git.oblomov.eu Git - linux-2.6/blob - arch/blackfin/mach-bf537/boards/cm_bf537.c

   1 /*
   2  * File:         arch/blackfin/mach-bf537/boards/cm_bf537.c
   3  * Based on:     arch/blackfin/mach-bf533/boards/ezkit.c
   4  * Author:       Aidan Williams <aidan@nicta.com.au>
   5  *
   6  * Created:      2005
   7  * Description:  Board description file
   8  *
   9  * Modified:
  10  *               Copyright 2005 National ICT Australia (NICTA)
  11  *               Copyright 2004-2006 Analog Devices Inc.
  12  *
  13  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
  14  *
  15  * This program is free software; you can redistribute it and/or modify
  16  * it under the terms of the GNU General Public License as published by
  17  * the Free Software Foundation; either version 2 of the License, or
  18  * (at your option) any later version.
  19  *
  20  * This program is distributed in the hope that it will be useful,
  21  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  22  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  23  * GNU General Public License for more details.
  24  *
  25  * You should have received a copy of the GNU General Public License
  26  * along with this program; if not, see the file COPYING, or write
  27  * to the Free Software Foundation, Inc.,
  28  * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  29  */
  30
  31 #include <linux/device.h>
  32 #include <linux/etherdevice.h>
  33 #include <linux/platform_device.h>
  34 #include <linux/mtd/mtd.h>
  35 #include <linux/mtd/partitions.h>
  36 #include <linux/mtd/physmap.h>
  37 #include <linux/spi/spi.h>
  38 #include <linux/spi/flash.h>
  39 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
  40 #include <linux/usb/isp1362.h>
  41 #endif
  42 #include <linux/ata_platform.h>
  43 #include <linux/irq.h>
  44 #include <asm/dma.h>
  45 #include <asm/bfin5xx_spi.h>
  46 #include <asm/portmux.h>
  47 #include <asm/dpmc.h>
  48
  49 /*
  50  * Name the Board for the /proc/cpuinfo
  51  */
  52 const char bfin_board_name[] = "Bluetechnix CM BF537";
  53
  54 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
  55 /* all SPI peripherals info goes here */
  56
  57 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
  58 static struct mtd_partition bfin_spi_flash_partitions[] = {
  59         {
  60                 .name = "bootloader(spi)",
  61                 .size = 0x00020000,
  62                 .offset = 0,
  63                 .mask_flags = MTD_CAP_ROM
  64         }, {
  65                 .name = "linux kernel(spi)",
  66                 .size = 0xe0000,
  67                 .offset = 0x20000
  68         }, {
  69                 .name = "file system(spi)",
  70                 .size = 0x700000,
  71                 .offset = 0x00100000,
  72         }
  73 };
  74
  75 static struct flash_platform_data bfin_spi_flash_data = {
  76         .name = "m25p80",
  77         .parts = bfin_spi_flash_partitions,
  78         .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
  79         .type = "m25p64",
  80 };
  81
  82 /* SPI flash chip (m25p64) */
  83 static struct bfin5xx_spi_chip spi_flash_chip_info = {
  84         .enable_dma = 0,         /* use dma transfer with this chip*/
  85         .bits_per_word = 8,
  86 };
  87 #endif
  88
  89 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
  90 /* SPI ADC chip */
  91 static struct bfin5xx_spi_chip spi_adc_chip_info = {
  92         .enable_dma = 1,         /* use dma transfer with this chip*/
  93         .bits_per_word = 16,
  94 };
  95 #endif
  96
  97 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
  98 static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
  99         .enable_dma = 0,
 100         .bits_per_word = 16,
 101 };
 102 #endif
 103
 104 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 105 static struct bfin5xx_spi_chip ad9960_spi_chip_info = {
 106         .enable_dma = 0,
 107         .bits_per_word = 16,
 108 };
 109 #endif
 110
 111 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 112 static struct bfin5xx_spi_chip  mmc_spi_chip_info = {
 113         .enable_dma = 0,
 114         .bits_per_word = 8,
 115 };
 116 #endif
 117
 118 static struct spi_board_info bfin_spi_board_info[] __initdata = {
