Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
[linux-2.6] / arch / arm / mach-at91 / at91cap9_devices.c
1 /*
2  * arch/arm/mach-at91/at91cap9_devices.c
3  *
4  *  Copyright (C) 2007 Stelian Pop <stelian.pop@leadtechdesign.com>
5  *  Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com>
6  *  Copyright (C) 2007 Atmel Corporation.
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  *
13  */
14 #include <asm/mach/arch.h>
15 #include <asm/mach/map.h>
16 #include <asm/mach/irq.h>
17
18 #include <linux/dma-mapping.h>
19 #include <linux/platform_device.h>
20 #include <linux/i2c-gpio.h>
21
22 #include <video/atmel_lcdc.h>
23
24 #include <mach/board.h>
25 #include <mach/cpu.h>
26 #include <mach/gpio.h>
27 #include <mach/at91cap9.h>
28 #include <mach/at91cap9_matrix.h>
29 #include <mach/at91sam9_smc.h>
30
31 #include "generic.h"
32
33
34 /* --------------------------------------------------------------------
35  *  USB Host
36  * -------------------------------------------------------------------- */
37
38 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
39 static u64 ohci_dmamask = DMA_BIT_MASK(32);
40 static struct at91_usbh_data usbh_data;
41
42 static struct resource usbh_resources[] = {
43         [0] = {
44                 .start  = AT91CAP9_UHP_BASE,
45                 .end    = AT91CAP9_UHP_BASE + SZ_1M - 1,
46                 .flags  = IORESOURCE_MEM,
47         },
48         [1] = {
49                 .start  = AT91CAP9_ID_UHP,
50                 .end    = AT91CAP9_ID_UHP,
51                 .flags  = IORESOURCE_IRQ,
52         },
53 };
54
55 static struct platform_device at91_usbh_device = {
56         .name           = "at91_ohci",
57         .id             = -1,
58         .dev            = {
59                                 .dma_mask               = &ohci_dmamask,
60                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
61                                 .platform_data          = &usbh_data,
62         },
63         .resource       = usbh_resources,
64         .num_resources  = ARRAY_SIZE(usbh_resources),
65 };
66
67 void __init at91_add_device_usbh(struct at91_usbh_data *data)
68 {
69         int i;
70
71         if (!data)
72                 return;
73
74         if (cpu_is_at91cap9_revB())
75                 set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH);
76
77         /* Enable VBus control for UHP ports */
78         for (i = 0; i < data->ports; i++) {
79                 if (data->vbus_pin[i])
80                         at91_set_gpio_output(data->vbus_pin[i], 0);
81         }
82
83         usbh_data = *data;
84         platform_device_register(&at91_usbh_device);
85 }
86 #else
87 void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
88 #endif
89
90
91 /* --------------------------------------------------------------------
92  *  USB HS Device (Gadget)
93  * -------------------------------------------------------------------- */
94
95 #if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
96
97 static struct resource usba_udc_resources[] = {
98         [0] = {
99                 .start  = AT91CAP9_UDPHS_FIFO,
100                 .end    = AT91CAP9_UDPHS_FIFO + SZ_512K - 1,
101                 .flags  = IORESOURCE_MEM,
102         },
103         [1] = {
104                 .start  = AT91CAP9_BASE_UDPHS,
105                 .end    = AT91CAP9_BASE_UDPHS + SZ_1K - 1,
106                 .flags  = IORESOURCE_MEM,
107         },
108         [2] = {
109                 .start  = AT91CAP9_ID_UDPHS,
110                 .end    = AT91CAP9_ID_UDPHS,
111                 .flags  = IORESOURCE_IRQ,
112         },
113 };
114
115 #define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
116         [idx] = {                                               \
117                 .name           = nam,                          \
118                 .index          = idx,                          \
119                 .fifo_size      = maxpkt,                       \
120                 .nr_banks       = maxbk,                        \
121                 .can_dma        = dma,                          \
122                 .can_isoc       = isoc,                         \
123         }
124
125 static struct usba_ep_data usba_udc_ep[] = {
126         EP("ep0", 0,   64, 1, 0, 0),
127         EP("ep1", 1, 1024, 3, 1, 1),
128         EP("ep2", 2, 1024, 3, 1, 1),
129         EP("ep3", 3, 1024, 2, 1, 1),
130         EP("ep4", 4, 1024, 2, 1, 1),
131         EP("ep5", 5, 1024, 2, 1, 0),
132         EP("ep6", 6, 1024, 2, 1, 0),
133         EP("ep7", 7, 1024, 2, 0, 0),
134 };
135
136 #undef EP
137
138 /*
139  * pdata doesn't have room for any endpoints, so we need to
140  * append room for the ones we need right after it.
141  */
142 static struct {
143         struct usba_platform_data pdata;
144         struct usba_ep_data ep[8];
145 } usba_udc_data;
146
147 static struct platform_device at91_usba_udc_device = {
148         .name           = "atmel_usba_udc",
149         .id             = -1,
150         .dev            = {
151                                 .platform_data  = &usba_udc_data.pdata,
152         },
153         .resource       = usba_udc_resources,
154         .num_resources  = ARRAY_SIZE(usba_udc_resources),
155 };
156
157 void __init at91_add_device_usba(struct usba_platform_data *data)
158 {
159         if (cpu_is_at91cap9_revB()) {
160                 set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH);
161                 at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS |
162                                                   AT91_MATRIX_UDPHS_BYPASS_LOCK);
163         }
164         else
165                 at91_sys_write(AT91_MATRIX_UDPHS, AT91_MATRIX_SELECT_UDPHS);
166
167         /*
168          * Invalid pins are 0 on AT91, but the usba driver is shared
169          * with AVR32, which use negative values instead. Once/if
170          * gpio_is_valid() is ported to AT91, revisit this code.
