git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/powermac/low_i2c.c

   1 /*
   2  * arch/powerpc/platforms/powermac/low_i2c.c
   3  *
   4  *  Copyright (C) 2003-2005 Ben. Herrenschmidt (benh@kernel.crashing.org)
   5  *
   6  *  This program is free software; you can redistribute it and/or
   7  *  modify it under the terms of the GNU General Public License
   8  *  as published by the Free Software Foundation; either version
   9  *  2 of the License, or (at your option) any later version.
  10  *
  11  * The linux i2c layer isn't completely suitable for our needs for various
  12  * reasons ranging from too late initialisation to semantics not perfectly
  13  * matching some requirements of the apple platform functions etc...
  14  *
  15  * This file thus provides a simple low level unified i2c interface for
  16  * powermac that covers the various types of i2c busses used in Apple machines.
  17  * For now, keywest, PMU and SMU, though we could add Cuda, or other bit
  18  * banging busses found on older chipstes in earlier machines if we ever need
  19  * one of them.
  20  *
  21  * The drivers in this file are synchronous/blocking. In addition, the
  22  * keywest one is fairly slow due to the use of msleep instead of interrupts
  23  * as the interrupt is currently used by i2c-keywest. In the long run, we
  24  * might want to get rid of those high-level interfaces to linux i2c layer
  25  * either completely (converting all drivers) or replacing them all with a
  26  * single stub driver on top of this one. Once done, the interrupt will be
  27  * available for our use.
  28  */
  29
  30 #undef DEBUG
  31 #undef DEBUG_LOW
  32
  33 #include <linux/types.h>
  34 #include <linux/sched.h>
  35 #include <linux/init.h>
  36 #include <linux/module.h>
  37 #include <linux/adb.h>
  38 #include <linux/pmu.h>
  39 #include <linux/delay.h>
  40 #include <linux/completion.h>
  41 #include <linux/platform_device.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/timer.h>
  44 #include <linux/mutex.h>
  45 #include <asm/keylargo.h>
  46 #include <asm/uninorth.h>
  47 #include <asm/io.h>
  48 #include <asm/prom.h>
  49 #include <asm/machdep.h>
  50 #include <asm/smu.h>
  51 #include <asm/pmac_pfunc.h>
  52 #include <asm/pmac_low_i2c.h>
  53
  54 #ifdef DEBUG
  55 #define DBG(x...) do {\
  56                 printk(KERN_DEBUG "low_i2c:" x);        \
  57         } while(0)
  58 #else
  59 #define DBG(x...)
  60 #endif
  61
  62 #ifdef DEBUG_LOW
  63 #define DBG_LOW(x...) do {\
  64                 printk(KERN_DEBUG "low_i2c:" x);        \
  65         } while(0)
  66 #else
  67 #define DBG_LOW(x...)
  68 #endif
  69
  70
  71 static int pmac_i2c_force_poll = 1;
  72
  73 /*
  74  * A bus structure. Each bus in the system has such a structure associated.
  75  */
  76 struct pmac_i2c_bus
  77 {
  78         struct list_head        link;
  79         struct device_node      *controller;
  80         struct device_node      *busnode;
  81         int                     type;
  82         int                     flags;
  83         struct i2c_adapter      *adapter;
  84         void                    *hostdata;
  85         int                     channel;        /* some hosts have multiple */
  86         int                     mode;           /* current mode */
  87         struct mutex            mutex;
  88         int                     opened;
  89         int                     polled;         /* open mode */
  90         struct platform_device  *platform_dev;
  91
  92         /* ops */
  93         int (*open)(struct pmac_i2c_bus *bus);
  94         void (*close)(struct pmac_i2c_bus *bus);
  95         int (*xfer)(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
  96                     u32 subaddr, u8 *data, int len);
  97 };
  98
  99 static LIST_HEAD(pmac_i2c_busses);
 100
 101 /*
 102  * Keywest implementation
 103  */
 104
 105 struct pmac_i2c_host_kw
 106 {
 107         struct mutex            mutex;          /* Access mutex for use by
 108                                                  * i2c-keywest */
 109         void __iomem            *base;          /* register base address */
 110         int                     bsteps;         /* register stepping */
 111         int                     speed;          /* speed */
 112         int                     irq;
 113         u8                      *data;
 114         unsigned                len;
 115         int                     state;
 116         int                     rw;
 117         int                     polled;
 118         int                     result;
 119         struct completion       complete;
 120         spinlock_t              lock;
 121         struct timer_list       timeout_timer;
 122 };
 123
 124 /* Register indices */
 125 typedef enum {
 126         reg_mode = 0,
 127         reg_control,
 128         reg_status,
 129         reg_isr,
 130         reg_ier,
 131         reg_addr,
 132         reg_subaddr,
 133         reg_data
 134 } reg_t;
 135
 136 /* The Tumbler audio equalizer can be really slow sometimes */
 137 #define KW_POLL_TIMEOUT         (2*HZ)
 138
 139 /* Mode register */
 140 #define KW_I2C_MODE_100KHZ      0x00
 141 #define KW_I2C_MODE_50KHZ       0x01
 142 #define KW_I2C_MODE_25KHZ       0x02
 143 #define KW_I2C_MODE_DUMB        0x00
 144 #define KW_I2C_MODE_STANDARD    0x04
 145 #define KW_I2C_MODE_STANDARDSUB 0x08
 146 #define KW_I2C_MODE_COMBINED    0x0C
 147 #define KW_I2C_MODE_MODE_MASK   0x0C
 148 #define KW_I2C_MODE_CHAN_MASK   0xF0
 149
 150 /* Control register */
 151 #define KW_I2C_CTL_AAK          0x01
 152 #define KW_I2C_CTL_XADDR        0x02
 153 #define KW_I2C_CTL_STOP         0x04
 154 #define KW_I2C_CTL_START        0x08
 155
 156 /* Status register */
 157 #define KW_I2C_STAT_BUSY        0x01
 158 #define KW_I2C_STAT_LAST_AAK    0x02
 159 #define KW_I2C_STAT_LAST_RW     0x04
 160 #define KW_I2C_STAT_SDA         0x08
 161 #define KW_I2C_STAT_SCL         0x10
 162
 163 /* IER & ISR registers */
 164 #define KW_I2C_IRQ_DATA         0x01
 165 #define KW_I2C_IRQ_ADDR         0x02
 166 #define KW_I2C_IRQ_STOP         0x04
 167 #define KW_I2C_IRQ_START        0x08
 168 #define KW_I2C_IRQ_MASK         0x0F
 169
 170 /* State machine states */
 171 enum {
 172         state_idle,
 173         state_addr,
 174         state_read,
 175         state_write,
 176         state_stop,
 177         state_dead
 178 };
 179
 180 #define WRONG_STATE(name) do {\
 181                 printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
 182                        "(isr: %02x)\n", \
 183                        name, __kw_state_names[host->state], isr); \
 184         } while(0)
 185
 186 static const char *__kw_state_names[] = {
 187         "state_idle",
 188         "state_addr",
 189         "state_read",
 190         "state_write",
 191         "state_stop",
 192         "state_dead"
 193 };
 194
 195 static inline u8 __kw_read_reg(struct pmac_i2c_host_kw *host, reg_t reg)
 196 {
 197         return readb(host->base + (((unsigned int)reg) << host->bsteps));
 198 }
 199
 200 static inline void __kw_write_reg(struct pmac_i2c_host_kw *host,
 201                                   reg_t reg, u8 val)
 202 {
 203         writeb(val, host->base + (((unsigned)reg) << host->bsteps));
 204         (void)__kw_read_reg(host, reg_subaddr);
 205 }
 206
 207 #define kw_write_reg(reg, val)  __kw_write_reg(host, reg, val)
 208 #define kw_read_reg(reg)        __kw_read_reg(host, reg)
 209
 210 static u8 kw_i2c_wait_interrupt(struct pmac_i2c_host_kw *host)
 211 {
 212         int i, j;
 213         u8 isr;
 214
 215         for (i = 0; i < 1000; i++) {
 216                 isr = kw_read_reg(reg_isr) & KW_I2C_IRQ_MASK;
 217                 if (isr != 0)
 218                         return isr;
 219
 220                 /* This code is used with the timebase frozen, we cannot rely
 221                  * on udelay nor schedule when in polled mode !
