2 Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic device routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
31 #include "rt2x00dump.h"
34 * Link tuning handlers
36 void rt2x00lib_reset_link_tuner(struct rt2x00_dev *rt2x00dev)
38 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
42 * Reset link information.
43 * Both the currently active vgc level as well as
44 * the link tuner counter should be reset. Resetting
45 * the counter is important for devices where the
46 * device should only perform link tuning during the
47 * first minute after being enabled.
49 rt2x00dev->link.count = 0;
50 rt2x00dev->link.vgc_level = 0;
53 * Reset the link tuner.
55 rt2x00dev->ops->lib->reset_tuner(rt2x00dev);
58 static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev)
61 * Clear all (possibly) pre-existing quality statistics.
63 memset(&rt2x00dev->link.qual, 0, sizeof(rt2x00dev->link.qual));
66 * The RX and TX percentage should start at 50%
67 * this will assure we will get at least get some
68 * decent value when the link tuner starts.
69 * The value will be dropped and overwritten with
70 * the correct (measured )value anyway during the
71 * first run of the link tuner.
73 rt2x00dev->link.qual.rx_percentage = 50;
74 rt2x00dev->link.qual.tx_percentage = 50;
76 rt2x00lib_reset_link_tuner(rt2x00dev);
78 queue_delayed_work(rt2x00dev->hw->workqueue,
79 &rt2x00dev->link.work, LINK_TUNE_INTERVAL);
82 static void rt2x00lib_stop_link_tuner(struct rt2x00_dev *rt2x00dev)
84 cancel_delayed_work_sync(&rt2x00dev->link.work);
88 * Radio control handlers.
90 int rt2x00lib_enable_radio(struct rt2x00_dev *rt2x00dev)
95 * Don't enable the radio twice.
96 * And check if the hardware button has been disabled.
98 if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags) ||
99 test_bit(DEVICE_DISABLED_RADIO_HW, &rt2x00dev->flags))
103 * Initialize all data queues.
105 rt2x00queue_init_rx(rt2x00dev);
106 rt2x00queue_init_tx(rt2x00dev);
111 status = rt2x00dev->ops->lib->set_device_state(rt2x00dev,
116 __set_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags);
121 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
124 * Start the TX queues.
126 ieee80211_start_queues(rt2x00dev->hw);
131 void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev)
133 if (!__test_and_clear_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
137 * Stop all scheduled work.
139 if (work_pending(&rt2x00dev->intf_work))
140 cancel_work_sync(&rt2x00dev->intf_work);
141 if (work_pending(&rt2x00dev->filter_work))
142 cancel_work_sync(&rt2x00dev->filter_work);
145 * Stop the TX queues.
147 ieee80211_stop_queues(rt2x00dev->hw);
152 rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
157 rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_RADIO_OFF);
160 void rt2x00lib_toggle_rx(struct rt2x00_dev *rt2x00dev, enum dev_state state)
163 * When we are disabling the RX, we should also stop the link tuner.
165 if (state == STATE_RADIO_RX_OFF)
166 rt2x00lib_stop_link_tuner(rt2x00dev);
168 rt2x00dev->ops->lib->set_device_state(rt2x00dev, state);
171 * When we are enabling the RX, we should also start the link tuner.
173 if (state == STATE_RADIO_RX_ON &&
174 (rt2x00dev->intf_ap_count || rt2x00dev->intf_sta_count))
175 rt2x00lib_start_link_tuner(rt2x00dev);
178 static void rt2x00lib_evaluate_antenna_sample(struct rt2x00_dev *rt2x00dev)
180 enum antenna rx = rt2x00dev->link.ant.active.rx;
181 enum antenna tx = rt2x00dev->link.ant.active.tx;
183 rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_A);
185 rt2x00_get_link_ant_rssi_history(&rt2x00dev->link, ANTENNA_B);
188 * We are done sampling. Now we should evaluate the results.
190 rt2x00dev->link.ant.flags &= ~ANTENNA_MODE_SAMPLE;
193 * During the last period we have sampled the RSSI
194 * from both antenna's. It now is time to determine
195 * which antenna demonstrated the best performance.
