2  *  IBM eServer eHCA Infiniband device driver for Linux on POWER
 
   6  *  Authors: Joachim Fenkes <fenkes@de.ibm.com>
 
   7  *           Stefan Roscher <stefan.roscher@de.ibm.com>
 
   8  *           Waleri Fomin <fomin@de.ibm.com>
 
   9  *           Hoang-Nam Nguyen <hnguyen@de.ibm.com>
 
  10  *           Reinhard Ernst <rernst@de.ibm.com>
 
  11  *           Heiko J Schick <schickhj@de.ibm.com>
 
  13  *  Copyright (c) 2005 IBM Corporation
 
  15  *  All rights reserved.
 
  17  *  This source code is distributed under a dual license of GPL v2.0 and OpenIB
 
  22  * Redistribution and use in source and binary forms, with or without
 
  23  * modification, are permitted provided that the following conditions are met:
 
  25  * Redistributions of source code must retain the above copyright notice, this
 
  26  * list of conditions and the following disclaimer.
 
  28  * Redistributions in binary form must reproduce the above copyright notice,
 
  29  * this list of conditions and the following disclaimer in the documentation
 
  30  * and/or other materials
 
  31  * provided with the distribution.
 
  33  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
 
  34  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 
  35  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 
  36  * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
 
  37  * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 
  38  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 
  39  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 
  40  * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
 
  41  * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 
  42  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 
  43  * POSSIBILITY OF SUCH DAMAGE.
 
  46 #include "ehca_classes.h"
 
  47 #include "ehca_tools.h"
 
  49 #include "ehca_iverbs.h"
 
  53 static struct kmem_cache *qp_cache;
 
  56  * attributes not supported by query qp
 
  58 #define QP_ATTR_QUERY_NOT_SUPPORTED (IB_QP_MAX_DEST_RD_ATOMIC | \
 
  59                                      IB_QP_MAX_QP_RD_ATOMIC   | \
 
  60                                      IB_QP_ACCESS_FLAGS       | \
 
  61                                      IB_QP_EN_SQD_ASYNC_NOTIFY)
 
  64  * ehca (internal) qp state values
 
  77  * qp state transitions as defined by IB Arch Rel 1.1 page 431
 
  79 enum ib_qp_statetrans {
 
  91         IB_QPST_MAX     /* nr of transitions, this must be last!!! */
 
  95  * ib2ehca_qp_state maps IB to ehca qp_state
 
  96  * returns ehca qp state corresponding to given ib qp state
 
  98 static inline enum ehca_qp_state ib2ehca_qp_state(enum ib_qp_state ib_qp_state)
 
 100         switch (ib_qp_state) {
 
 102                 return EHCA_QPS_RESET;
 
 104                 return EHCA_QPS_INIT;
 
 116                 ehca_gen_err("invalid ib_qp_state=%x", ib_qp_state);
 
 122  * ehca2ib_qp_state maps ehca to IB qp_state
 
 123  * returns ib qp state corresponding to given ehca qp state
 
 125 static inline enum ib_qp_state ehca2ib_qp_state(enum ehca_qp_state
 
 128         switch (ehca_qp_state) {
 
 144                 ehca_gen_err("invalid ehca_qp_state=%x", ehca_qp_state);
 
 150  * ehca_qp_type used as index for req_attr and opt_attr of
 
 151  * struct ehca_modqp_statetrans
 
 162  * ib2ehcaqptype maps Ib to ehca qp_type
 
 163  * returns ehca qp type corresponding to ib qp type
 
 165 static inline enum ehca_qp_type ib2ehcaqptype(enum ib_qp_type ibqptype)
 
 178                 ehca_gen_err("Invalid ibqptype=%x", ibqptype);
 
 183 static inline enum ib_qp_statetrans get_modqp_statetrans(int ib_fromstate,
 
 187         switch (ib_tostate) {
 
 189                 index = IB_QPST_ANY2RESET;
 
 192                 switch (ib_fromstate) {
 
 194                         index = IB_QPST_RESET2INIT;
 
 197                         index = IB_QPST_INIT2INIT;
 
 202                 if (ib_fromstate == IB_QPS_INIT)
 
 203                         index = IB_QPST_INIT2RTR;
 
 206                 switch (ib_fromstate) {
 
 208                         index = IB_QPST_RTR2RTS;
 
 211                         index = IB_QPST_RTS2RTS;
 
 214                         index = IB_QPST_SQD2RTS;
 
 217                         index = IB_QPST_SQE2RTS;
 
 222                 if (ib_fromstate == IB_QPS_RTS)
 
 223                         index = IB_QPST_RTS2SQD;
 
 228                 index = IB_QPST_ANY2ERR;
 
 237  * ibqptype2servicetype returns hcp service type corresponding to given
 
 238  * ib qp type used by create_qp()
 
 240 static inline int ibqptype2servicetype(enum ib_qp_type ibqptype)
 
 252         case IB_QPT_RAW_IPV6:
 
 257                 ehca_gen_err("Invalid ibqptype=%x", ibqptype);
 
 263  * init userspace queue info from ipz_queue data
 
 265 static inline void queue2resp(struct ipzu_queue_resp *resp,
 
 266                               struct ipz_queue *queue)
 
 268         resp->qe_size = queue->qe_size;
 
 269         resp->act_nr_of_sg = queue->act_nr_of_sg;
 
 270         resp->queue_length = queue->queue_length;
 
 271         resp->pagesize = queue->pagesize;
 
 272         resp->toggle_state = queue->toggle_state;
 
 273         resp->offset = queue->offset;
 
 277  * init_qp_queue initializes/constructs r/squeue and registers queue pages.
 
 279 static inline int init_qp_queue(struct ehca_shca *shca,
 
 281                                 struct ehca_qp *my_qp,
 
 282                                 struct ipz_queue *queue,
 
 285                                 struct ehca_alloc_queue_parms *parms,
 
 288         int ret, cnt, ipz_rc, nr_q_pages;
 
 291         struct ib_device *ib_dev = &shca->ib_device;
 
 292         struct ipz_adapter_handle ipz_hca_handle = shca->ipz_hca_handle;
 
 294         if (!parms->queue_size)
 
 297         if (parms->is_small) {
 
 299                 ipz_rc = ipz_queue_ctor(pd, queue, nr_q_pages,
 
 300                                         128 << parms->page_size,
 
 301                                         wqe_size, parms->act_nr_sges, 1);
 
 303                 nr_q_pages = parms->queue_size;
 
 304                 ipz_rc = ipz_queue_ctor(pd, queue, nr_q_pages,
 
 305                                         EHCA_PAGESIZE, wqe_size,
 
 306                                         parms->act_nr_sges, 0);
 
 310                 ehca_err(ib_dev, "Cannot allocate page for queue. ipz_rc=%i",
 
 315         /* register queue pages */
 
 316         for (cnt = 0; cnt < nr_q_pages; cnt++) {
 
 317                 vpage = ipz_qpageit_get_inc(queue);
 
 319                         ehca_err(ib_dev, "ipz_qpageit_get_inc() "
 
 320                                  "failed p_vpage= %p", vpage);
 
 324                 rpage = virt_to_abs(vpage);
 
 326                 h_ret = hipz_h_register_rpage_qp(ipz_hca_handle,
 
 327                                                  my_qp->ipz_qp_handle,
 
 329                                                  rpage, parms->is_small ? 0 : 1,
 
 330                                                  my_qp->galpas.kernel);
 
 331                 if (cnt == (nr_q_pages - 1)) {  /* last page! */
 
 332                         if (h_ret != expected_hret) {
 
 333                                 ehca_err(ib_dev, "hipz_qp_register_rpage() "
 
 335                                 ret = ehca2ib_return_code(h_ret);
 
 338                         vpage = ipz_qpageit_get_inc(&my_qp->ipz_rqueue);
 
 340                                 ehca_err(ib_dev, "ipz_qpageit_get_inc() "
 
 341                                          "should not succeed vpage=%p", vpage);
 
 346                         if (h_ret != H_PAGE_REGISTERED) {
 
 347                                 ehca_err(ib_dev, "hipz_qp_register_rpage() "
 
 349                                 ret = ehca2ib_return_code(h_ret);
 
 355         ipz_qeit_reset(queue);
 
 360         ipz_queue_dtor(pd, queue);
 
 364 static inline int ehca_calc_wqe_size(int act_nr_sge, int is_llqp)
 
 367                 return 128 << act_nr_sge;
 
 369                 return offsetof(struct ehca_wqe,
 
 370                                 u.nud.sg_list[act_nr_sge]);
 
 373 static void ehca_determine_small_queue(struct ehca_alloc_queue_parms *queue,
 
 374                                        int req_nr_sge, int is_llqp)
 
 376         u32 wqe_size, q_size;
 
 377         int act_nr_sge = req_nr_sge;
 
 380                 /* round up #SGEs so WQE size is a power of 2 */
 
 381                 for (act_nr_sge = 4; act_nr_sge <= 252;
 
 382                      act_nr_sge = 4 + 2 * act_nr_sge)
 
 383                         if (act_nr_sge >= req_nr_sge)
 
 386         wqe_size = ehca_calc_wqe_size(act_nr_sge, is_llqp);
 
 387         q_size = wqe_size * (queue->max_wr + 1);
 
 390                 queue->page_size = 2;
 
 391         else if (q_size <= 1024)
 
 392                 queue->page_size = 3;
 
 394                 queue->page_size = 0;
 
 396         queue->is_small = (queue->page_size != 0);
 
 399 /* needs to be called with cq->spinlock held */
 
 400 void ehca_add_to_err_list(struct ehca_qp *qp, int on_sq)
 
 402         struct list_head *list, *node;
 
 404         /* TODO: support low latency QPs */
 
 405         if (qp->ext_type == EQPT_LLQP)
 
 409                 list = &qp->send_cq->sqp_err_list;
 
 410                 node = &qp->sq_err_node;
 
 412                 list = &qp->recv_cq->rqp_err_list;
 
 413                 node = &qp->rq_err_node;
 
 416         if (list_empty(node))
 
 417                 list_add_tail(node, list);
 
 422 static void del_from_err_list(struct ehca_cq *cq, struct list_head *node)
 
 426         spin_lock_irqsave(&cq->spinlock, flags);
 
 428         if (!list_empty(node))
 
 431         spin_unlock_irqrestore(&cq->spinlock, flags);
 
 434 static void reset_queue_map(struct ehca_queue_map *qmap)
 
 438         qmap->tail = qmap->entries - 1;
 
 439         qmap->left_to_poll = 0;
 
 440         qmap->next_wqe_idx = 0;
 
 441         for (i = 0; i < qmap->entries; i++) {
 
 442                 qmap->map[i].reported = 1;
 
 443                 qmap->map[i].cqe_req = 0;
 
 448  * Create an ib_qp struct that is either a QP or an SRQ, depending on
 
 449  * the value of the is_srq parameter. If init_attr and srq_init_attr share
 
 450  * fields, the field out of init_attr is used.
 
