[PATCH] USB: Fix regression in core/devio.c
[linux-2.6] / drivers / scsi / sun3_scsi_vme.c
1  /*
2  * Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
3  *
4  * Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
5  *
6  * VME support added by Sam Creasey
7  *
8  * Adapted from sun3_scsi.c -- see there for other headers
9  *
10  * TODO: modify this driver to support multiple Sun3 SCSI VME boards
11  *
12  */
13
14 #define AUTOSENSE
15
16 #include <linux/types.h>
17 #include <linux/stddef.h>
18 #include <linux/ctype.h>
19 #include <linux/delay.h>
20
21 #include <linux/module.h>
22 #include <linux/signal.h>
23 #include <linux/sched.h>
24 #include <linux/ioport.h>
25 #include <linux/init.h>
26 #include <linux/blkdev.h>
27
28 #include <asm/io.h>
29 #include <asm/system.h>
30
31 #include <asm/sun3ints.h>
32 #include <asm/dvma.h>
33 #include <asm/idprom.h>
34 #include <asm/machines.h>
35
36 #define SUN3_SCSI_VME
37
38 #undef SUN3_SCSI_DEBUG
39
40 /* dma on! */
41 #define REAL_DMA
42
43 #include "scsi.h"
44 #include <scsi/scsi_host.h>
45 #include "sun3_scsi.h"
46 #include "NCR5380.h"
47
48 extern int sun3_map_test(unsigned long, char *);
49
50 #define USE_WRAPPER
51 /*#define RESET_BOOT */
52 #define DRIVER_SETUP
53
54 #define NDEBUG 0
55
56 /*
57  * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
58  */
59 #ifdef BUG
60 #undef RESET_BOOT
61 #undef DRIVER_SETUP
62 #endif
63
64 /* #define SUPPORT_TAGS */
65
66 //#define       ENABLE_IRQ()    enable_irq( SUN3_VEC_VMESCSI0 ); 
67 #define ENABLE_IRQ()
68
69
70 static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp);
71 static inline unsigned char sun3scsi_read(int reg);
72 static inline void sun3scsi_write(int reg, int value);
73
74 static int setup_can_queue = -1;
75 module_param(setup_can_queue, int, 0);
76 static int setup_cmd_per_lun = -1;
77 module_param(setup_cmd_per_lun, int, 0);
78 static int setup_sg_tablesize = -1;
79 module_param(setup_sg_tablesize, int, 0);
80 #ifdef SUPPORT_TAGS
81 static int setup_use_tagged_queuing = -1;
82 module_param(setup_use_tagged_queuing, int, 0);
83 #endif
84 static int setup_hostid = -1;
85 module_param(setup_hostid, int, 0);
86
87 static Scsi_Cmnd *sun3_dma_setup_done = NULL;
88
89 #define AFTER_RESET_DELAY       (HZ/2)
90
91 /* ms to wait after hitting dma regs */
92 #define SUN3_DMA_DELAY 10
93
94 /* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
95 #define SUN3_DVMA_BUFSIZE 0xe000
96
97 /* minimum number of bytes to do dma on */
98 #define SUN3_DMA_MINSIZE 128
99
100 static volatile unsigned char *sun3_scsi_regp;
101 static volatile struct sun3_dma_regs *dregs;
102 #ifdef OLDDMA
103 static unsigned char *dmabuf = NULL; /* dma memory buffer */
104 #endif
105 static unsigned char *sun3_dma_orig_addr = NULL;
106 static unsigned long sun3_dma_orig_count = 0;
107 static int sun3_dma_active = 0;
108 static unsigned long last_residual = 0;
109
110 /*
111  * NCR 5380 register access functions
112  */
113
114 static inline unsigned char sun3scsi_read(int reg)
115 {
116         return( sun3_scsi_regp[reg] );
117 }
118
119 static inline void sun3scsi_write(int reg, int value)
120 {
121         sun3_scsi_regp[reg] = value;
122 }
123
124 /*
125  * XXX: status debug
126  */
127 static struct Scsi_Host *default_instance;
128
129 /*
130  * Function : int sun3scsi_detect(Scsi_Host_Template * tpnt)
131  *
132  * Purpose : initializes mac NCR5380 driver based on the
133  *      command line / compile time port and irq definitions.
134  *
135  * Inputs : tpnt - template for this SCSI adapter.
136  *
137  * Returns : 1 if a host adapter was found, 0 if not.
