3 * (c) 1999 by Computone Corporation
5 ********************************************************************************
7 * PACKAGE: Linux tty Device Driver for IntelliPort family of multiport
8 * serial I/O controllers.
10 * DESCRIPTION: Mainline code for the device driver
12 *******************************************************************************/
15 // Fix the immediate DSS_NOW problem.
16 // Work over the channel stats return logic in ip2_ipl_ioctl so they
17 // make sense for all 256 possible channels and so the user space
18 // utilities will compile and work properly.
22 // 1.2.14 /\/\|=mhw=|\/\/
23 // Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts.
24 // Changed the definition of ip2trace to be more consistent with kernel style
25 // Thanks to Andreas Dilger <adilger@turbolabs.com> for these updates
27 // 1.2.13 /\/\|=mhw=|\/\/
28 // DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform
29 // to agreed devfs serial device naming convention.
31 // 1.2.12 /\/\|=mhw=|\/\/
32 // Cleaned up some remove queue cut and paste errors
34 // 1.2.11 /\/\|=mhw=|\/\/
35 // Clean up potential NULL pointer dereferences
36 // Clean up devfs registration
37 // Add kernel command line parsing for io and irq
38 // Compile defaults for io and irq are now set in ip2.c not ip2.h!
39 // Reworked poll_only hack for explicit parameter setting
40 // You must now EXPLICITLY set poll_only = 1 or set all irqs to 0
41 // Merged ip2_loadmain and old_ip2_init
42 // Converted all instances of interruptible_sleep_on into queue calls
43 // Most of these had no race conditions but better to clean up now
45 // 1.2.10 /\/\|=mhw=|\/\/
46 // Fixed the bottom half interrupt handler and enabled USE_IQI
47 // to split the interrupt handler into a formal top-half / bottom-half
48 // Fixed timing window on high speed processors that queued messages to
49 // the outbound mail fifo faster than the board could handle.
52 // Four box EX was barfing on >128k kmalloc, made structure smaller by
53 // reducing output buffer size
56 // Device file system support (MHW)
60 // Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules
64 // DCD was not reported when CLOCAL was set on call to TIOCMGET
67 // TIOCMGET requests and waits for status return
68 // No DSS interrupts enabled except for DCD when needed
70 // For internal use only
72 //#define IP2DEBUG_INIT
73 //#define IP2DEBUG_OPEN
74 //#define IP2DEBUG_WRITE
75 //#define IP2DEBUG_READ
76 //#define IP2DEBUG_IOCTL
77 //#define IP2DEBUG_IPL
79 //#define IP2DEBUG_TRACE
86 #include <linux/ctype.h>
87 #include <linux/string.h>
88 #include <linux/fcntl.h>
89 #include <linux/errno.h>
90 #include <linux/module.h>
91 #include <linux/signal.h>
92 #include <linux/sched.h>
93 #include <linux/timer.h>
94 #include <linux/interrupt.h>
95 #include <linux/pci.h>
97 #include <linux/slab.h>
98 #include <linux/major.h>
99 #include <linux/wait.h>
100 #include <linux/device.h>
102 #include <linux/tty.h>
103 #include <linux/tty_flip.h>
104 #include <linux/termios.h>
105 #include <linux/tty_driver.h>
106 #include <linux/serial.h>
107 #include <linux/ptrace.h>
108 #include <linux/ioport.h>
110 #include <linux/cdk.h>
111 #include <linux/comstats.h>
112 #include <linux/delay.h>
113 #include <linux/bitops.h>
115 #include <asm/system.h>
119 #include <linux/vmalloc.h>
120 #include <linux/init.h>
122 #include <asm/uaccess.h>
124 #include "ip2types.h"
125 #include "ip2trace.h"
126 #include "ip2ioctl.h"
135 #include <linux/proc_fs.h>
137 static int ip2_read_procmem(char *, char **, off_t, int);
138 static int ip2_read_proc(char *, char **, off_t, int, int *, void * );
140 /********************/
141 /* Type Definitions */
142 /********************/
148 /* String constants to identify ourselves */
149 static char *pcName = "Computone IntelliPort Plus multiport driver";
150 static char *pcVersion = "1.2.14";
152 /* String constants for port names */
153 static char *pcDriver_name = "ip2";
154 static char *pcIpl = "ip2ipl";
156 /* Serial subtype definitions */
157 #define SERIAL_TYPE_NORMAL 1
159 // cheezy kludge or genius - you decide?
160 int ip2_loadmain(int *, int *, unsigned char *, int);
161 static unsigned char *Fip_firmware;
162 static int Fip_firmware_size;
164 /***********************/
165 /* Function Prototypes */
166 /***********************/
168 /* Global module entry functions */
170 /* Private (static) functions */
171 static int ip2_open(PTTY, struct file *);
172 static void ip2_close(PTTY, struct file *);
173 static int ip2_write(PTTY, const unsigned char *, int);
174 static void ip2_putchar(PTTY, unsigned char);
175 static void ip2_flush_chars(PTTY);
176 static int ip2_write_room(PTTY);
177 static int ip2_chars_in_buf(PTTY);
178 static void ip2_flush_buffer(PTTY);
179 static int ip2_ioctl(PTTY, struct file *, UINT, ULONG);
180 static void ip2_set_termios(PTTY, struct ktermios *);
181 static void ip2_set_line_discipline(PTTY);
182 static void ip2_throttle(PTTY);
183 static void ip2_unthrottle(PTTY);
184 static void ip2_stop(PTTY);
185 static void ip2_start(PTTY);
186 static void ip2_hangup(PTTY);
187 static int ip2_tiocmget(struct tty_struct *tty, struct file *file);
188 static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
189 unsigned int set, unsigned int clear);
191 static void set_irq(int, int);
192 static void ip2_interrupt_bh(struct work_struct *work);
193 static irqreturn_t ip2_interrupt(int irq, void *dev_id);
194 static void ip2_poll(unsigned long arg);
195 static inline void service_all_boards(void);
196 static void do_input(struct work_struct *);
197 static void do_status(struct work_struct *);
199 static void ip2_wait_until_sent(PTTY,int);
201 static void set_params (i2ChanStrPtr, struct ktermios *);
202 static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *);
203 static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *);
205 static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *);
206 static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *);
207 static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG);
208 static int ip2_ipl_open(struct inode *, struct file *);
210 static int DumpTraceBuffer(char __user *, int);
211 static int DumpFifoBuffer( char __user *, int);
213 static void ip2_init_board(int);
214 static unsigned short find_eisa_board(int);
220 static struct tty_driver *ip2_tty_driver;
222 /* Here, then is a table of board pointers which the interrupt routine should
223 * scan through to determine who it must service.
225 static unsigned short i2nBoards; // Number of boards here
227 static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS];
229 static i2ChanStrPtr DevTable[IP2_MAX_PORTS];
230 //DevTableMem just used to save addresses for kfree
231 static void *DevTableMem[IP2_MAX_BOARDS];
233 /* This is the driver descriptor for the ip2ipl device, which is used to
234 * download the loadware to the boards.
236 static const struct file_operations ip2_ipl = {
237 .owner = THIS_MODULE,
238 .read = ip2_ipl_read,
239 .write = ip2_ipl_write,
240 .ioctl = ip2_ipl_ioctl,
241 .open = ip2_ipl_open,
244 static unsigned long irq_counter = 0;
245 static unsigned long bh_counter = 0;
247 // Use immediate queue to service interrupts
249 //#define USE_IQ // PCI&2.2 needs work
251 /* The timer_list entry for our poll routine. If interrupt operation is not
252 * selected, the board is serviced periodically to see if anything needs doing.
