git.oblomov.eu Git - linux-2.6/blob - drivers/net/saa9730.c

   1 /*
   2  * Carsten Langgaard, carstenl@mips.com
   3  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
   4  *
   5  * ########################################################################
   6  *
   7  *  This program is free software; you can distribute it and/or modify it
   8  *  under the terms of the GNU General Public License (Version 2) as
   9  *  published by the Free Software Foundation.
  10  *
  11  *  This program is distributed in the hope it will be useful, but WITHOUT
  12  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  13  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  14  *  for more details.
  15  *
  16  *  You should have received a copy of the GNU General Public License along
  17  *  with this program; if not, write to the Free Software Foundation, Inc.,
  18  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  19  *
  20  * ########################################################################
  21  *
  22  * SAA9730 ethernet driver.
  23  *
  24  * Changes:
  25  * Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API (pci_driver).
  26  *                                          Conversion to spinlocks.
  27  *                                          Error handling fixes.
  28  *
  29  */
  30
  31 #include <linux/init.h>
  32 #include <linux/netdevice.h>
  33 #include <linux/delay.h>
  34 #include <linux/etherdevice.h>
  35 #include <linux/module.h>
  36 #include <linux/skbuff.h>
  37 #include <linux/pci.h>
  38 #include <linux/spinlock.h>
  39
  40 #include <asm/addrspace.h>
  41 #include <asm/mips-boards/prom.h>
  42
  43 #include "saa9730.h"
  44
  45 #ifdef LAN_SAA9730_DEBUG
  46 int lan_saa9730_debug = LAN_SAA9730_DEBUG;
  47 #else
  48 int lan_saa9730_debug;
  49 #endif
  50
  51 #define DRV_MODULE_NAME "saa9730"
  52
  53 static struct pci_device_id saa9730_pci_tbl[] = {
  54         { PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370,
  55           PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
  56         { 0, }
  57 };
  58
  59 MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
  60
  61 /* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
  62 static unsigned int pci_irq_line;
  63
  64 #define INL(a)     inl((unsigned long)a)
  65 #define OUTL(x,a)  outl(x,(unsigned long)a)
  66
  67 static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
  68 {
  69         OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
  70              &lp->evm_saa9730_regs->InterruptBlock1);
  71         OUTL(INL(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
  72              &lp->evm_saa9730_regs->InterruptStatus1);
  73         OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
  74              EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
  75 }
  76 static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
  77 {
  78         OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
  79              &lp->evm_saa9730_regs->InterruptBlock1);
  80         OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
  81              &lp->evm_saa9730_regs->InterruptEnable1);
  82 }
  83
  84 static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
  85 {
  86         OUTL(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
  87 }
  88
  89 static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
  90 {
  91         OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
  92              &lp->evm_saa9730_regs->InterruptBlock1);
  93 }
  94
  95 static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
  96 {
  97         OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
  98              &lp->evm_saa9730_regs->InterruptBlock1);
  99 }
 100
 101 static void show_saa9730_regs(struct lan_saa9730_private *lp)
 102 {
 103         int i, j;
 104         printk("TxmBufferA = %x\n", lp->TxmBuffer[0][0]);
 105         printk("TxmBufferB = %x\n", lp->TxmBuffer[1][0]);
 106         printk("RcvBufferA = %x\n", lp->RcvBuffer[0][0]);
 107         printk("RcvBufferB = %x\n", lp->RcvBuffer[1][0]);
 108         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 109                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 110                         printk("TxmBuffer[%d][%d] = %x\n", i, j,
 111                                le32_to_cpu(*(unsigned int *)
 112                                            lp->TxmBuffer[i][j]));
 113                 }
 114         }
 115         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 116                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 117                         printk("RcvBuffer[%d][%d] = %x\n", i, j,
 118                                le32_to_cpu(*(unsigned int *)
 119                                            lp->RcvBuffer[i][j]));
 120                 }
 121         }
 122         printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
 123                INL(&lp->evm_saa9730_regs->InterruptBlock1));
 124         printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
 125                INL(&lp->evm_saa9730_regs->InterruptStatus1));
 126         printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
 127                INL(&lp->evm_saa9730_regs->InterruptEnable1));
 128         printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
 129                INL(&lp->lan_saa9730_regs->Ok2Use));
 130         printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
 131         printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
 132         printk("lp->PendingTxmBufferIndex = %x\n",
 133                lp->PendingTxmBufferIndex);
 134         printk("lp->PendingTxmPacketIndex = %x\n",
 135                lp->PendingTxmPacketIndex);
 136         printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
 137                INL(&lp->lan_saa9730_regs->LanDmaCtl));
 138         printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
 139                INL(&lp->lan_saa9730_regs->DmaStatus));
 140         printk("lp->lan_saa9730_regs->CamCtl = %x\n",
 141                INL(&lp->lan_saa9730_regs->CamCtl));
 142         printk("lp->lan_saa9730_regs->TxCtl = %x\n",
 143                INL(&lp->lan_saa9730_regs->TxCtl));
 144         printk("lp->lan_saa9730_regs->TxStatus = %x\n",
 145                INL(&lp->lan_saa9730_regs->TxStatus));
