2 * This file is part of linux driver the digital TV devices equipped with B2C2 FlexcopII(b)/III
4 * flexcop-fe-tuner.c - methods for attaching a frontend and controlling DiSEqC.
6 * see flexcop.c for copyright information.
22 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
24 struct flexcop_device *fc = fe->dvb->priv;
26 deb_tuner("polarity/voltage = %u\n", voltage);
28 v = fc->read_ibi_reg(fc, misc_204);
31 v.misc_204.ACPI1_sig = 1;
34 v.misc_204.ACPI1_sig = 0;
35 v.misc_204.LNB_L_H_sig = 0;
38 v.misc_204.ACPI1_sig = 0;
39 v.misc_204.LNB_L_H_sig = 1;
42 err("unknown SEC_VOLTAGE value");
45 return fc->write_ibi_reg(fc, misc_204, v);
48 static int flexcop_sleep(struct dvb_frontend* fe)
50 struct flexcop_device *fc = fe->dvb->priv;
51 /* flexcop_ibi_value v = fc->read_ibi_reg(fc,misc_204); */
54 return fc->fe_sleep(fe);
56 /* v.misc_204.ACPI3_sig = 1;
57 fc->write_ibi_reg(fc,misc_204,v);*/
62 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
64 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
65 struct flexcop_device *fc = fe->dvb->priv;
70 deb_tuner("tone = %u\n",tone);
80 err("unknown SEC_TONE value");
84 v.lnb_switch_freq_200.LNB_CTLPrescaler_sig = 1; /* divide by 2 */
86 v.lnb_switch_freq_200.LNB_CTLHighCount_sig = ax;
87 v.lnb_switch_freq_200.LNB_CTLLowCount_sig = ax == 0 ? 0x1ff : ax;
89 return fc->write_ibi_reg(fc,lnb_switch_freq_200,v);
92 static void flexcop_diseqc_send_bit(struct dvb_frontend* fe, int data)
94 flexcop_set_tone(fe, SEC_TONE_ON);
95 udelay(data ? 500 : 1000);
96 flexcop_set_tone(fe, SEC_TONE_OFF);
97 udelay(data ? 1000 : 500);
100 static void flexcop_diseqc_send_byte(struct dvb_frontend* fe, int data)
104 for (i = 7; i >= 0; i--) {
107 flexcop_diseqc_send_bit(fe, d);
110 flexcop_diseqc_send_bit(fe, par);
113 static int flexcop_send_diseqc_msg(struct dvb_frontend* fe, int len, u8 *msg, unsigned long burst)
117 flexcop_set_tone(fe, SEC_TONE_OFF);
120 for (i = 0; i < len; i++)
121 flexcop_diseqc_send_byte(fe,msg[i]);
127 flexcop_diseqc_send_byte(fe, 0xff);
129 flexcop_set_tone(fe, SEC_TONE_ON);
131 flexcop_set_tone(fe, SEC_TONE_OFF);
138 static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd)
140 return flexcop_send_diseqc_msg(fe, cmd->msg_len, cmd->msg, 0);
143 static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd)
145 return flexcop_send_diseqc_msg(fe, 0, NULL, minicmd);
149 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio)
154 if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; }
155 else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; }
156 else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; }
157 else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; }
158 else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; }
159 else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; }
161 stv0299_writereg (fe, 0x13, aclk);
162 stv0299_writereg (fe, 0x14, bclk);
163 stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff);
164 stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff);
165 stv0299_writereg (fe, 0x21, (ratio ) & 0xf0);
170 static int samsung_tbmu24112_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
174 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
175 struct flexcop_device *fc = fe->dvb->priv;
177 div = params->frequency / 125;
179 buf[0] = (div >> 8) & 0x7f;
181 buf[2] = 0x84; /* 0xC4 */
184 if (params->frequency < 1500000) buf[3] |= 0x10;
186 if (fe->ops.i2c_gate_ctrl)
187 fe->ops.i2c_gate_ctrl(fe, 1);
188 if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1) {
194 static u8 samsung_tbmu24112_inittab[] = {
239 static struct stv0299_config samsung_tbmu24112_config = {
240 .demod_address = 0x68,
241 .inittab = samsung_tbmu24112_inittab,
245 .lock_output = STV0229_LOCKOUTPUT_LK,
246 .volt13_op0_op1 = STV0299_VOLT13_OP1,
