git.oblomov.eu Git - linux-2.6/blob - drivers/usb/host/ohci-at91.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  *  Copyright (C) 2004 SAN People (Pty) Ltd.
   5  *  Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
   6  *
   7  * AT91 Bus Glue
   8  *
   9  * Based on fragments of 2.4 driver by Rick Bronson.
  10  * Based on ohci-omap.c
  11  *
  12  * This file is licenced under the GPL.
  13  */
  14
  15 #include <linux/clk.h>
  16 #include <linux/platform_device.h>
  17
  18 #include <asm/mach-types.h>
  19 #include <asm/hardware.h>
  20 #include <asm/gpio.h>
  21
  22 #include <asm/arch/board.h>
  23 #include <asm/arch/cpu.h>
  24
  25 #ifndef CONFIG_ARCH_AT91
  26 #error "CONFIG_ARCH_AT91 must be defined."
  27 #endif
  28
  29 /* interface and function clocks; sometimes also an AHB clock */
  30 static struct clk *iclk, *fclk, *hclk;
  31 static int clocked;
  32
  33 extern int usb_disabled(void);
  34
  35 /*-------------------------------------------------------------------------*/
  36
  37 static void at91_start_clock(void)
  38 {
  39         if (cpu_is_at91sam9261())
  40                 clk_enable(hclk);
  41         clk_enable(iclk);
  42         clk_enable(fclk);
  43         clocked = 1;
  44 }
  45
  46 static void at91_stop_clock(void)
  47 {
  48         clk_disable(fclk);
  49         clk_disable(iclk);
  50         if (cpu_is_at91sam9261())
  51                 clk_disable(hclk);
  52         clocked = 0;
  53 }
  54
  55 static void at91_start_hc(struct platform_device *pdev)
  56 {
  57         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  58         struct ohci_regs __iomem *regs = hcd->regs;
  59
  60         dev_dbg(&pdev->dev, "start\n");
  61
  62         /*
  63          * Start the USB clocks.
  64          */
  65         at91_start_clock();
  66
  67         /*
  68          * The USB host controller must remain in reset.
  69          */
  70         writel(0, &regs->control);
  71 }
  72
  73 static void at91_stop_hc(struct platform_device *pdev)
  74 {
  75         struct usb_hcd *hcd = platform_get_drvdata(pdev);
  76         struct ohci_regs __iomem *regs = hcd->regs;
  77
  78         dev_dbg(&pdev->dev, "stop\n");
  79
  80         /*
  81          * Put the USB host controller into reset.
  82          */
  83         writel(0, &regs->control);
  84
  85         /*
  86          * Stop the USB clocks.
  87          */
  88         at91_stop_clock();
  89 }
  90
  91
  92 /*-------------------------------------------------------------------------*/
  93
  94 static int usb_hcd_at91_remove (struct usb_hcd *, struct platform_device *);
  95
  96 /* configure so an HC device and id are always provided */
  97 /* always called with process context; sleeping is OK */
  98
  99
 100 /**
 101  * usb_hcd_at91_probe - initialize AT91-based HCDs
 102  * Context: !in_interrupt()
 103  *
 104  * Allocates basic resources for this USB host controller, and
 105  * then invokes the start() method for the HCD associated with it
 106  * through the hotplug entry's driver_data.
