GPIO82_SSP2_FRM_OUT,
83         GPIO83_SSP2_TXD,
84         GPIO84_SSP2_RXD,
85
86         /* PC Card */
87         GPIO48_nPOE,
88         GPIO49_nPWE,
89         GPIO50_nPIOR,
90         GPIO51_nPIOW,
91         GPIO52_nPCE_1,
92         GPIO53_nPCE_2,
93         GPIO54_nPSKTSEL,
94         GPIO55_nPREG,
95         GPIO56_nPWAIT,
96         GPIO57_nIOIS16,
97
98         /* SDRAM and local bus */
99         GPIO15_nCS_1,
100         GPIO78_nCS_2,
101         GPIO79_nCS_3,
102         GPIO80_nCS_4,
103         GPIO33_nCS_5,
104         GPIO18_RDY,
105
106         /* GPIO */
107         GPIO0_GPIO      | WAKEUP_ON_EDGE_BOTH,
108         GPIO9_GPIO,                             /* PC card reset */
109
110         /* NAND controls */
111         GPIO5_GPIO      | MFP_LPM_DRIVE_HIGH,   /* NAND CE# */
112         GPIO4_GPIO      | MFP_LPM_DRIVE_LOW,    /* NAND ALE */
113         GPIO3_GPIO      | MFP_LPM_DRIVE_LOW,    /* NAND CLE */
114         GPIO10_GPIO,                            /* NAND Ready/Busy */
115
116         /* interrupts */
117         GPIO22_GPIO,    /* DM9000 interrupt */
118 };
119
120 #if defined(CONFIG_SPI_PXA2XX)
121 static struct pxa2xx_spi_master pxa_ssp_master_info = {
122         .num_chipselect = 1,
123 };
124
125 static struct spi_board_info spi_board_info[] __initdata = {
126         [0] = {
127                 .modalias       = "rtc-max6902",
128                 .max_speed_hz   = 1000000,
129                 .bus_num        = 1,
130                 .chip_select    = 0,
131         },
132 };
133
134 static void __init cmx255_init_rtc(void)
135 {
136         pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
137         spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
138 }
139 #else
140 static inline void cmx255_init_rtc(void) {}
141 #endif
142
143 #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
144 static struct mtd_partition cmx255_nor_partitions[] = {
145         {
146                 .name           = "ARMmon",
147                 .size           = 0x00030000,
148                 .offset         = 0,
149                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
150         } , {
151                 .name           = "ARMmon setup block",
152                 .size           = 0x00010000,
153                 .offset         = MTDPART_OFS_APPEND,
154                 .mask_flags     = MTD_WRITEABLE  /* force read-only */
155         } , {
156                 .name           = "kernel",
157                 .size           = 0x00160000,
158                 .offset         = MTDPART_OFS_APPEND,
159         } , {
160                 .name           = "ramdisk",
161                 .size           = MTDPART_SIZ_FULL,
162                 .offset         = MTDPART_OFS_APPEND
163         }
164 };
165
166 static struct physmap_flash_data cmx255_nor_flash_data[] = {
167         {
168                 .width          = 2,    /* bankwidth in bytes */
169                 .parts          = cmx255_nor_partitions,
170                 .nr_parts       = ARRAY_SIZE(cmx255_nor_partitions)
171         }
172 };
173
174 static struct resource cmx255_nor_resource = {
175         .start  = PXA_CS0_PHYS,
176         .end    = PXA_CS0_PHYS + SZ_8M - 1,
177         .flags  = IORESOURCE_MEM,
178 };
179
180 static struct platform_device cmx255_nor = {
181         .name   = "physmap-flash",
182         .id     = -1,
183         .dev    = {
184                 .platform_data = cmx255_nor_flash_data,
185         },
186         .resource = &cmx255_nor_resource,
187         .num_resources = 1,
188 };
189
190 static void __init cmx255_init_nor(void)
191 {
192         platform_device_register(&cmx255_nor);
193 }
194 #else
195 static inline void cmx255_init_nor(void) {}
196 #endif
197
198 #if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
199 static struct resource cmx255_nand_resource[] = {
200         [0] = {
201                 .start = PXA_CS1_PHYS,
202                 .end   = PXA_CS1_PHYS + 11,
203                 .flags = IORESOURCE_MEM,
204         },
205         [1] = {
206                 .start = PXA_CS5_PHYS,
207                 .end   = PXA_CS5_PHYS + 3,
208                 .flags = IORESOURCE_MEM,
209         },
210 };
211
212 static struct mtd_partition cmx255_nand_parts[] = {
213         [0] = {
214                 .name   = "cmx255-nand",
215                 .size   = MTDPART_SIZ_FULL,
216                 .offset = 0,
217         },
218 };
219
220 static struct gpio_nand_platdata cmx255_nand_platdata = {
221         .gpio_nce = GPIO_NAND_CS,
222         .gpio_cle = GPIO_NAND_CLE,
223         .gpio_ale = GPIO_NAND_ALE,
224         .gpio_rdy = GPIO_NAND_RB,
225         .gpio_nwp = -1,
226         .parts = cmx255_nand_parts,
227         .num_parts = ARRAY_SIZE(cmx255_nand_parts),
228         .chip_delay = 25,
229 };
230
231 static struct platform_device cmx255_nand = {
232         .name           = "gpio-nand",
233         .num_resources  = ARRAY_SIZE(cmx255_nand_resource),
234         .resource       = cmx255_nand_resource,
235         .id             = -1,
236         .dev            = {
237                 .platform_data = &cmx255_nand_platdata,
238         }
239 };
240
241 static void __init cmx255_init_nand(void)
242 {
243         platform_device_register(&cmx255_nand);
244 }
245 #else
246 static inline void cmx255_init_nand(void) {}
247 #endif
248
249 void __init cmx255_init(void)
250 {
251         pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
252
253         cmx255_init_rtc();
254         cmx255_init_nor();
255         cmx255_init_nand();
256 }