Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
[linux-2.6] / drivers / acpi / events / evregion.c
1 /******************************************************************************
2  *
3  * Module Name: evregion - ACPI address_space (op_region) handler dispatch
4  *
5  *****************************************************************************/
6
7 /*
8  * Copyright (C) 2000 - 2007, R. Byron Moore
9  * All rights reserved.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions, and the following disclaimer,
16  *    without modification.
17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18  *    substantially similar to the "NO WARRANTY" disclaimer below
19  *    ("Disclaimer") and any redistribution must be conditioned upon
20  *    including a substantially similar Disclaimer requirement for further
21  *    binary redistribution.
22  * 3. Neither the names of the above-listed copyright holders nor the names
23  *    of any contributors may be used to endorse or promote products derived
24  *    from this software without specific prior written permission.
25  *
26  * Alternatively, this software may be distributed under the terms of the
27  * GNU General Public License ("GPL") version 2 as published by the Free
28  * Software Foundation.
29  *
30  * NO WARRANTY
31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41  * POSSIBILITY OF SUCH DAMAGES.
42  */
43
44 #include <acpi/acpi.h>
45 #include <acpi/acevents.h>
46 #include <acpi/acnamesp.h>
47 #include <acpi/acinterp.h>
48
49 #define _COMPONENT          ACPI_EVENTS
50 ACPI_MODULE_NAME("evregion")
51 #define ACPI_NUM_DEFAULT_SPACES     4
52 static u8 acpi_gbl_default_address_spaces[ACPI_NUM_DEFAULT_SPACES] = {
53         ACPI_ADR_SPACE_SYSTEM_MEMORY,
54         ACPI_ADR_SPACE_SYSTEM_IO,
55         ACPI_ADR_SPACE_PCI_CONFIG,
56         ACPI_ADR_SPACE_DATA_TABLE
57 };
58
59 /* Local prototypes */
60
61 static acpi_status
62 acpi_ev_reg_run(acpi_handle obj_handle,
63                 u32 level, void *context, void **return_value);
64
65 static acpi_status
66 acpi_ev_install_handler(acpi_handle obj_handle,
67                         u32 level, void *context, void **return_value);
68
69 /*******************************************************************************
70  *
71  * FUNCTION:    acpi_ev_install_region_handlers
72  *
73  * PARAMETERS:  None
74  *
75  * RETURN:      Status
76  *
77  * DESCRIPTION: Installs the core subsystem default address space handlers.
78  *
79  ******************************************************************************/
80
81 acpi_status acpi_ev_install_region_handlers(void)
82 {
83         acpi_status status;
84         acpi_native_uint i;
85
86         ACPI_FUNCTION_TRACE(ev_install_region_handlers);
87
88         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
89         if (ACPI_FAILURE(status)) {
90                 return_ACPI_STATUS(status);
91         }
92
93         /*
94          * All address spaces (PCI Config, EC, SMBus) are scope dependent
95          * and registration must occur for a specific device.
96          *
97          * In the case of the system memory and IO address spaces there is currently
98          * no device associated with the address space.  For these we use the root.
99          *
100          * We install the default PCI config space handler at the root so
101          * that this space is immediately available even though the we have
102          * not enumerated all the PCI Root Buses yet.  This is to conform
103          * to the ACPI specification which states that the PCI config
104          * space must be always available -- even though we are nowhere
105          * near ready to find the PCI root buses at this point.
106          *
107          * NOTE: We ignore AE_ALREADY_EXISTS because this means that a handler
108          * has already been installed (via acpi_install_address_space_handler).
109          * Similar for AE_SAME_HANDLER.
110          */
111         for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
112                 status = acpi_ev_install_space_handler(acpi_gbl_root_node,
113                                                        acpi_gbl_default_address_spaces
114                                                        [i],
115                                                        ACPI_DEFAULT_HANDLER,
116                                                        NULL, NULL);
117                 switch (status) {
118                 case AE_OK:
119                 case AE_SAME_HANDLER:
120                 case AE_ALREADY_EXISTS:
121
122                         /* These exceptions are all OK */
123
124                         status = AE_OK;
125                         break;
126
127                 default:
128
129                         goto unlock_and_exit;
130                 }
131         }
132
133       unlock_and_exit:
134         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
135         return_ACPI_STATUS(status);
136 }
137
138 /*******************************************************************************
139  *
140  * FUNCTION:    acpi_ev_initialize_op_regions
141  *
142  * PARAMETERS:  None
143  *
144  * RETURN:      Status
145  *
146  * DESCRIPTION: Execute _REG methods for all Operation Regions that have
147  *              an installed default region handler.