 146         printk("lp->lan_saa9730_regs->RxCtl = %x\n",
 147                INL(&lp->lan_saa9730_regs->RxCtl));
 148         printk("lp->lan_saa9730_regs->RxStatus = %x\n",
 149                INL(&lp->lan_saa9730_regs->RxStatus));
 150         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
 151                 OUTL(i, &lp->lan_saa9730_regs->CamAddress);
 152                 printk("lp->lan_saa9730_regs->CamData = %x\n",
 153                        INL(&lp->lan_saa9730_regs->CamData));
 154         }
 155         printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets);
 156         printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors);
 157         printk("lp->stats.tx_aborted_errors = %lx\n",
 158                lp->stats.tx_aborted_errors);
 159         printk("lp->stats.tx_window_errors = %lx\n",
 160                lp->stats.tx_window_errors);
 161         printk("lp->stats.tx_carrier_errors = %lx\n",
 162                lp->stats.tx_carrier_errors);
 163         printk("lp->stats.tx_fifo_errors = %lx\n",
 164                lp->stats.tx_fifo_errors);
 165         printk("lp->stats.tx_heartbeat_errors = %lx\n",
 166                lp->stats.tx_heartbeat_errors);
 167         printk("lp->stats.collisions = %lx\n", lp->stats.collisions);
 168
 169         printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets);
 170         printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors);
 171         printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped);
 172         printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors);
 173         printk("lp->stats.rx_frame_errors = %lx\n",
 174                lp->stats.rx_frame_errors);
 175         printk("lp->stats.rx_fifo_errors = %lx\n",
 176                lp->stats.rx_fifo_errors);
 177         printk("lp->stats.rx_length_errors = %lx\n",
 178                lp->stats.rx_length_errors);
 179
 180         printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
 181                INL(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
 182         printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
 183                INL(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
 184         printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
 185                INL(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
 186         printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
 187                INL(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
 188         printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
 189                INL(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
 190         printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
 191                INL(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
 192 }
 193
 194 static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
 195 {
 196         int i, j;
 197
 198         /* Init RX buffers */
 199         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 200                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 201                         *(unsigned int *) lp->RcvBuffer[i][j] =
 202                             cpu_to_le32(RXSF_READY <<
 203                                         RX_STAT_CTL_OWNER_SHF);
 204                 }
 205         }
 206
 207         /* Init TX buffers */
 208         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 209                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 210                         *(unsigned int *) lp->TxmBuffer[i][j] =
 211                             cpu_to_le32(TXSF_EMPTY <<
 212                                         TX_STAT_CTL_OWNER_SHF);
 213                 }
 214         }
 215 }
 216
 217 static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp)
 218 {
 219         unsigned int mem_size;
 220         void *Pa;
 221         unsigned int i, j, RcvBufferSize, TxmBufferSize;
 222         unsigned int buffer_start;
 223
 224         /*
 225          * Allocate all RX and TX packets in one chunk.
 226          * The Rx and Tx packets must be PACKET_SIZE aligned.
 227          */
 228         mem_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
 229                     LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
 230             LAN_SAA9730_PACKET_SIZE;
 231         buffer_start =
 232             (unsigned int) kmalloc(mem_size, GFP_DMA | GFP_KERNEL);
 233
 234         if (!buffer_start)
 235                 return -ENOMEM;
 236
 237         /*
 238          * Set DMA buffer to kseg1 (uncached).
 239          * Make sure to flush before using it uncached.
 240          */
 241         Pa = (void *) KSEG1ADDR((buffer_start + LAN_SAA9730_PACKET_SIZE) &
 242                                 ~(LAN_SAA9730_PACKET_SIZE - 1));
 243         dma_cache_wback_inv((unsigned long) Pa, mem_size);
 244
 245         /* Initialize buffer space */
 246         RcvBufferSize = LAN_SAA9730_PACKET_SIZE;
 247         TxmBufferSize = LAN_SAA9730_PACKET_SIZE;
 248         lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
 249         lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
 250
 251         /* Init RX buffers */
 252         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 253                 for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
 254                         *(unsigned int *) Pa =
 255                             cpu_to_le32(RXSF_READY <<
 256                                         RX_STAT_CTL_OWNER_SHF);
 257                         lp->RcvBuffer[i][j] = (unsigned int) Pa;
 258                         Pa += RcvBufferSize;
 259                 }
 260         }
 261
 262         /* Init TX buffers */
 263         for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
 264                 for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
 265                         *(unsigned int *) Pa =
 266                             cpu_to_le32(TXSF_EMPTY <<
 267                                         TX_STAT_CTL_OWNER_SHF);
 268                         lp->TxmBuffer[i][j] = (unsigned int) Pa;
 269                         Pa += TxmBufferSize;
 270                 }
 271         }
 272
 273         /*
 274          * Set rx buffer A and rx buffer B to point to the first two buffer
 275          * spaces.