 107  */
 108 static int usb_hcd_at91_probe(const struct hc_driver *driver,
 109                         struct platform_device *pdev)
 110 {
 111         int retval;
 112         struct usb_hcd *hcd = NULL;
 113
 114         if (pdev->num_resources != 2) {
 115                 pr_debug("hcd probe: invalid num_resources");
 116                 return -ENODEV;
 117         }
 118
 119         if ((pdev->resource[0].flags != IORESOURCE_MEM)
 120                         || (pdev->resource[1].flags != IORESOURCE_IRQ)) {
 121                 pr_debug("hcd probe: invalid resource type\n");
 122                 return -ENODEV;
 123         }
 124
 125         hcd = usb_create_hcd(driver, &pdev->dev, "at91");
 126         if (!hcd)
 127                 return -ENOMEM;
 128         hcd->rsrc_start = pdev->resource[0].start;
 129         hcd->rsrc_len = pdev->resource[0].end - pdev->resource[0].start + 1;
 130
 131         if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
 132                 pr_debug("request_mem_region failed\n");
 133                 retval = -EBUSY;
 134                 goto err1;
 135         }
 136
 137         hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 138         if (!hcd->regs) {
 139                 pr_debug("ioremap failed\n");
 140                 retval = -EIO;
 141                 goto err2;
 142         }
 143
 144         iclk = clk_get(&pdev->dev, "ohci_clk");
 145         fclk = clk_get(&pdev->dev, "uhpck");
 146         if (cpu_is_at91sam9261())
 147                 hclk = clk_get(&pdev->dev, "hck0");
 148
 149         at91_start_hc(pdev);
 150         ohci_hcd_init(hcd_to_ohci(hcd));
 151
 152         retval = usb_add_hcd(hcd, pdev->resource[1].start, IRQF_DISABLED);
 153         if (retval == 0)
 154                 return retval;
 155
 156         /* Error handling */
 157         at91_stop_hc(pdev);
 158
 159         if (cpu_is_at91sam9261())
 160                 clk_put(hclk);
 161         clk_put(fclk);
 162         clk_put(iclk);
 163
 164         iounmap(hcd->regs);
 165
 166  err2:
 167         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 168
 169  err1:
 170         usb_put_hcd(hcd);
 171         return retval;
 172 }
 173
 174
 175 /* may be called with controller, bus, and devices active */
 176
 177 /**
 178  * usb_hcd_at91_remove - shutdown processing for AT91-based HCDs
 179  * @dev: USB Host Controller being removed
 180  * Context: !in_interrupt()
 181  *
 182  * Reverses the effect of usb_hcd_at91_probe(), first invoking
 183  * the HCD's stop() method.  It is always called from a thread
 184  * context, "rmmod" or something similar.
 185  *
 186  */
 187 static int usb_hcd_at91_remove(struct usb_hcd *hcd,
 188                                 struct platform_device *pdev)
 189 {
 190         usb_remove_hcd(hcd);
 191         at91_stop_hc(pdev);
 192         iounmap(hcd->regs);
 193         release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
 194
 195         if (cpu_is_at91sam9261())
 196                 clk_put(hclk);
 197         clk_put(fclk);
 198         clk_put(iclk);
 199         fclk = iclk = hclk = NULL;
 200
 201         dev_set_drvdata(&pdev->dev, NULL);
 202         return 0;
 203 }
 204
 205 /*-------------------------------------------------------------------------*/
 206
 207 static int __devinit
 208 ohci_at91_start (struct usb_hcd *hcd)
 209 {
 210         struct at91_usbh_data   *board = hcd->self.controller->platform_data;
 211         struct ohci_hcd         *ohci = hcd_to_ohci (hcd);
 212         int                     ret;
 213
 214         if ((ret = ohci_init(ohci)) < 0)
 215                 return ret;
 216
 217         ohci->num_ports = board->ports;
 218
 219         if ((ret = ohci_run(ohci)) < 0) {
 220                 err("can't start %s", hcd->self.bus_name);
 221                 ohci_stop(hcd);
 222                 return ret;
 223         }
 224         return 0;
 225 }
 226
 227 /*-------------------------------------------------------------------------*/
 228
 229 static const struct hc_driver ohci_at91_hc_driver = {
 230         .description =          hcd_name,
 231         .product_desc =         "AT91 OHCI",
 232         .hcd_priv_size =        sizeof(struct ohci_hcd),
 233
 234         /*
 235          * generic hardware linkage
 236          */
 237         .irq =                  ohci_irq,
 238         .flags =                HCD_USB11 | HCD_MEMORY,
 239
 240         /*
 241          * basic lifecycle operations
 242          */
 243         .start =                ohci_at91_start,
 244         .stop =                 ohci_stop,
 245         .shutdown =             ohci_shutdown,
 246
 247         /*
 248          * managing i/o requests and associated device resources
 249          */
 250         .urb_enqueue =          ohci_urb_enqueue,
 251         .urb_dequeue =          ohci_urb_dequeue,
 252         .endpoint_disable =     ohci_endpoint_disable,
 253
 254         /*
 255          * scheduling support
 256          */
 257         .get_frame_number =     ohci_get_frame,
 258
 259         /*
 260          * root hub support
 261          */
 262         .hub_status_data =      ohci_hub_status_data,
 263         .hub_control =          ohci_hub_control,
 264         .hub_irq_enable =       ohci_rhsc_enable,
 265 #ifdef CONFIG_PM
 266         .bus_suspend =          ohci_bus_suspend,
 267         .bus_resume =           ohci_bus_resume,
 268 #endif
 269         .start_port_reset =     ohci_start_port_reset,
 270 };
 271
 272 /*-------------------------------------------------------------------------*/
 273
 274 static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
 275 {
 276         struct at91_usbh_data   *pdata = pdev->dev.platform_data;
 277         int                     i;
 278
 279         if (pdata) {
 280                 /* REVISIT make the driver support per-port power switching,
 281                  * and also overcurrent detection.  Here we assume the ports
 282                  * are always powered while this driver is active, and use
 283                  * active-low power switches.
