2  * DS1286 Real Time Clock interface for Linux
 
   4  * Copyright (C) 1998, 1999, 2000 Ralf Baechle
 
   6  * Based on code written by Paul Gortmaker.
 
   8  * This driver allows use of the real time clock (built into nearly all
 
   9  * computers) from user space. It exports the /dev/rtc interface supporting
 
  10  * various ioctl() and also the /proc/rtc pseudo-file for status
 
  13  * The ioctls can be used to set the interrupt behaviour and generation rate
 
  14  * from the RTC via IRQ 8. Then the /dev/rtc interface can be used to make
 
  15  * use of these timer interrupts, be they interval or alarm based.
 
  17  * The /dev/rtc interface will block on reads until an interrupt has been
 
  18  * received. If a RTC interrupt has already happened, it will output an
 
  19  * unsigned long and then block. The output value contains the interrupt
 
  20  * status in the low byte and the number of interrupts since the last read
 
  21  * in the remaining high bytes. The /dev/rtc interface can also be used with
 
  24  * This program is free software; you can redistribute it and/or modify it
 
  25  * under the terms of the GNU General Public License as published by the
 
  26  * Free Software Foundation; either version 2 of the License, or (at your
 
  27  * option) any later version.
 
  29 #include <linux/ds1286.h>
 
  30 #include <linux/types.h>
 
  31 #include <linux/errno.h>
 
  32 #include <linux/miscdevice.h>
 
  33 #include <linux/slab.h>
 
  34 #include <linux/ioport.h>
 
  35 #include <linux/fcntl.h>
 
  36 #include <linux/init.h>
 
  37 #include <linux/poll.h>
 
  38 #include <linux/rtc.h>
 
  39 #include <linux/spinlock.h>
 
  40 #include <linux/bcd.h>
 
  41 #include <linux/proc_fs.h>
 
  43 #include <asm/uaccess.h>
 
  44 #include <asm/system.h>
 
  46 #define DS1286_VERSION          "1.0"
 
  49  *      We sponge a minor off of the misc major. No need slurping
 
  50  *      up another valuable major dev number for this. If you add
 
  51  *      an ioctl, make sure you don't conflict with SPARC's RTC
 
  55 static DECLARE_WAIT_QUEUE_HEAD(ds1286_wait);
 
  57 static ssize_t ds1286_read(struct file *file, char *buf,
 
  58                         size_t count, loff_t *ppos);
 
  60 static int ds1286_ioctl(struct inode *inode, struct file *file,
 
  61                         unsigned int cmd, unsigned long arg);
 
  63 static unsigned int ds1286_poll(struct file *file, poll_table *wait);
 
  65 static void ds1286_get_alm_time (struct rtc_time *alm_tm);
 
  66 static void ds1286_get_time(struct rtc_time *rtc_tm);
 
  67 static int ds1286_set_time(struct rtc_time *rtc_tm);
 
  69 static inline unsigned char ds1286_is_updating(void);
 
  71 static DEFINE_SPINLOCK(ds1286_lock);
 
  73 static int ds1286_read_proc(char *page, char **start, off_t off,
 
  74                             int count, int *eof, void *data);
 
  77  *      Bits in rtc_status. (7 bits of room for future expansion)
 
  80 #define RTC_IS_OPEN             0x01    /* means /dev/rtc is in use     */
 
  81 #define RTC_TIMER_ON            0x02    /* missed irq timer active      */
 
  83 static unsigned char ds1286_status;     /* bitmapped status byte.       */
 
  85 static unsigned char days_in_mo[] = {
 
  86         0, 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31
 
  90  *      Now all the various file operations that we export.
 
  93 static ssize_t ds1286_read(struct file *file, char *buf,
 
  94                            size_t count, loff_t *ppos)
 
  99 static int ds1286_ioctl(struct inode *inode, struct file *file,
 
 100                         unsigned int cmd, unsigned long arg)
 
 102         struct rtc_time wtime;
 
 105         case RTC_AIE_OFF:       /* Mask alarm int. enab. bit    */
 
 110                 if (!capable(CAP_SYS_TIME))
 
 113                 spin_lock_irqsave(&ds1286_lock, flags);
 
 114                 val = rtc_read(RTC_CMD);
 
 116                 rtc_write(val, RTC_CMD);
 
 117                 spin_unlock_irqrestore(&ds1286_lock, flags);
 
 121         case RTC_AIE_ON:        /* Allow alarm interrupts.      */
 
 126                 if (!capable(CAP_SYS_TIME))
 
 129                 spin_lock_irqsave(&ds1286_lock, flags);
 
 130                 val = rtc_read(RTC_CMD);
 
 132                 rtc_write(val, RTC_CMD);
 
 133                 spin_unlock_irqrestore(&ds1286_lock, flags);
 