 119 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 120         {
 121                 /* the modalias must be the same as spi device driver name */
 122                 .modalias = "m25p80", /* Name of spi_driver for this device */
 123                 .max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 124                 .bus_num = 0, /* Framework bus number */
 125                 .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
 126                 .platform_data = &bfin_spi_flash_data,
 127                 .controller_data = &spi_flash_chip_info,
 128                 .mode = SPI_MODE_3,
 129         },
 130 #endif
 131
 132 #if defined(CONFIG_BFIN_SPI_ADC) || defined(CONFIG_BFIN_SPI_ADC_MODULE)
 133         {
 134                 .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 135                 .max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
 136                 .bus_num = 0, /* Framework bus number */
 137                 .chip_select = 1, /* Framework chip select. */
 138                 .platform_data = NULL, /* No spi_driver specific config */
 139                 .controller_data = &spi_adc_chip_info,
 140         },
 141 #endif
 142
 143 #if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
 144         {
 145                 .modalias = "ad1836-spi",
 146                 .max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
 147                 .bus_num = 0,
 148                 .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT,
 149                 .controller_data = &ad1836_spi_chip_info,
 150         },
 151 #endif
 152
 153 #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE)
 154         {
 155                 .modalias = "ad9960-spi",
 156                 .max_speed_hz = 10000000,     /* max spi clock (SCK) speed in HZ */
 157                 .bus_num = 0,
 158                 .chip_select = 1,
 159                 .controller_data = &ad9960_spi_chip_info,
 160         },
 161 #endif
 162
 163 #if defined(CONFIG_MMC_SPI) || defined(CONFIG_MMC_SPI_MODULE)
 164         {
 165                 .modalias = "mmc_spi",
 166                 .max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
 167                 .bus_num = 0,
 168                 .chip_select = 1,
 169                 .controller_data = &mmc_spi_chip_info,
 170                 .mode = SPI_MODE_3,
 171         },
 172 #endif
 173 };
 174
 175 /* SPI (0) */
 176 static struct resource bfin_spi0_resource[] = {
 177         [0] = {
 178                 .start = SPI0_REGBASE,
 179                 .end   = SPI0_REGBASE + 0xFF,
 180                 .flags = IORESOURCE_MEM,
 181                 },
 182         [1] = {
 183                 .start = CH_SPI,
 184                 .end   = CH_SPI,
 185                 .flags = IORESOURCE_DMA,
 186         },
 187         [2] = {
 188                 .start = IRQ_SPI,
 189                 .end   = IRQ_SPI,
 190                 .flags = IORESOURCE_IRQ,
 191         },
 192 };
 193
 194 /* SPI controller data */
 195 static struct bfin5xx_spi_master bfin_spi0_info = {
 196         .num_chipselect = 8,
 197         .enable_dma = 1,  /* master has the ability to do dma transfer */
 198         .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
 199 };
 200
 201 static struct platform_device bfin_spi0_device = {
 202         .name = "bfin-spi",
 203         .id = 0, /* Bus number */
 204         .num_resources = ARRAY_SIZE(bfin_spi0_resource),
 205         .resource = bfin_spi0_resource,
 206         .dev = {
 207                 .platform_data = &bfin_spi0_info, /* Passed to driver */
 208         },
 209 };
 210 #endif  /* spi master and devices */
 211
 212 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 213 static struct platform_device rtc_device = {
 214         .name = "rtc-bfin",
 215         .id   = -1,
 216 };
 217 #endif
 218
 219 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 220 static struct platform_device hitachi_fb_device = {
 221         .name = "hitachi-tx09",
 222 };
 223 #endif
 224
 225 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 226 static struct resource smc91x_resources[] = {
 227         {
 228                 .start = 0x20200300,
 229                 .end = 0x20200300 + 16,
 230                 .flags = IORESOURCE_MEM,