148  *
149  ******************************************************************************/
150
151 acpi_status acpi_ev_initialize_op_regions(void)
152 {
153         acpi_status status;
154         acpi_native_uint i;
155
156         ACPI_FUNCTION_TRACE(ev_initialize_op_regions);
157
158         status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
159         if (ACPI_FAILURE(status)) {
160                 return_ACPI_STATUS(status);
161         }
162
163         /*
164          * Run the _REG methods for op_regions in each default address space
165          */
166         for (i = 0; i < ACPI_NUM_DEFAULT_SPACES; i++) {
167
168                 /* TBD: Make sure handler is the DEFAULT handler, otherwise
169                  * _REG will have already been run.
170                  */
171                 status = acpi_ev_execute_reg_methods(acpi_gbl_root_node,
172                                                      acpi_gbl_default_address_spaces
173                                                      [i]);
174         }
175
176         (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
177         return_ACPI_STATUS(status);
178 }
179
180 /*******************************************************************************
181  *
182  * FUNCTION:    acpi_ev_execute_reg_method
183  *
184  * PARAMETERS:  region_obj          - Region object
185  *              Function            - Passed to _REG: On (1) or Off (0)
186  *
187  * RETURN:      Status
188  *
189  * DESCRIPTION: Execute _REG method for a region
190  *
191  ******************************************************************************/
192
193 acpi_status
194 acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
195 {
196         struct acpi_evaluate_info *info;
197         union acpi_operand_object *args[3];
198         union acpi_operand_object *region_obj2;
199         acpi_status status;
200
201         ACPI_FUNCTION_TRACE(ev_execute_reg_method);
202
203         region_obj2 = acpi_ns_get_secondary_object(region_obj);
204         if (!region_obj2) {
205                 return_ACPI_STATUS(AE_NOT_EXIST);
206         }
207
208         if (region_obj2->extra.method_REG == NULL) {
209                 return_ACPI_STATUS(AE_OK);
210         }
211
212         /* Allocate and initialize the evaluation information block */
213
214         info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_evaluate_info));
215         if (!info) {
216                 return_ACPI_STATUS(AE_NO_MEMORY);
217         }
218
219         info->prefix_node = region_obj2->extra.method_REG;
220         info->pathname = NULL;
221         info->parameters = args;
222         info->parameter_type = ACPI_PARAM_ARGS;
223         info->flags = ACPI_IGNORE_RETURN_VALUE;
224
225         /*
226          * The _REG method has two arguments:
227          *
228          * Arg0 - Integer:
229          *  Operation region space ID Same value as region_obj->Region.space_id
230          *
231          * Arg1 - Integer:
232          *  connection status 1 for connecting the handler, 0 for disconnecting
233          *  the handler (Passed as a parameter)
234          */
235         args[0] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
236         if (!args[0]) {
237                 status = AE_NO_MEMORY;
238                 goto cleanup1;
239         }
240
241         args[1] = acpi_ut_create_internal_object(ACPI_TYPE_INTEGER);
242         if (!args[1]) {
243                 status = AE_NO_MEMORY;
244                 goto cleanup2;
245         }
246
247         /* Setup the parameter objects */
248
249         args[0]->integer.value = region_obj->region.space_id;
250         args[1]->integer.value = function;
251         args[2] = NULL;
252
253         /* Execute the method, no return value */
254
255         ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
256                         (ACPI_TYPE_METHOD, info->prefix_node, NULL));
257
258         status = acpi_ns_evaluate(info);
259         acpi_ut_remove_reference(args[1]);
260
261       cleanup2:
262         acpi_ut_remove_reference(args[0]);
263
264       cleanup1:
265         ACPI_FREE(info);
266         return_ACPI_STATUS(status);
267 }
268
269 /*******************************************************************************
270  *
271  * FUNCTION:    acpi_ev_address_space_dispatch
272  *
273  * PARAMETERS:  region_obj          - Internal region object
274  *              Function            - Read or Write operation
275  *              Address             - Where in the space to read or write
276  *              bit_width           - Field width in bits (8, 16, 32, or 64)
277  *              Value               - Pointer to in or out value, must be
278  *                                    full 64-bit acpi_integer
279  *
280  * RETURN:      Status
281  *
282  * DESCRIPTION: Dispatch an address space or operation region access to
283  *              a previously installed handler.
