git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-at91.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  *  Copyright (C) 2004 SAN People (Pty) Ltd.
   5  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   6  *
   7  * AT91RM9200 Bus Glue
   8  *
   9  * Based on fragments of 2.4 driver by Rick Bronson.
  10  * Based on ohci-omap.c
  11  *
  12  * This file is licenced under the GPL.
  13  */
  14
  15 #include <linux/clk.h>
  16 #include <linux/platform_device.h>
  17
  18 #include <asm/mach-types.h>
  19 #include <asm/hardware.h>
  20 #include <asm/arch/board.h>
  21
  22 #ifndef CONFIG_ARCH_AT91RM9200
  23 #error "This file is AT91RM9200 bus glue.  CONFIG_ARCH_AT91RM9200 must be defined."
  24 #endif
  25
  26 /* interface and function clocks */
  27 static struct clk *iclk, *fclk;
  28
  29 extern int usb_disabled(void);
  30
  31 /*-------------------------------------------------------------------------*/
  32
  33 static void at91_start_hc(struct platform_device *pdev)
  34 {
  35         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  36         struct ohci_regs __iomem *regs = hcd->regs;
  37
  38         dev_dbg(&pdev->dev, "starting AT91RM9200 OHCI USB Controller\n");
  39
  40         /*
  41          * Start the USB clocks.
  42          */
  43         clk_enable(iclk);
  44         clk_enable(fclk);
  45
  46         /*
  47          * The USB host controller must remain in reset.
  48          */
  49         writel(0, &regs->control);
  50 }
  51
  52 static void at91_stop_hc(struct platform_device *pdev)
  53 {
  54         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  55         struct ohci_regs __iomem *regs = hcd->regs;
  56
  57         dev_dbg(&pdev->dev, "stopping AT91RM9200 OHCI USB Controller\n");
  58
  59         /*
  60          * Put the USB host controller into reset.
  61          */
  62         writel(0, &regs->control);
  63
  64         /*
  65          * Stop the USB clocks.
  66          */
  67         clk_disable(fclk);
  68         clk_disable(iclk);
  69 }
  70
  71
  72 /*-------------------------------------------------------------------------*/
  73
  74 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  75
  76 /* configure so an HC device and id are always provided */
  77 /* always called with process context; sleeping is OK */
  78
  79
  80 /**
  81  * usb_hcd_at91_probe - initialize AT91RM9200-based HCDs
  82  * Context: !in_interrupt()
  83  *
  84  * Allocates basic resources for this USB host controller, and
  85  * then invokes the start() method for the HCD associated with it
  86  * through the hotplug entry's driver_data.
  87  *
  88  * Store this function in the HCD's struct pci_driver as probe().
  89  */
  90 int usb_hcd_at91_probe (const struct hc_driver *driver, struct platform_device *pdev)
  91 {
  92         int retval;
  93         struct usb_hcd *hcd = NULL;
  94
  95         if (pdev->num_resources != 2) {
  96                 pr_debug("hcd probe: invalid num_resources");
  97                 return -ENODEV;
  98         }
  99
 100         if ((pdev->resource[0].flags != IORESOURCE_MEM) || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
 101                 pr_debug("hcd probe: invalid resource type\n");
 102                 return -ENODEV;
 103         }
 104
 105         hcd = usb_create_hcd(driver, &pdev->dev, "at91rm9200");
 106         if (!hcd)
 107                 return -ENOMEM;
 108         hcd->rsrc_start = pdev->resource[0].start;
 109         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 110
 111         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 112                 pr_debug("request_mem_region failed\n");
 113                 retval = -EBUSY;
 114                 goto err1;
 115         }
 116
 117         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 118         if (!hcd->regs) {
 119                 pr_debug("ioremap failed\n");
 120                 retval = -EIO;
 121                 goto err2;
 122         }
 123
 124         iclk = clk_get(&pdev->dev, "ohci_clk");
 125         fclk = clk_get(&pdev->dev, "uhpck");
 126
 127         at91_start_hc(pdev);
 128         ohci_hcd_init(hcd_to_ohci(hcd));
 129
 130         retval = usb_add_hcd(hcd, pdev->resource[1].start, SA_INTERRUPT);
 131         if (retval == 0)
 132                 return retval;
 133
 134         /* Error handling */
 135         at91_stop_hc(pdev);
 136
 137         clk_put(fclk);
 138         clk_put(iclk);
 139
 140         iounmap(hcd->regs);
 141
 142  err2:
 143         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 144
 145  err1:
 146         usb_put_hcd(hcd);
 147         return retval;
 148 }
 149
 150
 151 /* may be called without controller electrically present */
 152 /* may be called with controller, bus, and devices active */
 153
 154 /**
 155  * usb_hcd_at91_remove - shutdown processing for AT91RM9200-based HCDs
 156  * @dev: USB Host Controller being removed
 157  * Context: !in_interrupt()
 158  *
 159  * Reverses the effect of usb_hcd_at91_probe(), first invoking
 160  * the HCD's stop() method.  It is always called from a thread
 161  * context, normally "rmmod", "apmd", or something similar.