 137         case RTC_WIE_OFF:       /* Mask watchdog int. enab. bit */
 
 142                 if (!capable(CAP_SYS_TIME))
 
 145                 spin_lock_irqsave(&ds1286_lock, flags);
 
 146                 val = rtc_read(RTC_CMD);
 
 148                 rtc_write(val, RTC_CMD);
 
 149                 spin_unlock_irqrestore(&ds1286_lock, flags);
 
 153         case RTC_WIE_ON:        /* Allow watchdog interrupts.   */
 
 158                 if (!capable(CAP_SYS_TIME))
 
 161                 spin_lock_irqsave(&ds1286_lock, flags);
 
 162                 val = rtc_read(RTC_CMD);
 
 164                 rtc_write(val, RTC_CMD);
 
 165                 spin_unlock_irqrestore(&ds1286_lock, flags);
 
 169         case RTC_ALM_READ:      /* Read the present alarm time */
 
 172                  * This returns a struct rtc_time. Reading >= 0xc0
 
 173                  * means "don't care" or "match all". Only the tm_hour,
 
 174                  * tm_min, and tm_sec values are filled in.
 
 177                 memset(&wtime, 0, sizeof(wtime));
 
 178                 ds1286_get_alm_time(&wtime);
 
 181         case RTC_ALM_SET:       /* Store a time into the alarm */
 
 184                  * This expects a struct rtc_time. Writing 0xff means
 
 185                  * "don't care" or "match all". Only the tm_hour,
 
 186                  * tm_min and tm_sec are used.
 
 188                 unsigned char hrs, min, sec;
 
 189                 struct rtc_time alm_tm;
 
 191                 if (!capable(CAP_SYS_TIME))
 
 194                 if (copy_from_user(&alm_tm, (struct rtc_time*)arg,
 
 195                                    sizeof(struct rtc_time)))
 
 198                 hrs = alm_tm.tm_hour;
 
 211                 spin_lock(&ds1286_lock);
 
 212                 rtc_write(hrs, RTC_HOURS_ALARM);
 
 213                 rtc_write(min, RTC_MINUTES_ALARM);
 
 214                 spin_unlock(&ds1286_lock);
 
 218         case RTC_RD_TIME:       /* Read the time/date from RTC  */
 
 220                 memset(&wtime, 0, sizeof(wtime));
 
 221                 ds1286_get_time(&wtime);
 
 224         case RTC_SET_TIME:      /* Set the RTC */
 
 226                 struct rtc_time rtc_tm;
 
 228                 if (!capable(CAP_SYS_TIME))
 
 231                 if (copy_from_user(&rtc_tm, (struct rtc_time*)arg,
 
 232                                    sizeof(struct rtc_time)))
 
 235                 return ds1286_set_time(&rtc_tm);
 
 240         return copy_to_user((void *)arg, &wtime, sizeof wtime) ? -EFAULT : 0;
 
 244  *      We enforce only one user at a time here with the open/close.
 
 245  *      Also clear the previous interrupt data on an open, and clean
 
 246  *      up things on a close.
 
 249 static int ds1286_open(struct inode *inode, struct file *file)
 
 251         spin_lock_irq(&ds1286_lock);
 
 253         if (ds1286_status & RTC_IS_OPEN)
 
 256         ds1286_status |= RTC_IS_OPEN;
 
 258         spin_unlock_irq(&ds1286_lock);
 
 262         spin_lock_irq(&ds1286_lock);
 
 266 static int ds1286_release(struct inode *inode, struct file *file)
 
 268         ds1286_status &= ~RTC_IS_OPEN;
 
 273 static unsigned int ds1286_poll(struct file *file, poll_table *wait)
 
 275         poll_wait(file, &ds1286_wait, wait);
 
 281  *      The various file operations we support.
 
 284 static const struct file_operations ds1286_fops = {
 
 288         .ioctl          = ds1286_ioctl,
 
 290         .release        = ds1286_release,
 
 293 static struct miscdevice ds1286_dev=
 
 297         .fops   = &ds1286_fops,
 
 300 static int __init ds1286_init(void)
 
 304         printk(KERN_INFO "DS1286 Real Time Clock Driver v%s\n", DS1286_VERSION);
 
 306         err = misc_register(&ds1286_dev);
 
 310         if (!create_proc_read_entry("driver/rtc", 0, 0, ds1286_read_proc, NULL)) {
 
 319         misc_deregister(&ds1286_dev);
 
 325 static void __exit ds1286_exit(void)
 
 327         remove_proc_entry("driver/rtc", NULL);
 
 328         misc_deregister(&ds1286_dev);
 
 331 static char *days[] = {
 
 332         "***", "Sun", "Mon", "Tue", "Wed", "Thu", "Fri", "Sat"
 
 336  *      Info exported via "/proc/rtc".
 