 222                  * For now, just use a bogus loop....
 223                  */
 224                 if (host->polled) {
 225                         for (j = 1; j < 100000; j++)
 226                                 mb();
 227                 } else
 228                         msleep(1);
 229         }
 230         return isr;
 231 }
 232
 233 static void kw_i2c_do_stop(struct pmac_i2c_host_kw *host, int result)
 234 {
 235         kw_write_reg(reg_control, KW_I2C_CTL_STOP);
 236         host->state = state_stop;
 237         host->result = result;
 238 }
 239
 240
 241 static void kw_i2c_handle_interrupt(struct pmac_i2c_host_kw *host, u8 isr)
 242 {
 243         u8 ack;
 244
 245         DBG_LOW("kw_handle_interrupt(%s, isr: %x)\n",
 246                 __kw_state_names[host->state], isr);
 247
 248         if (host->state == state_idle) {
 249                 printk(KERN_WARNING "low_i2c: Keywest got an out of state"
 250                        " interrupt, ignoring\n");
 251                 kw_write_reg(reg_isr, isr);
 252                 return;
 253         }
 254
 255         if (isr == 0) {
 256                 printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
 257                        " on keywest !\n");
 258                 if (host->state != state_stop) {
 259                         kw_i2c_do_stop(host, -EIO);
 260                         return;
 261                 }
 262                 ack = kw_read_reg(reg_status);
 263                 if (ack & KW_I2C_STAT_BUSY)
 264                         kw_write_reg(reg_status, 0);
 265                 host->state = state_idle;
 266                 kw_write_reg(reg_ier, 0x00);
 267                 if (!host->polled)
 268                         complete(&host->complete);
 269                 return;
 270         }
 271
 272         if (isr & KW_I2C_IRQ_ADDR) {
 273                 ack = kw_read_reg(reg_status);
 274                 if (host->state != state_addr) {
 275                         WRONG_STATE("KW_I2C_IRQ_ADDR");
 276                         kw_i2c_do_stop(host, -EIO);
 277                 }
 278                 if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
 279                         host->result = -ENXIO;
 280                         host->state = state_stop;
 281                         DBG_LOW("KW: NAK on address\n");
 282                 } else {
 283                         if (host->len == 0)
 284                                 kw_i2c_do_stop(host, 0);
 285                         else if (host->rw) {
 286                                 host->state = state_read;
 287                                 if (host->len > 1)
 288                                         kw_write_reg(reg_control,
 289                                                      KW_I2C_CTL_AAK);
 290                         } else {
 291                                 host->state = state_write;
 292                                 kw_write_reg(reg_data, *(host->data++));
 293                                 host->len--;
 294                         }
 295                 }
 296                 kw_write_reg(reg_isr, KW_I2C_IRQ_ADDR);
 297         }
 298
 299         if (isr & KW_I2C_IRQ_DATA) {
 300                 if (host->state == state_read) {
 301                         *(host->data++) = kw_read_reg(reg_data);
 302                         host->len--;
 303                         kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 304                         if (host->len == 0)
 305                                 host->state = state_stop;
 306                         else if (host->len == 1)
 307                                 kw_write_reg(reg_control, 0);
 308                 } else if (host->state == state_write) {
 309                         ack = kw_read_reg(reg_status);
 310                         if ((ack & KW_I2C_STAT_LAST_AAK) == 0) {
 311                                 DBG_LOW("KW: nack on data write\n");
 312                                 host->result = -EFBIG;
 313                                 host->state = state_stop;
 314                         } else if (host->len) {
 315                                 kw_write_reg(reg_data, *(host->data++));
 316                                 host->len--;
 317                         } else
 318                                 kw_i2c_do_stop(host, 0);
 319                 } else {
 320                         WRONG_STATE("KW_I2C_IRQ_DATA");
 321                         if (host->state != state_stop)
 322                                 kw_i2c_do_stop(host, -EIO);
 323                 }
 324                 kw_write_reg(reg_isr, KW_I2C_IRQ_DATA);
 325         }
 326
 327         if (isr & KW_I2C_IRQ_STOP) {
 328                 kw_write_reg(reg_isr, KW_I2C_IRQ_STOP);
 329                 if (host->state != state_stop) {
 330                         WRONG_STATE("KW_I2C_IRQ_STOP");
 331                         host->result = -EIO;
 332                 }
 333                 host->state = state_idle;
 334                 if (!host->polled)
 335                         complete(&host->complete);
 336         }
 337
 338         /* Below should only happen in manual mode which we don't use ... */
 339         if (isr & KW_I2C_IRQ_START)
 340                 kw_write_reg(reg_isr, KW_I2C_IRQ_START);
 341
 342 }
 343
 344 /* Interrupt handler */
 345 static irqreturn_t kw_i2c_irq(int irq, void *dev_id)
 346 {
 347         struct pmac_i2c_host_kw *host = dev_id;
 348         unsigned long flags;
 349
 350         spin_lock_irqsave(&host->lock, flags);
 351         del_timer(&host->timeout_timer);
 352         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 353         if (host->state != state_idle) {
 354                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 355                 add_timer(&host->timeout_timer);
 356         }
 357         spin_unlock_irqrestore(&host->lock, flags);
 358         return IRQ_HANDLED;
 359 }
 360
 361 static void kw_i2c_timeout(unsigned long data)
 362 {
 363         struct pmac_i2c_host_kw *host = (struct pmac_i2c_host_kw *)data;
 364         unsigned long flags;
 365
 366         spin_lock_irqsave(&host->lock, flags);
 367         kw_i2c_handle_interrupt(host, kw_read_reg(reg_isr));
 368         if (host->state != state_idle) {
 369                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 370                 add_timer(&host->timeout_timer);
 371         }
 372         spin_unlock_irqrestore(&host->lock, flags);
 373 }
 374
 375 static int kw_i2c_open(struct pmac_i2c_bus *bus)
 376 {
 377         struct pmac_i2c_host_kw *host = bus->hostdata;
 378         mutex_lock(&host->mutex);
 379         return 0;
 380 }
 381
 382 static void kw_i2c_close(struct pmac_i2c_bus *bus)
 383 {
 384         struct pmac_i2c_host_kw *host = bus->hostdata;
 385         mutex_unlock(&host->mutex);
 386 }
 387
 388 static int kw_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 389                        u32 subaddr, u8 *data, int len)
 390 {
 391         struct pmac_i2c_host_kw *host = bus->hostdata;
 392         u8 mode_reg = host->speed;
 393         int use_irq = host->irq != NO_IRQ && !bus->polled;
