[PATCH] WE-21 for orinoco
[linux-2.6] / drivers / net / amd8111e.c
1
2 /* Advanced  Micro Devices Inc. AMD8111E Linux Network Driver
3  * Copyright (C) 2004 Advanced Micro Devices
4  *
5  *
6  * Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
7  * Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
8  * Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
9  * Derived from the lance driver written 1993,1994,1995 by Donald Becker.
10  * Copyright 1993 United States Government as represented by the
11  *      Director, National Security Agency.[ pcnet32.c ]
12  * Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
13  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
14  *
15  *
16  * This program is free software; you can redistribute it and/or modify
17  * it under the terms of the GNU General Public License as published by
18  * the Free Software Foundation; either version 2 of the License, or
19  * (at your option) any later version.
20  *
21  * This program is distributed in the hope that it will be useful,
22  * but WITHOUT ANY WARRANTY; without even the implied warranty of
23  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
24  * GNU General Public License for more details.
25  *
26  * You should have received a copy of the GNU General Public License
27  * along with this program; if not, write to the Free Software
28  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307
29  * USA
30
31 Module Name:
32
33         amd8111e.c
34
35 Abstract:
36
37          AMD8111 based 10/100 Ethernet Controller Driver.
38
39 Environment:
40
41         Kernel Mode
42
43 Revision History:
44         3.0.0
45            Initial Revision.
46         3.0.1
47          1. Dynamic interrupt coalescing.
48          2. Removed prev_stats.
49          3. MII support.
50          4. Dynamic IPG support
51         3.0.2  05/29/2003
52          1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
53          2. Bug fix: Fixed VLAN support failure.
54          3. Bug fix: Fixed receive interrupt coalescing bug.
55          4. Dynamic IPG support is disabled by default.
56         3.0.3 06/05/2003
57          1. Bug fix: Fixed failure to close the interface if SMP is enabled.
58         3.0.4 12/09/2003
59          1. Added set_mac_address routine for bonding driver support.
60          2. Tested the driver for bonding support
61          3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
62             indicated to the h/w.
63          4. Modified amd8111e_rx() routine to receive all the received packets
64             in the first interrupt.
65          5. Bug fix: Corrected  rx_errors  reported in get_stats() function.
66         3.0.5 03/22/2004
67          1. Added NAPI support
68
69 */
70
71
72 #include <linux/module.h>
73 #include <linux/kernel.h>
74 #include <linux/types.h>
75 #include <linux/compiler.h>
76 #include <linux/slab.h>
77 #include <linux/delay.h>
78 #include <linux/init.h>
79 #include <linux/ioport.h>
80 #include <linux/pci.h>
81 #include <linux/netdevice.h>
82 #include <linux/etherdevice.h>
83 #include <linux/skbuff.h>
84 #include <linux/ethtool.h>
85 #include <linux/mii.h>
86 #include <linux/if_vlan.h>
87 #include <linux/ctype.h>
88 #include <linux/crc32.h>
89 #include <linux/dma-mapping.h>
90
91 #include <asm/system.h>
92 #include <asm/io.h>
93 #include <asm/byteorder.h>
94 #include <asm/uaccess.h>
95
96 #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
97 #define AMD8111E_VLAN_TAG_USED 1
98 #else
99 #define AMD8111E_VLAN_TAG_USED 0
100 #endif
101
102 #include "amd8111e.h"
103 #define MODULE_NAME     "amd8111e"
104 #define MODULE_VERS     "3.0.6"
105 MODULE_AUTHOR("Advanced Micro Devices, Inc.");
106 MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version 3.0.6");
107 MODULE_LICENSE("GPL");
108 MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
109 module_param_array(speed_duplex, int, NULL, 0);
110 MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotitate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
111 module_param_array(coalesce, bool, NULL, 0);
112 MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
113 module_param_array(dynamic_ipg, bool, NULL, 0);
114 MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
115
116 static struct pci_device_id amd8111e_pci_tbl[] = {
117
118         { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD8111E_7462,
119          PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
120         { 0, }
121
122 };
123 /*
124 This function will read the PHY registers.
125 */
126 static int amd8111e_read_phy(struct amd8111e_priv* lp, int phy_id, int reg, u32* val)
127 {
128         void __iomem *mmio = lp->mmio;
129         unsigned int reg_val;
130         unsigned int repeat= REPEAT_CNT;
131
132         reg_val = readl(mmio + PHY_ACCESS);
133         while (reg_val & PHY_CMD_ACTIVE)
134                 reg_val = readl( mmio + PHY_ACCESS );
135
136         writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
137                            ((reg & 0x1f) << 16),  mmio +PHY_ACCESS);
138         do{
139                 reg_val = readl(mmio + PHY_ACCESS);
140                 udelay(30);  /* It takes 30 us to read/write data */
141         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
142         if(reg_val & PHY_RD_ERR)
143                 goto err_phy_read;
144
145         *val = reg_val & 0xffff;
146         return 0;
147 err_phy_read:
148         *val = 0;
149         return -EINVAL;
150
151 }
152
153 /*
154 This function will write into PHY registers.
155 */
156 static int amd8111e_write_phy(struct amd8111e_priv* lp,int phy_id, int reg, u32 val)
157 {
158         unsigned int repeat = REPEAT_CNT
159         void __iomem *mmio = lp->mmio;
160         unsigned int reg_val;
161
162         reg_val = readl(mmio + PHY_ACCESS);
163         while (reg_val & PHY_CMD_ACTIVE)
164                 reg_val = readl( mmio + PHY_ACCESS );
165
166         writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
167                            ((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
168
169         do{
170                 reg_val = readl(mmio + PHY_ACCESS);
171                 udelay(30);  /* It takes 30 us to read/write the data */
172         } while (--repeat && (reg_val & PHY_CMD_ACTIVE));
173
174         if(reg_val & PHY_RD_ERR)
175                 goto err_phy_write;
176
177         return 0;
178
179 err_phy_write:
180         return -EINVAL;
181
182 }
183 /*
184 This is the mii register read function provided to the mii interface.
185 */
186 static int amd8111e_mdio_read(struct net_device * dev, int phy_id, int reg_num)
187 {
188         struct amd8111e_priv* lp = netdev_priv(dev);
189         unsigned int reg_val;
190
191         amd8111e_read_phy(lp,phy_id,reg_num,&reg_val);
192         return reg_val;
193
194 }
195
196 /*
197 This is the mii register write function provided to the mii interface.
198 */
199 static void amd8111e_mdio_write(struct net_device * dev, int phy_id, int reg_num, int val)
200 {
201         struct amd8111e_priv* lp = netdev_priv(dev);
202
203         amd8111e_write_phy(lp, phy_id, reg_num, val);
204 }
205
206 /*
207 This function will set PHY speed. During initialization sets the original speed to 100 full.
208 */
209 static void amd8111e_set_ext_phy(struct net_device *dev)
210 {
211         struct amd8111e_priv *lp = netdev_priv(dev);
212         u32 bmcr,advert,tmp;
213
214         /* Determine mii register values to set the speed */
215         advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
216         tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
217         switch (lp->ext_phy_option){
218
219                 default:
220                 case SPEED_AUTONEG: /* advertise all values */
221                         tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
222                                 ADVERTISE_100HALF|ADVERTISE_100FULL) ;
223                         break;
224                 case SPEED10_HALF:
225                         tmp |= ADVERTISE_10HALF;
226                         break;
227                 case SPEED10_FULL:
228                         tmp |= ADVERTISE_10FULL;
229                         break;
230                 case SPEED100_HALF:
231                         tmp |= ADVERTISE_100HALF;
232                         break;
233                 case SPEED100_FULL:
234                         tmp |= ADVERTISE_100FULL;
235                         break;
236         }
237
238         if(advert != tmp)
239                 amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
240         /* Restart auto negotiation */
241         bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
242         bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
243         amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
244
245 }
246
247 /*
248 This function will unmap skb->data space and will free
249 all transmit and receive skbuffs.
250 */
251 static int amd8111e_free_skbs(struct net_device *dev)
252 {
253         struct amd8111e_priv *lp = netdev_priv(dev);
254         struct sk_buff* rx_skbuff;
255         int i;
256
257         /* Freeing transmit skbs */
258         for(i = 0; i < NUM_TX_BUFFERS; i++){
259                 if(lp->tx_skbuff[i]){
260                         pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i],                                        lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
261                         dev_kfree_skb (lp->tx_skbuff[i]);
262                         lp->tx_skbuff[i] = NULL;
263                         lp->tx_dma_addr[i] = 0;
264                 }
265         }
266         /* Freeing previously allocated receive buffers */
267         for (i = 0; i < NUM_RX_BUFFERS; i++){
268                 rx_skbuff = lp->rx_skbuff[i];
269                 if(rx_skbuff != NULL){
270                         pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
271                                   lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
272                         dev_kfree_skb(lp->rx_skbuff[i]);
273                         lp->rx_skbuff[i] = NULL;
274                         lp->rx_dma_addr[i] = 0;
275                 }
276         }
277
278         return 0;
279 }
280
281 /*
282 This will set the receive buffer length corresponding to the mtu size of networkinterface.
283 */
284 static inline void amd8111e_set_rx_buff_len(struct net_device* dev)
285 {
286         struct amd8111e_priv* lp = netdev_priv(dev);
287         unsigned int mtu = dev->mtu;
288
289         if (mtu > ETH_DATA_LEN){
290                 /* MTU + ethernet header + FCS
291                 + optional VLAN tag + skb reserve space 2 */
292
293                 lp->rx_buff_len = mtu + ETH_HLEN + 10;
294                 lp->options |= OPTION_JUMBO_ENABLE;
295         } else{
296                 lp->rx_buff_len = PKT_BUFF_SZ;
297                 lp->options &= ~OPTION_JUMBO_ENABLE;
298         }
299 }
300
301 /*
302 This function will free all the previously allocated buffers, determine new receive buffer length  and will allocate new receive buffers. This function also allocates and initializes both the transmitter and receive hardware descriptors.