248 .set_symbol_rate = samsung_tbmu24112_set_symbol_rate,
252 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
254 static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d };
255 static u8 mt352_reset [] = { 0x50, 0x80 };
256 static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
257 static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 };
258 static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
260 mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config));
262 mt352_write(fe, mt352_reset, sizeof(mt352_reset));
263 mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
265 mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
266 mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
271 static int samsung_tdtc9251dh0_calc_regs(struct dvb_frontend* fe, struct dvb_frontend_parameters *params, u8* pllbuf, int buf_len)
274 unsigned char bs = 0;
279 #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */
280 div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6;
282 if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09;
283 if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a;
284 if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08;
287 pllbuf[1] = div >> 8;
288 pllbuf[2] = div & 0xff;
295 static struct mt352_config samsung_tdtc9251dh0_config = {
296 .demod_address = 0x0f,
297 .demod_init = samsung_tdtc9251dh0_demod_init,
300 static int flexcop_fe_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name)
302 struct flexcop_device *fc = fe->dvb->priv;
303 return request_firmware(fw, name, fc->dev);
306 static int lgdt3303_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
308 struct flexcop_device *fc = fe->dvb->priv;
309 return lg_h06xf_pll_set(fe, &fc->i2c_adap, params);
312 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
313 .demod_address = 0x59,
314 .demod_chip = LGDT3303,
316 .clock_polarity_flip = 1,
319 static struct nxt200x_config samsung_tbmv_config = {
320 .demod_address = 0x0a,
323 static struct bcm3510_config air2pc_atsc_first_gen_config = {
324 .demod_address = 0x0f,
325 .request_firmware = flexcop_fe_request_firmware,
328 static int skystar23_samsung_tbdu18132_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters *params)
332 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) };
333 struct flexcop_device *fc = fe->dvb->priv;
335 div = (params->frequency + (125/2)) / 125;
337 buf[0] = (div >> 8) & 0x7f;
338 buf[1] = (div >> 0) & 0xff;
339 buf[2] = 0x84 | ((div >> 10) & 0x60);
342 if (params->frequency < 1550000)
345 if (fe->ops.i2c_gate_ctrl)
346 fe->ops.i2c_gate_ctrl(fe, 1);
347 if (i2c_transfer(&fc->i2c_adap, &msg, 1) != 1)
352 static struct mt312_config skystar23_samsung_tbdu18132_config = {
354 .demod_address = 0x0e,
357 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
358 struct dvb_frontend_parameters *fep)
360 struct flexcop_device *fc = fe->dvb->priv;
367 #define FREQ_OFFSET 36125
369 div = ((fep->frequency/1000 + FREQ_OFFSET ) * 10) / REF_FREQ; // 4 MHz = 4000 KHz
371 buf[0] = (u8)( div >> 8) & 0x7f;
372 buf[1] = (u8) div & 0xff;
374 /* F(osc) = N * Reference Freq. (62.5 kHz)
375 * byte 2 : 0 N14 N13 N12 N11 N10 N9 N8
376 * byte 3 : N7 N6 N5 N4 N3 N2 N1 N0
377 * byte 4 : 1 * * AGD R3 R2 R1 R0
378 * byte 5 : C1 * RE RTS BS4 BS3 BS2 BS1
379 * AGD = 1, R3 R2 R1 R0 = 0 1 0 1 => byte 4 = 1**10101 = 0x95 */
382 // Range(MHz) C1 * RE RTS BS4 BS3 BS2 BS1 Byte 5
383 // 47 - 153 0 * 0 0 0 0 0 1 0x01
384 // 153 - 430 0 * 0 0 0 0 1 0 0x02
385 // 430 - 822 0 * 0 0 1 0 0 0 0x08
386 // 822 - 862 1 * 0 0 1 0 0 0 0x88
388 if (fep->frequency <= 153000000) buf[3] = 0x01;
389 else if (fep->frequency <= 430000000) buf[3] = 0x02;
390 else if (fep->frequency <= 822000000) buf[3] = 0x08;
393 if (fe->ops.i2c_gate_ctrl)
394 fe->ops.i2c_gate_ctrl(fe, 1);