 276          */
 277         OUTL(PHYSADDR(lp->RcvBuffer[0][0]),
 278              &lp->lan_saa9730_regs->RxBuffA);
 279         OUTL(PHYSADDR(lp->RcvBuffer[1][0]),
 280              &lp->lan_saa9730_regs->RxBuffB);
 281
 282         /* Initialize Buffer Index */
 283         lp->NextRcvPacketIndex = 0;
 284         lp->NextRcvToUseIsA = 1;
 285
 286         /* Set current buffer index & next availble packet index */
 287         lp->NextTxmPacketIndex = 0;
 288         lp->NextTxmBufferIndex = 0;
 289         lp->PendingTxmPacketIndex = 0;
 290         lp->PendingTxmBufferIndex = 0;
 291
 292         /*
 293          * Set txm_buf_a and txm_buf_b to point to the first two buffer
 294          * space
 295          */
 296         OUTL(PHYSADDR(lp->TxmBuffer[0][0]),
 297              &lp->lan_saa9730_regs->TxBuffA);
 298         OUTL(PHYSADDR(lp->TxmBuffer[1][0]),
 299              &lp->lan_saa9730_regs->TxBuffB);
 300
 301         /* Set packet number */
 302         OUTL((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
 303              (lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
 304              (lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
 305              (lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
 306              &lp->lan_saa9730_regs->PacketCount);
 307
 308         return 0;
 309 }
 310
 311 static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
 312 {
 313         unsigned int i;
 314         unsigned char *NetworkAddress;
 315
 316         NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
 317
 318         for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
 319                 /* First set address to where data is written */
 320                 OUTL(i, &lp->lan_saa9730_regs->CamAddress);
 321                 OUTL((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
 322                      | (NetworkAddress[2] << 8) | NetworkAddress[3],
 323                      &lp->lan_saa9730_regs->CamData);
 324                 NetworkAddress += 4;
 325         }
 326         return 0;
 327 }
 328
 329 static int lan_saa9730_cam_init(struct net_device *dev)
 330 {
 331         struct lan_saa9730_private *lp =
 332             (struct lan_saa9730_private *) dev->priv;
 333         unsigned int i;
 334
 335         /* Copy MAC-address into all entries. */
 336         for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
 337                 memcpy((unsigned char *) lp->PhysicalAddress[i],
 338                        (unsigned char *) dev->dev_addr, 6);
 339         }
 340
 341         return 0;
 342 }
 343
 344 static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
 345 {
 346         int i, l;
 347
 348         /* Check link status, spin here till station is not busy. */
 349         i = 0;
 350         while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
 351                 i++;
 352                 if (i > 100) {
 353                         printk("Error: lan_saa9730_mii_init: timeout\n");
 354                         return -1;
 355                 }
 356                 mdelay(1);      /* wait 1 ms. */
 357         }
 358
 359         /* Now set the control and address register. */
 360         OUTL(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
 361              &lp->lan_saa9730_regs->StationMgmtCtl);
 362
 363         /* check link status, spin here till station is not busy */
 364         i = 0;
 365         while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
 366                 i++;
 367                 if (i > 100) {
 368                         printk("Error: lan_saa9730_mii_init: timeout\n");
 369                         return -1;
 370                 }
 371                 mdelay(1);      /* wait 1 ms. */
 372         }
 373
 374         /* Wait for 1 ms. */
 375         mdelay(1);
 376
 377         /* Check the link status. */
 378         if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
 379             PHY_STATUS_LINK_UP) {
 380                 /* Link is up. */
 381                 return 0;
 382         } else {
 383                 /* Link is down, reset the PHY first. */
 384
 385                 /* set PHY address = 'CONTROL' */
 386                 OUTL(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
 387                      &lp->lan_saa9730_regs->StationMgmtCtl);
 388
 389                 /* Wait for 1 ms. */
 390                 mdelay(1);
 391
 392                 /* set 'CONTROL' = force reset and renegotiate */
 393                 OUTL(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
 394                      PHY_CONTROL_RESTART_AUTO_NEG,
 395                      &lp->lan_saa9730_regs->StationMgmtData);
 396
 397                 /* Wait for 50 ms. */
 398                 mdelay(50);
 399
 400                 /* set 'BUSY' to start operation */
 401                 OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
 402                      PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
 403
 404                 /* await completion */
 405                 i = 0;
 406                 while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
 407                        MD_CA_BUSY) {
 408                         i++;
 409                         if (i > 100) {
 410                                 printk
 411                                     ("Error: lan_saa9730_mii_init: timeout\n");
 412                                 return -1;
 413                         }
 414                         mdelay(1);      /* wait 1 ms. */
 415                 }
 416
 417                 /* Wait for 1 ms. */
 418                 mdelay(1);
 419
 420                 for (l = 0; l < 2; l++) {
 421                         /* set PHY address = 'STATUS' */
 422                         OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
 423                              PHY_STATUS,
 424                              &lp->lan_saa9730_regs->StationMgmtCtl);
 425
 426                         /* await completion */
 427                         i = 0;
 428                         while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
 429                                MD_CA_BUSY) {
 430                                 i++;
 431                                 if (i > 100) {
 432                                         printk
 433                                             ("Error: lan_saa9730_mii_init: timeout\n");
 434                                         return -1;
 435                                 }
 436                                 mdelay(1);      /* wait 1 ms. */
 437                         }
 438
 439                         /* wait for 3 sec. */
 440                         mdelay(3000);
 441
 442                         /* check the link status */
 443                         if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
 444                             PHY_STATUS_LINK_UP) {
 445                                 /* link is up */
 446                                 break;
 447                         }
 448                 }
 449         }
 450
 451         return 0;
 452 }
 453
 454 static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
 455 {
 456         /* Initialize DMA control register. */
 457         OUTL((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
 458              (LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
 459              (LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
 460              | DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
 461              DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
 462              &lp->lan_saa9730_regs->LanDmaCtl);
 463
 464         /* Initial MAC control register. */
 465         OUTL((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
 466              &lp->lan_saa9730_regs->MacCtl);
 467
 468         /* Initialize CAM control register. */
 469         OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
 470              &lp->lan_saa9730_regs->CamCtl);
 471
 472         /*
 473          * Initialize CAM enable register, only turn on first entry, should
 474          * contain own addr.