 452 static struct ehca_qp *internal_create_qp(
 
 454         struct ib_qp_init_attr *init_attr,
 
 455         struct ib_srq_init_attr *srq_init_attr,
 
 456         struct ib_udata *udata, int is_srq)
 
 458         struct ehca_qp *my_qp, *my_srq = NULL;
 
 459         struct ehca_pd *my_pd = container_of(pd, struct ehca_pd, ib_pd);
 
 460         struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
 
 462         struct ib_ucontext *context = NULL;
 
 464         int is_llqp = 0, has_srq = 0;
 
 465         int qp_type, max_send_sge, max_recv_sge, ret;
 
 467         /* h_call's out parameters */
 
 468         struct ehca_alloc_qp_parms parms;
 
 469         u32 swqe_size = 0, rwqe_size = 0, ib_qp_num;
 
 472         if (!atomic_add_unless(&shca->num_qps, 1, shca->max_num_qps)) {
 
 473                 ehca_err(pd->device, "Unable to create QP, max number of %i "
 
 474                          "QPs reached.", shca->max_num_qps);
 
 475                 ehca_err(pd->device, "To increase the maximum number of QPs "
 
 476                          "use the number_of_qps module parameter.\n");
 
 477                 return ERR_PTR(-ENOSPC);
 
 480         if (init_attr->create_flags) {
 
 481                 atomic_dec(&shca->num_qps);
 
 482                 return ERR_PTR(-EINVAL);
 
 485         memset(&parms, 0, sizeof(parms));
 
 486         qp_type = init_attr->qp_type;
 
 488         if (init_attr->sq_sig_type != IB_SIGNAL_REQ_WR &&
 
 489                 init_attr->sq_sig_type != IB_SIGNAL_ALL_WR) {
 
 490                 ehca_err(pd->device, "init_attr->sg_sig_type=%x not allowed",
 
 491                          init_attr->sq_sig_type);
 
 492                 atomic_dec(&shca->num_qps);
 
 493                 return ERR_PTR(-EINVAL);
 
 497         if (qp_type & 0x80) {
 
 499                 parms.ext_type = EQPT_LLQP;
 
 500                 parms.ll_comp_flags = qp_type & LLQP_COMP_MASK;
 
 503         init_attr->qp_type &= 0x1F;
 
 505         /* handle SRQ base QPs */
 
 506         if (init_attr->srq) {
 
 507                 my_srq = container_of(init_attr->srq, struct ehca_qp, ib_srq);
 
 509                 if (qp_type == IB_QPT_UC) {
 
 510                         ehca_err(pd->device, "UC with SRQ not supported");
 
 511                         atomic_dec(&shca->num_qps);
 
 512                         return ERR_PTR(-EINVAL);
 
 516                 parms.ext_type = EQPT_SRQBASE;
 
 517                 parms.srq_qpn = my_srq->real_qp_num;
 
 520         if (is_llqp && has_srq) {
 
 521                 ehca_err(pd->device, "LLQPs can't have an SRQ");
 
 522                 atomic_dec(&shca->num_qps);
 
 523                 return ERR_PTR(-EINVAL);
 
 528                 parms.ext_type = EQPT_SRQ;
 
 529                 parms.srq_limit = srq_init_attr->attr.srq_limit;
 
 530                 if (init_attr->cap.max_recv_sge > 3) {
 
 531                         ehca_err(pd->device, "no more than three SGEs "
 
 532                                  "supported for SRQ  pd=%p  max_sge=%x",
 
 533                                  pd, init_attr->cap.max_recv_sge);
 
 534                         atomic_dec(&shca->num_qps);
 
 535                         return ERR_PTR(-EINVAL);
 
 540         if (qp_type != IB_QPT_UD &&
 
 541             qp_type != IB_QPT_UC &&
 
 542             qp_type != IB_QPT_RC &&
 
 543             qp_type != IB_QPT_SMI &&
 
 544             qp_type != IB_QPT_GSI) {
 
 545                 ehca_err(pd->device, "wrong QP Type=%x", qp_type);
 
 546                 atomic_dec(&shca->num_qps);
 
 547                 return ERR_PTR(-EINVAL);
 
 553                         if ((init_attr->cap.max_send_wr > 255) ||
 
 554                             (init_attr->cap.max_recv_wr > 255)) {
 
 556                                          "Invalid Number of max_sq_wr=%x "
 
 557                                          "or max_rq_wr=%x for RC LLQP",
 
 558                                          init_attr->cap.max_send_wr,
 
 559                                          init_attr->cap.max_recv_wr);
 
 560                                 atomic_dec(&shca->num_qps);
 
 561                                 return ERR_PTR(-EINVAL);
 
 565                         if (!EHCA_BMASK_GET(HCA_CAP_UD_LL_QP, shca->hca_cap)) {
 
 566                                 ehca_err(pd->device, "UD LLQP not supported "
 
 568                                 atomic_dec(&shca->num_qps);
 
 569                                 return ERR_PTR(-ENOSYS);
 
 571                         if (!(init_attr->cap.max_send_sge <= 5
 
 572                             && init_attr->cap.max_send_sge >= 1
 
 573                             && init_attr->cap.max_recv_sge <= 5
 
 574                             && init_attr->cap.max_recv_sge >= 1)) {
 
 576                                          "Invalid Number of max_send_sge=%x "
 
 577                                          "or max_recv_sge=%x for UD LLQP",
 
 578                                          init_attr->cap.max_send_sge,
 
 579                                          init_attr->cap.max_recv_sge);
 
 580                                 atomic_dec(&shca->num_qps);
 
 581                                 return ERR_PTR(-EINVAL);
 
 582                         } else if (init_attr->cap.max_send_wr > 255) {
 
 585                                          "max_send_wr=%x for UD QP_TYPE=%x",
 
 586                                          init_attr->cap.max_send_wr, qp_type);
 
 587                                 atomic_dec(&shca->num_qps);
 
 588                                 return ERR_PTR(-EINVAL);
 
 592                         ehca_err(pd->device, "unsupported LL QP Type=%x",
 
 594                         atomic_dec(&shca->num_qps);
 
 595                         return ERR_PTR(-EINVAL);
 
 598                 int max_sge = (qp_type == IB_QPT_UD || qp_type == IB_QPT_SMI
 
 599                                || qp_type == IB_QPT_GSI) ? 250 : 252;
 
 601                 if (init_attr->cap.max_send_sge > max_sge
 
 602                     || init_attr->cap.max_recv_sge > max_sge) {
 
 603                         ehca_err(pd->device, "Invalid number of SGEs requested "
 
 604                                  "send_sge=%x recv_sge=%x max_sge=%x",
 
 605                                  init_attr->cap.max_send_sge,
 
 606                                  init_attr->cap.max_recv_sge, max_sge);
 
 607                         atomic_dec(&shca->num_qps);
 
 608                         return ERR_PTR(-EINVAL);
 
 612         if (pd->uobject && udata)
 
 613                 context = pd->uobject->context;
 
 615         my_qp = kmem_cache_zalloc(qp_cache, GFP_KERNEL);
 
 617                 ehca_err(pd->device, "pd=%p not enough memory to alloc qp", pd);
 
 618                 atomic_dec(&shca->num_qps);
 
 619                 return ERR_PTR(-ENOMEM);
 
 622         atomic_set(&my_qp->nr_events, 0);
 
 623         init_waitqueue_head(&my_qp->wait_completion);
 
 624         spin_lock_init(&my_qp->spinlock_s);
 
 625         spin_lock_init(&my_qp->spinlock_r);
 
 626         my_qp->qp_type = qp_type;
 
 627         my_qp->ext_type = parms.ext_type;
 
 628         my_qp->state = IB_QPS_RESET;
 
 630         if (init_attr->recv_cq)
 
 632                         container_of(init_attr->recv_cq, struct ehca_cq, ib_cq);
 
 633         if (init_attr->send_cq)
 
 635                         container_of(init_attr->send_cq, struct ehca_cq, ib_cq);
 
 638                 if (!idr_pre_get(&ehca_qp_idr, GFP_KERNEL)) {
 
 640                         ehca_err(pd->device, "Can't reserve idr resources.");
 
 641                         goto create_qp_exit0;
 
 644                 write_lock_irqsave(&ehca_qp_idr_lock, flags);
 
 645                 ret = idr_get_new(&ehca_qp_idr, my_qp, &my_qp->token);
 
 646                 write_unlock_irqrestore(&ehca_qp_idr_lock, flags);
 
 647         } while (ret == -EAGAIN);
 
 651                 ehca_err(pd->device, "Can't allocate new idr entry.");
 
 652                 goto create_qp_exit0;
 
 655         if (my_qp->token > 0x1FFFFFF) {
 
 657                 ehca_err(pd->device, "Invalid number of qp");
 
 658                 goto create_qp_exit1;
 
 662                 parms.srq_token = my_qp->token;
 
 664         parms.servicetype = ibqptype2servicetype(qp_type);
 
 665         if (parms.servicetype < 0) {
 
 667                 ehca_err(pd->device, "Invalid qp_type=%x", qp_type);
 
 668                 goto create_qp_exit1;
 
 671         /* Always signal by WQE so we can hide circ. WQEs */
 
 672         parms.sigtype = HCALL_SIGT_BY_WQE;
 
 674         /* UD_AV CIRCUMVENTION */
 
 675         max_send_sge = init_attr->cap.max_send_sge;
 
 676         max_recv_sge = init_attr->cap.max_recv_sge;
 
 677         if (parms.servicetype == ST_UD && !is_llqp) {
 
 682         parms.token = my_qp->token;
 
 683         parms.eq_handle = shca->eq.ipz_eq_handle;
 
 684         parms.pd = my_pd->fw_pd;
 
 686                 parms.send_cq_handle = my_qp->send_cq->ipz_cq_handle;
 
 688                 parms.recv_cq_handle = my_qp->recv_cq->ipz_cq_handle;
 
 690         parms.squeue.max_wr = init_attr->cap.max_send_wr;
 
 691         parms.rqueue.max_wr = init_attr->cap.max_recv_wr;
 
 692         parms.squeue.max_sge = max_send_sge;
 
 693         parms.rqueue.max_sge = max_recv_sge;
 
 695         /* RC QPs need one more SWQE for unsolicited ack circumvention */
 
 696         if (qp_type == IB_QPT_RC)
 
 697                 parms.squeue.max_wr++;
 
 699         if (EHCA_BMASK_GET(HCA_CAP_MINI_QP, shca->hca_cap)) {
 
 701                         ehca_determine_small_queue(
 
 702                                 &parms.squeue, max_send_sge, is_llqp);
 
 704                         ehca_determine_small_queue(
 
 705                                 &parms.rqueue, max_recv_sge, is_llqp);
 
 707                         (parms.squeue.is_small || parms.rqueue.is_small);
 
 710         h_ret = hipz_h_alloc_resource_qp(shca->ipz_hca_handle, &parms);
 
 711         if (h_ret != H_SUCCESS) {
 
 712                 ehca_err(pd->device, "h_alloc_resource_qp() failed h_ret=%li",
 
 714                 ret = ehca2ib_return_code(h_ret);
 
 715                 goto create_qp_exit1;
 
 718         ib_qp_num = my_qp->real_qp_num = parms.real_qp_num;
 
 719         my_qp->ipz_qp_handle = parms.qp_handle;
 
 720         my_qp->galpas = parms.galpas;
 
 722         swqe_size = ehca_calc_wqe_size(parms.squeue.act_nr_sges, is_llqp);
 
 723         rwqe_size = ehca_calc_wqe_size(parms.rqueue.act_nr_sges, is_llqp);
 
 728                         parms.squeue.act_nr_sges = 1;
 
 729                         parms.rqueue.act_nr_sges = 1;
 
 731                 /* hide the extra WQE */
 
 732                 parms.squeue.act_nr_wqes--;
 
 737                 /* UD circumvention */
 
 739                         parms.squeue.act_nr_sges = 1;
 
 740                         parms.rqueue.act_nr_sges = 1;
 
