git.oblomov.eu Git - linux-2.6/blob - drivers/video/pxafb.c

   1 /*
   2  *  linux/drivers/video/pxafb.c
   3  *
   4  *  Copyright (C) 1999 Eric A. Thomas.
   5  *  Copyright (C) 2004 Jean-Frederic Clere.
   6  *  Copyright (C) 2004 Ian Campbell.
   7  *  Copyright (C) 2004 Jeff Lackey.
   8  *   Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
   9  *  which in turn is
  10  *   Based on acornfb.c Copyright (C) Russell King.
  11  *
  12  * This file is subject to the terms and conditions of the GNU General Public
  13  * License.  See the file COPYING in the main directory of this archive for
  14  * more details.
  15  *
  16  *              Intel PXA250/210 LCD Controller Frame Buffer Driver
  17  *
  18  * Please direct your questions and comments on this driver to the following
  19  * email address:
  20  *
  21  *      linux-arm-kernel@lists.arm.linux.org.uk
  22  *
  23  */
  24
  25 #include <linux/module.h>
  26 #include <linux/moduleparam.h>
  27 #include <linux/kernel.h>
  28 #include <linux/sched.h>
  29 #include <linux/errno.h>
  30 #include <linux/string.h>
  31 #include <linux/interrupt.h>
  32 #include <linux/slab.h>
  33 #include <linux/fb.h>
  34 #include <linux/delay.h>
  35 #include <linux/init.h>
  36 #include <linux/ioport.h>
  37 #include <linux/cpufreq.h>
  38 #include <linux/platform_device.h>
  39 #include <linux/dma-mapping.h>
  40
  41 #include <asm/hardware.h>
  42 #include <asm/io.h>
  43 #include <asm/irq.h>
  44 #include <asm/uaccess.h>
  45 #include <asm/div64.h>
  46 #include <asm/arch/pxa-regs.h>
  47 #include <asm/arch/bitfield.h>
  48 #include <asm/arch/pxafb.h>
  49
  50 /*
  51  * Complain if VAR is out of range.
  52  */
  53 #define DEBUG_VAR 1
  54
  55 #include "pxafb.h"
  56
  57 /* Bits which should not be set in machine configuration structures */
  58 #define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
  59 #define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
  60
  61 static void (*pxafb_backlight_power)(int);
  62 static void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
  63
  64 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
  65 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
  66
  67 #ifdef CONFIG_FB_PXA_PARAMETERS
  68 #define PXAFB_OPTIONS_SIZE 256
  69 static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
  70 #endif
  71
  72 static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
  73 {
  74         unsigned long flags;
  75
  76         local_irq_save(flags);
  77         /*
  78          * We need to handle two requests being made at the same time.
  79          * There are two important cases:
  80          *  1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
  81          *     We must perform the unblanking, which will do our REENABLE for us.
  82          *  2. When we are blanking, but immediately unblank before we have
  83          *     blanked.  We do the "REENABLE" thing here as well, just to be sure.
  84          */
  85         if (fbi->task_state == C_ENABLE && state == C_REENABLE)
  86                 state = (u_int) -1;
  87         if (fbi->task_state == C_DISABLE && state == C_ENABLE)
  88                 state = C_REENABLE;
  89
  90         if (state != (u_int)-1) {
  91                 fbi->task_state = state;
  92                 schedule_work(&fbi->task);
  93         }
  94         local_irq_restore(flags);
  95 }
  96
  97 static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
  98 {
  99         chan &= 0xffff;
 100         chan >>= 16 - bf->length;
 101         return chan << bf->offset;
 102 }
 103
 104 static int
 105 pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
 106                        u_int trans, struct fb_info *info)
 107 {
 108         struct pxafb_info *fbi = (struct pxafb_info *)info;
 109         u_int val, ret = 1;
 110
 111         if (regno < fbi->palette_size) {
 112                 if (fbi->fb.var.grayscale) {
 113                         val = ((blue >> 8) & 0x00ff);
 114                 } else {
 115                         val  = ((red   >>  0) & 0xf800);
 116                         val |= ((green >>  5) & 0x07e0);
 117                         val |= ((blue  >> 11) & 0x001f);
 118                 }
 119                 fbi->palette_cpu[regno] = val;
 120                 ret = 0;
 121         }
 122         return ret;
 123 }
 124
 125 static int
 126 pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 127                    u_int trans, struct fb_info *info)
 128 {
 129         struct pxafb_info *fbi = (struct pxafb_info *)info;
 130         unsigned int val;
 131         int ret = 1;
 132
 133         /*
 134          * If inverse mode was selected, invert all the colours
 135          * rather than the register number.  The register number
 136          * is what you poke into the framebuffer to produce the
 137          * colour you requested.