284  *
285  ******************************************************************************/
286
287 acpi_status
288 acpi_ev_address_space_dispatch(union acpi_operand_object *region_obj,
289                                u32 function,
290                                acpi_physical_address address,
291                                u32 bit_width, acpi_integer * value)
292 {
293         acpi_status status;
294         acpi_adr_space_handler handler;
295         acpi_adr_space_setup region_setup;
296         union acpi_operand_object *handler_desc;
297         union acpi_operand_object *region_obj2;
298         void *region_context = NULL;
299
300         ACPI_FUNCTION_TRACE(ev_address_space_dispatch);
301
302         region_obj2 = acpi_ns_get_secondary_object(region_obj);
303         if (!region_obj2) {
304                 return_ACPI_STATUS(AE_NOT_EXIST);
305         }
306
307         /* Ensure that there is a handler associated with this region */
308
309         handler_desc = region_obj->region.handler;
310         if (!handler_desc) {
311                 ACPI_ERROR((AE_INFO,
312                             "No handler for Region [%4.4s] (%p) [%s]",
313                             acpi_ut_get_node_name(region_obj->region.node),
314                             region_obj,
315                             acpi_ut_get_region_name(region_obj->region.
316                                                     space_id)));
317
318                 return_ACPI_STATUS(AE_NOT_EXIST);
319         }
320
321         /*
322          * It may be the case that the region has never been initialized
323          * Some types of regions require special init code
324          */
325         if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
326                 /*
327                  * This region has not been initialized yet, do it
328                  */
329                 region_setup = handler_desc->address_space.setup;
330                 if (!region_setup) {
331
332                         /* No initialization routine, exit with error */
333
334                         ACPI_ERROR((AE_INFO,
335                                     "No init routine for region(%p) [%s]",
336                                     region_obj,
337                                     acpi_ut_get_region_name(region_obj->region.
338                                                             space_id)));
339                         return_ACPI_STATUS(AE_NOT_EXIST);
340                 }
341
342                 /*
343                  * We must exit the interpreter because the region
344                  * setup will potentially execute control methods
345                  * (e.g., _REG method for this region)
346                  */
347                 acpi_ex_exit_interpreter();
348
349                 status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
350                                       handler_desc->address_space.context,
351                                       &region_context);
352
353                 /* Re-enter the interpreter */
354
355                 acpi_ex_enter_interpreter();
356
357                 /* Check for failure of the Region Setup */
358
359                 if (ACPI_FAILURE(status)) {
360                         ACPI_EXCEPTION((AE_INFO, status,
361                                         "During region initialization: [%s]",
362                                         acpi_ut_get_region_name(region_obj->
363                                                                 region.
364                                                                 space_id)));
365                         return_ACPI_STATUS(status);
366                 }
367
368                 /*
369                  * Region initialization may have been completed by region_setup
370                  */
371                 if (!(region_obj->region.flags & AOPOBJ_SETUP_COMPLETE)) {
372                         region_obj->region.flags |= AOPOBJ_SETUP_COMPLETE;
373
374                         if (region_obj2->extra.region_context) {
375
376                                 /* The handler for this region was already installed */
377
378                                 ACPI_FREE(region_context);
379                         } else {
380                                 /*
381                                  * Save the returned context for use in all accesses to
382                                  * this particular region
383                                  */
384                                 region_obj2->extra.region_context =
385                                     region_context;
386                         }
387                 }
388         }
389
390         /* We have everything we need, we can invoke the address space handler */
391
392         handler = handler_desc->address_space.handler;
393
394         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
395                           "Handler %p (@%p) Address %8.8X%8.8X [%s]\n",
396                           &region_obj->region.handler->address_space, handler,
397                           ACPI_FORMAT_UINT64(address),
398                           acpi_ut_get_region_name(region_obj->region.
399                                                   space_id)));
400
401         if (!(handler_desc->address_space.handler_flags &
402               ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
403                 /*
404                  * For handlers other than the default (supplied) handlers, we must
405                  * exit the interpreter because the handler *might* block -- we don't
406                  * know what it will do, so we can't hold the lock on the intepreter.