 475          */
 476         OUTL(0x0001, &lp->lan_saa9730_regs->CamEnable);
 477
 478         /* Initialize Tx control register */
 479         OUTL(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
 480
 481         /* Initialize Rcv control register */
 482         OUTL(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
 483
 484         /* Reset DMA engine */
 485         OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
 486
 487         return 0;
 488 }
 489
 490 static int lan_saa9730_stop(struct lan_saa9730_private *lp)
 491 {
 492         int i;
 493
 494         /* Stop DMA first */
 495         OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) &
 496              ~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
 497              &lp->lan_saa9730_regs->LanDmaCtl);
 498
 499         /* Set the SW Reset bits in DMA and MAC control registers */
 500         OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
 501         OUTL(INL(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
 502              &lp->lan_saa9730_regs->MacCtl);
 503
 504         /*
 505          * Wait for MAC reset to have finished. The reset bit is auto cleared
 506          * when the reset is done.
 507          */
 508         i = 0;
 509         while (INL(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
 510                 i++;
 511                 if (i > 100) {
 512                         printk
 513                             ("Error: lan_sa9730_stop: MAC reset timeout\n");
 514                         return -1;
 515                 }
 516                 mdelay(1);      /* wait 1 ms. */
 517         }
 518
 519         return 0;
 520 }
 521
 522 static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
 523 {
 524         /* Stop lan controller. */
 525         lan_saa9730_stop(lp);
 526
 527         OUTL(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
 528              &lp->lan_saa9730_regs->Timeout);
 529
 530         return 0;
 531 }
 532
 533 static int lan_saa9730_start(struct lan_saa9730_private *lp)
 534 {
 535         lan_saa9730_buffer_init(lp);
 536
 537         /* Initialize Rx Buffer Index */
 538         lp->NextRcvPacketIndex = 0;
 539         lp->NextRcvToUseIsA = 1;
 540
 541         /* Set current buffer index & next availble packet index */
 542         lp->NextTxmPacketIndex = 0;
 543         lp->NextTxmBufferIndex = 0;
 544         lp->PendingTxmPacketIndex = 0;
 545         lp->PendingTxmBufferIndex = 0;
 546
 547         OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
 548              DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
 549
 550         /* For Tx, turn on MAC then DMA */
 551         OUTL(INL(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
 552              &lp->lan_saa9730_regs->TxCtl);
 553
 554         /* For Rx, turn on DMA then MAC */
 555         OUTL(INL(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
 556              &lp->lan_saa9730_regs->RxCtl);
 557
 558         /* Set Ok2Use to let hardware owns the buffers */
 559         OUTL(OK2USE_RX_A | OK2USE_RX_B | OK2USE_TX_A | OK2USE_TX_B,
 560              &lp->lan_saa9730_regs->Ok2Use);
 561
 562         return 0;
 563 }
 564
 565 static int lan_saa9730_restart(struct lan_saa9730_private *lp)
 566 {
 567         lan_saa9730_stop(lp);
 568         lan_saa9730_start(lp);
 569
 570         return 0;
 571 }
 572
 573 static int lan_saa9730_tx(struct net_device *dev)
 574 {
 575         struct lan_saa9730_private *lp =
 576             (struct lan_saa9730_private *) dev->priv;
 577         unsigned int *pPacket;
 578         unsigned int tx_status;
 579
 580         if (lan_saa9730_debug > 5)
 581                 printk("lan_saa9730_tx interrupt\n");
 582
 583         /* Clear interrupt. */
 584         OUTL(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
 585
 586         while (1) {
 587                 pPacket =
 588                     (unsigned int *) lp->TxmBuffer[lp->
 589                                                    PendingTxmBufferIndex]
 590                     [lp->PendingTxmPacketIndex];
 591
 592                 /* Get status of first packet transmitted. */
 593                 tx_status = le32_to_cpu(*pPacket);
 594
 595                 /* Check ownership. */
 596                 if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
 597                     (TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
 598
 599                 /* Check for error. */
 600                 if (tx_status & TX_STAT_CTL_ERROR_MSK) {
 601                         if (lan_saa9730_debug > 1)
 602                                 printk("lan_saa9730_tx: tx error = %x\n",
 603                                        tx_status);
 604
 605                         lp->stats.tx_errors++;
 606                         if (tx_status &
 607                             (TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
 608                                     lp->stats.tx_aborted_errors++;
