2 * PowerPC hash table management proc entry. Will show information
3 * about the current hash table and will allow changes to it.
5 * Written by Cort Dougan (cort@cs.nmt.edu)
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License
9 * as published by the Free Software Foundation; either version
10 * 2 of the License, or (at your option) any later version.
13 #include <linux/config.h>
14 #include <linux/errno.h>
15 #include <linux/sched.h>
16 #include <linux/proc_fs.h>
17 #include <linux/stat.h>
18 #include <linux/sysctl.h>
19 #include <linux/ctype.h>
20 #include <linux/threads.h>
21 #include <linux/smp_lock.h>
22 #include <linux/seq_file.h>
23 #include <linux/init.h>
24 #include <linux/bitops.h>
26 #include <asm/uaccess.h>
28 #include <asm/residual.h>
30 #include <asm/pgtable.h>
31 #include <asm/cputable.h>
32 #include <asm/system.h>
35 static int ppc_htab_show(struct seq_file *m, void *v);
36 static ssize_t ppc_htab_write(struct file * file, const char __user * buffer,
37 size_t count, loff_t *ppos);
38 extern PTE *Hash, *Hash_end;
39 extern unsigned long Hash_size, Hash_mask;
40 extern unsigned long _SDR1;
41 extern unsigned long htab_reloads;
42 extern unsigned long htab_preloads;
43 extern unsigned long htab_evicts;
44 extern unsigned long pte_misses;
45 extern unsigned long pte_errors;
46 extern unsigned int primary_pteg_full;
47 extern unsigned int htab_hash_searches;
49 static int ppc_htab_open(struct inode *inode, struct file *file)
51 return single_open(file, ppc_htab_show, NULL);
54 struct file_operations ppc_htab_operations = {
55 .open = ppc_htab_open,
58 .write = ppc_htab_write,
59 .release = single_release,
62 static char *pmc1_lookup(unsigned long mmcr0)
64 switch ( mmcr0 & (0x7f<<7) )
68 case MMCR0_PMC1_CYCLES:
70 case MMCR0_PMC1_ICACHEMISS:
79 static char *pmc2_lookup(unsigned long mmcr0)
81 switch ( mmcr0 & 0x3f )
85 case MMCR0_PMC2_CYCLES:
87 case MMCR0_PMC2_DCACHEMISS:
91 case MMCR0_PMC2_LOADMISSTIME:
92 return "load miss time";
99 * print some useful info about the hash table. This function
100 * is _REALLY_ slow (see the nested for loops below) but nothing
101 * in here should be really timing critical. -- Cort
103 static int ppc_htab_show(struct seq_file *m, void *v)
105 unsigned long mmcr0 = 0, pmc1 = 0, pmc2 = 0;
106 #if defined(CONFIG_PPC_STD_MMU) && !defined(CONFIG_PPC64BRIDGE)
107 unsigned int kptes = 0, uptes = 0;
109 #endif /* CONFIG_PPC_STD_MMU */
111 if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
112 mmcr0 = mfspr(SPRN_MMCR0);
113 pmc1 = mfspr(SPRN_PMC1);
114 pmc2 = mfspr(SPRN_PMC2);
116 "604 Performance Monitoring\n"
117 "MMCR0\t\t: %08lx %s%s ",
119 ( mmcr0>>28 & 0x2 ) ? "(user mode counted)" : "",
120 ( mmcr0>>28 & 0x4 ) ? "(kernel mode counted)" : "");
122 "\nPMC1\t\t: %08lx (%s)\n"
123 "PMC2\t\t: %08lx (%s)\n",
124 pmc1, pmc1_lookup(mmcr0),
125 pmc2, pmc2_lookup(mmcr0));
128 #ifdef CONFIG_PPC_STD_MMU
129 /* if we don't have a htab */
130 if ( Hash_size == 0 ) {
131 seq_printf(m, "No Hash Table used\n");