196 * When we are already on the antenna with the best
197 * performance, then there really is nothing for us
200 if (sample_a == sample_b)
203 if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
204 rx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
206 if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
207 tx = (sample_a > sample_b) ? ANTENNA_A : ANTENNA_B;
209 rt2x00lib_config_antenna(rt2x00dev, rx, tx);
212 static void rt2x00lib_evaluate_antenna_eval(struct rt2x00_dev *rt2x00dev)
214 enum antenna rx = rt2x00dev->link.ant.active.rx;
215 enum antenna tx = rt2x00dev->link.ant.active.tx;
216 int rssi_curr = rt2x00_get_link_ant_rssi(&rt2x00dev->link);
217 int rssi_old = rt2x00_update_ant_rssi(&rt2x00dev->link, rssi_curr);
220 * Legacy driver indicates that we should swap antenna's
221 * when the difference in RSSI is greater that 5. This
222 * also should be done when the RSSI was actually better
223 * then the previous sample.
224 * When the difference exceeds the threshold we should
225 * sample the rssi from the other antenna to make a valid
226 * comparison between the 2 antennas.
228 if (abs(rssi_curr - rssi_old) < 5)
231 rt2x00dev->link.ant.flags |= ANTENNA_MODE_SAMPLE;
233 if (rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY)
234 rx = (rx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
236 if (rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)
237 tx = (tx == ANTENNA_A) ? ANTENNA_B : ANTENNA_A;
239 rt2x00lib_config_antenna(rt2x00dev, rx, tx);
242 static void rt2x00lib_evaluate_antenna(struct rt2x00_dev *rt2x00dev)
245 * Determine if software diversity is enabled for
246 * either the TX or RX antenna (or both).
247 * Always perform this check since within the link
248 * tuner interval the configuration might have changed.
250 rt2x00dev->link.ant.flags &= ~ANTENNA_RX_DIVERSITY;
251 rt2x00dev->link.ant.flags &= ~ANTENNA_TX_DIVERSITY;
253 if (rt2x00dev->hw->conf.antenna_sel_rx == 0 &&
254 rt2x00dev->default_ant.rx == ANTENNA_SW_DIVERSITY)
255 rt2x00dev->link.ant.flags |= ANTENNA_RX_DIVERSITY;
256 if (rt2x00dev->hw->conf.antenna_sel_tx == 0 &&
257 rt2x00dev->default_ant.tx == ANTENNA_SW_DIVERSITY)
258 rt2x00dev->link.ant.flags |= ANTENNA_TX_DIVERSITY;
260 if (!(rt2x00dev->link.ant.flags & ANTENNA_RX_DIVERSITY) &&
261 !(rt2x00dev->link.ant.flags & ANTENNA_TX_DIVERSITY)) {
262 rt2x00dev->link.ant.flags = 0;
267 * If we have only sampled the data over the last period
268 * we should now harvest the data. Otherwise just evaluate
269 * the data. The latter should only be performed once
272 if (rt2x00dev->link.ant.flags & ANTENNA_MODE_SAMPLE)
273 rt2x00lib_evaluate_antenna_sample(rt2x00dev);
274 else if (rt2x00dev->link.count & 1)
275 rt2x00lib_evaluate_antenna_eval(rt2x00dev);
278 static void rt2x00lib_update_link_stats(struct link *link, int rssi)
285 if (link->qual.avg_rssi)
286 avg_rssi = MOVING_AVERAGE(link->qual.avg_rssi, rssi, 8);
287 link->qual.avg_rssi = avg_rssi;
290 * Update antenna RSSI
292 if (link->ant.rssi_ant)
293 rssi = MOVING_AVERAGE(link->ant.rssi_ant, rssi, 8);
294 link->ant.rssi_ant = rssi;
297 static void rt2x00lib_precalculate_link_signal(struct link_qual *qual)
299 if (qual->rx_failed || qual->rx_success)
300 qual->rx_percentage =
301 (qual->rx_success * 100) /
302 (qual->rx_failed + qual->rx_success);
304 qual->rx_percentage = 50;
306 if (qual->tx_failed || qual->tx_success)
307 qual->tx_percentage =
308 (qual->tx_success * 100) /
309 (qual->tx_failed + qual->tx_success);
311 qual->tx_percentage = 50;
313 qual->rx_success = 0;
315 qual->tx_success = 0;
319 static int rt2x00lib_calculate_link_signal(struct rt2x00_dev *rt2x00dev,
322 int rssi_percentage = 0;
326 * We need a positive value for the RSSI.
329 rssi += rt2x00dev->rssi_offset;
332 * Calculate the different percentages,
333 * which will be used for the signal.
335 if (rt2x00dev->rssi_offset)
336 rssi_percentage = (rssi * 100) / rt2x00dev->rssi_offset;
339 * Add the individual percentages and use the WEIGHT
340 * defines to calculate the current link signal.
