git.oblomov.eu Git - linux-2.6/blob - drivers/net/phy/phy_device.c

   1 /*
   2  * drivers/net/phy/phy_device.c
   3  *
   4  * Framework for finding and configuring PHYs.
   5  * Also contains generic PHY driver
   6  *
   7  * Author: Andy Fleming
   8  *
   9  * Copyright (c) 2004 Freescale Semiconductor, Inc.
  10  *
  11  * This program is free software; you can redistribute  it and/or modify it
  12  * under  the terms of  the GNU General  Public License as published by the
  13  * Free Software Foundation;  either version 2 of the  License, or (at your
  14  * option) any later version.
  15  *
  16  */
  17 #include <linux/kernel.h>
  18 #include <linux/sched.h>
  19 #include <linux/string.h>
  20 #include <linux/errno.h>
  21 #include <linux/unistd.h>
  22 #include <linux/slab.h>
  23 #include <linux/interrupt.h>
  24 #include <linux/init.h>
  25 #include <linux/delay.h>
  26 #include <linux/netdevice.h>
  27 #include <linux/etherdevice.h>
  28 #include <linux/skbuff.h>
  29 #include <linux/spinlock.h>
  30 #include <linux/mm.h>
  31 #include <linux/module.h>
  32 #include <linux/mii.h>
  33 #include <linux/ethtool.h>
  34 #include <linux/phy.h>
  35
  36 #include <asm/io.h>
  37 #include <asm/irq.h>
  38 #include <asm/uaccess.h>
  39
  40 MODULE_DESCRIPTION("PHY library");
  41 MODULE_AUTHOR("Andy Fleming");
  42 MODULE_LICENSE("GPL");
  43
  44 static struct phy_driver genphy_driver;
  45 extern int mdio_bus_init(void);
  46 extern void mdio_bus_exit(void);
  47
  48 struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
  49 {
  50         struct phy_device *dev;
  51         /* We allocate the device, and initialize the
  52          * default values */
  53         dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
  54
  55         if (NULL == dev)
  56                 return (struct phy_device*) PTR_ERR((void*)-ENOMEM);
  57
  58         dev->speed = 0;
  59         dev->duplex = -1;
  60         dev->pause = dev->asym_pause = 0;
  61         dev->link = 1;
  62
  63         dev->autoneg = AUTONEG_ENABLE;
  64
  65         dev->addr = addr;
  66         dev->phy_id = phy_id;
  67         dev->bus = bus;
  68
  69         dev->state = PHY_DOWN;
  70
  71         spin_lock_init(&dev->lock);
  72
  73         return dev;
  74 }
  75 EXPORT_SYMBOL(phy_device_create);
  76
  77 /* get_phy_device
  78  *
  79  * description: Reads the ID registers of the PHY at addr on the
  80  *   bus, then allocates and returns the phy_device to
  81  *   represent it.
  82  */
  83 struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
  84 {
  85         int phy_reg;
  86         u32 phy_id;
  87         struct phy_device *dev = NULL;
  88
  89         /* Grab the bits from PHYIR1, and put them
  90          * in the upper half */
  91         phy_reg = bus->read(bus, addr, MII_PHYSID1);
  92
  93         if (phy_reg < 0)
  94                 return ERR_PTR(phy_reg);
  95
  96         phy_id = (phy_reg & 0xffff) << 16;
  97
  98         /* Grab the bits from PHYIR2, and put them in the lower half */
  99         phy_reg = bus->read(bus, addr, MII_PHYSID2);
 100
 101         if (phy_reg < 0)
 102                 return ERR_PTR(phy_reg);
 103
 104         phy_id |= (phy_reg & 0xffff);
 105
 106         /* If the phy_id is all Fs, there is no device there */
 107         if (0xffffffff == phy_id)
 108                 return NULL;
 109
 110         dev = phy_device_create(bus, addr, phy_id);
 111
 112         return dev;
 113 }
 114
 115 /* phy_prepare_link:
 116  *
 117  * description: Tells the PHY infrastructure to handle the
 118  *   gory details on monitoring link status (whether through
 119  *   polling or an interrupt), and to call back to the
 120  *   connected device driver when the link status changes.