407                  */
408                 acpi_ex_exit_interpreter();
409         }
410
411         /* Call the handler */
412
413         status = handler(function, address, bit_width, value,
414                          handler_desc->address_space.context,
415                          region_obj2->extra.region_context);
416
417         if (ACPI_FAILURE(status)) {
418                 ACPI_EXCEPTION((AE_INFO, status, "Returned by Handler for [%s]",
419                                 acpi_ut_get_region_name(region_obj->region.
420                                                         space_id)));
421         }
422
423         if (!(handler_desc->address_space.handler_flags &
424               ACPI_ADDR_HANDLER_DEFAULT_INSTALLED)) {
425                 /*
426                  * We just returned from a non-default handler, we must re-enter the
427                  * interpreter
428                  */
429                 acpi_ex_enter_interpreter();
430         }
431
432         return_ACPI_STATUS(status);
433 }
434
435 /*******************************************************************************
436  *
437  * FUNCTION:    acpi_ev_detach_region
438  *
439  * PARAMETERS:  region_obj          - Region Object
440  *              acpi_ns_is_locked   - Namespace Region Already Locked?
441  *
442  * RETURN:      None
443  *
444  * DESCRIPTION: Break the association between the handler and the region
445  *              this is a two way association.
446  *
447  ******************************************************************************/
448
449 void
450 acpi_ev_detach_region(union acpi_operand_object *region_obj,
451                       u8 acpi_ns_is_locked)
452 {
453         union acpi_operand_object *handler_obj;
454         union acpi_operand_object *obj_desc;
455         union acpi_operand_object **last_obj_ptr;
456         acpi_adr_space_setup region_setup;
457         void **region_context;
458         union acpi_operand_object *region_obj2;
459         acpi_status status;
460
461         ACPI_FUNCTION_TRACE(ev_detach_region);
462
463         region_obj2 = acpi_ns_get_secondary_object(region_obj);
464         if (!region_obj2) {
465                 return_VOID;
466         }
467         region_context = &region_obj2->extra.region_context;
468
469         /* Get the address handler from the region object */
470
471         handler_obj = region_obj->region.handler;
472         if (!handler_obj) {
473
474                 /* This region has no handler, all done */
475
476                 return_VOID;
477         }
478
479         /* Find this region in the handler's list */
480
481         obj_desc = handler_obj->address_space.region_list;
482         last_obj_ptr = &handler_obj->address_space.region_list;
483
484         while (obj_desc) {
485
486                 /* Is this the correct Region? */
487
488                 if (obj_desc == region_obj) {
489                         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
490                                           "Removing Region %p from address handler %p\n",
491                                           region_obj, handler_obj));
492
493                         /* This is it, remove it from the handler's list */
494
495                         *last_obj_ptr = obj_desc->region.next;
496                         obj_desc->region.next = NULL;   /* Must clear field */
497
498                         if (acpi_ns_is_locked) {
499                                 status =
500                                     acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
501                                 if (ACPI_FAILURE(status)) {
502                                         return_VOID;
503                                 }
504                         }
505
506                         /* Now stop region accesses by executing the _REG method */
507
508                         status = acpi_ev_execute_reg_method(region_obj, 0);
509                         if (ACPI_FAILURE(status)) {
510                                 ACPI_EXCEPTION((AE_INFO, status,
511                                                 "from region _REG, [%s]",
512                                                 acpi_ut_get_region_name
513                                                 (region_obj->region.space_id)));
514                         }
515
516                         if (acpi_ns_is_locked) {
517                                 status =
518                                     acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
519                                 if (ACPI_FAILURE(status)) {
520                                         return_VOID;
521                                 }
522                         }
523
524                         /*
525                          * If the region has been activated, call the setup handler
526                          * with the deactivate notification
527                          */
528                         if (region_obj->region.flags & AOPOBJ_SETUP_COMPLETE) {
529                                 region_setup = handler_obj->address_space.setup;
530                                 status =
531                                     region_setup(region_obj,
532                                                  ACPI_REGION_DEACTIVATE,
533                                                  handler_obj->address_space.