 609                         if (tx_status &
 610                             (TX_STATUS_LATE_COLL <<
 611                              TX_STAT_CTL_STATUS_SHF)) lp->stats.
 612              tx_window_errors++;
 613                         if (tx_status &
 614                             (TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
 615                                     lp->stats.tx_carrier_errors++;
 616                         if (tx_status &
 617                             (TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
 618                                     lp->stats.tx_fifo_errors++;
 619                         if (tx_status &
 620                             (TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
 621                                     lp->stats.tx_heartbeat_errors++;
 622
 623                         lp->stats.collisions +=
 624                             tx_status & TX_STATUS_TX_COLL_MSK;
 625                 }
 626
 627                 /* Free buffer. */
 628                 *pPacket =
 629                     cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
 630
 631                 /* Update pending index pointer. */
 632                 lp->PendingTxmPacketIndex++;
 633                 if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
 634                         lp->PendingTxmPacketIndex = 0;
 635                         lp->PendingTxmBufferIndex ^= 1;
 636                 }
 637         }
 638
 639         /* Make sure A and B are available to hardware. */
 640         OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
 641
 642         if (netif_queue_stopped(dev)) {
 643                 /* The tx buffer is no longer full. */
 644                 netif_wake_queue(dev);
 645         }
 646
 647         return 0;
 648 }
 649
 650 static int lan_saa9730_rx(struct net_device *dev)
 651 {
 652         struct lan_saa9730_private *lp =
 653             (struct lan_saa9730_private *) dev->priv;
 654         int len = 0;
 655         struct sk_buff *skb = 0;
 656         unsigned int rx_status;
 657         int BufferIndex;
 658         int PacketIndex;
 659         unsigned int *pPacket;
 660         unsigned char *pData;
 661
 662         if (lan_saa9730_debug > 5)
 663                 printk("lan_saa9730_rx interrupt\n");
 664
 665         /* Clear receive interrupts. */
 666         OUTL(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
 667              DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
 668
 669         /* Address next packet */
 670         if (lp->NextRcvToUseIsA)
 671                 BufferIndex = 0;
 672         else
 673                 BufferIndex = 1;
 674         PacketIndex = lp->NextRcvPacketIndex;
 675         pPacket = (unsigned int *) lp->RcvBuffer[BufferIndex][PacketIndex];
 676         rx_status = le32_to_cpu(*pPacket);
 677
 678         /* Process each packet. */
 679         while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
 680                (RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
 681                 /* Check the rx status. */
 682                 if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
 683                         /* Received packet is good. */
 684                         len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
 685                             RX_STAT_CTL_LENGTH_SHF;
 686
 687                         pData = (unsigned char *) pPacket;
 688                         pData += 4;
 689                         skb = dev_alloc_skb(len + 2);
 690                         if (skb == 0) {
 691                                 printk
 692                                     ("%s: Memory squeeze, deferring packet.\n",
 693                                      dev->name);
 694                                 lp->stats.rx_dropped++;
 695                         } else {
 696                                 lp->stats.rx_bytes += len;
 697                                 lp->stats.rx_packets++;
 698                                 skb->dev = dev;
 699                                 skb_reserve(skb, 2);    /* 16 byte align */
 700                                 skb_put(skb, len);      /* make room */
 701                                 eth_copy_and_sum(skb,
 702                                                  (unsigned char *) pData,
 703                                                  len, 0);
 704                                 skb->protocol = eth_type_trans(skb, dev);
 705                                 netif_rx(skb);
 706                                 dev->last_rx = jiffies;
 707                         }
 708                 } else {
 709                         /* We got an error packet. */
 710                         if (lan_saa9730_debug > 2)
 711                                 printk
 712                                     ("lan_saa9730_rx: We got an error packet = %x\n",
 713                                      rx_status);
 714
 715                         lp->stats.rx_errors++;
 716                         if (rx_status &
 717                             (RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
 718                                     lp->stats.rx_crc_errors++;