303  */
304 static int amd8111e_init_ring(struct net_device *dev)
305 {
306         struct amd8111e_priv *lp = netdev_priv(dev);
307         int i;
308
309         lp->rx_idx = lp->tx_idx = 0;
310         lp->tx_complete_idx = 0;
311         lp->tx_ring_idx = 0;
312
313
314         if(lp->opened)
315                 /* Free previously allocated transmit and receive skbs */
316                 amd8111e_free_skbs(dev);
317
318         else{
319                  /* allocate the tx and rx descriptors */
320                 if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
321                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
322                         &lp->tx_ring_dma_addr)) == NULL)
323
324                         goto err_no_mem;
325
326                 if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
327                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
328                         &lp->rx_ring_dma_addr)) == NULL)
329
330                         goto err_free_tx_ring;
331
332         }
333         /* Set new receive buff size */
334         amd8111e_set_rx_buff_len(dev);
335
336         /* Allocating receive  skbs */
337         for (i = 0; i < NUM_RX_BUFFERS; i++) {
338
339                 if (!(lp->rx_skbuff[i] = dev_alloc_skb(lp->rx_buff_len))) {
340                                 /* Release previos allocated skbs */
341                                 for(--i; i >= 0 ;i--)
342                                         dev_kfree_skb(lp->rx_skbuff[i]);
343                                 goto err_free_rx_ring;
344                 }
345                 skb_reserve(lp->rx_skbuff[i],2);
346         }
347         /* Initilaizing receive descriptors */
348         for (i = 0; i < NUM_RX_BUFFERS; i++) {
349                 lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
350                         lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
351
352                 lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
353                 lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
354                 wmb();
355                 lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
356         }
357
358         /* Initializing transmit descriptors */
359         for (i = 0; i < NUM_TX_RING_DR; i++) {
360                 lp->tx_ring[i].buff_phy_addr = 0;
361                 lp->tx_ring[i].tx_flags = 0;
362                 lp->tx_ring[i].buff_count = 0;
363         }
364
365         return 0;
366
367 err_free_rx_ring:
368
369         pci_free_consistent(lp->pci_dev,
370                 sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
371                 lp->rx_ring_dma_addr);
372
373 err_free_tx_ring:
374
375         pci_free_consistent(lp->pci_dev,
376                  sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
377                  lp->tx_ring_dma_addr);
378
379 err_no_mem:
380         return -ENOMEM;
381 }
382 /* This function will set the interrupt coalescing according to the input arguments */
383 static int amd8111e_set_coalesce(struct net_device * dev, enum coal_mode cmod)
384 {
385         unsigned int timeout;
386         unsigned int event_count;
387
388         struct amd8111e_priv *lp = netdev_priv(dev);
389         void __iomem *mmio = lp->mmio;
390         struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
391
392
393         switch(cmod)
394         {
395                 case RX_INTR_COAL :
396                         timeout = coal_conf->rx_timeout;
397                         event_count = coal_conf->rx_event_count;
398                         if( timeout > MAX_TIMEOUT ||
399                                         event_count > MAX_EVENT_COUNT )
400                         return -EINVAL;
401
402                         timeout = timeout * DELAY_TIMER_CONV;
403                         writel(VAL0|STINTEN, mmio+INTEN0);
404                         writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
405                                                         mmio+DLY_INT_A);
406                         break;
407
408                 case TX_INTR_COAL :
409                         timeout = coal_conf->tx_timeout;
410                         event_count = coal_conf->tx_event_count;
411                         if( timeout > MAX_TIMEOUT ||
412                                         event_count > MAX_EVENT_COUNT )
413                         return -EINVAL;
414
415
416                         timeout = timeout * DELAY_TIMER_CONV;
417                         writel(VAL0|STINTEN,mmio+INTEN0);
418                         writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
419                                                          mmio+DLY_INT_B);
420                         break;
421
422                 case DISABLE_COAL:
423                         writel(0,mmio+STVAL);
424                         writel(STINTEN, mmio+INTEN0);
425                         writel(0, mmio +DLY_INT_B);
426                         writel(0, mmio+DLY_INT_A);
427                         break;
428                  case ENABLE_COAL:
429                        /* Start the timer */
430                         writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /*  0.5 sec */
431                         writel(VAL0|STINTEN, mmio+INTEN0);
432                         break;
433                 default:
434                         break;
435
436    }
437         return 0;
438
439 }
440
441 /*
442 This function initializes the device registers  and starts the device.
443 */
444 static int amd8111e_restart(struct net_device *dev)
445 {
446         struct amd8111e_priv *lp = netdev_priv(dev);
447         void __iomem *mmio = lp->mmio;
448         int i,reg_val;
449
450         /* stop the chip */
451          writel(RUN, mmio + CMD0);
452
453         if(amd8111e_init_ring(dev))
454                 return -ENOMEM;
455
456         /* enable the port manager and set auto negotiation always */
457         writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
458         writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
459
460         amd8111e_set_ext_phy(dev);
461
462         /* set control registers */
463         reg_val = readl(mmio + CTRL1);
464         reg_val &= ~XMTSP_MASK;
465         writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
466
467         /* enable interrupt */
468         writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
469                 APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
470                 SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
471
472         writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
473
474         /* initialize tx and rx ring base addresses */
475         writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
476         writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
477
478         writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
479         writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
480
481         /* set default IPG to 96 */
482         writew((u32)DEFAULT_IPG,mmio+IPG);
483         writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
484
485         if(lp->options & OPTION_JUMBO_ENABLE){
486                 writel((u32)VAL2|JUMBO, mmio + CMD3);
487                 /* Reset REX_UFLO */
488                 writel( REX_UFLO, mmio + CMD2);
489                 /* Should not set REX_UFLO for jumbo frames */
490                 writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
491         }else{
492                 writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
493                 writel((u32)JUMBO, mmio + CMD3);
494         }
495
496 #if AMD8111E_VLAN_TAG_USED
497         writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
498 #endif
499         writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
500
501         /* Setting the MAC address to the device */
502         for(i = 0; i < ETH_ADDR_LEN; i++)
503                 writeb( dev->dev_addr[i], mmio + PADR + i );
504
505         /* Enable interrupt coalesce */
506         if(lp->options & OPTION_INTR_COAL_ENABLE){
507                 printk(KERN_INFO "%s: Interrupt Coalescing Enabled.\n",
508                                                                 dev->name);
509                 amd8111e_set_coalesce(dev,ENABLE_COAL);
510         }
511
512         /* set RUN bit to start the chip */
513         writel(VAL2 | RDMD0, mmio + CMD0);
514         writel(VAL0 | INTREN | RUN, mmio + CMD0);
515
516         /* To avoid PCI posting bug */
517         readl(mmio+CMD0);
518         return 0;
519 }
520 /*
521 This function clears necessary the device registers.
522 */
523 static void amd8111e_init_hw_default( struct amd8111e_priv* lp)
524 {
525         unsigned int reg_val;
526         unsigned int logic_filter[2] ={0,};
527         void __iomem *mmio = lp->mmio;
528
529
530         /* stop the chip */
531         writel(RUN, mmio + CMD0);
532
533         /* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
534         writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
535
536         /* Clear RCV_RING_BASE_ADDR */
537         writel(0, mmio + RCV_RING_BASE_ADDR0);
538
539         /* Clear XMT_RING_BASE_ADDR */
540         writel(0, mmio + XMT_RING_BASE_ADDR0);
541         writel(0, mmio + XMT_RING_BASE_ADDR1);
542         writel(0, mmio + XMT_RING_BASE_ADDR2);
543         writel(0, mmio + XMT_RING_BASE_ADDR3);
544
545         /* Clear CMD0  */
546         writel(CMD0_CLEAR,mmio + CMD0);
547
548         /* Clear CMD2 */
549         writel(CMD2_CLEAR, mmio +CMD2);
550
551         /* Clear CMD7 */
552         writel(CMD7_CLEAR , mmio + CMD7);
553
554         /* Clear DLY_INT_A and DLY_INT_B */
555         writel(0x0, mmio + DLY_INT_A);
556         writel(0x0, mmio + DLY_INT_B);
557
558         /* Clear FLOW_CONTROL */
559         writel(0x0, mmio + FLOW_CONTROL);
560
561         /* Clear INT0  write 1 to clear register */
562         reg_val = readl(mmio + INT0);
563         writel(reg_val, mmio + INT0);
564
565         /* Clear STVAL */
566         writel(0x0, mmio + STVAL);
567
568         /* Clear INTEN0 */
569         writel( INTEN0_CLEAR, mmio + INTEN0);
570
571         /* Clear LADRF */
572         writel(0x0 , mmio + LADRF);
573
574         /* Set SRAM_SIZE & SRAM_BOUNDARY registers  */
575         writel( 0x80010,mmio + SRAM_SIZE);
576
577         /* Clear RCV_RING0_LEN */
578         writel(0x0, mmio +  RCV_RING_LEN0);
579
580         /* Clear XMT_RING0/1/2/3_LEN */
581         writel(0x0, mmio +  XMT_RING_LEN0);
582         writel(0x0, mmio +  XMT_RING_LEN1);
583         writel(0x0, mmio +  XMT_RING_LEN2);
584         writel(0x0, mmio +  XMT_RING_LEN3);
585
586         /* Clear XMT_RING_LIMIT */
587         writel(0x0, mmio + XMT_RING_LIMIT);
588
589         /* Clear MIB */
590         writew(MIB_CLEAR, mmio + MIB_ADDR);
591
592         /* Clear LARF */
593         amd8111e_writeq(*(u64*)logic_filter,mmio+LADRF);
594
595         /* SRAM_SIZE register */
596         reg_val = readl(mmio + SRAM_SIZE);
597
598         if(lp->options & OPTION_JUMBO_ENABLE)
599                 writel( VAL2|JUMBO, mmio + CMD3);
600 #if AMD8111E_VLAN_TAG_USED
601         writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
602 #endif
603         /* Set default value to CTRL1 Register */
604         writel(CTRL1_DEFAULT, mmio + CTRL1);
605
606         /* To avoid PCI posting bug */
607         readl(mmio + CMD2);
608
609 }
610
611 /*
612 This function disables the interrupt and clears all the pending
613 interrupts in INT0
614  */
615 static void amd8111e_disable_interrupt(struct amd8111e_priv* lp)
616 {
617         u32 intr0;
618
619         /* Disable interrupt */
620         writel(INTREN, lp->mmio + CMD0);
621
622         /* Clear INT0 */
623         intr0 = readl(lp->mmio + INT0);
624         writel(intr0, lp->mmio + INT0);
625
626         /* To avoid PCI posting bug */
627         readl(lp->mmio + INT0);
