git.oblomov.eu Git - linux-2.6/blob - arch/sh/boards/snapgear/setup.c

   1 /*
   2  * linux/arch/sh/boards/snapgear/setup.c
   3  *
   4  * Copyright (C) 2002  David McCullough <davidm@snapgear.com>
   5  * Copyright (C) 2003  Paul Mundt <lethal@linux-sh.org>
   6  *
   7  * Based on files with the following comments:
   8  *
   9  *           Copyright (C) 2000  Kazumoto Kojima
  10  *
  11  *           Modified for 7751 Solution Engine by
  12  *           Ian da Silva and Jeremy Siegel, 2001.
  13  */
  14 #include <linux/init.h>
  15 #include <linux/irq.h>
  16 #include <linux/interrupt.h>
  17 #include <linux/timer.h>
  18 #include <linux/delay.h>
  19 #include <linux/module.h>
  20 #include <linux/sched.h>
  21 #include <asm/machvec.h>
  22 #include <asm/snapgear.h>
  23 #include <asm/irq.h>
  24 #include <asm/io.h>
  25 #include <asm/rtc.h>
  26 #include <asm/cpu/timer.h>
  27
  28 extern void secureedge5410_rtc_init(void);
  29 extern void pcibios_init(void);
  30
  31 /****************************************************************************/
  32 /*
  33  * EraseConfig handling functions
  34  */
  35
  36 static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id)
  37 {
  38         volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000;
  39
  40         printk("SnapGear: erase switch interrupt!\n");
  41
  42         return IRQ_HANDLED;
  43 }
  44
  45 static int __init eraseconfig_init(void)
  46 {
  47         printk("SnapGear: EraseConfig init\n");
  48         /* Setup "EraseConfig" switch on external IRQ 0 */
  49         if (request_irq(IRL0_IRQ, eraseconfig_interrupt, IRQF_DISABLED,
  50                                 "Erase Config", NULL))
  51                 printk("SnapGear: failed to register IRQ%d for Reset witch\n",
  52                                 IRL0_IRQ);
  53         else
  54                 printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
  55                                 IRL0_IRQ);
  56         return(0);
  57 }
  58
  59 module_init(eraseconfig_init);
  60
  61 /****************************************************************************/
  62 /*
  63  * Initialize IRQ setting
  64  *
  65  * IRL0 = erase switch
  66  * IRL1 = eth0
  67  * IRL2 = eth1
  68  * IRL3 = crypto
  69  */
  70
  71 static void __init init_snapgear_IRQ(void)
  72 {
  73         printk("Setup SnapGear IRQ/IPR ...\n");
  74         /* enable individual interrupt mode for externals */
  75         plat_irq_setup_pins(IRQ_MODE_IRQ);
  76 }
  77
  78 /*
  79  * Initialize the board
  80  */
  81 static void __init snapgear_setup(char **cmdline_p)
  82 {
  83         board_time_init = secureedge5410_rtc_init;
  84 }
  85
  86 /*
  87  * The Machine Vector
  88  */
  89 static struct sh_machine_vector mv_snapgear __initmv = {
  90         .mv_name                = "SnapGear SecureEdge5410",
  91         .mv_setup               = snapgear_setup,
  92         .mv_nr_irqs             = 72,
  93
  94         .mv_inb                 = snapgear_inb,
  95         .mv_inw                 = snapgear_inw,
  96         .mv_inl                 = snapgear_inl,
  97         .mv_outb                = snapgear_outb,
  98         .mv_outw                = snapgear_outw,
  99         .mv_outl                = snapgear_outl,
 100
 101         .mv_inb_p               = snapgear_inb_p,
 102         .mv_inw_p               = snapgear_inw,
 103         .mv_inl_p               = snapgear_inl,
 104         .mv_outb_p              = snapgear_outb_p,
 105         .mv_outw_p              = snapgear_outw,
 106         .mv_outl_p              = snapgear_outl,
 107
 108         .mv_init_irq            = init_snapgear_IRQ,
 109 };