 394
 395         /* Setup mode & subaddress if any */
 396         switch(bus->mode) {
 397         case pmac_i2c_mode_dumb:
 398                 return -EINVAL;
 399         case pmac_i2c_mode_std:
 400                 mode_reg |= KW_I2C_MODE_STANDARD;
 401                 if (subsize != 0)
 402                         return -EINVAL;
 403                 break;
 404         case pmac_i2c_mode_stdsub:
 405                 mode_reg |= KW_I2C_MODE_STANDARDSUB;
 406                 if (subsize != 1)
 407                         return -EINVAL;
 408                 break;
 409         case pmac_i2c_mode_combined:
 410                 mode_reg |= KW_I2C_MODE_COMBINED;
 411                 if (subsize != 1)
 412                         return -EINVAL;
 413                 break;
 414         }
 415
 416         /* Setup channel & clear pending irqs */
 417         kw_write_reg(reg_isr, kw_read_reg(reg_isr));
 418         kw_write_reg(reg_mode, mode_reg | (bus->channel << 4));
 419         kw_write_reg(reg_status, 0);
 420
 421         /* Set up address and r/w bit, strip possible stale bus number from
 422          * address top bits
 423          */
 424         kw_write_reg(reg_addr, addrdir & 0xff);
 425
 426         /* Set up the sub address */
 427         if ((mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB
 428             || (mode_reg & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED)
 429                 kw_write_reg(reg_subaddr, subaddr);
 430
 431         /* Prepare for async operations */
 432         host->data = data;
 433         host->len = len;
 434         host->state = state_addr;
 435         host->result = 0;
 436         host->rw = (addrdir & 1);
 437         host->polled = bus->polled;
 438
 439         /* Enable interrupt if not using polled mode and interrupt is
 440          * available
 441          */
 442         if (use_irq) {
 443                 /* Clear completion */
 444                 INIT_COMPLETION(host->complete);
 445                 /* Ack stale interrupts */
 446                 kw_write_reg(reg_isr, kw_read_reg(reg_isr));
 447                 /* Arm timeout */
 448                 host->timeout_timer.expires = jiffies + KW_POLL_TIMEOUT;
 449                 add_timer(&host->timeout_timer);
 450                 /* Enable emission */
 451                 kw_write_reg(reg_ier, KW_I2C_IRQ_MASK);
 452         }
 453
 454         /* Start sending address */
 455         kw_write_reg(reg_control, KW_I2C_CTL_XADDR);
 456
 457         /* Wait for completion */
 458         if (use_irq)
 459                 wait_for_completion(&host->complete);
 460         else {
 461                 while(host->state != state_idle) {
 462                         unsigned long flags;
 463
 464                         u8 isr = kw_i2c_wait_interrupt(host);
 465                         spin_lock_irqsave(&host->lock, flags);
 466                         kw_i2c_handle_interrupt(host, isr);
 467                         spin_unlock_irqrestore(&host->lock, flags);
 468                 }
 469         }
 470
 471         /* Disable emission */
 472         kw_write_reg(reg_ier, 0);
 473
 474         return host->result;
 475 }
 476
 477 static struct pmac_i2c_host_kw *__init kw_i2c_host_init(struct device_node *np)
 478 {
 479         struct pmac_i2c_host_kw *host;
 480         const u32               *psteps, *prate, *addrp;
 481         u32                     steps;
 482
 483         host = kzalloc(sizeof(struct pmac_i2c_host_kw), GFP_KERNEL);
 484         if (host == NULL) {
 485                 printk(KERN_ERR "low_i2c: Can't allocate host for %s\n",
 486                        np->full_name);
 487                 return NULL;
 488         }
 489
 490         /* Apple is kind enough to provide a valid AAPL,address property
 491          * on all i2c keywest nodes so far ... we would have to fallback
 492          * to macio parsing if that wasn't the case
 493          */
 494         addrp = of_get_property(np, "AAPL,address", NULL);
 495         if (addrp == NULL) {
 496                 printk(KERN_ERR "low_i2c: Can't find address for %s\n",
 497                        np->full_name);
 498                 kfree(host);
 499                 return NULL;
 500         }
 501         mutex_init(&host->mutex);
 502         init_completion(&host->complete);
 503         spin_lock_init(&host->lock);
 504         init_timer(&host->timeout_timer);
 505         host->timeout_timer.function = kw_i2c_timeout;
 506         host->timeout_timer.data = (unsigned long)host;
 507
 508         psteps = of_get_property(np, "AAPL,address-step", NULL);
 509         steps = psteps ? (*psteps) : 0x10;
 510         for (host->bsteps = 0; (steps & 0x01) == 0; host->bsteps++)
 511                 steps >>= 1;
 512         /* Select interface rate */
 513         host->speed = KW_I2C_MODE_25KHZ;
 514         prate = of_get_property(np, "AAPL,i2c-rate", NULL);
 515         if (prate) switch(*prate) {
 516         case 100:
 517                 host->speed = KW_I2C_MODE_100KHZ;
 518                 break;
 519         case 50:
 520                 host->speed = KW_I2C_MODE_50KHZ;
 521                 break;
 522         case 25:
 523                 host->speed = KW_I2C_MODE_25KHZ;
 524                 break;
 525         }
 526         host->irq = irq_of_parse_and_map(np, 0);
 527         if (host->irq == NO_IRQ)
 528                 printk(KERN_WARNING
 529                        "low_i2c: Failed to map interrupt for %s\n",
 530                        np->full_name);
 531
 532         host->base = ioremap((*addrp), 0x1000);
 533         if (host->base == NULL) {
 534                 printk(KERN_ERR "low_i2c: Can't map registers for %s\n",
 535                        np->full_name);
 536                 kfree(host);
 537                 return NULL;
 538         }
 539
 540         /* Make sure IRQ is disabled */
 541         kw_write_reg(reg_ier, 0);
 542
 543         /* Request chip interrupt */
 544         if (request_irq(host->irq, kw_i2c_irq, 0, "keywest i2c", host))
 545                 host->irq = NO_IRQ;
 546
 547         printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %s\n",
 548                *addrp, host->irq, np->full_name);
 549
 550         return host;
 551 }
 552
 553
 554 static void __init kw_i2c_add(struct pmac_i2c_host_kw *host,
 555                               struct device_node *controller,
 556                               struct device_node *busnode,
 557                               int channel)
 558 {
 559         struct pmac_i2c_bus *bus;
 560
 561         bus = kzalloc(sizeof(struct pmac_i2c_bus), GFP_KERNEL);
 562         if (bus == NULL)
 563                 return;
 564
 565         bus->controller = of_node_get(controller);
 566         bus->busnode = of_node_get(busnode);
 567         bus->type = pmac_i2c_bus_keywest;
 568         bus->hostdata = host;
 569         bus->channel = channel;
 570         bus->mode = pmac_i2c_mode_std;
 571         bus->open = kw_i2c_open;
 572         bus->close = kw_i2c_close;
 573         bus->xfer = kw_i2c_xfer;
 574         mutex_init(&bus->mutex);