254 #define POLL_TIMEOUT (jiffies + 1)
255 static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0);
258 #ifdef IP2DEBUG_TRACE
259 /* Trace (debug) buffer data */
260 #define TRACEMAX 1000
261 static unsigned long tracebuf[TRACEMAX];
262 static int tracestuff;
263 static int tracestrip;
264 static int tracewrap;
271 #if defined(MODULE) && defined(IP2DEBUG_OPEN)
272 #define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \
273 tty->name,(pCh->flags),ip2_tty_driver->refcount, \
274 tty->count,/*GET_USE_COUNT(module)*/0,s)
283 #include "i2ellis.c" /* Extremely low-level interface services */
284 #include "i2cmd.c" /* Standard loadware command definitions */
285 #include "i2lib.c" /* High level interface services */
287 /* Configuration area for modprobe */
289 MODULE_AUTHOR("Doug McNash");
290 MODULE_DESCRIPTION("Computone IntelliPort Plus Driver");
292 static int poll_only = 0;
295 static int Eisa_slot;
298 static char rirqs[IP2_MAX_BOARDS];
299 static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0};
301 /* for sysfs class support */
302 static struct class *ip2_class;
304 // Some functions to keep track of what irq's we have
307 is_valid_irq(int irq)
311 while ((*i != 0) && (*i != irq)) {
318 mark_requested_irq( char irq )
320 rirqs[iindx++] = irq;
325 clear_requested_irq( char irq )
328 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
329 if (rirqs[i] == irq) {
339 have_requested_irq( char irq )
341 // array init to zeros so 0 irq will not be requested as a side effect
343 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
350 /******************************************************************************/
351 /* Function: init_module() */
352 /* Parameters: None */
353 /* Returns: Success (0) */
356 /* This is a required entry point for an installable module. It simply calls */
357 /* the driver initialisation function and returns what it returns. */
358 /******************************************************************************/
364 printk (KERN_DEBUG "Loading module ...\n" );
370 /******************************************************************************/
371 /* Function: cleanup_module() */
372 /* Parameters: None */
373 /* Returns: Nothing */
376 /* This is a required entry point for an installable module. It has to return */
377 /* the device and the driver to a passive state. It should not be necessary */
378 /* to reset the board fully, especially as the loadware is downloaded */
379 /* externally rather than in the driver. We just want to disable the board */
380 /* and clear the loadware to a reset state. To allow this there has to be a */
381 /* way to detect whether the board has the loadware running at init time to */
382 /* handle subsequent installations of the driver. All memory allocated by the */
383 /* driver should be returned since it may be unloaded from memory. */
384 /******************************************************************************/
393 printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion );
395 /* Stop poll timer if we had one. */
397 del_timer ( &PollTimer );
401 /* Reset the boards we have. */
402 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
403 if ( i2BoardPtrTable[i] ) {
404 iiReset( i2BoardPtrTable[i] );
408 /* The following is done at most once, if any boards were installed. */
409 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
410 if ( i2BoardPtrTable[i] ) {
411 iiResetDelay( i2BoardPtrTable[i] );
412 /* free io addresses and Tibet */
413 release_region( ip2config.addr[i], 8 );
414 device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i));
415 device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1));
417 /* Disable and remove interrupt handler. */
418 if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) {
419 free_irq ( ip2config.irq[i], (void *)&pcName);
420 clear_requested_irq( ip2config.irq[i]);
423 class_destroy(ip2_class);
424 if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) {
425 printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err);
427 put_tty_driver(ip2_tty_driver);
428 unregister_chrdev(IP2_IPL_MAJOR, pcIpl);
429 remove_proc_entry("ip2mem", &proc_root);
432 for (i = 0; i < IP2_MAX_BOARDS; i++) {
435 if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) {
436 pci_disable_device(ip2config.pci_dev[i]);
437 pci_dev_put(ip2config.pci_dev[i]);
438 ip2config.pci_dev[i] = NULL;
441 if ((pB = i2BoardPtrTable[i]) != 0 ) {
443 i2BoardPtrTable[i] = NULL;
445 if ((DevTableMem[i]) != NULL ) {
446 kfree ( DevTableMem[i] );
447 DevTableMem[i] = NULL;
451 /* Cleanup the iiEllis subsystem. */
454 printk (KERN_DEBUG "IP2 Unloaded\n" );
459 static const struct tty_operations ip2_ops = {
463 .put_char = ip2_putchar,
464 .flush_chars = ip2_flush_chars,
465 .write_room = ip2_write_room,
466 .chars_in_buffer = ip2_chars_in_buf,
467 .flush_buffer = ip2_flush_buffer,
469 .throttle = ip2_throttle,
470 .unthrottle = ip2_unthrottle,
471 .set_termios = ip2_set_termios,
472 .set_ldisc = ip2_set_line_discipline,
475 .hangup = ip2_hangup,
476 .read_proc = ip2_read_proc,
477 .tiocmget = ip2_tiocmget,
478 .tiocmset = ip2_tiocmset,
481 /******************************************************************************/
482 /* Function: ip2_loadmain() */
483 /* Parameters: irq, io from command line of insmod et. al. */
484 /* pointer to fip firmware and firmware size for boards */
485 /* Returns: Success (0) */
488 /* This was the required entry point for all drivers (now in ip2.c) */
489 /* It performs all */
490 /* initialisation of the devices and driver structures, and registers itself */
491 /* with the relevant kernel modules. */
492 /******************************************************************************/
493 /* IRQF_DISABLED - if set blocks all interrupts else only this line */
494 /* IRQF_SHARED - for shared irq PCI or maybe EISA only */
495 /* SA_RANDOM - can be source for cert. random number generators */
496 #define IP2_SA_FLAGS 0
499 ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize)
504 i2eBordStrPtr pB = NULL;
506 static struct pci_dev *pci_dev_i = NULL;
508 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 );
510 /* process command line arguments to modprobe or
511 insmod i.e. iop & irqp */
512 /* irqp and iop should ALWAYS be specified now... But we check
513 them individually just to be sure, anyways... */
514 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
516 ip2config.addr[i] = iop[i];
519 ip2config.irq[i] = irqp[i];
521 ip2config.irq[i] = 0;
523 // This is a little bit of a hack. If poll_only=1 on command
524 // line back in ip2.c OR all IRQs on all specified boards are
525 // explicitly set to 0, then drop to poll only mode and override
526 // PCI or EISA interrupts. This superceeds the old hack of
527 // triggering if all interrupts were zero (like da default).
528 // Still a hack but less prone to random acts of terrorism.
530 // What we really should do, now that the IRQ default is set
531 // to -1, is to use 0 as a hard coded, do not probe.
534 poll_only |= irqp[i];
538 poll_only = !poll_only;
540 Fip_firmware = firmware;
541 Fip_firmware_size = firmsize;
543 /* Announce our presence */
544 printk( KERN_INFO "%s version %s\n", pcName, pcVersion );
546 // ip2 can be unloaded and reloaded for no good reason
547 // we can't let that happen here or bad things happen
548 // second load hoses board but not system - fixme later
550 printk( KERN_INFO "Still loaded\n" );
555 ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS);
559 /* Initialise the iiEllis subsystem. */
562 /* Initialize arrays. */
563 memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable );
564 memset( DevTable, 0, sizeof DevTable );
566 /* Initialise all the boards we can find (up to the maximum). */
567 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
568 switch ( ip2config.addr[i] ) {
569 case 0: /* skip this slot even if card is present */
572 /* ISA address must be specified */
573 if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) {
574 printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n",
575 i, ip2config.addr[i] );
576 ip2config.addr[i] = 0;
578 ip2config.type[i] = ISA;
580 /* Check for valid irq argument, set for polling if invalid */
581 if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) {
582 printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]);
583 ip2config.irq[i] = 0;// 0 is polling and is valid in that sense
592 pci_dev_i = pci_get_device(PCI_VENDOR_ID_COMPUTONE,
593 PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i);
594 if (pci_dev_i != NULL) {
597 if (pci_enable_device(pci_dev_i)) {
598 printk( KERN_ERR "IP2: can't enable PCI device at %s\n",
599 pci_name(pci_dev_i));
602 ip2config.type[i] = PCI;
603 ip2config.pci_dev[i] = pci_dev_get(pci_dev_i);
605 pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr);
607 ip2config.addr[i]=(USHORT)(addr&0xfffe);
609 printk( KERN_ERR "IP2: PCI I/O address error\n");
612 // If the PCI BIOS assigned it, lets try and use it. If we
613 // can't acquire it or it screws up, deal with it then.
615 // if (!is_valid_irq(pci_irq)) {
616 // printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq);
619 ip2config.irq[i] = pci_dev_i->irq;
620 } else { // ann error
621 ip2config.addr[i] = 0;
622 printk(KERN_ERR "IP2: PCI board %d not found\n", i);
626 printk( KERN_ERR "IP2: PCI card specified but PCI support not\n");
627 printk( KERN_ERR "IP2: configured in this kernel.\n");
628 printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n");
629 #endif /* CONFIG_PCI */
632 if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) {
633 /* Eisa_irq set as side effect, boo */
634 ip2config.type[i] = EISA;
636 ip2config.irq[i] = Eisa_irq;
641 pci_dev_put(pci_dev_i);
643 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
644 if ( ip2config.addr[i] ) {
645 pB = kzalloc(sizeof(i2eBordStr), GFP_KERNEL);
647 i2BoardPtrTable[i] = pB;
648 iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer );
651 printk(KERN_ERR "IP2: board memory allocation error\n");
655 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
656 if ( ( pB = i2BoardPtrTable[i] ) != NULL ) {
661 for ( i = 0; i < IP2_MAX_BOARDS; ++i ) {
662 if ( i2BoardPtrTable[i] != NULL ) {
667 ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 );
669 ip2_tty_driver->owner = THIS_MODULE;
670 ip2_tty_driver->name = "ttyF";
671 ip2_tty_driver->driver_name = pcDriver_name;
672 ip2_tty_driver->major = IP2_TTY_MAJOR;
673 ip2_tty_driver->minor_start = 0;
674 ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
675 ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL;
676 ip2_tty_driver->init_termios = tty_std_termios;
677 ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL;
678 ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
679 tty_set_operations(ip2_tty_driver, &ip2_ops);
681 ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 );
683 /* Register the tty devices. */
684 if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) {
685 printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err);
686 put_tty_driver(ip2_tty_driver);
689 /* Register the IPL driver. */
690 if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) {
691 printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err );
693 /* create the sysfs class */
694 ip2_class = class_create(THIS_MODULE, "ip2");
695 if (IS_ERR(ip2_class)) {
696 err = PTR_ERR(ip2_class);
700 /* Register the read_procmem thing */
701 if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) {
702 printk(KERN_ERR "IP2: failed to register read_procmem\n");
705 ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 );
706 /* Register the interrupt handler or poll handler, depending upon the
707 * specified interrupt.
710 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
711 if ( 0 == ip2config.addr[i] ) {
715 if ( NULL != ( pB = i2BoardPtrTable[i] ) ) {
716 device_create(ip2_class, NULL,
717 MKDEV(IP2_IPL_MAJOR, 4 * i),
719 device_create(ip2_class, NULL,
720 MKDEV(IP2_IPL_MAJOR, 4 * i + 1),
723 for ( box = 0; box < ABS_MAX_BOXES; ++box )
725 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
727 if ( pB->i2eChannelMap[box] & (1 << j) )
729 tty_register_device(ip2_tty_driver,
730 j + ABS_BIGGEST_BOX *
731 (box+i*ABS_MAX_BOXES), NULL);
738 // Poll only forces driver to only use polling and
739 // to ignore the probed PCI or EISA interrupts.
