2 * 64-bit pSeries and RS/6000 setup code.
4 * Copyright (C) 1995 Linus Torvalds
5 * Adapted from 'alpha' version by Gary Thomas
6 * Modified by Cort Dougan (cort@cs.nmt.edu)
7 * Modified by PPC64 Team, IBM Corp
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version
12 * 2 of the License, or (at your option) any later version.
16 * bootup setup stuff..
21 #include <linux/cpu.h>
22 #include <linux/errno.h>
23 #include <linux/sched.h>
24 #include <linux/kernel.h>
26 #include <linux/stddef.h>
27 #include <linux/unistd.h>
28 #include <linux/slab.h>
29 #include <linux/user.h>
30 #include <linux/a.out.h>
31 #include <linux/tty.h>
32 #include <linux/major.h>
33 #include <linux/interrupt.h>
34 #include <linux/reboot.h>
35 #include <linux/init.h>
36 #include <linux/ioport.h>
37 #include <linux/console.h>
38 #include <linux/pci.h>
39 #include <linux/utsname.h>
40 #include <linux/adb.h>
41 #include <linux/module.h>
42 #include <linux/delay.h>
43 #include <linux/irq.h>
44 #include <linux/seq_file.h>
45 #include <linux/root_dev.h>
48 #include <asm/processor.h>
50 #include <asm/pgtable.h>
53 #include <asm/pci-bridge.h>
54 #include <asm/iommu.h>
56 #include <asm/machdep.h>
58 #include <asm/kexec.h>
60 #include <asm/nvram.h>
64 #include <asm/ppc-pci.h>
65 #include <asm/i8259.h>
69 #include "plpar_wrappers.h"
74 #define DBG(fmt...) udbg_printf(fmt)
79 /* move those away to a .h */
80 extern void smp_init_pseries_mpic(void);
81 extern void smp_init_pseries_xics(void);
82 extern void find_udbg_vterm(void);
84 int fwnmi_active; /* TRUE if an FWNMI handler is present */
86 static void pseries_shared_idle_sleep(void);
87 static void pseries_dedicated_idle_sleep(void);
89 static struct device_node *pSeries_mpic_node;
91 static void pSeries_show_cpuinfo(struct seq_file *m)
93 struct device_node *root;
94 const char *model = "";
96 root = of_find_node_by_path("/");
98 model = get_property(root, "model", NULL);
99 seq_printf(m, "machine\t\t: CHRP %s\n", model);
103 /* Initialize firmware assisted non-maskable interrupts if
104 * the firmware supports this feature.
106 static void __init fwnmi_init(void)
108 unsigned long system_reset_addr, machine_check_addr;
110 int ibm_nmi_register = rtas_token("ibm,nmi-register");
111 if (ibm_nmi_register == RTAS_UNKNOWN_SERVICE)
114 /* If the kernel's not linked at zero we point the firmware at low
115 * addresses anyway, and use a trampoline to get to the real code. */
116 system_reset_addr = __pa(system_reset_fwnmi) - PHYSICAL_START;
117 machine_check_addr = __pa(machine_check_fwnmi) - PHYSICAL_START;
119 if (0 == rtas_call(ibm_nmi_register, 2, 1, NULL, system_reset_addr,
124 void pseries_8259_cascade(unsigned int irq, struct irq_desc *desc)
126 unsigned int cascade_irq = i8259_irq();
127 if (cascade_irq != NO_IRQ)
128 generic_handle_irq(cascade_irq);
129 desc->chip->eoi(irq);
132 static void __init pseries_mpic_init_IRQ(void)
134 struct device_node *np, *old, *cascade = NULL;
135 const unsigned int *addrp;
136 unsigned long intack = 0;
137 const unsigned int *opprop;
138 unsigned long openpic_addr = 0;
139 unsigned int cascade_irq;
140 int naddr, n, i, opplen;
143 np = of_find_node_by_path("/");
144 naddr = prom_n_addr_cells(np);