534                                                  context, region_context);
535
536                                 /* Init routine may fail, Just ignore errors */
537
538                                 if (ACPI_FAILURE(status)) {
539                                         ACPI_EXCEPTION((AE_INFO, status,
540                                                         "from region handler - deactivate, [%s]",
541                                                         acpi_ut_get_region_name
542                                                         (region_obj->region.
543                                                          space_id)));
544                                 }
545
546                                 region_obj->region.flags &=
547                                     ~(AOPOBJ_SETUP_COMPLETE);
548                         }
549
550                         /*
551                          * Remove handler reference in the region
552                          *
553                          * NOTE: this doesn't mean that the region goes away, the region
554                          * is just inaccessible as indicated to the _REG method
555                          *
556                          * If the region is on the handler's list, this must be the
557                          * region's handler
558                          */
559                         region_obj->region.handler = NULL;
560                         acpi_ut_remove_reference(handler_obj);
561
562                         return_VOID;
563                 }
564
565                 /* Walk the linked list of handlers */
566
567                 last_obj_ptr = &obj_desc->region.next;
568                 obj_desc = obj_desc->region.next;
569         }
570
571         /* If we get here, the region was not in the handler's region list */
572
573         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
574                           "Cannot remove region %p from address handler %p\n",
575                           region_obj, handler_obj));
576
577         return_VOID;
578 }
579
580 /*******************************************************************************
581  *
582  * FUNCTION:    acpi_ev_attach_region
583  *
584  * PARAMETERS:  handler_obj         - Handler Object
585  *              region_obj          - Region Object
586  *              acpi_ns_is_locked   - Namespace Region Already Locked?
587  *
588  * RETURN:      None
589  *
590  * DESCRIPTION: Create the association between the handler and the region
591  *              this is a two way association.
592  *
593  ******************************************************************************/
594
595 acpi_status
596 acpi_ev_attach_region(union acpi_operand_object *handler_obj,
597                       union acpi_operand_object *region_obj,
598                       u8 acpi_ns_is_locked)
599 {
600
601         ACPI_FUNCTION_TRACE(ev_attach_region);
602
603         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
604                           "Adding Region [%4.4s] %p to address handler %p [%s]\n",
605                           acpi_ut_get_node_name(region_obj->region.node),
606                           region_obj, handler_obj,
607                           acpi_ut_get_region_name(region_obj->region.
608                                                   space_id)));
609
610         /* Link this region to the front of the handler's list */
611
612         region_obj->region.next = handler_obj->address_space.region_list;
613         handler_obj->address_space.region_list = region_obj;
614
615         /* Install the region's handler */
616
617         if (region_obj->region.handler) {
618                 return_ACPI_STATUS(AE_ALREADY_EXISTS);
619         }
620
621         region_obj->region.handler = handler_obj;
622         acpi_ut_add_reference(handler_obj);
623
624         return_ACPI_STATUS(AE_OK);
625 }
626
627 /*******************************************************************************
628  *
629  * FUNCTION:    acpi_ev_install_handler
630  *
631  * PARAMETERS:  walk_namespace callback
632  *
633  * DESCRIPTION: This routine installs an address handler into objects that are
634  *              of type Region or Device.
635  *
636  *              If the Object is a Device, and the device has a handler of
637  *              the same type then the search is terminated in that branch.
638  *
639  *              This is because the existing handler is closer in proximity
640  *              to any more regions than the one we are trying to install.
641  *
642  ******************************************************************************/
643
644 static acpi_status
645 acpi_ev_install_handler(acpi_handle obj_handle,
646                         u32 level, void *context, void **return_value)
647 {
648         union acpi_operand_object *handler_obj;
649         union acpi_operand_object *next_handler_obj;
650         union acpi_operand_object *obj_desc;
651         struct acpi_namespace_node *node;
652         acpi_status status;
653
654         ACPI_FUNCTION_NAME(ev_install_handler);
655
656         handler_obj = (union acpi_operand_object *)context;
657
658         /* Parameter validation */
659
660         if (!handler_obj) {
661                 return (AE_OK);
662         }
663
664         /* Convert and validate the device handle */
665
666         node = acpi_ns_map_handle_to_node(obj_handle);
667         if (!node) {
668                 return (AE_BAD_PARAMETER);
669         }
670
671         /*
672          * We only care about regions.and objects
673          * that are allowed to have address space handlers
674          */
675         if ((node->type != ACPI_TYPE_DEVICE) &&
676             (node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
677                 return (AE_OK);
678         }
679
680         /* Check for an existing internal object */
681
682         obj_desc = acpi_ns_get_attached_object(node);
683         if (!obj_desc) {
684
685                 /* No object, just exit */
686
687                 return (AE_OK);
688         }
689
690         /* Devices are handled different than regions */
691
692         if (ACPI_GET_OBJECT_TYPE(obj_desc) == ACPI_TYPE_DEVICE) {
693
694                 /* Check if this Device already has a handler for this address space */
695
696                 next_handler_obj = obj_desc->device.handler;
697                 while (next_handler_obj) {
698
699                         /* Found a handler, is it for the same address space? */
700
701                         if (next_handler_obj->address_space.space_id ==
702                             handler_obj->address_space.space_id) {
703                                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
704                                                   "Found handler for region [%s] in device %p(%p) handler %p\n",
705                                                   acpi_ut_get_region_name
706                                                   (handler_obj->address_space.