 162  *
 163  */
 164 static int usb_hcd_at91_remove (struct usb_hcd *hcd, struct platform_device *pdev)
 165 {
 166         usb_remove_hcd(hcd);
 167         at91_stop_hc(pdev);
 168         iounmap(hcd->regs);
 169         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 170
 171         clk_put(fclk);
 172         clk_put(iclk);
 173         fclk = iclk = NULL;
 174
 175         dev_set_drvdata(&pdev->dev, NULL);
 176         return 0;
 177 }
 178
 179 /*-------------------------------------------------------------------------*/
 180
 181 static int __devinit
 182 ohci_at91_start (struct usb_hcd *hcd)
 183 {
 184 //      struct at91_ohci_data   *board = hcd->self.controller->platform_data;
 185         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 186         int                     ret;
 187
 188         if ((ret = ohci_init(ohci)) < 0)
 189                 return ret;
 190
 191         if ((ret = ohci_run(ohci)) < 0) {
 192                 err("can't start %s", hcd->self.bus_name);
 193                 ohci_stop(hcd);
 194                 return ret;
 195         }
 196 //      hcd->self.root_hub->maxchild = board->ports;
 197         return 0;
 198 }
 199
 200 /*-------------------------------------------------------------------------*/
 201
 202 static const struct hc_driver ohci_at91_hc_driver = {
 203         .description =          hcd_name,
 204         .product_desc =         "AT91RM9200 OHCI",
 205         .hcd_priv_size =        sizeof(struct ohci_hcd),
 206
 207         /*
 208          * generic hardware linkage
 209          */
 210         .irq =                  ohci_irq,
 211         .flags =                HCD_USB11 | HCD_MEMORY,
 212
 213         /*
 214          * basic lifecycle operations
 215          */
 216         .start =                ohci_at91_start,
 217         .stop =                 ohci_stop,
 218
 219         /*
 220          * managing i/o requests and associated device resources
 221          */
 222         .urb_enqueue =          ohci_urb_enqueue,
 223         .urb_dequeue =          ohci_urb_dequeue,
 224         .endpoint_disable =     ohci_endpoint_disable,
 225
 226         /*
 227          * scheduling support
 228          */
 229         .get_frame_number =     ohci_get_frame,
 230
 231         /*
 232          * root hub support
 233          */
 234         .hub_status_data =      ohci_hub_status_data,
 235         .hub_control =          ohci_hub_control,
 236
 237 #ifdef CONFIG_PM
 238         .hub_suspend =          ohci_hub_suspend,
 239         .hub_resume =           ohci_hub_resume,
 240 #endif
 241         .start_port_reset =     ohci_start_port_reset,
 242 };
 243
 244 /*-------------------------------------------------------------------------*/
 245
 246 static int ohci_hcd_at91_drv_probe(struct platform_device *dev)
 247 {
 248         return usb_hcd_at91_probe(&ohci_at91_hc_driver, dev);
 249 }
 250
 251 static int ohci_hcd_at91_drv_remove(struct platform_device *dev)
 252 {
 253         return usb_hcd_at91_remove(platform_get_drvdata(dev), dev);
 254 }
 255
 256 #ifdef CONFIG_PM
 257 static int ohci_hcd_at91_drv_suspend(struct platform_device *dev, u32 state, u32 level)
 258 {
 259         printk("%s(%s:%d): not implemented yet\n",
 260                 __func__, __FILE__, __LINE__);
 261
 262         clk_disable(fclk);
 263
 264         return 0;
 265 }
 266
 267 static int ohci_hcd_at91_drv_resume(struct platform_device *dev, u32 state)
 268 {
 269         printk("%s(%s:%d): not implemented yet\n",
 270                 __func__, __FILE__, __LINE__);
 271
 272         clk_enable(fclk);
 273
 274         return 0;
 275 }
 276 #else
 277 #define ohci_hcd_at91_drv_suspend NULL
 278 #define ohci_hcd_at91_drv_resume  NULL
 279 #endif
 280
 281 static struct platform_driver ohci_hcd_at91_driver = {
 282         .probe          = ohci_hcd_at91_drv_probe,
 283         .remove         = ohci_hcd_at91_drv_remove,
 284         .suspend        = ohci_hcd_at91_drv_suspend,
 285         .resume         = ohci_hcd_at91_drv_resume,
 286         .driver         = {
 287                 .name   = "at91rm9200-ohci",
 288                 .owner  = THIS_MODULE,
 289         },
 290 };
 291
 292 static int __init ohci_hcd_at91_init (void)
 293 {
 294         if (usb_disabled())
 295                 return -ENODEV;
 296
 297         return platform_driver_register(&ohci_hcd_at91_driver);
 298 }
 299
 300 static void __exit ohci_hcd_at91_cleanup (void)
 301 {
 302         platform_driver_unregister(&ohci_hcd_at91_driver);
 303 }
 304
 305 module_init (ohci_hcd_at91_init);
 306 module_exit (ohci_hcd_at91_cleanup);