628
629 }
630
631 /*
632 This function stops the chip.
633 */
634 static void amd8111e_stop_chip(struct amd8111e_priv* lp)
635 {
636         writel(RUN, lp->mmio + CMD0);
637
638         /* To avoid PCI posting bug */
639         readl(lp->mmio + CMD0);
640 }
641
642 /*
643 This function frees the  transmiter and receiver descriptor rings.
644 */
645 static void amd8111e_free_ring(struct amd8111e_priv* lp)
646 {
647
648         /* Free transmit and receive skbs */
649         amd8111e_free_skbs(lp->amd8111e_net_dev);
650
651         /* Free transmit and receive descriptor rings */
652         if(lp->rx_ring){
653                 pci_free_consistent(lp->pci_dev,
654                         sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
655                         lp->rx_ring, lp->rx_ring_dma_addr);
656                 lp->rx_ring = NULL;
657         }
658
659         if(lp->tx_ring){
660                 pci_free_consistent(lp->pci_dev,
661                         sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
662                         lp->tx_ring, lp->tx_ring_dma_addr);
663
664                 lp->tx_ring = NULL;
665         }
666
667 }
668 #if AMD8111E_VLAN_TAG_USED
669 /*
670 This is the receive indication function for packets with vlan tag.
671 */
672 static int amd8111e_vlan_rx(struct amd8111e_priv *lp, struct sk_buff *skb, u16 vlan_tag)
673 {
674 #ifdef CONFIG_AMD8111E_NAPI
675         return vlan_hwaccel_receive_skb(skb, lp->vlgrp,vlan_tag);
676 #else
677         return vlan_hwaccel_rx(skb, lp->vlgrp, vlan_tag);
678 #endif /* CONFIG_AMD8111E_NAPI */
679 }
680 #endif
681
682 /*
683 This function will free all the transmit skbs that are actually transmitted by the device. It will check the ownership of the skb before freeing the skb.
684 */
685 static int amd8111e_tx(struct net_device *dev)
686 {
687         struct amd8111e_priv* lp = netdev_priv(dev);
688         int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
689         int status;
690         /* Complete all the transmit packet */
691         while (lp->tx_complete_idx != lp->tx_idx){
692                 tx_index =  lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
693                 status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
694
695                 if(status & OWN_BIT)
696                         break;  /* It still hasn't been Txed */
697
698                 lp->tx_ring[tx_index].buff_phy_addr = 0;
699
700                 /* We must free the original skb */
701                 if (lp->tx_skbuff[tx_index]) {
702                         pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
703                                         lp->tx_skbuff[tx_index]->len,
704                                         PCI_DMA_TODEVICE);
705                         dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
706                         lp->tx_skbuff[tx_index] = NULL;
707                         lp->tx_dma_addr[tx_index] = 0;
708                 }
709                 lp->tx_complete_idx++;
710                 /*COAL update tx coalescing parameters */
711                 lp->coal_conf.tx_packets++;
712                 lp->coal_conf.tx_bytes += lp->tx_ring[tx_index].buff_count;
713
714                 if (netif_queue_stopped(dev) &&
715                         lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
716                         /* The ring is no longer full, clear tbusy. */
717                         /* lp->tx_full = 0; */
718                         netif_wake_queue (dev);
719                 }
720         }
721         return 0;
722 }
723
724 #ifdef CONFIG_AMD8111E_NAPI
725 /* This function handles the driver receive operation in polling mode */
726 static int amd8111e_rx_poll(struct net_device *dev, int * budget)
727 {
728         struct amd8111e_priv *lp = netdev_priv(dev);
729         int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
730         void __iomem *mmio = lp->mmio;
731         struct sk_buff *skb,*new_skb;
732         int min_pkt_len, status;
733         unsigned int intr0;
734         int num_rx_pkt = 0;
735         /*int max_rx_pkt = NUM_RX_BUFFERS;*/
736         short pkt_len;
737 #if AMD8111E_VLAN_TAG_USED
738         short vtag;
739 #endif
740         int rx_pkt_limit = dev->quota;
741         unsigned long flags;
742
743         do{
744                 /* process receive packets until we use the quota*/
745                 /* If we own the next entry, it's a new packet. Send it up. */
746                 while(1) {
747                         status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
748                         if (status & OWN_BIT)
749                                 break;
750
751                         /*
752                          * There is a tricky error noted by John Murphy,
753                          * <murf@perftech.com> to Russ Nelson: Even with
754                          * full-sized * buffers it's possible for a
755                          * jabber packet to use two buffers, with only
756                          * the last correctly noting the error.
757                          */
758
759                         if(status & ERR_BIT) {
760                                 /* reseting flags */
761                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
762                                 goto err_next_pkt;
763                         }
764                         /* check for STP and ENP */
765                         if(!((status & STP_BIT) && (status & ENP_BIT))){
766                                 /* reseting flags */
767                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
768                                 goto err_next_pkt;
769                         }
770                         pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
771
772 #if AMD8111E_VLAN_TAG_USED
773                         vtag = status & TT_MASK;
774                         /*MAC will strip vlan tag*/
775                         if(lp->vlgrp != NULL && vtag !=0)
776                                 min_pkt_len =MIN_PKT_LEN - 4;
777                         else
778 #endif
779                                 min_pkt_len =MIN_PKT_LEN;
780
781                         if (pkt_len < min_pkt_len) {
782                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
783                                 lp->drv_rx_errors++;
784                                 goto err_next_pkt;
785                         }
786                         if(--rx_pkt_limit < 0)
787                                 goto rx_not_empty;
788                         if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
789                                 /* if allocation fail,
790                                    ignore that pkt and go to next one */
791                                 lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
792                                 lp->drv_rx_errors++;
793                                 goto err_next_pkt;
794                         }
795
796                         skb_reserve(new_skb, 2);
797                         skb = lp->rx_skbuff[rx_index];
798                         pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
799                                          lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
800                         skb_put(skb, pkt_len);
801                         skb->dev = dev;
802                         lp->rx_skbuff[rx_index] = new_skb;
803                         new_skb->dev = dev;
804                         lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
805                                                                    new_skb->data,
806                                                                    lp->rx_buff_len-2,
807                                                                    PCI_DMA_FROMDEVICE);
808
809                         skb->protocol = eth_type_trans(skb, dev);
810
811 #if AMD8111E_VLAN_TAG_USED
812                         if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
813                                 amd8111e_vlan_rx(lp, skb,
814                                          le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
815                         } else
816 #endif
817                                 netif_receive_skb(skb);
818                         /*COAL update rx coalescing parameters*/
819                         lp->coal_conf.rx_packets++;
820                         lp->coal_conf.rx_bytes += pkt_len;
821                         num_rx_pkt++;
822                         dev->last_rx = jiffies;
823
824                 err_next_pkt:
825                         lp->rx_ring[rx_index].buff_phy_addr
826                                 = cpu_to_le32(lp->rx_dma_addr[rx_index]);
827                         lp->rx_ring[rx_index].buff_count =
828                                 cpu_to_le16(lp->rx_buff_len-2);
829                         wmb();
830                         lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
831                         rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
832                 }
833                 /* Check the interrupt status register for more packets in the
834                    mean time. Process them since we have not used up our quota.*/
835
836                 intr0 = readl(mmio + INT0);
837                 /*Ack receive packets */
838                 writel(intr0 & RINT0,mmio + INT0);
839
840         } while(intr0 & RINT0);
841
842         /* Receive descriptor is empty now */
843         dev->quota -= num_rx_pkt;
844         *budget -= num_rx_pkt;
845
846         spin_lock_irqsave(&lp->lock, flags);
847         netif_rx_complete(dev);
848         writel(VAL0|RINTEN0, mmio + INTEN0);
849         writel(VAL2 | RDMD0, mmio + CMD0);
850         spin_unlock_irqrestore(&lp->lock, flags);
851         return 0;
852
853 rx_not_empty:
854         /* Do not call a netif_rx_complete */
855         dev->quota -= num_rx_pkt;
856         *budget -= num_rx_pkt;
857         return 1;
858 }
859
860 #else
861 /*
862 This function will check the ownership of receive buffers and descriptors. It will indicate to kernel up to half the number of maximum receive buffers in the descriptor ring, in a single receive interrupt. It will also replenish the descriptors with new skbs.