342 signal = ((WEIGHT_RSSI * rssi_percentage) +
343 (WEIGHT_TX * rt2x00dev->link.qual.tx_percentage) +
344 (WEIGHT_RX * rt2x00dev->link.qual.rx_percentage)) / 100;
346 return (signal > 100) ? 100 : signal;
349 static void rt2x00lib_link_tuner(struct work_struct *work)
351 struct rt2x00_dev *rt2x00dev =
352 container_of(work, struct rt2x00_dev, link.work.work);
355 * When the radio is shutting down we should
356 * immediately cease all link tuning.
358 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
364 rt2x00dev->ops->lib->link_stats(rt2x00dev, &rt2x00dev->link.qual);
365 rt2x00dev->low_level_stats.dot11FCSErrorCount +=
366 rt2x00dev->link.qual.rx_failed;
369 * Only perform the link tuning when Link tuning
370 * has been enabled (This could have been disabled from the EEPROM).
372 if (!test_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags))
373 rt2x00dev->ops->lib->link_tuner(rt2x00dev);
376 * Precalculate a portion of the link signal which is
377 * in based on the tx/rx success/failure counters.
379 rt2x00lib_precalculate_link_signal(&rt2x00dev->link.qual);
382 * Send a signal to the led to update the led signal strength.
384 rt2x00leds_led_quality(rt2x00dev, rt2x00dev->link.qual.avg_rssi);
387 * Evaluate antenna setup, make this the last step since this could
388 * possibly reset some statistics.
390 rt2x00lib_evaluate_antenna(rt2x00dev);
393 * Increase tuner counter, and reschedule the next link tuner run.
395 rt2x00dev->link.count++;
396 queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work,
400 static void rt2x00lib_packetfilter_scheduled(struct work_struct *work)
402 struct rt2x00_dev *rt2x00dev =
403 container_of(work, struct rt2x00_dev, filter_work);
404 unsigned int filter = rt2x00dev->packet_filter;
407 * Since we had stored the filter inside rt2x00dev->packet_filter,
408 * we should now clear that field. Otherwise the driver will
409 * assume nothing has changed (*total_flags will be compared
410 * to rt2x00dev->packet_filter to determine if any action is required).
412 rt2x00dev->packet_filter = 0;
414 rt2x00dev->ops->hw->configure_filter(rt2x00dev->hw,
415 filter, &filter, 0, NULL);
418 static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac,
419 struct ieee80211_vif *vif)
421 struct rt2x00_dev *rt2x00dev = data;
422 struct rt2x00_intf *intf = vif_to_intf(vif);
424 struct ieee80211_tx_control control;
425 struct ieee80211_bss_conf conf;
429 * Copy all data we need during this action under the protection
430 * of a spinlock. Otherwise race conditions might occur which results
431 * into an invalid configuration.
433 spin_lock(&intf->lock);
435 memcpy(&conf, &intf->conf, sizeof(conf));
436 delayed_flags = intf->delayed_flags;
437 intf->delayed_flags = 0;
439 spin_unlock(&intf->lock);
441 if (delayed_flags & DELAYED_UPDATE_BEACON) {
442 skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control);
444 rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, skb,
450 if (delayed_flags & DELAYED_CONFIG_ERP)
451 rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf);
454 static void rt2x00lib_intf_scheduled(struct work_struct *work)
456 struct rt2x00_dev *rt2x00dev =
457 container_of(work, struct rt2x00_dev, intf_work);
460 * Iterate over each interface and perform the
461 * requested configurations.
463 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
464 rt2x00lib_intf_scheduled_iter,
469 * Interrupt context handlers.
471 static void rt2x00lib_beacondone_iter(void *data, u8 *mac,
472 struct ieee80211_vif *vif)
474 struct rt2x00_intf *intf = vif_to_intf(vif);
476 if (vif->type != IEEE80211_IF_TYPE_AP &&
477 vif->type != IEEE80211_IF_TYPE_IBSS)
480 spin_lock(&intf->lock);
481 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
482 spin_unlock(&intf->lock);
485 void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev)
487 if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
490 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
491 rt2x00lib_beacondone_iter,
494 queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
496 EXPORT_SYMBOL_GPL(rt2x00lib_beacondone);
498 void rt2x00lib_txdone(struct queue_entry *entry,
499 struct txdone_entry_desc *txdesc)
501 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
502 struct skb_frame_desc *skbdesc;
503 struct ieee80211_tx_status tx_status;
504 int success = !!(txdesc->status == TX_SUCCESS ||
505 txdesc->status == TX_SUCCESS_RETRY);
506 int fail = !!(txdesc->status == TX_FAIL_RETRY ||
507 txdesc->status == TX_FAIL_INVALID ||
508 txdesc->status == TX_FAIL_OTHER);
511 * Update TX statistics.