171          */
172         usba_udc_data.pdata.vbus_pin = -EINVAL;
173         usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
174         memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
175
176         if (data && data->vbus_pin > 0) {
177                 at91_set_gpio_input(data->vbus_pin, 0);
178                 at91_set_deglitch(data->vbus_pin, 1);
179                 usba_udc_data.pdata.vbus_pin = data->vbus_pin;
180         }
181
182         /* Pullup pin is handled internally by USB device peripheral */
183
184         /* Clocks */
185         at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
186         at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
187
188         platform_device_register(&at91_usba_udc_device);
189 }
190 #else
191 void __init at91_add_device_usba(struct usba_platform_data *data) {}
192 #endif
193
194
195 /* --------------------------------------------------------------------
196  *  Ethernet
197  * -------------------------------------------------------------------- */
198
199 #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
200 static u64 eth_dmamask = DMA_BIT_MASK(32);
201 static struct at91_eth_data eth_data;
202
203 static struct resource eth_resources[] = {
204         [0] = {
205                 .start  = AT91CAP9_BASE_EMAC,
206                 .end    = AT91CAP9_BASE_EMAC + SZ_16K - 1,
207                 .flags  = IORESOURCE_MEM,
208         },
209         [1] = {
210                 .start  = AT91CAP9_ID_EMAC,
211                 .end    = AT91CAP9_ID_EMAC,
212                 .flags  = IORESOURCE_IRQ,
213         },
214 };
215
216 static struct platform_device at91cap9_eth_device = {
217         .name           = "macb",
218         .id             = -1,
219         .dev            = {
220                                 .dma_mask               = &eth_dmamask,
221                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
222                                 .platform_data          = &eth_data,
223         },
224         .resource       = eth_resources,
225         .num_resources  = ARRAY_SIZE(eth_resources),
226 };
227
228 void __init at91_add_device_eth(struct at91_eth_data *data)
229 {
230         if (!data)
231                 return;
232
233         if (data->phy_irq_pin) {
234                 at91_set_gpio_input(data->phy_irq_pin, 0);
235                 at91_set_deglitch(data->phy_irq_pin, 1);
236         }
237
238         /* Pins used for MII and RMII */
239         at91_set_A_periph(AT91_PIN_PB21, 0);    /* ETXCK_EREFCK */
240         at91_set_A_periph(AT91_PIN_PB22, 0);    /* ERXDV */
241         at91_set_A_periph(AT91_PIN_PB25, 0);    /* ERX0 */
242         at91_set_A_periph(AT91_PIN_PB26, 0);    /* ERX1 */
243         at91_set_A_periph(AT91_PIN_PB27, 0);    /* ERXER */
244         at91_set_A_periph(AT91_PIN_PB28, 0);    /* ETXEN */
245         at91_set_A_periph(AT91_PIN_PB23, 0);    /* ETX0 */
246         at91_set_A_periph(AT91_PIN_PB24, 0);    /* ETX1 */
247         at91_set_A_periph(AT91_PIN_PB30, 0);    /* EMDIO */
248         at91_set_A_periph(AT91_PIN_PB29, 0);    /* EMDC */
249
250         if (!data->is_rmii) {
251                 at91_set_B_periph(AT91_PIN_PC25, 0);    /* ECRS */
252                 at91_set_B_periph(AT91_PIN_PC26, 0);    /* ECOL */
253                 at91_set_B_periph(AT91_PIN_PC22, 0);    /* ERX2 */
254                 at91_set_B_periph(AT91_PIN_PC23, 0);    /* ERX3 */
255                 at91_set_B_periph(AT91_PIN_PC27, 0);    /* ERXCK */
256                 at91_set_B_periph(AT91_PIN_PC20, 0);    /* ETX2 */
257                 at91_set_B_periph(AT91_PIN_PC21, 0);    /* ETX3 */
258                 at91_set_B_periph(AT91_PIN_PC24, 0);    /* ETXER */
259         }
260
261         eth_data = *data;
262         platform_device_register(&at91cap9_eth_device);
263 }
264 #else
265 void __init at91_add_device_eth(struct at91_eth_data *data) {}
266 #endif
267
268
269 /* --------------------------------------------------------------------
270  *  MMC / SD
271  * -------------------------------------------------------------------- */
272
273 #if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
274 static u64 mmc_dmamask = DMA_BIT_MASK(32);
275 static struct at91_mmc_data mmc0_data, mmc1_data;
276
277 static struct resource mmc0_resources[] = {
278         [0] = {
279                 .start  = AT91CAP9_BASE_MCI0,
280                 .end    = AT91CAP9_BASE_MCI0 + SZ_16K - 1,
281                 .flags  = IORESOURCE_MEM,
282         },
283         [1] = {
284                 .start  = AT91CAP9_ID_MCI0,
285                 .end    = AT91CAP9_ID_MCI0,
286                 .flags  = IORESOURCE_IRQ,
287         },
288 };
289
290 static struct platform_device at91cap9_mmc0_device = {
291         .name           = "at91_mci",
292         .id             = 0,
293         .dev            = {
294                                 .dma_mask               = &mmc_dmamask,
295                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
296                                 .platform_data          = &mmc0_data,
297         },
298         .resource       = mmc0_resources,
299         .num_resources  = ARRAY_SIZE(mmc0_resources),
300 };
301
302 static struct resource mmc1_resources[] = {
303         [0] = {
304                 .start  = AT91CAP9_BASE_MCI1,
305                 .end    = AT91CAP9_BASE_MCI1 + SZ_16K - 1,