135 #ifndef CONFIG_PPC64BRIDGE
136 for (ptr = Hash; ptr < Hash_end; ptr++) {
137 unsigned int mctx, vsid;
141 /* undo the esid skew */
143 mctx = ((vsid - (vsid & 0xf) * 0x111) >> 4) & 0xfffff;
152 "PTE Hash Table Information\n"
155 "Address\t\t: %08lx\n"
157 #ifndef CONFIG_PPC64BRIDGE
159 "Kernel ptes\t: %u\n"
160 "Percent full\t: %lu%%\n"
162 , (unsigned long)(Hash_size>>10),
163 (Hash_size/(sizeof(PTE)*8)),
165 Hash_size/sizeof(PTE)
166 #ifndef CONFIG_PPC64BRIDGE
169 ((kptes+uptes)*100) / (Hash_size/sizeof(PTE))
179 htab_reloads, htab_preloads, htab_hash_searches,
180 primary_pteg_full, htab_evicts);
181 #endif /* CONFIG_PPC_STD_MMU */
184 "Non-error misses: %lu\n"
185 "Error misses\t: %lu\n",
186 pte_misses, pte_errors);
191 * Allow user to define performance counters and resize the hash table
193 static ssize_t ppc_htab_write(struct file * file, const char __user * ubuffer,
194 size_t count, loff_t *ppos)
196 #ifdef CONFIG_PPC_STD_MMU
200 if (!capable(CAP_SYS_ADMIN))
202 if (strncpy_from_user(buffer, ubuffer, 15))
206 /* don't set the htab size for now */
207 if ( !strncmp( buffer, "size ", 5) )
210 if ( !strncmp( buffer, "reset", 5) )
212 if (cpu_has_feature(CPU_FTR_604_PERF_MON)) {
213 /* reset PMC1 and PMC2 */
223 /* Everything below here requires the performance monitor feature. */
224 if (!cpu_has_feature(CPU_FTR_604_PERF_MON))
227 /* turn off performance monitoring */
228 if ( !strncmp( buffer, "off", 3) )
230 mtspr(SPRN_MMCR0, 0);
235 if ( !strncmp( buffer, "user", 4) )
237 /* setup mmcr0 and clear the correct pmc */
238 tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x20000000;
239 mtspr(SPRN_MMCR0, tmp);
244 if ( !strncmp( buffer, "kernel", 6) )
246 /* setup mmcr0 and clear the correct pmc */
247 tmp = (mfspr(SPRN_MMCR0) & ~(0x60000000)) | 0x40000000;
248 mtspr(SPRN_MMCR0, tmp);
254 if ( !strncmp( buffer, "dtlb", 4) )
256 /* setup mmcr0 and clear the correct pmc */
257 tmp = (mfspr(SPRN_MMCR0) & ~(0x7F << 7)) | MMCR0_PMC1_DTLB;
258 mtspr(SPRN_MMCR0, tmp);
262 if ( !strncmp( buffer, "ic miss", 7) )
264 /* setup mmcr0 and clear the correct pmc */
265 tmp = (mfspr(SPRN_MMCR0) & ~(0x7F<<7)) | MMCR0_PMC1_ICACHEMISS;
266 mtspr(SPRN_MMCR0, tmp);
271 if ( !strncmp( buffer, "load miss time", 14) )
273 /* setup mmcr0 and clear the correct pmc */
275 "mfspr %0,%1\n\t" /* get current mccr0 */
276 "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
277 "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
278 "mtspr %1,%0 \n\t" /* set new mccr0 */
279 "mtspr %3,%4 \n\t" /* reset the pmc */
282 "i" (MMCR0_PMC2_LOADMISSTIME),
283 "i" (SPRN_PMC2), "r" (0) );
286 if ( !strncmp( buffer, "itlb", 4) )
288 /* setup mmcr0 and clear the correct pmc */
290 "mfspr %0,%1\n\t" /* get current mccr0 */
291 "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
292 "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
293 "mtspr %1,%0 \n\t" /* set new mccr0 */
294 "mtspr %3,%4 \n\t" /* reset the pmc */
296 : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_ITLB),