 121  *   If you want to monitor your own link state, don't call
 122  *   this function */
 123 void phy_prepare_link(struct phy_device *phydev,
 124                 void (*handler)(struct net_device *))
 125 {
 126         phydev->adjust_link = handler;
 127 }
 128
 129 /* phy_connect:
 130  *
 131  * description: Convenience function for connecting ethernet
 132  *   devices to PHY devices.  The default behavior is for
 133  *   the PHY infrastructure to handle everything, and only notify
 134  *   the connected driver when the link status changes.  If you
 135  *   don't want, or can't use the provided functionality, you may
 136  *   choose to call only the subset of functions which provide
 137  *   the desired functionality.
 138  */
 139 struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
 140                 void (*handler)(struct net_device *), u32 flags)
 141 {
 142         struct phy_device *phydev;
 143
 144         phydev = phy_attach(dev, phy_id, flags);
 145
 146         if (IS_ERR(phydev))
 147                 return phydev;
 148
 149         phy_prepare_link(phydev, handler);
 150
 151         phy_start_machine(phydev, NULL);
 152
 153         if (phydev->irq > 0)
 154                 phy_start_interrupts(phydev);
 155
 156         return phydev;
 157 }
 158 EXPORT_SYMBOL(phy_connect);
 159
 160 void phy_disconnect(struct phy_device *phydev)
 161 {
 162         if (phydev->irq > 0)
 163                 phy_stop_interrupts(phydev);
 164
 165         phy_stop_machine(phydev);
 166
 167         phydev->adjust_link = NULL;
 168
 169         phy_detach(phydev);
 170 }
 171 EXPORT_SYMBOL(phy_disconnect);
 172
 173 /* phy_attach:
 174  *
 175  *   description: Called by drivers to attach to a particular PHY
 176  *     device. The phy_device is found, and properly hooked up
 177  *     to the phy_driver.  If no driver is attached, then the
 178  *     genphy_driver is used.  The phy_device is given a ptr to
 179  *     the attaching device, and given a callback for link status
 180  *     change.  The phy_device is returned to the attaching
 181  *     driver.
 182  */
 183 static int phy_compare_id(struct device *dev, void *data)
 184 {
 185         return strcmp((char *)data, dev->bus_id) ? 0 : 1;
 186 }
 187
 188 struct phy_device *phy_attach(struct net_device *dev,
 189                 const char *phy_id, u32 flags)
 190 {
 191         struct bus_type *bus = &mdio_bus_type;
 192         struct phy_device *phydev;
 193         struct device *d;
 194
 195         /* Search the list of PHY devices on the mdio bus for the
 196          * PHY with the requested name */
 197         d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
 198
 199         if (d) {
 200                 phydev = to_phy_device(d);
 201         } else {
 202                 printk(KERN_ERR "%s not found\n", phy_id);
 203                 return ERR_PTR(-ENODEV);
 204         }
 205
 206         /* Assume that if there is no driver, that it doesn't
 207          * exist, and we should use the genphy driver. */
 208         if (NULL == d->driver) {
 209                 int err;
 210                 down_write(&d->bus->subsys.rwsem);
 211                 d->driver = &genphy_driver.driver;
 212
 213                 err = d->driver->probe(d);
 214
 215                 if (err < 0)
 216                         return ERR_PTR(err);
 217
 218                 device_bind_driver(d);
 219                 up_write(&d->bus->subsys.rwsem);
 220         }
 221
 222         if (phydev->attached_dev) {
 223                 printk(KERN_ERR "%s: %s already attached\n",