 575         if (controller == busnode)
 576                 bus->flags = pmac_i2c_multibus;
 577         list_add(&bus->link, &pmac_i2c_busses);
 578
 579         printk(KERN_INFO " channel %d bus %s\n", channel,
 580                (controller == busnode) ? "<multibus>" : busnode->full_name);
 581 }
 582
 583 static void __init kw_i2c_probe(void)
 584 {
 585         struct device_node *np, *child, *parent;
 586
 587         /* Probe keywest-i2c busses */
 588         for_each_compatible_node(np, "i2c","keywest-i2c") {
 589                 struct pmac_i2c_host_kw *host;
 590                 int multibus, chans, i;
 591
 592                 /* Found one, init a host structure */
 593                 host = kw_i2c_host_init(np);
 594                 if (host == NULL)
 595                         continue;
 596
 597                 /* Now check if we have a multibus setup (old style) or if we
 598                  * have proper bus nodes. Note that the "new" way (proper bus
 599                  * nodes) might cause us to not create some busses that are
 600                  * kept hidden in the device-tree. In the future, we might
 601                  * want to work around that by creating busses without a node
 602                  * but not for now
 603                  */
 604                 child = of_get_next_child(np, NULL);
 605                 multibus = !child || strcmp(child->name, "i2c-bus");
 606                 of_node_put(child);
 607
 608                 /* For a multibus setup, we get the bus count based on the
 609                  * parent type
 610                  */
 611                 if (multibus) {
 612                         parent = of_get_parent(np);
 613                         if (parent == NULL)
 614                                 continue;
 615                         chans = parent->name[0] == 'u' ? 2 : 1;
 616                         for (i = 0; i < chans; i++)
 617                                 kw_i2c_add(host, np, np, i);
 618                 } else {
 619                         for (child = NULL;
 620                              (child = of_get_next_child(np, child)) != NULL;) {
 621                                 const u32 *reg = of_get_property(child,
 622                                                 "reg", NULL);
 623                                 if (reg == NULL)
 624                                         continue;
 625                                 kw_i2c_add(host, np, child, *reg);
 626                         }
 627                 }
 628         }
 629 }
 630
 631
 632 /*
 633  *
 634  * PMU implementation
 635  *
 636  */
 637
 638 #ifdef CONFIG_ADB_PMU
 639
 640 /*
 641  * i2c command block to the PMU
 642  */
 643 struct pmu_i2c_hdr {
 644         u8      bus;
 645         u8      mode;
 646         u8      bus2;
 647         u8      address;
 648         u8      sub_addr;
 649         u8      comb_addr;
 650         u8      count;
 651         u8      data[];
 652 };
 653
 654 static void pmu_i2c_complete(struct adb_request *req)
 655 {
 656         complete(req->arg);
 657 }
 658
 659 static int pmu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 660                         u32 subaddr, u8 *data, int len)
 661 {
 662         struct adb_request *req = bus->hostdata;
 663         struct pmu_i2c_hdr *hdr = (struct pmu_i2c_hdr *)&req->data[1];
 664         struct completion comp;
 665         int read = addrdir & 1;
 666         int retry;
 667         int rc = 0;
 668
 669         /* For now, limit ourselves to 16 bytes transfers */
 670         if (len > 16)
 671                 return -EINVAL;
 672
 673         init_completion(&comp);
 674
 675         for (retry = 0; retry < 16; retry++) {
 676                 memset(req, 0, sizeof(struct adb_request));
 677                 hdr->bus = bus->channel;
 678                 hdr->count = len;
 679
 680                 switch(bus->mode) {
 681                 case pmac_i2c_mode_std:
 682                         if (subsize != 0)
 683                                 return -EINVAL;
 684                         hdr->address = addrdir;
 685                         hdr->mode = PMU_I2C_MODE_SIMPLE;
 686                         break;
 687                 case pmac_i2c_mode_stdsub:
 688                 case pmac_i2c_mode_combined:
 689                         if (subsize != 1)
 690                                 return -EINVAL;
 691                         hdr->address = addrdir & 0xfe;
 692                         hdr->comb_addr = addrdir;
 693                         hdr->sub_addr = subaddr;
 694                         if (bus->mode == pmac_i2c_mode_stdsub)
 695                                 hdr->mode = PMU_I2C_MODE_STDSUB;
 696                         else
 697                                 hdr->mode = PMU_I2C_MODE_COMBINED;
 698                         break;
 699                 default:
 700                         return -EINVAL;
 701                 }
 702
 703                 INIT_COMPLETION(comp);
 704                 req->data[0] = PMU_I2C_CMD;
 705                 req->reply[0] = 0xff;
 706                 req->nbytes = sizeof(struct pmu_i2c_hdr) + 1;
 707                 req->done = pmu_i2c_complete;
 708                 req->arg = &comp;
 709                 if (!read && len) {
 710                         memcpy(hdr->data, data, len);
 711                         req->nbytes += len;
 712                 }
 713                 rc = pmu_queue_request(req);
 714                 if (rc)
 715                         return rc;
 716                 wait_for_completion(&comp);
 717                 if (req->reply[0] == PMU_I2C_STATUS_OK)
 718                         break;
 719                 msleep(15);
 720         }
 721         if (req->reply[0] != PMU_I2C_STATUS_OK)
 722                 return -EIO;
 723
 724         for (retry = 0; retry < 16; retry++) {
 725                 memset(req, 0, sizeof(struct adb_request));
 726
 727                 /* I know that looks like a lot, slow as hell, but darwin
 728                  * does it so let's be on the safe side for now
 729                  */
 730                 msleep(15);
 731
 732                 hdr->bus = PMU_I2C_BUS_STATUS;
 733
 734                 INIT_COMPLETION(comp);
 735                 req->data[0] = PMU_I2C_CMD;
 736                 req->reply[0] = 0xff;
 737                 req->nbytes = 2;
 738                 req->done = pmu_i2c_complete;
 739                 req->arg = &comp;
 740                 rc = pmu_queue_request(req);
 741                 if (rc)
 742                         return rc;
 743                 wait_for_completion(&comp);
 744
 745                 if (req->reply[0] == PMU_I2C_STATUS_OK && !read)
 746                         return 0;
 747                 if (req->reply[0] == PMU_I2C_STATUS_DATAREAD && read) {
 748                         int rlen = req->reply_len - 1;
 749
 750                         if (rlen != len) {
 751                                 printk(KERN_WARNING "low_i2c: PMU returned %d"
 752                                        " bytes, expected %d !\n", rlen, len);
 753                                 return -EIO;
 754                         }
