git.oblomov.eu Git - linux-2.6/blob - arch/x86/kernel/hpet.c

   1 #include <linux/clocksource.h>
   2 #include <linux/clockchips.h>
   3 #include <linux/interrupt.h>
   4 #include <linux/sysdev.h>
   5 #include <linux/delay.h>
   6 #include <linux/errno.h>
   7 #include <linux/hpet.h>
   8 #include <linux/init.h>
   9 #include <linux/cpu.h>
  10 #include <linux/pm.h>
  11 #include <linux/io.h>
  12
  13 #include <asm/fixmap.h>
  14 #include <asm/i8253.h>
  15 #include <asm/hpet.h>
  16
  17 #define HPET_MASK                       CLOCKSOURCE_MASK(32)
  18 #define HPET_SHIFT                      22
  19
  20 /* FSEC = 10^-15
  21    NSEC = 10^-9 */
  22 #define FSEC_PER_NSEC                   1000000L
  23
  24 #define HPET_DEV_USED_BIT               2
  25 #define HPET_DEV_USED                   (1 << HPET_DEV_USED_BIT)
  26 #define HPET_DEV_VALID                  0x8
  27 #define HPET_DEV_FSB_CAP                0x1000
  28 #define HPET_DEV_PERI_CAP               0x2000
  29
  30 #define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
  31
  32 /*
  33  * HPET address is set in acpi/boot.c, when an ACPI entry exists
  34  */
  35 unsigned long                           hpet_address;
  36 unsigned long                           hpet_num_timers;
  37 static void __iomem                     *hpet_virt_address;
  38
  39 struct hpet_dev {
  40         struct clock_event_device       evt;
  41         unsigned int                    num;
  42         int                             cpu;
  43         unsigned int                    irq;
  44         unsigned int                    flags;
  45         char                            name[10];
  46 };
  47
  48 unsigned long hpet_readl(unsigned long a)
  49 {
  50         return readl(hpet_virt_address + a);
  51 }
  52
  53 static inline void hpet_writel(unsigned long d, unsigned long a)
  54 {
  55         writel(d, hpet_virt_address + a);
  56 }
  57
  58 #ifdef CONFIG_X86_64
  59 #include <asm/pgtable.h>
  60 #endif
  61
  62 static inline void hpet_set_mapping(void)
  63 {
  64         hpet_virt_address = ioremap_nocache(hpet_address, HPET_MMAP_SIZE);
  65 #ifdef CONFIG_X86_64
  66         __set_fixmap(VSYSCALL_HPET, hpet_address, PAGE_KERNEL_VSYSCALL_NOCACHE);
  67 #endif
  68 }
  69
  70 static inline void hpet_clear_mapping(void)
  71 {
  72         iounmap(hpet_virt_address);
  73         hpet_virt_address = NULL;
  74 }
  75
  76 /*
  77  * HPET command line enable / disable
  78  */
  79 static int boot_hpet_disable;
  80 int hpet_force_user;
  81
  82 static int __init hpet_setup(char *str)
  83 {
  84         if (str) {
  85                 if (!strncmp("disable", str, 7))
  86                         boot_hpet_disable = 1;
  87                 if (!strncmp("force", str, 5))
  88                         hpet_force_user = 1;
  89         }
  90         return 1;
  91 }
  92 __setup("hpet=", hpet_setup);
  93
  94 static int __init disable_hpet(char *str)
  95 {
  96         boot_hpet_disable = 1;
  97         return 1;
  98 }
  99 __setup("nohpet", disable_hpet);
 100
 101 static inline int is_hpet_capable(void)
 102 {
 103         return !boot_hpet_disable && hpet_address;
 104 }
 105
 106 /*
 107  * HPET timer interrupt enable / disable
 108  */
 109 static int hpet_legacy_int_enabled;
 110
 111 /**
 112  * is_hpet_enabled - check whether the hpet timer interrupt is enabled
 113  */
 114 int is_hpet_enabled(void)
 115 {
 116         return is_hpet_capable() && hpet_legacy_int_enabled;
 117 }
 118 EXPORT_SYMBOL_GPL(is_hpet_enabled);
 119
 120 /*
 121  * When the hpet driver (/dev/hpet) is enabled, we need to reserve
 122  * timer 0 and timer 1 in case of RTC emulation.
 123  */
 124 #ifdef CONFIG_HPET
 125
 126 static void hpet_reserve_msi_timers(struct hpet_data *hd);
 127
 128 static void hpet_reserve_platform_timers(unsigned long id)
 129 {
 130         struct hpet __iomem *hpet = hpet_virt_address;
 131         struct hpet_timer __iomem *timer = &hpet->hpet_timers[2];
 132         unsigned int nrtimers, i;
 133         struct hpet_data hd;
 134
 135         nrtimers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT) + 1;
 136
 137         memset(&hd, 0, sizeof(hd));
 138         hd.hd_phys_address      = hpet_address;
 139         hd.hd_address           = hpet;
 140         hd.hd_nirqs             = nrtimers;
 141         hpet_reserve_timer(&hd, 0);
 142
 143 #ifdef CONFIG_HPET_EMULATE_RTC
 144         hpet_reserve_timer(&hd, 1);
 145 #endif
 146
 147         /*
 148          * NOTE that hd_irq[] reflects IOAPIC input pins (LEGACY_8254
 149          * is wrong for i8259!) not the output IRQ.  Many BIOS writers
 150          * don't bother configuring *any* comparator interrupts.
