git.oblomov.eu Git - linux-2.6/blob - drivers/char/ec3104_keyb.c

   1 /*
   2  * linux/drivers/char/ec3104_keyb.c
   3  *
   4  * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
   5  *
   6  * based on linux/drivers/char/pc_keyb.c, which had the following comments:
   7  *
   8  * Separation of the PC low-level part by Geert Uytterhoeven, May 1997
   9  * See keyboard.c for the whole history.
  10  *
  11  * Major cleanup by Martin Mares, May 1997
  12  *
  13  * Combined the keyboard and PS/2 mouse handling into one file,
  14  * because they share the same hardware.
  15  * Johan Myreen <jem@iki.fi> 1998-10-08.
  16  *
  17  * Code fixes to handle mouse ACKs properly.
  18  * C. Scott Ananian <cananian@alumni.princeton.edu> 1999-01-29.
  19  */
  20 /* EC3104 note:
  21  * This code was written without any documentation about the EC3104 chip.  While
  22  * I hope I got most of the basic functionality right, the register names I use
  23  * are most likely completely different from those in the chip documentation.
  24  *
  25  * If you have any further information about the EC3104, please tell me
  26  * (prumpf@tux.org).
  27  */
  28
  29
  30 #include <linux/spinlock.h>
  31 #include <linux/sched.h>
  32 #include <linux/interrupt.h>
  33 #include <linux/tty.h>
  34 #include <linux/mm.h>
  35 #include <linux/signal.h>
  36 #include <linux/init.h>
  37 #include <linux/kbd_ll.h>
  38 #include <linux/delay.h>
  39 #include <linux/random.h>
  40 #include <linux/poll.h>
  41 #include <linux/miscdevice.h>
  42 #include <linux/slab.h>
  43 #include <linux/kbd_kern.h>
  44 #include <linux/smp_lock.h>
  45 #include <linux/bitops.h>
  46
  47 #include <asm/keyboard.h>
  48 #include <asm/uaccess.h>
  49 #include <asm/irq.h>
  50 #include <asm/system.h>
  51 #include <asm/ec3104.h>
  52
  53 #include <asm/io.h>
  54
  55 /* Some configuration switches are present in the include file... */
  56
  57 #include <linux/pc_keyb.h>
  58
  59 #define MSR_CTS 0x10
  60 #define MCR_RTS 0x02
  61 #define LSR_DR 0x01
  62 #define LSR_BOTH_EMPTY 0x60
  63
  64 static struct e5_struct {
  65         u8 packet[8];
  66         int pos;
  67         int length;
  68
  69         u8 cached_mcr;
  70         u8 last_msr;
  71 } ec3104_keyb;
  72
  73 /* Simple translation table for the SysRq keys */
  74
  75
  76 #ifdef CONFIG_MAGIC_SYSRQ
  77 unsigned char ec3104_kbd_sysrq_xlate[128] =
  78         "\000\0331234567890-=\177\t"                    /* 0x00 - 0x0f */
  79         "qwertyuiop[]\r\000as"                          /* 0x10 - 0x1f */
  80         "dfghjkl;'`\000\\zxcv"                          /* 0x20 - 0x2f */
  81         "bnm,./\000*\000 \000\201\202\203\204\205"      /* 0x30 - 0x3f */
  82         "\206\207\210\211\212\000\000789-456+1"         /* 0x40 - 0x4f */
  83         "230\177\000\000\213\214\000\000\000\000\000\000\000\000\000\000" /* 0x50 - 0x5f */
  84         "\r\000/";                                      /* 0x60 - 0x6f */
  85 #endif
  86
  87 static void kbd_write_command_w(int data);
  88 static void kbd_write_output_w(int data);
  89 #ifdef CONFIG_PSMOUSE
  90 static void aux_write_ack(int val);
  91 static void __aux_write_ack(int val);
  92 #endif
  93
  94 static DEFINE_SPINLOCK(kbd_controller_lock);
  95 static unsigned char handle_kbd_event(void);
  96
  97 /* used only by send_data - set by keyboard_interrupt */
  98 static volatile unsigned char reply_expected;
  99 static volatile unsigned char acknowledge;
 100 static volatile unsigned char resend;
 101
 102
 103 int ec3104_kbd_setkeycode(unsigned int scancode, unsigned int keycode)
 104 {
 105         return 0;
 106 }
 107
 108 int ec3104_kbd_getkeycode(unsigned int scancode)
 109 {
 110         return 0;
 111 }
 112
 113
 114 /* yes, it probably would be faster to use an array.  I don't care. */
 115
 116 static inline unsigned char ec3104_scan2key(unsigned char scancode)
 117 {
 118         switch (scancode) {
 119         case  1: /* '`' */
 120                 return 41;
 121
 122         case  2 ... 27:
 123                 return scancode;
 124
 125         case 28: /* '\\' */
 126                 return 43;
 127
 128         case 29 ... 39:
 129                 return scancode + 1;
 130
 131         case 40: /* '\r' */
 132                 return 28;
 133
 134         case 41 ... 50:
 135                 return scancode + 3;
 136
 137         case 51: /* ' ' */
 138                 return 57;
 139
 140         case 52: /* escape */
 141                 return 1;
 142
 143         case 54: /* insert/delete (labelled delete) */
 144                 /* this should arguably be 110, but I'd like to have ctrl-alt-del