 138          */
 139         if (fbi->cmap_inverse) {
 140                 red   = 0xffff - red;
 141                 green = 0xffff - green;
 142                 blue  = 0xffff - blue;
 143         }
 144
 145         /*
 146          * If greyscale is true, then we convert the RGB value
 147          * to greyscale no matter what visual we are using.
 148          */
 149         if (fbi->fb.var.grayscale)
 150                 red = green = blue = (19595 * red + 38470 * green +
 151                                         7471 * blue) >> 16;
 152
 153         switch (fbi->fb.fix.visual) {
 154         case FB_VISUAL_TRUECOLOR:
 155                 /*
 156                  * 16-bit True Colour.  We encode the RGB value
 157                  * according to the RGB bitfield information.
 158                  */
 159                 if (regno < 16) {
 160                         u32 *pal = fbi->fb.pseudo_palette;
 161
 162                         val  = chan_to_field(red, &fbi->fb.var.red);
 163                         val |= chan_to_field(green, &fbi->fb.var.green);
 164                         val |= chan_to_field(blue, &fbi->fb.var.blue);
 165
 166                         pal[regno] = val;
 167                         ret = 0;
 168                 }
 169                 break;
 170
 171         case FB_VISUAL_STATIC_PSEUDOCOLOR:
 172         case FB_VISUAL_PSEUDOCOLOR:
 173                 ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
 174                 break;
 175         }
 176
 177         return ret;
 178 }
 179
 180 /*
 181  *  pxafb_bpp_to_lccr3():
 182  *    Convert a bits per pixel value to the correct bit pattern for LCCR3
 183  */
 184 static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
 185 {
 186         int ret = 0;
 187         switch (var->bits_per_pixel) {
 188         case 1:  ret = LCCR3_1BPP; break;
 189         case 2:  ret = LCCR3_2BPP; break;
 190         case 4:  ret = LCCR3_4BPP; break;
 191         case 8:  ret = LCCR3_8BPP; break;
 192         case 16: ret = LCCR3_16BPP; break;
 193         }
 194         return ret;
 195 }
 196
 197 #ifdef CONFIG_CPU_FREQ
 198 /*
 199  *  pxafb_display_dma_period()
 200  *    Calculate the minimum period (in picoseconds) between two DMA
 201  *    requests for the LCD controller.  If we hit this, it means we're
 202  *    doing nothing but LCD DMA.
 203  */
 204 static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
 205 {
 206        /*
 207         * Period = pixclock * bits_per_byte * bytes_per_transfer
 208         *              / memory_bits_per_pixel;
 209         */
 210        return var->pixclock * 8 * 16 / var->bits_per_pixel;
 211 }
 212
 213 extern unsigned int get_clk_frequency_khz(int info);
 214 #endif
 215
 216 /*
 217  * Select the smallest mode that allows the desired resolution to be
 218  * displayed. If desired parameters can be rounded up.