 224                                 dev->name, phy_id);
 225                 return ERR_PTR(-EBUSY);
 226         }
 227
 228         phydev->attached_dev = dev;
 229
 230         phydev->dev_flags = flags;
 231
 232         return phydev;
 233 }
 234 EXPORT_SYMBOL(phy_attach);
 235
 236 void phy_detach(struct phy_device *phydev)
 237 {
 238         phydev->attached_dev = NULL;
 239
 240         /* If the device had no specific driver before (i.e. - it
 241          * was using the generic driver), we unbind the device
 242          * from the generic driver so that there's a chance a
 243          * real driver could be loaded */
 244         if (phydev->dev.driver == &genphy_driver.driver) {
 245                 down_write(&phydev->dev.bus->subsys.rwsem);
 246                 device_release_driver(&phydev->dev);
 247                 up_write(&phydev->dev.bus->subsys.rwsem);
 248         }
 249 }
 250 EXPORT_SYMBOL(phy_detach);
 251
 252
 253 /* Generic PHY support and helper functions */
 254
 255 /* genphy_config_advert
 256  *
 257  * description: Writes MII_ADVERTISE with the appropriate values,
 258  *   after sanitizing the values to make sure we only advertise
 259  *   what is supported
 260  */
 261 int genphy_config_advert(struct phy_device *phydev)
 262 {
 263         u32 advertise;
 264         int adv;
 265         int err;
 266
 267         /* Only allow advertising what
 268          * this PHY supports */
 269         phydev->advertising &= phydev->supported;
 270         advertise = phydev->advertising;
 271
 272         /* Setup standard advertisement */
 273         adv = phy_read(phydev, MII_ADVERTISE);
 274
 275         if (adv < 0)
 276                 return adv;
 277
 278         adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
 279                  ADVERTISE_PAUSE_ASYM);
 280         if (advertise & ADVERTISED_10baseT_Half)
 281                 adv |= ADVERTISE_10HALF;
 282         if (advertise & ADVERTISED_10baseT_Full)
 283                 adv |= ADVERTISE_10FULL;
 284         if (advertise & ADVERTISED_100baseT_Half)
 285                 adv |= ADVERTISE_100HALF;
 286         if (advertise & ADVERTISED_100baseT_Full)
 287                 adv |= ADVERTISE_100FULL;
 288         if (advertise & ADVERTISED_Pause)
 289                 adv |= ADVERTISE_PAUSE_CAP;
 290         if (advertise & ADVERTISED_Asym_Pause)
 291                 adv |= ADVERTISE_PAUSE_ASYM;
 292
 293         err = phy_write(phydev, MII_ADVERTISE, adv);
 294
 295         if (err < 0)
 296                 return err;
 297
 298         /* Configure gigabit if it's supported */
 299         if (phydev->supported & (SUPPORTED_1000baseT_Half |
 300                                 SUPPORTED_1000baseT_Full)) {
 301                 adv = phy_read(phydev, MII_CTRL1000);
 302
 303                 if (adv < 0)
 304                         return adv;
 305
 306                 adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
 307                 if (advertise & SUPPORTED_1000baseT_Half)
 308                         adv |= ADVERTISE_1000HALF;
 309                 if (advertise & SUPPORTED_1000baseT_Full)
 310                         adv |= ADVERTISE_1000FULL;
 311                 err = phy_write(phydev, MII_CTRL1000, adv);
 312
 313                 if (err < 0)
 314                         return err;
 315         }
 316
 317         return adv;
 318 }
 319 EXPORT_SYMBOL(genphy_config_advert);
 320
 321 /* genphy_setup_forced
 322  *
 323  * description: Configures MII_BMCR to force speed/duplex
 324  *   to the values in phydev. Assumes that the values are valid.
