2 * linux/arch/arm/mach-omap2/timer-gp.c
4 * OMAP2 GP timer support.
6 * Update to use new clocksource/clockevent layers
7 * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
8 * Copyright (C) 2007 MontaVista Software, Inc.
11 * Copyright (C) 2005 Nokia Corporation
12 * Author: Paul Mundt <paul.mundt@nokia.com>
13 * Juha Yrjölä <juha.yrjola@nokia.com>
14 * OMAP Dual-mode timer framework support by Timo Teras
16 * Some parts based off of TI's 24xx code:
18 * Copyright (C) 2004 Texas Instruments, Inc.
20 * Roughly modelled after the OMAP1 MPU timer code.
22 * This file is subject to the terms and conditions of the GNU General Public
23 * License. See the file "COPYING" in the main directory of this archive
26 #include <linux/init.h>
27 #include <linux/time.h>
28 #include <linux/interrupt.h>
29 #include <linux/err.h>
30 #include <linux/clk.h>
31 #include <linux/delay.h>
32 #include <linux/irq.h>
33 #include <linux/clocksource.h>
34 #include <linux/clockchips.h>
36 #include <asm/mach/time.h>
37 #include <asm/arch/dmtimer.h>
39 static struct omap_dm_timer *gptimer;
40 static struct clock_event_device clockevent_gpt;
42 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
44 struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id;
45 struct clock_event_device *evt = &clockevent_gpt;
47 omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW);
49 evt->event_handler(evt);
53 static struct irqaction omap2_gp_timer_irq = {
55 .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
56 .handler = omap2_gp_timer_interrupt,
59 static int omap2_gp_timer_set_next_event(unsigned long cycles,
60 struct clock_event_device *evt)
62 omap_dm_timer_set_load(gptimer, 0, 0xffffffff - cycles);
63 omap_dm_timer_start(gptimer);
68 static void omap2_gp_timer_set_mode(enum clock_event_mode mode,
69 struct clock_event_device *evt)
73 omap_dm_timer_stop(gptimer);
76 case CLOCK_EVT_MODE_PERIODIC:
77 period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ;
80 omap_dm_timer_set_load(gptimer, 1, 0xffffffff - period);
81 omap_dm_timer_start(gptimer);
83 case CLOCK_EVT_MODE_ONESHOT:
85 case CLOCK_EVT_MODE_UNUSED:
86 case CLOCK_EVT_MODE_SHUTDOWN:
87 case CLOCK_EVT_MODE_RESUME:
92 static struct clock_event_device clockevent_gpt = {
94 .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
96 .set_next_event = omap2_gp_timer_set_next_event,
97 .set_mode = omap2_gp_timer_set_mode,
100 static void __init omap2_gp_clockevent_init(void)
104 gptimer = omap_dm_timer_request_specific(1);
105 BUG_ON(gptimer == NULL);
107 #if defined(CONFIG_OMAP_32K_TIMER)
108 omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
110 omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
112 tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
114 omap2_gp_timer_irq.dev_id = (void *)gptimer;
115 setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
116 omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
118 clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC,
119 clockevent_gpt.shift);
120 clockevent_gpt.max_delta_ns =
121 clockevent_delta2ns(0xffffffff, &clockevent_gpt);
122 clockevent_gpt.min_delta_ns =
123 clockevent_delta2ns(1, &clockevent_gpt);
125 clockevent_gpt.cpumask = cpumask_of_cpu(0);
126 clockevents_register_device(&clockevent_gpt);
129 #ifdef CONFIG_OMAP_32K_TIMER
131 * When 32k-timer is enabled, don't use GPTimer for clocksource
132 * instead, just leave default clocksource which uses the 32k
133 * sync counter. See clocksource setup in see plat-omap/common.c.
136 static inline void __init omap2_gp_clocksource_init(void) {}
141 static struct omap_dm_timer *gpt_clocksource;
142 static cycle_t clocksource_read_cycles(void)
144 return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource);
147 static struct clocksource clocksource_gpt = {
150 .read = clocksource_read_cycles,
151 .mask = CLOCKSOURCE_MASK(32),
153 .flags = CLOCK_SOURCE_IS_CONTINUOUS,
156 /* Setup free-running counter for clocksource */
157 static void __init omap2_gp_clocksource_init(void)
159 static struct omap_dm_timer *gpt;
160 u32 tick_rate, tick_period;
161 static char err1[] __initdata = KERN_ERR
162 "%s: failed to request dm-timer\n";
163 static char err2[] __initdata = KERN_ERR
164 "%s: can't register clocksource!\n";
166 gpt = omap_dm_timer_request();
168 printk(err1, clocksource_gpt.name);
169 gpt_clocksource = gpt;
171 omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK);
172 tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt));
173 tick_period = (tick_rate / HZ) - 1;
175 omap_dm_timer_set_load(gpt, 1, 0);
176 omap_dm_timer_start(gpt);
178 clocksource_gpt.mult =
179 clocksource_khz2mult(tick_rate/1000, clocksource_gpt.shift);
180 if (clocksource_register(&clocksource_gpt))
181 printk(err2, clocksource_gpt.name);
185 static void __init omap2_gp_timer_init(void)
187 omap_dm_timer_init();
189 omap2_gp_clockevent_init();
190 omap2_gp_clocksource_init();
193 struct sys_timer omap_timer = {
194 .init = omap2_gp_timer_init,