740 ip2config.irq[i] = CIR_POLL;
742 if ( ip2config.irq[i] == CIR_POLL ) {
745 PollTimer.expires = POLL_TIMEOUT;
746 add_timer ( &PollTimer );
748 printk( KERN_INFO "IP2: polling\n");
751 if (have_requested_irq(ip2config.irq[i]))
753 rc = request_irq( ip2config.irq[i], ip2_interrupt,
754 IP2_SA_FLAGS | (ip2config.type[i] == PCI ? IRQF_SHARED : 0),
755 pcName, (void *)&pcName);
757 printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc);
758 ip2config.irq[i] = CIR_POLL;
759 printk( KERN_INFO "IP2: Polling %ld/sec.\n",
760 (POLL_TIMEOUT - jiffies));
763 mark_requested_irq(ip2config.irq[i]);
764 /* Initialise the interrupt handler bottom half (aka slih). */
767 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
768 if ( i2BoardPtrTable[i] ) {
769 set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */
773 ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 );
777 unregister_chrdev(IP2_IPL_MAJOR, "ip2");
782 EXPORT_SYMBOL(ip2_loadmain);
784 /******************************************************************************/
785 /* Function: ip2_init_board() */
786 /* Parameters: Index of board in configuration structure */
787 /* Returns: Success (0) */
790 /* This function initializes the specified board. The loadware is copied to */
791 /* the board, the channel structures are initialized, and the board details */
792 /* are reported on the console. */
793 /******************************************************************************/
795 ip2_init_board( int boardnum )
798 int nports = 0, nboxes = 0;
800 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
802 if ( !iiInitialize ( pB ) ) {
803 printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n",
804 pB->i2eBase, pB->i2eError );
807 printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1,
808 ip2config.addr[boardnum], ip2config.irq[boardnum] );
810 if (!request_region( ip2config.addr[boardnum], 8, pcName )) {
811 printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]);
815 if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size )
817 printk ( KERN_ERR "IP2: failed to download loadware\n" );
818 goto err_release_region;
820 printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n",
821 pB->i2ePom.e.porVersion,
822 pB->i2ePom.e.porRevision,
823 pB->i2ePom.e.porSubRev, pB->i2eLVersion,
824 pB->i2eLRevision, pB->i2eLSub );
827 switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) {
830 printk( KERN_ERR "IP2: Unknown board type, ID = %x\n",
831 pB->i2ePom.e.porID );
833 goto err_release_region;
836 case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */
837 printk ( KERN_INFO "IP2: ISA-4\n" );
841 case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */
842 printk ( KERN_INFO "IP2: ISA-8 std\n" );
846 case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */
847 printk ( KERN_INFO "IP2: ISA-8 RJ11\n" );
851 case POR_ID_FIIEX: /* IntelliPort IIEX */
853 int portnum = IP2_PORTS_PER_BOARD * boardnum;
856 for( box = 0; box < ABS_MAX_BOXES; ++box ) {
857 if ( pB->i2eChannelMap[box] != 0 ) {
860 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
861 if ( pB->i2eChannelMap[box] & 1<< i ) {
866 DevTableMem[boardnum] = pCh =
867 kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL );
869 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
870 goto err_release_region;
872 if ( !i2InitChannels( pB, nports, pCh ) ) {
873 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
875 goto err_release_region;
877 pB->i2eChannelPtr = &DevTable[portnum];
878 pB->i2eChannelCnt = ABS_MOST_PORTS;
880 for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) {
881 for( i = 0; i < ABS_BIGGEST_BOX; ++i ) {
882 if ( pB->i2eChannelMap[box] & (1 << i) ) {
883 DevTable[portnum + i] = pCh;
884 pCh->port_index = portnum + i;
889 printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n",
890 nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 );
894 DevTableMem[boardnum] = pCh =
895 kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL );
897 printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n");
898 goto err_release_region;
900 pB->i2eChannelPtr = pCh;
901 pB->i2eChannelCnt = nports;
902 if ( !i2InitChannels( pB, nports, pCh ) ) {
903 printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError);
905 goto err_release_region;
907 pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum];
909 for( i = 0; i < pB->i2eChannelCnt; ++i ) {
910 DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh;
911 pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i;
915 INIT_WORK(&pB->tqueue_interrupt, ip2_interrupt_bh);
919 release_region(ip2config.addr[boardnum], 8);
922 i2BoardPtrTable[boardnum] = NULL;
926 /******************************************************************************/
927 /* Function: find_eisa_board ( int start_slot ) */
928 /* Parameters: First slot to check */
929 /* Returns: Address of EISA IntelliPort II controller */
932 /* This function searches for an EISA IntelliPort controller, starting */
933 /* from the specified slot number. If the motherboard is not identified as an */
934 /* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */
935 /* it returns the base address of the controller. */
936 /******************************************************************************/
937 static unsigned short
938 find_eisa_board( int start_slot )
941 unsigned int idm = 0;
942 unsigned int idp = 0;
943 unsigned int base = 0;
950 * First a check for an EISA motherboard, which we do by comparing the
951 * EISA ID registers for the system board and the first couple of slots.
952 * No slot ID should match the system board ID, but on an ISA or PCI
953 * machine the odds are that an empty bus will return similar values for
957 value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3);
958 for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) {
959 j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3);
965 * OK, so we are inclined to believe that this is an EISA machine. Find
966 * an IntelliPort controller.
968 for( i = start_slot; i < 16; i++ ) {
970 idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff);
971 idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff);
973 if ( idm == 0x0e8e ) {
974 if ( idp == 0x0281 || idp == 0x0218 ) {
976 } else if ( idp == 0x0282 || idp == 0x0283 ) {
977 ismine = 3; /* Can do edge-trigger */
988 /* It's some sort of EISA card, but at what address is it configured? */
990 setup_address = base + 0xc88;
991 value = inb(base + 0xc86);
992 setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0;
994 if ( (ismine & 2) && !(value & 0x10) ) {
995 ismine = 1; /* Could be edging, but not */
998 if ( Eisa_irq == 0 ) {
999 Eisa_irq = setup_irq;
1000 } else if ( Eisa_irq != setup_irq ) {
1001 printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" );
1004 #ifdef IP2DEBUG_INIT
1005 printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x",
1006 base >> 12, idm, idp, setup_address);
1008 printk(KERN_DEBUG ", Interrupt %d %s\n",
1009 setup_irq, (ismine & 2) ? "(edge)" : "(level)");
1011 printk(KERN_DEBUG ", (polled)\n");
1014 return setup_address;
1017 /******************************************************************************/
1018 /* Function: set_irq() */
1019 /* Parameters: index to board in board table */
1021 /* Returns: Success (0) */
1024 /******************************************************************************/
1026 set_irq( int boardnum, int boardIrq )
1028 unsigned char tempCommand[16];
1029 i2eBordStrPtr pB = i2BoardPtrTable[boardnum];
1030 unsigned long flags;
1033 * Notify the boards they may generate interrupts. This is done by
1034 * sending an in-line command to channel 0 on each board. This is why
1035 * the channels have to be defined already. For each board, if the
1036 * interrupt has never been defined, we must do so NOW, directly, since
1037 * board will not send flow control or even give an interrupt until this
1038 * is done. If polling we must send 0 as the interrupt parameter.
1041 // We will get an interrupt here at the end of this function
1043 iiDisableMailIrq(pB);
1045 /* We build up the entire packet header. */
1046 CHANNEL_OF(tempCommand) = 0;
1047 PTYPE_OF(tempCommand) = PTYPE_INLINE;
1048 CMD_COUNT_OF(tempCommand) = 2;
1049 (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ;
1050 (CMD_OF(tempCommand))[1] = boardIrq;
1052 * Write to FIFO; don't bother to adjust fifo capacity for this, since
1053 * board will respond almost immediately after SendMail hit.
1055 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1056 iiWriteBuf(pB, tempCommand, 4);
1057 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1058 pB->i2eUsingIrq = boardIrq;
1059 pB->i2eOutMailWaiting |= MB_OUT_STUFFED;
1061 /* Need to update number of boards before you enable mailbox int */
1064 CHANNEL_OF(tempCommand) = 0;
1065 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1066 CMD_COUNT_OF(tempCommand) = 6;
1067 (CMD_OF(tempCommand))[0] = 88; // SILO
1068 (CMD_OF(tempCommand))[1] = 64; // chars
1069 (CMD_OF(tempCommand))[2] = 32; // ms
1071 (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK
1072 (CMD_OF(tempCommand))[4] = 64; // chars
1074 (CMD_OF(tempCommand))[5] = 87; // HW_TEST
1075 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1076 iiWriteBuf(pB, tempCommand, 8);
1077 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1079 CHANNEL_OF(tempCommand) = 0;
1080 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1081 CMD_COUNT_OF(tempCommand) = 1;
1082 (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */
1083 iiWriteBuf(pB, tempCommand, 3);
1086 // enable heartbeat for test porpoises
1087 CHANNEL_OF(tempCommand) = 0;
1088 PTYPE_OF(tempCommand) = PTYPE_BYPASS;
1089 CMD_COUNT_OF(tempCommand) = 2;
1090 (CMD_OF(tempCommand))[0] = 44; /* get ping */
1091 (CMD_OF(tempCommand))[1] = 200; /* 200 ms */
1092 WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags);
1093 iiWriteBuf(pB, tempCommand, 4);
1094 WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags);
1097 iiEnableMailIrq(pB);
1098 iiSendPendingMail(pB);
1101 /******************************************************************************/
1102 /* Interrupt Handler Section */
1103 /******************************************************************************/
1106 service_all_boards(void)
1111 /* Service every board on the list */
1112 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
1113 pB = i2BoardPtrTable[i];
1115 i2ServiceBoard( pB );
1121 /******************************************************************************/
1122 /* Function: ip2_interrupt_bh(work) */
1123 /* Parameters: work - pointer to the board structure */
1124 /* Returns: Nothing */
1127 /* Service the board in a bottom half interrupt handler and then */
1128 /* reenable the board's interrupts if it has an IRQ number */
1130 /******************************************************************************/
1132 ip2_interrupt_bh(struct work_struct *work)
1134 i2eBordStrPtr pB = container_of(work, i2eBordStr, tqueue_interrupt);
1135 // pB better well be set or we have a problem! We can only get
1136 // here from the IMMEDIATE queue. Here, we process the boards.