297 "i" (SPRN_PMC2), "r" (0) );
300 if ( !strncmp( buffer, "dc miss", 7) )
302 /* setup mmcr0 and clear the correct pmc */
304 "mfspr %0,%1\n\t" /* get current mccr0 */
305 "rlwinm %0,%0,0,0,31-6\n\t" /* clear bits [26-31] */
306 "ori %0,%0,%2 \n\t" /* or in mmcr0 settings */
307 "mtspr %1,%0 \n\t" /* set new mccr0 */
308 "mtspr %3,%4 \n\t" /* reset the pmc */
310 : "i" (SPRN_MMCR0), "i" (MMCR0_PMC2_DCACHEMISS),
311 "i" (SPRN_PMC2), "r" (0) );
315 #else /* CONFIG_PPC_STD_MMU */
317 #endif /* CONFIG_PPC_STD_MMU */
320 int proc_dol2crvec(ctl_table *table, int write, struct file *filp,
321 void __user *buffer_arg, size_t *lenp, loff_t *ppos)
323 int vleft, first=1, len, left, val;
324 char __user *buffer = (char __user *) buffer_arg;
325 #define TMPBUFLEN 256
326 char buf[TMPBUFLEN], *p;
327 static const char *sizestrings[4] = {
328 "2MB", "256KB", "512KB", "1MB"
330 static const char *clockstrings[8] = {
331 "clock disabled", "+1 clock", "+1.5 clock", "reserved(3)",
332 "+2 clock", "+2.5 clock", "+3 clock", "reserved(7)"
334 static const char *typestrings[4] = {
335 "flow-through burst SRAM", "reserved SRAM",
336 "pipelined burst SRAM", "pipelined late-write SRAM"
338 static const char *holdstrings[4] = {
339 "0.5", "1.0", "(reserved2)", "(reserved3)"
342 if (!cpu_has_feature(CPU_FTR_L2CR))
345 if ( /*!table->maxlen ||*/ (*ppos && !write)) {
350 vleft = table->maxlen / sizeof(int);
353 for (; left /*&& vleft--*/; first=0) {
357 if(get_user(c, buffer))
367 if (len > TMPBUFLEN-1)
369 if(copy_from_user(buf, buffer, len))
373 if (*p < '0' || *p > '9')
375 val = simple_strtoul(p, &p, 0);
377 if ((len < left) && *p && !isspace(*p))
387 p += sprintf(p, "0x%08x: ", val);
388 p += sprintf(p, " %s", (val >> 31) & 1 ? "enabled" :
390 p += sprintf(p, ", %sparity", (val>>30)&1 ? "" : "no ");
391 p += sprintf(p, ", %s", sizestrings[(val >> 28) & 3]);
392 p += sprintf(p, ", %s", clockstrings[(val >> 25) & 7]);
393 p += sprintf(p, ", %s", typestrings[(val >> 23) & 2]);
394 p += sprintf(p, "%s", (val>>22)&1 ? ", data only" : "");
395 p += sprintf(p, "%s", (val>>20)&1 ? ", ZZ enabled": "");
396 p += sprintf(p, ", %s", (val>>19)&1 ? "write-through" :
398 p += sprintf(p, "%s", (val>>18)&1 ? ", testing" : "");
399 p += sprintf(p, ", %sns hold",holdstrings[(val>>16)&3]);
400 p += sprintf(p, "%s", (val>>15)&1 ? ", DLL slow" : "");
401 p += sprintf(p, "%s", (val>>14)&1 ? ", diff clock" :"");
402 p += sprintf(p, "%s", (val>>13)&1 ? ", DLL bypass" :"");
404 p += sprintf(p,"\n");
409 if (copy_to_user(buffer, buf, len))
417 if (!write && !first && left) {
418 if(put_user('\n', (char __user *) buffer))
423 char __user *s = (char __user *) buffer;
442 * Register our sysctl.
444 static ctl_table htab_ctl_table[]={
446 .ctl_name = KERN_PPC_L2CR,
449 .proc_handler = &proc_dol2crvec,
453 static ctl_table htab_sysctl_root[] = {
454 { 1, "kernel", NULL, 0, 0755, htab_ctl_table, },
459 register_ppc_htab_sysctl(void)
461 register_sysctl_table(htab_sysctl_root, 0);
466 __initcall(register_ppc_htab_sysctl);