 219  */
 220 static struct pxafb_mode_info *pxafb_getmode(struct pxafb_mach_info *mach, struct fb_var_screeninfo *var)
 221 {
 222         struct pxafb_mode_info *mode = NULL;
 223         struct pxafb_mode_info *modelist = mach->modes;
 224         unsigned int best_x = 0xffffffff, best_y = 0xffffffff;
 225         unsigned int i;
 226
 227         for (i = 0 ; i < mach->num_modes ; i++) {
 228                 if (modelist[i].xres >= var->xres && modelist[i].yres >= var->yres &&
 229                                 modelist[i].xres < best_x && modelist[i].yres < best_y &&
 230                                 modelist[i].bpp >= var->bits_per_pixel ) {
 231                         best_x = modelist[i].xres;
 232                         best_y = modelist[i].yres;
 233                         mode = &modelist[i];
 234                 }
 235         }
 236
 237         return mode;
 238 }
 239
 240 static void pxafb_setmode(struct fb_var_screeninfo *var, struct pxafb_mode_info *mode)
 241 {
 242         var->xres               = mode->xres;
 243         var->yres               = mode->yres;
 244         var->bits_per_pixel     = mode->bpp;
 245         var->pixclock           = mode->pixclock;
 246         var->hsync_len          = mode->hsync_len;
 247         var->left_margin        = mode->left_margin;
 248         var->right_margin       = mode->right_margin;
 249         var->vsync_len          = mode->vsync_len;
 250         var->upper_margin       = mode->upper_margin;
 251         var->lower_margin       = mode->lower_margin;
 252         var->sync               = mode->sync;
 253         var->grayscale          = mode->cmap_greyscale;
 254         var->xres_virtual       = var->xres;
 255         var->yres_virtual       = var->yres;
 256 }
 257
 258 /*
 259  *  pxafb_check_var():
 260  *    Get the video params out of 'var'. If a value doesn't fit, round it up,
 261  *    if it's too big, return -EINVAL.
 262  *
 263  *    Round up in the following order: bits_per_pixel, xres,
 264  *    yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
 265  *    bitfields, horizontal timing, vertical timing.
 266  */
 267 static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
 268 {
 269         struct pxafb_info *fbi = (struct pxafb_info *)info;
 270         struct pxafb_mach_info *inf = fbi->dev->platform_data;
 271
 272         if (var->xres < MIN_XRES)
 273                 var->xres = MIN_XRES;
 274         if (var->yres < MIN_YRES)
 275                 var->yres = MIN_YRES;
 276
 277         if (inf->fixed_modes) {
 278                 struct pxafb_mode_info *mode;
 279
 280                 mode = pxafb_getmode(inf, var);
 281                 if (!mode)
 282                         return -EINVAL;
 283                 pxafb_setmode(var, mode);
 284         } else {
 285                 if (var->xres > inf->modes->xres)
 286                         return -EINVAL;
 287                 if (var->yres > inf->modes->yres)
 288                         return -EINVAL;
 289                 if (var->bits_per_pixel > inf->modes->bpp)
 290                         return -EINVAL;
 291         }
 292
 293         var->xres_virtual =
 294                 max(var->xres_virtual, var->xres);
 295         var->yres_virtual =
 296                 max(var->yres_virtual, var->yres);
 297
 298         /*
 299          * Setup the RGB parameters for this display.
 300          *
 301          * The pixel packing format is described on page 7-11 of the
 302          * PXA2XX Developer's Manual.
 303          */
 304         if (var->bits_per_pixel == 16) {
 305                 var->red.offset   = 11; var->red.length   = 5;
 306                 var->green.offset = 5;  var->green.length = 6;
 307                 var->blue.offset  = 0;  var->blue.length  = 5;
 308                 var->transp.offset = var->transp.length = 0;
 309         } else {
 310                 var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
 311                 var->red.length   = 8;
 312                 var->green.length = 8;
 313                 var->blue.length  = 8;
 314                 var->transp.length = 0;
 315         }
 316
 317 #ifdef CONFIG_CPU_FREQ
 318         pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n",
 319                  pxafb_display_dma_period(var),
 320                  get_clk_frequency_khz(0));
 321 #endif
 322
 323         return 0;
 324 }
 325
 326 static inline void pxafb_set_truecolor(u_int is_true_color)
 327 {
 328         pr_debug("pxafb: true_color = %d\n", is_true_color);
 329         // do your machine-specific setup if needed
 330 }
 331
 332 /*
 333  * pxafb_set_par():
 334  *      Set the user defined part of the display for the specified console
 335  */
 336 static int pxafb_set_par(struct fb_info *info)
 337 {
 338         struct pxafb_info *fbi = (struct pxafb_info *)info;
 339         struct fb_var_screeninfo *var = &info->var;
 340         unsigned long palette_mem_size;
 341
 342         pr_debug("pxafb: set_par\n");
 343
 344         if (var->bits_per_pixel == 16)
 345                 fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
 346         else if (!fbi->cmap_static)
 347                 fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
 348         else {
 349                 /*
 350                  * Some people have weird ideas about wanting static
 351                  * pseudocolor maps.  I suspect their user space
 352                  * applications are broken.