 742                         parms.squeue.act_nr_sges -= 2;
 
 743                         parms.rqueue.act_nr_sges -= 2;
 
 746                 if (IB_QPT_GSI == qp_type || IB_QPT_SMI == qp_type) {
 
 747                         parms.squeue.act_nr_wqes = init_attr->cap.max_send_wr;
 
 748                         parms.rqueue.act_nr_wqes = init_attr->cap.max_recv_wr;
 
 749                         parms.squeue.act_nr_sges = init_attr->cap.max_send_sge;
 
 750                         parms.rqueue.act_nr_sges = init_attr->cap.max_recv_sge;
 
 751                         ib_qp_num = (qp_type == IB_QPT_SMI) ? 0 : 1;
 
 760         /* initialize r/squeue and register queue pages */
 
 763                         shca, my_pd, my_qp, &my_qp->ipz_squeue, 0,
 
 764                         HAS_RQ(my_qp) ? H_PAGE_REGISTERED : H_SUCCESS,
 
 765                         &parms.squeue, swqe_size);
 
 767                         ehca_err(pd->device, "Couldn't initialize squeue "
 
 768                                  "and pages ret=%i", ret);
 
 769                         goto create_qp_exit2;
 
 772                 my_qp->sq_map.entries = my_qp->ipz_squeue.queue_length /
 
 773                          my_qp->ipz_squeue.qe_size;
 
 774                 my_qp->sq_map.map = vmalloc(my_qp->sq_map.entries *
 
 775                                         sizeof(struct ehca_qmap_entry));
 
 776                 if (!my_qp->sq_map.map) {
 
 777                         ehca_err(pd->device, "Couldn't allocate squeue "
 
 779                         goto create_qp_exit3;
 
 781                 INIT_LIST_HEAD(&my_qp->sq_err_node);
 
 782                 /* to avoid the generation of bogus flush CQEs */
 
 783                 reset_queue_map(&my_qp->sq_map);
 
 788                         shca, my_pd, my_qp, &my_qp->ipz_rqueue, 1,
 
 789                         H_SUCCESS, &parms.rqueue, rwqe_size);
 
 791                         ehca_err(pd->device, "Couldn't initialize rqueue "
 
 792                                  "and pages ret=%i", ret);
 
 793                         goto create_qp_exit4;
 
 796                 my_qp->rq_map.entries = my_qp->ipz_rqueue.queue_length /
 
 797                         my_qp->ipz_rqueue.qe_size;
 
 798                 my_qp->rq_map.map = vmalloc(my_qp->rq_map.entries *
 
 799                                 sizeof(struct ehca_qmap_entry));
 
 800                 if (!my_qp->rq_map.map) {
 
 801                         ehca_err(pd->device, "Couldn't allocate squeue "
 
 803                         goto create_qp_exit5;
 
 805                 INIT_LIST_HEAD(&my_qp->rq_err_node);
 
 806                 /* to avoid the generation of bogus flush CQEs */
 
 807                 reset_queue_map(&my_qp->rq_map);
 
 808         } else if (init_attr->srq) {
 
 809                 /* this is a base QP, use the queue map of the SRQ */
 
 810                 my_qp->rq_map = my_srq->rq_map;
 
 811                 INIT_LIST_HEAD(&my_qp->rq_err_node);
 
 813                 my_qp->ipz_rqueue = my_srq->ipz_rqueue;
 
 817                 my_qp->ib_srq.pd = &my_pd->ib_pd;
 
 818                 my_qp->ib_srq.device = my_pd->ib_pd.device;
 
 820                 my_qp->ib_srq.srq_context = init_attr->qp_context;
 
 821                 my_qp->ib_srq.event_handler = init_attr->event_handler;
 
 823                 my_qp->ib_qp.qp_num = ib_qp_num;
 
 824                 my_qp->ib_qp.pd = &my_pd->ib_pd;
 
 825                 my_qp->ib_qp.device = my_pd->ib_pd.device;
 
 827                 my_qp->ib_qp.recv_cq = init_attr->recv_cq;
 
 828                 my_qp->ib_qp.send_cq = init_attr->send_cq;
 
 830                 my_qp->ib_qp.qp_type = qp_type;
 
 831                 my_qp->ib_qp.srq = init_attr->srq;
 
 833                 my_qp->ib_qp.qp_context = init_attr->qp_context;
 
 834                 my_qp->ib_qp.event_handler = init_attr->event_handler;
 
 837         init_attr->cap.max_inline_data = 0; /* not supported yet */
 
 838         init_attr->cap.max_recv_sge = parms.rqueue.act_nr_sges;
 
 839         init_attr->cap.max_recv_wr = parms.rqueue.act_nr_wqes;
 
 840         init_attr->cap.max_send_sge = parms.squeue.act_nr_sges;
 
 841         init_attr->cap.max_send_wr = parms.squeue.act_nr_wqes;
 
 842         my_qp->init_attr = *init_attr;
 
 844         if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
 
 845                 shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
 
 847                 if (ehca_nr_ports < 0) {
 
 848                         /* alloc array to cache subsequent modify qp parms
 
 849                          * for autodetect mode
 
 852                                 kzalloc(EHCA_MOD_QP_PARM_MAX *
 
 853                                         sizeof(*my_qp->mod_qp_parm),
 
 855                         if (!my_qp->mod_qp_parm) {
 
 857                                          "Could not alloc mod_qp_parm");
 
 858                                 goto create_qp_exit5;
 
 863         /* NOTE: define_apq0() not supported yet */
 
 864         if (qp_type == IB_QPT_GSI) {
 
 865                 h_ret = ehca_define_sqp(shca, my_qp, init_attr);
 
 866                 if (h_ret != H_SUCCESS) {
 
 867                         kfree(my_qp->mod_qp_parm);
 
 868                         my_qp->mod_qp_parm = NULL;
 
 869                         /* the QP pointer is no longer valid */
 
 870                         shca->sport[init_attr->port_num - 1].ibqp_sqp[qp_type] =
 
 872                         ret = ehca2ib_return_code(h_ret);
 
 873                         goto create_qp_exit6;
 
 877         if (my_qp->send_cq) {
 
 878                 ret = ehca_cq_assign_qp(my_qp->send_cq, my_qp);
 
 881                                  "Couldn't assign qp to send_cq ret=%i", ret);
 
 882                         goto create_qp_exit7;
 
 886         /* copy queues, galpa data to user space */
 
 887         if (context && udata) {
 
 888                 struct ehca_create_qp_resp resp;
 
 889                 memset(&resp, 0, sizeof(resp));
 
 891                 resp.qp_num = my_qp->real_qp_num;
 
 892                 resp.token = my_qp->token;
 
 893                 resp.qp_type = my_qp->qp_type;
 
 894                 resp.ext_type = my_qp->ext_type;
 
 895                 resp.qkey = my_qp->qkey;
 
 896                 resp.real_qp_num = my_qp->real_qp_num;
 
 899                         queue2resp(&resp.ipz_squeue, &my_qp->ipz_squeue);
 
 901                         queue2resp(&resp.ipz_rqueue, &my_qp->ipz_rqueue);
 
 902                 resp.fw_handle_ofs = (u32)
 
 903                         (my_qp->galpas.user.fw_handle & (PAGE_SIZE - 1));
 
 905                 if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
 
 906                         ehca_err(pd->device, "Copy to udata failed");
 
 908                         goto create_qp_exit8;
 
 915         ehca_cq_unassign_qp(my_qp->send_cq, my_qp->real_qp_num);
 
 918         kfree(my_qp->mod_qp_parm);
 
 922                 vfree(my_qp->rq_map.map);
 
 926                 ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
 930                 vfree(my_qp->sq_map.map);
 
 934                 ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
 
 937         hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
 
 940         write_lock_irqsave(&ehca_qp_idr_lock, flags);
 
 941         idr_remove(&ehca_qp_idr, my_qp->token);
 
 942         write_unlock_irqrestore(&ehca_qp_idr_lock, flags);
 
 945         kmem_cache_free(qp_cache, my_qp);
 
 946         atomic_dec(&shca->num_qps);
 
 950 struct ib_qp *ehca_create_qp(struct ib_pd *pd,
 
 951                              struct ib_qp_init_attr *qp_init_attr,
 
 952                              struct ib_udata *udata)
 
 956         ret = internal_create_qp(pd, qp_init_attr, NULL, udata, 0);
 
 957         return IS_ERR(ret) ? (struct ib_qp *)ret : &ret->ib_qp;
 
 960 static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
 961                                struct ib_uobject *uobject);
 
 963 struct ib_srq *ehca_create_srq(struct ib_pd *pd,
 
 964                                struct ib_srq_init_attr *srq_init_attr,
 
 965                                struct ib_udata *udata)
 
 967         struct ib_qp_init_attr qp_init_attr;
 
 968         struct ehca_qp *my_qp;
 
 970         struct ehca_shca *shca = container_of(pd->device, struct ehca_shca,
 
 972         struct hcp_modify_qp_control_block *mqpcb;
 
 973         u64 hret, update_mask;
 
 975         /* For common attributes, internal_create_qp() takes its info
 
 976          * out of qp_init_attr, so copy all common attrs there.
 
 978         memset(&qp_init_attr, 0, sizeof(qp_init_attr));
 
 979         qp_init_attr.event_handler = srq_init_attr->event_handler;
 
 980         qp_init_attr.qp_context = srq_init_attr->srq_context;
 
 981         qp_init_attr.sq_sig_type = IB_SIGNAL_ALL_WR;
 
 982         qp_init_attr.qp_type = IB_QPT_RC;
 
 983         qp_init_attr.cap.max_recv_wr = srq_init_attr->attr.max_wr;
 
 984         qp_init_attr.cap.max_recv_sge = srq_init_attr->attr.max_sge;
 
 986         my_qp = internal_create_qp(pd, &qp_init_attr, srq_init_attr, udata, 1);
 
 988                 return (struct ib_srq *)my_qp;
 
 990         /* copy back return values */
 
 991         srq_init_attr->attr.max_wr = qp_init_attr.cap.max_recv_wr;
 
 992         srq_init_attr->attr.max_sge = 3;
 
 994         /* drive SRQ into RTR state */
 
 995         mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
 
 997                 ehca_err(pd->device, "Could not get zeroed page for mqpcb "
 
 998                          "ehca_qp=%p qp_num=%x ", my_qp, my_qp->real_qp_num);
 
 999                 ret = ERR_PTR(-ENOMEM);
 
1003         mqpcb->qp_state = EHCA_QPS_INIT;
 
1004         mqpcb->prim_phys_port = 1;
 
1005         update_mask = EHCA_BMASK_SET(MQPCB_MASK_QP_STATE, 1);
 
1006         hret = hipz_h_modify_qp(shca->ipz_hca_handle,
 
1007                                 my_qp->ipz_qp_handle,
 
1010                                 mqpcb, my_qp->galpas.kernel);
 
1011         if (hret != H_SUCCESS) {
 
1012                 ehca_err(pd->device, "Could not modify SRQ to INIT "
 
1013                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
1014                          my_qp, my_qp->real_qp_num, hret);
 
1018         mqpcb->qp_enable = 1;
 
1019         update_mask = EHCA_BMASK_SET(MQPCB_MASK_QP_ENABLE, 1);
 
1020         hret = hipz_h_modify_qp(shca->ipz_hca_handle,
 
1021                                 my_qp->ipz_qp_handle,
 
1024                                 mqpcb, my_qp->galpas.kernel);
 