 151          */
 152         hd.hd_irq[0] = HPET_LEGACY_8254;
 153         hd.hd_irq[1] = HPET_LEGACY_RTC;
 154
 155         for (i = 2; i < nrtimers; timer++, i++) {
 156                 hd.hd_irq[i] = (readl(&timer->hpet_config) &
 157                         Tn_INT_ROUTE_CNF_MASK) >> Tn_INT_ROUTE_CNF_SHIFT;
 158         }
 159
 160         hpet_reserve_msi_timers(&hd);
 161
 162         hpet_alloc(&hd);
 163
 164 }
 165 #else
 166 static void hpet_reserve_platform_timers(unsigned long id) { }
 167 #endif
 168
 169 /*
 170  * Common hpet info
 171  */
 172 static unsigned long hpet_period;
 173
 174 static void hpet_legacy_set_mode(enum clock_event_mode mode,
 175                           struct clock_event_device *evt);
 176 static int hpet_legacy_next_event(unsigned long delta,
 177                            struct clock_event_device *evt);
 178
 179 /*
 180  * The hpet clock event device
 181  */
 182 static struct clock_event_device hpet_clockevent = {
 183         .name           = "hpet",
 184         .features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 185         .set_mode       = hpet_legacy_set_mode,
 186         .set_next_event = hpet_legacy_next_event,
 187         .shift          = 32,
 188         .irq            = 0,
 189         .rating         = 50,
 190 };
 191
 192 static void hpet_start_counter(void)
 193 {
 194         unsigned long cfg = hpet_readl(HPET_CFG);
 195
 196         cfg &= ~HPET_CFG_ENABLE;
 197         hpet_writel(cfg, HPET_CFG);
 198         hpet_writel(0, HPET_COUNTER);
 199         hpet_writel(0, HPET_COUNTER + 4);
 200         cfg |= HPET_CFG_ENABLE;
 201         hpet_writel(cfg, HPET_CFG);
 202 }
 203
 204 static void hpet_resume_device(void)
 205 {
 206         force_hpet_resume();
 207 }
 208
 209 static void hpet_restart_counter(void)
 210 {
 211         hpet_resume_device();
 212         hpet_start_counter();
 213 }
 214
 215 static void hpet_enable_legacy_int(void)
 216 {
 217         unsigned long cfg = hpet_readl(HPET_CFG);
 218
 219         cfg |= HPET_CFG_LEGACY;
 220         hpet_writel(cfg, HPET_CFG);
 221         hpet_legacy_int_enabled = 1;
 222 }
 223
 224 static void hpet_legacy_clockevent_register(void)
 225 {
 226         /* Start HPET legacy interrupts */
 227         hpet_enable_legacy_int();
 228
 229         /*
 230          * The mult factor is defined as (include/linux/clockchips.h)
 231          *  mult/2^shift = cyc/ns (in contrast to ns/cyc in clocksource.h)
 232          * hpet_period is in units of femtoseconds (per cycle), so
 233          *  mult/2^shift = cyc/ns = 10^6/hpet_period
 234          *  mult = (10^6 * 2^shift)/hpet_period
 235          *  mult = (FSEC_PER_NSEC << hpet_clockevent.shift)/hpet_period
 236          */
 237         hpet_clockevent.mult = div_sc((unsigned long) FSEC_PER_NSEC,
 238                                       hpet_period, hpet_clockevent.shift);
 239         /* Calculate the min / max delta */
 240         hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
 241                                                            &hpet_clockevent);
 242         /* 5 usec minimum reprogramming delta. */
 243         hpet_clockevent.min_delta_ns = 5000;
 244
 245         /*
 246          * Start hpet with the boot cpu mask and make it
 247          * global after the IO_APIC has been initialized.
 248          */
 249         hpet_clockevent.cpumask = cpumask_of_cpu(smp_processor_id());
 250         clockevents_register_device(&hpet_clockevent);
 251         global_clock_event = &hpet_clockevent;
 252         printk(KERN_DEBUG "hpet clockevent registered\n");
 253 }
 254
 255 static int hpet_setup_msi_irq(unsigned int irq);
 256
 257 static void hpet_set_mode(enum clock_event_mode mode,
 258                           struct clock_event_device *evt, int timer)
 259 {
 260         unsigned long cfg, cmp, now;
 261         uint64_t delta;
 262
 263         switch (mode) {
 264         case CLOCK_EVT_MODE_PERIODIC:
 265                 delta = ((uint64_t)(NSEC_PER_SEC/HZ)) * evt->mult;
 266                 delta >>= evt->shift;
 267                 now = hpet_readl(HPET_COUNTER);
 268                 cmp = now + (unsigned long) delta;
 269                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 270                 cfg |= HPET_TN_ENABLE | HPET_TN_PERIODIC |
 271                        HPET_TN_SETVAL | HPET_TN_32BIT;
 272                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 273                 /*
 274                  * The first write after writing TN_SETVAL to the
 275                  * config register sets the counter value, the second
 276                  * write sets the period.