 755                         if (len)
 756                                 memcpy(data, &req->reply[1], len);
 757                         return 0;
 758                 }
 759         }
 760         return -EIO;
 761 }
 762
 763 static void __init pmu_i2c_probe(void)
 764 {
 765         struct pmac_i2c_bus *bus;
 766         struct device_node *busnode;
 767         int channel, sz;
 768
 769         if (!pmu_present())
 770                 return;
 771
 772         /* There might or might not be a "pmu-i2c" node, we use that
 773          * or via-pmu itself, whatever we find. I haven't seen a machine
 774          * with separate bus nodes, so we assume a multibus setup
 775          */
 776         busnode = of_find_node_by_name(NULL, "pmu-i2c");
 777         if (busnode == NULL)
 778                 busnode = of_find_node_by_name(NULL, "via-pmu");
 779         if (busnode == NULL)
 780                 return;
 781
 782         printk(KERN_INFO "PMU i2c %s\n", busnode->full_name);
 783
 784         /*
 785          * We add bus 1 and 2 only for now, bus 0 is "special"
 786          */
 787         for (channel = 1; channel <= 2; channel++) {
 788                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct adb_request);
 789                 bus = kzalloc(sz, GFP_KERNEL);
 790                 if (bus == NULL)
 791                         return;
 792
 793                 bus->controller = busnode;
 794                 bus->busnode = busnode;
 795                 bus->type = pmac_i2c_bus_pmu;
 796                 bus->channel = channel;
 797                 bus->mode = pmac_i2c_mode_std;
 798                 bus->hostdata = bus + 1;
 799                 bus->xfer = pmu_i2c_xfer;
 800                 mutex_init(&bus->mutex);
 801                 bus->flags = pmac_i2c_multibus;
 802                 list_add(&bus->link, &pmac_i2c_busses);
 803
 804                 printk(KERN_INFO " channel %d bus <multibus>\n", channel);
 805         }
 806 }
 807
 808 #endif /* CONFIG_ADB_PMU */
 809
 810
 811 /*
 812  *
 813  * SMU implementation
 814  *
 815  */
 816
 817 #ifdef CONFIG_PMAC_SMU
 818
 819 static void smu_i2c_complete(struct smu_i2c_cmd *cmd, void *misc)
 820 {
 821         complete(misc);
 822 }
 823
 824 static int smu_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
 825                         u32 subaddr, u8 *data, int len)
 826 {
 827         struct smu_i2c_cmd *cmd = bus->hostdata;
 828         struct completion comp;
 829         int read = addrdir & 1;
 830         int rc = 0;
 831
 832         if ((read && len > SMU_I2C_READ_MAX) ||
 833             ((!read) && len > SMU_I2C_WRITE_MAX))
 834                 return -EINVAL;
 835
 836         memset(cmd, 0, sizeof(struct smu_i2c_cmd));
 837         cmd->info.bus = bus->channel;
 838         cmd->info.devaddr = addrdir;
 839         cmd->info.datalen = len;
 840
 841         switch(bus->mode) {
 842         case pmac_i2c_mode_std:
 843                 if (subsize != 0)
 844                         return -EINVAL;
 845                 cmd->info.type = SMU_I2C_TRANSFER_SIMPLE;
 846                 break;
 847         case pmac_i2c_mode_stdsub:
 848         case pmac_i2c_mode_combined:
 849                 if (subsize > 3 || subsize < 1)
 850                         return -EINVAL;
 851                 cmd->info.sublen = subsize;
 852                 /* that's big-endian only but heh ! */
 853                 memcpy(&cmd->info.subaddr, ((char *)&subaddr) + (4 - subsize),
 854                        subsize);
 855                 if (bus->mode == pmac_i2c_mode_stdsub)
 856                         cmd->info.type = SMU_I2C_TRANSFER_STDSUB;
 857                 else
 858                         cmd->info.type = SMU_I2C_TRANSFER_COMBINED;
 859                 break;
 860         default:
 861                 return -EINVAL;
 862         }
 863         if (!read && len)
 864                 memcpy(cmd->info.data, data, len);
 865
 866         init_completion(&comp);
 867         cmd->done = smu_i2c_complete;
 868         cmd->misc = &comp;
 869         rc = smu_queue_i2c(cmd);
 870         if (rc < 0)
 871                 return rc;
 872         wait_for_completion(&comp);
 873         rc = cmd->status;
 874
 875         if (read && len)
 876                 memcpy(data, cmd->info.data, len);
 877         return rc < 0 ? rc : 0;
 878 }
 879
 880 static void __init smu_i2c_probe(void)
 881 {
 882         struct device_node *controller, *busnode;
 883         struct pmac_i2c_bus *bus;
 884         const u32 *reg;
 885         int sz;
 886
 887         if (!smu_present())
 888                 return;
 889
 890         controller = of_find_node_by_name(NULL, "smu-i2c-control");
 891         if (controller == NULL)
 892                 controller = of_find_node_by_name(NULL, "smu");
 893         if (controller == NULL)
 894                 return;
 895
 896         printk(KERN_INFO "SMU i2c %s\n", controller->full_name);
 897
 898         /* Look for childs, note that they might not be of the right
 899          * type as older device trees mix i2c busses and other thigns
 900          * at the same level
 901          */
 902         for (busnode = NULL;
 903              (busnode = of_get_next_child(controller, busnode)) != NULL;) {
 904                 if (strcmp(busnode->type, "i2c") &&
 905                     strcmp(busnode->type, "i2c-bus"))
 906                         continue;
 907                 reg = of_get_property(busnode, "reg", NULL);
 908                 if (reg == NULL)
 909                         continue;
 910
 911                 sz = sizeof(struct pmac_i2c_bus) + sizeof(struct smu_i2c_cmd);
 912                 bus = kzalloc(sz, GFP_KERNEL);
 913                 if (bus == NULL)
 914                         return;
 915
 916                 bus->controller = controller;
 917                 bus->busnode = of_node_get(busnode);
 918                 bus->type = pmac_i2c_bus_smu;
 919                 bus->channel = *reg;
 920                 bus->mode = pmac_i2c_mode_std;
 921                 bus->hostdata = bus + 1;
 922                 bus->xfer = smu_i2c_xfer;
 923                 mutex_init(&bus->mutex);
 924                 bus->flags = 0;
 925                 list_add(&bus->link, &pmac_i2c_busses);
 926
 927                 printk(KERN_INFO " channel %x bus %s\n",
 928                        bus->channel, busnode->full_name);
 929         }
 930 }
 931
 932 #endif /* CONFIG_PMAC_SMU */
 933
 934 /*
 935  *
 936  * Core code
 937  *
 938  */
 939
 940
 941 struct pmac_i2c_bus *pmac_i2c_find_bus(struct device_node *node)
 942 {
 943         struct device_node *p = of_node_get(node);
 944         struct device_node *prev = NULL;
 945         struct pmac_i2c_bus *bus;
 946
 947         while(p) {
 948                 list_for_each_entry(bus, &pmac_i2c_busses, link) {
 949                         if (p == bus->busnode) {
 950                                 if (prev && bus->flags & pmac_i2c_multibus) {
 951                                         const u32 *reg;
 952                                         reg = of_get_property(prev, "reg",