145 opprop = get_property(np, "platform-open-pic", &opplen);
147 openpic_addr = of_read_number(opprop, naddr);
148 printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr);
152 BUG_ON(openpic_addr == 0);
154 /* Setup the openpic driver */
155 mpic = mpic_alloc(pSeries_mpic_node, openpic_addr,
157 16, 250, /* isu size, irq count */
159 BUG_ON(mpic == NULL);
162 opplen /= sizeof(u32);
163 for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
164 unsigned long isuaddr = of_read_number(opprop + i, naddr);
165 mpic_assign_isu(mpic, n, isuaddr);
168 /* All ISUs are setup, complete initialization */
171 /* Look for cascade */
172 for_each_node_by_type(np, "interrupt-controller")
173 if (device_is_compatible(np, "chrp,iic")) {
180 cascade_irq = irq_of_parse_and_map(cascade, 0);
181 if (cascade == NO_IRQ) {
182 printk(KERN_ERR "mpic: failed to map cascade interrupt");
187 for (old = of_node_get(cascade); old != NULL ; old = np) {
188 np = of_get_parent(old);
192 if (strcmp(np->name, "pci") != 0)
194 addrp = get_property(np, "8259-interrupt-acknowledge",
198 naddr = prom_n_addr_cells(np);
199 intack = addrp[naddr-1];
201 intack |= ((unsigned long)addrp[naddr-2]) << 32;
204 printk(KERN_DEBUG "mpic: PCI 8259 intack at 0x%016lx\n",
206 i8259_init(cascade, intack);
207 of_node_put(cascade);
208 set_irq_chained_handler(cascade_irq, pseries_8259_cascade);
211 static void pseries_lpar_enable_pmcs(void)
213 unsigned long set, reset;
217 plpar_hcall_norets(H_PERFMON, set, reset);
219 /* instruct hypervisor to maintain PMCs */
220 if (firmware_has_feature(FW_FEATURE_SPLPAR))
221 get_lppaca()->pmcregs_in_use = 1;
225 static void pseries_kexec_cpu_down(int crash_shutdown, int secondary)
227 /* Don't risk a hypervisor call if we're crashing */
228 if (firmware_has_feature(FW_FEATURE_SPLPAR) && !crash_shutdown) {
231 addr = __pa(get_slb_shadow());
232 if (unregister_slb_shadow(hard_smp_processor_id(), addr))
233 printk("SLB shadow buffer deregistration of "
234 "cpu %u (hw_cpu_id %d) failed\n",
236 hard_smp_processor_id());
238 addr = __pa(get_lppaca());
239 if (unregister_vpa(hard_smp_processor_id(), addr)) {
240 printk("VPA deregistration of cpu %u (hw_cpu_id %d) "
241 "failed\n", smp_processor_id(),
242 hard_smp_processor_id());
247 static void pseries_kexec_cpu_down_mpic(int crash_shutdown, int secondary)
249 pseries_kexec_cpu_down(crash_shutdown, secondary);
250 mpic_teardown_this_cpu(secondary);
253 static void pseries_kexec_cpu_down_xics(int crash_shutdown, int secondary)
255 pseries_kexec_cpu_down(crash_shutdown, secondary);
256 xics_teardown_cpu(secondary);
258 #endif /* CONFIG_KEXEC */
260 static void __init pseries_discover_pic(void)
262 struct device_node *np;
265 for (np = NULL; (np = of_find_node_by_name(np,
266 "interrupt-controller"));) {
267 typep = get_property(np, "compatible", NULL);
268 if (strstr(typep, "open-pic")) {
269 pSeries_mpic_node = of_node_get(np);
270 ppc_md.init_IRQ = pseries_mpic_init_IRQ;
271 ppc_md.get_irq = mpic_get_irq;
273 ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_mpic;
276 smp_init_pseries_mpic();
279 } else if (strstr(typep, "ppc-xicp")) {
280 ppc_md.init_IRQ = xics_init_IRQ;
282 ppc_md.kexec_cpu_down = pseries_kexec_cpu_down_xics;