 277                  */
 278                 hpet_writel(cmp, HPET_Tn_CMP(timer));
 279                 udelay(1);
 280                 hpet_writel((unsigned long) delta, HPET_Tn_CMP(timer));
 281                 break;
 282
 283         case CLOCK_EVT_MODE_ONESHOT:
 284                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 285                 cfg &= ~HPET_TN_PERIODIC;
 286                 cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 287                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 288                 break;
 289
 290         case CLOCK_EVT_MODE_UNUSED:
 291         case CLOCK_EVT_MODE_SHUTDOWN:
 292                 cfg = hpet_readl(HPET_Tn_CFG(timer));
 293                 cfg &= ~HPET_TN_ENABLE;
 294                 hpet_writel(cfg, HPET_Tn_CFG(timer));
 295                 break;
 296
 297         case CLOCK_EVT_MODE_RESUME:
 298                 if (timer == 0) {
 299                         hpet_enable_legacy_int();
 300                 } else {
 301                         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 302                         hpet_setup_msi_irq(hdev->irq);
 303                         disable_irq(hdev->irq);
 304                         irq_set_affinity(hdev->irq, cpumask_of_cpu(hdev->cpu));
 305                         enable_irq(hdev->irq);
 306                 }
 307                 break;
 308         }
 309 }
 310
 311 static int hpet_next_event(unsigned long delta,
 312                            struct clock_event_device *evt, int timer)
 313 {
 314         u32 cnt;
 315
 316         cnt = hpet_readl(HPET_COUNTER);
 317         cnt += (u32) delta;
 318         hpet_writel(cnt, HPET_Tn_CMP(timer));
 319
 320         /*
 321          * We need to read back the CMP register to make sure that
 322          * what we wrote hit the chip before we compare it to the
 323          * counter.
 324          */
 325         WARN_ON((u32)hpet_readl(HPET_T0_CMP) != cnt);
 326
 327         return (s32)((u32)hpet_readl(HPET_COUNTER) - cnt) >= 0 ? -ETIME : 0;
 328 }
 329
 330 static void hpet_legacy_set_mode(enum clock_event_mode mode,
 331                         struct clock_event_device *evt)
 332 {
 333         hpet_set_mode(mode, evt, 0);
 334 }
 335
 336 static int hpet_legacy_next_event(unsigned long delta,
 337                         struct clock_event_device *evt)
 338 {
 339         return hpet_next_event(delta, evt, 0);
 340 }
 341
 342 /*
 343  * HPET MSI Support
 344  */
 345 #ifdef CONFIG_PCI_MSI
 346
 347 static DEFINE_PER_CPU(struct hpet_dev *, cpu_hpet_dev);
 348 static struct hpet_dev  *hpet_devs;
 349
 350 void hpet_msi_unmask(unsigned int irq)
 351 {
 352         struct hpet_dev *hdev = get_irq_data(irq);
 353         unsigned long cfg;
 354
 355         /* unmask it */
 356         cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
 357         cfg |= HPET_TN_FSB;
 358         hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 359 }
 360
 361 void hpet_msi_mask(unsigned int irq)
 362 {
 363         unsigned long cfg;
 364         struct hpet_dev *hdev = get_irq_data(irq);
 365
 366         /* mask it */
 367         cfg = hpet_readl(HPET_Tn_CFG(hdev->num));
 368         cfg &= ~HPET_TN_FSB;
 369         hpet_writel(cfg, HPET_Tn_CFG(hdev->num));
 370 }
 371
 372 void hpet_msi_write(unsigned int irq, struct msi_msg *msg)
 373 {
 374         struct hpet_dev *hdev = get_irq_data(irq);
 375
 376         hpet_writel(msg->data, HPET_Tn_ROUTE(hdev->num));
 377         hpet_writel(msg->address_lo, HPET_Tn_ROUTE(hdev->num) + 4);
 378 }
 379
 380 void hpet_msi_read(unsigned int irq, struct msi_msg *msg)
 381 {
 382         struct hpet_dev *hdev = get_irq_data(irq);
 383
 384         msg->data = hpet_readl(HPET_Tn_ROUTE(hdev->num));
 385         msg->address_lo = hpet_readl(HPET_Tn_ROUTE(hdev->num) + 4);
 386         msg->address_hi = 0;
 387 }
 388
 389 static void hpet_msi_set_mode(enum clock_event_mode mode,
 390                                 struct clock_event_device *evt)
 391 {
 392         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 393         hpet_set_mode(mode, evt, hdev->num);
 394 }
 395
 396 static int hpet_msi_next_event(unsigned long delta,
 397                                 struct clock_event_device *evt)
 398 {
 399         struct hpet_dev *hdev = EVT_TO_HPET_DEV(evt);
 400         return hpet_next_event(delta, evt, hdev->num);
 401 }
 402
 403 static int hpet_setup_msi_irq(unsigned int irq)
 404 {
 405         if (arch_setup_hpet_msi(irq)) {
 406                 destroy_irq(irq);
 407                 return -EINVAL;
 408         }
 409         return 0;
 410 }
 411
 412 static int hpet_assign_irq(struct hpet_dev *dev)
 413 {
 414         unsigned int irq;
 415
 416         irq = create_irq();
 417         if (!irq)
 418                 return -EINVAL;
 419
 420         set_irq_data(irq, dev);
 421
 422         if (hpet_setup_msi_irq(irq))
 423                 return -EINVAL;
 424
 425         dev->irq = irq;
 426         return 0;
 427 }
 428
 429 static irqreturn_t hpet_interrupt_handler(int irq, void *data)
 430 {
 431         struct hpet_dev *dev = (struct hpet_dev *)data;