513 rt2x00dev->link.qual.tx_success += success;
514 rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
517 * Initialize TX status
520 tx_status.ack_signal = 0;
521 tx_status.excessive_retries = (txdesc->status == TX_FAIL_RETRY);
522 tx_status.retry_count = txdesc->retry;
523 memcpy(&tx_status.control, txdesc->control, sizeof(*txdesc->control));
525 if (!(tx_status.control.flags & IEEE80211_TXCTL_NO_ACK)) {
527 tx_status.flags |= IEEE80211_TX_STATUS_ACK;
529 rt2x00dev->low_level_stats.dot11ACKFailureCount++;
532 tx_status.queue_length = entry->queue->limit;
533 tx_status.queue_number = tx_status.control.queue;
535 if (tx_status.control.flags & IEEE80211_TXCTL_USE_RTS_CTS) {
537 rt2x00dev->low_level_stats.dot11RTSSuccessCount++;
539 rt2x00dev->low_level_stats.dot11RTSFailureCount++;
543 * Send the tx_status to debugfs. Only send the status report
544 * to mac80211 when the frame originated from there. If this was
545 * a extra frame coming through a mac80211 library call (RTS/CTS)
546 * then we should not send the status report back.
547 * If send to mac80211, mac80211 will clean up the skb structure,
548 * otherwise we have to do it ourself.
550 skbdesc = get_skb_frame_desc(entry->skb);
551 skbdesc->frame_type = DUMP_FRAME_TXDONE;
553 rt2x00debug_dump_frame(rt2x00dev, entry->skb);
555 if (!(skbdesc->flags & FRAME_DESC_DRIVER_GENERATED))
556 ieee80211_tx_status_irqsafe(rt2x00dev->hw,
557 entry->skb, &tx_status);
559 dev_kfree_skb(entry->skb);
562 EXPORT_SYMBOL_GPL(rt2x00lib_txdone);
564 void rt2x00lib_rxdone(struct queue_entry *entry,
565 struct rxdone_entry_desc *rxdesc)
567 struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev;
568 struct ieee80211_rx_status *rx_status = &rt2x00dev->rx_status;
569 struct ieee80211_supported_band *sband;
570 struct ieee80211_hdr *hdr;
571 const struct rt2x00_rate *rate;
577 * Update RX statistics.
579 sband = &rt2x00dev->bands[rt2x00dev->curr_band];
580 for (i = 0; i < sband->n_bitrates; i++) {
581 rate = rt2x00_get_rate(sband->bitrates[i].hw_value);
583 if (((rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
584 (rate->plcp == rxdesc->signal)) ||
585 (!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP) &&
586 (rate->bitrate == rxdesc->signal))) {
593 WARNING(rt2x00dev, "Frame received with unrecognized signal,"
594 "signal=0x%.2x, plcp=%d.\n", rxdesc->signal,
595 !!(rxdesc->dev_flags & RXDONE_SIGNAL_PLCP));
600 * Only update link status if this is a beacon frame carrying our bssid.
602 hdr = (struct ieee80211_hdr *)entry->skb->data;
603 fc = le16_to_cpu(hdr->frame_control);
604 if (is_beacon(fc) && (rxdesc->dev_flags & RXDONE_MY_BSS))
605 rt2x00lib_update_link_stats(&rt2x00dev->link, rxdesc->rssi);
607 rt2x00dev->link.qual.rx_success++;
609 rx_status->rate_idx = idx;
611 rt2x00lib_calculate_link_signal(rt2x00dev, rxdesc->rssi);
612 rx_status->ssi = rxdesc->rssi;
613 rx_status->flag = rxdesc->flags;
614 rx_status->antenna = rt2x00dev->link.ant.active.rx;
617 * Send frame to mac80211 & debugfs.
618 * mac80211 will clean up the skb structure.
