git.oblomov.eu Git - linux-2.6/blob - arch/arm/mach-pxa/lpd270.c

   1 /*
   2  * linux/arch/arm/mach-pxa/lpd270.c
   3  *
   4  * Support for the LogicPD PXA270 Card Engine.
   5  * Derived from the mainstone code, which carries these notices:
   6  *
   7  * Author:      Nicolas Pitre
   8  * Created:     Nov 05, 2002
   9  * Copyright:   MontaVista Software Inc.
  10  *
  11  * This program is free software; you can redistribute it and/or modify
  12  * it under the terms of the GNU General Public License version 2 as
  13  * published by the Free Software Foundation.
  14  */
  15
  16 #include <linux/init.h>
  17 #include <linux/platform_device.h>
  18 #include <linux/sysdev.h>
  19 #include <linux/interrupt.h>
  20 #include <linux/sched.h>
  21 #include <linux/bitops.h>
  22 #include <linux/fb.h>
  23 #include <linux/ioport.h>
  24 #include <linux/mtd/mtd.h>
  25 #include <linux/mtd/partitions.h>
  26
  27 #include <asm/types.h>
  28 #include <asm/setup.h>
  29 #include <asm/memory.h>
  30 #include <asm/mach-types.h>
  31 #include <asm/hardware.h>
  32 #include <asm/irq.h>
  33 #include <asm/sizes.h>
  34
  35 #include <asm/mach/arch.h>
  36 #include <asm/mach/map.h>
  37 #include <asm/mach/irq.h>
  38 #include <asm/mach/flash.h>
  39
  40 #include <asm/arch/pxa-regs.h>
  41 #include <asm/arch/pxa2xx-regs.h>
  42 #include <asm/arch/lpd270.h>
  43 #include <asm/arch/audio.h>
  44 #include <asm/arch/pxafb.h>
  45 #include <asm/arch/mmc.h>
  46 #include <asm/arch/irda.h>
  47 #include <asm/arch/ohci.h>
  48
  49 #include "generic.h"
  50 #include "devices.h"
  51
  52
  53 static unsigned int lpd270_irq_enabled;
  54
  55 static void lpd270_mask_irq(unsigned int irq)
  56 {
  57         int lpd270_irq = irq - LPD270_IRQ(0);
  58
  59         __raw_writew(~(1 << lpd270_irq), LPD270_INT_STATUS);
  60
  61         lpd270_irq_enabled &= ~(1 << lpd270_irq);
  62         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
  63 }
  64
  65 static void lpd270_unmask_irq(unsigned int irq)
  66 {
  67         int lpd270_irq = irq - LPD270_IRQ(0);
  68
  69         lpd270_irq_enabled |= 1 << lpd270_irq;
  70         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
  71 }
  72
  73 static struct irq_chip lpd270_irq_chip = {
  74         .name           = "CPLD",
  75         .ack            = lpd270_mask_irq,
  76         .mask           = lpd270_mask_irq,
  77         .unmask         = lpd270_unmask_irq,
  78 };
  79
  80 static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
  81 {
  82         unsigned long pending;
  83
  84         pending = __raw_readw(LPD270_INT_STATUS) & lpd270_irq_enabled;
  85         do {
  86                 GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
  87                 if (likely(pending)) {
  88                         irq = LPD270_IRQ(0) + __ffs(pending);
  89                         desc = irq_desc + irq;
  90                         desc_handle_irq(irq, desc);
  91
  92                         pending = __raw_readw(LPD270_INT_STATUS) &
  93                                                 lpd270_irq_enabled;
  94                 }
  95         } while (pending);
  96 }
  97
  98 static void __init lpd270_init_irq(void)
  99 {
 100         int irq;
 101
 102         pxa27x_init_irq();
 103
 104         __raw_writew(0, LPD270_INT_MASK);
 105         __raw_writew(0, LPD270_INT_STATUS);
 106
 107         /* setup extra LogicPD PXA270 irqs */
 108         for (irq = LPD270_IRQ(2); irq <= LPD270_IRQ(4); irq++) {
 109                 set_irq_chip(irq, &lpd270_irq_chip);
 110                 set_irq_handler(irq, handle_level_irq);
 111                 set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 112         }
 113         set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
 114         set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
 115 }
 116
 117
 118 #ifdef CONFIG_PM
 119 static int lpd270_irq_resume(struct sys_device *dev)
 120 {
 121         __raw_writew(lpd270_irq_enabled, LPD270_INT_MASK);
 122         return 0;
 123 }
 124
 125 static struct sysdev_class lpd270_irq_sysclass = {
 126         .name = "cpld_irq",
 127         .resume = lpd270_irq_resume,
 128 };
 129
 130 static struct sys_device lpd270_irq_device = {
 131         .cls = &lpd270_irq_sysclass,
 132 };
 133
 134 static int __init lpd270_irq_device_init(void)
 135 {
 136         int ret = sysdev_class_register(&lpd270_irq_sysclass);
 137         if (ret == 0)
 138                 ret = sysdev_register(&lpd270_irq_device);
 139         return ret;
 140 }
 141
 142 device_initcall(lpd270_irq_device_init);
 143 #endif
 144
