git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/cell/interrupt.h

   1 #ifndef ASM_CELL_PIC_H
   2 #define ASM_CELL_PIC_H
   3 #ifdef __KERNEL__
   4 /*
   5  * Mapping of IIC pending bits into per-node interrupt numbers.
   6  *
   7  * Interrupt numbers are in the range 0...0x1ff where the top bit
   8  * (0x100) represent the source node. Only 2 nodes are supported with
   9  * the current code though it's trivial to extend that if necessary using
  10  * higher level bits
  11  *
  12  * The bottom 8 bits are split into 2 type bits and 6 data bits that
  13  * depend on the type:
  14  *
  15  * 00 (0x00 | data) : normal interrupt. data is (class << 4) | source
  16  * 01 (0x40 | data) : IO exception. data is the exception number as
  17  *                    defined by bit numbers in IIC_SR
  18  * 10 (0x80 | data) : IPI. data is the IPI number (obtained from the priority)
  19  *                    and node is always 0 (IPIs are per-cpu, their source is
  20  *                    not relevant)
  21  * 11 (0xc0 | data) : reserved
  22  *
  23  * In addition, interrupt number 0x80000000 is defined as always invalid
  24  * (that is the node field is expected to never extend to move than 23 bits)
  25  *
  26  */
  27
  28 enum {
  29         IIC_IRQ_INVALID         = 0x80000000u,
  30         IIC_IRQ_NODE_MASK       = 0x100,
  31         IIC_IRQ_NODE_SHIFT      = 8,
  32         IIC_IRQ_MAX             = 0x1ff,
  33         IIC_IRQ_TYPE_MASK       = 0xc0,
  34         IIC_IRQ_TYPE_NORMAL     = 0x00,
  35         IIC_IRQ_TYPE_IOEXC      = 0x40,
  36         IIC_IRQ_TYPE_IPI        = 0x80,
  37         IIC_IRQ_CLASS_SHIFT     = 4,
  38         IIC_IRQ_CLASS_0         = 0x00,
  39         IIC_IRQ_CLASS_1         = 0x10,
  40         IIC_IRQ_CLASS_2         = 0x20,
  41         IIC_SOURCE_COUNT        = 0x200,
  42
  43         /* Here are defined the various source/dest units. Avoid using those
  44          * definitions if you can, they are mostly here for reference
  45          */
  46         IIC_UNIT_SPU_0          = 0x4,
  47         IIC_UNIT_SPU_1          = 0x7,
  48         IIC_UNIT_SPU_2          = 0x3,
  49         IIC_UNIT_SPU_3          = 0x8,
  50         IIC_UNIT_SPU_4          = 0x2,
  51         IIC_UNIT_SPU_5          = 0x9,
  52         IIC_UNIT_SPU_6          = 0x1,
  53         IIC_UNIT_SPU_7          = 0xa,
  54         IIC_UNIT_IOC_0          = 0x0,
  55         IIC_UNIT_IOC_1          = 0xb,
  56         IIC_UNIT_THREAD_0       = 0xe, /* target only */
  57         IIC_UNIT_THREAD_1       = 0xf, /* target only */
  58         IIC_UNIT_IIC            = 0xe, /* source only (IO exceptions) */
  59
  60         /* Base numbers for the external interrupts */
  61         IIC_IRQ_EXT_IOIF0       =
  62                 IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_0,
  63         IIC_IRQ_EXT_IOIF1       =
  64                 IIC_IRQ_TYPE_NORMAL | IIC_IRQ_CLASS_2 | IIC_UNIT_IOC_1,
  65
  66         /* Base numbers for the IIC_ISR interrupts */
  67         IIC_IRQ_IOEX_TMI        = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 63,
  68         IIC_IRQ_IOEX_PMI        = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 62,
  69         IIC_IRQ_IOEX_ATI        = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 61,
  70         IIC_IRQ_IOEX_MATBFI     = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 60,
  71         IIC_IRQ_IOEX_ELDI       = IIC_IRQ_TYPE_IOEXC | IIC_IRQ_CLASS_1 | 59,
  72
  73         /* Which bits in IIC_ISR are edge sensitive */
  74         IIC_ISR_EDGE_MASK       = 0x4ul,
  75 };
  76
  77 extern void iic_init_IRQ(void);
  78 extern void iic_cause_IPI(int cpu, int mesg);
  79 extern void iic_request_IPIs(void);
  80 extern void iic_setup_cpu(void);
  81
  82 extern u8 iic_get_target_id(int cpu);
  83
  84 extern void spider_init_IRQ(void);
  85
  86 extern void iic_set_interrupt_routing(int cpu, int thread, int priority);
  87
  88 #endif
  89 #endif /* ASM_CELL_PIC_H */