1025         if (hret != H_SUCCESS) {
 
1026                 ehca_err(pd->device, "Could not enable SRQ "
 
1027                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
1028                          my_qp, my_qp->real_qp_num, hret);
 
1032         mqpcb->qp_state  = EHCA_QPS_RTR;
 
1033         update_mask = EHCA_BMASK_SET(MQPCB_MASK_QP_STATE, 1);
 
1034         hret = hipz_h_modify_qp(shca->ipz_hca_handle,
 
1035                                 my_qp->ipz_qp_handle,
 
1038                                 mqpcb, my_qp->galpas.kernel);
 
1039         if (hret != H_SUCCESS) {
 
1040                 ehca_err(pd->device, "Could not modify SRQ to RTR "
 
1041                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
1042                          my_qp, my_qp->real_qp_num, hret);
 
1046         ehca_free_fw_ctrlblock(mqpcb);
 
1048         return &my_qp->ib_srq;
 
1051         ret = ERR_PTR(ehca2ib_return_code(hret));
 
1052         ehca_free_fw_ctrlblock(mqpcb);
 
1055         internal_destroy_qp(pd->device, my_qp, my_qp->ib_srq.uobject);
 
1061  * prepare_sqe_rts called by internal_modify_qp() at trans sqe -> rts
 
1062  * set purge bit of bad wqe and subsequent wqes to avoid reentering sqe
 
1063  * returns total number of bad wqes in bad_wqe_cnt
 
1065 static int prepare_sqe_rts(struct ehca_qp *my_qp, struct ehca_shca *shca,
 
1069         struct ipz_queue *squeue;
 
1070         void *bad_send_wqe_p, *bad_send_wqe_v;
 
1072         struct ehca_wqe *wqe;
 
1073         int qp_num = my_qp->ib_qp.qp_num;
 
1075         /* get send wqe pointer */
 
1076         h_ret = hipz_h_disable_and_get_wqe(shca->ipz_hca_handle,
 
1077                                            my_qp->ipz_qp_handle, &my_qp->pf,
 
1078                                            &bad_send_wqe_p, NULL, 2);
 
1079         if (h_ret != H_SUCCESS) {
 
1080                 ehca_err(&shca->ib_device, "hipz_h_disable_and_get_wqe() failed"
 
1081                          " ehca_qp=%p qp_num=%x h_ret=%li",
 
1082                          my_qp, qp_num, h_ret);
 
1083                 return ehca2ib_return_code(h_ret);
 
1085         bad_send_wqe_p = (void *)((u64)bad_send_wqe_p & (~(1L << 63)));
 
1086         ehca_dbg(&shca->ib_device, "qp_num=%x bad_send_wqe_p=%p",
 
1087                  qp_num, bad_send_wqe_p);
 
1088         /* convert wqe pointer to vadr */
 
1089         bad_send_wqe_v = abs_to_virt((u64)bad_send_wqe_p);
 
1090         if (ehca_debug_level >= 2)
 
1091                 ehca_dmp(bad_send_wqe_v, 32, "qp_num=%x bad_wqe", qp_num);
 
1092         squeue = &my_qp->ipz_squeue;
 
1093         if (ipz_queue_abs_to_offset(squeue, (u64)bad_send_wqe_p, &q_ofs)) {
 
1094                 ehca_err(&shca->ib_device, "failed to get wqe offset qp_num=%x"
 
1095                          " bad_send_wqe_p=%p", qp_num, bad_send_wqe_p);
 
1099         /* loop sets wqe's purge bit */
 
1100         wqe = (struct ehca_wqe *)ipz_qeit_calc(squeue, q_ofs);
 
1102         while (wqe->optype != 0xff && wqe->wqef != 0xff) {
 
1103                 if (ehca_debug_level >= 2)
 
1104                         ehca_dmp(wqe, 32, "qp_num=%x wqe", qp_num);
 
1105                 wqe->nr_of_data_seg = 0; /* suppress data access */
 
1106                 wqe->wqef = WQEF_PURGE; /* WQE to be purged */
 
1107                 q_ofs = ipz_queue_advance_offset(squeue, q_ofs);
 
1108                 wqe = (struct ehca_wqe *)ipz_qeit_calc(squeue, q_ofs);
 
1109                 *bad_wqe_cnt = (*bad_wqe_cnt)+1;
 
1112          * bad wqe will be reprocessed and ignored when pol_cq() is called,
 
1113          *  i.e. nr of wqes with flush error status is one less
 
1115         ehca_dbg(&shca->ib_device, "qp_num=%x flusherr_wqe_cnt=%x",
 
1116                  qp_num, (*bad_wqe_cnt)-1);
 
1122 static int calc_left_cqes(u64 wqe_p, struct ipz_queue *ipz_queue,
 
1123                           struct ehca_queue_map *qmap)
 
1128         unsigned int tail_idx;
 
1130         /* convert real to abs address */
 
1131         wqe_p = wqe_p & (~(1UL << 63));
 
1133         wqe_v = abs_to_virt(wqe_p);
 
1135         if (ipz_queue_abs_to_offset(ipz_queue, wqe_p, &q_ofs)) {
 
1136                 ehca_gen_err("Invalid offset for calculating left cqes "
 
1137                                 "wqe_p=%#lx wqe_v=%p\n", wqe_p, wqe_v);
 
1141         tail_idx = (qmap->tail + 1) % qmap->entries;
 
1142         wqe_idx = q_ofs / ipz_queue->qe_size;
 
1144         /* check all processed wqes, whether a cqe is requested or not */
 
1145         while (tail_idx != wqe_idx) {
 
1146                 if (qmap->map[tail_idx].cqe_req)
 
1147                         qmap->left_to_poll++;
 
1148                 tail_idx = (tail_idx + 1) % qmap->entries;
 
1150         /* save index in queue, where we have to start flushing */
 
1151         qmap->next_wqe_idx = wqe_idx;
 
1155 static int check_for_left_cqes(struct ehca_qp *my_qp, struct ehca_shca *shca)
 
1158         void *send_wqe_p, *recv_wqe_p;
 
1160         unsigned long flags;
 
1161         int qp_num = my_qp->ib_qp.qp_num;
 
1163         /* this hcall is not supported on base QPs */
 
1164         if (my_qp->ext_type != EQPT_SRQBASE) {
 
1165                 /* get send and receive wqe pointer */
 
1166                 h_ret = hipz_h_disable_and_get_wqe(shca->ipz_hca_handle,
 
1167                                 my_qp->ipz_qp_handle, &my_qp->pf,
 
1168                                 &send_wqe_p, &recv_wqe_p, 4);
 
1169                 if (h_ret != H_SUCCESS) {
 
1170                         ehca_err(&shca->ib_device, "disable_and_get_wqe() "
 
1171                                  "failed ehca_qp=%p qp_num=%x h_ret=%li",
 
1172                                  my_qp, qp_num, h_ret);
 
1173                         return ehca2ib_return_code(h_ret);
 
1177                  * acquire lock to ensure that nobody is polling the cq which
 
1178                  * could mean that the qmap->tail pointer is in an
 
1179                  * inconsistent state.
 
1181                 spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
 
1182                 ret = calc_left_cqes((u64)send_wqe_p, &my_qp->ipz_squeue,
 
1184                 spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
 
1189                 spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
 
1190                 ret = calc_left_cqes((u64)recv_wqe_p, &my_qp->ipz_rqueue,
 
1192                 spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
 
1196                 spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
 
1197                 my_qp->sq_map.left_to_poll = 0;
 
1198                 my_qp->sq_map.next_wqe_idx = (my_qp->sq_map.tail + 1) %
 
1199                                                 my_qp->sq_map.entries;
 
1200                 spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
 
1202                 spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
 
1203                 my_qp->rq_map.left_to_poll = 0;
 
1204                 my_qp->rq_map.next_wqe_idx = (my_qp->rq_map.tail + 1) %
 
1205                                                 my_qp->rq_map.entries;
 
1206                 spin_unlock_irqrestore(&my_qp->recv_cq->spinlock, flags);
 
1209         /* this assures flush cqes being generated only for pending wqes */
 
1210         if ((my_qp->sq_map.left_to_poll == 0) &&
 
1211                                 (my_qp->rq_map.left_to_poll == 0)) {
 
1212                 spin_lock_irqsave(&my_qp->send_cq->spinlock, flags);
 
1213                 ehca_add_to_err_list(my_qp, 1);
 
1214                 spin_unlock_irqrestore(&my_qp->send_cq->spinlock, flags);
 
1216                 if (HAS_RQ(my_qp)) {
 
1217                         spin_lock_irqsave(&my_qp->recv_cq->spinlock, flags);
 
1218                         ehca_add_to_err_list(my_qp, 0);
 
1219                         spin_unlock_irqrestore(&my_qp->recv_cq->spinlock,
 
1228  * internal_modify_qp with circumvention to handle aqp0 properly
 
1229  * smi_reset2init indicates if this is an internal reset-to-init-call for
 
1230  * smi. This flag must always be zero if called from ehca_modify_qp()!
 
1231  * This internal func was intorduced to avoid recursion of ehca_modify_qp()!
 
1233 static int internal_modify_qp(struct ib_qp *ibqp,
 
1234                               struct ib_qp_attr *attr,
 
1235                               int attr_mask, int smi_reset2init)
 
1237         enum ib_qp_state qp_cur_state, qp_new_state;
 
1238         int cnt, qp_attr_idx, ret = 0;
 
1239         enum ib_qp_statetrans statetrans;
 
1240         struct hcp_modify_qp_control_block *mqpcb;
 
1241         struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
 
1242         struct ehca_shca *shca =
 
1243                 container_of(ibqp->pd->device, struct ehca_shca, ib_device);
 
1246         int bad_wqe_cnt = 0;
 
1247         int squeue_locked = 0;
 
1248         unsigned long flags = 0;
 
1250         /* do query_qp to obtain current attr values */
 
1251         mqpcb = ehca_alloc_fw_ctrlblock(GFP_ATOMIC);
 
1253                 ehca_err(ibqp->device, "Could not get zeroed page for mqpcb "
 
1254                          "ehca_qp=%p qp_num=%x ", my_qp, ibqp->qp_num);
 
1258         h_ret = hipz_h_query_qp(shca->ipz_hca_handle,
 
1259                                 my_qp->ipz_qp_handle,
 
1261                                 mqpcb, my_qp->galpas.kernel);
 
1262         if (h_ret != H_SUCCESS) {
 
1263                 ehca_err(ibqp->device, "hipz_h_query_qp() failed "
 
1264                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
1265                          my_qp, ibqp->qp_num, h_ret);
 
1266                 ret = ehca2ib_return_code(h_ret);
 
1267                 goto modify_qp_exit1;
 
1270         qp_cur_state = ehca2ib_qp_state(mqpcb->qp_state);
 
1272         if (qp_cur_state == -EINVAL) {  /* invalid qp state */
 
1274                 ehca_err(ibqp->device, "Invalid current ehca_qp_state=%x "
 
1275                          "ehca_qp=%p qp_num=%x",
 
1276                          mqpcb->qp_state, my_qp, ibqp->qp_num);
 
1277                 goto modify_qp_exit1;
 
