2 * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
3 * Licensed under the GPL
6 #include "linux/kernel.h"
8 #include "linux/sched.h"
10 #include "linux/spinlock.h"
11 #include "linux/init.h"
12 #include "linux/ptrace.h"
13 #include "asm/semaphore.h"
14 #include "asm/pgtable.h"
15 #include "asm/pgalloc.h"
16 #include "asm/tlbflush.h"
17 #include "asm/a.out.h"
18 #include "asm/current.h"
20 #include "sysdep/sigcontext.h"
21 #include "user_util.h"
22 #include "kern_util.h"
24 #include "chan_kern.h"
25 #include "mconsole_kern.h"
28 #include "sysdep/sigcontext.h"
29 #include "sysdep/ptrace.h"
31 #ifdef CONFIG_MODE_SKAS
36 /* Note this is constrained to return 0, -EFAULT, -EACCESS, -ENOMEM by segv(). */
37 int handle_page_fault(unsigned long address, unsigned long ip,
38 int is_write, int is_user, int *code_out)
40 struct mm_struct *mm = current->mm;
41 struct vm_area_struct *vma;
48 *code_out = SEGV_MAPERR;
50 /* If the fault was during atomic operation, don't take the fault, just
55 down_read(&mm->mmap_sem);
56 vma = find_vma(mm, address);
59 else if(vma->vm_start <= address)
61 else if(!(vma->vm_flags & VM_GROWSDOWN))
63 else if(is_user && !ARCH_IS_STACKGROW(address))
65 else if(expand_stack(vma, address))
69 *code_out = SEGV_ACCERR;
70 if(is_write && !(vma->vm_flags & VM_WRITE))
73 /* Don't require VM_READ|VM_EXEC for write faults! */
74 if(!is_write && !(vma->vm_flags & (VM_READ | VM_EXEC)))
79 switch (handle_mm_fault(mm, vma, address, is_write)){
95 pgd = pgd_offset(mm, address);
96 pud = pud_offset(pgd, address);
97 pmd = pmd_offset(pud, address);
98 pte = pte_offset_kernel(pmd, address);
99 } while(!pte_present(*pte));
101 /* The below warning was added in place of
102 * pte_mkyoung(); if (is_write) pte_mkdirty();
103 * If it's triggered, we'd see normally a hang here (a clean pte is
104 * marked read-only to emulate the dirty bit).
105 * However, the generic code can mark a PTE writable but clean on a
106 * concurrent read fault, triggering this harmlessly. So comment it out.
109 WARN_ON(!pte_young(*pte) || (is_write && !pte_dirty(*pte)));
111 flush_tlb_page(vma, address);
113 up_read(&mm->mmap_sem);
118 * We ran out of memory, or some other thing happened to us that made
119 * us unable to handle the page fault gracefully.
122 if (is_init(current)) {
123 up_read(&mm->mmap_sem);
125 down_read(&mm->mmap_sem);
131 void segv_handler(int sig, union uml_pt_regs *regs)
133 struct faultinfo * fi = UPT_FAULTINFO(regs);
135 if(UPT_IS_USER(regs) && !SEGV_IS_FIXABLE(fi)){
136 bad_segv(*fi, UPT_IP(regs));
139 segv(*fi, UPT_IP(regs), UPT_IS_USER(regs), regs);
143 * We give a *copy* of the faultinfo in the regs to segv.
144 * This must be done, since nesting SEGVs could overwrite
145 * the info in the regs. A pointer to the info then would
148 unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc)
153 int is_write = FAULT_WRITE(fi);
154 unsigned long address = FAULT_ADDRESS(fi);
156 if(!is_user && (address >= start_vm) && (address < end_vm)){
157 flush_tlb_kernel_vm();
160 else if(current->mm == NULL)
161 panic("Segfault with no mm");
163 if (SEGV_IS_FIXABLE(&fi) || SEGV_MAYBE_FIXABLE(&fi))
164 err = handle_page_fault(address, ip, is_write, is_user, &si.si_code);
167 /* A thread accessed NULL, we get a fault, but CR2 is invalid.
168 * This code is used in __do_copy_from_user() of TT mode. */
172 catcher = current->thread.fault_catcher;
175 else if(catcher != NULL){
176 current->thread.fault_addr = (void *) address;
177 do_longjmp(catcher, 1);
179 else if(current->thread.fault_addr != NULL)
180 panic("fault_addr set but no fault catcher");
181 else if(!is_user && arch_fixup(ip, sc))
185 panic("Kernel mode fault at addr 0x%lx, ip 0x%lx",
188 if (err == -EACCES) {
189 si.si_signo = SIGBUS;
191 si.si_code = BUS_ADRERR;
192 si.si_addr = (void __user *)address;
193 current->thread.arch.faultinfo = fi;
194 force_sig_info(SIGBUS, &si, current);
195 } else if (err == -ENOMEM) {
196 printk("VM: killing process %s\n", current->comm);
199 BUG_ON(err != -EFAULT);
200 si.si_signo = SIGSEGV;
201 si.si_addr = (void __user *) address;
202 current->thread.arch.faultinfo = fi;
203 force_sig_info(SIGSEGV, &si, current);
208 void bad_segv(struct faultinfo fi, unsigned long ip)
212 si.si_signo = SIGSEGV;
213 si.si_code = SEGV_ACCERR;
214 si.si_addr = (void __user *) FAULT_ADDRESS(fi);
215 current->thread.arch.faultinfo = fi;
216 force_sig_info(SIGSEGV, &si, current);
219 void relay_signal(int sig, union uml_pt_regs *regs)
221 if(arch_handle_signal(sig, regs))
224 if(!UPT_IS_USER(regs)){
226 printk("Bus error - the /dev/shm or /tmp mount likely "
227 "just ran out of space\n");
228 panic("Kernel mode signal %d", sig);
231 current->thread.arch.faultinfo = *UPT_FAULTINFO(regs);
232 force_sig(sig, current);
235 void bus_handler(int sig, union uml_pt_regs *regs)
237 if(current->thread.fault_catcher != NULL)
238 do_longjmp(current->thread.fault_catcher, 1);
239 else relay_signal(sig, regs);
242 void winch(int sig, union uml_pt_regs *regs)
244 do_IRQ(WINCH_IRQ, regs);
247 const struct kern_handlers handlinfo_kern = {
248 .relay_signal = relay_signal,
250 .bus_handler = bus_handler,
251 .page_fault = segv_handler,
252 .sigio_handler = sigio_handler,
253 .timer_handler = timer_handler