863 */
864 static int amd8111e_rx(struct net_device *dev)
865 {
866         struct amd8111e_priv *lp = netdev_priv(dev);
867         struct sk_buff *skb,*new_skb;
868         int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
869         int min_pkt_len, status;
870         int num_rx_pkt = 0;
871         int max_rx_pkt = NUM_RX_BUFFERS;
872         short pkt_len;
873 #if AMD8111E_VLAN_TAG_USED
874         short vtag;
875 #endif
876
877         /* If we own the next entry, it's a new packet. Send it up. */
878         while(++num_rx_pkt <= max_rx_pkt){
879                 status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
880                 if(status & OWN_BIT)
881                         return 0;
882
883                 /* check if err summary bit is set */
884                 if(status & ERR_BIT){
885                         /*
886                          * There is a tricky error noted by John Murphy,
887                          * <murf@perftech.com> to Russ Nelson: Even with full-sized
888                          * buffers it's possible for a jabber packet to use two
889                          * buffers, with only the last correctly noting the error.                       */
890                         /* reseting flags */
891                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
892                         goto err_next_pkt;
893                 }
894                 /* check for STP and ENP */
895                 if(!((status & STP_BIT) && (status & ENP_BIT))){
896                         /* reseting flags */
897                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
898                         goto err_next_pkt;
899                 }
900                 pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
901
902 #if AMD8111E_VLAN_TAG_USED
903                 vtag = status & TT_MASK;
904                 /*MAC will strip vlan tag*/
905                 if(lp->vlgrp != NULL && vtag !=0)
906                         min_pkt_len =MIN_PKT_LEN - 4;
907                 else
908 #endif
909                         min_pkt_len =MIN_PKT_LEN;
910
911                 if (pkt_len < min_pkt_len) {
912                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
913                         lp->drv_rx_errors++;
914                         goto err_next_pkt;
915                 }
916                 if(!(new_skb = dev_alloc_skb(lp->rx_buff_len))){
917                         /* if allocation fail,
918                                 ignore that pkt and go to next one */
919                         lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
920                         lp->drv_rx_errors++;
921                         goto err_next_pkt;
922                 }
923
924                 skb_reserve(new_skb, 2);
925                 skb = lp->rx_skbuff[rx_index];
926                 pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
927                         lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
928                 skb_put(skb, pkt_len);
929                 skb->dev = dev;
930                 lp->rx_skbuff[rx_index] = new_skb;
931                 new_skb->dev = dev;
932                 lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
933                         new_skb->data, lp->rx_buff_len-2,PCI_DMA_FROMDEVICE);
934
935                 skb->protocol = eth_type_trans(skb, dev);
936
937 #if AMD8111E_VLAN_TAG_USED
938                 if(lp->vlgrp != NULL && (vtag == TT_VLAN_TAGGED)){
939                         amd8111e_vlan_rx(lp, skb,
940                                  le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info));
941                 } else
942 #endif
943
944                         netif_rx (skb);
945                         /*COAL update rx coalescing parameters*/
946                         lp->coal_conf.rx_packets++;
947                         lp->coal_conf.rx_bytes += pkt_len;
948
949                         dev->last_rx = jiffies;
950
951 err_next_pkt:
952                 lp->rx_ring[rx_index].buff_phy_addr
953                          = cpu_to_le32(lp->rx_dma_addr[rx_index]);
954                 lp->rx_ring[rx_index].buff_count =
955                                 cpu_to_le16(lp->rx_buff_len-2);
956                 wmb();
957                 lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
958                 rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
959         }
960
961         return 0;
962 }
963 #endif /* CONFIG_AMD8111E_NAPI */
964 /*
965 This function will indicate the link status to the kernel.
966 */
967 static int amd8111e_link_change(struct net_device* dev)
968 {
969         struct amd8111e_priv *lp = netdev_priv(dev);
970         int status0,speed;
971
972         /* read the link change */
973         status0 = readl(lp->mmio + STAT0);
974
975         if(status0 & LINK_STATS){
976                 if(status0 & AUTONEG_COMPLETE)
977                         lp->link_config.autoneg = AUTONEG_ENABLE;
978                 else
979                         lp->link_config.autoneg = AUTONEG_DISABLE;
980
981                 if(status0 & FULL_DPLX)
982                         lp->link_config.duplex = DUPLEX_FULL;
983                 else
984                         lp->link_config.duplex = DUPLEX_HALF;
985                 speed = (status0 & SPEED_MASK) >> 7;
986                 if(speed == PHY_SPEED_10)
987                         lp->link_config.speed = SPEED_10;
988                 else if(speed == PHY_SPEED_100)
989                         lp->link_config.speed = SPEED_100;
990
991                 printk(KERN_INFO "%s: Link is Up. Speed is %s Mbps %s Duplex\n",                        dev->name,
992                        (lp->link_config.speed == SPEED_100) ? "100": "10",
993                        (lp->link_config.duplex == DUPLEX_FULL)? "Full": "Half");
994                 netif_carrier_on(dev);
995         }
996         else{
997                 lp->link_config.speed = SPEED_INVALID;
998                 lp->link_config.duplex = DUPLEX_INVALID;
999                 lp->link_config.autoneg = AUTONEG_INVALID;
1000                 printk(KERN_INFO "%s: Link is Down.\n",dev->name);
1001                 netif_carrier_off(dev);
1002         }
1003
1004         return 0;
1005 }
1006 /*
1007 This function reads the mib counters.
1008 */
1009 static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
1010 {
1011         unsigned int  status;
1012         unsigned  int data;
1013         unsigned int repeat = REPEAT_CNT;
1014
1015         writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
1016         do {
1017                 status = readw(mmio + MIB_ADDR);
1018                 udelay(2);      /* controller takes MAX 2 us to get mib data */
1019         }
1020         while (--repeat && (status & MIB_CMD_ACTIVE));
1021
1022         data = readl(mmio + MIB_DATA);
1023         return data;
1024 }
1025
1026 /*
1027 This function reads the mib registers and returns the hardware statistics. It  updates previous internal driver statistics with new values.
1028 */
1029 static struct net_device_stats *amd8111e_get_stats(struct net_device * dev)
1030 {
1031         struct amd8111e_priv *lp = netdev_priv(dev);
1032         void __iomem *mmio = lp->mmio;
1033         unsigned long flags;
1034         /* struct net_device_stats *prev_stats = &lp->prev_stats; */
1035         struct net_device_stats* new_stats = &lp->stats;
1036
1037         if(!lp->opened)
1038                 return &lp->stats;
1039         spin_lock_irqsave (&lp->lock, flags);
1040
1041         /* stats.rx_packets */
1042         new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
1043                                 amd8111e_read_mib(mmio, rcv_multicast_pkts)+
1044                                 amd8111e_read_mib(mmio, rcv_unicast_pkts);
1045
1046         /* stats.tx_packets */
1047         new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
1048
1049         /*stats.rx_bytes */
1050         new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
1051
1052         /* stats.tx_bytes */
1053         new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
1054
1055         /* stats.rx_errors */
1056         /* hw errors + errors driver reported */
1057         new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
1058                                 amd8111e_read_mib(mmio, rcv_fragments)+
1059                                 amd8111e_read_mib(mmio, rcv_jabbers)+
1060                                 amd8111e_read_mib(mmio, rcv_alignment_errors)+
1061                                 amd8111e_read_mib(mmio, rcv_fcs_errors)+
1062                                 amd8111e_read_mib(mmio, rcv_miss_pkts)+
1063                                 lp->drv_rx_errors;
1064
1065         /* stats.tx_errors */
1066         new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
1067
1068         /* stats.rx_dropped*/
1069         new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
1070
1071         /* stats.tx_dropped*/
1072         new_stats->tx_dropped = amd8111e_read_mib(mmio,  xmt_underrun_pkts);
1073
1074         /* stats.multicast*/
1075         new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
1076
1077         /* stats.collisions*/
1078         new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
1079
1080         /* stats.rx_length_errors*/
1081         new_stats->rx_length_errors =
1082                 amd8111e_read_mib(mmio, rcv_undersize_pkts)+
1083                 amd8111e_read_mib(mmio, rcv_oversize_pkts);
1084
1085         /* stats.rx_over_errors*/
1086         new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
1087
1088         /* stats.rx_crc_errors*/
1089         new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
1090
1091         /* stats.rx_frame_errors*/
1092         new_stats->rx_frame_errors =
1093                 amd8111e_read_mib(mmio, rcv_alignment_errors);
1094
1095         /* stats.rx_fifo_errors */
1096         new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
1097
1098         /* stats.rx_missed_errors */
1099         new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
1100
1101         /* stats.tx_aborted_errors*/
1102         new_stats->tx_aborted_errors =
1103                 amd8111e_read_mib(mmio, xmt_excessive_collision);
1104
1105         /* stats.tx_carrier_errors*/
1106         new_stats->tx_carrier_errors =
1107                 amd8111e_read_mib(mmio, xmt_loss_carrier);
1108
1109         /* stats.tx_fifo_errors*/
1110         new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
1111
1112         /* stats.tx_window_errors*/
1113         new_stats->tx_window_errors =
1114                 amd8111e_read_mib(mmio, xmt_late_collision);
1115
1116         /* Reset the mibs for collecting new statistics */
1117         /* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
1118
1119         spin_unlock_irqrestore (&lp->lock, flags);
1120
1121         return new_stats;
1122 }
1123 /* This function recalculate the interupt coalescing  mode on every interrupt
1124 according to the datarate and the packet rate.
