Pull thermal into release branch
[linux-2.6] / arch / arm / mach-omap1 / board-innovator.c
1 /*
2  * linux/arch/arm/mach-omap1/board-innovator.c
3  *
4  * Board specific inits for OMAP-1510 and OMAP-1610 Innovator
5  *
6  * Copyright (C) 2001 RidgeRun, Inc.
7  * Author: Greg Lonnon <glonnon@ridgerun.com>
8  *
9  * Copyright (C) 2002 MontaVista Software, Inc.
10  *
11  * Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
12  * Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
13  *
14  * This program is free software; you can redistribute it and/or modify
15  * it under the terms of the GNU General Public License version 2 as
16  * published by the Free Software Foundation.
17  */
18
19 #include <linux/kernel.h>
20 #include <linux/init.h>
21 #include <linux/platform_device.h>
22 #include <linux/delay.h>
23 #include <linux/mtd/mtd.h>
24 #include <linux/mtd/partitions.h>
25 #include <linux/input.h>
26
27 #include <asm/hardware.h>
28 #include <asm/mach-types.h>
29 #include <asm/mach/arch.h>
30 #include <asm/mach/flash.h>
31 #include <asm/mach/map.h>
32
33 #include <asm/arch/mux.h>
34 #include <asm/arch/fpga.h>
35 #include <asm/arch/gpio.h>
36 #include <asm/arch/tc.h>
37 #include <asm/arch/usb.h>
38 #include <asm/arch/keypad.h>
39 #include <asm/arch/common.h>
40 #include <asm/arch/mcbsp.h>
41 #include <asm/arch/omap-alsa.h>
42
43 static int innovator_keymap[] = {
44         KEY(0, 0, KEY_F1),
45         KEY(0, 3, KEY_DOWN),
46         KEY(1, 1, KEY_F2),
47         KEY(1, 2, KEY_RIGHT),
48         KEY(2, 0, KEY_F3),
49         KEY(2, 1, KEY_F4),
50         KEY(2, 2, KEY_UP),
51         KEY(3, 2, KEY_ENTER),
52         KEY(3, 3, KEY_LEFT),
53         0
54 };
55
56 static struct mtd_partition innovator_partitions[] = {
57         /* bootloader (U-Boot, etc) in first sector */
58         {
59               .name             = "bootloader",
60               .offset           = 0,
61               .size             = SZ_128K,
62               .mask_flags       = MTD_WRITEABLE, /* force read-only */
63         },
64         /* bootloader params in the next sector */
65         {
66               .name             = "params",
67               .offset           = MTDPART_OFS_APPEND,
68               .size             = SZ_128K,
69               .mask_flags       = 0,
70         },
71         /* kernel */
72         {
73               .name             = "kernel",
74               .offset           = MTDPART_OFS_APPEND,
75               .size             = SZ_2M,
76               .mask_flags       = 0
77         },
78         /* rest of flash1 is a file system */
79         {
80               .name             = "rootfs",
81               .offset           = MTDPART_OFS_APPEND,
82               .size             = SZ_16M - SZ_2M - 2 * SZ_128K,
83               .mask_flags       = 0
84         },
85         /* file system */
86         {
87               .name             = "filesystem",
88               .offset           = MTDPART_OFS_APPEND,
89               .size             = MTDPART_SIZ_FULL,
90               .mask_flags       = 0
91         }
92 };
93
94 static struct flash_platform_data innovator_flash_data = {
95         .map_name       = "cfi_probe",
96         .width          = 2,
97         .parts          = innovator_partitions,
98         .nr_parts       = ARRAY_SIZE(innovator_partitions),
99 };
100
101 static struct resource innovator_flash_resource = {
102         .start          = OMAP_CS0_PHYS,
103         .end            = OMAP_CS0_PHYS + SZ_32M - 1,
104         .flags          = IORESOURCE_MEM,
105 };
106
107 static struct platform_device innovator_flash_device = {
108         .name           = "omapflash",
109         .id             = 0,
110         .dev            = {
111                 .platform_data  = &innovator_flash_data,
112         },
113         .num_resources  = 1,
114         .resource       = &innovator_flash_resource,
115 };
116
117 #define DEFAULT_BITPERSAMPLE 16
118
119 static struct omap_mcbsp_reg_cfg mcbsp_regs = {
