git.oblomov.eu Git - linux-2.6/blob - drivers/scsi/hptiop.h

   1 /*
   2  * HighPoint RR3xxx controller driver for Linux
   3  * Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation; version 2 of the License.
   8  *
   9  * This program is distributed in the hope that it will be useful,
  10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  12  * GNU General Public License for more details.
  13  *
  14  * Please report bugs/comments/suggestions to linux@highpoint-tech.com
  15  *
  16  * For more information, visit http://www.highpoint-tech.com
  17  */
  18 #ifndef _HPTIOP_H_
  19 #define _HPTIOP_H_
  20
  21 struct hpt_iopmu
  22 {
  23         __le32 resrved0[4];
  24         __le32 inbound_msgaddr0;
  25         __le32 inbound_msgaddr1;
  26         __le32 outbound_msgaddr0;
  27         __le32 outbound_msgaddr1;
  28         __le32 inbound_doorbell;
  29         __le32 inbound_intstatus;
  30         __le32 inbound_intmask;
  31         __le32 outbound_doorbell;
  32         __le32 outbound_intstatus;
  33         __le32 outbound_intmask;
  34         __le32 reserved1[2];
  35         __le32 inbound_queue;
  36         __le32 outbound_queue;
  37 };
  38
  39 #define IOPMU_QUEUE_EMPTY            0xffffffff
  40 #define IOPMU_QUEUE_MASK_HOST_BITS   0xf0000000
  41 #define IOPMU_QUEUE_ADDR_HOST_BIT    0x80000000
  42 #define IOPMU_QUEUE_REQUEST_SIZE_BIT    0x40000000
  43 #define IOPMU_QUEUE_REQUEST_RESULT_BIT   0x40000000
  44
  45 #define IOPMU_OUTBOUND_INT_MSG0      1
  46 #define IOPMU_OUTBOUND_INT_MSG1      2
  47 #define IOPMU_OUTBOUND_INT_DOORBELL  4
  48 #define IOPMU_OUTBOUND_INT_POSTQUEUE 8
  49 #define IOPMU_OUTBOUND_INT_PCI       0x10
  50
  51 #define IOPMU_INBOUND_INT_MSG0       1
  52 #define IOPMU_INBOUND_INT_MSG1       2
  53 #define IOPMU_INBOUND_INT_DOORBELL   4
  54 #define IOPMU_INBOUND_INT_ERROR      8
  55 #define IOPMU_INBOUND_INT_POSTQUEUE  0x10
  56
  57 enum hpt_iopmu_message {
  58         /* host-to-iop messages */
  59         IOPMU_INBOUND_MSG0_NOP = 0,
  60         IOPMU_INBOUND_MSG0_RESET,
  61         IOPMU_INBOUND_MSG0_FLUSH,
  62         IOPMU_INBOUND_MSG0_SHUTDOWN,
  63         IOPMU_INBOUND_MSG0_STOP_BACKGROUND_TASK,
  64         IOPMU_INBOUND_MSG0_START_BACKGROUND_TASK,
  65         IOPMU_INBOUND_MSG0_MAX = 0xff,
  66         /* iop-to-host messages */
  67         IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_0 = 0x100,
  68         IOPMU_OUTBOUND_MSG0_REGISTER_DEVICE_MAX = 0x1ff,
  69         IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_0 = 0x200,
  70         IOPMU_OUTBOUND_MSG0_UNREGISTER_DEVICE_MAX = 0x2ff,
  71         IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_0 = 0x300,
  72         IOPMU_OUTBOUND_MSG0_REVALIDATE_DEVICE_MAX = 0x3ff,
  73 };
  74
  75 struct hpt_iop_request_header
  76 {
  77         __le32 size;
  78         __le32 type;
  79         __le32 flags;
  80         __le32 result;
  81         __le32 context; /* host context */
  82         __le32 context_hi32;
  83 };
  84
  85 #define IOP_REQUEST_FLAG_SYNC_REQUEST 1
  86 #define IOP_REQUEST_FLAG_BIST_REQUEST 2
  87 #define IOP_REQUEST_FLAG_REMAPPED     4
  88 #define IOP_REQUEST_FLAG_OUTPUT_CONTEXT 8
  89
  90 enum hpt_iop_request_type {
  91         IOP_REQUEST_TYPE_GET_CONFIG = 0,
  92         IOP_REQUEST_TYPE_SET_CONFIG,
  93         IOP_REQUEST_TYPE_BLOCK_COMMAND,
  94         IOP_REQUEST_TYPE_SCSI_COMMAND,
  95         IOP_REQUEST_TYPE_IOCTL_COMMAND,
  96         IOP_REQUEST_TYPE_MAX
  97 };
  98
  99 enum hpt_iop_result_type {
 100         IOP_RESULT_PENDING = 0,
 101         IOP_RESULT_SUCCESS,
 102         IOP_RESULT_FAIL,
 103         IOP_RESULT_BUSY,
 104         IOP_RESULT_RESET,
 105         IOP_RESULT_INVALID_REQUEST,
 106         IOP_RESULT_BAD_TARGET,
 107         IOP_RESULT_MODE_SENSE_CHECK_CONDITION,
 108 };
 109
 110 struct hpt_iop_request_get_config
 111 {
 112         struct hpt_iop_request_header header;
 113         __le32 interface_version;
 114         __le32 firmware_version;
 115         __le32 max_requests;
