[SPARC64]: Fix 2 bugs in huge page support.
[linux-2.6] / arch / arm / mach-omap2 / serial.c
1 /*
2  * arch/arm/mach-omap/omap2/serial.c
3  *
4  * OMAP2 serial support.
5  *
6  * Copyright (C) 2005 Nokia Corporation
7  * Author: Paul Mundt <paul.mundt@nokia.com>
8  *
9  * Based off of arch/arm/mach-omap/omap1/serial.c
10  *
11  * This file is subject to the terms and conditions of the GNU General Public
12  * License. See the file "COPYING" in the main directory of this archive
13  * for more details.
14  */
15 #include <linux/kernel.h>
16 #include <linux/init.h>
17 #include <linux/serial_8250.h>
18 #include <linux/serial_reg.h>
19 #include <linux/clk.h>
20
21 #include <asm/io.h>
22
23 #include <asm/arch/common.h>
24 #include <asm/arch/board.h>
25
26 static struct clk * uart1_ick = NULL;
27 static struct clk * uart1_fck = NULL;
28 static struct clk * uart2_ick = NULL;
29 static struct clk * uart2_fck = NULL;
30 static struct clk * uart3_ick = NULL;
31 static struct clk * uart3_fck = NULL;
32
33 static struct plat_serial8250_port serial_platform_data[] = {
34         {
35                 .membase        = (char *)IO_ADDRESS(OMAP_UART1_BASE),
36                 .mapbase        = (unsigned long)OMAP_UART1_BASE,
37                 .irq            = 72,
38                 .flags          = UPF_BOOT_AUTOCONF,
39                 .iotype         = UPIO_MEM,
40                 .regshift       = 2,
41                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
42         }, {
43                 .membase        = (char *)IO_ADDRESS(OMAP_UART2_BASE),
44                 .mapbase        = (unsigned long)OMAP_UART2_BASE,
45                 .irq            = 73,
46                 .flags          = UPF_BOOT_AUTOCONF,
47                 .iotype         = UPIO_MEM,
48                 .regshift       = 2,
49                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
50         }, {
51                 .membase        = (char *)IO_ADDRESS(OMAP_UART3_BASE),
52                 .mapbase        = (unsigned long)OMAP_UART3_BASE,
53                 .irq            = 74,
54                 .flags          = UPF_BOOT_AUTOCONF,
55                 .iotype         = UPIO_MEM,
56                 .regshift       = 2,
57                 .uartclk        = OMAP16XX_BASE_BAUD * 16,
58         }, {
59                 .flags          = 0
60         }
61 };
62
63 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
64                                            int offset)
65 {
66         offset <<= up->regshift;
67         return (unsigned int)__raw_readb(up->membase + offset);
68 }
69
70 static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
71                                     int value)
72 {
73         offset <<= p->regshift;
74         __raw_writeb(value, (unsigned long)(p->membase + offset));
75 }
76
77 /*
78  * Internal UARTs need to be initialized for the 8250 autoconfig to work
79  * properly. Note that the TX watermark initialization may not be needed
80  * once the 8250.c watermark handling code is merged.
81  */
82 static inline void __init omap_serial_reset(struct plat_serial8250_port *p)
83 {
84         serial_write_reg(p, UART_OMAP_MDR1, 0x07);
85         serial_write_reg(p, UART_OMAP_SCR, 0x08);
86         serial_write_reg(p, UART_OMAP_MDR1, 0x00);
87         serial_write_reg(p, UART_OMAP_SYSC, 0x01);
88 }
89
90 void __init omap_serial_init()
91 {
92         int i;
93         const struct omap_uart_config *info;
94
95         /*
96          * Make sure the serial ports are muxed on at this point.
97          * You have to mux them off in device drivers later on
98          * if not needed.
99          */
100
101         info = omap_get_config(OMAP_TAG_UART,
102                                struct omap_uart_config);
103
104         if (info == NULL)
105                 return;
106
107         for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
108                 struct plat_serial8250_port *p = serial_platform_data + i;
109
110                 if (!(info->enabled_uarts & (1 << i))) {
111                         p->membase = 0;
112                         p->mapbase = 0;
113                         continue;
114                 }
115
116                 switch (i) {
117                 case 0:
118                         uart1_ick = clk_get(NULL, "uart1_ick");
119                         if (IS_ERR(uart1_ick))
120                                 printk("Could not get uart1_ick\n");
121                         else {
122                                 clk_enable(uart1_ick);
123                         }
124
125                         uart1_fck = clk_get(NULL, "uart1_fck");
126                         if (IS_ERR(uart1_fck))
127                                 printk("Could not get uart1_fck\n");
128                         else {
129                                 clk_enable(uart1_fck);
130                         }
131                         break;
132                 case 1:
133                         uart2_ick = clk_get(NULL, "uart2_ick");
134                         if (IS_ERR(uart2_ick))
135                                 printk("Could not get uart2_ick\n");
136                         else {
137                                 clk_enable(uart2_ick);
138                         }
139
140                         uart2_fck = clk_get(NULL, "uart2_fck");
141                         if (IS_ERR(uart2_fck))
142                                 printk("Could not get uart2_fck\n");
143                         else {
144                                 clk_enable(uart2_fck);
145                         }
146                         break;
147                 case 2:
148                         uart3_ick = clk_get(NULL, "uart3_ick");
149                         if (IS_ERR(uart3_ick))
150                                 printk("Could not get uart3_ick\n");
151                         else {
152                                 clk_enable(uart3_ick);
153                         }
154
155                         uart3_fck = clk_get(NULL, "uart3_fck");
156                         if (IS_ERR(uart3_fck))
157                                 printk("Could not get uart3_fck\n");
158                         else {
159                                 clk_enable(uart3_fck);
160                         }
161                         break;
162                 }
163
164                 omap_serial_reset(p);
165         }
166 }
167
168 static struct platform_device serial_device = {
169         .name                   = "serial8250",
170         .id                     = 0,
171         .dev                    = {
172                 .platform_data  = serial_platform_data,
173         },
174 };
175
176 static int __init omap_init(void)
177 {
178         return platform_device_register(&serial_device);
179 }
180 arch_initcall(omap_init);