 325  *   Please see phy_sanitize_settings() */
 326 int genphy_setup_forced(struct phy_device *phydev)
 327 {
 328         int ctl = BMCR_RESET;
 329
 330         phydev->pause = phydev->asym_pause = 0;
 331
 332         if (SPEED_1000 == phydev->speed)
 333                 ctl |= BMCR_SPEED1000;
 334         else if (SPEED_100 == phydev->speed)
 335                 ctl |= BMCR_SPEED100;
 336
 337         if (DUPLEX_FULL == phydev->duplex)
 338                 ctl |= BMCR_FULLDPLX;
 339
 340         ctl = phy_write(phydev, MII_BMCR, ctl);
 341
 342         if (ctl < 0)
 343                 return ctl;
 344
 345         /* We just reset the device, so we'd better configure any
 346          * settings the PHY requires to operate */
 347         if (phydev->drv->config_init)
 348                 ctl = phydev->drv->config_init(phydev);
 349
 350         return ctl;
 351 }
 352
 353
 354 /* Enable and Restart Autonegotiation */
 355 int genphy_restart_aneg(struct phy_device *phydev)
 356 {
 357         int ctl;
 358
 359         ctl = phy_read(phydev, MII_BMCR);
 360
 361         if (ctl < 0)
 362                 return ctl;
 363
 364         ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
 365
 366         /* Don't isolate the PHY if we're negotiating */
 367         ctl &= ~(BMCR_ISOLATE);
 368
 369         ctl = phy_write(phydev, MII_BMCR, ctl);
 370
 371         return ctl;
 372 }
 373
 374
 375 /* genphy_config_aneg
 376  *
 377  * description: If auto-negotiation is enabled, we configure the
 378  *   advertising, and then restart auto-negotiation.  If it is not
 379  *   enabled, then we write the BMCR
 380  */
 381 int genphy_config_aneg(struct phy_device *phydev)
 382 {
 383         int err = 0;
 384
 385         if (AUTONEG_ENABLE == phydev->autoneg) {
 386                 err = genphy_config_advert(phydev);
 387
 388                 if (err < 0)
 389                         return err;
 390
 391                 err = genphy_restart_aneg(phydev);
 392         } else
 393                 err = genphy_setup_forced(phydev);
 394
 395         return err;
 396 }
 397 EXPORT_SYMBOL(genphy_config_aneg);
 398
 399 /* genphy_update_link
 400  *
 401  * description: Update the value in phydev->link to reflect the
 402  *   current link value.  In order to do this, we need to read
 403  *   the status register twice, keeping the second value
 404  */
 405 int genphy_update_link(struct phy_device *phydev)
 406 {
 407         int status;
 408
 409         /* Do a fake read */
 410         status = phy_read(phydev, MII_BMSR);
 411
 412         if (status < 0)
 413                 return status;
 414
 415         /* Read link and autonegotiation status */
 416         status = phy_read(phydev, MII_BMSR);
 417
 418         if (status < 0)
 419                 return status;
 420
 421         if ((status & BMSR_LSTATUS) == 0)
 422                 phydev->link = 0;
 423         else
 424                 phydev->link = 1;
 425
 426         return 0;
 427 }
 428
 429 /* genphy_read_status
 430  *
 431  * description: Check the link, then figure out the current state
 432  *   by comparing what we advertise with what the link partner
 433  *   advertises.  Start by checking the gigabit possibilities,
 434  *   then move on to 10/100.