138  *
139  */
140  
141 static int sun3scsi_detect(Scsi_Host_Template * tpnt)
142 {
143         unsigned long ioaddr, irq = 0;
144         static int called = 0;
145         struct Scsi_Host *instance;
146         int i;
147         unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI, 
148                                    IOBASE_SUN3_VMESCSI + 0x4000,
149                                    0 };
150         unsigned long vecs[3] = { SUN3_VEC_VMESCSI0,
151                                   SUN3_VEC_VMESCSI1,
152                                   0 };
153         /* check that this machine has an onboard 5380 */
154         switch(idprom->id_machtype) {
155         case SM_SUN3|SM_3_160:
156         case SM_SUN3|SM_3_260:
157                 break;
158
159         default:
160                 return 0;
161         }
162
163         if(called)
164                 return 0;
165
166         tpnt->proc_name = "Sun3 5380 VME SCSI";
167
168         /* setup variables */
169         tpnt->can_queue =
170                 (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
171         tpnt->cmd_per_lun =
172                 (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
173         tpnt->sg_tablesize = 
174                 (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
175         
176         if (setup_hostid >= 0)
177                 tpnt->this_id = setup_hostid;
178         else {
179                 /* use 7 as default */
180                 tpnt->this_id = 7;
181         }
182         
183         ioaddr = 0;
184         for(i = 0; addrs[i] != 0; i++) {
185                 unsigned char x;
186                 
187                 ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE,
188                                                      SUN3_PAGE_TYPE_VME16);
189                 irq = vecs[i];
190                 sun3_scsi_regp = (unsigned char *)ioaddr;
191                 
192                 dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
193                 
194                 if(sun3_map_test((unsigned long)dregs, &x)) {
195                         unsigned short oldcsr;
196
197                         oldcsr = dregs->csr;
198                         dregs->csr = 0;
199                         udelay(SUN3_DMA_DELAY);
200                         if(dregs->csr == 0x1400)
201                                 break;
202                         
203                         dregs->csr = oldcsr;
204                 }
205
206                 iounmap((void *)ioaddr);
207                 ioaddr = 0;
208         }
209
210         if(!ioaddr)
211                 return 0;
212         
213 #ifdef SUPPORT_TAGS
214         if (setup_use_tagged_queuing < 0)
215                 setup_use_tagged_queuing = USE_TAGGED_QUEUING;
216 #endif
217
218         instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
219         if(instance == NULL)
220                 return 0;
221                 
222         default_instance = instance;
223
224         instance->io_port = (unsigned long) ioaddr;
225         instance->irq = irq;
226
227         NCR5380_init(instance, 0);
228
229         instance->n_io_port = 32;
230
231         ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
232
233         if (request_irq(instance->irq, scsi_sun3_intr,
234                              0, "Sun3SCSI-5380VME", NULL)) {
235 #ifndef REAL_DMA
236                 printk("scsi%d: IRQ%d not free, interrupts disabled\n",
237                        instance->host_no, instance->irq);
238                 instance->irq = SCSI_IRQ_NONE;
239 #else
240                 printk("scsi%d: IRQ%d not free, bailing out\n",
241                        instance->host_no, instance->irq);
242                 return 0;
243 #endif
244         }
245
246         printk("scsi%d: Sun3 5380 VME at port %lX irq", instance->host_no, instance->io_port);
247         if (instance->irq == SCSI_IRQ_NONE)
248                 printk ("s disabled");
249         else
250                 printk (" %d", instance->irq);
251         printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
252                instance->can_queue, instance->cmd_per_lun,
253                SUN3SCSI_PUBLIC_RELEASE);
254         printk("\nscsi%d:", instance->host_no);
255         NCR5380_print_options(instance);
256         printk("\n");
257
258         dregs->csr = 0;
259         udelay(SUN3_DMA_DELAY);
260         dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
261         udelay(SUN3_DMA_DELAY);
262         dregs->fifo_count = 0;
263         dregs->fifo_count_hi = 0;
264         dregs->dma_addr_hi = 0;
265         dregs->dma_addr_lo = 0;
266         dregs->dma_count_hi = 0;
267         dregs->dma_count_lo = 0;
268
269         dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
270
271         called = 1;
272
273 #ifdef RESET_BOOT
274         sun3_scsi_reset_boot(instance);
275 #endif
276
277         return 1;
278 }
279
280 int sun3scsi_release (struct Scsi_Host *shpnt)
281 {
282         if (shpnt->irq != SCSI_IRQ_NONE)
283                 free_irq (shpnt->irq, NULL);
284
285         iounmap((void *)sun3_scsi_regp);
286
287         return 0;
288 }
289
290 #ifdef RESET_BOOT
291 /*
292  * Our 'bus reset on boot' function
293  */
294
295 static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
296 {
297         unsigned long end;
298
299         NCR5380_local_declare();
300         NCR5380_setup(instance);
301         
302         /*
303          * Do a SCSI reset to clean up the bus during initialization. No
304          * messing with the queues, interrupts, or locks necessary here.