285 smp_init_pseries_xics();
290 printk(KERN_ERR "pSeries_discover_pic: failed to recognize"
291 " interrupt-controller\n");
294 static void __init pSeries_setup_arch(void)
296 /* Discover PIC type and setup ppc_md accordingly */
297 pseries_discover_pic();
299 /* openpic global configuration register (64-bit format). */
300 /* openpic Interrupt Source Unit pointer (64-bit format). */
301 /* python0 facility area (mmio) (64-bit format) REAL address. */
303 /* init to some ~sane value until calibrate_delay() runs */
304 loops_per_jiffy = 50000000;
307 printk("No ramdisk, default root is /dev/sda2\n");
308 ROOT_DEV = Root_SDA2;
313 /* Find and initialize PCI host bridges */
314 init_pci_config_tokens();
315 find_and_init_phbs();
318 pSeries_nvram_init();
320 /* Choose an idle loop */
321 if (firmware_has_feature(FW_FEATURE_SPLPAR)) {
322 vpa_init(boot_cpuid);
323 if (get_lppaca()->shared_proc) {
324 printk(KERN_DEBUG "Using shared processor idle loop\n");
325 ppc_md.power_save = pseries_shared_idle_sleep;
327 printk(KERN_DEBUG "Using dedicated idle loop\n");
328 ppc_md.power_save = pseries_dedicated_idle_sleep;
331 printk(KERN_DEBUG "Using default idle loop\n");
334 if (firmware_has_feature(FW_FEATURE_LPAR))
335 ppc_md.enable_pmcs = pseries_lpar_enable_pmcs;
337 ppc_md.enable_pmcs = power4_enable_pmcs;
340 static int __init pSeries_init_panel(void)
342 /* Manually leave the kernel version on the panel. */
343 ppc_md.progress("Linux ppc64\n", 0);
344 ppc_md.progress(init_utsname()->version, 0);
348 arch_initcall(pSeries_init_panel);
350 static int pseries_set_dabr(unsigned long dabr)
352 return plpar_hcall_norets(H_SET_DABR, dabr);
355 static int pseries_set_xdabr(unsigned long dabr)
357 /* We want to catch accesses from kernel and userspace */
358 return plpar_hcall_norets(H_SET_XDABR, dabr,
359 H_DABRX_KERNEL | H_DABRX_USER);
363 * Early initialization. Relocation is on but do not reference unbolted pages
365 static void __init pSeries_init_early(void)
367 DBG(" -> pSeries_init_early()\n");
371 if (firmware_has_feature(FW_FEATURE_LPAR))
374 if (firmware_has_feature(FW_FEATURE_DABR))
375 ppc_md.set_dabr = pseries_set_dabr;
376 else if (firmware_has_feature(FW_FEATURE_XDABR))
377 ppc_md.set_dabr = pseries_set_xdabr;
379 iommu_init_early_pSeries();
381 DBG(" <- pSeries_init_early()\n");
385 static int pSeries_check_legacy_ioport(unsigned int baseport)
387 struct device_node *np;
389 #define I8042_DATA_REG 0x60
390 #define FDC_BASE 0x3f0
395 np = of_find_node_by_type(NULL, "8042");
401 np = of_find_node_by_type(NULL, "fdc");
411 * Called very early, MMU is off, device-tree isn't unflattened
414 static int __init pSeries_probe_hypertas(unsigned long node,
415 const char *uname, int depth,
419 (strcmp(uname, "rtas") != 0 && strcmp(uname, "rtas@0") != 0))
422 if (of_get_flat_dt_prop(node, "ibm,hypertas-functions", NULL) != NULL)
423 powerpc_firmware_features |= FW_FEATURE_LPAR;
428 static int __init pSeries_probe(void)
430 unsigned long root = of_get_flat_dt_root();
431 char *dtype = of_get_flat_dt_prop(root, "device_type", NULL);
435 if (strcmp(dtype, "chrp"))
438 /* Cell blades firmware claims to be chrp while it's not. Until this
439 * is fixed, we need to avoid those here.