 435  */
 436 int genphy_read_status(struct phy_device *phydev)
 437 {
 438         int adv;
 439         int err;
 440         int lpa;
 441         int lpagb = 0;
 442
 443         /* Update the link, but return if there
 444          * was an error */
 445         err = genphy_update_link(phydev);
 446         if (err)
 447                 return err;
 448
 449         if (AUTONEG_ENABLE == phydev->autoneg) {
 450                 if (phydev->supported & (SUPPORTED_1000baseT_Half
 451                                         | SUPPORTED_1000baseT_Full)) {
 452                         lpagb = phy_read(phydev, MII_STAT1000);
 453
 454                         if (lpagb < 0)
 455                                 return lpagb;
 456
 457                         adv = phy_read(phydev, MII_CTRL1000);
 458
 459                         if (adv < 0)
 460                                 return adv;
 461
 462                         lpagb &= adv << 2;
 463                 }
 464
 465                 lpa = phy_read(phydev, MII_LPA);
 466
 467                 if (lpa < 0)
 468                         return lpa;
 469
 470                 adv = phy_read(phydev, MII_ADVERTISE);
 471
 472                 if (adv < 0)
 473                         return adv;
 474
 475                 lpa &= adv;
 476
 477                 phydev->speed = SPEED_10;
 478                 phydev->duplex = DUPLEX_HALF;
 479                 phydev->pause = phydev->asym_pause = 0;
 480
 481                 if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
 482                         phydev->speed = SPEED_1000;
 483
 484                         if (lpagb & LPA_1000FULL)
 485                                 phydev->duplex = DUPLEX_FULL;
 486                 } else if (lpa & (LPA_100FULL | LPA_100HALF)) {
 487                         phydev->speed = SPEED_100;
 488
 489                         if (lpa & LPA_100FULL)
 490                                 phydev->duplex = DUPLEX_FULL;
 491                 } else
 492                         if (lpa & LPA_10FULL)
 493                                 phydev->duplex = DUPLEX_FULL;
 494
 495                 if (phydev->duplex == DUPLEX_FULL){
 496                         phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
 497                         phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
 498                 }
 499         } else {
 500                 int bmcr = phy_read(phydev, MII_BMCR);
 501                 if (bmcr < 0)
 502                         return bmcr;
 503
 504                 if (bmcr & BMCR_FULLDPLX)
 505                         phydev->duplex = DUPLEX_FULL;
 506                 else
 507                         phydev->duplex = DUPLEX_HALF;
 508
 509                 if (bmcr & BMCR_SPEED1000)
 510                         phydev->speed = SPEED_1000;
 511                 else if (bmcr & BMCR_SPEED100)
 512                         phydev->speed = SPEED_100;
 513                 else
 514                         phydev->speed = SPEED_10;
 515
 516                 phydev->pause = phydev->asym_pause = 0;
 517         }
 518
 519         return 0;
 520 }
 521 EXPORT_SYMBOL(genphy_read_status);
 522
 523 static int genphy_config_init(struct phy_device *phydev)
 524 {
 525         u32 val;
 526         u32 features;
 527
 528         /* For now, I'll claim that the generic driver supports
 529          * all possible port types */
 530         features = (SUPPORTED_TP | SUPPORTED_MII
 531                         | SUPPORTED_AUI | SUPPORTED_FIBRE |
 532                         SUPPORTED_BNC);
 533
 534         /* Do we support autonegotiation? */
 535         val = phy_read(phydev, MII_BMSR);
 536
 537         if (val < 0)
 538                 return val;
 539
 540         if (val & BMSR_ANEGCAPABLE)
 541                 features |= SUPPORTED_Autoneg;
 542
 543         if (val & BMSR_100FULL)
 544                 features |= SUPPORTED_100baseT_Full;
 545         if (val & BMSR_100HALF)
 546                 features |= SUPPORTED_100baseT_Half;
 547         if (val & BMSR_10FULL)
 548                 features |= SUPPORTED_10baseT_Full;
 549         if (val & BMSR_10HALF)
 550                 features |= SUPPORTED_10baseT_Half;
 551
 552         if (val & BMSR_ESTATEN) {
 553                 val = phy_read(phydev, MII_ESTATUS);
 554
 555                 if (val < 0)
 556                         return val;
 557
 558                 if (val & ESTATUS_1000_TFULL)
 559                         features |= SUPPORTED_1000baseT_Full;
 560                 if (val & ESTATUS_1000_THALF)
 561                         features |= SUPPORTED_1000baseT_Half;
 562         }
 563
 564         phydev->supported = features;
 565         phydev->advertising = features;
 566
 567         return 0;
 568 }
 569
 570
 571 /* phy_probe
 572  *
 573  * description: Take care of setting up the phy_device structure,
 574  *   set the state to READY (the driver's init function should
 575  *   set it to STARTING if needed).