707                                                    space_id), obj_desc,
708                                                   next_handler_obj,
709                                                   handler_obj));
710
711                                 /*
712                                  * Since the object we found it on was a device, then it
713                                  * means that someone has already installed a handler for
714                                  * the branch of the namespace from this device on.  Just
715                                  * bail out telling the walk routine to not traverse this
716                                  * branch.  This preserves the scoping rule for handlers.
717                                  */
718                                 return (AE_CTRL_DEPTH);
719                         }
720
721                         /* Walk the linked list of handlers attached to this device */
722
723                         next_handler_obj = next_handler_obj->address_space.next;
724                 }
725
726                 /*
727                  * As long as the device didn't have a handler for this
728                  * space we don't care about it.  We just ignore it and
729                  * proceed.
730                  */
731                 return (AE_OK);
732         }
733
734         /* Object is a Region */
735
736         if (obj_desc->region.space_id != handler_obj->address_space.space_id) {
737                 /*
738                  * This region is for a different address space
739                  * -- just ignore it
740                  */
741                 return (AE_OK);
742         }
743
744         /*
745          * Now we have a region and it is for the handler's address
746          * space type.
747          *
748          * First disconnect region for any previous handler (if any)
749          */
750         acpi_ev_detach_region(obj_desc, FALSE);
751
752         /* Connect the region to the new handler */
753
754         status = acpi_ev_attach_region(handler_obj, obj_desc, FALSE);
755         return (status);
756 }
757
758 /*******************************************************************************
759  *
760  * FUNCTION:    acpi_ev_install_space_handler
761  *
762  * PARAMETERS:  Node            - Namespace node for the device
763  *              space_id        - The address space ID
764  *              Handler         - Address of the handler
765  *              Setup           - Address of the setup function
766  *              Context         - Value passed to the handler on each access
767  *
768  * RETURN:      Status
769  *
770  * DESCRIPTION: Install a handler for all op_regions of a given space_id.
771  *              Assumes namespace is locked
772  *
773  ******************************************************************************/
774
775 acpi_status
776 acpi_ev_install_space_handler(struct acpi_namespace_node * node,
777                               acpi_adr_space_type space_id,
778                               acpi_adr_space_handler handler,
779                               acpi_adr_space_setup setup, void *context)
780 {
781         union acpi_operand_object *obj_desc;
782         union acpi_operand_object *handler_obj;
783         acpi_status status;
784         acpi_object_type type;
785         u8 flags = 0;
786
787         ACPI_FUNCTION_TRACE(ev_install_space_handler);
788
789         /*
790          * This registration is valid for only the types below
791          * and the root.  This is where the default handlers
792          * get placed.