395 deb_tuner("tuner buffer for %d Hz: %x %x %x %x\n",fep->frequency, buf[0],buf[1],buf[2],buf[3]);
396 ret = fc->i2c_request(fc,FC_WRITE,FC_I2C_PORT_TUNER,0x61,buf[0],&buf[1],3);
397 deb_tuner("tuner write returned: %d\n",ret);
402 static u8 alps_tdee4_stv0297_inittab[] = {
495 static struct stv0297_config alps_tdee4_stv0297_config = {
496 .demod_address = 0x1c,
497 .inittab = alps_tdee4_stv0297_inittab,
499 // .pll_set = alps_tdee4_stv0297_pll_set,
502 /* try to figure out the frontend, each card/box can have on of the following list */
503 int flexcop_frontend_init(struct flexcop_device *fc)
505 struct dvb_frontend_ops *ops;
507 /* try the sky v2.6 (stv0299/Samsung tbmu24112(sl1935)) */
508 if ((fc->fe = dvb_attach(stv0299_attach, &samsung_tbmu24112_config, &fc->i2c_adap)) != NULL) {
511 ops->tuner_ops.set_params = samsung_tbmu24112_tuner_set_params;
513 ops->set_voltage = flexcop_set_voltage;
515 fc->fe_sleep = ops->sleep;
516 ops->sleep = flexcop_sleep;
518 fc->dev_type = FC_SKY;
519 info("found the stv0299 at i2c address: 0x%02x",samsung_tbmu24112_config.demod_address);
521 /* try the air dvb-t (mt352/Samsung tdtc9251dh0(??)) */
522 if ((fc->fe = dvb_attach(mt352_attach, &samsung_tdtc9251dh0_config, &fc->i2c_adap)) != NULL ) {
523 fc->dev_type = FC_AIR_DVB;
524 fc->fe->ops.tuner_ops.calc_regs = samsung_tdtc9251dh0_calc_regs;
525 info("found the mt352 at i2c address: 0x%02x",samsung_tdtc9251dh0_config.demod_address);
527 /* try the air atsc 2nd generation (nxt2002) */
528 if ((fc->fe = dvb_attach(nxt200x_attach, &samsung_tbmv_config, &fc->i2c_adap)) != NULL) {
529 fc->dev_type = FC_AIR_ATSC2;
530 dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL, &dvb_pll_samsung_tbmv);
531 info("found the nxt2002 at i2c address: 0x%02x",samsung_tbmv_config.demod_address);
533 /* try the air atsc 3nd generation (lgdt3303) */
534 if ((fc->fe = dvb_attach(lgdt330x_attach, &air2pc_atsc_hd5000_config, &fc->i2c_adap)) != NULL) {
535 fc->dev_type = FC_AIR_ATSC3;
536 fc->fe->ops.tuner_ops.set_params = lgdt3303_tuner_set_params;
537 info("found the lgdt3303 at i2c address: 0x%02x",air2pc_atsc_hd5000_config.demod_address);
539 /* try the air atsc 1nd generation (bcm3510)/panasonic ct10s */
540 if ((fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, &fc->i2c_adap)) != NULL) {
541 fc->dev_type = FC_AIR_ATSC1;
542 info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
544 /* try the cable dvb (stv0297) */
545 if ((fc->fe = dvb_attach(stv0297_attach, &alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
546 fc->dev_type = FC_CABLE;
547 fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
548 info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
550 /* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
551 if ((fc->fe = dvb_attach(vp310_mt312_attach, &skystar23_samsung_tbdu18132_config, &fc->i2c_adap)) != NULL) {
554 ops->tuner_ops.set_params = skystar23_samsung_tbdu18132_tuner_set_params;
556 ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd;
557 ops->diseqc_send_burst = flexcop_diseqc_send_burst;
558 ops->set_tone = flexcop_set_tone;
559 ops->set_voltage = flexcop_set_voltage;
561 fc->fe_sleep = ops->sleep;
562 ops->sleep = flexcop_sleep;
564 fc->dev_type = FC_SKY_OLD;
565 info("found the vp310 (aka mt312) at i2c address: 0x%02x",skystar23_samsung_tbdu18132_config.demod_address);
568 if (fc->fe == NULL) {
569 err("no frontend driver found for this B2C2/FlexCop adapter");
572 if (dvb_register_frontend(&fc->dvb_adapter, fc->fe)) {
573 err("frontend registration failed!");
574 dvb_frontend_detach(fc->fe);
579 fc->init_state |= FC_STATE_FE_INIT;
583 void flexcop_frontend_exit(struct flexcop_device *fc)
585 if (fc->init_state & FC_STATE_FE_INIT) {
586 dvb_unregister_frontend(fc->fe);
587 dvb_frontend_detach(fc->fe);
590 fc->init_state &= ~FC_STATE_FE_INIT;