 953                                                                 NULL);
 954                                         if (!reg)
 955                                                 continue;
 956                                         if (((*reg) >> 8) != bus->channel)
 957                                                 continue;
 958                                 }
 959                                 of_node_put(p);
 960                                 of_node_put(prev);
 961                                 return bus;
 962                         }
 963                 }
 964                 of_node_put(prev);
 965                 prev = p;
 966                 p = of_get_parent(p);
 967         }
 968         return NULL;
 969 }
 970 EXPORT_SYMBOL_GPL(pmac_i2c_find_bus);
 971
 972 u8 pmac_i2c_get_dev_addr(struct device_node *device)
 973 {
 974         const u32 *reg = of_get_property(device, "reg", NULL);
 975
 976         if (reg == NULL)
 977                 return 0;
 978
 979         return (*reg) & 0xff;
 980 }
 981 EXPORT_SYMBOL_GPL(pmac_i2c_get_dev_addr);
 982
 983 struct device_node *pmac_i2c_get_controller(struct pmac_i2c_bus *bus)
 984 {
 985         return bus->controller;
 986 }
 987 EXPORT_SYMBOL_GPL(pmac_i2c_get_controller);
 988
 989 struct device_node *pmac_i2c_get_bus_node(struct pmac_i2c_bus *bus)
 990 {
 991         return bus->busnode;
 992 }
 993 EXPORT_SYMBOL_GPL(pmac_i2c_get_bus_node);
 994
 995 int pmac_i2c_get_type(struct pmac_i2c_bus *bus)
 996 {
 997         return bus->type;
 998 }
 999 EXPORT_SYMBOL_GPL(pmac_i2c_get_type);
1000
1001 int pmac_i2c_get_flags(struct pmac_i2c_bus *bus)
1002 {
1003         return bus->flags;
1004 }
1005 EXPORT_SYMBOL_GPL(pmac_i2c_get_flags);
1006
1007 int pmac_i2c_get_channel(struct pmac_i2c_bus *bus)
1008 {
1009         return bus->channel;
1010 }
1011 EXPORT_SYMBOL_GPL(pmac_i2c_get_channel);
1012
1013
1014 void pmac_i2c_attach_adapter(struct pmac_i2c_bus *bus,
1015                              struct i2c_adapter *adapter)
1016 {
1017         WARN_ON(bus->adapter != NULL);
1018         bus->adapter = adapter;
1019 }
1020 EXPORT_SYMBOL_GPL(pmac_i2c_attach_adapter);
1021
1022 void pmac_i2c_detach_adapter(struct pmac_i2c_bus *bus,
1023                              struct i2c_adapter *adapter)
1024 {
1025         WARN_ON(bus->adapter != adapter);
1026         bus->adapter = NULL;
1027 }
1028 EXPORT_SYMBOL_GPL(pmac_i2c_detach_adapter);
1029
1030 struct i2c_adapter *pmac_i2c_get_adapter(struct pmac_i2c_bus *bus)
1031 {
1032         return bus->adapter;
1033 }
1034 EXPORT_SYMBOL_GPL(pmac_i2c_get_adapter);
1035
1036 struct pmac_i2c_bus *pmac_i2c_adapter_to_bus(struct i2c_adapter *adapter)
1037 {
1038         struct pmac_i2c_bus *bus;
1039
1040         list_for_each_entry(bus, &pmac_i2c_busses, link)
1041                 if (bus->adapter == adapter)
1042                         return bus;
1043         return NULL;
1044 }
1045 EXPORT_SYMBOL_GPL(pmac_i2c_adapter_to_bus);
1046
1047 int pmac_i2c_match_adapter(struct device_node *dev, struct i2c_adapter *adapter)
1048 {
1049         struct pmac_i2c_bus *bus = pmac_i2c_find_bus(dev);
1050
1051         if (bus == NULL)
1052                 return 0;
1053         return (bus->adapter == adapter);
1054 }
1055 EXPORT_SYMBOL_GPL(pmac_i2c_match_adapter);
1056
1057 int pmac_low_i2c_lock(struct device_node *np)
1058 {
1059         struct pmac_i2c_bus *bus, *found = NULL;
1060
1061         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1062                 if (np == bus->controller) {
1063                         found = bus;
1064                         break;
1065                 }
1066         }
1067         if (!found)
1068                 return -ENODEV;
1069         return pmac_i2c_open(bus, 0);
1070 }
1071 EXPORT_SYMBOL_GPL(pmac_low_i2c_lock);
1072
1073 int pmac_low_i2c_unlock(struct device_node *np)
1074 {
1075         struct pmac_i2c_bus *bus, *found = NULL;
1076
1077         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1078                 if (np == bus->controller) {
1079                         found = bus;
1080                         break;
1081                 }
1082         }
1083         if (!found)
1084                 return -ENODEV;
1085         pmac_i2c_close(bus);
1086         return 0;
1087 }
1088 EXPORT_SYMBOL_GPL(pmac_low_i2c_unlock);
1089
1090
1091 int pmac_i2c_open(struct pmac_i2c_bus *bus, int polled)
1092 {
1093         int rc;
1094
1095         mutex_lock(&bus->mutex);
1096         bus->polled = polled || pmac_i2c_force_poll;
1097         bus->opened = 1;
1098         bus->mode = pmac_i2c_mode_std;
1099         if (bus->open && (rc = bus->open(bus)) != 0) {
1100                 bus->opened = 0;
1101                 mutex_unlock(&bus->mutex);
1102                 return rc;
1103         }
1104         return 0;
1105 }
1106 EXPORT_SYMBOL_GPL(pmac_i2c_open);
1107
1108 void pmac_i2c_close(struct pmac_i2c_bus *bus)
1109 {
1110         WARN_ON(!bus->opened);
1111         if (bus->close)
1112                 bus->close(bus);
1113         bus->opened = 0;
1114         mutex_unlock(&bus->mutex);
1115 }
1116 EXPORT_SYMBOL_GPL(pmac_i2c_close);
1117
1118 int pmac_i2c_setmode(struct pmac_i2c_bus *bus, int mode)
1119 {
1120         WARN_ON(!bus->opened);
1121
1122         /* Report me if you see the error below as there might be a new
1123          * "combined4" mode that I need to implement for the SMU bus
1124          */
1125         if (mode < pmac_i2c_mode_dumb || mode > pmac_i2c_mode_combined) {
1126                 printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
1127                        " bus %s !\n", mode, bus->busnode->full_name);
1128                 return -EINVAL;
1129         }
1130         bus->mode = mode;
1131
1132         return 0;
1133 }
1134 EXPORT_SYMBOL_GPL(pmac_i2c_setmode);
1135
1136 int pmac_i2c_xfer(struct pmac_i2c_bus *bus, u8 addrdir, int subsize,
1137                   u32 subaddr, u8 *data, int len)
1138 {
1139         int rc;
1140
1141         WARN_ON(!bus->opened);
1142
1143         DBG("xfer() chan=%d, addrdir=0x%x, mode=%d, subsize=%d, subaddr=0x%x,"
1144             " %d bytes, bus %s\n", bus->channel, addrdir, bus->mode, subsize,
1145             subaddr, len, bus->busnode->full_name);
1146
1147         rc = bus->xfer(bus, addrdir, subsize, subaddr, data, len);
1148
1149 #ifdef DEBUG
1150         if (rc)
1151                 DBG("xfer error %d\n", rc);
1152 #endif
1153         return rc;
1154 }
1155 EXPORT_SYMBOL_GPL(pmac_i2c_xfer);
1156
1157 /* some quirks for platform function decoding */
1158 enum {
1159         pmac_i2c_quirk_invmask = 0x00000001u,
1160         pmac_i2c_quirk_skip = 0x00000002u,
1161 };
1162
1163 static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
1164                                               int quirks))
1165 {
1166         struct pmac_i2c_bus *bus;
1167         struct device_node *np;
1168         static struct whitelist_ent {
1169                 char *name;
1170                 char *compatible;
1171                 int quirks;
1172         } whitelist[] = {
1173                 /* XXX Study device-tree's & apple drivers are get the quirks
1174                  * right !