793          */
794         if ((node->type != ACPI_TYPE_DEVICE) &&
795             (node->type != ACPI_TYPE_PROCESSOR) &&
796             (node->type != ACPI_TYPE_THERMAL) && (node != acpi_gbl_root_node)) {
797                 status = AE_BAD_PARAMETER;
798                 goto unlock_and_exit;
799         }
800
801         if (handler == ACPI_DEFAULT_HANDLER) {
802                 flags = ACPI_ADDR_HANDLER_DEFAULT_INSTALLED;
803
804                 switch (space_id) {
805                 case ACPI_ADR_SPACE_SYSTEM_MEMORY:
806                         handler = acpi_ex_system_memory_space_handler;
807                         setup = acpi_ev_system_memory_region_setup;
808                         break;
809
810                 case ACPI_ADR_SPACE_SYSTEM_IO:
811                         handler = acpi_ex_system_io_space_handler;
812                         setup = acpi_ev_io_space_region_setup;
813                         break;
814
815                 case ACPI_ADR_SPACE_PCI_CONFIG:
816                         handler = acpi_ex_pci_config_space_handler;
817                         setup = acpi_ev_pci_config_region_setup;
818                         break;
819
820                 case ACPI_ADR_SPACE_CMOS:
821                         handler = acpi_ex_cmos_space_handler;
822                         setup = acpi_ev_cmos_region_setup;
823                         break;
824
825                 case ACPI_ADR_SPACE_PCI_BAR_TARGET:
826                         handler = acpi_ex_pci_bar_space_handler;
827                         setup = acpi_ev_pci_bar_region_setup;
828                         break;
829
830                 case ACPI_ADR_SPACE_DATA_TABLE:
831                         handler = acpi_ex_data_table_space_handler;
832                         setup = NULL;
833                         break;
834
835                 default:
836                         status = AE_BAD_PARAMETER;
837                         goto unlock_and_exit;
838                 }
839         }
840
841         /* If the caller hasn't specified a setup routine, use the default */
842
843         if (!setup) {
844                 setup = acpi_ev_default_region_setup;
845         }
846
847         /* Check for an existing internal object */
848
849         obj_desc = acpi_ns_get_attached_object(node);
850         if (obj_desc) {
851                 /*
852                  * The attached device object already exists.
853                  * Make sure the handler is not already installed.
854                  */
855                 handler_obj = obj_desc->device.handler;
856
857                 /* Walk the handler list for this device */
858
859                 while (handler_obj) {
860
861                         /* Same space_id indicates a handler already installed */
862
863                         if (handler_obj->address_space.space_id == space_id) {
864                                 if (handler_obj->address_space.handler ==
865                                     handler) {
866                                         /*
867                                          * It is (relatively) OK to attempt to install the SAME
868                                          * handler twice. This can easily happen
869                                          * with PCI_Config space.
870                                          */
871                                         status = AE_SAME_HANDLER;
872                                         goto unlock_and_exit;
873                                 } else {
874                                         /* A handler is already installed */
875
876                                         status = AE_ALREADY_EXISTS;
877                                 }
878                                 goto unlock_and_exit;
879                         }
880
881                         /* Walk the linked list of handlers */
882
883                         handler_obj = handler_obj->address_space.next;
884                 }
885         } else {
886                 ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
887                                   "Creating object on Device %p while installing handler\n",
888                                   node));
889
890                 /* obj_desc does not exist, create one */
891
892                 if (node->type == ACPI_TYPE_ANY) {
893                         type = ACPI_TYPE_DEVICE;
894                 } else {
895                         type = node->type;
896                 }
897
898                 obj_desc = acpi_ut_create_internal_object(type);
899                 if (!obj_desc) {
900                         status = AE_NO_MEMORY;
901                         goto unlock_and_exit;
902                 }
903
904                 /* Init new descriptor */
905
906                 obj_desc->common.type = (u8) type;
907
908                 /* Attach the new object to the Node */
909
910                 status = acpi_ns_attach_object(node, obj_desc, type);
911
912                 /* Remove local reference to the object */
913
914                 acpi_ut_remove_reference(obj_desc);
915
916                 if (ACPI_FAILURE(status)) {
917                         goto unlock_and_exit;
918                 }
919         }
920
921         ACPI_DEBUG_PRINT((ACPI_DB_OPREGION,
922                           "Installing address handler for region %s(%X) on Device %4.4s %p(%p)\n",
923                           acpi_ut_get_region_name(space_id), space_id,
924                           acpi_ut_get_node_name(node), node, obj_desc));
925
926         /*
927          * Install the handler
928          *
929          * At this point there is no existing handler.
930          * Just allocate the object for the handler and link it
931          * into the list.