620 get_skb_frame_desc(entry->skb)->frame_type = DUMP_FRAME_RXDONE;
621 rt2x00debug_dump_frame(rt2x00dev, entry->skb);
622 ieee80211_rx_irqsafe(rt2x00dev->hw, entry->skb, rx_status);
625 EXPORT_SYMBOL_GPL(rt2x00lib_rxdone);
628 * TX descriptor initializer
630 void rt2x00lib_write_tx_desc(struct rt2x00_dev *rt2x00dev,
632 struct ieee80211_tx_control *control)
634 struct txentry_desc txdesc;
635 struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
636 struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skbdesc->data;
637 const struct rt2x00_rate *rate;
645 memset(&txdesc, 0, sizeof(txdesc));
647 txdesc.queue = skbdesc->entry->queue->qid;
648 txdesc.cw_min = skbdesc->entry->queue->cw_min;
649 txdesc.cw_max = skbdesc->entry->queue->cw_max;
650 txdesc.aifs = skbdesc->entry->queue->aifs;
653 * Read required fields from ieee80211 header.
655 frame_control = le16_to_cpu(hdr->frame_control);
656 seq_ctrl = le16_to_cpu(hdr->seq_ctrl);
658 tx_rate = control->tx_rate->hw_value;
661 * Check whether this frame is to be acked
663 if (!(control->flags & IEEE80211_TXCTL_NO_ACK))
664 __set_bit(ENTRY_TXD_ACK, &txdesc.flags);
667 * Check if this is a RTS/CTS frame
669 if (is_rts_frame(frame_control) || is_cts_frame(frame_control)) {
670 __set_bit(ENTRY_TXD_BURST, &txdesc.flags);
671 if (is_rts_frame(frame_control)) {
672 __set_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags);
673 __set_bit(ENTRY_TXD_ACK, &txdesc.flags);
675 __clear_bit(ENTRY_TXD_ACK, &txdesc.flags);
676 if (control->rts_cts_rate)
677 tx_rate = control->rts_cts_rate->hw_value;
680 rate = rt2x00_get_rate(tx_rate);
683 * Check if more fragments are pending
685 if (ieee80211_get_morefrag(hdr)) {
686 __set_bit(ENTRY_TXD_BURST, &txdesc.flags);
687 __set_bit(ENTRY_TXD_MORE_FRAG, &txdesc.flags);
691 * Beacons and probe responses require the tsf timestamp
692 * to be inserted into the frame.
694 if (control->queue == RT2X00_BCN_QUEUE_BEACON ||
695 is_probe_resp(frame_control))
696 __set_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc.flags);
699 * Determine with what IFS priority this frame should be send.
700 * Set ifs to IFS_SIFS when the this is not the first fragment,
701 * or this fragment came after RTS/CTS.
703 if ((seq_ctrl & IEEE80211_SCTL_FRAG) > 0 ||
704 test_bit(ENTRY_TXD_RTS_FRAME, &txdesc.flags))
705 txdesc.ifs = IFS_SIFS;
707 txdesc.ifs = IFS_BACKOFF;
711 * Length calculation depends on OFDM/CCK rate.
713 txdesc.signal = rate->plcp;
714 txdesc.service = 0x04;
716 length = skbdesc->data_len + FCS_LEN;
717 if (rate->flags & DEV_RATE_OFDM) {
718 __set_bit(ENTRY_TXD_OFDM_RATE, &txdesc.flags);
720 txdesc.length_high = (length >> 6) & 0x3f;
721 txdesc.length_low = length & 0x3f;
724 * Convert length to microseconds.
726 residual = get_duration_res(length, rate->bitrate);
727 duration = get_duration(length, rate->bitrate);
733 * Check if we need to set the Length Extension
735 if (rate->bitrate == 110 && residual <= 30)
736 txdesc.service |= 0x80;
739 txdesc.length_high = (duration >> 8) & 0xff;
740 txdesc.length_low = duration & 0xff;
743 * When preamble is enabled we should set the
744 * preamble bit for the signal.
746 if (rt2x00_get_rate_preamble(tx_rate))
747 txdesc.signal |= 0x08;
750 rt2x00dev->ops->lib->write_tx_desc(rt2x00dev, skb, &txdesc, control);
753 * Update queue entry.
755 skbdesc->entry->skb = skb;
758 * The frame has been completely initialized and ready
759 * for sending to the device. The caller will push the
760 * frame to the device, but we are going to push the
761 * frame to debugfs here.
763 skbdesc->frame_type = DUMP_FRAME_TX;
764 rt2x00debug_dump_frame(rt2x00dev, skb);
766 EXPORT_SYMBOL_GPL(rt2x00lib_write_tx_desc);
769 * Driver initialization handlers.