 145                  * working with a standard keymap */
 146                 return 111;
 147
 148         case 55: /* left */
 149                 return 105;
 150         case 56: /* home */
 151                 return 102;
 152         case 57: /* end */
 153                 return 107;
 154         case 58: /* up */
 155                 return 103;
 156         case 59: /* down */
 157                 return 108;
 158         case 60: /* pgup */
 159                 return 104;
 160         case 61: /* pgdown */
 161                 return 109;
 162         case 62: /* right */
 163                 return 106;
 164
 165         case 79 ... 88: /* f1 - f10 */
 166                 return scancode - 20;
 167
 168         case 89 ... 90: /* f11 - f12 */
 169                 return scancode - 2;
 170
 171         case 91: /* left shift */
 172                 return 42;
 173
 174         case 92: /* right shift */
 175                 return 54;
 176
 177         case 93: /* left alt */
 178                 return 56;
 179         case 94: /* right alt */
 180                 return 100;
 181         case 95: /* left ctrl */
 182                 return 29;
 183         case 96: /* right ctrl */
 184                 return 97;
 185
 186         case 97: /* caps lock */
 187                 return 58;
 188         case 102: /* left windows */
 189                 return 125;
 190         case 103: /* right windows */
 191                 return 126;
 192
 193         case 106: /* Fn */
 194                 /* this is wrong. */
 195                 return 84;
 196
 197         default:
 198                 return 0;
 199         }
 200 }
 201
 202 int ec3104_kbd_translate(unsigned char scancode, unsigned char *keycode,
 203                     char raw_mode)
 204 {
 205         scancode &= 0x7f;
 206
 207         *keycode = ec3104_scan2key(scancode);
 208
 209         return 1;
 210 }
 211
 212 char ec3104_kbd_unexpected_up(unsigned char keycode)
 213 {
 214         return 0200;
 215 }
 216
 217 static inline void handle_keyboard_event(unsigned char scancode)
 218 {
 219 #ifdef CONFIG_VT
 220         handle_scancode(scancode, !(scancode & 0x80));
 221 #endif
 222         tasklet_schedule(&keyboard_tasklet);
 223 }
 224
 225 void ec3104_kbd_leds(unsigned char leds)
 226 {
 227 }
 228
 229 static u8 e5_checksum(u8 *packet, int count)
 230 {
 231         int i;
 232         u8 sum = 0;
 233
 234         for (i=0; i<count; i++)
 235                 sum ^= packet[i];
 236
 237         if (sum & 0x80)
 238                 sum ^= 0xc0;
 239
 240         return sum;
 241 }
 242
 243 static void e5_wait_for_cts(struct e5_struct *k)
 244 {
 245         u8 msr;
 246
 247         do {
 248                 msr = ctrl_inb(EC3104_SER4_MSR);
 249         } while (!(msr & MSR_CTS));
 250 }
 251
 252
 253 static void e5_send_byte(u8 byte, struct e5_struct *k)
 254 {
 255         u8 status;
 256
 257         do {
 258                 status = ctrl_inb(EC3104_SER4_LSR);
 259         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 260
 261         printk("<%02x>", byte);
 262
 263         ctrl_outb(byte, EC3104_SER4_DATA);
 264
 265         do {
 266                 status = ctrl_inb(EC3104_SER4_LSR);
 267         } while ((status & LSR_BOTH_EMPTY) != LSR_BOTH_EMPTY);
 268
 269 }
 270
 271 static int e5_send_packet(u8 *packet, int count, struct e5_struct *k)
 272 {
 273         int i;
 274
 275         disable_irq(EC3104_IRQ_SER4);
 276
 277         if (k->cached_mcr & MCR_RTS) {
 278                 printk("e5_send_packet: too slow\n");
 279                 enable_irq(EC3104_IRQ_SER4);
 280                 return -EAGAIN;
 281         }
 282
 283         k->cached_mcr |= MCR_RTS;
 284         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 285
 286         e5_wait_for_cts(k);
 287
 288         printk("p: ");
 289
 290         for(i=0; i<count; i++)
 291                 e5_send_byte(packet[i], k);
 292
 293         e5_send_byte(e5_checksum(packet, count), k);
 294
 295         printk("\n");
 296
 297         udelay(1500);
 298
 299         k->cached_mcr &= ~MCR_RTS;
 300         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 301
 302         set_current_state(TASK_UNINTERRUPTIBLE);
 303
 304
 305
 306         enable_irq(EC3104_IRQ_SER4);
 307
 308
 309
 310         return 0;
 311 }
 312
 313 /*
 314  * E5 packets we know about:
 315  * E5->host 0x80 0x05 <checksum> - resend packet
 316  * host->E5 0x83 0x43 <contrast> - set LCD contrast
 317  * host->E5 0x85 0x41 0x02 <brightness> 0x02 - set LCD backlight
 318  * E5->host 0x87 <ps2 packet> 0x00 <checksum> - external PS2
 319  * E5->host 0x88 <scancode> <checksum> - key press