306                 .flags  = IORESOURCE_MEM,
307         },
308         [1] = {
309                 .start  = AT91CAP9_ID_MCI1,
310                 .end    = AT91CAP9_ID_MCI1,
311                 .flags  = IORESOURCE_IRQ,
312         },
313 };
314
315 static struct platform_device at91cap9_mmc1_device = {
316         .name           = "at91_mci",
317         .id             = 1,
318         .dev            = {
319                                 .dma_mask               = &mmc_dmamask,
320                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
321                                 .platform_data          = &mmc1_data,
322         },
323         .resource       = mmc1_resources,
324         .num_resources  = ARRAY_SIZE(mmc1_resources),
325 };
326
327 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
328 {
329         if (!data)
330                 return;
331
332         /* input/irq */
333         if (data->det_pin) {
334                 at91_set_gpio_input(data->det_pin, 1);
335                 at91_set_deglitch(data->det_pin, 1);
336         }
337         if (data->wp_pin)
338                 at91_set_gpio_input(data->wp_pin, 1);
339         if (data->vcc_pin)
340                 at91_set_gpio_output(data->vcc_pin, 0);
341
342         if (mmc_id == 0) {              /* MCI0 */
343                 /* CLK */
344                 at91_set_A_periph(AT91_PIN_PA2, 0);
345
346                 /* CMD */
347                 at91_set_A_periph(AT91_PIN_PA1, 1);
348
349                 /* DAT0, maybe DAT1..DAT3 */
350                 at91_set_A_periph(AT91_PIN_PA0, 1);
351                 if (data->wire4) {
352                         at91_set_A_periph(AT91_PIN_PA3, 1);
353                         at91_set_A_periph(AT91_PIN_PA4, 1);
354                         at91_set_A_periph(AT91_PIN_PA5, 1);
355                 }
356
357                 mmc0_data = *data;
358                 at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk");
359                 platform_device_register(&at91cap9_mmc0_device);
360         } else {                        /* MCI1 */
361                 /* CLK */
362                 at91_set_A_periph(AT91_PIN_PA16, 0);
363
364                 /* CMD */
365                 at91_set_A_periph(AT91_PIN_PA17, 1);
366
367                 /* DAT0, maybe DAT1..DAT3 */
368                 at91_set_A_periph(AT91_PIN_PA18, 1);
369                 if (data->wire4) {
370                         at91_set_A_periph(AT91_PIN_PA19, 1);
371                         at91_set_A_periph(AT91_PIN_PA20, 1);
372                         at91_set_A_periph(AT91_PIN_PA21, 1);
373                 }
374
375                 mmc1_data = *data;
376                 at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk");
377                 platform_device_register(&at91cap9_mmc1_device);
378         }
379 }
380 #else
381 void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
382 #endif
383
384
385 /* --------------------------------------------------------------------
386  *  NAND / SmartMedia
387  * -------------------------------------------------------------------- */
388
389 #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
390 static struct atmel_nand_data nand_data;
391
392 #define NAND_BASE       AT91_CHIPSELECT_3
393
394 static struct resource nand_resources[] = {
395         [0] = {
396                 .start  = NAND_BASE,
397                 .end    = NAND_BASE + SZ_256M - 1,
398                 .flags  = IORESOURCE_MEM,
399         },
400         [1] = {
401                 .start  = AT91_BASE_SYS + AT91_ECC,
402                 .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
403                 .flags  = IORESOURCE_MEM,
404         }
405 };
406
407 static struct platform_device at91cap9_nand_device = {
408         .name           = "atmel_nand",
409         .id             = -1,
410         .dev            = {
411                                 .platform_data  = &nand_data,
412         },
413         .resource       = nand_resources,
414         .num_resources  = ARRAY_SIZE(nand_resources),
415 };
416
417 void __init at91_add_device_nand(struct atmel_nand_data *data)
418 {
419         unsigned long csa;
420
421         if (!data)
422                 return;
423
424         csa = at91_sys_read(AT91_MATRIX_EBICSA);
425         at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
426
427         /* enable pin */
428         if (data->enable_pin)
429                 at91_set_gpio_output(data->enable_pin, 1);
430
431         /* ready/busy pin */
432         if (data->rdy_pin)
433                 at91_set_gpio_input(data->rdy_pin, 1);
434
435         /* card detect pin */
436         if (data->det_pin)
437                 at91_set_gpio_input(data->det_pin, 1);
438
439         nand_data = *data;
440         platform_device_register(&at91cap9_nand_device);
441 }
442 #else
443 void __init at91_add_device_nand(struct atmel_nand_data *data) {}
444 #endif
445
446
447 /* --------------------------------------------------------------------
448  *  TWI (i2c)
449  * -------------------------------------------------------------------- */
450
451 /*
452  * Prefer the GPIO code since the TWI controller isn't robust
453  * (gets overruns and underruns under load) and can only issue
454  * repeated STARTs in one scenario (the driver doesn't yet handle them).