 576  */
 577 static int phy_probe(struct device *dev)
 578 {
 579         struct phy_device *phydev;
 580         struct phy_driver *phydrv;
 581         struct device_driver *drv;
 582         int err = 0;
 583
 584         phydev = to_phy_device(dev);
 585
 586         /* Make sure the driver is held.
 587          * XXX -- Is this correct? */
 588         drv = get_driver(phydev->dev.driver);
 589         phydrv = to_phy_driver(drv);
 590         phydev->drv = phydrv;
 591
 592         /* Disable the interrupt if the PHY doesn't support it */
 593         if (!(phydrv->flags & PHY_HAS_INTERRUPT))
 594                 phydev->irq = PHY_POLL;
 595
 596         spin_lock(&phydev->lock);
 597
 598         /* Start out supporting everything. Eventually,
 599          * a controller will attach, and may modify one
 600          * or both of these values */
 601         phydev->supported = phydrv->features;
 602         phydev->advertising = phydrv->features;
 603
 604         /* Set the state to READY by default */
 605         phydev->state = PHY_READY;
 606
 607         if (phydev->drv->probe)
 608                 err = phydev->drv->probe(phydev);
 609
 610         spin_unlock(&phydev->lock);
 611
 612         if (err < 0)
 613                 return err;
 614
 615         if (phydev->drv->config_init)
 616                 err = phydev->drv->config_init(phydev);
 617
 618         return err;
 619 }
 620
 621 static int phy_remove(struct device *dev)
 622 {
 623         struct phy_device *phydev;
 624
 625         phydev = to_phy_device(dev);
 626
 627         spin_lock(&phydev->lock);
 628         phydev->state = PHY_DOWN;
 629         spin_unlock(&phydev->lock);
 630
 631         if (phydev->drv->remove)
 632                 phydev->drv->remove(phydev);
 633
 634         put_driver(dev->driver);
 635         phydev->drv = NULL;
 636
 637         return 0;
 638 }
 639
 640 int phy_driver_register(struct phy_driver *new_driver)
 641 {
 642         int retval;
 643
 644         memset(&new_driver->driver, 0, sizeof(new_driver->driver));
 645         new_driver->driver.name = new_driver->name;
 646         new_driver->driver.bus = &mdio_bus_type;
 647         new_driver->driver.probe = phy_probe;
 648         new_driver->driver.remove = phy_remove;
 649
 650         retval = driver_register(&new_driver->driver);
 651
 652         if (retval) {
 653                 printk(KERN_ERR "%s: Error %d in registering driver\n",
 654                                 new_driver->name, retval);
 655
 656                 return retval;
 657         }
 658
 659         pr_info("%s: Registered new driver\n", new_driver->name);
 660
 661         return 0;
 662 }
 663 EXPORT_SYMBOL(phy_driver_register);
 664
 665 void phy_driver_unregister(struct phy_driver *drv)
 666 {
 667         driver_unregister(&drv->driver);
 668 }
 669 EXPORT_SYMBOL(phy_driver_unregister);
 670
 671 static struct phy_driver genphy_driver = {
 672         .phy_id         = 0xffffffff,
 673         .phy_id_mask    = 0xffffffff,
 674         .name           = "Generic PHY",
 675         .config_init    = genphy_config_init,
 676         .features       = 0,
 677         .config_aneg    = genphy_config_aneg,
 678         .read_status    = genphy_read_status,
 679         .driver         = {.owner= THIS_MODULE, },
 680 };
 681
 682 static int __init phy_init(void)
 683 {
 684         int rc;
 685
 686         rc = mdio_bus_init();
 687         if (rc)
 688                 return rc;
 689
 690         rc = phy_driver_register(&genphy_driver);
 691         if (rc)
 692                 mdio_bus_exit();
 693
 694         return rc;
 695 }
 696
 697 static void __exit phy_exit(void)
 698 {
 699         phy_driver_unregister(&genphy_driver);
 700         mdio_bus_exit();
 701 }
 702
 703 subsys_initcall(phy_init);
 704 module_exit(phy_exit);