2 * linux/arch/arm/mach-sa1100/collie.c
4 * May be copied or modified under the terms of the GNU General Public
5 * License. See linux/COPYING for more information.
7 * This file contains all Collie-specific tweaks.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
14 * 2006 Pavel Machek <pavel@suse.cz>
15 * 03-06-2004 John Lenz <lenz@cs.wisc.edu>
16 * 06-04-2002 Chris Larson <kergoth@digitalnemesis.net>
17 * 04-16-2001 Lineo Japan,Inc. ...
20 #include <linux/init.h>
21 #include <linux/kernel.h>
22 #include <linux/tty.h>
23 #include <linux/delay.h>
24 #include <linux/platform_device.h>
25 #include <linux/mtd/mtd.h>
26 #include <linux/mtd/partitions.h>
27 #include <linux/timer.h>
29 #include <asm/hardware.h>
30 #include <asm/mach-types.h>
32 #include <asm/setup.h>
33 #include <asm/arch/collie.h>
35 #include <asm/mach/arch.h>
36 #include <asm/mach/flash.h>
37 #include <asm/mach/map.h>
38 #include <asm/mach/serial_sa1100.h>
40 #include <asm/hardware/scoop.h>
41 #include <asm/mach/sharpsl_param.h>
42 #include <asm/hardware/locomo.h>
43 #include <asm/arch/mcp.h>
47 static struct resource collie_scoop_resources[] = {
51 .flags = IORESOURCE_MEM,
55 static struct scoop_config collie_scoop_setup = {
56 .io_dir = COLLIE_SCOOP_IO_DIR,
57 .io_out = COLLIE_SCOOP_IO_OUT,
60 struct platform_device colliescoop_device = {
61 .name = "sharp-scoop",
64 .platform_data = &collie_scoop_setup,
66 .num_resources = ARRAY_SIZE(collie_scoop_resources),
67 .resource = collie_scoop_resources,
70 static struct scoop_pcmcia_dev collie_pcmcia_scoop[] = {
72 .dev = &colliescoop_device.dev,
73 .irq = COLLIE_IRQ_GPIO_CF_IRQ,
74 .cd_irq = COLLIE_IRQ_GPIO_CF_CD,
75 .cd_irq_str = "PCMCIA0 CD",
79 static struct scoop_pcmcia_config collie_pcmcia_config = {
80 .devs = &collie_pcmcia_scoop[0],
85 static struct mcp_plat_data collie_mcp_data = {
86 .mccr0 = MCCR0_ADM | MCCR0_ExtClk,
90 #ifdef CONFIG_SHARP_LOCOMO
92 * low-level UART features.
94 struct platform_device collie_locomo_device;
96 static void collie_uart_set_mctrl(struct uart_port *port, u_int mctrl)
98 if (mctrl & TIOCM_RTS)
99 locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 0);
101 locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_RTS, 1);
103 if (mctrl & TIOCM_DTR)
104 locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 0);
106 locomo_gpio_write(&collie_locomo_device.dev, LOCOMO_GPIO_DTR, 1);
109 static u_int collie_uart_get_mctrl(struct uart_port *port)
114 r = locomo_gpio_read_output(&collie_locomo_device.dev, LOCOMO_GPIO_CTS & LOCOMO_GPIO_DSR);
117 if (r & LOCOMO_GPIO_CTS)
119 if (r & LOCOMO_GPIO_DSR)
125 static struct sa1100_port_fns collie_port_fns __initdata = {
126 .set_mctrl = collie_uart_set_mctrl,
127 .get_mctrl = collie_uart_get_mctrl,
130 static int collie_uart_probe(struct locomo_dev *dev)
135 static int collie_uart_remove(struct locomo_dev *dev)
140 static struct locomo_driver collie_uart_driver = {
142 .name = "collie_uart",
144 .devid = LOCOMO_DEVID_UART,
145 .probe = collie_uart_probe,
146 .remove = collie_uart_remove,
149 static int __init collie_uart_init(void) {
150 return locomo_driver_register(&collie_uart_driver);
152 device_initcall(collie_uart_init);
157 static struct resource locomo_resources[] = {
161 .flags = IORESOURCE_MEM,
166 .flags = IORESOURCE_IRQ,
170 struct platform_device collie_locomo_device = {
173 .num_resources = ARRAY_SIZE(locomo_resources),
174 .resource = locomo_resources,
177 static struct platform_device *devices[] __initdata = {
178 &collie_locomo_device,
182 static struct mtd_partition collie_partitions[] = {
184 .name = "bootloader",
187 .mask_flags = MTD_WRITEABLE
190 .offset = MTDPART_OFS_APPEND,
194 .offset = MTDPART_OFS_APPEND,
199 static void collie_set_vpp(int vpp)
201 write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
203 write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
205 write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
208 static struct flash_platform_data collie_flash_data = {
209 .map_name = "cfi_probe",
210 .set_vpp = collie_set_vpp,
211 .parts = collie_partitions,
212 .nr_parts = ARRAY_SIZE(collie_partitions),
215 static struct resource collie_flash_resources[] = {
217 .start = SA1100_CS0_PHYS,
218 .end = SA1100_CS0_PHYS + SZ_32M - 1,
219 .flags = IORESOURCE_MEM,
223 static void __init collie_init(void)
228 GAFR = ( GPIO_SSP_TXD | \
229 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
232 GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
233 GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
234 GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
235 GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
239 PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
240 PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
241 PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
243 PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
245 GAFR |= GPIO_32_768kHz;
246 GPDR |= GPIO_32_768kHz;
247 TUCR = TUCR_32_768kHz;
249 platform_scoop_config = &collie_pcmcia_config;
251 ret = platform_add_devices(devices, ARRAY_SIZE(devices));
253 printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
256 sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
257 ARRAY_SIZE(collie_flash_resources));
258 sa11x0_set_mcp_data(&collie_mcp_data);
260 sharpsl_save_param();
263 static struct map_desc collie_io_desc[] __initdata = {
264 { /* 32M main flash (cs0) */
265 .virtual = 0xe8000000,
266 .pfn = __phys_to_pfn(0x00000000),
267 .length = 0x02000000,
269 }, { /* 32M boot flash (cs1) */
270 .virtual = 0xea000000,
271 .pfn = __phys_to_pfn(0x08000000),
272 .length = 0x02000000,
277 static void __init collie_map_io(void)
280 iotable_init(collie_io_desc, ARRAY_SIZE(collie_io_desc));
282 #ifdef CONFIG_SHARP_LOCOMO
283 sa1100_register_uart_fns(&collie_port_fns);
285 sa1100_register_uart(0, 3);
286 sa1100_register_uart(1, 1);
289 MACHINE_START(COLLIE, "Sharp-Collie")
290 .phys_io = 0x80000000,
291 .io_pg_offst = ((0xf8000000) >> 18) & 0xfffc,
292 .map_io = collie_map_io,
293 .init_irq = sa1100_init_irq,
294 .timer = &sa1100_timer,
295 .init_machine = collie_init,