 145
 146 static struct resource smc91x_resources[] = {
 147         [0] = {
 148                 .start  = LPD270_ETH_PHYS,
 149                 .end    = (LPD270_ETH_PHYS + 0xfffff),
 150                 .flags  = IORESOURCE_MEM,
 151         },
 152         [1] = {
 153                 .start  = LPD270_ETHERNET_IRQ,
 154                 .end    = LPD270_ETHERNET_IRQ,
 155                 .flags  = IORESOURCE_IRQ,
 156         },
 157 };
 158
 159 static struct platform_device smc91x_device = {
 160         .name           = "smc91x",
 161         .id             = 0,
 162         .num_resources  = ARRAY_SIZE(smc91x_resources),
 163         .resource       = smc91x_resources,
 164 };
 165
 166 static struct platform_device lpd270_audio_device = {
 167         .name           = "pxa2xx-ac97",
 168         .id             = -1,
 169 };
 170
 171 static struct resource lpd270_flash_resources[] = {
 172         [0] = {
 173                 .start  = PXA_CS0_PHYS,
 174                 .end    = PXA_CS0_PHYS + SZ_64M - 1,
 175                 .flags  = IORESOURCE_MEM,
 176         },
 177         [1] = {
 178                 .start  = PXA_CS1_PHYS,
 179                 .end    = PXA_CS1_PHYS + SZ_64M - 1,
 180                 .flags  = IORESOURCE_MEM,
 181         },
 182 };
 183
 184 static struct mtd_partition lpd270_flash0_partitions[] = {
 185         {
 186                 .name =         "Bootloader",
 187                 .size =         0x00040000,
 188                 .offset =       0,
 189                 .mask_flags =   MTD_WRITEABLE  /* force read-only */
 190         }, {
 191                 .name =         "Kernel",
 192                 .size =         0x00400000,
 193                 .offset =       0x00040000,
 194         }, {
 195                 .name =         "Filesystem",
 196                 .size =         MTDPART_SIZ_FULL,
 197                 .offset =       0x00440000
 198         },
 199 };
 200
 201 static struct flash_platform_data lpd270_flash_data[2] = {
 202         {
 203                 .name           = "processor-flash",
 204                 .map_name       = "cfi_probe",
 205                 .parts          = lpd270_flash0_partitions,
 206                 .nr_parts       = ARRAY_SIZE(lpd270_flash0_partitions),
 207         }, {
 208                 .name           = "mainboard-flash",
 209                 .map_name       = "cfi_probe",
 210                 .parts          = NULL,
 211                 .nr_parts       = 0,
 212         }
 213 };
 214
 215 static struct platform_device lpd270_flash_device[2] = {
 216         {
 217                 .name           = "pxa2xx-flash",
 218                 .id             = 0,
 219                 .dev = {
 220                         .platform_data  = &lpd270_flash_data[0],
 221                 },
 222                 .resource       = &lpd270_flash_resources[0],
 223                 .num_resources  = 1,
 224         }, {
 225                 .name           = "pxa2xx-flash",
 226                 .id             = 1,
 227                 .dev = {
 228                         .platform_data  = &lpd270_flash_data[1],
 229                 },
 230                 .resource       = &lpd270_flash_resources[1],
 231                 .num_resources  = 1,
 232         },
 233 };
 234
 235 static void lpd270_backlight_power(int on)
 236 {
 237         if (on) {
 238                 pxa_gpio_mode(GPIO16_PWM0_MD);
 239                 pxa_set_cken(CKEN_PWM0, 1);
 240                 PWM_CTRL0 = 0;
 241                 PWM_PWDUTY0 = 0x3ff;
 242                 PWM_PERVAL0 = 0x3ff;
 243         } else {
 244                 PWM_CTRL0 = 0;
 245                 PWM_PWDUTY0 = 0x0;
 246                 PWM_PERVAL0 = 0x3FF;
 247                 pxa_set_cken(CKEN_PWM0, 0);
 248         }
 249 }
 250
 251 /* 5.7" TFT QVGA (LoLo display number 1) */
 252 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 253         .pixclock               = 150000,
 254         .xres                   = 320,
 255         .yres                   = 240,
 256         .bpp                    = 16,
 257         .hsync_len              = 0x14,
 258         .left_margin            = 0x28,
 259         .right_margin           = 0x0a,
 260         .vsync_len              = 0x02,
 261         .upper_margin           = 0x08,
 262         .lower_margin           = 0x14,
 263         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 264 };
 265
 266 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 267         .modes                  = &sharp_lq057q3dc02_mode,
 268         .num_modes              = 1,
