2 * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
3 * IDE driver for Linux.
5 * Copyright (c) 2000-2002 Vojtech Pavlik
6 * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
8 * Based on the work of:
13 * This program is free software; you can redistribute it and/or modify it
14 * under the terms of the GNU General Public License version 2 as published by
15 * the Free Software Foundation.
18 #include <linux/module.h>
19 #include <linux/kernel.h>
20 #include <linux/pci.h>
21 #include <linux/init.h>
22 #include <linux/ide.h>
24 #define DRV_NAME "amd74xx"
27 AMD_IDE_CONFIG = 0x41,
28 AMD_CABLE_DETECT = 0x42,
29 AMD_DRIVE_TIMING = 0x48,
30 AMD_8BIT_TIMING = 0x4e,
31 AMD_ADDRESS_SETUP = 0x4c,
32 AMD_UDMA_TIMING = 0x50,
35 static unsigned int amd_80w;
36 static unsigned int amd_clock;
38 static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
39 static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
41 static inline u8 amd_offset(struct pci_dev *dev)
43 return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
47 * amd_set_speed() writes timing values to the chipset registers
50 static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
51 struct ide_timing *timing)
53 u8 t = 0, offset = amd_offset(dev);
55 pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
56 t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
57 pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
59 pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
60 ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
62 pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
63 ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
66 case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
67 case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
68 case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
69 case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
73 pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
77 * amd_set_drive() computes timing values and configures the chipset
78 * to a desired transfer mode. It also can be called by upper layers.
81 static void amd_set_drive(ide_drive_t *drive, const u8 speed)
83 ide_hwif_t *hwif = drive->hwif;
84 struct pci_dev *dev = to_pci_dev(hwif->dev);
85 ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
86 struct ide_timing t, p;
88 u8 udma_mask = hwif->ultra_mask;
90 T = 1000000000 / amd_clock;
91 UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
93 ide_timing_compute(drive, speed, &t, T, UT);
96 ide_timing_compute(peer, peer->current_speed, &p, T, UT);
97 ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
100 if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
101 if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
103 amd_set_speed(dev, drive->dn, udma_mask, &t);
107 * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
110 static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
112 amd_set_drive(drive, XFER_PIO_0 + pio);
115 static void __devinit amd7409_cable_detect(struct pci_dev *dev)
117 /* no host side cable detection */
121 static void __devinit amd7411_cable_detect(struct pci_dev *dev)
125 u8 t = 0, offset = amd_offset(dev);
127 pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
128 pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
129 amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
130 for (i = 24; i >= 0; i -= 8)
131 if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
132 printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
133 "cable bits correctly. Enabling workaround.\n",
135 amd_80w |= (1 << (1 - (i >> 4)));
140 * The initialization callback. Initialize drive independent registers.
143 static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev)
145 u8 t = 0, offset = amd_offset(dev);
148 * Check 80-wire cable presence.
151 if (dev->vendor == PCI_VENDOR_ID_AMD &&
152 dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
154 else if (dev->vendor == PCI_VENDOR_ID_AMD &&
155 dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
156 amd7409_cable_detect(dev);
158 amd7411_cable_detect(dev);
161 * Take care of prefetch & postwrite.
164 pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
166 * Check for broken FIFO support.
168 if (dev->vendor == PCI_VENDOR_ID_AMD &&
169 dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
173 pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
178 static u8 amd_cable_detect(ide_hwif_t *hwif)
180 if ((amd_80w >> hwif->channel) & 1)
181 return ATA_CBL_PATA80;
183 return ATA_CBL_PATA40;
186 static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
188 struct pci_dev *dev = to_pci_dev(hwif->dev);
190 if (hwif->irq == 0) /* 0 is bogus but will do for now */
191 hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
194 static const struct ide_port_ops amd_port_ops = {
195 .set_pio_mode = amd_set_pio_mode,
196 .set_dma_mode = amd_set_drive,
197 .cable_detect = amd_cable_detect,
200 #define IDE_HFLAGS_AMD \
201 (IDE_HFLAG_PIO_NO_BLACKLIST | \
202 IDE_HFLAG_POST_SET_MODE | \
203 IDE_HFLAG_IO_32BIT | \
204 IDE_HFLAG_UNMASK_IRQS)
206 #define DECLARE_AMD_DEV(swdma, udma) \
209 .init_chipset = init_chipset_amd74xx, \
210 .init_hwif = init_hwif_amd74xx, \
211 .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
212 .port_ops = &amd_port_ops, \
213 .host_flags = IDE_HFLAGS_AMD, \
214 .pio_mask = ATA_PIO5, \
215 .swdma_mask = swdma, \
216 .mwdma_mask = ATA_MWDMA2, \
220 #define DECLARE_NV_DEV(udma) \
223 .init_chipset = init_chipset_amd74xx, \
224 .init_hwif = init_hwif_amd74xx, \
225 .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
226 .port_ops = &amd_port_ops, \
227 .host_flags = IDE_HFLAGS_AMD, \
228 .pio_mask = ATA_PIO5, \
229 .swdma_mask = ATA_SWDMA2, \
230 .mwdma_mask = ATA_MWDMA2, \
234 static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
235 /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
236 /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
237 /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
238 /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
240 /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
241 /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),
243 /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
246 static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
248 struct ide_port_info d;
249 u8 idx = id->driver_data;
251 d = amd74xx_chipsets[idx];
254 * Check for bad SWDMA and incorrectly wired Serenade mainboards.
257 if (dev->revision <= 7)
259 d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
260 } else if (idx == 3) {
261 if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
262 dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
263 d.udma_mask = ATA_UDMA5;
266 printk(KERN_INFO "%s %s: UDMA%s controller\n",
267 d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
270 * Determine the system bus clock.
272 amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
275 case 33000: amd_clock = 33333; break;
276 case 37000: amd_clock = 37500; break;
277 case 41000: amd_clock = 41666; break;
280 if (amd_clock < 20000 || amd_clock > 50000) {
281 printk(KERN_WARNING "%s: User given PCI clock speed impossible"
282 " (%d), using 33 MHz instead.\n",
287 return ide_pci_init_one(dev, &d, NULL);
290 static const struct pci_device_id amd74xx_pci_tbl[] = {
291 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
292 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
293 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
294 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
295 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
296 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
297 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
298 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
299 #ifdef CONFIG_BLK_DEV_IDE_SATA
300 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
302 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
303 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
304 #ifdef CONFIG_BLK_DEV_IDE_SATA
305 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
306 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
308 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
309 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
310 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
311 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
312 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
313 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
314 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
315 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
316 { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
317 { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
320 MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
322 static struct pci_driver driver = {
324 .id_table = amd74xx_pci_tbl,
325 .probe = amd74xx_probe,
326 .remove = ide_pci_remove,
329 static int __init amd74xx_ide_init(void)
331 return ide_pci_register_driver(&driver);
334 static void __exit amd74xx_ide_exit(void)
336 pci_unregister_driver(&driver);
339 module_init(amd74xx_ide_init);
340 module_exit(amd74xx_ide_exit);
342 MODULE_AUTHOR("Vojtech Pavlik");
343 MODULE_DESCRIPTION("AMD PCI IDE driver");
344 MODULE_LICENSE("GPL");