 432         struct clock_event_device *hevt = &dev->evt;
 433
 434         if (!hevt->event_handler) {
 435                 printk(KERN_INFO "Spurious HPET timer interrupt on HPET timer %d\n",
 436                                 dev->num);
 437                 return IRQ_HANDLED;
 438         }
 439
 440         hevt->event_handler(hevt);
 441         return IRQ_HANDLED;
 442 }
 443
 444 static int hpet_setup_irq(struct hpet_dev *dev)
 445 {
 446
 447         if (request_irq(dev->irq, hpet_interrupt_handler,
 448                         IRQF_SHARED|IRQF_NOBALANCING, dev->name, dev))
 449                 return -1;
 450
 451         disable_irq(dev->irq);
 452         irq_set_affinity(dev->irq, cpumask_of_cpu(dev->cpu));
 453         enable_irq(dev->irq);
 454
 455         printk(KERN_DEBUG "hpet: %s irq %d for MSI\n",
 456                          dev->name, dev->irq);
 457
 458         return 0;
 459 }
 460
 461 /* This should be called in specific @cpu */
 462 static void init_one_hpet_msi_clockevent(struct hpet_dev *hdev, int cpu)
 463 {
 464         struct clock_event_device *evt = &hdev->evt;
 465         uint64_t hpet_freq;
 466
 467         WARN_ON(cpu != smp_processor_id());
 468         if (!(hdev->flags & HPET_DEV_VALID))
 469                 return;
 470
 471         if (hpet_setup_msi_irq(hdev->irq))
 472                 return;
 473
 474         hdev->cpu = cpu;
 475         per_cpu(cpu_hpet_dev, cpu) = hdev;
 476         evt->name = hdev->name;
 477         hpet_setup_irq(hdev);
 478         evt->irq = hdev->irq;
 479
 480         evt->rating = 110;
 481         evt->features = CLOCK_EVT_FEAT_ONESHOT;
 482         if (hdev->flags & HPET_DEV_PERI_CAP)
 483                 evt->features |= CLOCK_EVT_FEAT_PERIODIC;
 484
 485         evt->set_mode = hpet_msi_set_mode;
 486         evt->set_next_event = hpet_msi_next_event;
 487         evt->shift = 32;
 488
 489         /*
 490          * The period is a femto seconds value. We need to calculate the
 491          * scaled math multiplication factor for nanosecond to hpet tick
 492          * conversion.
 493          */
 494         hpet_freq = 1000000000000000ULL;
 495         do_div(hpet_freq, hpet_period);
 496         evt->mult = div_sc((unsigned long) hpet_freq,
 497                                       NSEC_PER_SEC, evt->shift);
 498         /* Calculate the max delta */
 499         evt->max_delta_ns = clockevent_delta2ns(0x7FFFFFFF, evt);
 500         /* 5 usec minimum reprogramming delta. */
 501         evt->min_delta_ns = 5000;
 502
 503         evt->cpumask = cpumask_of_cpu(hdev->cpu);
 504         clockevents_register_device(evt);
 505 }
 506
 507 #ifdef CONFIG_HPET
 508 /* Reserve at least one timer for userspace (/dev/hpet) */
 509 #define RESERVE_TIMERS 1
 510 #else
 511 #define RESERVE_TIMERS 0
 512 #endif
 513
 514 static void hpet_msi_capability_lookup(unsigned int start_timer)
 515 {
 516         unsigned int id;
 517         unsigned int num_timers;
 518         unsigned int num_timers_used = 0;
 519         int i;
 520
 521         id = hpet_readl(HPET_ID);
 522
 523         num_timers = ((id & HPET_ID_NUMBER) >> HPET_ID_NUMBER_SHIFT);
 524         num_timers++; /* Value read out starts from 0 */
 525
 526         hpet_devs = kzalloc(sizeof(struct hpet_dev) * num_timers, GFP_KERNEL);
 527         if (!hpet_devs)
 528                 return;
 529
 530         hpet_num_timers = num_timers;
 531
 532         for (i = start_timer; i < num_timers - RESERVE_TIMERS; i++) {
 533                 struct hpet_dev *hdev = &hpet_devs[num_timers_used];
 534                 unsigned long cfg = hpet_readl(HPET_Tn_CFG(i));
 535
 536                 /* Only consider HPET timer with MSI support */
 537                 if (!(cfg & HPET_TN_FSB_CAP))
 538                         continue;
 539
 540                 hdev->flags = 0;
 541                 if (cfg & HPET_TN_PERIODIC_CAP)
 542                         hdev->flags |= HPET_DEV_PERI_CAP;
 543                 hdev->num = i;
 544
 545                 sprintf(hdev->name, "hpet%d", i);
 546                 if (hpet_assign_irq(hdev))
 547                         continue;
 548
 549                 hdev->flags |= HPET_DEV_FSB_CAP;
 550                 hdev->flags |= HPET_DEV_VALID;
 551                 num_timers_used++;
 552                 if (num_timers_used == num_possible_cpus())
 553                         break;
 554         }
 555
 556         printk(KERN_INFO "HPET: %d timers in total, %d timers will be used for per-cpu timer\n",
 557                 num_timers, num_timers_used);
 558 }
 559
 560 #ifdef CONFIG_HPET
 561 static void hpet_reserve_msi_timers(struct hpet_data *hd)
 562 {
 563         int i;
 564
 565         if (!hpet_devs)
 566                 return;
 567
 568         for (i = 0; i < hpet_num_timers; i++) {
 569                 struct hpet_dev *hdev = &hpet_devs[i];
 570
 571                 if (!(hdev->flags & HPET_DEV_VALID))
 572                         continue;
 573
 574                 hd->hd_irq[hdev->num] = hdev->irq;
 575                 hpet_reserve_timer(hd, hdev->num);
 576         }
 577 }