 231         }, {
 232                 .start = IRQ_PF14,
 233                 .end = IRQ_PF14,
 234                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 235                 },
 236 };
 237
 238 static struct platform_device smc91x_device = {
 239         .name = "smc91x",
 240         .id = 0,
 241         .num_resources = ARRAY_SIZE(smc91x_resources),
 242         .resource = smc91x_resources,
 243 };
 244 #endif
 245
 246 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 247 static struct resource isp1362_hcd_resources[] = {
 248         {
 249                 .start = 0x20308000,
 250                 .end = 0x20308000,
 251                 .flags = IORESOURCE_MEM,
 252         }, {
 253                 .start = 0x20308004,
 254                 .end = 0x20308004,
 255                 .flags = IORESOURCE_MEM,
 256         }, {
 257                 .start = IRQ_PG15,
 258                 .end = IRQ_PG15,
 259                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 260         },
 261 };
 262
 263 static struct isp1362_platform_data isp1362_priv = {
 264         .sel15Kres = 1,
 265         .clknotstop = 0,
 266         .oc_enable = 0,
 267         .int_act_high = 0,
 268         .int_edge_triggered = 0,
 269         .remote_wakeup_connected = 0,
 270         .no_power_switching = 1,
 271         .power_switching_mode = 0,
 272 };
 273
 274 static struct platform_device isp1362_hcd_device = {
 275         .name = "isp1362-hcd",
 276         .id = 0,
 277         .dev = {
 278                 .platform_data = &isp1362_priv,
 279         },
 280         .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
 281         .resource = isp1362_hcd_resources,
 282 };
 283 #endif
 284
 285 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 286 static struct resource net2272_bfin_resources[] = {
 287         {
 288                 .start = 0x20200000,
 289                 .end = 0x20200000 + 0x100,
 290                 .flags = IORESOURCE_MEM,
 291         }, {
 292                 .start = IRQ_PH14,
 293                 .end = IRQ_PH14,
 294                 .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
 295         },
 296 };
 297
 298 static struct platform_device net2272_bfin_device = {
 299         .name = "net2272",
 300         .id = -1,
 301         .num_resources = ARRAY_SIZE(net2272_bfin_resources),
 302         .resource = net2272_bfin_resources,
 303 };
 304 #endif
 305
 306 static struct resource bfin_gpios_resources = {
 307         .start = 0,
 308         .end   = MAX_BLACKFIN_GPIOS - 1,
 309         .flags = IORESOURCE_IRQ,
 310 };
 311
 312 static struct platform_device bfin_gpios_device = {
 313         .name = "simple-gpio",
 314         .id = -1,
 315         .num_resources = 1,
 316         .resource = &bfin_gpios_resources,
 317 };
 318
 319 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 320 static struct mtd_partition cm_partitions[] = {
 321         {
 322                 .name   = "bootloader(nor)",
 323                 .size   = 0x40000,
 324                 .offset = 0,
 325         }, {
 326                 .name   = "linux kernel(nor)",
 327                 .size   = 0xE0000,
 328                 .offset = MTDPART_OFS_APPEND,
 329         }, {
 330                 .name   = "file system(nor)",
 331                 .size   = MTDPART_SIZ_FULL,
 332                 .offset = MTDPART_OFS_APPEND,
 333         }
 334 };
 335
 336 static struct physmap_flash_data cm_flash_data = {
 337         .width    = 2,
 338         .parts    = cm_partitions,
 339         .nr_parts = ARRAY_SIZE(cm_partitions),
 340 };
 341
 342 static unsigned cm_flash_gpios[] = { GPIO_PF4 };
 343
 344 static struct resource cm_flash_resource[] = {
 345         {
 346                 .name  = "cfi_probe",
 347                 .start = 0x20000000,
 348                 .end   = 0x201fffff,
 349                 .flags = IORESOURCE_MEM,
 350         }, {
 351                 .start = (unsigned long)cm_flash_gpios,
 352                 .end   = ARRAY_SIZE(cm_flash_gpios),
 353                 .flags = IORESOURCE_IRQ,
 354         }
 355 };
 356
 357 static struct platform_device cm_flash_device = {
 358         .name          = "gpio-addr-flash",
 359         .id            = 0,
 360         .dev = {