 320  */
 321
 322 static void e5_receive(struct e5_struct *k)
 323 {
 324         k->packet[k->pos++] = ctrl_inb(EC3104_SER4_DATA);
 325
 326         if (k->pos == 1) {
 327                 switch(k->packet[0]) {
 328                 case 0x80:
 329                         k->length = 3;
 330                         break;
 331
 332                 case 0x87: /* PS2 ext */
 333                         k->length = 6;
 334                         break;
 335
 336                 case 0x88: /* keyboard */
 337                         k->length = 3;
 338                         break;
 339
 340                 default:
 341                         k->length = 1;
 342                         printk(KERN_WARNING "unknown E5 packet %02x\n",
 343                                k->packet[0]);
 344                 }
 345         }
 346
 347         if (k->pos == k->length) {
 348                 int i;
 349
 350                 if (e5_checksum(k->packet, k->length) != 0)
 351                         printk(KERN_WARNING "E5: wrong checksum\n");
 352
 353 #if 0
 354                 printk("E5 packet [");
 355                 for(i=0; i<k->length; i++) {
 356                         printk("%02x ", k->packet[i]);
 357                 }
 358
 359                 printk("(%02x)]\n", e5_checksum(k->packet, k->length-1));
 360 #endif
 361
 362                 switch(k->packet[0]) {
 363                 case 0x80:
 364                 case 0x88:
 365                         handle_keyboard_event(k->packet[1]);
 366                         break;
 367                 }
 368
 369                 k->pos = k->length = 0;
 370         }
 371 }
 372
 373 static void ec3104_keyb_interrupt(int irq, void *data, struct pt_regs *regs)
 374 {
 375         struct e5_struct *k = &ec3104_keyb;
 376         u8 msr, lsr;
 377
 378         msr = ctrl_inb(EC3104_SER4_MSR);
 379
 380         if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 381                 if (k->cached_mcr & MCR_RTS)
 382                         printk("confused: RTS already high\n");
 383                 /* CTS went high.  Send RTS. */
 384                 k->cached_mcr |= MCR_RTS;
 385
 386                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 387         } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 388                 /* CTS went low. */
 389                 if (!(k->cached_mcr & MCR_RTS))
 390                         printk("confused: RTS already low\n");
 391
 392                 k->cached_mcr &= ~MCR_RTS;
 393
 394                 ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 395         }
 396
 397         k->last_msr = msr;
 398
 399         lsr = ctrl_inb(EC3104_SER4_LSR);
 400
 401         if (lsr & LSR_DR)
 402                 e5_receive(k);
 403 }
 404
 405 static void ec3104_keyb_clear_state(void)
 406 {
 407         struct e5_struct *k = &ec3104_keyb;
 408         u8 msr, lsr;
 409
 410         /* we want CTS to be low */
 411         k->last_msr = 0;
 412
 413         for (;;) {
 414                 msleep(100);
 415
 416                 msr = ctrl_inb(EC3104_SER4_MSR);
 417
 418                 lsr = ctrl_inb(EC3104_SER4_LSR);
 419
 420                 if (lsr & LSR_DR) {
 421                         e5_receive(k);
 422                         continue;
 423                 }
 424
 425                 if ((msr & MSR_CTS) && !(k->last_msr & MSR_CTS)) {
 426                         if (k->cached_mcr & MCR_RTS)
 427                                 printk("confused: RTS already high\n");
 428                         /* CTS went high.  Send RTS. */
 429                         k->cached_mcr |= MCR_RTS;
 430
 431                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 432                 } else if ((!(msr & MSR_CTS)) && (k->last_msr & MSR_CTS)) {
 433                         /* CTS went low. */
 434                         if (!(k->cached_mcr & MCR_RTS))
 435                                 printk("confused: RTS already low\n");
 436
 437                         k->cached_mcr &= ~MCR_RTS;
 438
 439                         ctrl_outb(k->cached_mcr, EC3104_SER4_MCR);
 440                 } else
 441                         break;
 442
 443                 k->last_msr = msr;
 444
 445                 continue;
 446         }
 447 }
 448
 449 void __init ec3104_kbd_init_hw(void)
 450 {
 451         ec3104_keyb.last_msr = ctrl_inb(EC3104_SER4_MSR);
 452         ec3104_keyb.cached_mcr = ctrl_inb(EC3104_SER4_MCR);
 453
 454         ec3104_keyb_clear_state();
 455
 456         /* Ok, finally allocate the IRQ, and off we go.. */
 457         request_irq(EC3104_IRQ_SER4, ec3104_keyb_interrupt, 0, "keyboard", NULL);
 458 }