 719                         if (rx_status &
 720                             (RX_STATUS_ALIGN_ERR <<
 721                              RX_STAT_CTL_STATUS_SHF)) lp->stats.
 722              rx_frame_errors++;
 723                         if (rx_status &
 724                             (RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
 725                                     lp->stats.rx_fifo_errors++;
 726                         if (rx_status &
 727                             (RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
 728                                     lp->stats.rx_length_errors++;
 729                 }
 730
 731                 /* Indicate we have processed the buffer. */
 732                 *pPacket =
 733                     cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
 734
 735                 /* Go to next packet in sequence. */
 736                 lp->NextRcvPacketIndex++;
 737                 if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
 738                         lp->NextRcvPacketIndex = 0;
 739                         if (BufferIndex) {
 740                                 lp->NextRcvToUseIsA = 1;
 741                         } else {
 742                                 lp->NextRcvToUseIsA = 0;
 743                         }
 744                 }
 745                 OUTL(OK2USE_RX_A | OK2USE_RX_B,
 746                      &lp->lan_saa9730_regs->Ok2Use);
 747
 748                 /* Address next packet */
 749                 if (lp->NextRcvToUseIsA)
 750                         BufferIndex = 0;
 751                 else
 752                         BufferIndex = 1;
 753                 PacketIndex = lp->NextRcvPacketIndex;
 754                 pPacket =
 755                     (unsigned int *) lp->
 756                     RcvBuffer[BufferIndex][PacketIndex];
 757                 rx_status = le32_to_cpu(*pPacket);
 758         }
 759
 760         /* Make sure A and B are available to hardware. */
 761         OUTL(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
 762
 763         return 0;
 764 }
 765
 766 static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id,
 767                                   struct pt_regs *regs)
 768 {
 769         struct net_device *dev = (struct net_device *) dev_id;
 770         struct lan_saa9730_private *lp =
 771             (struct lan_saa9730_private *) dev->priv;
 772
 773         if (lan_saa9730_debug > 5)
 774                 printk("lan_saa9730_interrupt\n");
 775
 776         /* Disable the EVM LAN interrupt. */
 777         evm_saa9730_block_lan_int(lp);
 778
 779         /* Clear the EVM LAN interrupt. */
 780         evm_saa9730_clear_lan_int(lp);
 781
 782         /* Service pending transmit interrupts. */
 783         if (INL(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
 784                 lan_saa9730_tx(dev);
 785
 786         /* Service pending receive interrupts. */
 787         if (INL(&lp->lan_saa9730_regs->DmaStatus) &
 788             (DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
 789              DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
 790
 791         /* Enable the EVM LAN interrupt. */
 792         evm_saa9730_unblock_lan_int(lp);
 793
 794         return IRQ_HANDLED;
 795 }
 796
 797 static int lan_saa9730_open_fail(struct net_device *dev)
 798 {
 799         return -ENODEV;
 800 }
 801
 802 static int lan_saa9730_open(struct net_device *dev)
 803 {
 804         struct lan_saa9730_private *lp =
 805             (struct lan_saa9730_private *) dev->priv;
 806
 807         /* Associate IRQ with lan_saa9730_interrupt */
 808         if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
 809                         dev)) {
 810                 printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
 811                 return -EAGAIN;
 812         }
 813
 814         /* Enable the Lan interrupt in the event manager. */
 815         evm_saa9730_enable_lan_int(lp);
 816
 817         /* Start the LAN controller */
 818         if (lan_saa9730_start(lp))
 819                 return -1;
 820
 821         netif_start_queue(dev);
 822
 823         return 0;
 824 }
 825
 826 static int lan_saa9730_write(struct lan_saa9730_private *lp,
 827                              struct sk_buff *skb, int skblen)
 828 {
 829         unsigned char *pbData = skb->data;
 830         unsigned int len = skblen;
 831         unsigned char *pbPacketData;
 832         unsigned int tx_status;
 833         int BufferIndex;
 834         int PacketIndex;
 835
 836         if (lan_saa9730_debug > 5)
 837                 printk("lan_saa9730_write: skb=%08x\n",
 838                        (unsigned int) skb);
 839
 840         BufferIndex = lp->NextTxmBufferIndex;
 841         PacketIndex = lp->NextTxmPacketIndex;
 842
 843         tx_status =
 844             le32_to_cpu(*(unsigned int *) lp->
 845                         TxmBuffer[BufferIndex][PacketIndex]);
 846         if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
 847             (TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
 848                 if (lan_saa9730_debug > 4)
 849                         printk
 850                             ("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
 851                              tx_status);
 852                 return -1;
 853         }
 854
 855         lp->NextTxmPacketIndex++;
 856         if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
 857                 lp->NextTxmPacketIndex = 0;
 858                 lp->NextTxmBufferIndex ^= 1;
 859         }
 860
 861         pbPacketData =
 862             (unsigned char *) lp->TxmBuffer[BufferIndex][PacketIndex];