 361                 .platform_data = &cm_flash_data,
 362         },
 363         .num_resources = ARRAY_SIZE(cm_flash_resource),
 364         .resource      = cm_flash_resource,
 365 };
 366 #endif
 367
 368 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 369 static struct resource bfin_uart_resources[] = {
 370         {
 371                 .start = 0xFFC00400,
 372                 .end = 0xFFC004FF,
 373                 .flags = IORESOURCE_MEM,
 374         }, {
 375                 .start = 0xFFC02000,
 376                 .end = 0xFFC020FF,
 377                 .flags = IORESOURCE_MEM,
 378         },
 379 };
 380
 381 static struct platform_device bfin_uart_device = {
 382         .name = "bfin-uart",
 383         .id = 1,
 384         .num_resources = ARRAY_SIZE(bfin_uart_resources),
 385         .resource = bfin_uart_resources,
 386 };
 387 #endif
 388
 389 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 390 #ifdef CONFIG_BFIN_SIR0
 391 static struct resource bfin_sir0_resources[] = {
 392         {
 393                 .start = 0xFFC00400,
 394                 .end = 0xFFC004FF,
 395                 .flags = IORESOURCE_MEM,
 396         },
 397         {
 398                 .start = IRQ_UART0_RX,
 399                 .end = IRQ_UART0_RX+1,
 400                 .flags = IORESOURCE_IRQ,
 401         },
 402         {
 403                 .start = CH_UART0_RX,
 404                 .end = CH_UART0_RX+1,
 405                 .flags = IORESOURCE_DMA,
 406         },
 407 };
 408 static struct platform_device bfin_sir0_device = {
 409         .name = "bfin_sir",
 410         .id = 0,
 411         .num_resources = ARRAY_SIZE(bfin_sir0_resources),
 412         .resource = bfin_sir0_resources,
 413 };
 414 #endif
 415 #ifdef CONFIG_BFIN_SIR1
 416 static struct resource bfin_sir1_resources[] = {
 417         {
 418                 .start = 0xFFC02000,
 419                 .end = 0xFFC020FF,
 420                 .flags = IORESOURCE_MEM,
 421         },
 422         {
 423                 .start = IRQ_UART1_RX,
 424                 .end = IRQ_UART1_RX+1,
 425                 .flags = IORESOURCE_IRQ,
 426         },
 427         {
 428                 .start = CH_UART1_RX,
 429                 .end = CH_UART1_RX+1,
 430                 .flags = IORESOURCE_DMA,
 431         },
 432 };
 433 static struct platform_device bfin_sir1_device = {
 434         .name = "bfin_sir",
 435         .id = 1,
 436         .num_resources = ARRAY_SIZE(bfin_sir1_resources),
 437         .resource = bfin_sir1_resources,
 438 };
 439 #endif
 440 #endif
 441
 442 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 443 static struct resource bfin_twi0_resource[] = {
 444         [0] = {
 445                 .start = TWI0_REGBASE,
 446                 .end   = TWI0_REGBASE,
 447                 .flags = IORESOURCE_MEM,
 448         },
 449         [1] = {
 450                 .start = IRQ_TWI,
 451                 .end   = IRQ_TWI,
 452                 .flags = IORESOURCE_IRQ,
 453         },
 454 };
 455
 456 static struct platform_device i2c_bfin_twi_device = {
 457         .name = "i2c-bfin-twi",
 458         .id = 0,
 459         .num_resources = ARRAY_SIZE(bfin_twi0_resource),
 460         .resource = bfin_twi0_resource,
 461 };
 462 #endif
 463
 464 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 465 static struct platform_device bfin_sport0_uart_device = {
 466         .name = "bfin-sport-uart",
 467         .id = 0,
 468 };
 469
 470 static struct platform_device bfin_sport1_uart_device = {
 471         .name = "bfin-sport-uart",
 472         .id = 1,
 473 };
 474 #endif
 475
 476 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 477 static struct platform_device bfin_mii_bus = {
 478         .name = "bfin_mii_bus",
 479 };
 480
 481 static struct platform_device bfin_mac_device = {
 482         .name = "bfin_mac",
 483         .dev.platform_data = &bfin_mii_bus,
 484 };
 485 #endif
 486
 487 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 488 #define PATA_INT        IRQ_PF14
 489
 490 static struct pata_platform_info bfin_pata_platform_data = {
 491         .ioport_shift = 2,
 492         .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
 493 };
 494
 495 static struct resource bfin_pata_resources[] = {