 269         .lccr0                  = 0x07800080,
 270         .lccr3                  = 0x00400000,
 271         .pxafb_backlight_power  = lpd270_backlight_power,
 272 };
 273
 274 /* 12.1" TFT SVGA (LoLo display number 2) */
 275 static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 276         .pixclock               = 50000,
 277         .xres                   = 800,
 278         .yres                   = 600,
 279         .bpp                    = 16,
 280         .hsync_len              = 0x05,
 281         .left_margin            = 0x52,
 282         .right_margin           = 0x05,
 283         .vsync_len              = 0x04,
 284         .upper_margin           = 0x14,
 285         .lower_margin           = 0x0a,
 286         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 287 };
 288
 289 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 290         .modes                  = &sharp_lq121s1dg31_mode,
 291         .num_modes              = 1,
 292         .lccr0                  = 0x07800080,
 293         .lccr3                  = 0x00400000,
 294         .pxafb_backlight_power  = lpd270_backlight_power,
 295 };
 296
 297 /* 3.6" TFT QVGA (LoLo display number 3) */
 298 static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 299         .pixclock               = 150000,
 300         .xres                   = 320,
 301         .yres                   = 240,
 302         .bpp                    = 16,
 303         .hsync_len              = 0x0e,
 304         .left_margin            = 0x04,
 305         .right_margin           = 0x0a,
 306         .vsync_len              = 0x03,
 307         .upper_margin           = 0x03,
 308         .lower_margin           = 0x03,
 309         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 310 };
 311
 312 static struct pxafb_mach_info sharp_lq036q1da01 = {
 313         .modes                  = &sharp_lq036q1da01_mode,
 314         .num_modes              = 1,
 315         .lccr0                  = 0x07800080,
 316         .lccr3                  = 0x00400000,
 317         .pxafb_backlight_power  = lpd270_backlight_power,
 318 };
 319
 320 /* 6.4" TFT VGA (LoLo display number 5) */
 321 static struct pxafb_mode_info sharp_lq64d343_mode = {
 322         .pixclock               = 25000,
 323         .xres                   = 640,
 324         .yres                   = 480,
 325         .bpp                    = 16,
 326         .hsync_len              = 0x31,
 327         .left_margin            = 0x89,
 328         .right_margin           = 0x19,
 329         .vsync_len              = 0x12,
 330         .upper_margin           = 0x22,
 331         .lower_margin           = 0x00,
 332         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 333 };
 334
 335 static struct pxafb_mach_info sharp_lq64d343 = {
 336         .modes                  = &sharp_lq64d343_mode,
 337         .num_modes              = 1,
 338         .lccr0                  = 0x07800080,
 339         .lccr3                  = 0x00400000,
 340         .pxafb_backlight_power  = lpd270_backlight_power,
 341 };
 342
 343 /* 10.4" TFT VGA (LoLo display number 7) */
 344 static struct pxafb_mode_info sharp_lq10d368_mode = {
 345         .pixclock               = 25000,
 346         .xres                   = 640,
 347         .yres                   = 480,
 348         .bpp                    = 16,
 349         .hsync_len              = 0x31,
 350         .left_margin            = 0x89,
 351         .right_margin           = 0x19,
 352         .vsync_len              = 0x12,
 353         .upper_margin           = 0x22,
 354         .lower_margin           = 0x00,
 355         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 356 };
 357
 358 static struct pxafb_mach_info sharp_lq10d368 = {
 359         .modes                  = &sharp_lq10d368_mode,
 360         .num_modes              = 1,
 361         .lccr0                  = 0x07800080,
 362         .lccr3                  = 0x00400000,
 363         .pxafb_backlight_power  = lpd270_backlight_power,
 364 };
 365
 366 /* 3.5" TFT QVGA (LoLo display number 8) */
 367 static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 368         .pixclock               = 150000,
 369         .xres                   = 240,
 370         .yres                   = 320,
 371         .bpp                    = 16,
 372         .hsync_len              = 0x0e,
 373         .left_margin            = 0x0a,
 374         .right_margin           = 0x0a,
 375         .vsync_len              = 0x03,
 376         .upper_margin           = 0x05,
 377         .lower_margin           = 0x14,