 353                  */
 354                 fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
 355         }
 356
 357         fbi->fb.fix.line_length = var->xres_virtual *
 358                                   var->bits_per_pixel / 8;
 359         if (var->bits_per_pixel == 16)
 360                 fbi->palette_size = 0;
 361         else
 362                 fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
 363
 364         palette_mem_size = fbi->palette_size * sizeof(u16);
 365
 366         pr_debug("pxafb: palette_mem_size = 0x%08lx\n", palette_mem_size);
 367
 368         fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
 369         fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
 370
 371         /*
 372          * Set (any) board control register to handle new color depth
 373          */
 374         pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
 375
 376         if (fbi->fb.var.bits_per_pixel == 16)
 377                 fb_dealloc_cmap(&fbi->fb.cmap);
 378         else
 379                 fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
 380
 381         pxafb_activate_var(var, fbi);
 382
 383         return 0;
 384 }
 385
 386 /*
 387  * Formal definition of the VESA spec:
 388  *  On
 389  *      This refers to the state of the display when it is in full operation
 390  *  Stand-By
 391  *      This defines an optional operating state of minimal power reduction with
 392  *      the shortest recovery time
 393  *  Suspend
 394  *      This refers to a level of power management in which substantial power
 395  *      reduction is achieved by the display.  The display can have a longer
 396  *      recovery time from this state than from the Stand-by state
 397  *  Off
 398  *      This indicates that the display is consuming the lowest level of power
 399  *      and is non-operational. Recovery from this state may optionally require
 400  *      the user to manually power on the monitor
 401  *
 402  *  Now, the fbdev driver adds an additional state, (blank), where they
 403  *  turn off the video (maybe by colormap tricks), but don't mess with the
 404  *  video itself: think of it semantically between on and Stand-By.
 405  *
 406  *  So here's what we should do in our fbdev blank routine:
 407  *
 408  *      VESA_NO_BLANKING (mode 0)       Video on,  front/back light on
 409  *      VESA_VSYNC_SUSPEND (mode 1)     Video on,  front/back light off
 410  *      VESA_HSYNC_SUSPEND (mode 2)     Video on,  front/back light off
 411  *      VESA_POWERDOWN (mode 3)         Video off, front/back light off
 412  *
 413  *  This will match the matrox implementation.
 414  */
 415
 416 /*
 417  * pxafb_blank():
 418  *      Blank the display by setting all palette values to zero.  Note, the
 419  *      16 bpp mode does not really use the palette, so this will not
 420  *      blank the display in all modes.
 421  */
 422 static int pxafb_blank(int blank, struct fb_info *info)
 423 {
 424         struct pxafb_info *fbi = (struct pxafb_info *)info;
 425         int i;
 426
 427         pr_debug("pxafb: blank=%d\n", blank);
 428
 429         switch (blank) {
 430         case FB_BLANK_POWERDOWN:
 431         case FB_BLANK_VSYNC_SUSPEND:
 432         case FB_BLANK_HSYNC_SUSPEND:
 433         case FB_BLANK_NORMAL:
 434                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
 435                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 436                         for (i = 0; i < fbi->palette_size; i++)
 437                                 pxafb_setpalettereg(i, 0, 0, 0, 0, info);
 438
 439                 pxafb_schedule_work(fbi, C_DISABLE);
 440                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
 441                 break;
 442
 443         case FB_BLANK_UNBLANK:
 444                 //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
 445                 if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
 446                     fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
 447                         fb_set_cmap(&fbi->fb.cmap, info);
 448                 pxafb_schedule_work(fbi, C_ENABLE);
 449         }
 450         return 0;
 451 }
 452
 453 static int pxafb_mmap(struct fb_info *info,
 454                       struct vm_area_struct *vma)
 455 {
 456         struct pxafb_info *fbi = (struct pxafb_info *)info;
 457         unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
 458
 459         if (off < info->fix.smem_len) {
 460                 vma->vm_pgoff += 1;
 461                 return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
 462                                              fbi->map_dma, fbi->map_size);
 463         }
 464         return -EINVAL;
 465 }
 466
 467 static struct fb_ops pxafb_ops = {
 468         .owner          = THIS_MODULE,
 469         .fb_check_var   = pxafb_check_var,
 470         .fb_set_par     = pxafb_set_par,
 471         .fb_setcolreg   = pxafb_setcolreg,
 472         .fb_fillrect    = cfb_fillrect,
 473         .fb_copyarea    = cfb_copyarea,
 474         .fb_imageblit   = cfb_imageblit,
 475         .fb_blank       = pxafb_blank,
 476         .fb_mmap        = pxafb_mmap,
 477 };
 478
 479 /*
 480  * Calculate the PCD value from the clock rate (in picoseconds).
