Merge branches 'x86/apic', 'x86/cleanups', 'x86/cpufeature', 'x86/crashdump', 'x86...
[linux-2.6] / arch / x86 / kernel / microcode_intel.c
1 /*
2  *      Intel CPU Microcode Update Driver for Linux
3  *
4  *      Copyright (C) 2000-2006 Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
5  *                    2006      Shaohua Li <shaohua.li@intel.com>
6  *
7  *      This driver allows to upgrade microcode on Intel processors
8  *      belonging to IA-32 family - PentiumPro, Pentium II,
9  *      Pentium III, Xeon, Pentium 4, etc.
10  *
11  *      Reference: Section 8.11 of Volume 3a, IA-32 Intel? Architecture
12  *      Software Developer's Manual
13  *      Order Number 253668 or free download from:
14  *
15  *      http://developer.intel.com/design/pentium4/manuals/253668.htm
16  *
17  *      For more information, go to http://www.urbanmyth.org/microcode
18  *
19  *      This program is free software; you can redistribute it and/or
20  *      modify it under the terms of the GNU General Public License
21  *      as published by the Free Software Foundation; either version
22  *      2 of the License, or (at your option) any later version.
23  *
24  *      1.0     16 Feb 2000, Tigran Aivazian <tigran@sco.com>
25  *              Initial release.
26  *      1.01    18 Feb 2000, Tigran Aivazian <tigran@sco.com>
27  *              Added read() support + cleanups.
28  *      1.02    21 Feb 2000, Tigran Aivazian <tigran@sco.com>
29  *              Added 'device trimming' support. open(O_WRONLY) zeroes
30  *              and frees the saved copy of applied microcode.
31  *      1.03    29 Feb 2000, Tigran Aivazian <tigran@sco.com>
32  *              Made to use devfs (/dev/cpu/microcode) + cleanups.
33  *      1.04    06 Jun 2000, Simon Trimmer <simon@veritas.com>
34  *              Added misc device support (now uses both devfs and misc).
35  *              Added MICROCODE_IOCFREE ioctl to clear memory.
36  *      1.05    09 Jun 2000, Simon Trimmer <simon@veritas.com>
37  *              Messages for error cases (non Intel & no suitable microcode).
38  *      1.06    03 Aug 2000, Tigran Aivazian <tigran@veritas.com>
39  *              Removed ->release(). Removed exclusive open and status bitmap.
40  *              Added microcode_rwsem to serialize read()/write()/ioctl().
41  *              Removed global kernel lock usage.
42  *      1.07    07 Sep 2000, Tigran Aivazian <tigran@veritas.com>
43  *              Write 0 to 0x8B msr and then cpuid before reading revision,
44  *              so that it works even if there were no update done by the
45  *              BIOS. Otherwise, reading from 0x8B gives junk (which happened
46  *              to be 0 on my machine which is why it worked even when I
47  *              disabled update by the BIOS)
48  *              Thanks to Eric W. Biederman <ebiederman@lnxi.com> for the fix.
49  *      1.08    11 Dec 2000, Richard Schaal <richard.schaal@intel.com> and
50  *                           Tigran Aivazian <tigran@veritas.com>
51  *              Intel Pentium 4 processor support and bugfixes.
52  *      1.09    30 Oct 2001, Tigran Aivazian <tigran@veritas.com>
53  *              Bugfix for HT (Hyper-Threading) enabled processors
54  *              whereby processor resources are shared by all logical processors
55  *              in a single CPU package.
56  *      1.10    28 Feb 2002 Asit K Mallick <asit.k.mallick@intel.com> and
57  *              Tigran Aivazian <tigran@veritas.com>,
58  *              Serialize updates as required on HT processors due to
59  *              speculative nature of implementation.
60  *      1.11    22 Mar 2002 Tigran Aivazian <tigran@veritas.com>
61  *              Fix the panic when writing zero-length microcode chunk.