1280          * circumvention to set aqp0 initial state to init
 
1281          * as expected by IB spec
 
1283         if (smi_reset2init == 0 &&
 
1284             ibqp->qp_type == IB_QPT_SMI &&
 
1285             qp_cur_state == IB_QPS_RESET &&
 
1286             (attr_mask & IB_QP_STATE) &&
 
1287             attr->qp_state == IB_QPS_INIT) { /* RESET -> INIT */
 
1288                 struct ib_qp_attr smiqp_attr = {
 
1289                         .qp_state = IB_QPS_INIT,
 
1290                         .port_num = my_qp->init_attr.port_num,
 
1294                 int smiqp_attr_mask = IB_QP_STATE | IB_QP_PORT |
 
1295                         IB_QP_PKEY_INDEX | IB_QP_QKEY;
 
1296                 int smirc = internal_modify_qp(
 
1297                         ibqp, &smiqp_attr, smiqp_attr_mask, 1);
 
1299                         ehca_err(ibqp->device, "SMI RESET -> INIT failed. "
 
1300                                  "ehca_modify_qp() rc=%i", smirc);
 
1302                         goto modify_qp_exit1;
 
1304                 qp_cur_state = IB_QPS_INIT;
 
1305                 ehca_dbg(ibqp->device, "SMI RESET -> INIT succeeded");
 
1307         /* is transmitted current state  equal to "real" current state */
 
1308         if ((attr_mask & IB_QP_CUR_STATE) &&
 
1309             qp_cur_state != attr->cur_qp_state) {
 
1311                 ehca_err(ibqp->device,
 
1312                          "Invalid IB_QP_CUR_STATE attr->curr_qp_state=%x <>"
 
1313                          " actual cur_qp_state=%x. ehca_qp=%p qp_num=%x",
 
1314                          attr->cur_qp_state, qp_cur_state, my_qp, ibqp->qp_num);
 
1315                 goto modify_qp_exit1;
 
1318         ehca_dbg(ibqp->device, "ehca_qp=%p qp_num=%x current qp_state=%x "
 
1319                  "new qp_state=%x attribute_mask=%x",
 
1320                  my_qp, ibqp->qp_num, qp_cur_state, attr->qp_state, attr_mask);
 
1322         qp_new_state = attr_mask & IB_QP_STATE ? attr->qp_state : qp_cur_state;
 
1323         if (!smi_reset2init &&
 
1324             !ib_modify_qp_is_ok(qp_cur_state, qp_new_state, ibqp->qp_type,
 
1327                 ehca_err(ibqp->device,
 
1328                          "Invalid qp transition new_state=%x cur_state=%x "
 
1329                          "ehca_qp=%p qp_num=%x attr_mask=%x", qp_new_state,
 
1330                          qp_cur_state, my_qp, ibqp->qp_num, attr_mask);
 
1331                 goto modify_qp_exit1;
 
1334         mqpcb->qp_state = ib2ehca_qp_state(qp_new_state);
 
1335         if (mqpcb->qp_state)
 
1336                 update_mask = EHCA_BMASK_SET(MQPCB_MASK_QP_STATE, 1);
 
1339                 ehca_err(ibqp->device, "Invalid new qp state=%x "
 
1340                          "ehca_qp=%p qp_num=%x",
 
1341                          qp_new_state, my_qp, ibqp->qp_num);
 
1342                 goto modify_qp_exit1;
 
1345         /* retrieve state transition struct to get req and opt attrs */
 
1346         statetrans = get_modqp_statetrans(qp_cur_state, qp_new_state);
 
1347         if (statetrans < 0) {
 
1349                 ehca_err(ibqp->device, "<INVALID STATE CHANGE> qp_cur_state=%x "
 
1350                          "new_qp_state=%x State_xsition=%x ehca_qp=%p "
 
1351                          "qp_num=%x", qp_cur_state, qp_new_state,
 
1352                          statetrans, my_qp, ibqp->qp_num);
 
1353                 goto modify_qp_exit1;
 
1356         qp_attr_idx = ib2ehcaqptype(ibqp->qp_type);
 
1358         if (qp_attr_idx < 0) {
 
1360                 ehca_err(ibqp->device,
 
1361                          "Invalid QP type=%x ehca_qp=%p qp_num=%x",
 
1362                          ibqp->qp_type, my_qp, ibqp->qp_num);
 
1363                 goto modify_qp_exit1;
 
1366         ehca_dbg(ibqp->device,
 
1367                  "ehca_qp=%p qp_num=%x <VALID STATE CHANGE> qp_state_xsit=%x",
 
1368                  my_qp, ibqp->qp_num, statetrans);
 
1370         /* eHCA2 rev2 and higher require the SEND_GRH_FLAG to be set
 
1373         if ((my_qp->qp_type == IB_QPT_UD) &&
 
1374             (my_qp->ext_type != EQPT_LLQP) &&
 
1375             (statetrans == IB_QPST_INIT2RTR) &&
 
1376             (shca->hw_level >= 0x22)) {
 
1377                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SEND_GRH_FLAG, 1);
 
1378                 mqpcb->send_grh_flag = 1;
 
1381         /* sqe -> rts: set purge bit of bad wqe before actual trans */
 
1382         if ((my_qp->qp_type == IB_QPT_UD ||
 
1383              my_qp->qp_type == IB_QPT_GSI ||
 
1384              my_qp->qp_type == IB_QPT_SMI) &&
 
1385             statetrans == IB_QPST_SQE2RTS) {
 
1386                 /* mark next free wqe if kernel */
 
1387                 if (!ibqp->uobject) {
 
1388                         struct ehca_wqe *wqe;
 
1389                         /* lock send queue */
 
1390                         spin_lock_irqsave(&my_qp->spinlock_s, flags);
 
1392                         /* mark next free wqe */
 
1393                         wqe = (struct ehca_wqe *)
 
1394                                 ipz_qeit_get(&my_qp->ipz_squeue);
 
1395                         wqe->optype = wqe->wqef = 0xff;
 
1396                         ehca_dbg(ibqp->device, "qp_num=%x next_free_wqe=%p",
 
1399                 ret = prepare_sqe_rts(my_qp, shca, &bad_wqe_cnt);
 
1401                         ehca_err(ibqp->device, "prepare_sqe_rts() failed "
 
1402                                  "ehca_qp=%p qp_num=%x ret=%i",
 
1403                                  my_qp, ibqp->qp_num, ret);
 
1404                         goto modify_qp_exit2;
 
1409          * enable RDMA_Atomic_Control if reset->init und reliable con
 
1410          * this is necessary since gen2 does not provide that flag,
 
1411          * but pHyp requires it
 
1413         if (statetrans == IB_QPST_RESET2INIT &&
 
1414             (ibqp->qp_type == IB_QPT_RC || ibqp->qp_type == IB_QPT_UC)) {
 
1415                 mqpcb->rdma_atomic_ctrl = 3;
 
1416                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_RDMA_ATOMIC_CTRL, 1);
 
1418         /* circ. pHyp requires #RDMA/Atomic Resp Res for UC INIT -> RTR */
 
1419         if (statetrans == IB_QPST_INIT2RTR &&
 
1420             (ibqp->qp_type == IB_QPT_UC) &&
 
1421             !(attr_mask & IB_QP_MAX_DEST_RD_ATOMIC)) {
 
1422                 mqpcb->rdma_nr_atomic_resp_res = 1; /* default to 1 */
 
1424                         EHCA_BMASK_SET(MQPCB_MASK_RDMA_NR_ATOMIC_RESP_RES, 1);
 
1427         if (attr_mask & IB_QP_PKEY_INDEX) {
 
1428                 if (attr->pkey_index >= 16) {
 
1430                         ehca_err(ibqp->device, "Invalid pkey_index=%x. "
 
1431                                  "ehca_qp=%p qp_num=%x max_pkey_index=f",
 
1432                                  attr->pkey_index, my_qp, ibqp->qp_num);
 
1433                         goto modify_qp_exit2;
 
1435                 mqpcb->prim_p_key_idx = attr->pkey_index;
 
1436                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_P_KEY_IDX, 1);
 
1438         if (attr_mask & IB_QP_PORT) {
 
1439                 struct ehca_sport *sport;
 
1440                 struct ehca_qp *aqp1;
 
1441                 if (attr->port_num < 1 || attr->port_num > shca->num_ports) {
 
1443                         ehca_err(ibqp->device, "Invalid port=%x. "
 
1444                                  "ehca_qp=%p qp_num=%x num_ports=%x",
 
1445                                  attr->port_num, my_qp, ibqp->qp_num,
 
1447                         goto modify_qp_exit2;
 
1449                 sport = &shca->sport[attr->port_num - 1];
 
1450                 if (!sport->ibqp_sqp[IB_QPT_GSI]) {
 
1451                         /* should not occur */
 
1453                         ehca_err(ibqp->device, "AQP1 was not created for "
 
1454                                  "port=%x", attr->port_num);
 
1455                         goto modify_qp_exit2;
 
1457                 aqp1 = container_of(sport->ibqp_sqp[IB_QPT_GSI],
 
1458                                     struct ehca_qp, ib_qp);
 
1459                 if (ibqp->qp_type != IB_QPT_GSI &&
 
1460                     ibqp->qp_type != IB_QPT_SMI &&
 
1461                     aqp1->mod_qp_parm) {
 
1463                          * firmware will reject this modify_qp() because
 
1464                          * port is not activated/initialized fully
 
1467                         ehca_warn(ibqp->device, "Couldn't modify qp port=%x: "
 
1468                                   "either port is being activated (try again) "
 
1469                                   "or cabling issue", attr->port_num);
 
1470                         goto modify_qp_exit2;
 
1472                 mqpcb->prim_phys_port = attr->port_num;
 
1473                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PRIM_PHYS_PORT, 1);
 
1475         if (attr_mask & IB_QP_QKEY) {
 
1476                 mqpcb->qkey = attr->qkey;
 
1477                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_QKEY, 1);
 
1479         if (attr_mask & IB_QP_AV) {
 
1480                 mqpcb->dlid = attr->ah_attr.dlid;
 
1481                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DLID, 1);
 
1482                 mqpcb->source_path_bits = attr->ah_attr.src_path_bits;
 
1483                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SOURCE_PATH_BITS, 1);
 
1484                 mqpcb->service_level = attr->ah_attr.sl;
 
1485                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL, 1);
 
1487                 if (ehca_calc_ipd(shca, mqpcb->prim_phys_port,
 
1488                                   attr->ah_attr.static_rate,
 
1489                                   &mqpcb->max_static_rate)) {
 
1491                         goto modify_qp_exit2;
 
1493                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_MAX_STATIC_RATE, 1);
 
1496                  * Always supply the GRH flag, even if it's zero, to give the
 
1497                  * hypervisor a clear "yes" or "no" instead of a "perhaps"
 
1499                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SEND_GRH_FLAG, 1);
 
1502                  * only if GRH is TRUE we might consider SOURCE_GID_IDX
 
1503                  * and DEST_GID otherwise phype will return H_ATTR_PARM!!!
 