 284                  */
 285                 for (i = 0; i < pdata->ports; i++) {
 286                         if (pdata->vbus_pin[i] <= 0)
 287                                 continue;
 288                         gpio_request(pdata->vbus_pin[i], "ohci_vbus");
 289                         gpio_direction_output(pdata->vbus_pin[i], 0);
 290                 }
 291         }
 292
 293         device_init_wakeup(&pdev->dev, 1);
 294         return usb_hcd_at91_probe(&ohci_at91_hc_driver, pdev);
 295 }
 296
 297 static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
 298 {
 299         struct at91_usbh_data   *pdata = pdev->dev.platform_data;
 300         int                     i;
 301
 302         if (pdata) {
 303                 for (i = 0; i < pdata->ports; i++) {
 304                         if (pdata->vbus_pin[i] <= 0)
 305                                 continue;
 306                         gpio_direction_output(pdata->vbus_pin[i], 1);
 307                         gpio_free(pdata->vbus_pin[i]);
 308                 }
 309         }
 310
 311         device_init_wakeup(&pdev->dev, 0);
 312         return usb_hcd_at91_remove(platform_get_drvdata(pdev), pdev);
 313 }
 314
 315 #ifdef CONFIG_PM
 316
 317 static int
 318 ohci_hcd_at91_drv_suspend(struct platform_device *pdev, pm_message_t mesg)
 319 {
 320         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 321         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 322
 323         if (device_may_wakeup(&pdev->dev))
 324                 enable_irq_wake(hcd->irq);
 325
 326         /*
 327          * The integrated transceivers seem unable to notice disconnect,
 328          * reconnect, or wakeup without the 48 MHz clock active.  so for
 329          * correctness, always discard connection state (using reset).
 330          *
 331          * REVISIT: some boards will be able to turn VBUS off...
 332          */
 333         if (at91_suspend_entering_slow_clock()) {
 334                 ohci_usb_reset (ohci);
 335                 at91_stop_clock();
 336         }
 337
 338         return 0;
 339 }
 340
 341 static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
 342 {
 343         struct usb_hcd  *hcd = platform_get_drvdata(pdev);
 344
 345         if (device_may_wakeup(&pdev->dev))
 346                 disable_irq_wake(hcd->irq);
 347
 348         if (!clocked)
 349                 at91_start_clock();
 350
 351         return 0;
 352 }
 353 #else
 354 #define ohci_hcd_at91_drv_suspend NULL
 355 #define ohci_hcd_at91_drv_resume  NULL
 356 #endif
 357
 358 MODULE_ALIAS("platform:at91_ohci");
 359
 360 static struct platform_driver ohci_hcd_at91_driver = {
 361         .probe          = ohci_hcd_at91_drv_probe,
 362         .remove         = ohci_hcd_at91_drv_remove,
 363         .shutdown       = usb_hcd_platform_shutdown,
 364         .suspend        = ohci_hcd_at91_drv_suspend,
 365         .resume         = ohci_hcd_at91_drv_resume,
 366         .driver         = {
 367                 .name   = "at91_ohci",
 368                 .owner  = THIS_MODULE,
 369         },
 370 };