455  */
456 #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
457
458 static struct i2c_gpio_platform_data pdata = {
459         .sda_pin                = AT91_PIN_PB4,
460         .sda_is_open_drain      = 1,
461         .scl_pin                = AT91_PIN_PB5,
462         .scl_is_open_drain      = 1,
463         .udelay                 = 2,            /* ~100 kHz */
464 };
465
466 static struct platform_device at91cap9_twi_device = {
467         .name                   = "i2c-gpio",
468         .id                     = -1,
469         .dev.platform_data      = &pdata,
470 };
471
472 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
473 {
474         at91_set_GPIO_periph(AT91_PIN_PB4, 1);          /* TWD (SDA) */
475         at91_set_multi_drive(AT91_PIN_PB4, 1);
476
477         at91_set_GPIO_periph(AT91_PIN_PB5, 1);          /* TWCK (SCL) */
478         at91_set_multi_drive(AT91_PIN_PB5, 1);
479
480         i2c_register_board_info(0, devices, nr_devices);
481         platform_device_register(&at91cap9_twi_device);
482 }
483
484 #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
485
486 static struct resource twi_resources[] = {
487         [0] = {
488                 .start  = AT91CAP9_BASE_TWI,
489                 .end    = AT91CAP9_BASE_TWI + SZ_16K - 1,
490                 .flags  = IORESOURCE_MEM,
491         },
492         [1] = {
493                 .start  = AT91CAP9_ID_TWI,
494                 .end    = AT91CAP9_ID_TWI,
495                 .flags  = IORESOURCE_IRQ,
496         },
497 };
498
499 static struct platform_device at91cap9_twi_device = {
500         .name           = "at91_i2c",
501         .id             = -1,
502         .resource       = twi_resources,
503         .num_resources  = ARRAY_SIZE(twi_resources),
504 };
505
506 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
507 {
508         /* pins used for TWI interface */
509         at91_set_B_periph(AT91_PIN_PB4, 0);             /* TWD */
510         at91_set_multi_drive(AT91_PIN_PB4, 1);
511
512         at91_set_B_periph(AT91_PIN_PB5, 0);             /* TWCK */
513         at91_set_multi_drive(AT91_PIN_PB5, 1);
514
515         i2c_register_board_info(0, devices, nr_devices);
516         platform_device_register(&at91cap9_twi_device);
517 }
518 #else
519 void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
520 #endif
521
522 /* --------------------------------------------------------------------
523  *  SPI
524  * -------------------------------------------------------------------- */
525
526 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
527 static u64 spi_dmamask = DMA_BIT_MASK(32);
528
529 static struct resource spi0_resources[] = {
530         [0] = {
531                 .start  = AT91CAP9_BASE_SPI0,
532                 .end    = AT91CAP9_BASE_SPI0 + SZ_16K - 1,
533                 .flags  = IORESOURCE_MEM,
534         },
535         [1] = {
536                 .start  = AT91CAP9_ID_SPI0,
537                 .end    = AT91CAP9_ID_SPI0,
538                 .flags  = IORESOURCE_IRQ,
539         },
540 };
541
542 static struct platform_device at91cap9_spi0_device = {
543         .name           = "atmel_spi",
544         .id             = 0,
545         .dev            = {
546                                 .dma_mask               = &spi_dmamask,
547                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
548         },
549         .resource       = spi0_resources,
550         .num_resources  = ARRAY_SIZE(spi0_resources),
551 };
552
553 static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PD0, AT91_PIN_PD1 };
554
555 static struct resource spi1_resources[] = {
556         [0] = {
557                 .start  = AT91CAP9_BASE_SPI1,
558                 .end    = AT91CAP9_BASE_SPI1 + SZ_16K - 1,
559                 .flags  = IORESOURCE_MEM,
560         },
561         [1] = {
562                 .start  = AT91CAP9_ID_SPI1,
563                 .end    = AT91CAP9_ID_SPI1,
564                 .flags  = IORESOURCE_IRQ,
565         },
566 };
567
568 static struct platform_device at91cap9_spi1_device = {
569         .name           = "atmel_spi",
570         .id             = 1,
571         .dev            = {
572                                 .dma_mask               = &spi_dmamask,
573                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
574         },
575         .resource       = spi1_resources,
576         .num_resources  = ARRAY_SIZE(spi1_resources),
577 };
578
579 static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
580
581 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
582 {
583         int i;
584         unsigned long cs_pin;
585         short enable_spi0 = 0;
586         short enable_spi1 = 0;
587
588         /* Choose SPI chip-selects */
589         for (i = 0; i < nr_devices; i++) {
590                 if (devices[i].controller_data)
591                         cs_pin = (unsigned long) devices[i].controller_data;
592                 else if (devices[i].bus_num == 0)
593                         cs_pin = spi0_standard_cs[devices[i].chip_select];
594                 else
595                         cs_pin = spi1_standard_cs[devices[i].chip_select];
596
597                 if (devices[i].bus_num == 0)
598                         enable_spi0 = 1;
599                 else
600                         enable_spi1 = 1;
601
602                 /* enable chip-select pin */
603                 at91_set_gpio_output(cs_pin, 1);
604
605                 /* pass chip-select pin to driver */
606                 devices[i].controller_data = (void *) cs_pin;
607         }
608
609         spi_register_board_info(devices, nr_devices);
610
611         /* Configure SPI bus(es) */
612         if (enable_spi0) {
613                 at91_set_B_periph(AT91_PIN_PA0, 0);     /* SPI0_MISO */
614                 at91_set_B_periph(AT91_PIN_PA1, 0);     /* SPI0_MOSI */
615                 at91_set_B_periph(AT91_PIN_PA2, 0);     /* SPI0_SPCK */
616
617                 at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk");
618                 platform_device_register(&at91cap9_spi0_device);
619         }
620         if (enable_spi1) {
621                 at91_set_A_periph(AT91_PIN_PB12, 0);    /* SPI1_MISO */
622                 at91_set_A_periph(AT91_PIN_PB13, 0);    /* SPI1_MOSI */
623                 at91_set_A_periph(AT91_PIN_PB14, 0);    /* SPI1_SPCK */
624
625                 at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk");
626                 platform_device_register(&at91cap9_spi1_device);
627         }
628 }
629 #else