 496         {
 497                 .start = 0x2030C000,
 498                 .end = 0x2030C01F,
 499                 .flags = IORESOURCE_MEM,
 500         },
 501         {
 502                 .start = 0x2030D018,
 503                 .end = 0x2030D01B,
 504                 .flags = IORESOURCE_MEM,
 505         },
 506         {
 507                 .start = PATA_INT,
 508                 .end = PATA_INT,
 509                 .flags = IORESOURCE_IRQ,
 510         },
 511 };
 512
 513 static struct platform_device bfin_pata_device = {
 514         .name = "pata_platform",
 515         .id = -1,
 516         .num_resources = ARRAY_SIZE(bfin_pata_resources),
 517         .resource = bfin_pata_resources,
 518         .dev = {
 519                 .platform_data = &bfin_pata_platform_data,
 520         }
 521 };
 522 #endif
 523
 524 static const unsigned int cclk_vlev_datasheet[] =
 525 {
 526         VRPAIR(VLEV_085, 250000000),
 527         VRPAIR(VLEV_090, 376000000),
 528         VRPAIR(VLEV_095, 426000000),
 529         VRPAIR(VLEV_100, 426000000),
 530         VRPAIR(VLEV_105, 476000000),
 531         VRPAIR(VLEV_110, 476000000),
 532         VRPAIR(VLEV_115, 476000000),
 533         VRPAIR(VLEV_120, 500000000),
 534         VRPAIR(VLEV_125, 533000000),
 535         VRPAIR(VLEV_130, 600000000),
 536 };
 537
 538 static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
 539         .tuple_tab = cclk_vlev_datasheet,
 540         .tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
 541         .vr_settling_time = 25 /* us */,
 542 };
 543
 544 static struct platform_device bfin_dpmc = {
 545         .name = "bfin dpmc",
 546         .dev = {
 547                 .platform_data = &bfin_dmpc_vreg_data,
 548         },
 549 };
 550
 551 static struct platform_device *cm_bf537_devices[] __initdata = {
 552
 553         &bfin_dpmc,
 554
 555 #if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE)
 556         &hitachi_fb_device,
 557 #endif
 558
 559 #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
 560         &rtc_device,
 561 #endif
 562
 563 #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
 564         &bfin_uart_device,
 565 #endif
 566
 567 #if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
 568 #ifdef CONFIG_BFIN_SIR0
 569         &bfin_sir0_device,
 570 #endif
 571 #ifdef CONFIG_BFIN_SIR1
 572         &bfin_sir1_device,
 573 #endif
 574 #endif
 575
 576 #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE)
 577         &i2c_bfin_twi_device,
 578 #endif
 579
 580 #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
 581         &bfin_sport0_uart_device,
 582         &bfin_sport1_uart_device,
 583 #endif
 584
 585 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 586         &isp1362_hcd_device,
 587 #endif
 588
 589 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
 590         &smc91x_device,
 591 #endif
 592
 593 #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
 594         &bfin_mii_bus,
 595         &bfin_mac_device,
 596 #endif
 597
 598 #if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE)
 599         &net2272_bfin_device,
 600 #endif
 601
 602 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 603         &bfin_spi0_device,
 604 #endif
 605
 606 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 607         &bfin_pata_device,
 608 #endif
 609
 610 #if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE)
 611         &cm_flash_device,
 612 #endif
 613
 614         &bfin_gpios_device,
 615 };
 616
 617 static int __init cm_bf537_init(void)
 618 {
 619         printk(KERN_INFO "%s(): registering device resources\n", __func__);
 620         platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices));
 621 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 622         spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 623 #endif
 624
 625 #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
 626         irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
 627 #endif
 628         return 0;
 629 }
 630
 631 arch_initcall(cm_bf537_init);
 632
 633 void bfin_get_ether_addr(char *addr)
 634 {
 635         random_ether_addr(addr);
 636         printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__);
 637 }
 638 EXPORT_SYMBOL(bfin_get_ether_addr);