 338 static int ds1286_proc_output(char *buf)
 
 342         unsigned char hundredth, month, cmd, amode;
 
 346         ds1286_get_time(&tm);
 
 347         hundredth = rtc_read(RTC_HUNDREDTH_SECOND);
 
 348         BCD_TO_BIN(hundredth);
 
 351                      "rtc_time\t: %02d:%02d:%02d.%02d\n"
 
 352                      "rtc_date\t: %04d-%02d-%02d\n",
 
 353                      tm.tm_hour, tm.tm_min, tm.tm_sec, hundredth,
 
 354                      tm.tm_year + 1900, tm.tm_mon + 1, tm.tm_mday);
 
 357          * We implicitly assume 24hr mode here. Alarm values >= 0xc0 will
 
 358          * match any value for that particular field. Values that are
 
 359          * greater than a valid time, but less than 0xc0 shouldn't appear.
 
 361         ds1286_get_alm_time(&tm);
 
 362         p += sprintf(p, "alarm\t\t: %s ", days[tm.tm_wday]);
 
 363         if (tm.tm_hour <= 24)
 
 364                 p += sprintf(p, "%02d:", tm.tm_hour);
 
 366                 p += sprintf(p, "**:");
 
 369                 p += sprintf(p, "%02d\n", tm.tm_min);
 
 371                 p += sprintf(p, "**\n");
 
 373         month = rtc_read(RTC_MONTH);
 
 376                      "square_wave\t: %s\n",
 
 377                      (month & RTC_EOSC) ? "disabled" : "enabled",
 
 378                      (month & RTC_ESQW) ? "disabled" : "enabled");
 
 380         amode = ((rtc_read(RTC_MINUTES_ALARM) & 0x80) >> 5) |
 
 381                 ((rtc_read(RTC_HOURS_ALARM) & 0x80) >> 6) |
 
 382                 ((rtc_read(RTC_DAY_ALARM) & 0x80) >> 7);
 
 383         if (amode == 7)      s = "each minute";
 
 384         else if (amode == 3) s = "minutes match";
 
 385         else if (amode == 1) s = "hours and minutes match";
 
 386         else if (amode == 0) s = "days, hours and minutes match";
 
 388         p += sprintf(p, "alarm_mode\t: %s\n", s);
 
 390         cmd = rtc_read(RTC_CMD);
 
 392                      "alarm_enable\t: %s\n"
 
 395                      "wdog_alarm_mask\t: %s\n"
 
 396                      "interrupt_mode\t: %s\n"
 
 397                      "INTB_mode\t: %s_active\n"
 
 398                      "interrupt_pins\t: %s\n",
 
 399                      (cmd & RTC_TDF) ? "yes" : "no",
 
 400                      (cmd & RTC_WAF) ? "yes" : "no",
 
 401                      (cmd & RTC_TDM) ? "disabled" : "enabled",
 
 402                      (cmd & RTC_WAM) ? "disabled" : "enabled",
 
 403                      (cmd & RTC_PU_LVL) ? "pulse" : "level",
 
 404                      (cmd & RTC_IBH_LO) ? "low" : "high",
 
 405                      (cmd & RTC_IPSW) ? "unswapped" : "swapped");
 
 410 static int ds1286_read_proc(char *page, char **start, off_t off,
 
 411                          int count, int *eof, void *data)
 
 413         int len = ds1286_proc_output (page);
 
 414         if (len <= off+count) *eof = 1;
 
 426  * Returns true if a clock update is in progress
 
 428 static inline unsigned char ds1286_is_updating(void)
 
 430         return rtc_read(RTC_CMD) & RTC_TE;
 
 434 static void ds1286_get_time(struct rtc_time *rtc_tm)
 
 436         unsigned char save_control;
 
 438         unsigned long uip_watchdog = jiffies;
 
 441          * read RTC once any update in progress is done. The update
 
 442          * can take just over 2ms. We wait 10 to 20ms. There is no need to
 
 443          * to poll-wait (up to 1s - eeccch) for the falling edge of RTC_UIP.
 
 444          * If you need to know *exactly* when a second has started, enable
 
 445          * periodic update complete interrupts, (via ioctl) and then
 
 446          * immediately read /dev/rtc which will block until you get the IRQ.
 
 447          * Once the read clears, read the RTC time (again via ioctl). Easy.
 
 450         if (ds1286_is_updating() != 0)
 
 451                 while (jiffies - uip_watchdog < 2*HZ/100)
 
 455          * Only the values that we read from the RTC are set. We leave
 
 456          * tm_wday, tm_yday and tm_isdst untouched. Even though the
 
 457          * RTC has RTC_DAY_OF_WEEK, we ignore it, as it is only updated
 
 458          * by the RTC when initially set to a non-zero value.
 