 481  * We take account of the PPCR clock setting.
 482  * From PXA Developer's Manual:
 483  *
 484  *   PixelClock =      LCLK
 485  *                -------------
 486  *                2 ( PCD + 1 )
 487  *
 488  *   PCD =      LCLK
 489  *         ------------- - 1
 490  *         2(PixelClock)
 491  *
 492  * Where:
 493  *   LCLK = LCD/Memory Clock
 494  *   PCD = LCCR3[7:0]
 495  *
 496  * PixelClock here is in Hz while the pixclock argument given is the
 497  * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
 498  *
 499  * The function get_lclk_frequency_10khz returns LCLK in units of
 500  * 10khz. Calling the result of this function lclk gives us the
 501  * following
 502  *
 503  *    PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
 504  *          -------------------------------------- - 1
 505  *                          2
 506  *
 507  * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
 508  */
 509 static inline unsigned int get_pcd(unsigned int pixclock)
 510 {
 511         unsigned long long pcd;
 512
 513         /* FIXME: Need to take into account Double Pixel Clock mode
 514          * (DPC) bit? or perhaps set it based on the various clock
 515          * speeds */
 516
 517         pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
 518         do_div(pcd, 100000000 * 2);
 519         /* no need for this, since we should subtract 1 anyway. they cancel */
 520         /* pcd += 1; */ /* make up for integer math truncations */
 521         return (unsigned int)pcd;
 522 }
 523
 524 /*
 525  * Some touchscreens need hsync information from the video driver to
 526  * function correctly. We export it here.
 527  */
 528 static inline void set_hsync_time(struct pxafb_info *fbi, unsigned int pcd)
 529 {
 530         unsigned long long htime;
 531
 532         if ((pcd == 0) || (fbi->fb.var.hsync_len == 0)) {
 533                 fbi->hsync_time=0;
 534                 return;
 535         }
 536
 537         htime = (unsigned long long)get_lcdclk_frequency_10khz() * 10000;
 538         do_div(htime, pcd * fbi->fb.var.hsync_len);
 539         fbi->hsync_time = htime;
 540 }
 541
 542 unsigned long pxafb_get_hsync_time(struct device *dev)
 543 {
 544         struct pxafb_info *fbi = dev_get_drvdata(dev);
 545
 546         /* If display is blanked/suspended, hsync isn't active */
 547         if (!fbi || (fbi->state != C_ENABLE))
 548                 return 0;
 549
 550         return fbi->hsync_time;
 551 }
 552 EXPORT_SYMBOL(pxafb_get_hsync_time);
 553
 554 /*
 555  * pxafb_activate_var():
 556  *      Configures LCD Controller based on entries in var parameter.  Settings are
 557  *      only written to the controller if changes were made.