1505                 if (attr->ah_attr.ah_flags == IB_AH_GRH) {
 
1506                         mqpcb->send_grh_flag = 1;
 
1508                         mqpcb->source_gid_idx = attr->ah_attr.grh.sgid_index;
 
1510                                 EHCA_BMASK_SET(MQPCB_MASK_SOURCE_GID_IDX, 1);
 
1512                         for (cnt = 0; cnt < 16; cnt++)
 
1513                                 mqpcb->dest_gid.byte[cnt] =
 
1514                                         attr->ah_attr.grh.dgid.raw[cnt];
 
1516                         update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DEST_GID, 1);
 
1517                         mqpcb->flow_label = attr->ah_attr.grh.flow_label;
 
1518                         update_mask |= EHCA_BMASK_SET(MQPCB_MASK_FLOW_LABEL, 1);
 
1519                         mqpcb->hop_limit = attr->ah_attr.grh.hop_limit;
 
1520                         update_mask |= EHCA_BMASK_SET(MQPCB_MASK_HOP_LIMIT, 1);
 
1521                         mqpcb->traffic_class = attr->ah_attr.grh.traffic_class;
 
1523                                 EHCA_BMASK_SET(MQPCB_MASK_TRAFFIC_CLASS, 1);
 
1527         if (attr_mask & IB_QP_PATH_MTU) {
 
1529                 my_qp->mtu_shift = attr->path_mtu + 7;
 
1530                 mqpcb->path_mtu = attr->path_mtu;
 
1531                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_PATH_MTU, 1);
 
1533         if (attr_mask & IB_QP_TIMEOUT) {
 
1534                 mqpcb->timeout = attr->timeout;
 
1535                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_TIMEOUT, 1);
 
1537         if (attr_mask & IB_QP_RETRY_CNT) {
 
1538                 mqpcb->retry_count = attr->retry_cnt;
 
1539                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_RETRY_COUNT, 1);
 
1541         if (attr_mask & IB_QP_RNR_RETRY) {
 
1542                 mqpcb->rnr_retry_count = attr->rnr_retry;
 
1543                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_RNR_RETRY_COUNT, 1);
 
1545         if (attr_mask & IB_QP_RQ_PSN) {
 
1546                 mqpcb->receive_psn = attr->rq_psn;
 
1547                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_RECEIVE_PSN, 1);
 
1549         if (attr_mask & IB_QP_MAX_DEST_RD_ATOMIC) {
 
1550                 mqpcb->rdma_nr_atomic_resp_res = attr->max_dest_rd_atomic < 3 ?
 
1551                         attr->max_dest_rd_atomic : 2;
 
1553                         EHCA_BMASK_SET(MQPCB_MASK_RDMA_NR_ATOMIC_RESP_RES, 1);
 
1555         if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC) {
 
1556                 mqpcb->rdma_atomic_outst_dest_qp = attr->max_rd_atomic < 3 ?
 
1557                         attr->max_rd_atomic : 2;
 
1560                         (MQPCB_MASK_RDMA_ATOMIC_OUTST_DEST_QP, 1);
 
1562         if (attr_mask & IB_QP_ALT_PATH) {
 
1563                 if (attr->alt_port_num < 1
 
1564                     || attr->alt_port_num > shca->num_ports) {
 
1566                         ehca_err(ibqp->device, "Invalid alt_port=%x. "
 
1567                                  "ehca_qp=%p qp_num=%x num_ports=%x",
 
1568                                  attr->alt_port_num, my_qp, ibqp->qp_num,
 
1570                         goto modify_qp_exit2;
 
1572                 mqpcb->alt_phys_port = attr->alt_port_num;
 
1574                 if (attr->alt_pkey_index >= 16) {
 
1576                         ehca_err(ibqp->device, "Invalid alt_pkey_index=%x. "
 
1577                                  "ehca_qp=%p qp_num=%x max_pkey_index=f",
 
1578                                  attr->pkey_index, my_qp, ibqp->qp_num);
 
1579                         goto modify_qp_exit2;
 
1581                 mqpcb->alt_p_key_idx = attr->alt_pkey_index;
 
1583                 mqpcb->timeout_al = attr->alt_timeout;
 
1584                 mqpcb->dlid_al = attr->alt_ah_attr.dlid;
 
1585                 mqpcb->source_path_bits_al = attr->alt_ah_attr.src_path_bits;
 
1586                 mqpcb->service_level_al = attr->alt_ah_attr.sl;
 
1588                 if (ehca_calc_ipd(shca, mqpcb->alt_phys_port,
 
1589                                   attr->alt_ah_attr.static_rate,
 
1590                                   &mqpcb->max_static_rate_al)) {
 
1592                         goto modify_qp_exit2;
 
1595                 /* OpenIB doesn't support alternate retry counts - copy them */
 
1596                 mqpcb->retry_count_al = mqpcb->retry_count;
 
1597                 mqpcb->rnr_retry_count_al = mqpcb->rnr_retry_count;
 
1599                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_ALT_PHYS_PORT, 1)
 
1600                         | EHCA_BMASK_SET(MQPCB_MASK_ALT_P_KEY_IDX, 1)
 
1601                         | EHCA_BMASK_SET(MQPCB_MASK_TIMEOUT_AL, 1)
 
1602                         | EHCA_BMASK_SET(MQPCB_MASK_DLID_AL, 1)
 
1603                         | EHCA_BMASK_SET(MQPCB_MASK_SOURCE_PATH_BITS_AL, 1)
 
1604                         | EHCA_BMASK_SET(MQPCB_MASK_SERVICE_LEVEL_AL, 1)
 
1605                         | EHCA_BMASK_SET(MQPCB_MASK_MAX_STATIC_RATE_AL, 1)
 
1606                         | EHCA_BMASK_SET(MQPCB_MASK_RETRY_COUNT_AL, 1)
 
1607                         | EHCA_BMASK_SET(MQPCB_MASK_RNR_RETRY_COUNT_AL, 1);
 
1610                  * Always supply the GRH flag, even if it's zero, to give the
 
1611                  * hypervisor a clear "yes" or "no" instead of a "perhaps"
 
1613                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SEND_GRH_FLAG_AL, 1);
 
1616                  * only if GRH is TRUE we might consider SOURCE_GID_IDX
 
1617                  * and DEST_GID otherwise phype will return H_ATTR_PARM!!!
 
1619                 if (attr->alt_ah_attr.ah_flags == IB_AH_GRH) {
 
1620                         mqpcb->send_grh_flag_al = 1;
 
1622                         for (cnt = 0; cnt < 16; cnt++)
 
1623                                 mqpcb->dest_gid_al.byte[cnt] =
 
1624                                         attr->alt_ah_attr.grh.dgid.raw[cnt];
 
1625                         mqpcb->source_gid_idx_al =
 
1626                                 attr->alt_ah_attr.grh.sgid_index;
 
1627                         mqpcb->flow_label_al = attr->alt_ah_attr.grh.flow_label;
 
1628                         mqpcb->hop_limit_al = attr->alt_ah_attr.grh.hop_limit;
 
1629                         mqpcb->traffic_class_al =
 
1630                                 attr->alt_ah_attr.grh.traffic_class;
 
1633                                 EHCA_BMASK_SET(MQPCB_MASK_SOURCE_GID_IDX_AL, 1)
 
1634                                 | EHCA_BMASK_SET(MQPCB_MASK_DEST_GID_AL, 1)
 
1635                                 | EHCA_BMASK_SET(MQPCB_MASK_FLOW_LABEL_AL, 1)
 
1636                                 | EHCA_BMASK_SET(MQPCB_MASK_HOP_LIMIT_AL, 1) |
 
1637                                 EHCA_BMASK_SET(MQPCB_MASK_TRAFFIC_CLASS_AL, 1);
 
1641         if (attr_mask & IB_QP_MIN_RNR_TIMER) {
 
1642                 mqpcb->min_rnr_nak_timer_field = attr->min_rnr_timer;
 
1644                         EHCA_BMASK_SET(MQPCB_MASK_MIN_RNR_NAK_TIMER_FIELD, 1);
 
1647         if (attr_mask & IB_QP_SQ_PSN) {
 
1648                 mqpcb->send_psn = attr->sq_psn;
 
1649                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_SEND_PSN, 1);
 
1652         if (attr_mask & IB_QP_DEST_QPN) {
 
1653                 mqpcb->dest_qp_nr = attr->dest_qp_num;
 
1654                 update_mask |= EHCA_BMASK_SET(MQPCB_MASK_DEST_QP_NR, 1);
 
1657         if (attr_mask & IB_QP_PATH_MIG_STATE) {
 
1658                 if (attr->path_mig_state != IB_MIG_REARM
 
1659                     && attr->path_mig_state != IB_MIG_MIGRATED) {
 
1661                         ehca_err(ibqp->device, "Invalid mig_state=%x",
 
1662                                  attr->path_mig_state);
 
1663                         goto modify_qp_exit2;
 
1665                 mqpcb->path_migration_state = attr->path_mig_state + 1;
 
1666                 if (attr->path_mig_state == IB_MIG_REARM)
 
1667                         my_qp->mig_armed = 1;
 
1669                         EHCA_BMASK_SET(MQPCB_MASK_PATH_MIGRATION_STATE, 1);
 
1672         if (attr_mask & IB_QP_CAP) {
 
1673                 mqpcb->max_nr_outst_send_wr = attr->cap.max_send_wr+1;
 
1675                         EHCA_BMASK_SET(MQPCB_MASK_MAX_NR_OUTST_SEND_WR, 1);
 
1676                 mqpcb->max_nr_outst_recv_wr = attr->cap.max_recv_wr+1;
 
1678                         EHCA_BMASK_SET(MQPCB_MASK_MAX_NR_OUTST_RECV_WR, 1);
 
1679                 /* no support for max_send/recv_sge yet */
 
1682         if (ehca_debug_level >= 2)
 
1683                 ehca_dmp(mqpcb, 4*70, "qp_num=%x", ibqp->qp_num);
 
1685         h_ret = hipz_h_modify_qp(shca->ipz_hca_handle,
 
1686                                  my_qp->ipz_qp_handle,
 
1689                                  mqpcb, my_qp->galpas.kernel);
 
1691         if (h_ret != H_SUCCESS) {
 
1692                 ret = ehca2ib_return_code(h_ret);
 
1693                 ehca_err(ibqp->device, "hipz_h_modify_qp() failed h_ret=%li "
 
1694                          "ehca_qp=%p qp_num=%x", h_ret, my_qp, ibqp->qp_num);
 
1695                 goto modify_qp_exit2;
 
1698         if ((my_qp->qp_type == IB_QPT_UD ||
 
1699              my_qp->qp_type == IB_QPT_GSI ||
 
1700              my_qp->qp_type == IB_QPT_SMI) &&
 
1701             statetrans == IB_QPST_SQE2RTS) {
 
1702                 /* doorbell to reprocessing wqes */
 
1703                 iosync(); /* serialize GAL register access */
 
1704                 hipz_update_sqa(my_qp, bad_wqe_cnt-1);
 
1705                 ehca_gen_dbg("doorbell for %x wqes", bad_wqe_cnt);
 
1708         if (statetrans == IB_QPST_RESET2INIT ||
 
1709             statetrans == IB_QPST_INIT2INIT) {
 
1710                 mqpcb->qp_enable = 1;
 
1711                 mqpcb->qp_state = EHCA_QPS_INIT;
 
1713                 update_mask = EHCA_BMASK_SET(MQPCB_MASK_QP_ENABLE, 1);
 
1715                 h_ret = hipz_h_modify_qp(shca->ipz_hca_handle,
 
1716                                          my_qp->ipz_qp_handle,
 
1720                                          my_qp->galpas.kernel);
 
1722                 if (h_ret != H_SUCCESS) {
 
1723                         ret = ehca2ib_return_code(h_ret);
 
1724                         ehca_err(ibqp->device, "ENABLE in context of "
 
1725                                  "RESET_2_INIT failed! Maybe you didn't get "
 
1726                                  "a LID h_ret=%li ehca_qp=%p qp_num=%x",
 
1727                                  h_ret, my_qp, ibqp->qp_num);
 
1728                         goto modify_qp_exit2;
 