62  *      1.12    29 Sep 2003 Nitin Kamble <nitin.a.kamble@intel.com>,
63  *              Jun Nakajima <jun.nakajima@intel.com>
64  *              Support for the microcode updates in the new format.
65  *      1.13    10 Oct 2003 Tigran Aivazian <tigran@veritas.com>
66  *              Removed ->read() method and obsoleted MICROCODE_IOCFREE ioctl
67  *              because we no longer hold a copy of applied microcode
68  *              in kernel memory.
69  *      1.14    25 Jun 2004 Tigran Aivazian <tigran@veritas.com>
70  *              Fix sigmatch() macro to handle old CPUs with pf == 0.
71  *              Thanks to Stuart Swales for pointing out this bug.
72  */
73 #include <linux/capability.h>
74 #include <linux/kernel.h>
75 #include <linux/init.h>
76 #include <linux/sched.h>
77 #include <linux/smp_lock.h>
78 #include <linux/cpumask.h>
79 #include <linux/module.h>
80 #include <linux/slab.h>
81 #include <linux/vmalloc.h>
82 #include <linux/miscdevice.h>
83 #include <linux/spinlock.h>
84 #include <linux/mm.h>
85 #include <linux/fs.h>
86 #include <linux/mutex.h>
87 #include <linux/cpu.h>
88 #include <linux/firmware.h>
89 #include <linux/platform_device.h>
90
91 #include <asm/msr.h>
92 #include <asm/uaccess.h>
93 #include <asm/processor.h>
94 #include <asm/microcode.h>
95
96 MODULE_DESCRIPTION("Microcode Update Driver");
97 MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
98 MODULE_LICENSE("GPL");
99
100 struct microcode_header_intel {
101         unsigned int            hdrver;
102         unsigned int            rev;
103         unsigned int            date;
104         unsigned int            sig;
105         unsigned int            cksum;
106         unsigned int            ldrver;
107         unsigned int            pf;
108         unsigned int            datasize;
109         unsigned int            totalsize;
110         unsigned int            reserved[3];
111 };
112
113 struct microcode_intel {
114         struct microcode_header_intel hdr;
115         unsigned int            bits[0];
116 };
117
118 /* microcode format is extended from prescott processors */
119 struct extended_signature {
120         unsigned int            sig;
121         unsigned int            pf;
122         unsigned int            cksum;
123 };
124
125 struct extended_sigtable {
126         unsigned int            count;
127         unsigned int            cksum;
128         unsigned int            reserved[3];
129         struct extended_signature sigs[0];
130 };
131
132 #define DEFAULT_UCODE_DATASIZE  (2000)
133 #define MC_HEADER_SIZE          (sizeof(struct microcode_header_intel))
134 #define DEFAULT_UCODE_TOTALSIZE (DEFAULT_UCODE_DATASIZE + MC_HEADER_SIZE)
135 #define EXT_HEADER_SIZE         (sizeof(struct extended_sigtable))
136 #define EXT_SIGNATURE_SIZE      (sizeof(struct extended_signature))
137 #define DWSIZE                  (sizeof(u32))
138 #define get_totalsize(mc) \
139         (((struct microcode_intel *)mc)->hdr.totalsize ? \
140          ((struct microcode_intel *)mc)->hdr.totalsize : \
141          DEFAULT_UCODE_TOTALSIZE)
142
143 #define get_datasize(mc) \
144         (((struct microcode_intel *)mc)->hdr.datasize ? \
145          ((struct microcode_intel *)mc)->hdr.datasize : DEFAULT_UCODE_DATASIZE)
146
147 #define sigmatch(s1, s2, p1, p2) \
148         (((s1) == (s2)) && (((p1) & (p2)) || (((p1) == 0) && ((p2) == 0))))
149
150 #define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
151
152 /* serialize access to the physical write to MSR 0x79 */
153 static DEFINE_SPINLOCK(microcode_update_lock);
154
155 static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
156 {
157         struct cpuinfo_x86 *c = &cpu_data(cpu_num);
158         unsigned long flags;
159         unsigned int val[2];
160
161         memset(csig, 0, sizeof(*csig));
162
163         if (c->x86_vendor != X86_VENDOR_INTEL || c->x86 < 6 ||
164             cpu_has(c, X86_FEATURE_IA64)) {
165                 printk(KERN_ERR "microcode: CPU%d not a capable Intel "
166                         "processor\n", cpu_num);
167                 return -1;
168         }
169
170         csig->sig = cpuid_eax(0x00000001);
171
172         if ((c->x86_model >= 5) || (c->x86 > 6)) {