771 const struct rt2x00_rate rt2x00_supported_rates[12] = {
773 .flags = DEV_RATE_CCK | DEV_RATE_BASIC,
779 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
785 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
791 .flags = DEV_RATE_CCK | DEV_RATE_SHORT_PREAMBLE | DEV_RATE_BASIC,
797 .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
803 .flags = DEV_RATE_OFDM,
809 .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
815 .flags = DEV_RATE_OFDM,
821 .flags = DEV_RATE_OFDM | DEV_RATE_BASIC,
827 .flags = DEV_RATE_OFDM,
833 .flags = DEV_RATE_OFDM,
839 .flags = DEV_RATE_OFDM,
846 static void rt2x00lib_channel(struct ieee80211_channel *entry,
847 const int channel, const int tx_power,
850 entry->center_freq = ieee80211_channel_to_frequency(channel);
851 entry->hw_value = value;
852 entry->max_power = tx_power;
853 entry->max_antenna_gain = 0xff;
856 static void rt2x00lib_rate(struct ieee80211_rate *entry,
857 const u16 index, const struct rt2x00_rate *rate)
860 entry->bitrate = rate->bitrate;
861 entry->hw_value = rt2x00_create_rate_hw_value(index, 0);
862 entry->hw_value_short = entry->hw_value;
864 if (rate->flags & DEV_RATE_SHORT_PREAMBLE) {
865 entry->flags |= IEEE80211_RATE_SHORT_PREAMBLE;
866 entry->hw_value_short |= rt2x00_create_rate_hw_value(index, 1);
870 static int rt2x00lib_probe_hw_modes(struct rt2x00_dev *rt2x00dev,
871 struct hw_mode_spec *spec)
873 struct ieee80211_hw *hw = rt2x00dev->hw;
874 struct ieee80211_channel *channels;
875 struct ieee80211_rate *rates;
876 unsigned int num_rates;
878 unsigned char tx_power;
881 if (spec->supported_rates & SUPPORT_RATE_CCK)
883 if (spec->supported_rates & SUPPORT_RATE_OFDM)
886 channels = kzalloc(sizeof(*channels) * spec->num_channels, GFP_KERNEL);
890 rates = kzalloc(sizeof(*rates) * num_rates, GFP_KERNEL);
892 goto exit_free_channels;
895 * Initialize Rate list.
897 for (i = 0; i < num_rates; i++)
898 rt2x00lib_rate(&rates[i], i, rt2x00_get_rate(i));
901 * Initialize Channel list.
903 for (i = 0; i < spec->num_channels; i++) {
904 if (spec->channels[i].channel <= 14) {
905 if (spec->tx_power_bg)
906 tx_power = spec->tx_power_bg[i];
908 tx_power = spec->tx_power_default;
910 if (spec->tx_power_a)
911 tx_power = spec->tx_power_a[i];
913 tx_power = spec->tx_power_default;
916 rt2x00lib_channel(&channels[i],
917 spec->channels[i].channel, tx_power, i);
921 * Intitialize 802.11b, 802.11g
925 if (spec->supported_bands & SUPPORT_BAND_2GHZ) {
926 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_channels = 14;
927 rt2x00dev->bands[IEEE80211_BAND_2GHZ].n_bitrates = num_rates;
928 rt2x00dev->bands[IEEE80211_BAND_2GHZ].channels = channels;
929 rt2x00dev->bands[IEEE80211_BAND_2GHZ].bitrates = rates;
930 hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
931 &rt2x00dev->bands[IEEE80211_BAND_2GHZ];
935 * Intitialize 802.11a
937 * Channels: OFDM, UNII, HiperLAN2.
939 if (spec->supported_bands & SUPPORT_BAND_5GHZ) {
940 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_channels =
941 spec->num_channels - 14;
942 rt2x00dev->bands[IEEE80211_BAND_5GHZ].n_bitrates =
944 rt2x00dev->bands[IEEE80211_BAND_5GHZ].channels = &channels[14];
945 rt2x00dev->bands[IEEE80211_BAND_5GHZ].bitrates = &rates[4];
946 hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
947 &rt2x00dev->bands[IEEE80211_BAND_5GHZ];
954 ERROR(rt2x00dev, "Allocation ieee80211 modes failed.\n");
958 static void rt2x00lib_remove_hw(struct rt2x00_dev *rt2x00dev)
960 if (test_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags))
961 ieee80211_unregister_hw(rt2x00dev->hw);
963 if (likely(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ])) {
964 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->channels);
965 kfree(rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ]->bitrates);
966 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = NULL;
967 rt2x00dev->hw->wiphy->bands[IEEE80211_BAND_5GHZ] = NULL;
971 static int rt2x00lib_probe_hw(struct rt2x00_dev *rt2x00dev)
973 struct hw_mode_spec *spec = &rt2x00dev->spec;
977 * Initialize HW modes.