1137 // Checking pB doesn't cost much and it saves us from the sanity checkers.
1142 i2ServiceBoard( pB );
1143 if( pB->i2eUsingIrq ) {
1144 // Re-enable his interrupts
1145 iiEnableMailIrq(pB);
1151 /******************************************************************************/
1152 /* Function: ip2_interrupt(int irq, void *dev_id) */
1153 /* Parameters: irq - interrupt number */
1154 /* pointer to optional device ID structure */
1155 /* Returns: Nothing */
1159 /* Our task here is simply to identify each board which needs servicing. */
1160 /* If we are queuing then, queue it to be serviced, and disable its irq */
1161 /* mask otherwise process the board directly. */
1163 /* We could queue by IRQ but that just complicates things on both ends */
1164 /* with very little gain in performance (how many instructions does */
1165 /* it take to iterate on the immediate queue). */
1168 /******************************************************************************/
1170 ip2_interrupt(int irq, void *dev_id)
1176 ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq );
1178 /* Service just the boards on the list using this irq */
1179 for( i = 0; i < i2nBoards; ++i ) {
1180 pB = i2BoardPtrTable[i];
1182 // Only process those boards which match our IRQ.
1183 // IRQ = 0 for polled boards, we won't poll "IRQ" boards
1185 if ( pB && (pB->i2eUsingIrq == irq) ) {
1189 if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) {
1190 // Disable his interrupt (will be enabled when serviced)
1191 // This is mostly to protect from reentrancy.
1192 iiDisableMailIrq(pB);
1194 // Park the board on the immediate queue for processing.
1195 schedule_work(&pB->tqueue_interrupt);
1197 // Make sure the immediate queue is flagged to fire.
1200 // We are using immediate servicing here. This sucks and can
1201 // cause all sorts of havoc with ppp and others. The failsafe
1202 // check on iiSendPendingMail could also throw a hairball.
1203 i2ServiceBoard( pB );
1204 #endif /* USE_IQI */
1210 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1211 return IRQ_RETVAL(handled);
1214 /******************************************************************************/
1215 /* Function: ip2_poll(unsigned long arg) */
1217 /* Returns: Nothing */
1220 /* This function calls the library routine i2ServiceBoard for each board in */
1221 /* the board table. This is used instead of the interrupt routine when polled */
1222 /* mode is specified. */
1223 /******************************************************************************/
1225 ip2_poll(unsigned long arg)
1227 ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 );
1229 TimerOn = 0; // it's the truth but not checked in service
1231 // Just polled boards, IRQ = 0 will hit all non-interrupt boards.
1232 // It will NOT poll boards handled by hard interrupts.
1233 // The issue of queued BH interrups is handled in ip2_interrupt().
1234 ip2_interrupt(0, NULL);
1236 PollTimer.expires = POLL_TIMEOUT;
1237 add_timer( &PollTimer );
1240 ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 );
1243 static void do_input(struct work_struct *work)
1245 i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_input);
1246 unsigned long flags;
1248 ip2trace(CHANN, ITRC_INPUT, 21, 0 );
1251 if ( pCh->pTTY != NULL ) {
1252 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1253 if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) {
1254 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1257 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1259 ip2trace(CHANN, ITRC_INPUT, 22, 0 );
1261 i2InputFlush( pCh );
1265 // code duplicated from n_tty (ldisc)
1266 static inline void isig(int sig, struct tty_struct *tty, int flush)
1269 kill_pgrp(tty->pgrp, sig, 1);
1270 if (flush || !L_NOFLSH(tty)) {
1271 if ( tty->ldisc.flush_buffer )
1272 tty->ldisc.flush_buffer(tty);
1273 i2InputFlush( tty->driver_data );
1277 static void do_status(struct work_struct *work)
1279 i2ChanStrPtr pCh = container_of(work, i2ChanStr, tqueue_status);
1282 status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) );
1284 ip2trace (CHANN, ITRC_STATUS, 21, 1, status );
1286 if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) {
1287 if ( (status & I2_BRK) ) {
1288 // code duplicated from n_tty (ldisc)
1289 if (I_IGNBRK(pCh->pTTY))
1291 if (I_BRKINT(pCh->pTTY)) {
1292 isig(SIGINT, pCh->pTTY, 1);
1295 wake_up_interruptible(&pCh->pTTY->read_wait);
1297 #ifdef NEVER_HAPPENS_AS_SETUP_XXX
1298 // and can't work because we don't know the_char
1299 // as the_char is reported on a separate path
1300 // The intelligent board does this stuff as setup
1302 char brkf = TTY_NORMAL;
1303 unsigned char brkc = '\0';
1305 if ( (status & I2_BRK) ) {
1309 else if (status & I2_PAR) {
1312 } else if (status & I2_FRA) {
1315 } else if (status & I2_OVR) {
1319 tmp = pCh->pTTY->real_raw;
1320 pCh->pTTY->real_raw = 0;
1321 pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 );
1322 pCh->pTTY->real_raw = tmp;
1324 #endif /* NEVER_HAPPENS_AS_SETUP_XXX */
1328 if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) {
1329 wake_up_interruptible(&pCh->delta_msr_wait);
1331 if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) {
1332 if ( status & I2_DCD ) {
1334 wake_up_interruptible ( &pCh->open_wait );
1337 if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) {
1338 tty_hangup( pCh->pTTY );
1344 ip2trace (CHANN, ITRC_STATUS, 26, 0 );
1347 /******************************************************************************/
1348 /* Device Open/Close/Ioctl Entry Point Section */
1349 /******************************************************************************/
1351 /******************************************************************************/
1352 /* Function: open_sanity_check() */
1353 /* Parameters: Pointer to tty structure */
1354 /* Pointer to file structure */
1355 /* Returns: Success or failure */
1358 /* Verifies the structure magic numbers and cross links. */
1359 /******************************************************************************/
1360 #ifdef IP2DEBUG_OPEN
1362 open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd )
1364 if ( pBrd->i2eValid != I2E_MAGIC ) {
1365 printk(KERN_ERR "IP2: invalid board structure\n" );
1366 } else if ( pBrd != pCh->pMyBord ) {
1367 printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n",
1369 } else if ( pBrd->i2eChannelCnt < pCh->port_index ) {
1370 printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index );
1371 } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) {
1373 printk(KERN_INFO "IP2: all pointers check out!\n" );
1379 /******************************************************************************/
1380 /* Function: ip2_open() */
1381 /* Parameters: Pointer to tty structure */
1382 /* Pointer to file structure */
1383 /* Returns: Success or failure */
1385 /* Description: (MANDATORY) */
1386 /* A successful device open has to run a gauntlet of checks before it */
1387 /* completes. After some sanity checking and pointer setup, the function */
1388 /* blocks until all conditions are satisfied. It then initialises the port to */
1389 /* the default characteristics and returns. */
1390 /******************************************************************************/
1392 ip2_open( PTTY tty, struct file *pFile )
1397 i2ChanStrPtr pCh = DevTable[tty->index];
1399 ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 );
1401 if ( pCh == NULL ) {
1404 /* Setup pointer links in device and tty structures */
1406 tty->driver_data = pCh;
1408 #ifdef IP2DEBUG_OPEN
1410 "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n",
1411 tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index);
1412 open_sanity_check ( pCh, pCh->pMyBord );
1415 i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP);
1416 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1417 serviceOutgoingFifo( pCh->pMyBord );
1419 /* Block here until the port is ready (per serial and istallion) */
1421 * 1. If the port is in the middle of closing wait for the completion
1422 * and then return the appropriate error.
1424 init_waitqueue_entry(&wait, current);
1425 add_wait_queue(&pCh->close_wait, &wait);
1426 set_current_state( TASK_INTERRUPTIBLE );
1428 if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) {
1429 if ( pCh->flags & ASYNC_CLOSING ) {
1432 if ( tty_hung_up_p(pFile) ) {
1433 set_current_state( TASK_RUNNING );
1434 remove_wait_queue(&pCh->close_wait, &wait);
1435 return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS;
1438 set_current_state( TASK_RUNNING );
1439 remove_wait_queue(&pCh->close_wait, &wait);
1442 * 3. Handle a non-blocking open of a normal port.
1444 if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<<TTY_IO_ERROR) )) {
1445 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1449 * 4. Now loop waiting for the port to be free and carrier present
1452 if ( tty->termios->c_cflag & CLOCAL )
1455 #ifdef IP2DEBUG_OPEN
1456 printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal);
1461 init_waitqueue_entry(&wait, current);
1462 add_wait_queue(&pCh->open_wait, &wait);
1465 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
1466 pCh->dataSetOut |= (I2_DTR | I2_RTS);
1467 set_current_state( TASK_INTERRUPTIBLE );
1468 serviceOutgoingFifo( pCh->pMyBord );
1469 if ( tty_hung_up_p(pFile) ) {
1470 set_current_state( TASK_RUNNING );
1471 remove_wait_queue(&pCh->open_wait, &wait);
1472 return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS;
1474 if (!(pCh->flags & ASYNC_CLOSING) &&
1475 (do_clocal || (pCh->dataSetIn & I2_DCD) )) {
1480 #ifdef IP2DEBUG_OPEN
1481 printk(KERN_DEBUG "ASYNC_CLOSING = %s\n",
1482 (pCh->flags & ASYNC_CLOSING)?"True":"False");
1483 printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n");
1485 ip2trace (CHANN, ITRC_OPEN, 3, 2, 0,
1486 (pCh->flags & ASYNC_CLOSING) );
1487 /* check for signal */
1488 if (signal_pending(current)) {
1489 rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS);
1494 set_current_state( TASK_RUNNING );
1495 remove_wait_queue(&pCh->open_wait, &wait);
1497 --pCh->wopen; //why count?