305          */
306
307         printk( "Sun3 SCSI: resetting the SCSI bus..." );
308
309         /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
310 //              sun3_disable_irq( IRQ_SUN3_SCSI );
311
312         /* get in phase */
313         NCR5380_write( TARGET_COMMAND_REG,
314                       PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
315
316         /* assert RST */
317         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
318
319         /* The min. reset hold time is 25us, so 40us should be enough */
320         udelay( 50 );
321
322         /* reset RST and interrupt */
323         NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
324         NCR5380_read( RESET_PARITY_INTERRUPT_REG );
325
326         for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
327                 barrier();
328
329         /* switch on SCSI IRQ again */
330 //              sun3_enable_irq( IRQ_SUN3_SCSI );
331
332         printk( " done\n" );
333 }
334 #endif
335
336 static const char * sun3scsi_info (struct Scsi_Host *spnt) {
337     return "";
338 }
339
340 // safe bits for the CSR
341 #define CSR_GOOD 0x060f
342
343 static irqreturn_t scsi_sun3_intr(int irq, void *dummy, struct pt_regs *fp)
344 {
345         unsigned short csr = dregs->csr;
346         int handled = 0;
347
348         dregs->csr &= ~CSR_DMA_ENABLE;
349
350
351 #ifdef SUN3_SCSI_DEBUG
352         printk("scsi_intr csr %x\n", csr);
353 #endif
354
355         if(csr & ~CSR_GOOD) {
356                 if(csr & CSR_DMA_BUSERR) {
357                         printk("scsi%d: bus error in dma\n", default_instance->host_no);
358 #ifdef SUN3_SCSI_DEBUG
359                         printk("scsi: residual %x count %x addr %p dmaaddr %x\n", 
360                                dregs->fifo_count,
361                                dregs->dma_count_lo | (dregs->dma_count_hi << 16),
362                                sun3_dma_orig_addr,
363                                dregs->dma_addr_lo | (dregs->dma_addr_hi << 16));
364 #endif
365                 }
366
367                 if(csr & CSR_DMA_CONFLICT) {
368                         printk("scsi%d: dma conflict\n", default_instance->host_no);
369                 }
370                 handled = 1;
371         }
372
373         if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
374                 NCR5380_intr(irq, dummy, fp);
375                 handled = 1;
376         }
377
378         return IRQ_RETVAL(handled);
379 }
380
381 /*
382  * Debug stuff - to be called on NMI, or sysrq key. Use at your own risk; 
383  * reentering NCR5380_print_status seems to have ugly side effects
384  */
385
386 /* this doesn't seem to get used at all -- sam */
387 #if 0
388 void sun3_sun3_debug (void)
389 {
390         unsigned long flags;
391         NCR5380_local_declare();
392
393         if (default_instance) {
394                         local_irq_save(flags);
395                         NCR5380_print_status(default_instance);
396                         local_irq_restore(flags);
397         }
398 }
399 #endif
400
401
402 /* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
403 static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
404 {
405         void *addr;
406
407         if(sun3_dma_orig_addr != NULL)
408                 dvma_unmap(sun3_dma_orig_addr);
409
410 //      addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
411         addr = (void *)dvma_map_vme((unsigned long) data, count);
412                 
413         sun3_dma_orig_addr = addr;
414         sun3_dma_orig_count = count;
415         
416 #ifdef SUN3_SCSI_DEBUG
417         printk("scsi: dma_setup addr %p count %x\n", addr, count);
418 #endif
419
420 //      dregs->fifo_count = 0;
421 #if 0   
422         /* reset fifo */
423         dregs->csr &= ~CSR_FIFO;
424         dregs->csr |= CSR_FIFO;
425 #endif  
426         /* set direction */
427         if(write_flag)
428                 dregs->csr |= CSR_SEND;
429         else
430                 dregs->csr &= ~CSR_SEND;
431         
432         /* reset fifo */
433 //      dregs->csr &= ~CSR_FIFO;
434 //      dregs->csr |= CSR_FIFO;
435
436         dregs->csr |= CSR_PACK_ENABLE;
437
438         dregs->dma_addr_hi = ((unsigned long)addr >> 16);
439         dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
440         
441         dregs->dma_count_hi = 0;
442         dregs->dma_count_lo = 0;