1731         if ((qp_new_state == IB_QPS_ERR) && (qp_cur_state != IB_QPS_ERR)) {
 
1732                 ret = check_for_left_cqes(my_qp, shca);
 
1734                         goto modify_qp_exit2;
 
1737         if (statetrans == IB_QPST_ANY2RESET) {
 
1738                 ipz_qeit_reset(&my_qp->ipz_rqueue);
 
1739                 ipz_qeit_reset(&my_qp->ipz_squeue);
 
1741                 if (qp_cur_state == IB_QPS_ERR) {
 
1742                         del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
1745                                 del_from_err_list(my_qp->recv_cq,
 
1746                                                   &my_qp->rq_err_node);
 
1748                 reset_queue_map(&my_qp->sq_map);
 
1751                         reset_queue_map(&my_qp->rq_map);
 
1754         if (attr_mask & IB_QP_QKEY)
 
1755                 my_qp->qkey = attr->qkey;
 
1758         if (squeue_locked) { /* this means: sqe -> rts */
 
1759                 spin_unlock_irqrestore(&my_qp->spinlock_s, flags);
 
1760                 my_qp->sqerr_purgeflag = 1;
 
1764         ehca_free_fw_ctrlblock(mqpcb);
 
1769 int ehca_modify_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr, int attr_mask,
 
1770                    struct ib_udata *udata)
 
1774         struct ehca_shca *shca = container_of(ibqp->device, struct ehca_shca,
 
1776         struct ehca_qp *my_qp = container_of(ibqp, struct ehca_qp, ib_qp);
 
1778         /* The if-block below caches qp_attr to be modified for GSI and SMI
 
1779          * qps during the initialization by ib_mad. When the respective port
 
1780          * is activated, ie we got an event PORT_ACTIVE, we'll replay the
 
1781          * cached modify calls sequence, see ehca_recover_sqs() below.
 
1782          * Why that is required:
 
1783          * 1) If one port is connected, older code requires that port one
 
1784          *    to be connected and module option nr_ports=1 to be given by
 
1785          *    user, which is very inconvenient for end user.
 
1786          * 2) Firmware accepts modify_qp() only if respective port has become
 
1787          *    active. Older code had a wait loop of 30sec create_qp()/
 
1788          *    define_aqp1(), which is not appropriate in practice. This
 
1789          *    code now removes that wait loop, see define_aqp1(), and always
 
1790          *    reports all ports to ib_mad resp. users. Only activated ports
 
1791          *    will then usable for the users.
 
1793         if (ibqp->qp_type == IB_QPT_GSI || ibqp->qp_type == IB_QPT_SMI) {
 
1794                 int port = my_qp->init_attr.port_num;
 
1795                 struct ehca_sport *sport = &shca->sport[port - 1];
 
1796                 unsigned long flags;
 
1797                 spin_lock_irqsave(&sport->mod_sqp_lock, flags);
 
1798                 /* cache qp_attr only during init */
 
1799                 if (my_qp->mod_qp_parm) {
 
1800                         struct ehca_mod_qp_parm *p;
 
1801                         if (my_qp->mod_qp_parm_idx >= EHCA_MOD_QP_PARM_MAX) {
 
1802                                 ehca_err(&shca->ib_device,
 
1803                                          "mod_qp_parm overflow state=%x port=%x"
 
1804                                          " type=%x", attr->qp_state,
 
1805                                          my_qp->init_attr.port_num,
 
1807                                 spin_unlock_irqrestore(&sport->mod_sqp_lock,
 
1811                         p = &my_qp->mod_qp_parm[my_qp->mod_qp_parm_idx];
 
1812                         p->mask = attr_mask;
 
1814                         my_qp->mod_qp_parm_idx++;
 
1815                         ehca_dbg(&shca->ib_device,
 
1816                                  "Saved qp_attr for state=%x port=%x type=%x",
 
1817                                  attr->qp_state, my_qp->init_attr.port_num,
 
1819                         spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 
1822                 spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 
1825         ret = internal_modify_qp(ibqp, attr, attr_mask, 0);
 
1828         if ((ret == 0) && (attr_mask & IB_QP_STATE))
 
1829                 my_qp->state = attr->qp_state;
 
1834 void ehca_recover_sqp(struct ib_qp *sqp)
 
1836         struct ehca_qp *my_sqp = container_of(sqp, struct ehca_qp, ib_qp);
 
1837         int port = my_sqp->init_attr.port_num;
 
1838         struct ib_qp_attr attr;
 
1839         struct ehca_mod_qp_parm *qp_parm;
 
1840         int i, qp_parm_idx, ret;
 
1841         unsigned long flags, wr_cnt;
 
1843         if (!my_sqp->mod_qp_parm)
 
1845         ehca_dbg(sqp->device, "SQP port=%x qp_num=%x", port, sqp->qp_num);
 
1847         qp_parm = my_sqp->mod_qp_parm;
 
1848         qp_parm_idx = my_sqp->mod_qp_parm_idx;
 
1849         for (i = 0; i < qp_parm_idx; i++) {
 
1850                 attr = qp_parm[i].attr;
 
1851                 ret = internal_modify_qp(sqp, &attr, qp_parm[i].mask, 0);
 
1853                         ehca_err(sqp->device, "Could not modify SQP port=%x "
 
1854                                  "qp_num=%x ret=%x", port, sqp->qp_num, ret);
 
1857                 ehca_dbg(sqp->device, "SQP port=%x qp_num=%x in state=%x",
 
1858                          port, sqp->qp_num, attr.qp_state);
 
1861         /* re-trigger posted recv wrs */
 
1862         wr_cnt =  my_sqp->ipz_rqueue.current_q_offset /
 
1863                 my_sqp->ipz_rqueue.qe_size;
 
1865                 spin_lock_irqsave(&my_sqp->spinlock_r, flags);
 
1866                 hipz_update_rqa(my_sqp, wr_cnt);
 
1867                 spin_unlock_irqrestore(&my_sqp->spinlock_r, flags);
 
1868                 ehca_dbg(sqp->device, "doorbell port=%x qp_num=%x wr_cnt=%lx",
 
1869                          port, sqp->qp_num, wr_cnt);
 
1874         /* this prevents subsequent calls to modify_qp() to cache qp_attr */
 
1875         my_sqp->mod_qp_parm = NULL;
 
1878 int ehca_query_qp(struct ib_qp *qp,
 
1879                   struct ib_qp_attr *qp_attr,
 
1880                   int qp_attr_mask, struct ib_qp_init_attr *qp_init_attr)
 
1882         struct ehca_qp *my_qp = container_of(qp, struct ehca_qp, ib_qp);
 
1883         struct ehca_shca *shca = container_of(qp->device, struct ehca_shca,
 
1885         struct ipz_adapter_handle adapter_handle = shca->ipz_hca_handle;
 
1886         struct hcp_modify_qp_control_block *qpcb;
 
1890         if (qp_attr_mask & QP_ATTR_QUERY_NOT_SUPPORTED) {
 
1891                 ehca_err(qp->device, "Invalid attribute mask "
 
1892                          "ehca_qp=%p qp_num=%x qp_attr_mask=%x ",
 
1893                          my_qp, qp->qp_num, qp_attr_mask);
 
1897         qpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
 
1899                 ehca_err(qp->device, "Out of memory for qpcb "
 
1900                          "ehca_qp=%p qp_num=%x", my_qp, qp->qp_num);
 
1904         h_ret = hipz_h_query_qp(adapter_handle,
 
1905                                 my_qp->ipz_qp_handle,
 
1907                                 qpcb, my_qp->galpas.kernel);
 
1909         if (h_ret != H_SUCCESS) {
 
1910                 ret = ehca2ib_return_code(h_ret);
 
1911                 ehca_err(qp->device, "hipz_h_query_qp() failed "
 
1912                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
1913                          my_qp, qp->qp_num, h_ret);
 
1914                 goto query_qp_exit1;
 
1917         qp_attr->cur_qp_state = ehca2ib_qp_state(qpcb->qp_state);
 
1918         qp_attr->qp_state = qp_attr->cur_qp_state;
 
1920         if (qp_attr->cur_qp_state == -EINVAL) {
 
1922                 ehca_err(qp->device, "Got invalid ehca_qp_state=%x "
 
1923                          "ehca_qp=%p qp_num=%x",
 
1924                          qpcb->qp_state, my_qp, qp->qp_num);
 
1925                 goto query_qp_exit1;
 
1928         if (qp_attr->qp_state == IB_QPS_SQD)
 
1929                 qp_attr->sq_draining = 1;
 
1931         qp_attr->qkey = qpcb->qkey;
 
1932         qp_attr->path_mtu = qpcb->path_mtu;
 
1933         qp_attr->path_mig_state = qpcb->path_migration_state - 1;
 
1934         qp_attr->rq_psn = qpcb->receive_psn;
 
1935         qp_attr->sq_psn = qpcb->send_psn;
 
1936         qp_attr->min_rnr_timer = qpcb->min_rnr_nak_timer_field;
 
1937         qp_attr->cap.max_send_wr = qpcb->max_nr_outst_send_wr-1;
 
1938         qp_attr->cap.max_recv_wr = qpcb->max_nr_outst_recv_wr-1;
 
1939         /* UD_AV CIRCUMVENTION */
 
1940         if (my_qp->qp_type == IB_QPT_UD) {
 
1941                 qp_attr->cap.max_send_sge =
 
1942                         qpcb->actual_nr_sges_in_sq_wqe - 2;
 
1943                 qp_attr->cap.max_recv_sge =
 
1944                         qpcb->actual_nr_sges_in_rq_wqe - 2;
 
1946                 qp_attr->cap.max_send_sge =
 
1947                         qpcb->actual_nr_sges_in_sq_wqe;
 
1948                 qp_attr->cap.max_recv_sge =
 
1949                         qpcb->actual_nr_sges_in_rq_wqe;
 
1952         qp_attr->cap.max_inline_data = my_qp->sq_max_inline_data_size;
 
1953         qp_attr->dest_qp_num = qpcb->dest_qp_nr;
 
1955         qp_attr->pkey_index =
 
1956                 EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->prim_p_key_idx);
 
1959                 EHCA_BMASK_GET(MQPCB_PRIM_PHYS_PORT, qpcb->prim_phys_port);
 
1961         qp_attr->timeout = qpcb->timeout;
 
1962         qp_attr->retry_cnt = qpcb->retry_count;
 
1963         qp_attr->rnr_retry = qpcb->rnr_retry_count;
 
1965         qp_attr->alt_pkey_index =
 
1966                 EHCA_BMASK_GET(MQPCB_PRIM_P_KEY_IDX, qpcb->alt_p_key_idx);
 
1968         qp_attr->alt_port_num = qpcb->alt_phys_port;
 
1969         qp_attr->alt_timeout = qpcb->timeout_al;
 
1971         qp_attr->max_dest_rd_atomic = qpcb->rdma_nr_atomic_resp_res;
 
1972         qp_attr->max_rd_atomic = qpcb->rdma_atomic_outst_dest_qp;
 
1975         qp_attr->ah_attr.sl = qpcb->service_level;
 
1977         if (qpcb->send_grh_flag) {
 
1978                 qp_attr->ah_attr.ah_flags = IB_AH_GRH;
 
1981         qp_attr->ah_attr.static_rate = qpcb->max_static_rate;
 
1982         qp_attr->ah_attr.dlid = qpcb->dlid;
 
1983         qp_attr->ah_attr.src_path_bits = qpcb->source_path_bits;
 