1499 ip2trace (CHANN, ITRC_OPEN, 4, 0 );
1504 pCh->flags |= ASYNC_NORMAL_ACTIVE;
1508 /* first open - Assign termios structure to port */
1509 if ( tty->count == 1 ) {
1510 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1511 /* Now we must send the termios settings to the loadware */
1512 set_params( pCh, NULL );
1516 * Now set any i2lib options. These may go away if the i2lib code ends
1517 * up rolled into the mainline.
1519 pCh->channelOptions |= CO_NBLOCK_WRITE;
1521 #ifdef IP2DEBUG_OPEN
1522 printk (KERN_DEBUG "IP2: open completed\n" );
1524 serviceOutgoingFifo( pCh->pMyBord );
1526 ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 );
1531 /******************************************************************************/
1532 /* Function: ip2_close() */
1533 /* Parameters: Pointer to tty structure */
1534 /* Pointer to file structure */
1535 /* Returns: Nothing */
1540 /******************************************************************************/
1542 ip2_close( PTTY tty, struct file *pFile )
1544 i2ChanStrPtr pCh = tty->driver_data;
1550 ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 );
1552 #ifdef IP2DEBUG_OPEN
1553 printk(KERN_DEBUG "IP2:close %s:\n",tty->name);
1556 if ( tty_hung_up_p ( pFile ) ) {
1558 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 );
1562 if ( tty->count > 1 ) { /* not the last close */
1564 ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 );
1568 pCh->flags |= ASYNC_CLOSING; // last close actually
1572 if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) {
1574 * Before we drop DTR, make sure the transmitter has completely drained.
1575 * This uses an timeout, after which the close
1578 ip2_wait_until_sent(tty, pCh->ClosingWaitTime );
1581 * At this point we stop accepting input. Here we flush the channel
1582 * input buffer which will allow the board to send up more data. Any
1583 * additional input is tossed at interrupt/poll time.
1585 i2InputFlush( pCh );
1587 /* disable DSS reporting */
1588 i2QueueCommands(PTYPE_INLINE, pCh, 100, 4,
1589 CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1590 if ( !tty || (tty->termios->c_cflag & HUPCL) ) {
1591 i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
1592 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1593 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1596 serviceOutgoingFifo ( pCh->pMyBord );
1598 if ( tty->driver->flush_buffer )
1599 tty->driver->flush_buffer(tty);
1600 if ( tty->ldisc.flush_buffer )
1601 tty->ldisc.flush_buffer(tty);
1607 if (pCh->ClosingDelay) {
1608 msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay));
1610 wake_up_interruptible(&pCh->open_wait);
1613 pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
1614 wake_up_interruptible(&pCh->close_wait);
1616 #ifdef IP2DEBUG_OPEN
1617 DBG_CNT("ip2_close: after wakeups--");
1621 ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 );
1626 /******************************************************************************/
1627 /* Function: ip2_hangup() */
1628 /* Parameters: Pointer to tty structure */
1629 /* Returns: Nothing */
1634 /******************************************************************************/
1636 ip2_hangup ( PTTY tty )
1638 i2ChanStrPtr pCh = tty->driver_data;
1644 ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 );
1646 ip2_flush_buffer(tty);
1648 /* disable DSS reporting */
1650 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP);
1651 i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
1652 if ( (tty->termios->c_cflag & HUPCL) ) {
1653 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN);
1654 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
1655 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
1657 i2QueueCommands(PTYPE_INLINE, pCh, 1, 3,
1658 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
1659 serviceOutgoingFifo ( pCh->pMyBord );
1661 wake_up_interruptible ( &pCh->delta_msr_wait );
1663 pCh->flags &= ~ASYNC_NORMAL_ACTIVE;
1665 wake_up_interruptible ( &pCh->open_wait );
1667 ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 );
1670 /******************************************************************************/
1671 /******************************************************************************/
1672 /* Device Output Section */
1673 /******************************************************************************/
1674 /******************************************************************************/
1676 /******************************************************************************/
1677 /* Function: ip2_write() */
1678 /* Parameters: Pointer to tty structure */
1679 /* Flag denoting data is in user (1) or kernel (0) space */
1680 /* Pointer to data */
1681 /* Number of bytes to write */
1682 /* Returns: Number of bytes actually written */
1684 /* Description: (MANDATORY) */
1687 /******************************************************************************/
1689 ip2_write( PTTY tty, const unsigned char *pData, int count)
1691 i2ChanStrPtr pCh = tty->driver_data;
1693 unsigned long flags;
1695 ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 );
1697 /* Flush out any buffered data left over from ip2_putchar() calls. */
1698 ip2_flush_chars( tty );
1700 /* This is the actual move bit. Make sure it does what we need!!!!! */
1701 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1702 bytesSent = i2Output( pCh, pData, count);
1703 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1705 ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent );
1707 return bytesSent > 0 ? bytesSent : 0;
1710 /******************************************************************************/
1711 /* Function: ip2_putchar() */
1712 /* Parameters: Pointer to tty structure */
1713 /* Character to write */
1714 /* Returns: Nothing */
1719 /******************************************************************************/
1721 ip2_putchar( PTTY tty, unsigned char ch )
1723 i2ChanStrPtr pCh = tty->driver_data;
1724 unsigned long flags;
1726 // ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch );
1728 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1729 pCh->Pbuf[pCh->Pbuf_stuff++] = ch;
1730 if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) {
1731 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1732 ip2_flush_chars( tty );
1734 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1736 // ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch );
1739 /******************************************************************************/
1740 /* Function: ip2_flush_chars() */
1741 /* Parameters: Pointer to tty structure */
1742 /* Returns: Nothing */
1746 /******************************************************************************/
1748 ip2_flush_chars( PTTY tty )
1751 i2ChanStrPtr pCh = tty->driver_data;
1752 unsigned long flags;
1754 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1755 if ( pCh->Pbuf_stuff ) {
1757 // ip2trace (CHANN, ITRC_PUTC, 10, 1, strip );
1760 // We may need to restart i2Output if it does not fullfill this request
1762 strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff);
1763 if ( strip != pCh->Pbuf_stuff ) {
1764 memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip );
1766 pCh->Pbuf_stuff -= strip;
1768 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1771 /******************************************************************************/
1772 /* Function: ip2_write_room() */
1773 /* Parameters: Pointer to tty structure */
1774 /* Returns: Number of bytes that the driver can accept */
1778 /******************************************************************************/
1780 ip2_write_room ( PTTY tty )
1783 i2ChanStrPtr pCh = tty->driver_data;
1784 unsigned long flags;
1786 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1787 bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff;
1788 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1790 ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree );
1792 return ((bytesFree > 0) ? bytesFree : 0);
1795 /******************************************************************************/
1796 /* Function: ip2_chars_in_buf() */
1797 /* Parameters: Pointer to tty structure */
1798 /* Returns: Number of bytes queued for transmission */
1803 /******************************************************************************/
1805 ip2_chars_in_buf ( PTTY tty )
1807 i2ChanStrPtr pCh = tty->driver_data;
1809 unsigned long flags;
1811 ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff );
1813 #ifdef IP2DEBUG_WRITE
1814 printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n",
1815 pCh->Obuf_char_count + pCh->Pbuf_stuff,
1816 pCh->Obuf_char_count, pCh->Pbuf_stuff );
1818 READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags);
1819 rc = pCh->Obuf_char_count;
1820 READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags);
1821 READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1822 rc += pCh->Pbuf_stuff;
1823 READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1827 /******************************************************************************/
1828 /* Function: ip2_flush_buffer() */
1829 /* Parameters: Pointer to tty structure */
1830 /* Returns: Nothing */
1835 /******************************************************************************/
1837 ip2_flush_buffer( PTTY tty )
1839 i2ChanStrPtr pCh = tty->driver_data;
1840 unsigned long flags;
1842 ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 );
1844 #ifdef IP2DEBUG_WRITE
1845 printk (KERN_DEBUG "IP2: flush buffer\n" );
1847 WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags);
1848 pCh->Pbuf_stuff = 0;
1849 WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags);
1850 i2FlushOutput( pCh );
1853 ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 );
1857 /******************************************************************************/
1858 /* Function: ip2_wait_until_sent() */
1859 /* Parameters: Pointer to tty structure */
1860 /* Timeout for wait. */
1861 /* Returns: Nothing */
1864 /* This function is used in place of the normal tty_wait_until_sent, which */
1865 /* only waits for the driver buffers to be empty (or rather, those buffers */
1866 /* reported by chars_in_buffer) which doesn't work for IP2 due to the */
1867 /* indeterminate number of bytes buffered on the board. */
1868 /******************************************************************************/
1870 ip2_wait_until_sent ( PTTY tty, int timeout )
1873 i2ChanStrPtr pCh = tty->driver_data;
1875 tty_wait_until_sent(tty, timeout );
1876 if ( (i = timeout - (jiffies -i)) > 0)
1877 i2DrainOutput( pCh, i );
1880 /******************************************************************************/
1881 /******************************************************************************/
1882 /* Device Input Section */
1883 /******************************************************************************/
1884 /******************************************************************************/
1886 /******************************************************************************/
1887 /* Function: ip2_throttle() */
1888 /* Parameters: Pointer to tty structure */
1889 /* Returns: Nothing */
1894 /******************************************************************************/
1896 ip2_throttle ( PTTY tty )
1898 i2ChanStrPtr pCh = tty->driver_data;
1900 #ifdef IP2DEBUG_READ
1901 printk (KERN_DEBUG "IP2: throttle\n" );
1904 * Signal the poll/interrupt handlers not to forward incoming data to
1905 * the line discipline. This will cause the buffers to fill up in the
1906 * library and thus cause the library routines to send the flow control
1912 /******************************************************************************/
1913 /* Function: ip2_unthrottle() */
1914 /* Parameters: Pointer to tty structure */
1915 /* Returns: Nothing */
1920 /******************************************************************************/
1922 ip2_unthrottle ( PTTY tty )
1924 i2ChanStrPtr pCh = tty->driver_data;
1925 unsigned long flags;
1927 #ifdef IP2DEBUG_READ
1928 printk (KERN_DEBUG "IP2: unthrottle\n" );
1931 /* Pass incoming data up to the line discipline again. */
1933 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1934 serviceOutgoingFifo( pCh->pMyBord );
1935 READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags)
1936 if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) {
1937 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1938 #ifdef IP2DEBUG_READ
1939 printk (KERN_DEBUG "i2Input called from unthrottle\n" );
1943 READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags)
1947 ip2_start ( PTTY tty )
1949 i2ChanStrPtr pCh = DevTable[tty->index];
1951 i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME);
1952 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND);
1953 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME);
1954 #ifdef IP2DEBUG_WRITE
1955 printk (KERN_DEBUG "IP2: start tx\n" );
1960 ip2_stop ( PTTY tty )
1962 i2ChanStrPtr pCh = DevTable[tty->index];
1964 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND);
1965 #ifdef IP2DEBUG_WRITE
1966 printk (KERN_DEBUG "IP2: stop tx\n" );
1970 /******************************************************************************/
1971 /* Device Ioctl Section */
1972 /******************************************************************************/
1974 static int ip2_tiocmget(struct tty_struct *tty, struct file *file)
1976 i2ChanStrPtr pCh = DevTable[tty->index];
1977 #ifdef ENABLE_DSSNOW
1985 FIXME - the following code is causing a NULL pointer dereference in
1986 2.3.51 in an interrupt handler. It's suppose to prompt the board
1987 to return the DSS signal status immediately. Why doesn't it do
1988 the same thing in 2.2.14?