1125 */
1126 static int amd8111e_calc_coalesce(struct net_device *dev)
1127 {
1128         struct amd8111e_priv *lp = netdev_priv(dev);
1129         struct amd8111e_coalesce_conf * coal_conf = &lp->coal_conf;
1130         int tx_pkt_rate;
1131         int rx_pkt_rate;
1132         int tx_data_rate;
1133         int rx_data_rate;
1134         int rx_pkt_size;
1135         int tx_pkt_size;
1136
1137         tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
1138         coal_conf->tx_prev_packets =  coal_conf->tx_packets;
1139
1140         tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
1141         coal_conf->tx_prev_bytes =  coal_conf->tx_bytes;
1142
1143         rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
1144         coal_conf->rx_prev_packets =  coal_conf->rx_packets;
1145
1146         rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
1147         coal_conf->rx_prev_bytes =  coal_conf->rx_bytes;
1148
1149         if(rx_pkt_rate < 800){
1150                 if(coal_conf->rx_coal_type != NO_COALESCE){
1151
1152                         coal_conf->rx_timeout = 0x0;
1153                         coal_conf->rx_event_count = 0;
1154                         amd8111e_set_coalesce(dev,RX_INTR_COAL);
1155                         coal_conf->rx_coal_type = NO_COALESCE;
1156                 }
1157         }
1158         else{
1159
1160                 rx_pkt_size = rx_data_rate/rx_pkt_rate;
1161                 if (rx_pkt_size < 128){
1162                         if(coal_conf->rx_coal_type != NO_COALESCE){
1163
1164                                 coal_conf->rx_timeout = 0;
1165                                 coal_conf->rx_event_count = 0;
1166                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1167                                 coal_conf->rx_coal_type = NO_COALESCE;
1168                         }
1169
1170                 }
1171                 else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
1172
1173                         if(coal_conf->rx_coal_type !=  LOW_COALESCE){
1174                                 coal_conf->rx_timeout = 1;
1175                                 coal_conf->rx_event_count = 4;
1176                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1177                                 coal_conf->rx_coal_type = LOW_COALESCE;
1178                         }
1179                 }
1180                 else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
1181
1182                         if(coal_conf->rx_coal_type !=  MEDIUM_COALESCE){
1183                                 coal_conf->rx_timeout = 1;
1184                                 coal_conf->rx_event_count = 4;
1185                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1186                                 coal_conf->rx_coal_type = MEDIUM_COALESCE;
1187                         }
1188
1189                 }
1190                 else if(rx_pkt_size >= 1024){
1191                         if(coal_conf->rx_coal_type !=  HIGH_COALESCE){
1192                                 coal_conf->rx_timeout = 2;
1193                                 coal_conf->rx_event_count = 3;
1194                                 amd8111e_set_coalesce(dev,RX_INTR_COAL);
1195                                 coal_conf->rx_coal_type = HIGH_COALESCE;
1196                         }
1197                 }
1198         }
1199         /* NOW FOR TX INTR COALESC */
1200         if(tx_pkt_rate < 800){
1201                 if(coal_conf->tx_coal_type != NO_COALESCE){
1202
1203                         coal_conf->tx_timeout = 0x0;
1204                         coal_conf->tx_event_count = 0;
1205                         amd8111e_set_coalesce(dev,TX_INTR_COAL);
1206                         coal_conf->tx_coal_type = NO_COALESCE;
1207                 }
1208         }
1209         else{
1210
1211                 tx_pkt_size = tx_data_rate/tx_pkt_rate;
1212                 if (tx_pkt_size < 128){
1213
1214                         if(coal_conf->tx_coal_type != NO_COALESCE){
1215
1216                                 coal_conf->tx_timeout = 0;
1217                                 coal_conf->tx_event_count = 0;
1218                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1219                                 coal_conf->tx_coal_type = NO_COALESCE;
1220                         }
1221
1222                 }
1223                 else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
1224
1225                         if(coal_conf->tx_coal_type !=  LOW_COALESCE){
1226                                 coal_conf->tx_timeout = 1;
1227                                 coal_conf->tx_event_count = 2;
1228                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1229                                 coal_conf->tx_coal_type = LOW_COALESCE;
1230
1231                         }
1232                 }
1233                 else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
1234
1235                         if(coal_conf->tx_coal_type !=  MEDIUM_COALESCE){
1236                                 coal_conf->tx_timeout = 2;
1237                                 coal_conf->tx_event_count = 5;
1238                                 amd8111e_set_coalesce(dev,TX_INTR_COAL);
1239                                 coal_conf->tx_coal_type = MEDIUM_COALESCE;
1240                         }
1241
1242                 }
1243                 else if(tx_pkt_size >= 1024){
1244                         if (tx_pkt_size >= 1024){
1245                                 if(coal_conf->tx_coal_type !=  HIGH_COALESCE){
1246                                         coal_conf->tx_timeout = 4;
1247                                         coal_conf->tx_event_count = 8;
1248                                         amd8111e_set_coalesce(dev,TX_INTR_COAL);
1249                                         coal_conf->tx_coal_type = HIGH_COALESCE;
1250                                 }
1251                         }
1252                 }
1253         }
1254         return 0;
1255
1256 }
1257 /*
1258 This is device interrupt function. It handles transmit, receive,link change and hardware timer interrupts.
1259 */
1260 static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *regs)
1261 {
1262
1263         struct net_device * dev = (struct net_device *) dev_id;
1264         struct amd8111e_priv *lp = netdev_priv(dev);
1265         void __iomem *mmio = lp->mmio;
1266         unsigned int intr0, intren0;
1267         unsigned int handled = 1;
1268
1269         if(unlikely(dev == NULL))
1270                 return IRQ_NONE;
1271
1272         spin_lock(&lp->lock);
1273
1274         /* disabling interrupt */
1275         writel(INTREN, mmio + CMD0);
1276
1277         /* Read interrupt status */
1278         intr0 = readl(mmio + INT0);
1279         intren0 = readl(mmio + INTEN0);
1280
1281         /* Process all the INT event until INTR bit is clear. */
1282
1283         if (!(intr0 & INTR)){
1284                 handled = 0;
1285                 goto err_no_interrupt;
1286         }
1287
1288         /* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
1289         writel(intr0, mmio + INT0);
1290
1291         /* Check if Receive Interrupt has occurred. */
1292 #ifdef CONFIG_AMD8111E_NAPI
1293         if(intr0 & RINT0){
1294                 if(netif_rx_schedule_prep(dev)){
1295                         /* Disable receive interupts */
1296                         writel(RINTEN0, mmio + INTEN0);
1297                         /* Schedule a polling routine */
1298                         __netif_rx_schedule(dev);
1299                 }
1300                 else if (intren0 & RINTEN0) {
1301                         printk("************Driver bug! \
1302                                 interrupt while in poll\n");
1303                         /* Fix by disable receive interrupts */
1304                         writel(RINTEN0, mmio + INTEN0);
1305                 }
1306         }
1307 #else
1308         if(intr0 & RINT0){
1309                 amd8111e_rx(dev);
1310                 writel(VAL2 | RDMD0, mmio + CMD0);
1311         }
1312 #endif /* CONFIG_AMD8111E_NAPI */
1313         /* Check if  Transmit Interrupt has occurred. */
1314         if(intr0 & TINT0)
1315                 amd8111e_tx(dev);
1316
1317         /* Check if  Link Change Interrupt has occurred. */
1318         if (intr0 & LCINT)
1319                 amd8111e_link_change(dev);
1320
1321         /* Check if Hardware Timer Interrupt has occurred. */
1322         if (intr0 & STINT)
1323                 amd8111e_calc_coalesce(dev);
1324
1325 err_no_interrupt:
1326         writel( VAL0 | INTREN,mmio + CMD0);
1327
1328         spin_unlock(&lp->lock);
1329
1330         return IRQ_RETVAL(handled);
1331 }
1332
1333 #ifdef CONFIG_NET_POLL_CONTROLLER
1334 static void amd8111e_poll(struct net_device *dev)
1335 {
1336         unsigned long flags;
1337         local_save_flags(flags);
1338         local_irq_disable();
1339         amd8111e_interrupt(0, dev, NULL);
1340         local_irq_restore(flags);
1341 }
1342 #endif
1343
1344
1345 /*
1346 This function closes the network interface and updates the statistics so that most recent statistics will be available after the interface is down.
1347 */
1348 static int amd8111e_close(struct net_device * dev)
1349 {
1350         struct amd8111e_priv *lp = netdev_priv(dev);
1351         netif_stop_queue(dev);
1352
1353         spin_lock_irq(&lp->lock);
1354
1355         amd8111e_disable_interrupt(lp);
1356         amd8111e_stop_chip(lp);
1357         amd8111e_free_ring(lp);
1358
1359         netif_carrier_off(lp->amd8111e_net_dev);
1360
1361         /* Delete ipg timer */
1362         if(lp->options & OPTION_DYN_IPG_ENABLE)
1363                 del_timer_sync(&lp->ipg_data.ipg_timer);
1364
1365         spin_unlock_irq(&lp->lock);
1366         free_irq(dev->irq, dev);
1367
1368         /* Update the statistics before closing */
1369         amd8111e_get_stats(dev);
1370         lp->opened = 0;
1371         return 0;
1372 }
1373 /* This function opens new interface.It requests irq for the device, initializes the device,buffers and descriptors, and starts the device.
1374 */
1375 static int amd8111e_open(struct net_device * dev )
1376 {
1377         struct amd8111e_priv *lp = netdev_priv(dev);
1378
1379         if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
1380                                          dev->name, dev))
1381                 return -EAGAIN;
1382
1383         spin_lock_irq(&lp->lock);
1384
1385         amd8111e_init_hw_default(lp);
1386
1387         if(amd8111e_restart(dev)){
1388                 spin_unlock_irq(&lp->lock);
1389                 if (dev->irq)
1390                         free_irq(dev->irq, dev);
1391                 return -ENOMEM;
1392         }
1393         /* Start ipg timer */
1394         if(lp->options & OPTION_DYN_IPG_ENABLE){
1395                 add_timer(&lp->ipg_data.ipg_timer);
1396                 printk(KERN_INFO "%s: Dynamic IPG Enabled.\n",dev->name);
1397         }
1398
1399         lp->opened = 1;
1400
1401         spin_unlock_irq(&lp->lock);
1402
1403         netif_start_queue(dev);
1404
1405         return 0;
1406 }
1407 /*
1408 This function checks if there is any transmit  descriptors available to queue more packet.
1409 */
1410 static int amd8111e_tx_queue_avail(struct amd8111e_priv* lp )
1411 {
1412         int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
1413         if(lp->tx_skbuff[tx_index] != 0)
1414                 return -1;
1415         else
1416                 return 0;
1417
1418 }
1419 /*
1420 This function will queue the transmit packets to the descriptors and will trigger the send operation. It also initializes the transmit descriptors with buffer physical address, byte count, ownership to hardware etc.