441 if (of_flat_dt_is_compatible(root, "IBM,CPBW-1.0") ||
442 of_flat_dt_is_compatible(root, "IBM,CBEA"))
445 DBG("pSeries detected, looking for LPAR capability...\n");
447 /* Now try to figure out if we are running on LPAR */
448 of_scan_flat_dt(pSeries_probe_hypertas, NULL);
450 if (firmware_has_feature(FW_FEATURE_LPAR))
455 DBG("Machine is%s LPAR !\n",
456 (powerpc_firmware_features & FW_FEATURE_LPAR) ? "" : " not");
462 DECLARE_PER_CPU(unsigned long, smt_snooze_delay);
464 static void pseries_dedicated_idle_sleep(void)
466 unsigned int cpu = smp_processor_id();
467 unsigned long start_snooze;
470 * Indicate to the HV that we are idle. Now would be
471 * a good time to find other work to dispatch.
473 get_lppaca()->idle = 1;
476 * We come in with interrupts disabled, and need_resched()
477 * has been checked recently. If we should poll for a little
480 if (__get_cpu_var(smt_snooze_delay)) {
481 start_snooze = get_tb() +
482 __get_cpu_var(smt_snooze_delay) * tb_ticks_per_usec;
484 set_thread_flag(TIF_POLLING_NRFLAG);
486 while (get_tb() < start_snooze) {
487 if (need_resched() || cpu_is_offline(cpu))
489 ppc64_runlatch_off();
495 clear_thread_flag(TIF_POLLING_NRFLAG);
498 if (need_resched() || cpu_is_offline(cpu))
506 get_lppaca()->idle = 0;
509 static void pseries_shared_idle_sleep(void)
512 * Indicate to the HV that we are idle. Now would be
513 * a good time to find other work to dispatch.
515 get_lppaca()->idle = 1;
518 * Yield the processor to the hypervisor. We return if
519 * an external interrupt occurs (which are driven prior
520 * to returning here) or if a prod occurs from another
521 * processor. When returning here, external interrupts
526 get_lppaca()->idle = 0;
529 static int pSeries_pci_probe_mode(struct pci_bus *bus)
531 if (firmware_has_feature(FW_FEATURE_LPAR))
532 return PCI_PROBE_DEVTREE;
533 return PCI_PROBE_NORMAL;
536 define_machine(pseries) {
538 .probe = pSeries_probe,
539 .setup_arch = pSeries_setup_arch,
540 .init_early = pSeries_init_early,
541 .show_cpuinfo = pSeries_show_cpuinfo,
542 .log_error = pSeries_log_error,
543 .pcibios_fixup = pSeries_final_fixup,
544 .pci_probe_mode = pSeries_pci_probe_mode,
545 .restart = rtas_restart,
546 .power_off = rtas_power_off,
548 .panic = rtas_os_term,
549 .get_boot_time = rtas_get_boot_time,
550 .get_rtc_time = rtas_get_rtc_time,
551 .set_rtc_time = rtas_set_rtc_time,
552 .calibrate_decr = generic_calibrate_decr,
553 .progress = rtas_progress,
554 .check_legacy_ioport = pSeries_check_legacy_ioport,
555 .system_reset_exception = pSeries_system_reset_exception,
556 .machine_check_exception = pSeries_machine_check_exception,
558 .machine_kexec = default_machine_kexec,
559 .machine_kexec_prepare = default_machine_kexec_prepare,
560 .machine_crash_shutdown = default_machine_crash_shutdown,