 460         spin_lock_irqsave(&ds1286_lock, flags);
 
 461         save_control = rtc_read(RTC_CMD);
 
 462         rtc_write((save_control|RTC_TE), RTC_CMD);
 
 464         rtc_tm->tm_sec = rtc_read(RTC_SECONDS);
 
 465         rtc_tm->tm_min = rtc_read(RTC_MINUTES);
 
 466         rtc_tm->tm_hour = rtc_read(RTC_HOURS) & 0x3f;
 
 467         rtc_tm->tm_mday = rtc_read(RTC_DATE);
 
 468         rtc_tm->tm_mon = rtc_read(RTC_MONTH) & 0x1f;
 
 469         rtc_tm->tm_year = rtc_read(RTC_YEAR);
 
 471         rtc_write(save_control, RTC_CMD);
 
 472         spin_unlock_irqrestore(&ds1286_lock, flags);
 
 474         BCD_TO_BIN(rtc_tm->tm_sec);
 
 475         BCD_TO_BIN(rtc_tm->tm_min);
 
 476         BCD_TO_BIN(rtc_tm->tm_hour);
 
 477         BCD_TO_BIN(rtc_tm->tm_mday);
 
 478         BCD_TO_BIN(rtc_tm->tm_mon);
 
 479         BCD_TO_BIN(rtc_tm->tm_year);
 
 482          * Account for differences between how the RTC uses the values
 
 483          * and how they are defined in a struct rtc_time;
 
 485         if (rtc_tm->tm_year < 45)
 
 486                 rtc_tm->tm_year += 30;
 
 487         if ((rtc_tm->tm_year += 40) < 70)
 
 488                 rtc_tm->tm_year += 100;
 
 493 static int ds1286_set_time(struct rtc_time *rtc_tm)
 
 495         unsigned char mon, day, hrs, min, sec, leap_yr;
 
 496         unsigned char save_control;
 
 501         yrs = rtc_tm->tm_year + 1900;
 
 502         mon = rtc_tm->tm_mon + 1;   /* tm_mon starts at zero */
 
 503         day = rtc_tm->tm_mday;
 
 504         hrs = rtc_tm->tm_hour;
 
 505         min = rtc_tm->tm_min;
 
 506         sec = rtc_tm->tm_sec;
 
 511         leap_yr = ((!(yrs % 4) && (yrs % 100)) || !(yrs % 400));
 
 513         if ((mon > 12) || (day == 0))
 
 516         if (day > (days_in_mo[mon] + ((mon == 2) && leap_yr)))
 
 519         if ((hrs >= 24) || (min >= 60) || (sec >= 60))
 
 522         if ((yrs -= 1940) > 255)    /* They are unsigned */
 
 535         spin_lock_irqsave(&ds1286_lock, flags);
 
 536         save_control = rtc_read(RTC_CMD);
 
 537         rtc_write((save_control|RTC_TE), RTC_CMD);
 
 539         rtc_write(yrs, RTC_YEAR);
 
 540         rtc_write(mon, RTC_MONTH);
 
 541         rtc_write(day, RTC_DATE);
 
 542         rtc_write(hrs, RTC_HOURS);
 
 543         rtc_write(min, RTC_MINUTES);
 
 544         rtc_write(sec, RTC_SECONDS);
 
 545         rtc_write(0, RTC_HUNDREDTH_SECOND);
 
 547         rtc_write(save_control, RTC_CMD);
 
 548         spin_unlock_irqrestore(&ds1286_lock, flags);
 
 553 static void ds1286_get_alm_time(struct rtc_time *alm_tm)
 
 559          * Only the values that we read from the RTC are set. That
 
 560          * means only tm_wday, tm_hour, tm_min.
 
 562         spin_lock_irqsave(&ds1286_lock, flags);
 
 563         alm_tm->tm_min = rtc_read(RTC_MINUTES_ALARM) & 0x7f;
 
 564         alm_tm->tm_hour = rtc_read(RTC_HOURS_ALARM)  & 0x1f;
 
 565         alm_tm->tm_wday = rtc_read(RTC_DAY_ALARM)    & 0x07;
 
 566         cmd = rtc_read(RTC_CMD);
 
 567         spin_unlock_irqrestore(&ds1286_lock, flags);
 
 569         BCD_TO_BIN(alm_tm->tm_min);
 
 570         BCD_TO_BIN(alm_tm->tm_hour);
 
 574 module_init(ds1286_init);
 
 575 module_exit(ds1286_exit);
 
 577 MODULE_AUTHOR("Ralf Baechle");
 
 578 MODULE_LICENSE("GPL");
 
 579 MODULE_ALIAS_MISCDEV(RTC_MINOR);