1421 */
1422
1423 static int amd8111e_start_xmit(struct sk_buff *skb, struct net_device * dev)
1424 {
1425         struct amd8111e_priv *lp = netdev_priv(dev);
1426         int tx_index;
1427         unsigned long flags;
1428
1429         spin_lock_irqsave(&lp->lock, flags);
1430
1431         tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
1432
1433         lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
1434
1435         lp->tx_skbuff[tx_index] = skb;
1436         lp->tx_ring[tx_index].tx_flags = 0;
1437
1438 #if AMD8111E_VLAN_TAG_USED
1439         if((lp->vlgrp != NULL) && vlan_tx_tag_present(skb)){
1440                 lp->tx_ring[tx_index].tag_ctrl_cmd |=
1441                                 cpu_to_le16(TCC_VLAN_INSERT);
1442                 lp->tx_ring[tx_index].tag_ctrl_info =
1443                                 cpu_to_le16(vlan_tx_tag_get(skb));
1444
1445         }
1446 #endif
1447         lp->tx_dma_addr[tx_index] =
1448             pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
1449         lp->tx_ring[tx_index].buff_phy_addr =
1450             (u32) cpu_to_le32(lp->tx_dma_addr[tx_index]);
1451
1452         /*  Set FCS and LTINT bits */
1453         wmb();
1454         lp->tx_ring[tx_index].tx_flags |=
1455             cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
1456
1457         lp->tx_idx++;
1458
1459         /* Trigger an immediate send poll. */
1460         writel( VAL1 | TDMD0, lp->mmio + CMD0);
1461         writel( VAL2 | RDMD0,lp->mmio + CMD0);
1462
1463         dev->trans_start = jiffies;
1464
1465         if(amd8111e_tx_queue_avail(lp) < 0){
1466                 netif_stop_queue(dev);
1467         }
1468         spin_unlock_irqrestore(&lp->lock, flags);
1469         return 0;
1470 }
1471 /*
1472 This function returns all the memory mapped registers of the device.
1473 */
1474 static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
1475 {
1476         void __iomem *mmio = lp->mmio;
1477         /* Read only necessary registers */
1478         buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
1479         buf[1] = readl(mmio + XMT_RING_LEN0);
1480         buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
1481         buf[3] = readl(mmio + RCV_RING_LEN0);
1482         buf[4] = readl(mmio + CMD0);
1483         buf[5] = readl(mmio + CMD2);
1484         buf[6] = readl(mmio + CMD3);
1485         buf[7] = readl(mmio + CMD7);
1486         buf[8] = readl(mmio + INT0);
1487         buf[9] = readl(mmio + INTEN0);
1488         buf[10] = readl(mmio + LADRF);
1489         buf[11] = readl(mmio + LADRF+4);
1490         buf[12] = readl(mmio + STAT0);
1491 }
1492
1493 /*
1494 amd8111e crc generator implementation is different from the kernel
1495 ether_crc() function.
1496 */
1497 static int amd8111e_ether_crc(int len, char* mac_addr)
1498 {
1499         int i,byte;
1500         unsigned char octet;
1501         u32 crc= INITCRC;
1502
1503         for(byte=0; byte < len; byte++){
1504                 octet = mac_addr[byte];
1505                 for( i=0;i < 8; i++){
1506                         /*If the next bit form the input stream is 1,subtract                            the divisor (CRC32) from the dividend(crc).*/
1507                         if( (octet & 0x1) ^ (crc & 0x1) ){
1508                                 crc >>= 1;
1509                                 crc ^= CRC32;
1510                         }
1511                         else
1512                                 crc >>= 1;
1513
1514                         octet >>= 1;
1515                 }
1516         }
1517         return crc;
1518 }
1519 /*
1520 This function sets promiscuos mode, all-multi mode or the multicast address
1521 list to the device.
1522 */
1523 static void amd8111e_set_multicast_list(struct net_device *dev)
1524 {
1525         struct dev_mc_list* mc_ptr;
1526         struct amd8111e_priv *lp = netdev_priv(dev);
1527         u32 mc_filter[2] ;
1528         int i,bit_num;
1529         if(dev->flags & IFF_PROMISC){
1530                 writel( VAL2 | PROM, lp->mmio + CMD2);
1531                 return;
1532         }
1533         else
1534                 writel( PROM, lp->mmio + CMD2);
1535         if(dev->flags & IFF_ALLMULTI || dev->mc_count > MAX_FILTER_SIZE){
1536                 /* get all multicast packet */
1537                 mc_filter[1] = mc_filter[0] = 0xffffffff;
1538                 lp->mc_list = dev->mc_list;
1539                 lp->options |= OPTION_MULTICAST_ENABLE;
1540                 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1541                 return;
1542         }
1543         if( dev->mc_count == 0 ){
1544                 /* get only own packets */
1545                 mc_filter[1] = mc_filter[0] = 0;
1546                 lp->mc_list = NULL;
1547                 lp->options &= ~OPTION_MULTICAST_ENABLE;
1548                 amd8111e_writeq(*(u64*)mc_filter,lp->mmio + LADRF);
1549                 /* disable promiscous mode */
1550                 writel(PROM, lp->mmio + CMD2);
1551                 return;
1552         }
1553         /* load all the multicast addresses in the logic filter */
1554         lp->options |= OPTION_MULTICAST_ENABLE;
1555         lp->mc_list = dev->mc_list;
1556         mc_filter[1] = mc_filter[0] = 0;
1557         for (i = 0, mc_ptr = dev->mc_list; mc_ptr && i < dev->mc_count;
1558                      i++, mc_ptr = mc_ptr->next) {
1559                 bit_num = ( amd8111e_ether_crc(ETH_ALEN,mc_ptr->dmi_addr)                                                        >> 26 ) & 0x3f;
1560                 mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
1561         }
1562         amd8111e_writeq(*(u64*)mc_filter,lp->mmio+ LADRF);
1563
1564         /* To eliminate PCI posting bug */
1565         readl(lp->mmio + CMD2);
1566
1567 }
1568
1569 static void amd8111e_get_drvinfo(struct net_device* dev, struct ethtool_drvinfo *info)
1570 {
1571         struct amd8111e_priv *lp = netdev_priv(dev);
1572         struct pci_dev *pci_dev = lp->pci_dev;
1573         strcpy (info->driver, MODULE_NAME);
1574         strcpy (info->version, MODULE_VERS);
1575         sprintf(info->fw_version,"%u",chip_version);
1576         strcpy (info->bus_info, pci_name(pci_dev));
1577 }
1578
1579 static int amd8111e_get_regs_len(struct net_device *dev)
1580 {
1581         return AMD8111E_REG_DUMP_LEN;
1582 }
1583
1584 static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
1585 {
1586         struct amd8111e_priv *lp = netdev_priv(dev);
1587         regs->version = 0;
1588         amd8111e_read_regs(lp, buf);
1589 }
1590
1591 static int amd8111e_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1592 {
1593         struct amd8111e_priv *lp = netdev_priv(dev);
1594         spin_lock_irq(&lp->lock);
1595         mii_ethtool_gset(&lp->mii_if, ecmd);
1596         spin_unlock_irq(&lp->lock);
1597         return 0;
1598 }
1599
1600 static int amd8111e_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
1601 {
1602         struct amd8111e_priv *lp = netdev_priv(dev);
1603         int res;
1604         spin_lock_irq(&lp->lock);
1605         res = mii_ethtool_sset(&lp->mii_if, ecmd);
1606         spin_unlock_irq(&lp->lock);
1607         return res;
1608 }
1609
1610 static int amd8111e_nway_reset(struct net_device *dev)
1611 {
1612         struct amd8111e_priv *lp = netdev_priv(dev);
1613         return mii_nway_restart(&lp->mii_if);
1614 }
1615
1616 static u32 amd8111e_get_link(struct net_device *dev)
1617 {
1618         struct amd8111e_priv *lp = netdev_priv(dev);
1619         return mii_link_ok(&lp->mii_if);
1620 }
1621
1622 static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1623 {
1624         struct amd8111e_priv *lp = netdev_priv(dev);
1625         wol_info->supported = WAKE_MAGIC|WAKE_PHY;
1626         if (lp->options & OPTION_WOL_ENABLE)
1627                 wol_info->wolopts = WAKE_MAGIC;
1628 }
1629
1630 static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
1631 {
1632         struct amd8111e_priv *lp = netdev_priv(dev);
1633         if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
1634                 return -EINVAL;
1635         spin_lock_irq(&lp->lock);
1636         if (wol_info->wolopts & WAKE_MAGIC)
1637                 lp->options |=
1638                         (OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
1639         else if(wol_info->wolopts & WAKE_PHY)
1640                 lp->options |=
1641                         (OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
1642         else
1643                 lp->options &= ~OPTION_WOL_ENABLE;
1644         spin_unlock_irq(&lp->lock);
1645         return 0;
1646 }
1647
1648 static const struct ethtool_ops ops = {
1649         .get_drvinfo = amd8111e_get_drvinfo,
1650         .get_regs_len = amd8111e_get_regs_len,
1651         .get_regs = amd8111e_get_regs,
1652         .get_settings = amd8111e_get_settings,
1653         .set_settings = amd8111e_set_settings,
1654         .nway_reset = amd8111e_nway_reset,
1655         .get_link = amd8111e_get_link,
1656         .get_wol = amd8111e_get_wol,
1657         .set_wol = amd8111e_set_wol,
1658 };
1659
1660 /*
1661 This function handles all the  ethtool ioctls. It gives driver info, gets/sets driver speed, gets memory mapped register values, forces auto negotiation, sets/gets WOL options for ethtool application.