630 void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
631 #endif
632
633
634 /* --------------------------------------------------------------------
635  *  Timer/Counter block
636  * -------------------------------------------------------------------- */
637
638 #ifdef CONFIG_ATMEL_TCLIB
639
640 static struct resource tcb_resources[] = {
641         [0] = {
642                 .start  = AT91CAP9_BASE_TCB0,
643                 .end    = AT91CAP9_BASE_TCB0 + SZ_16K - 1,
644                 .flags  = IORESOURCE_MEM,
645         },
646         [1] = {
647                 .start  = AT91CAP9_ID_TCB,
648                 .end    = AT91CAP9_ID_TCB,
649                 .flags  = IORESOURCE_IRQ,
650         },
651 };
652
653 static struct platform_device at91cap9_tcb_device = {
654         .name           = "atmel_tcb",
655         .id             = 0,
656         .resource       = tcb_resources,
657         .num_resources  = ARRAY_SIZE(tcb_resources),
658 };
659
660 static void __init at91_add_device_tc(void)
661 {
662         /* this chip has one clock and irq for all three TC channels */
663         at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk");
664         platform_device_register(&at91cap9_tcb_device);
665 }
666 #else
667 static void __init at91_add_device_tc(void) { }
668 #endif
669
670
671 /* --------------------------------------------------------------------
672  *  RTT
673  * -------------------------------------------------------------------- */
674
675 static struct resource rtt_resources[] = {
676         {
677                 .start  = AT91_BASE_SYS + AT91_RTT,
678                 .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
679                 .flags  = IORESOURCE_MEM,
680         }
681 };
682
683 static struct platform_device at91cap9_rtt_device = {
684         .name           = "at91_rtt",
685         .id             = 0,
686         .resource       = rtt_resources,
687         .num_resources  = ARRAY_SIZE(rtt_resources),
688 };
689
690 static void __init at91_add_device_rtt(void)
691 {
692         platform_device_register(&at91cap9_rtt_device);
693 }
694
695
696 /* --------------------------------------------------------------------
697  *  Watchdog
698  * -------------------------------------------------------------------- */
699
700 #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
701 static struct platform_device at91cap9_wdt_device = {
702         .name           = "at91_wdt",
703         .id             = -1,
704         .num_resources  = 0,
705 };
706
707 static void __init at91_add_device_watchdog(void)
708 {
709         platform_device_register(&at91cap9_wdt_device);
710 }
711 #else
712 static void __init at91_add_device_watchdog(void) {}
713 #endif
714
715
716 /* --------------------------------------------------------------------
717  *  PWM
718  * --------------------------------------------------------------------*/
719
720 #if defined(CONFIG_ATMEL_PWM)
721 static u32 pwm_mask;
722
723 static struct resource pwm_resources[] = {
724         [0] = {
725                 .start  = AT91CAP9_BASE_PWMC,
726                 .end    = AT91CAP9_BASE_PWMC + SZ_16K - 1,
727                 .flags  = IORESOURCE_MEM,
728         },
729         [1] = {
730                 .start  = AT91CAP9_ID_PWMC,
731                 .end    = AT91CAP9_ID_PWMC,
732                 .flags  = IORESOURCE_IRQ,
733         },
734 };
735
736 static struct platform_device at91cap9_pwm0_device = {
737         .name   = "atmel_pwm",
738         .id     = -1,
739         .dev    = {
740                 .platform_data          = &pwm_mask,
741         },
742         .resource       = pwm_resources,
743         .num_resources  = ARRAY_SIZE(pwm_resources),
744 };
745
746 void __init at91_add_device_pwm(u32 mask)
747 {
748         if (mask & (1 << AT91_PWM0))
749                 at91_set_A_periph(AT91_PIN_PB19, 1);    /* enable PWM0 */
750
751         if (mask & (1 << AT91_PWM1))
752                 at91_set_B_periph(AT91_PIN_PB8, 1);     /* enable PWM1 */
753
754         if (mask & (1 << AT91_PWM2))
755                 at91_set_B_periph(AT91_PIN_PC29, 1);    /* enable PWM2 */
756
757         if (mask & (1 << AT91_PWM3))
758                 at91_set_B_periph(AT91_PIN_PA11, 1);    /* enable PWM3 */
759
760         pwm_mask = mask;
761
762         platform_device_register(&at91cap9_pwm0_device);
763 }
764 #else
765 void __init at91_add_device_pwm(u32 mask) {}
766 #endif
767
768
769
770 /* --------------------------------------------------------------------
771  *  AC97
772  * -------------------------------------------------------------------- */
773
774 #if defined(CONFIG_SND_AT91_AC97) || defined(CONFIG_SND_AT91_AC97_MODULE)
775 static u64 ac97_dmamask = DMA_BIT_MASK(32);
776 static struct atmel_ac97_data ac97_data;
777
778 static struct resource ac97_resources[] = {
779         [0] = {
780                 .start  = AT91CAP9_BASE_AC97C,
781                 .end    = AT91CAP9_BASE_AC97C + SZ_16K - 1,
782                 .flags  = IORESOURCE_MEM,
783         },
784         [1] = {
785                 .start  = AT91CAP9_ID_AC97C,
786                 .end    = AT91CAP9_ID_AC97C,
787                 .flags  = IORESOURCE_IRQ,
788         },
789 };
790
791 static struct platform_device at91cap9_ac97_device = {
792         .name           = "ac97c",
793         .id             = 1,
794         .dev            = {
795                                 .dma_mask               = &ac97_dmamask,
796                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
797                                 .platform_data          = &ac97_data,
798         },
799         .resource       = ac97_resources,
800         .num_resources  = ARRAY_SIZE(ac97_resources),
801 };
802
803 void __init at91_add_device_ac97(struct atmel_ac97_data *data)
804 {
805         if (!data)
806                 return;
807
808         at91_set_A_periph(AT91_PIN_PA6, 0);     /* AC97FS */
809         at91_set_A_periph(AT91_PIN_PA7, 0);     /* AC97CK */
810         at91_set_A_periph(AT91_PIN_PA8, 0);     /* AC97TX */
811         at91_set_A_periph(AT91_PIN_PA9, 0);     /* AC97RX */
812
813         /* reset */
814         if (data->reset_pin)
815                 at91_set_gpio_output(data->reset_pin, 0);
816
817         ac97_data = *data;
818         platform_device_register(&at91cap9_ac97_device);
819 }
820 #else
821 void __init at91_add_device_ac97(struct atmel_ac97_data *data) {}
822 #endif
823
824
825 /* --------------------------------------------------------------------
826  *  LCD Controller