1991 /* This thing is still busted in the 1.2.12 driver on 2.4.x
1992 and even hoses the serial console so the oops can be trapped.
1995 #ifdef ENABLE_DSSNOW
1996 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW);
1998 init_waitqueue_entry(&wait, current);
1999 add_wait_queue(&pCh->dss_now_wait, &wait);
2000 set_current_state( TASK_INTERRUPTIBLE );
2002 serviceOutgoingFifo( pCh->pMyBord );
2006 set_current_state( TASK_RUNNING );
2007 remove_wait_queue(&pCh->dss_now_wait, &wait);
2009 if (signal_pending(current)) {
2013 return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0)
2014 | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0)
2015 | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0)
2016 | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0)
2017 | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0)
2018 | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0);
2021 static int ip2_tiocmset(struct tty_struct *tty, struct file *file,
2022 unsigned int set, unsigned int clear)
2024 i2ChanStrPtr pCh = DevTable[tty->index];
2029 if (set & TIOCM_RTS) {
2030 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP);
2031 pCh->dataSetOut |= I2_RTS;
2033 if (set & TIOCM_DTR) {
2034 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP);
2035 pCh->dataSetOut |= I2_DTR;
2038 if (clear & TIOCM_RTS) {
2039 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN);
2040 pCh->dataSetOut &= ~I2_RTS;
2042 if (clear & TIOCM_DTR) {
2043 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN);
2044 pCh->dataSetOut &= ~I2_DTR;
2046 serviceOutgoingFifo( pCh->pMyBord );
2050 /******************************************************************************/
2051 /* Function: ip2_ioctl() */
2052 /* Parameters: Pointer to tty structure */
2053 /* Pointer to file structure */
2056 /* Returns: Success or failure */
2061 /******************************************************************************/
2063 ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg )
2066 i2ChanStrPtr pCh = DevTable[tty->index];
2068 struct async_icount cprev, cnow; /* kernel counter temps */
2069 struct serial_icounter_struct __user *p_cuser;
2071 unsigned long flags;
2072 void __user *argp = (void __user *)arg;
2079 ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg );
2081 #ifdef IP2DEBUG_IOCTL
2082 printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg );
2088 ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc );
2090 rc = get_serial_info(pCh, argp);
2097 ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc );
2099 rc = set_serial_info(pCh, argp);
2105 rc = tty_check_change(tty);
2110 //return -ENOIOCTLCMD;
2113 //return -ENOIOCTLCMD;
2116 if (STOP_CHAR(tty) != __DISABLED_CHAR) {
2117 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2118 CMD_XMIT_NOW(STOP_CHAR(tty)));
2122 if (START_CHAR(tty) != __DISABLED_CHAR) {
2123 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1,
2124 CMD_XMIT_NOW(START_CHAR(tty)));
2132 case TCSBRK: /* SVID version: non-zero arg --> no break */
2133 rc = tty_check_change(tty);
2135 ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc );
2138 ip2_wait_until_sent(tty,0);
2140 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250));
2141 serviceOutgoingFifo( pCh->pMyBord );
2146 case TCSBRKP: /* support for POSIX tcsendbreak() */
2147 rc = tty_check_change(tty);
2149 ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc );
2152 ip2_wait_until_sent(tty,0);
2153 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2154 CMD_SEND_BRK(arg ? arg*100 : 250));
2155 serviceOutgoingFifo ( pCh->pMyBord );
2161 ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc );
2163 rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp);
2170 ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc );
2172 rc = get_user(arg,(unsigned long __user *) argp);
2175 tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL)
2176 | (arg ? CLOCAL : 0));
2181 * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask
2182 * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS
2183 * for masking). Caller should use TIOCGICOUNT to see which one it was
2186 WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
2187 cprev = pCh->icount; /* note the counters on entry */
2188 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
2189 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4,
2190 CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP);
2191 init_waitqueue_entry(&wait, current);
2192 add_wait_queue(&pCh->delta_msr_wait, &wait);
2193 set_current_state( TASK_INTERRUPTIBLE );
2195 serviceOutgoingFifo( pCh->pMyBord );
2197 ip2trace (CHANN, ITRC_IOCTL, 10, 0 );
2201 ip2trace (CHANN, ITRC_IOCTL, 11, 0 );
2203 /* see if a signal did it */
2204 if (signal_pending(current)) {
2208 WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
2209 cnow = pCh->icount; /* atomic copy */
2210 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
2211 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
2212 cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
2213 rc = -EIO; /* no change => rc */
2216 if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
2217 ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
2218 ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
2219 ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) {
2225 set_current_state( TASK_RUNNING );
2226 remove_wait_queue(&pCh->delta_msr_wait, &wait);
2228 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3,
2229 CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP);
2230 if ( ! (pCh->flags & ASYNC_CHECK_CD)) {
2231 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP);
2233 serviceOutgoingFifo( pCh->pMyBord );
2238 * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
2239 * Return: write counters to the user passed counter struct
2240 * NB: both 1->0 and 0->1 transitions are counted except for RI where
2241 * only 0->1 is counted. The controller is quite capable of counting
2242 * both, but this done to preserve compatibility with the standard
2246 ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc );
2248 WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags);
2250 WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags);
2252 rc = put_user(cnow.cts, &p_cuser->cts);
2253 rc = put_user(cnow.dsr, &p_cuser->dsr);
2254 rc = put_user(cnow.rng, &p_cuser->rng);
2255 rc = put_user(cnow.dcd, &p_cuser->dcd);
2256 rc = put_user(cnow.rx, &p_cuser->rx);
2257 rc = put_user(cnow.tx, &p_cuser->tx);
2258 rc = put_user(cnow.frame, &p_cuser->frame);
2259 rc = put_user(cnow.overrun, &p_cuser->overrun);
2260 rc = put_user(cnow.parity, &p_cuser->parity);
2261 rc = put_user(cnow.brk, &p_cuser->brk);
2262 rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun);
2266 * The rest are not supported by this driver. By returning -ENOIOCTLCMD they
2267 * will be passed to the line discipline for it to handle.
2273 case TIOCSERGSTRUCT:
2274 case TIOCSERGETMULTI:
2275 case TIOCSERSETMULTI:
2278 ip2trace (CHANN, ITRC_IOCTL, 12, 0 );
2284 ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 );
2289 /******************************************************************************/
2290 /* Function: GetSerialInfo() */
2291 /* Parameters: Pointer to channel structure */
2292 /* Pointer to old termios structure */
2293 /* Returns: Nothing */
2296 /* This is to support the setserial command, and requires processing of the */
2297 /* standard Linux serial structure. */
2298 /******************************************************************************/
2300 get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo )
2302 struct serial_struct tmp;
2304 memset ( &tmp, 0, sizeof(tmp) );
2305 tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16];
2306 if (BID_HAS_654(tmp.type)) {
2307 tmp.type = PORT_16650;
2309 tmp.type = PORT_CIRRUS;
2311 tmp.line = pCh->port_index;
2312 tmp.port = pCh->pMyBord->i2eBase;
2313 tmp.irq = ip2config.irq[pCh->port_index/64];
2314 tmp.flags = pCh->flags;
2315 tmp.baud_base = pCh->BaudBase;
2316 tmp.close_delay = pCh->ClosingDelay;
2317 tmp.closing_wait = pCh->ClosingWaitTime;
2318 tmp.custom_divisor = pCh->BaudDivisor;
2319 return copy_to_user(retinfo,&tmp,sizeof(*retinfo));
2322 /******************************************************************************/
2323 /* Function: SetSerialInfo() */
2324 /* Parameters: Pointer to channel structure */
2325 /* Pointer to old termios structure */
2326 /* Returns: Nothing */
2329 /* This function provides support for setserial, which uses the TIOCSSERIAL */
2330 /* ioctl. Not all setserial parameters are relevant. If the user attempts to */
2331 /* change the IRQ, address or type of the port the ioctl fails. */
2332 /******************************************************************************/
2334 set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info )
2336 struct serial_struct ns;
2337 int old_flags, old_baud_divisor;
2339 if (copy_from_user(&ns, new_info, sizeof (ns)))
2343 * We don't allow setserial to change IRQ, board address, type or baud
2344 * base. Also line nunber as such is meaningless but we use it for our
2345 * array index so it is fixed also.