 578 #endif
 579
 580 static struct hpet_dev *hpet_get_unused_timer(void)
 581 {
 582         int i;
 583
 584         if (!hpet_devs)
 585                 return NULL;
 586
 587         for (i = 0; i < hpet_num_timers; i++) {
 588                 struct hpet_dev *hdev = &hpet_devs[i];
 589
 590                 if (!(hdev->flags & HPET_DEV_VALID))
 591                         continue;
 592                 if (test_and_set_bit(HPET_DEV_USED_BIT,
 593                         (unsigned long *)&hdev->flags))
 594                         continue;
 595                 return hdev;
 596         }
 597         return NULL;
 598 }
 599
 600 struct hpet_work_struct {
 601         struct delayed_work work;
 602         struct completion complete;
 603 };
 604
 605 static void hpet_work(struct work_struct *w)
 606 {
 607         struct hpet_dev *hdev;
 608         int cpu = smp_processor_id();
 609         struct hpet_work_struct *hpet_work;
 610
 611         hpet_work = container_of(w, struct hpet_work_struct, work.work);
 612
 613         hdev = hpet_get_unused_timer();
 614         if (hdev)
 615                 init_one_hpet_msi_clockevent(hdev, cpu);
 616
 617         complete(&hpet_work->complete);
 618 }
 619
 620 static int hpet_cpuhp_notify(struct notifier_block *n,
 621                 unsigned long action, void *hcpu)
 622 {
 623         unsigned long cpu = (unsigned long)hcpu;
 624         struct hpet_work_struct work;
 625         struct hpet_dev *hdev = per_cpu(cpu_hpet_dev, cpu);
 626
 627         switch (action & 0xf) {
 628         case CPU_ONLINE:
 629                 INIT_DELAYED_WORK(&work.work, hpet_work);
 630                 init_completion(&work.complete);
 631                 /* FIXME: add schedule_work_on() */
 632                 schedule_delayed_work_on(cpu, &work.work, 0);
 633                 wait_for_completion(&work.complete);
 634                 break;
 635         case CPU_DEAD:
 636                 if (hdev) {
 637                         free_irq(hdev->irq, hdev);
 638                         hdev->flags &= ~HPET_DEV_USED;
 639                         per_cpu(cpu_hpet_dev, cpu) = NULL;
 640                 }
 641                 break;
 642         }
 643         return NOTIFY_OK;
 644 }
 645 #else
 646
 647 static int hpet_setup_msi_irq(unsigned int irq)
 648 {
 649         return 0;
 650 }
 651 static void hpet_msi_capability_lookup(unsigned int start_timer)
 652 {
 653         return;
 654 }
 655
 656 #ifdef CONFIG_HPET
 657 static void hpet_reserve_msi_timers(struct hpet_data *hd)
 658 {
 659         return;
 660 }
 661 #endif
 662
 663 static int hpet_cpuhp_notify(struct notifier_block *n,
 664                 unsigned long action, void *hcpu)
 665 {
 666         return NOTIFY_OK;
 667 }
 668
 669 #endif
 670
 671 /*
 672  * Clock source related code
 673  */
 674 static cycle_t read_hpet(void)
 675 {
 676         return (cycle_t)hpet_readl(HPET_COUNTER);
 677 }
 678
 679 #ifdef CONFIG_X86_64
 680 static cycle_t __vsyscall_fn vread_hpet(void)
 681 {
 682         return readl((const void __iomem *)fix_to_virt(VSYSCALL_HPET) + 0xf0);
 683 }
 684 #endif
 685
 686 static struct clocksource clocksource_hpet = {
 687         .name           = "hpet",
 688         .rating         = 250,
 689         .read           = read_hpet,
 690         .mask           = HPET_MASK,
 691         .shift          = HPET_SHIFT,
 692         .flags          = CLOCK_SOURCE_IS_CONTINUOUS,
 693         .resume         = hpet_restart_counter,
 694 #ifdef CONFIG_X86_64
 695         .vread          = vread_hpet,
 696 #endif
 697 };
 698
 699 static int hpet_clocksource_register(void)
 700 {
 701         u64 start, now;
 702         cycle_t t1;
 703
 704         /* Start the counter */
 705         hpet_start_counter();
 706
 707         /* Verify whether hpet counter works */
 708         t1 = read_hpet();
 709         rdtscll(start);
 710
 711         /*
 712          * We don't know the TSC frequency yet, but waiting for
 713          * 200000 TSC cycles is safe:
 714          * 4 GHz == 50us
 715          * 1 GHz == 200us
 716          */
 717         do {
 718                 rep_nop();
 719                 rdtscll(now);
 720         } while ((now - start) < 200000UL);
 721
 722         if (t1 == read_hpet()) {
 723                 printk(KERN_WARNING
 724                        "HPET counter not counting. HPET disabled\n");
 725                 return -ENODEV;
 726         }
 727
 728         /*
 729          * The definition of mult is (include/linux/clocksource.h)
 730          * mult/2^shift = ns/cyc and hpet_period is in units of fsec/cyc
 731          * so we first need to convert hpet_period to ns/cyc units:
 732          *  mult/2^shift = ns/cyc = hpet_period/10^6
 733          *  mult = (hpet_period * 2^shift)/10^6
 734          *  mult = (hpet_period << shift)/FSEC_PER_NSEC
 735          */
 736         clocksource_hpet.mult = div_sc(hpet_period, FSEC_PER_NSEC, HPET_SHIFT);
 737
 738         clocksource_register(&clocksource_hpet);
 739
 740         return 0;
 741 }
 742
 743 /**
 744  * hpet_enable - Try to setup the HPET timer. Returns 1 on success.