173                 /* get processor flags from MSR 0x17 */
174                 rdmsr(MSR_IA32_PLATFORM_ID, val[0], val[1]);
175                 csig->pf = 1 << ((val[1] >> 18) & 7);
176         }
177
178         /* serialize access to the physical write to MSR 0x79 */
179         spin_lock_irqsave(&microcode_update_lock, flags);
180
181         wrmsr(MSR_IA32_UCODE_REV, 0, 0);
182         /* see notes above for revision 1.07.  Apparent chip bug */
183         sync_core();
184         /* get the current revision from MSR 0x8B */
185         rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
186         spin_unlock_irqrestore(&microcode_update_lock, flags);
187
188         pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
189                         csig->sig, csig->pf, csig->rev);
190
191         return 0;
192 }
193
194 static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf)
195 {
196         return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1;
197 }
198
199 static inline int 
200 update_match_revision(struct microcode_header_intel *mc_header, int rev)
201 {
202         return (mc_header->rev <= rev) ? 0 : 1;
203 }
204
205 static int microcode_sanity_check(void *mc)
206 {
207         struct microcode_header_intel *mc_header = mc;
208         struct extended_sigtable *ext_header = NULL;
209         struct extended_signature *ext_sig;
210         unsigned long total_size, data_size, ext_table_size;
211         int sum, orig_sum, ext_sigcount = 0, i;
212
213         total_size = get_totalsize(mc_header);
214         data_size = get_datasize(mc_header);
215         if (data_size + MC_HEADER_SIZE > total_size) {
216                 printk(KERN_ERR "microcode: error! "
217                         "Bad data size in microcode data file\n");
218                 return -EINVAL;
219         }
220
221         if (mc_header->ldrver != 1 || mc_header->hdrver != 1) {
222                 printk(KERN_ERR "microcode: error! "
223                         "Unknown microcode update format\n");
224                 return -EINVAL;
225         }
226         ext_table_size = total_size - (MC_HEADER_SIZE + data_size);
227         if (ext_table_size) {
228                 if ((ext_table_size < EXT_HEADER_SIZE)
229                  || ((ext_table_size - EXT_HEADER_SIZE) % EXT_SIGNATURE_SIZE)) {
230                         printk(KERN_ERR "microcode: error! "
231                                 "Small exttable size in microcode data file\n");
232                         return -EINVAL;
233                 }
234                 ext_header = mc + MC_HEADER_SIZE + data_size;
235                 if (ext_table_size != exttable_size(ext_header)) {
236                         printk(KERN_ERR "microcode: error! "
237                                 "Bad exttable size in microcode data file\n");
238                         return -EFAULT;
239                 }
240                 ext_sigcount = ext_header->count;
241         }
242
243         /* check extended table checksum */
244         if (ext_table_size) {
245                 int ext_table_sum = 0;
246                 int *ext_tablep = (int *)ext_header;
247
248                 i = ext_table_size / DWSIZE;
249                 while (i--)
250                         ext_table_sum += ext_tablep[i];
251                 if (ext_table_sum) {
252                         printk(KERN_WARNING "microcode: aborting, "
253                                 "bad extended signature table checksum\n");
254                         return -EINVAL;
255                 }
256         }
257
258         /* calculate the checksum */
259         orig_sum = 0;
260         i = (MC_HEADER_SIZE + data_size) / DWSIZE;
261         while (i--)
262                 orig_sum += ((int *)mc)[i];
263         if (orig_sum) {
264                 printk(KERN_ERR "microcode: aborting, bad checksum\n");
265                 return -EINVAL;
266         }
267         if (!ext_table_size)
268                 return 0;
269         /* check extended signature checksum */
270         for (i = 0; i < ext_sigcount; i++) {
271                 ext_sig = (void *)ext_header + EXT_HEADER_SIZE +
272                           EXT_SIGNATURE_SIZE * i;