979 status = rt2x00lib_probe_hw_modes(rt2x00dev, spec);
986 status = ieee80211_register_hw(rt2x00dev->hw);
988 rt2x00lib_remove_hw(rt2x00dev);
992 __set_bit(DEVICE_REGISTERED_HW, &rt2x00dev->flags);
998 * Initialization/uninitialization handlers.
1000 static void rt2x00lib_uninitialize(struct rt2x00_dev *rt2x00dev)
1002 if (!__test_and_clear_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
1006 * Unregister extra components.
1008 rt2x00rfkill_unregister(rt2x00dev);
1011 * Allow the HW to uninitialize.
1013 rt2x00dev->ops->lib->uninitialize(rt2x00dev);
1016 * Free allocated queue entries.
1018 rt2x00queue_uninitialize(rt2x00dev);
1021 static int rt2x00lib_initialize(struct rt2x00_dev *rt2x00dev)
1025 if (test_bit(DEVICE_INITIALIZED, &rt2x00dev->flags))
1029 * Allocate all queue entries.
1031 status = rt2x00queue_initialize(rt2x00dev);
1036 * Initialize the device.
1038 status = rt2x00dev->ops->lib->initialize(rt2x00dev);
1042 __set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
1045 * Register the extra components.
1047 rt2x00rfkill_register(rt2x00dev);
1052 rt2x00lib_uninitialize(rt2x00dev);
1057 int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
1061 if (test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1065 * If this is the first interface which is added,
1066 * we should load the firmware now.
1068 retval = rt2x00lib_load_firmware(rt2x00dev);
1073 * Initialize the device.
1075 retval = rt2x00lib_initialize(rt2x00dev);
1082 retval = rt2x00lib_enable_radio(rt2x00dev);
1084 rt2x00lib_uninitialize(rt2x00dev);
1088 rt2x00dev->intf_ap_count = 0;
1089 rt2x00dev->intf_sta_count = 0;
1090 rt2x00dev->intf_associated = 0;
1092 __set_bit(DEVICE_STARTED, &rt2x00dev->flags);
1097 void rt2x00lib_stop(struct rt2x00_dev *rt2x00dev)
1099 if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1103 * Perhaps we can add something smarter here,
1104 * but for now just disabling the radio should do.
1106 rt2x00lib_disable_radio(rt2x00dev);
1108 rt2x00dev->intf_ap_count = 0;
1109 rt2x00dev->intf_sta_count = 0;
1110 rt2x00dev->intf_associated = 0;
1112 __clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
1116 * driver allocation handlers.
1118 int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
1120 int retval = -ENOMEM;
1123 * Make room for rt2x00_intf inside the per-interface
1124 * structure ieee80211_vif.
1126 rt2x00dev->hw->vif_data_size = sizeof(struct rt2x00_intf);
1129 * Let the driver probe the device to detect the capabilities.
1131 retval = rt2x00dev->ops->lib->probe_hw(rt2x00dev);
1133 ERROR(rt2x00dev, "Failed to allocate device.\n");
1138 * Initialize configuration work.
1140 INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
1141 INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled);
1142 INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner);
1145 * Allocate queue array.
1147 retval = rt2x00queue_allocate(rt2x00dev);
1152 * Initialize ieee80211 structure.
1154 retval = rt2x00lib_probe_hw(rt2x00dev);
1156 ERROR(rt2x00dev, "Failed to initialize hw.\n");
1161 * Register extra components.
1163 rt2x00leds_register(rt2x00dev);
1164 rt2x00rfkill_allocate(rt2x00dev);
1165 rt2x00debug_register(rt2x00dev);
1167 __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1172 rt2x00lib_remove_dev(rt2x00dev);
1176 EXPORT_SYMBOL_GPL(rt2x00lib_probe_dev);
1178 void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
1180 __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1185 rt2x00lib_disable_radio(rt2x00dev);
1188 * Uninitialize device.