 745  */
 746 int __init hpet_enable(void)
 747 {
 748         unsigned long id;
 749         int i;
 750
 751         if (!is_hpet_capable())
 752                 return 0;
 753
 754         hpet_set_mapping();
 755
 756         /*
 757          * Read the period and check for a sane value:
 758          */
 759         hpet_period = hpet_readl(HPET_PERIOD);
 760
 761         /*
 762          * AMD SB700 based systems with spread spectrum enabled use a
 763          * SMM based HPET emulation to provide proper frequency
 764          * setting. The SMM code is initialized with the first HPET
 765          * register access and takes some time to complete. During
 766          * this time the config register reads 0xffffffff. We check
 767          * for max. 1000 loops whether the config register reads a non
 768          * 0xffffffff value to make sure that HPET is up and running
 769          * before we go further. A counting loop is safe, as the HPET
 770          * access takes thousands of CPU cycles. On non SB700 based
 771          * machines this check is only done once and has no side
 772          * effects.
 773          */
 774         for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) {
 775                 if (i == 1000) {
 776                         printk(KERN_WARNING
 777                                "HPET config register value = 0xFFFFFFFF. "
 778                                "Disabling HPET\n");
 779                         goto out_nohpet;
 780                 }
 781         }
 782
 783         if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD)
 784                 goto out_nohpet;
 785
 786         /*
 787          * Read the HPET ID register to retrieve the IRQ routing
 788          * information and the number of channels
 789          */
 790         id = hpet_readl(HPET_ID);
 791
 792 #ifdef CONFIG_HPET_EMULATE_RTC
 793         /*
 794          * The legacy routing mode needs at least two channels, tick timer
 795          * and the rtc emulation channel.
 796          */
 797         if (!(id & HPET_ID_NUMBER))
 798                 goto out_nohpet;
 799 #endif
 800
 801         if (hpet_clocksource_register())
 802                 goto out_nohpet;
 803
 804         if (id & HPET_ID_LEGSUP) {
 805                 hpet_legacy_clockevent_register();
 806                 hpet_msi_capability_lookup(2);
 807                 return 1;
 808         }
 809         hpet_msi_capability_lookup(0);
 810         return 0;
 811
 812 out_nohpet:
 813         hpet_clear_mapping();
 814         boot_hpet_disable = 1;
 815         return 0;
 816 }
 817
 818 /*
 819  * Needs to be late, as the reserve_timer code calls kalloc !
 820  *
 821  * Not a problem on i386 as hpet_enable is called from late_time_init,
 822  * but on x86_64 it is necessary !
 823  */
 824 static __init int hpet_late_init(void)
 825 {
 826         int cpu;
 827
 828         if (boot_hpet_disable)
 829                 return -ENODEV;
 830
 831         if (!hpet_address) {
 832                 if (!force_hpet_address)
 833                         return -ENODEV;
 834
 835                 hpet_address = force_hpet_address;
 836                 hpet_enable();
 837                 if (!hpet_virt_address)
 838                         return -ENODEV;
 839         }
 840
 841         hpet_reserve_platform_timers(hpet_readl(HPET_ID));
 842
 843         for_each_online_cpu(cpu) {
 844                 hpet_cpuhp_notify(NULL, CPU_ONLINE, (void *)(long)cpu);
 845         }
 846
 847         /* This notifier should be called after workqueue is ready */
 848         hotcpu_notifier(hpet_cpuhp_notify, -20);
 849
 850         return 0;
 851 }
 852 fs_initcall(hpet_late_init);
 853
 854 void hpet_disable(void)
 855 {
 856         if (is_hpet_capable()) {
 857                 unsigned long cfg = hpet_readl(HPET_CFG);
 858
 859                 if (hpet_legacy_int_enabled) {
 860                         cfg &= ~HPET_CFG_LEGACY;
 861                         hpet_legacy_int_enabled = 0;
 862                 }
 863                 cfg &= ~HPET_CFG_ENABLE;
 864                 hpet_writel(cfg, HPET_CFG);
 865         }
 866 }
 867
 868 #ifdef CONFIG_HPET_EMULATE_RTC
 869
 870 /* HPET in LegacyReplacement Mode eats up RTC interrupt line. When, HPET
 871  * is enabled, we support RTC interrupt functionality in software.