1175                  */
1176                 /* Workaround: It seems that running the clockspreading
1177                  * properties on the eMac will cause lockups during boot.
1178                  * The machine seems to work fine without that. So for now,
1179                  * let's make sure i2c-hwclock doesn't match about "imic"
1180                  * clocks and we'll figure out if we really need to do
1181                  * something special about those later.
1182                  */
1183                 { "i2c-hwclock", "imic5002", pmac_i2c_quirk_skip },
1184                 { "i2c-hwclock", "imic5003", pmac_i2c_quirk_skip },
1185                 { "i2c-hwclock", NULL, pmac_i2c_quirk_invmask },
1186                 { "i2c-cpu-voltage", NULL, 0},
1187                 {  "temp-monitor", NULL, 0 },
1188                 {  "supply-monitor", NULL, 0 },
1189                 { NULL, NULL, 0 },
1190         };
1191
1192         /* Only some devices need to have platform functions instanciated
1193          * here. For now, we have a table. Others, like 9554 i2c GPIOs used
1194          * on Xserve, if we ever do a driver for them, will use their own
1195          * platform function instance
1196          */
1197         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1198                 for (np = NULL;
1199                      (np = of_get_next_child(bus->busnode, np)) != NULL;) {
1200                         struct whitelist_ent *p;
1201                         /* If multibus, check if device is on that bus */
1202                         if (bus->flags & pmac_i2c_multibus)
1203                                 if (bus != pmac_i2c_find_bus(np))
1204                                         continue;
1205                         for (p = whitelist; p->name != NULL; p++) {
1206                                 if (strcmp(np->name, p->name))
1207                                         continue;
1208                                 if (p->compatible &&
1209                                     !of_device_is_compatible(np, p->compatible))
1210                                         continue;
1211                                 if (p->quirks & pmac_i2c_quirk_skip)
1212                                         break;
1213                                 callback(np, p->quirks);
1214                                 break;
1215                         }
1216                 }
1217         }
1218 }
1219
1220 #define MAX_I2C_DATA    64
1221
1222 struct pmac_i2c_pf_inst
1223 {
1224         struct pmac_i2c_bus     *bus;
1225         u8                      addr;
1226         u8                      buffer[MAX_I2C_DATA];
1227         u8                      scratch[MAX_I2C_DATA];
1228         int                     bytes;
1229         int                     quirks;
1230 };
1231
1232 static void* pmac_i2c_do_begin(struct pmf_function *func, struct pmf_args *args)
1233 {
1234         struct pmac_i2c_pf_inst *inst;
1235         struct pmac_i2c_bus     *bus;
1236
1237         bus = pmac_i2c_find_bus(func->node);
1238         if (bus == NULL) {
1239                 printk(KERN_ERR "low_i2c: Can't find bus for %s (pfunc)\n",
1240                        func->node->full_name);
1241                 return NULL;
1242         }
1243         if (pmac_i2c_open(bus, 0)) {
1244                 printk(KERN_ERR "low_i2c: Can't open i2c bus for %s (pfunc)\n",
1245                        func->node->full_name);
1246                 return NULL;
1247         }
1248
1249         /* XXX might need GFP_ATOMIC when called during the suspend process,
1250          * but then, there are already lots of issues with suspending when
1251          * near OOM that need to be resolved, the allocator itself should
1252          * probably make GFP_NOIO implicit during suspend
1253          */
1254         inst = kzalloc(sizeof(struct pmac_i2c_pf_inst), GFP_KERNEL);
1255         if (inst == NULL) {
1256                 pmac_i2c_close(bus);
1257                 return NULL;
1258         }
1259         inst->bus = bus;
1260         inst->addr = pmac_i2c_get_dev_addr(func->node);
1261         inst->quirks = (int)(long)func->driver_data;
1262         return inst;
1263 }
1264
1265 static void pmac_i2c_do_end(struct pmf_function *func, void *instdata)
1266 {
1267         struct pmac_i2c_pf_inst *inst = instdata;
1268
1269         if (inst == NULL)
1270                 return;
1271         pmac_i2c_close(inst->bus);
1272         if (inst)
1273                 kfree(inst);
1274 }
1275
1276 static int pmac_i2c_do_read(PMF_STD_ARGS, u32 len)
1277 {
1278         struct pmac_i2c_pf_inst *inst = instdata;
1279
1280         inst->bytes = len;
1281         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 0, 0,
1282                              inst->buffer, len);
1283 }
1284
1285 static int pmac_i2c_do_write(PMF_STD_ARGS, u32 len, const u8 *data)
1286 {
1287         struct pmac_i2c_pf_inst *inst = instdata;
1288
1289         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1290                              (u8 *)data, len);
1291 }
1292
1293 /* This function is used to do the masking & OR'ing for the "rmw" type
1294  * callbacks. Ze should apply the mask and OR in the values in the
1295  * buffer before writing back. The problem is that it seems that
1296  * various darwin drivers implement the mask/or differently, thus
1297  * we need to check the quirks first
1298  */
1299 static void pmac_i2c_do_apply_rmw(struct pmac_i2c_pf_inst *inst,
1300                                   u32 len, const u8 *mask, const u8 *val)
1301 {
1302         int i;
1303
1304         if (inst->quirks & pmac_i2c_quirk_invmask) {
1305                 for (i = 0; i < len; i ++)
1306                         inst->scratch[i] = (inst->buffer[i] & mask[i]) | val[i];
1307         } else {
1308                 for (i = 0; i < len; i ++)
1309                         inst->scratch[i] = (inst->buffer[i] & ~mask[i])
1310                                 | (val[i] & mask[i]);
1311         }
1312 }
1313
1314 static int pmac_i2c_do_rmw(PMF_STD_ARGS, u32 masklen, u32 valuelen,
1315                            u32 totallen, const u8 *maskdata,
1316                            const u8 *valuedata)
1317 {
1318         struct pmac_i2c_pf_inst *inst = instdata;
1319
1320         if (masklen > inst->bytes || valuelen > inst->bytes ||
1321             totallen > inst->bytes || valuelen > masklen)
1322                 return -EINVAL;
1323
1324         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1325
1326         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 0, 0,