1984         qp_attr->ah_attr.port_num = qp_attr->port_num;
 
1987         qp_attr->ah_attr.grh.traffic_class = qpcb->traffic_class;
 
1988         qp_attr->ah_attr.grh.hop_limit = qpcb->hop_limit;
 
1989         qp_attr->ah_attr.grh.sgid_index = qpcb->source_gid_idx;
 
1990         qp_attr->ah_attr.grh.flow_label = qpcb->flow_label;
 
1992         for (cnt = 0; cnt < 16; cnt++)
 
1993                 qp_attr->ah_attr.grh.dgid.raw[cnt] =
 
1994                         qpcb->dest_gid.byte[cnt];
 
1997         qp_attr->alt_ah_attr.sl = qpcb->service_level_al;
 
1998         if (qpcb->send_grh_flag_al) {
 
1999                 qp_attr->alt_ah_attr.ah_flags = IB_AH_GRH;
 
2002         qp_attr->alt_ah_attr.static_rate = qpcb->max_static_rate_al;
 
2003         qp_attr->alt_ah_attr.dlid = qpcb->dlid_al;
 
2004         qp_attr->alt_ah_attr.src_path_bits = qpcb->source_path_bits_al;
 
2007         qp_attr->alt_ah_attr.grh.traffic_class = qpcb->traffic_class_al;
 
2008         qp_attr->alt_ah_attr.grh.hop_limit = qpcb->hop_limit_al;
 
2009         qp_attr->alt_ah_attr.grh.sgid_index = qpcb->source_gid_idx_al;
 
2010         qp_attr->alt_ah_attr.grh.flow_label = qpcb->flow_label_al;
 
2012         for (cnt = 0; cnt < 16; cnt++)
 
2013                 qp_attr->alt_ah_attr.grh.dgid.raw[cnt] =
 
2014                         qpcb->dest_gid_al.byte[cnt];
 
2016         /* return init attributes given in ehca_create_qp */
 
2018                 *qp_init_attr = my_qp->init_attr;
 
2020         if (ehca_debug_level >= 2)
 
2021                 ehca_dmp(qpcb, 4*70, "qp_num=%x", qp->qp_num);
 
2024         ehca_free_fw_ctrlblock(qpcb);
 
2029 int ehca_modify_srq(struct ib_srq *ibsrq, struct ib_srq_attr *attr,
 
2030                     enum ib_srq_attr_mask attr_mask, struct ib_udata *udata)
 
2032         struct ehca_qp *my_qp =
 
2033                 container_of(ibsrq, struct ehca_qp, ib_srq);
 
2034         struct ehca_shca *shca =
 
2035                 container_of(ibsrq->pd->device, struct ehca_shca, ib_device);
 
2036         struct hcp_modify_qp_control_block *mqpcb;
 
2041         mqpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
 
2043                 ehca_err(ibsrq->device, "Could not get zeroed page for mqpcb "
 
2044                          "ehca_qp=%p qp_num=%x ", my_qp, my_qp->real_qp_num);
 
2049         if (attr_mask & IB_SRQ_LIMIT) {
 
2050                 attr_mask &= ~IB_SRQ_LIMIT;
 
2052                         EHCA_BMASK_SET(MQPCB_MASK_CURR_SRQ_LIMIT, 1)
 
2053                         | EHCA_BMASK_SET(MQPCB_MASK_QP_AFF_ASYN_EV_LOG_REG, 1);
 
2054                 mqpcb->curr_srq_limit =
 
2055                         EHCA_BMASK_SET(MQPCB_CURR_SRQ_LIMIT, attr->srq_limit);
 
2056                 mqpcb->qp_aff_asyn_ev_log_reg =
 
2057                         EHCA_BMASK_SET(QPX_AAELOG_RESET_SRQ_LIMIT, 1);
 
2060         /* by now, all bits in attr_mask should have been cleared */
 
2062                 ehca_err(ibsrq->device, "invalid attribute mask bits set  "
 
2063                          "attr_mask=%x", attr_mask);
 
2065                 goto modify_srq_exit0;
 
2068         if (ehca_debug_level >= 2)
 
2069                 ehca_dmp(mqpcb, 4*70, "qp_num=%x", my_qp->real_qp_num);
 
2071         h_ret = hipz_h_modify_qp(shca->ipz_hca_handle, my_qp->ipz_qp_handle,
 
2072                                  NULL, update_mask, mqpcb,
 
2073                                  my_qp->galpas.kernel);
 
2075         if (h_ret != H_SUCCESS) {
 
2076                 ret = ehca2ib_return_code(h_ret);
 
2077                 ehca_err(ibsrq->device, "hipz_h_modify_qp() failed h_ret=%li "
 
2078                          "ehca_qp=%p qp_num=%x",
 
2079                          h_ret, my_qp, my_qp->real_qp_num);
 
2083         ehca_free_fw_ctrlblock(mqpcb);
 
2088 int ehca_query_srq(struct ib_srq *srq, struct ib_srq_attr *srq_attr)
 
2090         struct ehca_qp *my_qp = container_of(srq, struct ehca_qp, ib_srq);
 
2091         struct ehca_shca *shca = container_of(srq->device, struct ehca_shca,
 
2093         struct ipz_adapter_handle adapter_handle = shca->ipz_hca_handle;
 
2094         struct hcp_modify_qp_control_block *qpcb;
 
2098         qpcb = ehca_alloc_fw_ctrlblock(GFP_KERNEL);
 
2100                 ehca_err(srq->device, "Out of memory for qpcb "
 
2101                          "ehca_qp=%p qp_num=%x", my_qp, my_qp->real_qp_num);
 
2105         h_ret = hipz_h_query_qp(adapter_handle, my_qp->ipz_qp_handle,
 
2106                                 NULL, qpcb, my_qp->galpas.kernel);
 
2108         if (h_ret != H_SUCCESS) {
 
2109                 ret = ehca2ib_return_code(h_ret);
 
2110                 ehca_err(srq->device, "hipz_h_query_qp() failed "
 
2111                          "ehca_qp=%p qp_num=%x h_ret=%li",
 
2112                          my_qp, my_qp->real_qp_num, h_ret);
 
2113                 goto query_srq_exit1;
 
2116         srq_attr->max_wr = qpcb->max_nr_outst_recv_wr - 1;
 
2117         srq_attr->max_sge = 3;
 
2118         srq_attr->srq_limit = EHCA_BMASK_GET(
 
2119                 MQPCB_CURR_SRQ_LIMIT, qpcb->curr_srq_limit);
 
2121         if (ehca_debug_level >= 2)
 
2122                 ehca_dmp(qpcb, 4*70, "qp_num=%x", my_qp->real_qp_num);
 
2125         ehca_free_fw_ctrlblock(qpcb);
 
2130 static int internal_destroy_qp(struct ib_device *dev, struct ehca_qp *my_qp,
 
2131                                struct ib_uobject *uobject)
 
2133         struct ehca_shca *shca = container_of(dev, struct ehca_shca, ib_device);
 
2134         struct ehca_pd *my_pd = container_of(my_qp->ib_qp.pd, struct ehca_pd,
 
2136         struct ehca_sport *sport = &shca->sport[my_qp->init_attr.port_num - 1];
 
2137         u32 qp_num = my_qp->real_qp_num;
 
2141         enum ib_qp_type qp_type;
 
2142         unsigned long flags;
 
2145                 if (my_qp->mm_count_galpa ||
 
2146                     my_qp->mm_count_rqueue || my_qp->mm_count_squeue) {
 
2147                         ehca_err(dev, "Resources still referenced in "
 
2148                                  "user space qp_num=%x", qp_num);
 
2153         if (my_qp->send_cq) {
 
2154                 ret = ehca_cq_unassign_qp(my_qp->send_cq, qp_num);
 
2156                         ehca_err(dev, "Couldn't unassign qp from "
 
2157                                  "send_cq ret=%i qp_num=%x cq_num=%x", ret,
 
2158                                  qp_num, my_qp->send_cq->cq_number);
 
2163         write_lock_irqsave(&ehca_qp_idr_lock, flags);
 
2164         idr_remove(&ehca_qp_idr, my_qp->token);
 
2165         write_unlock_irqrestore(&ehca_qp_idr_lock, flags);
 
2168          * SRQs will never get into an error list and do not have a recv_cq,
 
2169          * so we need to skip them here.
 
2171         if (HAS_RQ(my_qp) && !IS_SRQ(my_qp))
 
2172                 del_from_err_list(my_qp->recv_cq, &my_qp->rq_err_node);
 
2175                 del_from_err_list(my_qp->send_cq, &my_qp->sq_err_node);
 
2177         /* now wait until all pending events have completed */
 
2178         wait_event(my_qp->wait_completion, !atomic_read(&my_qp->nr_events));
 
2180         h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
 
2181         if (h_ret != H_SUCCESS) {
 
2182                 ehca_err(dev, "hipz_h_destroy_qp() failed h_ret=%li "
 
2183                          "ehca_qp=%p qp_num=%x", h_ret, my_qp, qp_num);
 
2184                 return ehca2ib_return_code(h_ret);
 
2187         port_num = my_qp->init_attr.port_num;
 
2188         qp_type  = my_qp->init_attr.qp_type;
 
2190         if (qp_type == IB_QPT_SMI || qp_type == IB_QPT_GSI) {
 
2191                 spin_lock_irqsave(&sport->mod_sqp_lock, flags);
 
2192                 kfree(my_qp->mod_qp_parm);
 
2193                 my_qp->mod_qp_parm = NULL;
 
2194                 shca->sport[port_num - 1].ibqp_sqp[qp_type] = NULL;
 
2195                 spin_unlock_irqrestore(&sport->mod_sqp_lock, flags);
 
2198         /* no support for IB_QPT_SMI yet */
 
2199         if (qp_type == IB_QPT_GSI) {
 
2200                 struct ib_event event;
 
2201                 ehca_info(dev, "device %s: port %x is inactive.",
 
2202                                 shca->ib_device.name, port_num);
 
2203                 event.device = &shca->ib_device;
 
2204                 event.event = IB_EVENT_PORT_ERR;
 
2205                 event.element.port_num = port_num;
 
2206                 shca->sport[port_num - 1].port_state = IB_PORT_DOWN;
 
2207                 ib_dispatch_event(&event);
 
2210         if (HAS_RQ(my_qp)) {
 
2211                 ipz_queue_dtor(my_pd, &my_qp->ipz_rqueue);
 
2213                 vfree(my_qp->rq_map.map);
 
2215         if (HAS_SQ(my_qp)) {
 
2216                 ipz_queue_dtor(my_pd, &my_qp->ipz_squeue);
 
2218                 vfree(my_qp->sq_map.map);
 
2220         kmem_cache_free(qp_cache, my_qp);
 
2221         atomic_dec(&shca->num_qps);
 
2225 int ehca_destroy_qp(struct ib_qp *qp)
 
2227         return internal_destroy_qp(qp->device,
 
2228                                    container_of(qp, struct ehca_qp, ib_qp),
 
2232 int ehca_destroy_srq(struct ib_srq *srq)
 
2234         return internal_destroy_qp(srq->device,
 
2235                                    container_of(srq, struct ehca_qp, ib_srq),
 
2239 int ehca_init_qp_cache(void)
 
2241         qp_cache = kmem_cache_create("ehca_cache_qp",
 
2242                                      sizeof(struct ehca_qp), 0,
 
2250 void ehca_cleanup_qp_cache(void)
 
2253                 kmem_cache_destroy(qp_cache);