 872  * RTC has 3 kinds of interrupts:
 873  * 1) Update Interrupt - generate an interrupt, every sec, when RTC clock
 874  *    is updated
 875  * 2) Alarm Interrupt - generate an interrupt at a specific time of day
 876  * 3) Periodic Interrupt - generate periodic interrupt, with frequencies
 877  *    2Hz-8192Hz (2Hz-64Hz for non-root user) (all freqs in powers of 2)
 878  * (1) and (2) above are implemented using polling at a frequency of
 879  * 64 Hz. The exact frequency is a tradeoff between accuracy and interrupt
 880  * overhead. (DEFAULT_RTC_INT_FREQ)
 881  * For (3), we use interrupts at 64Hz or user specified periodic
 882  * frequency, whichever is higher.
 883  */
 884 #include <linux/mc146818rtc.h>
 885 #include <linux/rtc.h>
 886 #include <asm/rtc.h>
 887
 888 #define DEFAULT_RTC_INT_FREQ    64
 889 #define DEFAULT_RTC_SHIFT       6
 890 #define RTC_NUM_INTS            1
 891
 892 static unsigned long hpet_rtc_flags;
 893 static int hpet_prev_update_sec;
 894 static struct rtc_time hpet_alarm_time;
 895 static unsigned long hpet_pie_count;
 896 static unsigned long hpet_t1_cmp;
 897 static unsigned long hpet_default_delta;
 898 static unsigned long hpet_pie_delta;
 899 static unsigned long hpet_pie_limit;
 900
 901 static rtc_irq_handler irq_handler;
 902
 903 /*
 904  * Registers a IRQ handler.
 905  */
 906 int hpet_register_irq_handler(rtc_irq_handler handler)
 907 {
 908         if (!is_hpet_enabled())
 909                 return -ENODEV;
 910         if (irq_handler)
 911                 return -EBUSY;
 912
 913         irq_handler = handler;
 914
 915         return 0;
 916 }
 917 EXPORT_SYMBOL_GPL(hpet_register_irq_handler);
 918
 919 /*
 920  * Deregisters the IRQ handler registered with hpet_register_irq_handler()
 921  * and does cleanup.
 922  */
 923 void hpet_unregister_irq_handler(rtc_irq_handler handler)
 924 {
 925         if (!is_hpet_enabled())
 926                 return;
 927
 928         irq_handler = NULL;
 929         hpet_rtc_flags = 0;
 930 }
 931 EXPORT_SYMBOL_GPL(hpet_unregister_irq_handler);
 932
 933 /*
 934  * Timer 1 for RTC emulation. We use one shot mode, as periodic mode
 935  * is not supported by all HPET implementations for timer 1.
 936  *
 937  * hpet_rtc_timer_init() is called when the rtc is initialized.
 938  */
 939 int hpet_rtc_timer_init(void)
 940 {
 941         unsigned long cfg, cnt, delta, flags;
 942
 943         if (!is_hpet_enabled())
 944                 return 0;
 945
 946         if (!hpet_default_delta) {
 947                 uint64_t clc;
 948
 949                 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
 950                 clc >>= hpet_clockevent.shift + DEFAULT_RTC_SHIFT;
 951                 hpet_default_delta = (unsigned long) clc;
 952         }
 953
 954         if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
 955                 delta = hpet_default_delta;
 956         else
 957                 delta = hpet_pie_delta;
 958
 959         local_irq_save(flags);
 960
 961         cnt = delta + hpet_readl(HPET_COUNTER);
 962         hpet_writel(cnt, HPET_T1_CMP);
 963         hpet_t1_cmp = cnt;
 964
 965         cfg = hpet_readl(HPET_T1_CFG);
 966         cfg &= ~HPET_TN_PERIODIC;
 967         cfg |= HPET_TN_ENABLE | HPET_TN_32BIT;
 968         hpet_writel(cfg, HPET_T1_CFG);
 969
 970         local_irq_restore(flags);
 971
 972         return 1;
 973 }
 974 EXPORT_SYMBOL_GPL(hpet_rtc_timer_init);
 975
 976 /*
 977  * The functions below are called from rtc driver.
 978  * Return 0 if HPET is not being used.
 979  * Otherwise do the necessary changes and return 1.