443         dregs->fifo_count_hi = 0;
444         dregs->fifo_count = 0;
445                 
446 #ifdef SUN3_SCSI_DEBUG
447         printk("scsi: dma_setup done csr %x\n", dregs->csr);
448 #endif
449         return count;
450
451 }
452
453 static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
454 {
455         return last_residual;
456 }
457
458 static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted, Scsi_Cmnd *cmd,
459                                     int write_flag)
460 {
461         if(cmd->request->flags & REQ_CMD)
462                 return wanted;
463         else
464                 return 0;
465 }
466
467 static int sun3scsi_dma_start(unsigned long count, char *data)
468 {
469         
470         unsigned short csr;
471
472         csr = dregs->csr;
473 #ifdef SUN3_SCSI_DEBUG
474         printk("scsi: dma_start data %p count %x csr %x fifo %x\n", data, count, csr, dregs->fifo_count);
475 #endif
476         
477         dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
478         dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
479
480         dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
481         dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
482
483 //      if(!(csr & CSR_DMA_ENABLE))
484 //              dregs->csr |= CSR_DMA_ENABLE;
485
486         return 0;
487 }
488
489 /* clean up after our dma is done */
490 static int sun3scsi_dma_finish(int write_flag)
491 {
492         unsigned short fifo;
493         int ret = 0;
494         
495         sun3_dma_active = 0;
496
497         dregs->csr &= ~CSR_DMA_ENABLE;
498         
499         fifo = dregs->fifo_count;
500         if(write_flag) {
501                 if((fifo > 0) && (fifo < sun3_dma_orig_count))
502                         fifo++;
503         }
504
505         last_residual = fifo;
506 #ifdef SUN3_SCSI_DEBUG
507         printk("scsi: residual %x total %x\n", fifo, sun3_dma_orig_count);
508 #endif
509         /* empty bytes from the fifo which didn't make it */
510         if((!write_flag) && (dregs->csr & CSR_LEFT)) {
511                 unsigned char *vaddr;
512
513 #ifdef SUN3_SCSI_DEBUG
514                 printk("scsi: got left over bytes\n");
515 #endif
516
517                 vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
518                 
519                 vaddr += (sun3_dma_orig_count - fifo);
520                 vaddr--;
521                 
522                 switch(dregs->csr & CSR_LEFT) {
523                 case CSR_LEFT_3:
524                         *vaddr = (dregs->bpack_lo & 0xff00) >> 8;
525                         vaddr--;
526                         
527                 case CSR_LEFT_2:
528                         *vaddr = (dregs->bpack_hi & 0x00ff);
529                         vaddr--;
530                         
531                 case CSR_LEFT_1:
532                         *vaddr = (dregs->bpack_hi & 0xff00) >> 8;
533                         break;
534                 }
535                 
536                 
537         }
538
539         dvma_unmap(sun3_dma_orig_addr);
540         sun3_dma_orig_addr = NULL;
541
542         dregs->dma_addr_hi = 0;
543         dregs->dma_addr_lo = 0;
544         dregs->dma_count_hi = 0;
545         dregs->dma_count_lo = 0;
546
547         dregs->fifo_count = 0;
548         dregs->fifo_count_hi = 0;
549
550         dregs->csr &= ~CSR_SEND;
551         
552 //      dregs->csr |= CSR_DMA_ENABLE;
553         
554 #if 0
555         /* reset fifo */
556         dregs->csr &= ~CSR_FIFO;
557         dregs->csr |= CSR_FIFO;
558 #endif  
559         sun3_dma_setup_done = NULL;
560
561         return ret;
562
563 }
564
565 #include "sun3_NCR5380.c"
566
567 static Scsi_Host_Template driver_template = {
568         .name                   = SUN3_SCSI_NAME,
569         .detect                 = sun3scsi_detect,
570         .release                = sun3scsi_release,
571         .info                   = sun3scsi_info,
572         .queuecommand           = sun3scsi_queue_command,
573         .eh_abort_handler       = sun3scsi_abort,
574         .eh_bus_reset_handler   = sun3scsi_bus_reset,
575         .can_queue              = CAN_QUEUE,
576         .this_id                = 7,
577         .sg_tablesize           = SG_TABLESIZE,
578         .cmd_per_lun            = CMD_PER_LUN,
579         .use_clustering         = DISABLE_CLUSTERING
580 };
581
582
583 #include "scsi_module.c"
584