120         .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
121         .spcr1 = RINTM(3) | RRST,
122         .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
123             RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
124         .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
125         .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
126             XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
127         .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
128         .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
129         .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
130         /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
131         .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
132 };
133
134 static struct omap_alsa_codec_config alsa_config = {
135         .name                   = "OMAP Innovator AIC23",
136         .mcbsp_regs_alsa        = &mcbsp_regs,
137         .codec_configure_dev    = NULL, // aic23_configure,
138         .codec_set_samplerate   = NULL, // aic23_set_samplerate,
139         .codec_clock_setup      = NULL, // aic23_clock_setup,
140         .codec_clock_on         = NULL, // aic23_clock_on,
141         .codec_clock_off        = NULL, // aic23_clock_off,
142         .get_default_samplerate = NULL, // aic23_get_default_samplerate,
143 };
144
145 static struct platform_device innovator_mcbsp1_device = {
146         .name   = "omap_alsa_mcbsp",
147         .id     = 1,
148         .dev = {
149                 .platform_data  = &alsa_config,
150         },
151 };
152
153 static struct resource innovator_kp_resources[] = {
154         [0] = {
155                 .start  = INT_KEYBOARD,
156                 .end    = INT_KEYBOARD,
157                 .flags  = IORESOURCE_IRQ,
158         },
159 };
160
161 static struct omap_kp_platform_data innovator_kp_data = {
162         .rows           = 8,
163         .cols           = 8,
164         .keymap         = innovator_keymap,
165         .keymapsize     = ARRAY_SIZE(innovator_keymap),
166         .delay          = 4,
167 };
168
169 static struct platform_device innovator_kp_device = {
170         .name           = "omap-keypad",
171         .id             = -1,
172         .dev            = {
173                 .platform_data = &innovator_kp_data,
174         },
175         .num_resources  = ARRAY_SIZE(innovator_kp_resources),
176         .resource       = innovator_kp_resources,
177 };
178
179
180 #ifdef CONFIG_ARCH_OMAP15XX
181
182 #include <linux/spi/spi.h>
183 #include <linux/spi/ads7846.h>
184
185
186 /* Only FPGA needs to be mapped here. All others are done with ioremap */
187 static struct map_desc innovator1510_io_desc[] __initdata = {
188         {
189                 .virtual        = OMAP1510_FPGA_BASE,
190                 .pfn            = __phys_to_pfn(OMAP1510_FPGA_START),
191                 .length         = OMAP1510_FPGA_SIZE,
192                 .type           = MT_DEVICE
193         }
194 };
195
196 static struct resource innovator1510_smc91x_resources[] = {
197         [0] = {
198                 .start  = OMAP1510_FPGA_ETHR_START,     /* Physical */
199                 .end    = OMAP1510_FPGA_ETHR_START + 0xf,
200                 .flags  = IORESOURCE_MEM,
201         },
202         [1] = {
203                 .start  = OMAP1510_INT_ETHER,
204                 .end    = OMAP1510_INT_ETHER,
205                 .flags  = IORESOURCE_IRQ,
206         },
207 };
208
209 static struct platform_device innovator1510_smc91x_device = {
210         .name           = "smc91x",
211         .id             = 0,
212         .num_resources  = ARRAY_SIZE(innovator1510_smc91x_resources),
213         .resource       = innovator1510_smc91x_resources,
214 };
215
216 static struct platform_device innovator1510_lcd_device = {
217         .name           = "lcd_inn1510",
218         .id             = -1,
219 };
220
221 static struct platform_device innovator1510_spi_device = {
222         .name           = "spi_inn1510",