273                 sum = orig_sum
274                         - (mc_header->sig + mc_header->pf + mc_header->cksum)
275                         + (ext_sig->sig + ext_sig->pf + ext_sig->cksum);
276                 if (sum) {
277                         printk(KERN_ERR "microcode: aborting, bad checksum\n");
278                         return -EINVAL;
279                 }
280         }
281         return 0;
282 }
283
284 /*
285  * return 0 - no update found
286  * return 1 - found update
287  */
288 static int
289 get_matching_microcode(struct cpu_signature *cpu_sig, void *mc, int rev)
290 {
291         struct microcode_header_intel *mc_header = mc;
292         struct extended_sigtable *ext_header;
293         unsigned long total_size = get_totalsize(mc_header);
294         int ext_sigcount, i;
295         struct extended_signature *ext_sig;
296
297         if (!update_match_revision(mc_header, rev))
298                 return 0;
299
300         if (update_match_cpu(cpu_sig, mc_header->sig, mc_header->pf))
301                 return 1;
302
303         /* Look for ext. headers: */
304         if (total_size <= get_datasize(mc_header) + MC_HEADER_SIZE)
305                 return 0;
306
307         ext_header = mc + get_datasize(mc_header) + MC_HEADER_SIZE;
308         ext_sigcount = ext_header->count;
309         ext_sig = (void *)ext_header + EXT_HEADER_SIZE;
310
311         for (i = 0; i < ext_sigcount; i++) {
312                 if (update_match_cpu(cpu_sig, ext_sig->sig, ext_sig->pf))
313                         return 1;
314                 ext_sig++;
315         }
316         return 0;
317 }
318
319 static void apply_microcode(int cpu)
320 {
321         unsigned long flags;
322         unsigned int val[2];
323         int cpu_num = raw_smp_processor_id();
324         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
325         struct microcode_intel *mc_intel = uci->mc;
326
327         /* We should bind the task to the CPU */
328         BUG_ON(cpu_num != cpu);
329
330         if (mc_intel == NULL)
331                 return;
332
333         /* serialize access to the physical write to MSR 0x79 */
334         spin_lock_irqsave(&microcode_update_lock, flags);
335
336         /* write microcode via MSR 0x79 */
337         wrmsr(MSR_IA32_UCODE_WRITE,
338               (unsigned long) mc_intel->bits,
339               (unsigned long) mc_intel->bits >> 16 >> 16);
340         wrmsr(MSR_IA32_UCODE_REV, 0, 0);
341
342         /* see notes above for revision 1.07.  Apparent chip bug */
343         sync_core();
344
345         /* get the current revision from MSR 0x8B */
346         rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
347
348         spin_unlock_irqrestore(&microcode_update_lock, flags);
349         if (val[1] != mc_intel->hdr.rev) {
350                 printk(KERN_ERR "microcode: CPU%d update from revision "
351                         "0x%x to 0x%x failed\n", cpu_num, uci->cpu_sig.rev, val[1]);
352                 return;
353         }
354         printk(KERN_INFO "microcode: CPU%d updated from revision "
355                "0x%x to 0x%x, date = %04x-%02x-%02x \n",
356                 cpu_num, uci->cpu_sig.rev, val[1],
357                 mc_intel->hdr.date & 0xffff,
358                 mc_intel->hdr.date >> 24,
359                 (mc_intel->hdr.date >> 16) & 0xff);
360         uci->cpu_sig.rev = val[1];
361 }
362
363 static int generic_load_microcode(int cpu, void *data, size_t size,
364                 int (*get_ucode_data)(void *, const void *, size_t))
365 {
366         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
367         u8 *ucode_ptr = data, *new_mc = NULL, *mc;
368         int new_rev = uci->cpu_sig.rev;
369         unsigned int leftover = size;
370
371         while (leftover) {
372                 struct microcode_header_intel mc_header;
373                 unsigned int mc_size;
374
375                 if (get_ucode_data(&mc_header, ucode_ptr, sizeof(mc_header)))
376                         break;
377
378                 mc_size = get_totalsize(&mc_header);
379                 if (!mc_size || mc_size > leftover) {
380                         printk(KERN_ERR "microcode: error!"