932          */
933         handler_obj =
934             acpi_ut_create_internal_object(ACPI_TYPE_LOCAL_ADDRESS_HANDLER);
935         if (!handler_obj) {
936                 status = AE_NO_MEMORY;
937                 goto unlock_and_exit;
938         }
939
940         /* Init handler obj */
941
942         handler_obj->address_space.space_id = (u8) space_id;
943         handler_obj->address_space.handler_flags = flags;
944         handler_obj->address_space.region_list = NULL;
945         handler_obj->address_space.node = node;
946         handler_obj->address_space.handler = handler;
947         handler_obj->address_space.context = context;
948         handler_obj->address_space.setup = setup;
949
950         /* Install at head of Device.address_space list */
951
952         handler_obj->address_space.next = obj_desc->device.handler;
953
954         /*
955          * The Device object is the first reference on the handler_obj.
956          * Each region that uses the handler adds a reference.
957          */
958         obj_desc->device.handler = handler_obj;
959
960         /*
961          * Walk the namespace finding all of the regions this
962          * handler will manage.
963          *
964          * Start at the device and search the branch toward
965          * the leaf nodes until either the leaf is encountered or
966          * a device is detected that has an address handler of the
967          * same type.
968          *
969          * In either case, back up and search down the remainder
970          * of the branch
971          */
972         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
973                                         ACPI_NS_WALK_UNLOCK,
974                                         acpi_ev_install_handler, handler_obj,
975                                         NULL);
976
977       unlock_and_exit:
978         return_ACPI_STATUS(status);
979 }
980
981 /*******************************************************************************
982  *
983  * FUNCTION:    acpi_ev_execute_reg_methods
984  *
985  * PARAMETERS:  Node            - Namespace node for the device
986  *              space_id        - The address space ID
987  *
988  * RETURN:      Status
989  *
990  * DESCRIPTION: Run all _REG methods for the input Space ID;
991  *              Note: assumes namespace is locked, or system init time.
992  *
993  ******************************************************************************/
994
995 acpi_status
996 acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
997                             acpi_adr_space_type space_id)
998 {
999         acpi_status status;
1000
1001         ACPI_FUNCTION_TRACE(ev_execute_reg_methods);
1002
1003         /*
1004          * Run all _REG methods for all Operation Regions for this
1005          * space ID.  This is a separate walk in order to handle any
1006          * interdependencies between regions and _REG methods.  (i.e. handlers
1007          * must be installed for all regions of this Space ID before we
1008          * can run any _REG methods)
1009          */
1010         status = acpi_ns_walk_namespace(ACPI_TYPE_ANY, node, ACPI_UINT32_MAX,
1011                                         ACPI_NS_WALK_UNLOCK, acpi_ev_reg_run,
1012                                         &space_id, NULL);
1013
1014         return_ACPI_STATUS(status);
1015 }
1016
1017 /*******************************************************************************
1018  *
1019  * FUNCTION:    acpi_ev_reg_run
1020  *
1021  * PARAMETERS:  walk_namespace callback
1022  *
1023  * DESCRIPTION: Run _REG method for region objects of the requested space_iD
1024  *
1025  ******************************************************************************/
1026
1027 static acpi_status
1028 acpi_ev_reg_run(acpi_handle obj_handle,
1029                 u32 level, void *context, void **return_value)
1030 {
1031         union acpi_operand_object *obj_desc;
1032         struct acpi_namespace_node *node;
1033         acpi_adr_space_type space_id;
1034         acpi_status status;
1035
1036         space_id = *ACPI_CAST_PTR(acpi_adr_space_type, context);
1037
1038         /* Convert and validate the device handle */
1039
1040         node = acpi_ns_map_handle_to_node(obj_handle);
1041         if (!node) {
1042                 return (AE_BAD_PARAMETER);
1043         }
1044
1045         /*
1046          * We only care about regions.and objects
1047          * that are allowed to have address space handlers
1048          */
1049         if ((node->type != ACPI_TYPE_REGION) && (node != acpi_gbl_root_node)) {
1050                 return (AE_OK);
1051         }
1052
1053         /* Check for an existing internal object */
1054
1055         obj_desc = acpi_ns_get_attached_object(node);
1056         if (!obj_desc) {
1057
1058                 /* No object, just exit */
1059
1060                 return (AE_OK);
1061         }
1062
1063         /* Object is a Region */
1064
1065         if (obj_desc->region.space_id != space_id) {
1066                 /*
1067                  * This region is for a different address space
1068                  * -- just ignore it
1069                  */
1070                 return (AE_OK);
1071         }
1072
1073         status = acpi_ev_execute_reg_method(obj_desc, 1);
1074         return (status);
1075 }