 558  */
 559 static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi)
 560 {
 561         struct pxafb_lcd_reg new_regs;
 562         u_long flags;
 563         u_int lines_per_panel, pcd = get_pcd(var->pixclock);
 564
 565         pr_debug("pxafb: Configuring PXA LCD\n");
 566
 567         pr_debug("var: xres=%d hslen=%d lm=%d rm=%d\n",
 568                  var->xres, var->hsync_len,
 569                  var->left_margin, var->right_margin);
 570         pr_debug("var: yres=%d vslen=%d um=%d bm=%d\n",
 571                  var->yres, var->vsync_len,
 572                  var->upper_margin, var->lower_margin);
 573         pr_debug("var: pixclock=%d pcd=%d\n", var->pixclock, pcd);
 574
 575 #if DEBUG_VAR
 576         if (var->xres < 16        || var->xres > 1024)
 577                 printk(KERN_ERR "%s: invalid xres %d\n",
 578                         fbi->fb.fix.id, var->xres);
 579         switch(var->bits_per_pixel) {
 580         case 1:
 581         case 2:
 582         case 4:
 583         case 8:
 584         case 16:
 585                 break;
 586         default:
 587                 printk(KERN_ERR "%s: invalid bit depth %d\n",
 588                        fbi->fb.fix.id, var->bits_per_pixel);
 589                 break;
 590         }
 591         if (var->hsync_len < 1    || var->hsync_len > 64)
 592                 printk(KERN_ERR "%s: invalid hsync_len %d\n",
 593                         fbi->fb.fix.id, var->hsync_len);
 594         if (var->left_margin < 1  || var->left_margin > 255)
 595                 printk(KERN_ERR "%s: invalid left_margin %d\n",
 596                         fbi->fb.fix.id, var->left_margin);
 597         if (var->right_margin < 1 || var->right_margin > 255)
 598                 printk(KERN_ERR "%s: invalid right_margin %d\n",
 599                         fbi->fb.fix.id, var->right_margin);
 600         if (var->yres < 1         || var->yres > 1024)
 601                 printk(KERN_ERR "%s: invalid yres %d\n",
 602                         fbi->fb.fix.id, var->yres);
 603         if (var->vsync_len < 1    || var->vsync_len > 64)
 604                 printk(KERN_ERR "%s: invalid vsync_len %d\n",
 605                         fbi->fb.fix.id, var->vsync_len);
 606         if (var->upper_margin < 0 || var->upper_margin > 255)
 607                 printk(KERN_ERR "%s: invalid upper_margin %d\n",
 608                         fbi->fb.fix.id, var->upper_margin);
 609         if (var->lower_margin < 0 || var->lower_margin > 255)
 610                 printk(KERN_ERR "%s: invalid lower_margin %d\n",
 611                         fbi->fb.fix.id, var->lower_margin);
 612 #endif
 613
 614         new_regs.lccr0 = fbi->lccr0 |
 615                 (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
 616                  LCCR0_QDM | LCCR0_BM  | LCCR0_OUM);
 617
 618         new_regs.lccr1 =
 619                 LCCR1_DisWdth(var->xres) +
 620                 LCCR1_HorSnchWdth(var->hsync_len) +
 621                 LCCR1_BegLnDel(var->left_margin) +
 622                 LCCR1_EndLnDel(var->right_margin);
 623
 624         /*
 625          * If we have a dual scan LCD, we need to halve
 626          * the YRES parameter.
 627          */
 628         lines_per_panel = var->yres;
 629         if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
 630                 lines_per_panel /= 2;
 631
 632         new_regs.lccr2 =
 633                 LCCR2_DisHght(lines_per_panel) +
 634                 LCCR2_VrtSnchWdth(var->vsync_len) +
 635                 LCCR2_BegFrmDel(var->upper_margin) +
 636                 LCCR2_EndFrmDel(var->lower_margin);
 637
 638         new_regs.lccr3 = fbi->lccr3 |
 639                 pxafb_bpp_to_lccr3(var) |
 640                 (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
 641                 (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
 642
 643         if (pcd)
 644                 new_regs.lccr3 |= LCCR3_PixClkDiv(pcd);
 645
 646         pr_debug("nlccr0 = 0x%08x\n", new_regs.lccr0);
 647         pr_debug("nlccr1 = 0x%08x\n", new_regs.lccr1);
 648         pr_debug("nlccr2 = 0x%08x\n", new_regs.lccr2);
 649         pr_debug("nlccr3 = 0x%08x\n", new_regs.lccr3);
 650
 651         /* Update shadow copy atomically */
 652         local_irq_save(flags);
 653
 654         /* setup dma descriptors */
 655         fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16);
 656         fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16);
 657         fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16);
 658
 659         fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16;
 660         fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
 661         fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
 662
 663 #define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
 664
 665         /* populate descriptors */
 666         fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
 667         fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL;
 668         fbi->dmadesc_fblow_cpu->fidr  = 0;
 669         fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL;
 670
 671         fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */
 672
 673         fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
 674         fbi->dmadesc_fbhigh_cpu->fidr = 0;
 675         fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
 676
 677         fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
 678         fbi->dmadesc_palette_cpu->fidr  = 0;
 679         fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
 680
 681         if (var->bits_per_pixel == 16) {
 682                 /* palette shouldn't be loaded in true-color mode */
 683                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
 684                 fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
 685                 /* init it to something, even though we won't be using it */
 686                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma;
 687         } else {
 688                 fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
 689                 fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma;
 690                 fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */
 691         }
 692
 693 #if 0
 694         pr_debug("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu);
 695         pr_debug("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu);
 696         pr_debug("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu);
 697         pr_debug("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma);
 698         pr_debug("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma);
 699         pr_debug("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma);
 700
 701         pr_debug("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr);
 702         pr_debug("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr);
 703         pr_debug("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr);
 704
 705         pr_debug("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr);
 706         pr_debug("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr);
 707         pr_debug("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr);
 708
 709         pr_debug("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd);
 710         pr_debug("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd);
 711         pr_debug("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd);
 712 #endif
 713
 714         fbi->reg_lccr0 = new_regs.lccr0;
 715         fbi->reg_lccr1 = new_regs.lccr1;
 716         fbi->reg_lccr2 = new_regs.lccr2;
 717         fbi->reg_lccr3 = new_regs.lccr3;
 718         set_hsync_time(fbi, pcd);
 719         local_irq_restore(flags);
 720
 721         /*
 722          * Only update the registers if the controller is enabled
 723          * and something has changed.