2347 if ( (ns.irq != ip2config.irq[pCh->port_index])
2348 || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase)))
2349 || (ns.baud_base != pCh->BaudBase)
2350 || (ns.line != pCh->port_index) ) {
2354 old_flags = pCh->flags;
2355 old_baud_divisor = pCh->BaudDivisor;
2357 if ( !capable(CAP_SYS_ADMIN) ) {
2358 if ( ( ns.close_delay != pCh->ClosingDelay ) ||
2359 ( (ns.flags & ~ASYNC_USR_MASK) !=
2360 (pCh->flags & ~ASYNC_USR_MASK) ) ) {
2364 pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) |
2365 (ns.flags & ASYNC_USR_MASK);
2366 pCh->BaudDivisor = ns.custom_divisor;
2368 pCh->flags = (pCh->flags & ~ASYNC_FLAGS) |
2369 (ns.flags & ASYNC_FLAGS);
2370 pCh->BaudDivisor = ns.custom_divisor;
2371 pCh->ClosingDelay = ns.close_delay * HZ/100;
2372 pCh->ClosingWaitTime = ns.closing_wait * HZ/100;
2375 if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) )
2376 || (old_baud_divisor != pCh->BaudDivisor) ) {
2377 // Invalidate speed and reset parameters
2378 set_params( pCh, NULL );
2384 /******************************************************************************/
2385 /* Function: ip2_set_termios() */
2386 /* Parameters: Pointer to tty structure */
2387 /* Pointer to old termios structure */
2388 /* Returns: Nothing */
2393 /******************************************************************************/
2395 ip2_set_termios( PTTY tty, struct ktermios *old_termios )
2397 i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data;
2399 #ifdef IP2DEBUG_IOCTL
2400 printk (KERN_DEBUG "IP2: set termios %p\n", old_termios );
2403 set_params( pCh, old_termios );
2406 /******************************************************************************/
2407 /* Function: ip2_set_line_discipline() */
2408 /* Parameters: Pointer to tty structure */
2409 /* Returns: Nothing */
2411 /* Description: Does nothing */
2414 /******************************************************************************/
2416 ip2_set_line_discipline ( PTTY tty )
2418 #ifdef IP2DEBUG_IOCTL
2419 printk (KERN_DEBUG "IP2: set line discipline\n" );
2422 ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 );
2426 /******************************************************************************/
2427 /* Function: SetLine Characteristics() */
2428 /* Parameters: Pointer to channel structure */
2429 /* Returns: Nothing */
2432 /* This routine is called to update the channel structure with the new line */
2433 /* characteristics, and send the appropriate commands to the board when they */
2435 /******************************************************************************/
2437 set_params( i2ChanStrPtr pCh, struct ktermios *o_tios )
2439 tcflag_t cflag, iflag, lflag;
2440 char stop_char, start_char;
2441 struct ktermios dummy;
2443 lflag = pCh->pTTY->termios->c_lflag;
2444 cflag = pCh->pTTY->termios->c_cflag;
2445 iflag = pCh->pTTY->termios->c_iflag;
2447 if (o_tios == NULL) {
2448 dummy.c_lflag = ~lflag;
2449 dummy.c_cflag = ~cflag;
2450 dummy.c_iflag = ~iflag;
2455 switch ( cflag & CBAUD ) {
2457 i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN);
2458 pCh->dataSetOut &= ~(I2_DTR | I2_RTS);
2459 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25));
2460 pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag);
2465 * This is the speed that is overloaded with all the other high
2466 * speeds, depending upon the flag settings.
2468 if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) {
2469 pCh->speed = CBR_57600;
2470 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) {
2471 pCh->speed = CBR_115200;
2472 } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) {
2473 pCh->speed = CBR_C1;
2475 pCh->speed = CBR_38400;
2478 case B50: pCh->speed = CBR_50; break;
2479 case B75: pCh->speed = CBR_75; break;
2480 case B110: pCh->speed = CBR_110; break;
2481 case B134: pCh->speed = CBR_134; break;
2482 case B150: pCh->speed = CBR_150; break;
2483 case B200: pCh->speed = CBR_200; break;
2484 case B300: pCh->speed = CBR_300; break;
2485 case B600: pCh->speed = CBR_600; break;
2486 case B1200: pCh->speed = CBR_1200; break;
2487 case B1800: pCh->speed = CBR_1800; break;
2488 case B2400: pCh->speed = CBR_2400; break;
2489 case B4800: pCh->speed = CBR_4800; break;
2490 case B9600: pCh->speed = CBR_9600; break;
2491 case B19200: pCh->speed = CBR_19200; break;
2492 case B57600: pCh->speed = CBR_57600; break;
2493 case B115200: pCh->speed = CBR_115200; break;
2494 case B153600: pCh->speed = CBR_153600; break;
2495 case B230400: pCh->speed = CBR_230400; break;
2496 case B307200: pCh->speed = CBR_307200; break;
2497 case B460800: pCh->speed = CBR_460800; break;
2498 case B921600: pCh->speed = CBR_921600; break;
2499 default: pCh->speed = CBR_9600; break;
2501 if ( pCh->speed == CBR_C1 ) {
2502 // Process the custom speed parameters.
2503 int bps = pCh->BaudBase / pCh->BaudDivisor;
2504 if ( bps == 921600 ) {
2505 pCh->speed = CBR_921600;
2508 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) );
2511 i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed));
2513 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP);
2514 pCh->dataSetOut |= (I2_DTR | I2_RTS);
2516 if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag))
2518 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2519 CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1));
2521 if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag))
2523 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1,
2525 (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP)
2529 /* byte size and parity */
2530 if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag))
2533 switch ( cflag & CSIZE ) {
2534 case CS5: datasize = CSZ_5; break;
2535 case CS6: datasize = CSZ_6; break;
2536 case CS7: datasize = CSZ_7; break;
2537 case CS8: datasize = CSZ_8; break;
2538 default: datasize = CSZ_5; break; /* as per serial.c */
2540 i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) );
2542 /* Process CTS flow control flag setting */
2543 if ( (cflag & CRTSCTS) ) {
2544 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2545 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB);
2547 i2QueueCommands(PTYPE_INLINE, pCh, 100,
2548 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB);
2551 // Process XON/XOFF flow control flags settings
2553 stop_char = STOP_CHAR(pCh->pTTY);
2554 start_char = START_CHAR(pCh->pTTY);
2556 //////////// can't be \000
2557 if (stop_char == __DISABLED_CHAR )
2559 stop_char = ~__DISABLED_CHAR;
2561 if (start_char == __DISABLED_CHAR )
2563 start_char = ~__DISABLED_CHAR;
2565 /////////////////////////////////
2567 if ( o_tios->c_cc[VSTART] != start_char )
2569 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char));
2570 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char));
2572 if ( o_tios->c_cc[VSTOP] != stop_char )
2574 i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char));
2575 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char));
2577 if (stop_char == __DISABLED_CHAR )
2579 stop_char = ~__DISABLED_CHAR; //TEST123
2582 if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF)))
2584 if ( iflag & IXOFF ) { // Enable XOFF output flow control
2585 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON));
2586 } else { // Disable XOFF output flow control
2588 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE));
2591 if (start_char == __DISABLED_CHAR )
2595 if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY)))
2597 if ( iflag & IXON ) {
2598 if ( iflag & IXANY ) { // Enable XON/XANY output flow control
2599 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY));
2600 } else { // Enable XON output flow control
2601 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON));
2603 } else { // Disable XON output flow control
2605 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE));
2608 if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) )
2610 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2611 CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0)));
2613 if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) )
2615 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1,
2616 CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB));
2619 if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR))
2620 ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) )
2625 if ( iflag & IGNBRK ) { /* Ignore breaks altogether */
2626 /* Ignore breaks altogether */
2627 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP);
2629 if ( iflag & BRKINT ) {
2630 if ( iflag & PARMRK ) {
2631 brkrpt = 0x0a; // exception an inline triple
2633 brkrpt = 0x1a; // exception and NULL
2635 brkrpt |= 0x04; // flush input
2637 if ( iflag & PARMRK ) {
2638 brkrpt = 0x0b; //POSIX triple \0377 \0 \0
2640 brkrpt = 0x01; // Null only
2643 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt));
2646 if (iflag & IGNPAR) {
2648 /* would be 2 for not cirrus bug */
2649 /* would be 0x20 cept for cirrus bug */
2651 if ( iflag & PARMRK ) {
2653 * Replace error characters with 3-byte sequence (\0377,\0,char)
2656 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0));
2661 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt));
2663 if (cflag & CLOCAL) {
2664 // Status reporting fails for DCD if this is off
2665 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP);
2666 pCh->flags &= ~ASYNC_CHECK_CD;
2668 i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP);
2669 pCh->flags |= ASYNC_CHECK_CD;
2673 i2DrainOutput( pCh, 100 );