 863         pbPacketData += 4;
 864
 865         /* copy the bits */
 866         memcpy(pbPacketData, pbData, len);
 867
 868         /* Set transmit status for hardware */
 869         *(unsigned int *) lp->TxmBuffer[BufferIndex][PacketIndex] =
 870             cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
 871                         (TX_STAT_CTL_INT_AFTER_TX << TX_STAT_CTL_FRAME_SHF)
 872                         | (len << TX_STAT_CTL_LENGTH_SHF));
 873
 874         /* Set hardware tx buffer. */
 875         OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
 876
 877         return 0;
 878 }
 879
 880 static void lan_saa9730_tx_timeout(struct net_device *dev)
 881 {
 882         struct lan_saa9730_private *lp =
 883             (struct lan_saa9730_private *) dev->priv;
 884
 885         /* Transmitter timeout, serious problems */
 886         lp->stats.tx_errors++;
 887         printk("%s: transmit timed out, reset\n", dev->name);
 888         /*show_saa9730_regs(lp); */
 889         lan_saa9730_restart(lp);
 890
 891         dev->trans_start = jiffies;
 892         netif_start_queue(dev);
 893 }
 894
 895 static int lan_saa9730_start_xmit(struct sk_buff *skb,
 896                                   struct net_device *dev)
 897 {
 898         struct lan_saa9730_private *lp =
 899             (struct lan_saa9730_private *) dev->priv;
 900         unsigned long flags;
 901         int skblen;
 902         int len;
 903
 904         if (lan_saa9730_debug > 4)
 905                 printk("Send packet: skb=%08x\n", (unsigned int) skb);
 906
 907         skblen = skb->len;
 908
 909         spin_lock_irqsave(&lp->lock, flags);
 910
 911         len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
 912
 913         if (lan_saa9730_write(lp, skb, skblen)) {
 914                 spin_unlock_irqrestore(&lp->lock, flags);
 915                 printk("Error when writing packet to controller: skb=%08x\n",
 916                      (unsigned int) skb);
 917                 netif_stop_queue(dev);
 918                 return -1;
 919         }
 920
 921         lp->stats.tx_bytes += len;
 922         lp->stats.tx_packets++;
 923
 924         dev->trans_start = jiffies;
 925         netif_start_queue(dev);
 926         dev_kfree_skb(skb);
 927
 928         spin_unlock_irqrestore(&lp->lock, flags);
 929
 930         return 0;
 931 }
 932
 933 static int lan_saa9730_close(struct net_device *dev)
 934 {
 935         struct lan_saa9730_private *lp =
 936             (struct lan_saa9730_private *) dev->priv;
 937
 938         if (lan_saa9730_debug > 1)
 939                 printk("lan_saa9730_close:\n");
 940
 941         netif_stop_queue(dev);
 942
 943         /* Disable the Lan interrupt in the event manager. */
 944         evm_saa9730_disable_lan_int(lp);
 945
 946         /* Stop the controller */
 947         if (lan_saa9730_stop(lp))
 948                 return -1;
 949
 950         free_irq(dev->irq, (void *) dev);
 951
 952         return 0;
 953 }
 954
 955 static struct net_device_stats *lan_saa9730_get_stats(struct net_device
 956                                                       *dev)
 957 {
 958         struct lan_saa9730_private *lp =
 959             (struct lan_saa9730_private *) dev->priv;
 960
 961         return &lp->stats;
 962 }
 963
 964 static void lan_saa9730_set_multicast(struct net_device *dev)
 965 {
 966         struct lan_saa9730_private *lp =
 967             (struct lan_saa9730_private *) dev->priv;
 968
 969         /* Stop the controller */
 970         lan_saa9730_stop(lp);
 971
 972         if (dev->flags & IFF_PROMISC) {
 973                 /* accept all packets */
 974                 OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
 975                      CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
 976                      &lp->lan_saa9730_regs->CamCtl);
 977         } else {
 978                 if (dev->flags & IFF_ALLMULTI) {
 979                         /* accept all multicast packets */
 980                         OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
 981                              CAM_CONTROL_BROAD_ACC,
 982                              &lp->lan_saa9730_regs->CamCtl);
 983                 } else {
 984                         /*
 985                          * Will handle the multicast stuff later. -carstenl
 986                          */
 987                 }
 988         }
 989
 990         lan_saa9730_restart(lp);
 991 }
 992
 993
 994 static void __devexit saa9730_remove_one(struct pci_dev *pdev)
 995 {
 996         struct net_device *dev = pci_get_drvdata(pdev);
 997
 998         if (dev) {
 999                 unregister_netdev(dev);
1000                 kfree(dev->priv);
1001                 free_netdev(dev);
1002                 pci_release_regions(pdev);
1003                 pci_disable_device(pdev);
1004                 pci_set_drvdata(pdev, NULL);
1005         }
1006 }
1007
1008
1009 static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq)
1010 {
1011         struct lan_saa9730_private *lp;
1012         unsigned char ethernet_addr[6];
1013         int ret = 0;
1014
1015         dev->open = lan_saa9730_open_fail;
1016
1017         if (get_ethernet_addr(ethernet_addr))
1018                 return -ENODEV;
1019
1020         memcpy(dev->dev_addr, ethernet_addr, 6);
1021         dev->base_addr = ioaddr;
1022         dev->irq = irq;
1023
1024         /*
1025          * Make certain the data structures used by the controller are aligned
1026          * and DMAble.
1027          */
1028         /*
1029          *  XXX: that is obviously broken - kfree() won't be happy with us.