 116         __le32 request_size;
 117         __le32 max_sg_count;
 118         __le32 data_transfer_length;
 119         __le32 alignment_mask;
 120         __le32 max_devices;
 121         __le32 sdram_size;
 122 };
 123
 124 struct hpt_iop_request_set_config
 125 {
 126         struct hpt_iop_request_header header;
 127         __le32 iop_id;
 128         __le16 vbus_id;
 129         __le16 max_host_request_size;
 130         __le32 reserve[6];
 131 };
 132
 133 struct hpt_iopsg
 134 {
 135         __le32 size;
 136         __le32 eot; /* non-zero: end of table */
 137         __le64 pci_address;
 138 };
 139
 140 struct hpt_iop_request_block_command
 141 {
 142         struct hpt_iop_request_header header;
 143         u8     channel;
 144         u8     target;
 145         u8     lun;
 146         u8     pad1;
 147         __le16 command; /* IOP_BLOCK_COMMAND_{READ,WRITE} */
 148         __le16 sectors;
 149         __le64 lba;
 150         struct hpt_iopsg sg_list[1];
 151 };
 152
 153 #define IOP_BLOCK_COMMAND_READ     1
 154 #define IOP_BLOCK_COMMAND_WRITE    2
 155 #define IOP_BLOCK_COMMAND_VERIFY   3
 156 #define IOP_BLOCK_COMMAND_FLUSH    4
 157 #define IOP_BLOCK_COMMAND_SHUTDOWN 5
 158
 159 struct hpt_iop_request_scsi_command
 160 {
 161         struct hpt_iop_request_header header;
 162         u8     channel;
 163         u8     target;
 164         u8     lun;
 165         u8     pad1;
 166         u8     cdb[16];
 167         __le32 dataxfer_length;
 168         struct hpt_iopsg sg_list[1];
 169 };
 170
 171 struct hpt_iop_request_ioctl_command
 172 {
 173         struct hpt_iop_request_header header;
 174         __le32 ioctl_code;
 175         __le32 inbuf_size;
 176         __le32 outbuf_size;
 177         __le32 bytes_returned;
 178         u8     buf[1];
 179         /* out data should be put at buf[(inbuf_size+3)&~3] */
 180 };
 181
 182 #define HPTIOP_MAX_REQUESTS  256u
 183
 184 struct hptiop_request {
 185         struct hptiop_request * next;
 186         void *                  req_virt;
 187         u32                     req_shifted_phy;
 188         struct scsi_cmnd *      scp;
 189         int                     index;
 190 };
 191
 192 struct hpt_scsi_pointer {
 193         int mapped;
 194         int sgcnt;
 195         dma_addr_t dma_handle;
 196 };
 197
 198 #define HPT_SCP(scp) ((struct hpt_scsi_pointer *)&(scp)->SCp)
 199
 200 struct hptiop_hba {
 201         struct hpt_iopmu __iomem * iop;
 202         struct Scsi_Host * host;
 203         struct pci_dev * pcidev;
 204
 205         /* IOP config info */
 206         u32     interface_version;
 207         u32     firmware_version;
 208         u32     sdram_size;
 209         u32     max_devices;
 210         u32     max_requests;
 211         u32     max_request_size;
 212         u32     max_sg_descriptors;
 213
 214         u32     req_size; /* host-allocated request buffer size */
 215
 216         int     iopintf_v2: 1;
 217         int     initialized: 1;
 218         int     msg_done: 1;
 219
 220         struct hptiop_request * req_list;
 221         struct hptiop_request reqs[HPTIOP_MAX_REQUESTS];
 222
 223         /* used to free allocated dma area */
 224         void *      dma_coherent;
 225         dma_addr_t  dma_coherent_handle;
 226
 227         atomic_t    reset_count;
 228         atomic_t    resetting;
 229
 230         wait_queue_head_t reset_wq;
 231         wait_queue_head_t ioctl_wq;
 232 };
 233
 234 struct hpt_ioctl_k
 235 {
 236         struct hptiop_hba * hba;
 237         u32    ioctl_code;
 238         u32    inbuf_size;
 239         u32    outbuf_size;
 240         void * inbuf;
 241         void * outbuf;
 242         u32  * bytes_returned;
 243         void (*done)(struct hpt_ioctl_k *);
 244         int    result; /* HPT_IOCTL_RESULT_ */
 245 };
 246
 247 #define HPT_IOCTL_RESULT_OK         0
 248 #define HPT_IOCTL_RESULT_FAILED     (-1)
 249
 250 #if 0
 251 #define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0)
 252 #else
 253 #define dprintk(fmt, args...)
 254 #endif
 255
 256 #endif