827  * -------------------------------------------------------------------- */
828
829 #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
830 static u64 lcdc_dmamask = DMA_BIT_MASK(32);
831 static struct atmel_lcdfb_info lcdc_data;
832
833 static struct resource lcdc_resources[] = {
834         [0] = {
835                 .start  = AT91CAP9_LCDC_BASE,
836                 .end    = AT91CAP9_LCDC_BASE + SZ_4K - 1,
837                 .flags  = IORESOURCE_MEM,
838         },
839         [1] = {
840                 .start  = AT91CAP9_ID_LCDC,
841                 .end    = AT91CAP9_ID_LCDC,
842                 .flags  = IORESOURCE_IRQ,
843         },
844 };
845
846 static struct platform_device at91_lcdc_device = {
847         .name           = "atmel_lcdfb",
848         .id             = 0,
849         .dev            = {
850                                 .dma_mask               = &lcdc_dmamask,
851                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
852                                 .platform_data          = &lcdc_data,
853         },
854         .resource       = lcdc_resources,
855         .num_resources  = ARRAY_SIZE(lcdc_resources),
856 };
857
858 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
859 {
860         if (!data)
861                 return;
862
863         if (cpu_is_at91cap9_revB())
864                 set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH);
865
866         at91_set_A_periph(AT91_PIN_PC1, 0);     /* LCDHSYNC */
867         at91_set_A_periph(AT91_PIN_PC2, 0);     /* LCDDOTCK */
868         at91_set_A_periph(AT91_PIN_PC3, 0);     /* LCDDEN */
869         at91_set_B_periph(AT91_PIN_PB9, 0);     /* LCDCC */
870         at91_set_A_periph(AT91_PIN_PC6, 0);     /* LCDD2 */
871         at91_set_A_periph(AT91_PIN_PC7, 0);     /* LCDD3 */
872         at91_set_A_periph(AT91_PIN_PC8, 0);     /* LCDD4 */
873         at91_set_A_periph(AT91_PIN_PC9, 0);     /* LCDD5 */
874         at91_set_A_periph(AT91_PIN_PC10, 0);    /* LCDD6 */
875         at91_set_A_periph(AT91_PIN_PC11, 0);    /* LCDD7 */
876         at91_set_A_periph(AT91_PIN_PC14, 0);    /* LCDD10 */
877         at91_set_A_periph(AT91_PIN_PC15, 0);    /* LCDD11 */
878         at91_set_A_periph(AT91_PIN_PC16, 0);    /* LCDD12 */
879         at91_set_A_periph(AT91_PIN_PC17, 0);    /* LCDD13 */
880         at91_set_A_periph(AT91_PIN_PC18, 0);    /* LCDD14 */
881         at91_set_A_periph(AT91_PIN_PC19, 0);    /* LCDD15 */
882         at91_set_A_periph(AT91_PIN_PC22, 0);    /* LCDD18 */
883         at91_set_A_periph(AT91_PIN_PC23, 0);    /* LCDD19 */
884         at91_set_A_periph(AT91_PIN_PC24, 0);    /* LCDD20 */
885         at91_set_A_periph(AT91_PIN_PC25, 0);    /* LCDD21 */
886         at91_set_A_periph(AT91_PIN_PC26, 0);    /* LCDD22 */
887         at91_set_A_periph(AT91_PIN_PC27, 0);    /* LCDD23 */
888
889         lcdc_data = *data;
890         platform_device_register(&at91_lcdc_device);
891 }
892 #else
893 void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
894 #endif
895
896
897 /* --------------------------------------------------------------------
898  *  SSC -- Synchronous Serial Controller
899  * -------------------------------------------------------------------- */
900
901 #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
902 static u64 ssc0_dmamask = DMA_BIT_MASK(32);
903
904 static struct resource ssc0_resources[] = {
905         [0] = {
906                 .start  = AT91CAP9_BASE_SSC0,
907                 .end    = AT91CAP9_BASE_SSC0 + SZ_16K - 1,
908                 .flags  = IORESOURCE_MEM,
909         },
910         [1] = {
911                 .start  = AT91CAP9_ID_SSC0,
912                 .end    = AT91CAP9_ID_SSC0,
913                 .flags  = IORESOURCE_IRQ,
914         },
915 };
916
917 static struct platform_device at91cap9_ssc0_device = {
918         .name   = "ssc",
919         .id     = 0,
920         .dev    = {
921                 .dma_mask               = &ssc0_dmamask,
922                 .coherent_dma_mask      = DMA_BIT_MASK(32),
923         },
924         .resource       = ssc0_resources,
925         .num_resources  = ARRAY_SIZE(ssc0_resources),
926 };
927
928 static inline void configure_ssc0_pins(unsigned pins)
929 {
930         if (pins & ATMEL_SSC_TF)
931                 at91_set_A_periph(AT91_PIN_PB0, 1);
932         if (pins & ATMEL_SSC_TK)
933                 at91_set_A_periph(AT91_PIN_PB1, 1);
934         if (pins & ATMEL_SSC_TD)
935                 at91_set_A_periph(AT91_PIN_PB2, 1);
936         if (pins & ATMEL_SSC_RD)
937                 at91_set_A_periph(AT91_PIN_PB3, 1);
938         if (pins & ATMEL_SSC_RK)
939                 at91_set_A_periph(AT91_PIN_PB4, 1);
940         if (pins & ATMEL_SSC_RF)
941                 at91_set_A_periph(AT91_PIN_PB5, 1);
942 }
943
944 static u64 ssc1_dmamask = DMA_BIT_MASK(32);
945
946 static struct resource ssc1_resources[] = {
947         [0] = {
948                 .start  = AT91CAP9_BASE_SSC1,
949                 .end    = AT91CAP9_BASE_SSC1 + SZ_16K - 1,
950                 .flags  = IORESOURCE_MEM,
951         },
952         [1] = {
953                 .start  = AT91CAP9_ID_SSC1,
954                 .end    = AT91CAP9_ID_SSC1,
955                 .flags  = IORESOURCE_IRQ,
956         },
957 };
958
959 static struct platform_device at91cap9_ssc1_device = {
960         .name   = "ssc",
961         .id     = 1,
962         .dev    = {
963                 .dma_mask               = &ssc1_dmamask,
964                 .coherent_dma_mask      = DMA_BIT_MASK(32),
965         },
966         .resource       = ssc1_resources,
967         .num_resources  = ARRAY_SIZE(ssc1_resources),
968 };
969
970 static inline void configure_ssc1_pins(unsigned pins)
971 {
972         if (pins & ATMEL_SSC_TF)
973                 at91_set_A_periph(AT91_PIN_PB6, 1);
974         if (pins & ATMEL_SSC_TK)
975                 at91_set_A_periph(AT91_PIN_PB7, 1);
976         if (pins & ATMEL_SSC_TD)
977                 at91_set_A_periph(AT91_PIN_PB8, 1);
978         if (pins & ATMEL_SSC_RD)
979                 at91_set_A_periph(AT91_PIN_PB9, 1);
980         if (pins & ATMEL_SSC_RK)
981                 at91_set_A_periph(AT91_PIN_PB10, 1);
982         if (pins & ATMEL_SSC_RF)
983                 at91_set_A_periph(AT91_PIN_PB11, 1);
984 }
985
986 /*
987  * SSC controllers are accessed through library code, instead of any
988  * kind of all-singing/all-dancing driver.  For example one could be
989  * used by a particular I2S audio codec's driver, while another one
990  * on the same system might be used by a custom data capture driver.