223         .id             = -1,
224 };
225
226 static struct platform_device *innovator1510_devices[] __initdata = {
227         &innovator_flash_device,
228         &innovator1510_smc91x_device,
229         &innovator_mcbsp1_device,
230         &innovator_kp_device,
231         &innovator1510_lcd_device,
232         &innovator1510_spi_device,
233 };
234
235 static int innovator_get_pendown_state(void)
236 {
237         return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
238 }
239
240 static const struct ads7846_platform_data innovator1510_ts_info = {
241         .model                  = 7846,
242         .vref_delay_usecs       = 100,  /* internal, no capacitor */
243         .x_plate_ohms           = 419,
244         .y_plate_ohms           = 486,
245         .get_pendown_state      = innovator_get_pendown_state,
246 };
247
248 static struct spi_board_info __initdata innovator1510_boardinfo[] = { {
249         /* FPGA (bus "10") CS0 has an ads7846e */
250         .modalias               = "ads7846",
251         .platform_data          = &innovator1510_ts_info,
252         .irq                    = OMAP1510_INT_FPGA_TS,
253         .max_speed_hz           = 120000 /* max sample rate at 3V */
254                                         * 26 /* command + data + overhead */,
255         .bus_num                = 10,
256         .chip_select            = 0,
257 } };
258
259 #endif /* CONFIG_ARCH_OMAP15XX */
260
261 #ifdef CONFIG_ARCH_OMAP16XX
262
263 static struct resource innovator1610_smc91x_resources[] = {
264         [0] = {
265                 .start  = INNOVATOR1610_ETHR_START,             /* Physical */
266                 .end    = INNOVATOR1610_ETHR_START + 0xf,
267                 .flags  = IORESOURCE_MEM,
268         },
269         [1] = {
270                 .start  = OMAP_GPIO_IRQ(0),
271                 .end    = OMAP_GPIO_IRQ(0),
272                 .flags  = IORESOURCE_IRQ,
273         },
274 };
275
276 static struct platform_device innovator1610_smc91x_device = {
277         .name           = "smc91x",
278         .id             = 0,
279         .num_resources  = ARRAY_SIZE(innovator1610_smc91x_resources),
280         .resource       = innovator1610_smc91x_resources,
281 };
282
283 static struct platform_device innovator1610_lcd_device = {
284         .name           = "inn1610_lcd",
285         .id             = -1,
286 };
287
288 static struct platform_device *innovator1610_devices[] __initdata = {
289         &innovator_flash_device,
290         &innovator1610_smc91x_device,
291         &innovator_kp_device,
292         &innovator1610_lcd_device,
293 };
294
295 #endif /* CONFIG_ARCH_OMAP16XX */
296
297 static void __init innovator_init_smc91x(void)
298 {
299         if (cpu_is_omap1510()) {
300                 fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
301                            OMAP1510_FPGA_RST);
302                 udelay(750);
303         } else {
304                 if ((omap_request_gpio(0)) < 0) {
305                         printk("Error requesting gpio 0 for smc91x irq\n");
306                         return;
307                 }
308         }
309 }
310
311 static void __init innovator_init_irq(void)
312 {
313         omap1_init_common_hw();
314         omap_init_irq();
315         omap_gpio_init();
316 #ifdef CONFIG_ARCH_OMAP15XX
317         if (cpu_is_omap1510()) {
318                 omap1510_fpga_init_irq();
319         }
320 #endif
321         innovator_init_smc91x();
322 }
323
324 #ifdef CONFIG_ARCH_OMAP15XX
325 static struct omap_usb_config innovator1510_usb_config __initdata = {
326         /* for bundled non-standard host and peripheral cables */
327         .hmc_mode       = 4,
328
329         .register_host  = 1,
330         .pins[1]        = 6,
331         .pins[2]        = 6,            /* Conflicts with UART2 */
332
333         .register_dev   = 1,
334         .pins[0]        = 2,
335 };
336
337 static struct omap_lcd_config innovator1510_lcd_config __initdata = {