2676 /******************************************************************************/
2677 /* IPL Device Section */
2678 /******************************************************************************/
2680 /******************************************************************************/
2681 /* Function: ip2_ipl_read() */
2682 /* Parameters: Pointer to device inode */
2683 /* Pointer to file structure */
2684 /* Pointer to data */
2685 /* Number of bytes to read */
2686 /* Returns: Success or failure */
2688 /* Description: Ugly */
2691 /******************************************************************************/
2695 ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off )
2697 unsigned int minor = iminor(pFile->f_path.dentry->d_inode);
2701 printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count );
2705 case 0: // IPL device
2708 case 1: // Status dump
2711 case 2: // Ping device
2714 case 3: // Trace device
2715 rc = DumpTraceBuffer ( pData, count );
2717 case 4: // Trace device
2718 rc = DumpFifoBuffer ( pData, count );
2728 DumpFifoBuffer ( char __user *pData, int count )
2732 rc = copy_to_user(pData, DBGBuf, count);
2734 printk(KERN_DEBUG "Last index %d\n", I );
2737 #endif /* DEBUG_FIFO */
2742 DumpTraceBuffer ( char __user *pData, int count )
2744 #ifdef IP2DEBUG_TRACE
2748 int *pIndex = (int __user *)pData;
2750 if ( count < (sizeof(int) * 6) ) {
2753 rc = put_user(tracewrap, pIndex );
2754 rc = put_user(TRACEMAX, ++pIndex );
2755 rc = put_user(tracestrip, ++pIndex );
2756 rc = put_user(tracestuff, ++pIndex );
2757 pData += sizeof(int) * 6;
2758 count -= sizeof(int) * 6;
2760 dumpcount = tracestuff - tracestrip;
2761 if ( dumpcount < 0 ) {
2762 dumpcount += TRACEMAX;
2764 if ( dumpcount > count ) {
2767 chunk = TRACEMAX - tracestrip;
2768 if ( dumpcount > chunk ) {
2769 rc = copy_to_user(pData, &tracebuf[tracestrip],
2770 chunk * sizeof(tracebuf[0]) );
2771 pData += chunk * sizeof(tracebuf[0]);
2773 chunk = dumpcount - chunk;
2777 rc = copy_to_user(pData, &tracebuf[tracestrip],
2778 chunk * sizeof(tracebuf[0]) );
2779 tracestrip += chunk;
2782 rc = put_user(tracestrip, ++pIndex );
2783 rc = put_user(tracestuff, ++pIndex );
2791 /******************************************************************************/
2792 /* Function: ip2_ipl_write() */
2794 /* Pointer to file structure */
2795 /* Pointer to data */
2796 /* Number of bytes to write */
2797 /* Returns: Success or failure */
2802 /******************************************************************************/
2804 ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off)
2807 printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count );
2812 /******************************************************************************/
2813 /* Function: ip2_ipl_ioctl() */
2814 /* Parameters: Pointer to device inode */
2815 /* Pointer to file structure */
2818 /* Returns: Success or failure */
2823 /******************************************************************************/
2825 ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg )
2827 unsigned int iplminor = iminor(pInode);
2829 void __user *argp = (void __user *)arg;
2830 ULONG __user *pIndex = argp;
2831 i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4];
2835 printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg );
2838 switch ( iplminor ) {
2839 case 0: // IPL device
2842 case 1: // Status dump
2847 case 64: /* Driver - ip2stat */
2848 rc = put_user(ip2_tty_driver->refcount, pIndex++ );
2849 rc = put_user(irq_counter, pIndex++ );
2850 rc = put_user(bh_counter, pIndex++ );
2853 case 65: /* Board - ip2stat */
2855 rc = copy_to_user(argp, pB, sizeof(i2eBordStr));
2856 rc = put_user(INB(pB->i2eStatus),
2857 (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) );
2864 if (cmd < IP2_MAX_PORTS) {
2865 pCh = DevTable[cmd];
2868 rc = copy_to_user(argp, pCh, sizeof(i2ChanStr));
2878 case 2: // Ping device
2881 case 3: // Trace device
2883 * akpm: This used to write a whole bunch of function addresses
2884 * to userspace, which generated lots of put_user() warnings.
2885 * I killed it all. Just return "success" and don't do
2901 /******************************************************************************/
2902 /* Function: ip2_ipl_open() */
2903 /* Parameters: Pointer to device inode */
2904 /* Pointer to file structure */
2905 /* Returns: Success or failure */
2910 /******************************************************************************/
2912 ip2_ipl_open( struct inode *pInode, struct file *pFile )
2914 unsigned int iplminor = iminor(pInode);
2919 printk (KERN_DEBUG "IP2IPL: open\n" );
2923 // These are the IPL devices
2930 // These are the status devices
2937 // These are the debug devices
2942 pB = i2BoardPtrTable[iplminor / 4];
2943 pCh = (i2ChanStrPtr) pB->i2eChannelPtr;
2946 // This is the trace device
2952 /******************************************************************************/
2953 /* Function: ip2_read_procmem */
2956 /* Returns: Length of output */
2959 /* Supplies some driver operating parameters */
2960 /* Not real useful unless your debugging the fifo */
2962 /******************************************************************************/
2964 #define LIMIT (PAGE_SIZE - 120)
2967 ip2_read_procmem(char *buf, char **start, off_t offset, int len)
2976 #define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n"
2977 #define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n"
2978 #define FMTLIN3 " 0x%04x 0x%04x rc flow\n"
2980 len += sprintf(buf+len,"\n");
2982 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
2983 pB = i2BoardPtrTable[i];
2985 len += sprintf(buf+len,"board %d:\n",i);
2986 len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n",
2987 pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting);
2991 len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n");
2992 for (i=0; i < IP2_MAX_PORTS; i++) {
2998 if (tty && tty->count) {
2999 len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags,
3000 tty->termios->c_cflag,tty->termios->c_iflag);
3002 len += sprintf(buf+len,FMTLIN2,
3003 pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds);
3004 len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room);
3012 * This is the handler for /proc/tty/driver/ip2
3014 * This stretch of code has been largely plagerized from at least three
3015 * different sources including ip2mkdev.c and a couple of other drivers.
3016 * The bugs are all mine. :-) =mhw=
3018 static int ip2_read_proc(char *page, char **start, off_t off,
3019 int count, int *eof, void *data)
3029 len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion );
3030 len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n",
3031 IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR,
3032 IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX);
3034 for( i = 0; i < IP2_MAX_BOARDS; ++i ) {
3035 /* This need to be reset for a board by board count... */
3037 pB = i2BoardPtrTable[i];
3039 switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED )
3042 len += sprintf( page+len, "Board %d: EX ports=", i );
3043 for( box = 0; box < ABS_MAX_BOXES; ++box )
3047 if( pB->i2eChannelMap[box] != 0 ) ++boxes;
3048 for( j = 0; j < ABS_BIGGEST_BOX; ++j )
3050 if( pB->i2eChannelMap[box] & 1<< j ) {
3054 len += sprintf( page+len, "%d,", ports );
3058 --len; /* Backup over that last comma */
3060 len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 );
3064 len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i );
3069 len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i );
3074 len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i );
3079 len += sprintf(page+len, "Board %d: unknown", i );
3080 /* Don't try and probe for minor numbers */
3085 /* Don't try and probe for minor numbers */
3086 len += sprintf(page+len, "Board %d: vacant", i );
3091 len += sprintf(page+len, " minors=" );
3093 for ( box = 0; box < ABS_MAX_BOXES; ++box )
3095 for ( j = 0; j < ABS_BIGGEST_BOX; ++j )
3097 if ( pB->i2eChannelMap[box] & (1 << j) )
3099 len += sprintf (page+len,"%d,",
3100 j + ABS_BIGGEST_BOX *
3101 (box+i*ABS_MAX_BOXES));
3106 page[ len - 1 ] = '\n'; /* Overwrite that last comma */
3108 len += sprintf (page+len,"\n" );
3111 if (len+begin > off+count)
3113 if (len+begin < off) {
3119 if (i >= IP2_MAX_BOARDS)
3121 if (off >= len+begin)
3124 *start = page + (off-begin);
3125 return ((count < begin+len-off) ? count : begin+len-off);
3128 /******************************************************************************/
3129 /* Function: ip2trace() */
3130 /* Parameters: Value to add to trace buffer */
3131 /* Returns: Nothing */
3136 /******************************************************************************/
3137 #ifdef IP2DEBUG_TRACE
3139 ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...)
3142 unsigned long *pCode = &codes;
3143 union ip2breadcrumb bc;
3147 tracebuf[tracestuff++] = jiffies;
3148 if ( tracestuff == TRACEMAX ) {
3151 if ( tracestuff == tracestrip ) {
3152 if ( ++tracestrip == TRACEMAX ) {
3158 bc.hdr.port = 0xff & pn;
3160 bc.hdr.codes = (unsigned char)( codes & 0xff );
3161 bc.hdr.label = label;
3162 tracebuf[tracestuff++] = bc.value;
3165 if ( tracestuff == TRACEMAX ) {
3168 if ( tracestuff == tracestrip ) {
3169 if ( ++tracestrip == TRACEMAX ) {
3178 tracebuf[tracestuff++] = *++pCode;
3184 MODULE_LICENSE("GPL");
3186 static struct pci_device_id ip2main_pci_tbl[] __devinitdata = {
3187 { PCI_DEVICE(PCI_VENDOR_ID_COMPUTONE, PCI_DEVICE_ID_COMPUTONE_IP2EX) },
3191 MODULE_DEVICE_TABLE(pci, ip2main_pci_tbl);