 724          */
 725         if ((LCCR0  != fbi->reg_lccr0) || (LCCR1  != fbi->reg_lccr1) ||
 726             (LCCR2  != fbi->reg_lccr2) || (LCCR3  != fbi->reg_lccr3) ||
 727             (FDADR0 != fbi->fdadr0)    || (FDADR1 != fbi->fdadr1))
 728                 pxafb_schedule_work(fbi, C_REENABLE);
 729
 730         return 0;
 731 }
 732
 733 /*
 734  * NOTE!  The following functions are purely helpers for set_ctrlr_state.
 735  * Do not call them directly; set_ctrlr_state does the correct serialisation
 736  * to ensure that things happen in the right way 100% of time time.
 737  *      -- rmk
 738  */
 739 static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
 740 {
 741         pr_debug("pxafb: backlight o%s\n", on ? "n" : "ff");
 742
 743         if (pxafb_backlight_power)
 744                 pxafb_backlight_power(on);
 745 }
 746
 747 static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
 748 {
 749         pr_debug("pxafb: LCD power o%s\n", on ? "n" : "ff");
 750
 751         if (pxafb_lcd_power)
 752                 pxafb_lcd_power(on, &fbi->fb.var);
 753 }
 754
 755 static void pxafb_setup_gpio(struct pxafb_info *fbi)
 756 {
 757         int gpio, ldd_bits;
 758         unsigned int lccr0 = fbi->lccr0;
 759
 760         /*
 761          * setup is based on type of panel supported
 762         */
 763
 764         /* 4 bit interface */
 765         if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
 766             (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
 767             (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
 768                 ldd_bits = 4;
 769
 770         /* 8 bit interface */
 771         else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
 772                   ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
 773                  ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
 774                   (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
 775                 ldd_bits = 8;
 776
 777         /* 16 bit interface */
 778         else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
 779                  ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
 780                 ldd_bits = 16;
 781
 782         else {
 783                 printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
 784                 return;
 785         }
 786
 787         for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
 788                 pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
 789         pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
 790         pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
 791         pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
 792         pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
 793 }
 794
 795 static void pxafb_enable_controller(struct pxafb_info *fbi)
 796 {
 797         pr_debug("pxafb: Enabling LCD controller\n");
 798         pr_debug("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0);
 799         pr_debug("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1);
 800         pr_debug("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
 801         pr_debug("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
 802         pr_debug("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
 803         pr_debug("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
 804
 805         /* enable LCD controller clock */
 806         pxa_set_cken(CKEN16_LCD, 1);
 807
 808         /* Sequence from 11.7.10 */
 809         LCCR3 = fbi->reg_lccr3;
 810         LCCR2 = fbi->reg_lccr2;
 811         LCCR1 = fbi->reg_lccr1;
 812         LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
 813
 814         FDADR0 = fbi->fdadr0;
 815         FDADR1 = fbi->fdadr1;
 816         LCCR0 |= LCCR0_ENB;
 817
 818         pr_debug("FDADR0 0x%08x\n", (unsigned int) FDADR0);
 819         pr_debug("FDADR1 0x%08x\n", (unsigned int) FDADR1);
 820         pr_debug("LCCR0 0x%08x\n", (unsigned int) LCCR0);