1327                              inst->scratch, totallen);
1328 }
1329
1330 static int pmac_i2c_do_read_sub(PMF_STD_ARGS, u8 subaddr, u32 len)
1331 {
1332         struct pmac_i2c_pf_inst *inst = instdata;
1333
1334         inst->bytes = len;
1335         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_read, 1, subaddr,
1336                              inst->buffer, len);
1337 }
1338
1339 static int pmac_i2c_do_write_sub(PMF_STD_ARGS, u8 subaddr, u32 len,
1340                                      const u8 *data)
1341 {
1342         struct pmac_i2c_pf_inst *inst = instdata;
1343
1344         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1345                              subaddr, (u8 *)data, len);
1346 }
1347
1348 static int pmac_i2c_do_set_mode(PMF_STD_ARGS, int mode)
1349 {
1350         struct pmac_i2c_pf_inst *inst = instdata;
1351
1352         return pmac_i2c_setmode(inst->bus, mode);
1353 }
1354
1355 static int pmac_i2c_do_rmw_sub(PMF_STD_ARGS, u8 subaddr, u32 masklen,
1356                                u32 valuelen, u32 totallen, const u8 *maskdata,
1357                                const u8 *valuedata)
1358 {
1359         struct pmac_i2c_pf_inst *inst = instdata;
1360
1361         if (masklen > inst->bytes || valuelen > inst->bytes ||
1362             totallen > inst->bytes || valuelen > masklen)
1363                 return -EINVAL;
1364
1365         pmac_i2c_do_apply_rmw(inst, masklen, maskdata, valuedata);
1366
1367         return pmac_i2c_xfer(inst->bus, inst->addr | pmac_i2c_write, 1,
1368                              subaddr, inst->scratch, totallen);
1369 }
1370
1371 static int pmac_i2c_do_mask_and_comp(PMF_STD_ARGS, u32 len,
1372                                      const u8 *maskdata,
1373                                      const u8 *valuedata)
1374 {
1375         struct pmac_i2c_pf_inst *inst = instdata;
1376         int i, match;
1377
1378         /* Get return value pointer, it's assumed to be a u32 */
1379         if (!args || !args->count || !args->u[0].p)
1380                 return -EINVAL;
1381
1382         /* Check buffer */
1383         if (len > inst->bytes)
1384                 return -EINVAL;
1385
1386         for (i = 0, match = 1; match && i < len; i ++)
1387                 if ((inst->buffer[i] & maskdata[i]) != valuedata[i])
1388                         match = 0;
1389         *args->u[0].p = match;
1390         return 0;
1391 }
1392
1393 static int pmac_i2c_do_delay(PMF_STD_ARGS, u32 duration)
1394 {
1395         msleep((duration + 999) / 1000);
1396         return 0;
1397 }
1398
1399
1400 static struct pmf_handlers pmac_i2c_pfunc_handlers = {
1401         .begin                  = pmac_i2c_do_begin,
1402         .end                    = pmac_i2c_do_end,
1403         .read_i2c               = pmac_i2c_do_read,
1404         .write_i2c              = pmac_i2c_do_write,
1405         .rmw_i2c                = pmac_i2c_do_rmw,
1406         .read_i2c_sub           = pmac_i2c_do_read_sub,
1407         .write_i2c_sub          = pmac_i2c_do_write_sub,
1408         .rmw_i2c_sub            = pmac_i2c_do_rmw_sub,
1409         .set_i2c_mode           = pmac_i2c_do_set_mode,
1410         .mask_and_compare       = pmac_i2c_do_mask_and_comp,
1411         .delay                  = pmac_i2c_do_delay,
1412 };
1413
1414 static void __init pmac_i2c_dev_create(struct device_node *np, int quirks)
1415 {
1416         DBG("dev_create(%s)\n", np->full_name);
1417
1418         pmf_register_driver(np, &pmac_i2c_pfunc_handlers,
1419                             (void *)(long)quirks);
1420 }
1421
1422 static void __init pmac_i2c_dev_init(struct device_node *np, int quirks)
1423 {
1424         DBG("dev_create(%s)\n", np->full_name);
1425
1426         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_INIT, NULL);
1427 }
1428
1429 static void pmac_i2c_dev_suspend(struct device_node *np, int quirks)
1430 {
1431         DBG("dev_suspend(%s)\n", np->full_name);
1432         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_SLEEP, NULL);
1433 }
1434
1435 static void pmac_i2c_dev_resume(struct device_node *np, int quirks)
1436 {
1437         DBG("dev_resume(%s)\n", np->full_name);
1438         pmf_do_functions(np, NULL, 0, PMF_FLAGS_ON_WAKE, NULL);
1439 }
1440
1441 void pmac_pfunc_i2c_suspend(void)
1442 {
1443         pmac_i2c_devscan(pmac_i2c_dev_suspend);
1444 }
1445
1446 void pmac_pfunc_i2c_resume(void)
1447 {
1448         pmac_i2c_devscan(pmac_i2c_dev_resume);
1449 }
1450
1451 /*
1452  * Initialize us: probe all i2c busses on the machine, instantiate
1453  * busses and platform functions as needed.
1454  */
1455 /* This is non-static as it might be called early by smp code */
1456 int __init pmac_i2c_init(void)
1457 {
1458         static int i2c_inited;
1459
1460         if (i2c_inited)
1461                 return 0;
1462         i2c_inited = 1;
1463
1464         /* Probe keywest-i2c busses */
1465         kw_i2c_probe();
1466
1467 #ifdef CONFIG_ADB_PMU
1468         /* Probe PMU i2c busses */
1469         pmu_i2c_probe();
1470 #endif
1471
1472 #ifdef CONFIG_PMAC_SMU
1473         /* Probe SMU i2c busses */
1474         smu_i2c_probe();
1475 #endif
1476
1477         /* Now add plaform functions for some known devices */
1478         pmac_i2c_devscan(pmac_i2c_dev_create);
1479
1480         return 0;
1481 }
1482 machine_arch_initcall(powermac, pmac_i2c_init);
1483
1484 /* Since pmac_i2c_init can be called too early for the platform device
1485  * registration, we need to do it at a later time. In our case, subsys
1486  * happens to fit well, though I agree it's a bit of a hack...
1487  */
1488 static int __init pmac_i2c_create_platform_devices(void)
1489 {
1490         struct pmac_i2c_bus *bus;
1491         int i = 0;
1492
1493         /* In the case where we are initialized from smp_init(), we must
1494          * not use the timer (and thus the irq). It's safe from now on
1495          * though
1496          */
1497         pmac_i2c_force_poll = 0;
1498
1499         /* Create platform devices */
1500         list_for_each_entry(bus, &pmac_i2c_busses, link) {
1501                 bus->platform_dev =
1502                         platform_device_alloc("i2c-powermac", i++);
1503                 if (bus->platform_dev == NULL)
1504                         return -ENOMEM;
1505                 bus->platform_dev->dev.platform_data = bus;
1506                 platform_device_add(bus->platform_dev);
1507         }
1508
1509         /* Now call platform "init" functions */
1510         pmac_i2c_devscan(pmac_i2c_dev_init);
1511
1512         return 0;
1513 }
1514 machine_subsys_initcall(powermac, pmac_i2c_create_platform_devices);