1662 */
1663
1664 static int amd8111e_ioctl(struct net_device * dev , struct ifreq *ifr, int cmd)
1665 {
1666         struct mii_ioctl_data *data = if_mii(ifr);
1667         struct amd8111e_priv *lp = netdev_priv(dev);
1668         int err;
1669         u32 mii_regval;
1670
1671         if (!capable(CAP_NET_ADMIN))
1672                 return -EPERM;
1673
1674         switch(cmd) {
1675         case SIOCGMIIPHY:
1676                 data->phy_id = lp->ext_phy_addr;
1677
1678         /* fallthru */
1679         case SIOCGMIIREG:
1680
1681                 spin_lock_irq(&lp->lock);
1682                 err = amd8111e_read_phy(lp, data->phy_id,
1683                         data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
1684                 spin_unlock_irq(&lp->lock);
1685
1686                 data->val_out = mii_regval;
1687                 return err;
1688
1689         case SIOCSMIIREG:
1690
1691                 spin_lock_irq(&lp->lock);
1692                 err = amd8111e_write_phy(lp, data->phy_id,
1693                         data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
1694                 spin_unlock_irq(&lp->lock);
1695
1696                 return err;
1697
1698         default:
1699                 /* do nothing */
1700                 break;
1701         }
1702         return -EOPNOTSUPP;
1703 }
1704 static int amd8111e_set_mac_address(struct net_device *dev, void *p)
1705 {
1706         struct amd8111e_priv *lp = netdev_priv(dev);
1707         int i;
1708         struct sockaddr *addr = p;
1709
1710         memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
1711         spin_lock_irq(&lp->lock);
1712         /* Setting the MAC address to the device */
1713         for(i = 0; i < ETH_ADDR_LEN; i++)
1714                 writeb( dev->dev_addr[i], lp->mmio + PADR + i );
1715
1716         spin_unlock_irq(&lp->lock);
1717
1718         return 0;
1719 }
1720
1721 /*
1722 This function changes the mtu of the device. It restarts the device  to initialize the descriptor with new receive buffers.
1723 */
1724 static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
1725 {
1726         struct amd8111e_priv *lp = netdev_priv(dev);
1727         int err;
1728
1729         if ((new_mtu < AMD8111E_MIN_MTU) || (new_mtu > AMD8111E_MAX_MTU))
1730                 return -EINVAL;
1731
1732         if (!netif_running(dev)) {
1733                 /* new_mtu will be used
1734                    when device starts netxt time */
1735                 dev->mtu = new_mtu;
1736                 return 0;
1737         }
1738
1739         spin_lock_irq(&lp->lock);
1740
1741         /* stop the chip */
1742         writel(RUN, lp->mmio + CMD0);
1743
1744         dev->mtu = new_mtu;
1745
1746         err = amd8111e_restart(dev);
1747         spin_unlock_irq(&lp->lock);
1748         if(!err)
1749                 netif_start_queue(dev);
1750         return err;
1751 }
1752
1753 #if AMD8111E_VLAN_TAG_USED
1754 static void amd8111e_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
1755 {
1756         struct  amd8111e_priv *lp = netdev_priv(dev);
1757         spin_lock_irq(&lp->lock);
1758         lp->vlgrp = grp;
1759         spin_unlock_irq(&lp->lock);
1760 }
1761
1762 static void amd8111e_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
1763 {
1764         struct amd8111e_priv *lp = netdev_priv(dev);
1765         spin_lock_irq(&lp->lock);
1766         if (lp->vlgrp)
1767                 lp->vlgrp->vlan_devices[vid] = NULL;
1768         spin_unlock_irq(&lp->lock);
1769 }
1770 #endif
1771 static int amd8111e_enable_magicpkt(struct amd8111e_priv* lp)
1772 {
1773         writel( VAL1|MPPLBA, lp->mmio + CMD3);
1774         writel( VAL0|MPEN_SW, lp->mmio + CMD7);
1775
1776         /* To eliminate PCI posting bug */
1777         readl(lp->mmio + CMD7);
1778         return 0;
1779 }
1780
1781 static int amd8111e_enable_link_change(struct amd8111e_priv* lp)
1782 {
1783
1784         /* Adapter is already stoped/suspended/interrupt-disabled */
1785         writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
1786
1787         /* To eliminate PCI posting bug */
1788         readl(lp->mmio + CMD7);
1789         return 0;
1790 }
1791 /* This function is called when a packet transmission fails to complete within a  resonable period, on the assumption that an interrupts have been failed or the  interface is locked up. This function will reinitialize the hardware */
1792
1793 static void amd8111e_tx_timeout(struct net_device *dev)
1794 {
1795         struct amd8111e_priv* lp = netdev_priv(dev);
1796         int err;
1797
1798         printk(KERN_ERR "%s: transmit timed out, resetting\n",
1799                                                       dev->name);
1800         spin_lock_irq(&lp->lock);
1801         err = amd8111e_restart(dev);
1802         spin_unlock_irq(&lp->lock);
1803         if(!err)
1804                 netif_wake_queue(dev);
1805 }
1806 static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
1807 {
1808         struct net_device *dev = pci_get_drvdata(pci_dev);
1809         struct amd8111e_priv *lp = netdev_priv(dev);
1810
1811         if (!netif_running(dev))
1812                 return 0;
1813
1814         /* disable the interrupt */
1815         spin_lock_irq(&lp->lock);
1816         amd8111e_disable_interrupt(lp);
1817         spin_unlock_irq(&lp->lock);
1818
1819         netif_device_detach(dev);
1820
1821         /* stop chip */
1822         spin_lock_irq(&lp->lock);
1823         if(lp->options & OPTION_DYN_IPG_ENABLE)
1824                 del_timer_sync(&lp->ipg_data.ipg_timer);
1825         amd8111e_stop_chip(lp);
1826         spin_unlock_irq(&lp->lock);
1827
1828         if(lp->options & OPTION_WOL_ENABLE){
1829                  /* enable wol */
1830                 if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
1831                         amd8111e_enable_magicpkt(lp);
1832                 if(lp->options & OPTION_WAKE_PHY_ENABLE)
1833                         amd8111e_enable_link_change(lp);
1834
1835                 pci_enable_wake(pci_dev, PCI_D3hot, 1);
1836                 pci_enable_wake(pci_dev, PCI_D3cold, 1);
1837
1838         }
1839         else{
1840                 pci_enable_wake(pci_dev, PCI_D3hot, 0);
1841                 pci_enable_wake(pci_dev, PCI_D3cold, 0);
1842         }
1843
1844         pci_save_state(pci_dev);
1845         pci_set_power_state(pci_dev, PCI_D3hot);
1846
1847         return 0;
1848 }
1849 static int amd8111e_resume(struct pci_dev *pci_dev)
1850 {
1851         struct net_device *dev = pci_get_drvdata(pci_dev);
1852         struct amd8111e_priv *lp = netdev_priv(dev);
1853
1854         if (!netif_running(dev))
1855                 return 0;
1856
1857         pci_set_power_state(pci_dev, PCI_D0);
1858         pci_restore_state(pci_dev);
1859
1860         pci_enable_wake(pci_dev, PCI_D3hot, 0);
1861         pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
1862
1863         netif_device_attach(dev);
1864
1865         spin_lock_irq(&lp->lock);
1866         amd8111e_restart(dev);
1867         /* Restart ipg timer */
1868         if(lp->options & OPTION_DYN_IPG_ENABLE)
1869                 mod_timer(&lp->ipg_data.ipg_timer,
1870                                 jiffies + IPG_CONVERGE_JIFFIES);
1871         spin_unlock_irq(&lp->lock);
1872
1873         return 0;
1874 }
1875
1876
1877 static void __devexit amd8111e_remove_one(struct pci_dev *pdev)
1878 {
1879         struct net_device *dev = pci_get_drvdata(pdev);
1880         if (dev) {
1881                 unregister_netdev(dev);
1882                 iounmap(((struct amd8111e_priv *)netdev_priv(dev))->mmio);
1883                 free_netdev(dev);
1884                 pci_release_regions(pdev);
1885                 pci_disable_device(pdev);
1886                 pci_set_drvdata(pdev, NULL);
1887         }
1888 }
1889 static void amd8111e_config_ipg(struct net_device* dev)
1890 {
1891         struct amd8111e_priv *lp = netdev_priv(dev);
1892         struct ipg_info* ipg_data = &lp->ipg_data;
1893         void __iomem *mmio = lp->mmio;
1894         unsigned int prev_col_cnt = ipg_data->col_cnt;
1895         unsigned int total_col_cnt;
1896         unsigned int tmp_ipg;
1897
1898         if(lp->link_config.duplex == DUPLEX_FULL){
1899                 ipg_data->ipg = DEFAULT_IPG;
1900                 return;
1901         }
1902
1903         if(ipg_data->ipg_state == SSTATE){
1904
1905                 if(ipg_data->timer_tick == IPG_STABLE_TIME){
1906
1907                         ipg_data->timer_tick = 0;
1908                         ipg_data->ipg = MIN_IPG - IPG_STEP;
1909                         ipg_data->current_ipg = MIN_IPG;
1910                         ipg_data->diff_col_cnt = 0xFFFFFFFF;
1911                         ipg_data->ipg_state = CSTATE;
1912                 }
1913                 else
1914                         ipg_data->timer_tick++;
1915         }
1916
1917         if(ipg_data->ipg_state == CSTATE){
1918
1919                 /* Get the current collision count */
1920
1921                 total_col_cnt = ipg_data->col_cnt =
1922                                 amd8111e_read_mib(mmio, xmt_collisions);
1923
1924                 if ((total_col_cnt - prev_col_cnt) <
1925                                 (ipg_data->diff_col_cnt)){
1926