381                                         "Bad data in microcode data file\n");
382                         break;
383                 }
384
385                 mc = vmalloc(mc_size);
386                 if (!mc)
387                         break;
388
389                 if (get_ucode_data(mc, ucode_ptr, mc_size) ||
390                     microcode_sanity_check(mc) < 0) {
391                         vfree(mc);
392                         break;
393                 }
394
395                 if (get_matching_microcode(&uci->cpu_sig, mc, new_rev)) {
396                         if (new_mc)
397                                 vfree(new_mc);
398                         new_rev = mc_header.rev;
399                         new_mc  = mc;
400                 } else
401                         vfree(mc);
402
403                 ucode_ptr += mc_size;
404                 leftover  -= mc_size;
405         }
406
407         if (new_mc) {
408                 if (!leftover) {
409                         if (uci->mc)
410                                 vfree(uci->mc);
411                         uci->mc = (struct microcode_intel *)new_mc;
412                         pr_debug("microcode: CPU%d found a matching microcode update with"
413                                  " version 0x%x (current=0x%x)\n",
414                                 cpu, new_rev, uci->cpu_sig.rev);
415                 } else
416                         vfree(new_mc);
417         }
418
419         return (int)leftover;
420 }
421
422 static int get_ucode_fw(void *to, const void *from, size_t n)
423 {
424         memcpy(to, from, n);
425         return 0;
426 }
427
428 static int request_microcode_fw(int cpu, struct device *device)
429 {
430         char name[30];
431         struct cpuinfo_x86 *c = &cpu_data(cpu);
432         const struct firmware *firmware;
433         int ret;
434
435         /* We should bind the task to the CPU */
436         BUG_ON(cpu != raw_smp_processor_id());
437         sprintf(name, "intel-ucode/%02x-%02x-%02x",
438                 c->x86, c->x86_model, c->x86_mask);
439         ret = request_firmware(&firmware, name, device);
440         if (ret) {
441                 pr_debug("microcode: data file %s load failed\n", name);
442                 return ret;
443         }
444
445         ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size,
446                         &get_ucode_fw);
447
448         release_firmware(firmware);
449
450         return ret;
451 }
452
453 static int get_ucode_user(void *to, const void *from, size_t n)
454 {
455         return copy_from_user(to, from, n);
456 }
457
458 static int request_microcode_user(int cpu, const void __user *buf, size_t size)
459 {
460         /* We should bind the task to the CPU */
461         BUG_ON(cpu != raw_smp_processor_id());
462
463         return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user);
464 }
465
466 static void microcode_fini_cpu(int cpu)
467 {
468         struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
469
470         vfree(uci->mc);
471         uci->mc = NULL;
472 }
473
474 static struct microcode_ops microcode_intel_ops = {
475         .request_microcode_user           = request_microcode_user,
476         .request_microcode_fw             = request_microcode_fw,
477         .collect_cpu_info                 = collect_cpu_info,
478         .apply_microcode                  = apply_microcode,
479         .microcode_fini_cpu               = microcode_fini_cpu,
480 };
481
482 struct microcode_ops * __init init_intel_microcode(void)
483 {
484         return &microcode_intel_ops;
485 }
486