 980  */
 981 int hpet_mask_rtc_irq_bit(unsigned long bit_mask)
 982 {
 983         if (!is_hpet_enabled())
 984                 return 0;
 985
 986         hpet_rtc_flags &= ~bit_mask;
 987         return 1;
 988 }
 989 EXPORT_SYMBOL_GPL(hpet_mask_rtc_irq_bit);
 990
 991 int hpet_set_rtc_irq_bit(unsigned long bit_mask)
 992 {
 993         unsigned long oldbits = hpet_rtc_flags;
 994
 995         if (!is_hpet_enabled())
 996                 return 0;
 997
 998         hpet_rtc_flags |= bit_mask;
 999
1000         if ((bit_mask & RTC_UIE) && !(oldbits & RTC_UIE))
1001                 hpet_prev_update_sec = -1;
1002
1003         if (!oldbits)
1004                 hpet_rtc_timer_init();
1005
1006         return 1;
1007 }
1008 EXPORT_SYMBOL_GPL(hpet_set_rtc_irq_bit);
1009
1010 int hpet_set_alarm_time(unsigned char hrs, unsigned char min,
1011                         unsigned char sec)
1012 {
1013         if (!is_hpet_enabled())
1014                 return 0;
1015
1016         hpet_alarm_time.tm_hour = hrs;
1017         hpet_alarm_time.tm_min = min;
1018         hpet_alarm_time.tm_sec = sec;
1019
1020         return 1;
1021 }
1022 EXPORT_SYMBOL_GPL(hpet_set_alarm_time);
1023
1024 int hpet_set_periodic_freq(unsigned long freq)
1025 {
1026         uint64_t clc;
1027
1028         if (!is_hpet_enabled())
1029                 return 0;
1030
1031         if (freq <= DEFAULT_RTC_INT_FREQ)
1032                 hpet_pie_limit = DEFAULT_RTC_INT_FREQ / freq;
1033         else {
1034                 clc = (uint64_t) hpet_clockevent.mult * NSEC_PER_SEC;
1035                 do_div(clc, freq);
1036                 clc >>= hpet_clockevent.shift;
1037                 hpet_pie_delta = (unsigned long) clc;
1038         }
1039         return 1;
1040 }
1041 EXPORT_SYMBOL_GPL(hpet_set_periodic_freq);
1042
1043 int hpet_rtc_dropped_irq(void)
1044 {
1045         return is_hpet_enabled();
1046 }
1047 EXPORT_SYMBOL_GPL(hpet_rtc_dropped_irq);
1048
1049 static void hpet_rtc_timer_reinit(void)
1050 {
1051         unsigned long cfg, delta;
1052         int lost_ints = -1;
1053
1054         if (unlikely(!hpet_rtc_flags)) {
1055                 cfg = hpet_readl(HPET_T1_CFG);
1056                 cfg &= ~HPET_TN_ENABLE;
1057                 hpet_writel(cfg, HPET_T1_CFG);
1058                 return;
1059         }
1060
1061         if (!(hpet_rtc_flags & RTC_PIE) || hpet_pie_limit)
1062                 delta = hpet_default_delta;
1063         else
1064                 delta = hpet_pie_delta;
1065
1066         /*
1067          * Increment the comparator value until we are ahead of the
1068          * current count.
1069          */
1070         do {
1071                 hpet_t1_cmp += delta;
1072                 hpet_writel(hpet_t1_cmp, HPET_T1_CMP);
1073                 lost_ints++;
1074         } while ((long)(hpet_readl(HPET_COUNTER) - hpet_t1_cmp) > 0);
1075
1076         if (lost_ints) {
1077                 if (hpet_rtc_flags & RTC_PIE)
1078                         hpet_pie_count += lost_ints;
1079                 if (printk_ratelimit())
1080                         printk(KERN_WARNING "hpet1: lost %d rtc interrupts\n",
1081                                 lost_ints);
1082         }
1083 }
1084
1085 irqreturn_t hpet_rtc_interrupt(int irq, void *dev_id)
1086 {
1087         struct rtc_time curr_time;
1088         unsigned long rtc_int_flag = 0;
1089
1090         hpet_rtc_timer_reinit();
1091         memset(&curr_time, 0, sizeof(struct rtc_time));
1092
1093         if (hpet_rtc_flags & (RTC_UIE | RTC_AIE))
1094                 get_rtc_time(&curr_time);
1095
1096         if (hpet_rtc_flags & RTC_UIE &&
1097             curr_time.tm_sec != hpet_prev_update_sec) {
1098                 if (hpet_prev_update_sec >= 0)
1099                         rtc_int_flag = RTC_UF;
1100                 hpet_prev_update_sec = curr_time.tm_sec;
1101         }
1102
1103         if (hpet_rtc_flags & RTC_PIE &&
1104             ++hpet_pie_count >= hpet_pie_limit) {
1105                 rtc_int_flag |= RTC_PF;
1106                 hpet_pie_count = 0;
1107         }
1108
1109         if (hpet_rtc_flags & RTC_AIE &&
1110             (curr_time.tm_sec == hpet_alarm_time.tm_sec) &&
1111             (curr_time.tm_min == hpet_alarm_time.tm_min) &&
1112             (curr_time.tm_hour == hpet_alarm_time.tm_hour))
1113                         rtc_int_flag |= RTC_AF;
1114
1115         if (rtc_int_flag) {
1116                 rtc_int_flag |= (RTC_IRQF | (RTC_NUM_INTS << 8));
1117                 if (irq_handler)
1118                         irq_handler(rtc_int_flag, dev_id);
1119         }
1120         return IRQ_HANDLED;
1121 }
1122 EXPORT_SYMBOL_GPL(hpet_rtc_interrupt);
1123 #endif