1190 rt2x00lib_uninitialize(rt2x00dev);
1193 * Free extra components
1195 rt2x00debug_deregister(rt2x00dev);
1196 rt2x00rfkill_free(rt2x00dev);
1201 rt2x00leds_unregister(rt2x00dev);
1204 * Free ieee80211_hw memory.
1206 rt2x00lib_remove_hw(rt2x00dev);
1209 * Free firmware image.
1211 rt2x00lib_free_firmware(rt2x00dev);
1214 * Free queue structures.
1216 rt2x00queue_free(rt2x00dev);
1218 EXPORT_SYMBOL_GPL(rt2x00lib_remove_dev);
1221 * Device state handlers
1224 int rt2x00lib_suspend(struct rt2x00_dev *rt2x00dev, pm_message_t state)
1228 NOTICE(rt2x00dev, "Going to sleep.\n");
1229 __clear_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1232 * Only continue if mac80211 has open interfaces.
1234 if (!test_bit(DEVICE_STARTED, &rt2x00dev->flags))
1236 __set_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags);
1241 rt2x00lib_stop(rt2x00dev);
1242 rt2x00lib_uninitialize(rt2x00dev);
1245 * Suspend/disable extra components.
1247 rt2x00leds_suspend(rt2x00dev);
1248 rt2x00rfkill_suspend(rt2x00dev);
1249 rt2x00debug_deregister(rt2x00dev);
1253 * Set device mode to sleep for power management.
1255 retval = rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_SLEEP);
1261 EXPORT_SYMBOL_GPL(rt2x00lib_suspend);
1263 static void rt2x00lib_resume_intf(void *data, u8 *mac,
1264 struct ieee80211_vif *vif)
1266 struct rt2x00_dev *rt2x00dev = data;
1267 struct rt2x00_intf *intf = vif_to_intf(vif);
1269 spin_lock(&intf->lock);
1271 rt2x00lib_config_intf(rt2x00dev, intf,
1272 vif->type, intf->mac, intf->bssid);
1276 * Master or Ad-hoc mode require a new beacon update.
1278 if (vif->type == IEEE80211_IF_TYPE_AP ||
1279 vif->type == IEEE80211_IF_TYPE_IBSS)
1280 intf->delayed_flags |= DELAYED_UPDATE_BEACON;
1282 spin_unlock(&intf->lock);
1285 int rt2x00lib_resume(struct rt2x00_dev *rt2x00dev)
1289 NOTICE(rt2x00dev, "Waking up.\n");
1292 * Restore/enable extra components.
1294 rt2x00debug_register(rt2x00dev);
1295 rt2x00rfkill_resume(rt2x00dev);
1296 rt2x00leds_resume(rt2x00dev);
1299 * Only continue if mac80211 had open interfaces.
1301 if (!__test_and_clear_bit(DEVICE_STARTED_SUSPEND, &rt2x00dev->flags))
1305 * Reinitialize device and all active interfaces.
1307 retval = rt2x00lib_start(rt2x00dev);
1312 * Reconfigure device.
1314 rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf, 1);
1315 if (!rt2x00dev->hw->conf.radio_enabled)
1316 rt2x00lib_disable_radio(rt2x00dev);
1319 * Iterator over each active interface to
1320 * reconfigure the hardware.
1322 ieee80211_iterate_active_interfaces(rt2x00dev->hw,
1323 rt2x00lib_resume_intf, rt2x00dev);
1326 * We are ready again to receive requests from mac80211.
1328 __set_bit(DEVICE_PRESENT, &rt2x00dev->flags);
1331 * It is possible that during that mac80211 has attempted
1332 * to send frames while we were suspending or resuming.
1333 * In that case we have disabled the TX queue and should
1334 * now enable it again
1336 ieee80211_start_queues(rt2x00dev->hw);
1339 * During interface iteration we might have changed the
1340 * delayed_flags, time to handles the event by calling
1341 * the work handler directly.
1343 rt2x00lib_intf_scheduled(&rt2x00dev->intf_work);
1348 rt2x00lib_disable_radio(rt2x00dev);
1349 rt2x00lib_uninitialize(rt2x00dev);
1350 rt2x00debug_deregister(rt2x00dev);
1354 EXPORT_SYMBOL_GPL(rt2x00lib_resume);
1355 #endif /* CONFIG_PM */
1358 * rt2x00lib module information.
1360 MODULE_AUTHOR(DRV_PROJECT);
1361 MODULE_VERSION(DRV_VERSION);
1362 MODULE_DESCRIPTION("rt2x00 library");
1363 MODULE_LICENSE("GPL");