1927                         ipg_data->diff_col_cnt =
1928                                 total_col_cnt - prev_col_cnt ;
1929
1930                         ipg_data->ipg = ipg_data->current_ipg;
1931                 }
1932
1933                 ipg_data->current_ipg += IPG_STEP;
1934
1935                 if (ipg_data->current_ipg <= MAX_IPG)
1936                         tmp_ipg = ipg_data->current_ipg;
1937                 else{
1938                         tmp_ipg = ipg_data->ipg;
1939                         ipg_data->ipg_state = SSTATE;
1940                 }
1941                 writew((u32)tmp_ipg, mmio + IPG);
1942                 writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
1943         }
1944          mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
1945         return;
1946
1947 }
1948
1949 static void __devinit amd8111e_probe_ext_phy(struct net_device* dev)
1950 {
1951         struct amd8111e_priv *lp = netdev_priv(dev);
1952         int i;
1953
1954         for (i = 0x1e; i >= 0; i--) {
1955                 u32 id1, id2;
1956
1957                 if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
1958                         continue;
1959                 if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
1960                         continue;
1961                 lp->ext_phy_id = (id1 << 16) | id2;
1962                 lp->ext_phy_addr = i;
1963                 return;
1964         }
1965         lp->ext_phy_id = 0;
1966         lp->ext_phy_addr = 1;
1967 }
1968
1969 static int __devinit amd8111e_probe_one(struct pci_dev *pdev,
1970                                   const struct pci_device_id *ent)
1971 {
1972         int err,i,pm_cap;
1973         unsigned long reg_addr,reg_len;
1974         struct amd8111e_priv* lp;
1975         struct net_device* dev;
1976
1977         err = pci_enable_device(pdev);
1978         if(err){
1979                 printk(KERN_ERR "amd8111e: Cannot enable new PCI device,"
1980                         "exiting.\n");
1981                 return err;
1982         }
1983
1984         if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
1985                 printk(KERN_ERR "amd8111e: Cannot find PCI base address"
1986                        "exiting.\n");
1987                 err = -ENODEV;
1988                 goto err_disable_pdev;
1989         }
1990
1991         err = pci_request_regions(pdev, MODULE_NAME);
1992         if(err){
1993                 printk(KERN_ERR "amd8111e: Cannot obtain PCI resources, "
1994                        "exiting.\n");
1995                 goto err_disable_pdev;
1996         }
1997
1998         pci_set_master(pdev);
1999
2000         /* Find power-management capability. */
2001         if((pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM))==0){
2002                 printk(KERN_ERR "amd8111e: No Power Management capability, "
2003                        "exiting.\n");
2004                 goto err_free_reg;
2005         }
2006
2007         /* Initialize DMA */
2008         if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) < 0) {
2009                 printk(KERN_ERR "amd8111e: DMA not supported,"
2010                         "exiting.\n");
2011                 goto err_free_reg;
2012         }
2013
2014         reg_addr = pci_resource_start(pdev, 0);
2015         reg_len = pci_resource_len(pdev, 0);
2016
2017         dev = alloc_etherdev(sizeof(struct amd8111e_priv));
2018         if (!dev) {
2019                 printk(KERN_ERR "amd8111e: Etherdev alloc failed, exiting.\n");
2020                 err = -ENOMEM;
2021                 goto err_free_reg;
2022         }
2023
2024         SET_MODULE_OWNER(dev);
2025         SET_NETDEV_DEV(dev, &pdev->dev);
2026
2027 #if AMD8111E_VLAN_TAG_USED
2028         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX ;
2029         dev->vlan_rx_register =amd8111e_vlan_rx_register;
2030         dev->vlan_rx_kill_vid = amd8111e_vlan_rx_kill_vid;
2031 #endif
2032
2033         lp = netdev_priv(dev);
2034         lp->pci_dev = pdev;
2035         lp->amd8111e_net_dev = dev;
2036         lp->pm_cap = pm_cap;
2037
2038         spin_lock_init(&lp->lock);
2039
2040         lp->mmio = ioremap(reg_addr, reg_len);
2041         if (lp->mmio == 0) {
2042                 printk(KERN_ERR "amd8111e: Cannot map device registers, "
2043                        "exiting\n");
2044                 err = -ENOMEM;
2045                 goto err_free_dev;
2046         }
2047
2048         /* Initializing MAC address */
2049         for(i = 0; i < ETH_ADDR_LEN; i++)
2050                         dev->dev_addr[i] =readb(lp->mmio + PADR + i);
2051
2052         /* Setting user defined parametrs */
2053         lp->ext_phy_option = speed_duplex[card_idx];
2054         if(coalesce[card_idx])
2055                 lp->options |= OPTION_INTR_COAL_ENABLE;
2056         if(dynamic_ipg[card_idx++])
2057                 lp->options |= OPTION_DYN_IPG_ENABLE;
2058
2059         /* Initialize driver entry points */
2060         dev->open = amd8111e_open;
2061         dev->hard_start_xmit = amd8111e_start_xmit;
2062         dev->stop = amd8111e_close;
2063         dev->get_stats = amd8111e_get_stats;
2064         dev->set_multicast_list = amd8111e_set_multicast_list;
2065         dev->set_mac_address = amd8111e_set_mac_address;
2066         dev->do_ioctl = amd8111e_ioctl;
2067         dev->change_mtu = amd8111e_change_mtu;
2068         SET_ETHTOOL_OPS(dev, &ops);
2069         dev->irq =pdev->irq;
2070         dev->tx_timeout = amd8111e_tx_timeout;
2071         dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
2072 #ifdef CONFIG_AMD8111E_NAPI
2073         dev->poll = amd8111e_rx_poll;
2074         dev->weight = 32;
2075 #endif
2076 #ifdef CONFIG_NET_POLL_CONTROLLER
2077         dev->poll_controller = amd8111e_poll;
2078 #endif
2079
2080 #if AMD8111E_VLAN_TAG_USED
2081         dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
2082         dev->vlan_rx_register =amd8111e_vlan_rx_register;
2083         dev->vlan_rx_kill_vid = amd8111e_vlan_rx_kill_vid;
2084 #endif
2085         /* Probe the external PHY */
2086         amd8111e_probe_ext_phy(dev);
2087
2088         /* setting mii default values */
2089         lp->mii_if.dev = dev;
2090         lp->mii_if.mdio_read = amd8111e_mdio_read;
2091         lp->mii_if.mdio_write = amd8111e_mdio_write;
2092         lp->mii_if.phy_id = lp->ext_phy_addr;
2093
2094         /* Set receive buffer length and set jumbo option*/
2095         amd8111e_set_rx_buff_len(dev);
2096
2097
2098         err = register_netdev(dev);
2099         if (err) {
2100                 printk(KERN_ERR "amd8111e: Cannot register net device, "
2101                        "exiting.\n");
2102                 goto err_iounmap;
2103         }
2104
2105         pci_set_drvdata(pdev, dev);
2106
2107         /* Initialize software ipg timer */
2108         if(lp->options & OPTION_DYN_IPG_ENABLE){
2109                 init_timer(&lp->ipg_data.ipg_timer);
2110                 lp->ipg_data.ipg_timer.data = (unsigned long) dev;
2111                 lp->ipg_data.ipg_timer.function = (void *)&amd8111e_config_ipg;
2112                 lp->ipg_data.ipg_timer.expires = jiffies +
2113                                                  IPG_CONVERGE_JIFFIES;
2114                 lp->ipg_data.ipg = DEFAULT_IPG;
2115                 lp->ipg_data.ipg_state = CSTATE;
2116         };
2117
2118         /*  display driver and device information */
2119
2120         chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
2121         printk(KERN_INFO "%s: AMD-8111e Driver Version: %s\n",                                                           dev->name,MODULE_VERS);
2122         printk(KERN_INFO "%s: [ Rev %x ] PCI 10/100BaseT Ethernet ",                                                    dev->name, chip_version);
2123         for (i = 0; i < 6; i++)
2124                 printk("%2.2x%c",dev->dev_addr[i],i == 5 ? ' ' : ':');
2125         printk( "\n");
2126         if (lp->ext_phy_id)
2127                 printk(KERN_INFO "%s: Found MII PHY ID 0x%08x at address 0x%02x\n",
2128                        dev->name, lp->ext_phy_id, lp->ext_phy_addr);
2129         else
2130                 printk(KERN_INFO "%s: Couldn't detect MII PHY, assuming address 0x01\n",
2131                        dev->name);
2132         return 0;
2133 err_iounmap:
2134         iounmap(lp->mmio);
2135
2136 err_free_dev:
2137         free_netdev(dev);
2138
2139 err_free_reg:
2140         pci_release_regions(pdev);
2141
2142 err_disable_pdev:
2143         pci_disable_device(pdev);
2144         pci_set_drvdata(pdev, NULL);
2145         return err;
2146
2147 }
2148
2149 static struct pci_driver amd8111e_driver = {
2150         .name           = MODULE_NAME,
2151         .id_table       = amd8111e_pci_tbl,
2152         .probe          = amd8111e_probe_one,
2153         .remove         = __devexit_p(amd8111e_remove_one),
2154         .suspend        = amd8111e_suspend,
2155         .resume         = amd8111e_resume
2156 };
2157
2158 static int __init amd8111e_init(void)
2159 {
2160         return pci_register_driver(&amd8111e_driver);
2161 }
2162
2163 static void __exit amd8111e_cleanup(void)
2164 {
2165         pci_unregister_driver(&amd8111e_driver);
2166 }
2167
2168 module_init(amd8111e_init);
2169 module_exit(amd8111e_cleanup);