1030          */
1031         lp = (struct lan_saa9730_private *) (((unsigned long)
1032                                               kmalloc(sizeof(*lp) + 7,
1033                                                       GFP_DMA | GFP_KERNEL)
1034                                               + 7) & ~7);
1035
1036         if (!lp)
1037                 return -ENOMEM;
1038
1039         dev->priv = lp;
1040         memset(lp, 0, sizeof(*lp));
1041
1042         /* Set SAA9730 LAN base address. */
1043         lp->lan_saa9730_regs = (t_lan_saa9730_regmap *) (ioaddr +
1044                                                          SAA9730_LAN_REGS_ADDR);
1045
1046         /* Set SAA9730 EVM base address. */
1047         lp->evm_saa9730_regs = (t_evm_saa9730_regmap *) (ioaddr +
1048                                                          SAA9730_EVM_REGS_ADDR);
1049
1050         /* Allocate LAN RX/TX frame buffer space. */
1051         /* FIXME: a leak */
1052         if ((ret = lan_saa9730_allocate_buffers(lp)))
1053                 goto out;
1054
1055         /* Stop LAN controller. */
1056         if ((ret = lan_saa9730_stop(lp)))
1057                 goto out;
1058
1059         /* Initialize CAM registers. */
1060         if ((ret = lan_saa9730_cam_init(dev)))
1061                 goto out;
1062
1063         /* Initialize MII registers. */
1064         if ((ret = lan_saa9730_mii_init(lp)))
1065                 goto out;
1066
1067         /* Initialize control registers. */
1068         if ((ret = lan_saa9730_control_init(lp)))
1069                 goto out;
1070
1071         /* Load CAM registers. */
1072         if ((ret = lan_saa9730_cam_load(lp)))
1073                 goto out;
1074
1075         /* Initialize DMA context registers. */
1076         if ((ret = lan_saa9730_dma_init(lp)))
1077                 goto out;
1078
1079         spin_lock_init(&lp->lock);
1080
1081         dev->open = lan_saa9730_open;
1082         dev->hard_start_xmit = lan_saa9730_start_xmit;
1083         dev->stop = lan_saa9730_close;
1084         dev->get_stats = lan_saa9730_get_stats;
1085         dev->set_multicast_list = lan_saa9730_set_multicast;
1086         dev->tx_timeout = lan_saa9730_tx_timeout;
1087         dev->watchdog_timeo = (HZ >> 1);
1088         dev->dma = 0;
1089
1090         ret = register_netdev(dev);
1091         if (ret)
1092                 goto out;
1093         return 0;
1094
1095  out:
1096         kfree(dev->priv);
1097         return ret;
1098 }
1099
1100
1101 static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1102 {
1103         struct net_device *dev;
1104         unsigned int pci_ioaddr;
1105         int err;
1106
1107         if (lan_saa9730_debug > 1)
1108                 printk("saa9730.c: PCI bios is present, checking for devices...\n");
1109
1110         err = -ENOMEM;
1111         dev = alloc_etherdev(0);
1112         if (!dev)
1113                 goto out;
1114
1115         SET_MODULE_OWNER(dev);
1116
1117         err = pci_enable_device(pdev);
1118         if (err) {
1119                 printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
1120                 goto out1;
1121         }
1122
1123         err = pci_request_regions(pdev, DRV_MODULE_NAME);
1124         if (err) {
1125                 printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
1126                 goto out2;
1127         }
1128
1129         pci_irq_line = pdev->irq;
1130         /* LAN base address in located at BAR 1. */
1131
1132         pci_ioaddr = pci_resource_start(pdev, 1);
1133         pci_set_master(pdev);
1134
1135         printk("Found SAA9730 (PCI) at %#x, irq %d.\n",
1136                pci_ioaddr, pci_irq_line);
1137
1138         err = lan_saa9730_init(dev, pci_ioaddr, pci_irq_line);
1139         if (err) {
1140                 printk("Lan init failed");
1141                 goto out2;
1142         }
1143
1144         pci_set_drvdata(pdev, dev);
1145         SET_NETDEV_DEV(dev, &pdev->dev);
1146         return 0;
1147
1148 out2:
1149         pci_disable_device(pdev);
1150 out1:
1151         free_netdev(dev);
1152 out:
1153         return err;
1154 }
1155
1156
1157 static struct pci_driver saa9730_driver = {
1158         .name           = DRV_MODULE_NAME,
1159         .id_table       = saa9730_pci_tbl,
1160         .probe          = saa9730_init_one,
1161         .remove         = __devexit_p(saa9730_remove_one),
1162 };
1163
1164
1165 static int __init saa9730_init(void)
1166 {
1167         return pci_module_init(&saa9730_driver);
1168 }
1169
1170 static void __exit saa9730_cleanup(void)
1171 {
1172         pci_unregister_driver(&saa9730_driver);
1173 }
1174
1175 module_init(saa9730_init);
1176 module_exit(saa9730_cleanup);
1177
1178
1179
1180 MODULE_LICENSE("GPL");