338         .ctrl_name      = "internal",
339 };
340 #endif
341
342 #ifdef CONFIG_ARCH_OMAP16XX
343 static struct omap_usb_config h2_usb_config __initdata = {
344         /* usb1 has a Mini-AB port and external isp1301 transceiver */
345         .otg            = 2,
346
347 #ifdef  CONFIG_USB_GADGET_OMAP
348         .hmc_mode       = 19,   // 0:host(off) 1:dev|otg 2:disabled
349         // .hmc_mode    = 21,   // 0:host(off) 1:dev(loopback) 2:host(loopback)
350 #elif   defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
351         /* NONSTANDARD CABLE NEEDED (B-to-Mini-B) */
352         .hmc_mode       = 20,   // 1:dev|otg(off) 1:host 2:disabled
353 #endif
354
355         .pins[1]        = 3,
356 };
357
358 static struct omap_lcd_config innovator1610_lcd_config __initdata = {
359         .ctrl_name      = "internal",
360 };
361 #endif
362
363 static struct omap_mmc_config innovator_mmc_config __initdata = {
364         .mmc [0] = {
365                 .enabled        = 1,
366                 .wire4          = 1,
367                 .wp_pin         = OMAP_MPUIO(3),
368                 .power_pin      = -1,   /* FPGA F3 UIO42 */
369                 .switch_pin     = -1,   /* FPGA F4 UIO43 */
370         },
371 };
372
373 static struct omap_uart_config innovator_uart_config __initdata = {
374         .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)),
375 };
376
377 static struct omap_board_config_kernel innovator_config[] = {
378         { OMAP_TAG_USB,         NULL },
379         { OMAP_TAG_LCD,         NULL },
380         { OMAP_TAG_MMC,         &innovator_mmc_config },
381         { OMAP_TAG_UART,        &innovator_uart_config },
382 };
383
384 static void __init innovator_init(void)
385 {
386 #ifdef CONFIG_ARCH_OMAP15XX
387         if (cpu_is_omap1510()) {
388                 platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
389                 spi_register_board_info(innovator1510_boardinfo,
390                                 ARRAY_SIZE(innovator1510_boardinfo));
391         }
392 #endif
393 #ifdef CONFIG_ARCH_OMAP16XX
394         if (!cpu_is_omap1510()) {
395                 platform_add_devices(innovator1610_devices, ARRAY_SIZE(innovator1610_devices));
396         }
397 #endif
398
399 #ifdef CONFIG_ARCH_OMAP15XX
400         if (cpu_is_omap1510()) {
401                 innovator_config[0].data = &innovator1510_usb_config;
402                 innovator_config[1].data = &innovator1510_lcd_config;
403         }
404 #endif
405 #ifdef CONFIG_ARCH_OMAP16XX
406         if (cpu_is_omap1610()) {
407                 innovator_config[0].data = &h2_usb_config;
408                 innovator_config[1].data = &innovator1610_lcd_config;
409         }
410 #endif
411         omap_board_config = innovator_config;
412         omap_board_config_size = ARRAY_SIZE(innovator_config);
413         omap_serial_init();
414 }
415
416 static void __init innovator_map_io(void)
417 {
418         omap1_map_common_io();
419
420 #ifdef CONFIG_ARCH_OMAP15XX
421         if (cpu_is_omap1510()) {
422                 iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
423                 udelay(10);     /* Delay needed for FPGA */
424
425                 /* Dump the Innovator FPGA rev early - useful info for support. */
426                 printk("Innovator FPGA Rev %d.%d Board Rev %d\n",
427                        fpga_read(OMAP1510_FPGA_REV_HIGH),
428                        fpga_read(OMAP1510_FPGA_REV_LOW),
429                        fpga_read(OMAP1510_FPGA_BOARD_REV));
430         }
431 #endif
432 }
433
434 MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
435         /* Maintainer: MontaVista Software, Inc. */
436         .phys_io        = 0xfff00000,
437         .io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
438         .boot_params    = 0x10000100,
439         .map_io         = innovator_map_io,
440         .init_irq       = innovator_init_irq,
441         .init_machine   = innovator_init,
442         .timer          = &omap_timer,
443 MACHINE_END