991  */
992 void __init at91_add_device_ssc(unsigned id, unsigned pins)
993 {
994         struct platform_device *pdev;
995
996         /*
997          * NOTE: caller is responsible for passing information matching
998          * "pins" to whatever will be using each particular controller.
999          */
1000         switch (id) {
1001         case AT91CAP9_ID_SSC0:
1002                 pdev = &at91cap9_ssc0_device;
1003                 configure_ssc0_pins(pins);
1004                 at91_clock_associate("ssc0_clk", &pdev->dev, "ssc");
1005                 break;
1006         case AT91CAP9_ID_SSC1:
1007                 pdev = &at91cap9_ssc1_device;
1008                 configure_ssc1_pins(pins);
1009                 at91_clock_associate("ssc1_clk", &pdev->dev, "ssc");
1010                 break;
1011         default:
1012                 return;
1013         }
1014
1015         platform_device_register(pdev);
1016 }
1017
1018 #else
1019 void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
1020 #endif
1021
1022
1023 /* --------------------------------------------------------------------
1024  *  UART
1025  * -------------------------------------------------------------------- */
1026
1027 #if defined(CONFIG_SERIAL_ATMEL)
1028 static struct resource dbgu_resources[] = {
1029         [0] = {
1030                 .start  = AT91_VA_BASE_SYS + AT91_DBGU,
1031                 .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
1032                 .flags  = IORESOURCE_MEM,
1033         },
1034         [1] = {
1035                 .start  = AT91_ID_SYS,
1036                 .end    = AT91_ID_SYS,
1037                 .flags  = IORESOURCE_IRQ,
1038         },
1039 };
1040
1041 static struct atmel_uart_data dbgu_data = {
1042         .use_dma_tx     = 0,
1043         .use_dma_rx     = 0,            /* DBGU not capable of receive DMA */
1044         .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
1045 };
1046
1047 static u64 dbgu_dmamask = DMA_BIT_MASK(32);
1048
1049 static struct platform_device at91cap9_dbgu_device = {
1050         .name           = "atmel_usart",
1051         .id             = 0,
1052         .dev            = {
1053                                 .dma_mask               = &dbgu_dmamask,
1054                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1055                                 .platform_data          = &dbgu_data,
1056         },
1057         .resource       = dbgu_resources,
1058         .num_resources  = ARRAY_SIZE(dbgu_resources),
1059 };
1060
1061 static inline void configure_dbgu_pins(void)
1062 {
1063         at91_set_A_periph(AT91_PIN_PC30, 0);            /* DRXD */
1064         at91_set_A_periph(AT91_PIN_PC31, 1);            /* DTXD */
1065 }
1066
1067 static struct resource uart0_resources[] = {
1068         [0] = {
1069                 .start  = AT91CAP9_BASE_US0,
1070                 .end    = AT91CAP9_BASE_US0 + SZ_16K - 1,
1071                 .flags  = IORESOURCE_MEM,
1072         },
1073         [1] = {
1074                 .start  = AT91CAP9_ID_US0,
1075                 .end    = AT91CAP9_ID_US0,
1076                 .flags  = IORESOURCE_IRQ,
1077         },
1078 };
1079
1080 static struct atmel_uart_data uart0_data = {
1081         .use_dma_tx     = 1,
1082         .use_dma_rx     = 1,
1083 };
1084
1085 static u64 uart0_dmamask = DMA_BIT_MASK(32);
1086
1087 static struct platform_device at91cap9_uart0_device = {
1088         .name           = "atmel_usart",
1089         .id             = 1,
1090         .dev            = {
1091                                 .dma_mask               = &uart0_dmamask,
1092                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1093                                 .platform_data          = &uart0_data,
1094         },
1095         .resource       = uart0_resources,
1096         .num_resources  = ARRAY_SIZE(uart0_resources),
1097 };
1098
1099 static inline void configure_usart0_pins(unsigned pins)
1100 {
1101         at91_set_A_periph(AT91_PIN_PA22, 1);            /* TXD0 */
1102         at91_set_A_periph(AT91_PIN_PA23, 0);            /* RXD0 */
1103
1104         if (pins & ATMEL_UART_RTS)
1105                 at91_set_A_periph(AT91_PIN_PA24, 0);    /* RTS0 */
1106         if (pins & ATMEL_UART_CTS)
1107                 at91_set_A_periph(AT91_PIN_PA25, 0);    /* CTS0 */
1108 }
1109
1110 static struct resource uart1_resources[] = {
1111         [0] = {
1112                 .start  = AT91CAP9_BASE_US1,
1113                 .end    = AT91CAP9_BASE_US1 + SZ_16K - 1,
1114                 .flags  = IORESOURCE_MEM,
1115         },
1116         [1] = {
1117                 .start  = AT91CAP9_ID_US1,
1118                 .end    = AT91CAP9_ID_US1,
1119                 .flags  = IORESOURCE_IRQ,
1120         },
1121 };
1122
1123 static struct atmel_uart_data uart1_data = {
1124         .use_dma_tx     = 1,
1125         .use_dma_rx     = 1,
1126 };
1127
1128 static u64 uart1_dmamask = DMA_BIT_MASK(32);
1129
1130 static struct platform_device at91cap9_uart1_device = {
1131         .name           = "atmel_usart",
1132         .id             = 2,
1133         .dev            = {
1134                                 .dma_mask               = &uart1_dmamask,