 378         .sync                   = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 379 };
 380
 381 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 382         .modes                  = &sharp_lq035q7db02_20_mode,
 383         .num_modes              = 1,
 384         .lccr0                  = 0x07800080,
 385         .lccr3                  = 0x00400000,
 386         .pxafb_backlight_power  = lpd270_backlight_power,
 387 };
 388
 389 static struct pxafb_mach_info *lpd270_lcd_to_use;
 390
 391 static int __init lpd270_set_lcd(char *str)
 392 {
 393         if (!strnicmp(str, "lq057q3dc02", 11)) {
 394                 lpd270_lcd_to_use = &sharp_lq057q3dc02;
 395         } else if (!strnicmp(str, "lq121s1dg31", 11)) {
 396                 lpd270_lcd_to_use = &sharp_lq121s1dg31;
 397         } else if (!strnicmp(str, "lq036q1da01", 11)) {
 398                 lpd270_lcd_to_use = &sharp_lq036q1da01;
 399         } else if (!strnicmp(str, "lq64d343", 8)) {
 400                 lpd270_lcd_to_use = &sharp_lq64d343;
 401         } else if (!strnicmp(str, "lq10d368", 8)) {
 402                 lpd270_lcd_to_use = &sharp_lq10d368;
 403         } else if (!strnicmp(str, "lq035q7db02-20", 14)) {
 404                 lpd270_lcd_to_use = &sharp_lq035q7db02_20;
 405         } else {
 406                 printk(KERN_INFO "lpd270: unknown lcd panel [%s]\n", str);
 407         }
 408
 409         return 1;
 410 }
 411
 412 __setup("lcd=", lpd270_set_lcd);
 413
 414 static struct platform_device *platform_devices[] __initdata = {
 415         &smc91x_device,
 416         &lpd270_audio_device,
 417         &lpd270_flash_device[0],
 418         &lpd270_flash_device[1],
 419 };
 420
 421 static int lpd270_ohci_init(struct device *dev)
 422 {
 423         /* setup Port1 GPIO pin. */
 424         pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);   /* USBHPWR1 */
 425         pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);  /* USBHPEN1 */
 426
 427         /* Set the Power Control Polarity Low and Power Sense
 428            Polarity Low to active low. */
 429         UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
 430                 ~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
 431
 432         return 0;
 433 }
 434
 435 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 436         .port_mode      = PMM_PERPORT_MODE,
 437         .init           = lpd270_ohci_init,
 438 };
 439
 440 static void __init lpd270_init(void)
 441 {
 442         lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 443         lpd270_flash_data[1].width = 4;
 444
 445         /*
 446          * System bus arbiter setting:
 447          * - Core_Park
 448          * - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
 449          */
 450         ARB_CNTRL = ARB_CORE_PARK | 0x234;
 451
 452         /*
 453          * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
 454          */
 455         pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
 456
 457         platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 458
 459         if (lpd270_lcd_to_use != NULL)
 460                 set_pxa_fb_info(lpd270_lcd_to_use);
 461
 462         pxa_set_ohci_info(&lpd270_ohci_platform_data);
 463 }
 464
 465
 466 static struct map_desc lpd270_io_desc[] __initdata = {
 467         {
 468                 .virtual        = LPD270_CPLD_VIRT,
 469                 .pfn            = __phys_to_pfn(LPD270_CPLD_PHYS),
 470                 .length         = LPD270_CPLD_SIZE,
 471                 .type           = MT_DEVICE,
 472         },
 473 };
 474
 475 static void __init lpd270_map_io(void)
 476 {
 477         pxa_map_io();
 478         iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 479
 480         /* initialize sleep mode regs (wake-up sources, etc) */
 481         PGSR0 = 0x00008800;
 482         PGSR1 = 0x00000002;
 483         PGSR2 = 0x0001FC00;
 484         PGSR3 = 0x00001F81;
 485         PWER  = 0xC0000002;
 486         PRER  = 0x00000002;
 487         PFER  = 0x00000002;
 488
 489         /* for use I SRAM as framebuffer.  */
 490         PSLR |= 0x00000F04;
 491         PCFR  = 0x00000066;
 492 }
 493
 494 MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine")
 495         /* Maintainer: Peter Barada */
 496         .phys_io        = 0x40000000,
 497         .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
 498         .boot_params    = 0xa0000100,
 499         .map_io         = lpd270_map_io,
 500         .init_irq       = lpd270_init_irq,
 501         .timer          = &pxa_timer,
 502         .init_machine   = lpd270_init,
 503 MACHINE_END