1135                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1136                                 .platform_data          = &uart1_data,
1137         },
1138         .resource       = uart1_resources,
1139         .num_resources  = ARRAY_SIZE(uart1_resources),
1140 };
1141
1142 static inline void configure_usart1_pins(unsigned pins)
1143 {
1144         at91_set_A_periph(AT91_PIN_PD0, 1);             /* TXD1 */
1145         at91_set_A_periph(AT91_PIN_PD1, 0);             /* RXD1 */
1146
1147         if (pins & ATMEL_UART_RTS)
1148                 at91_set_B_periph(AT91_PIN_PD7, 0);     /* RTS1 */
1149         if (pins & ATMEL_UART_CTS)
1150                 at91_set_B_periph(AT91_PIN_PD8, 0);     /* CTS1 */
1151 }
1152
1153 static struct resource uart2_resources[] = {
1154         [0] = {
1155                 .start  = AT91CAP9_BASE_US2,
1156                 .end    = AT91CAP9_BASE_US2 + SZ_16K - 1,
1157                 .flags  = IORESOURCE_MEM,
1158         },
1159         [1] = {
1160                 .start  = AT91CAP9_ID_US2,
1161                 .end    = AT91CAP9_ID_US2,
1162                 .flags  = IORESOURCE_IRQ,
1163         },
1164 };
1165
1166 static struct atmel_uart_data uart2_data = {
1167         .use_dma_tx     = 1,
1168         .use_dma_rx     = 1,
1169 };
1170
1171 static u64 uart2_dmamask = DMA_BIT_MASK(32);
1172
1173 static struct platform_device at91cap9_uart2_device = {
1174         .name           = "atmel_usart",
1175         .id             = 3,
1176         .dev            = {
1177                                 .dma_mask               = &uart2_dmamask,
1178                                 .coherent_dma_mask      = DMA_BIT_MASK(32),
1179                                 .platform_data          = &uart2_data,
1180         },
1181         .resource       = uart2_resources,
1182         .num_resources  = ARRAY_SIZE(uart2_resources),
1183 };
1184
1185 static inline void configure_usart2_pins(unsigned pins)
1186 {
1187         at91_set_A_periph(AT91_PIN_PD2, 1);             /* TXD2 */
1188         at91_set_A_periph(AT91_PIN_PD3, 0);             /* RXD2 */
1189
1190         if (pins & ATMEL_UART_RTS)
1191                 at91_set_B_periph(AT91_PIN_PD5, 0);     /* RTS2 */
1192         if (pins & ATMEL_UART_CTS)
1193                 at91_set_B_periph(AT91_PIN_PD6, 0);     /* CTS2 */
1194 }
1195
1196 static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
1197 struct platform_device *atmel_default_console_device;   /* the serial console device */
1198
1199 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
1200 {
1201         struct platform_device *pdev;
1202
1203         switch (id) {
1204                 case 0:         /* DBGU */
1205                         pdev = &at91cap9_dbgu_device;
1206                         configure_dbgu_pins();
1207                         at91_clock_associate("mck", &pdev->dev, "usart");
1208                         break;
1209                 case AT91CAP9_ID_US0:
1210                         pdev = &at91cap9_uart0_device;
1211                         configure_usart0_pins(pins);
1212                         at91_clock_associate("usart0_clk", &pdev->dev, "usart");
1213                         break;
1214                 case AT91CAP9_ID_US1:
1215                         pdev = &at91cap9_uart1_device;
1216                         configure_usart1_pins(pins);
1217                         at91_clock_associate("usart1_clk", &pdev->dev, "usart");
1218                         break;
1219                 case AT91CAP9_ID_US2:
1220                         pdev = &at91cap9_uart2_device;
1221                         configure_usart2_pins(pins);
1222                         at91_clock_associate("usart2_clk", &pdev->dev, "usart");
1223                         break;
1224                 default:
1225                         return;
1226         }
1227         pdev->id = portnr;              /* update to mapped ID */
1228
1229         if (portnr < ATMEL_MAX_UART)
1230                 at91_uarts[portnr] = pdev;
1231 }
1232
1233 void __init at91_set_serial_console(unsigned portnr)
1234 {
1235         if (portnr < ATMEL_MAX_UART)
1236                 atmel_default_console_device = at91_uarts[portnr];
1237 }
1238
1239 void __init at91_add_device_serial(void)
1240 {
1241         int i;
1242
1243         for (i = 0; i < ATMEL_MAX_UART; i++) {
1244                 if (at91_uarts[i])
1245                         platform_device_register(at91_uarts[i]);
1246         }
1247
1248         if (!atmel_default_console_device)
1249                 printk(KERN_INFO "AT91: No default serial console defined.\n");
1250 }
1251 #else
1252 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
1253 void __init at91_set_serial_console(unsigned portnr) {}
1254 void __init at91_add_device_serial(void) {}
1255 #endif
1256
1257
1258 /* -------------------------------------------------------------------- */
1259 /*
1260  * These devices are always present and don't need any board-specific
1261  * setup.
1262  */
1263 static int __init at91_add_standard_devices(void)
1264 {
1265         at91_add_device_rtt();
1266         at91_add_device_watchdog();
1267         at91_add_device_tc();
1268         return 0;
1269 }
1270
1271 arch_initcall(at91_add_standard_devices);