 821         pr_debug("LCCR1 0x%08x\n", (unsigned int) LCCR1);
 822         pr_debug("LCCR2 0x%08x\n", (unsigned int) LCCR2);
 823         pr_debug("LCCR3 0x%08x\n", (unsigned int) LCCR3);
 824 }
 825
 826 static void pxafb_disable_controller(struct pxafb_info *fbi)
 827 {
 828         DECLARE_WAITQUEUE(wait, current);
 829
 830         pr_debug("pxafb: disabling LCD controller\n");
 831
 832         set_current_state(TASK_UNINTERRUPTIBLE);
 833         add_wait_queue(&fbi->ctrlr_wait, &wait);
 834
 835         LCSR = 0xffffffff;      /* Clear LCD Status Register */
 836         LCCR0 &= ~LCCR0_LDM;    /* Enable LCD Disable Done Interrupt */
 837         LCCR0 |= LCCR0_DIS;     /* Disable LCD Controller */
 838
 839         schedule_timeout(200 * HZ / 1000);
 840         remove_wait_queue(&fbi->ctrlr_wait, &wait);
 841
 842         /* disable LCD controller clock */
 843         pxa_set_cken(CKEN16_LCD, 0);
 844 }
 845
 846 /*
 847  *  pxafb_handle_irq: Handle 'LCD DONE' interrupts.
 848  */
 849 static irqreturn_t pxafb_handle_irq(int irq, void *dev_id)
 850 {
 851         struct pxafb_info *fbi = dev_id;
 852         unsigned int lcsr = LCSR;
 853
 854         if (lcsr & LCSR_LDD) {
 855                 LCCR0 |= LCCR0_LDM;
 856                 wake_up(&fbi->ctrlr_wait);
 857         }
 858
 859         LCSR = lcsr;
 860         return IRQ_HANDLED;
 861 }
 862
 863 /*
 864  * This function must be called from task context only, since it will
 865  * sleep when disabling the LCD controller, or if we get two contending
 866  * processes trying to alter state.
 867  */
 868 static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
 869 {
 870         u_int old_state;
 871
 872         down(&fbi->ctrlr_sem);
 873
 874         old_state = fbi->state;
 875
 876         /*
 877          * Hack around fbcon initialisation.
 878          */
 879         if (old_state == C_STARTUP && state == C_REENABLE)
 880                 state = C_ENABLE;
 881
 882         switch (state) {
 883         case C_DISABLE_CLKCHANGE:
 884                 /*
 885                  * Disable controller for clock change.  If the
 886                  * controller is already disabled, then do nothing.
 887                  */
 888                 if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
 889                         fbi->state = state;
 890                         //TODO __pxafb_lcd_power(fbi, 0);
 891                         pxafb_disable_controller(fbi);
 892                 }
 893                 break;
 894
 895         case C_DISABLE_PM:
 896         case C_DISABLE:
 897                 /*
 898                  * Disable controller
 899                  */
 900                 if (old_state != C_DISABLE) {
 901                         fbi->state = state;
 902                         __pxafb_backlight_power(fbi, 0);
 903                         __pxafb_lcd_power(fbi, 0);
 904                         if (old_state != C_DISABLE_CLKCHANGE)
 905                                 pxafb_disable_controller(fbi);
 906                 }
 907                 break;
 908
 909         case C_ENABLE_CLKCHANGE:
 910                 /*
 911                  * Enable the controller after clock change.  Only
 912                  * do this if we were disabled for the clock change.
 913                  */
 914                 if (old_state == C_DISABLE_CLKCHANGE) {
 915                         fbi->state = C_ENABLE;
 916                         pxafb_enable_controller(fbi);
 917                         //TODO __pxafb_lcd_power(fbi, 1);
 918                 }
 919                 break;
 920
 921         case C_REENABLE:
 922                 /*
 923                  * Re-enable the controller only if it was already
 924                  * enabled.  This is so we reprogram the control
 925                  * registers.
 926                  */
 927                 if (old_state == C_ENABLE) {
 928                         __pxafb_lcd_power(fbi, 0);
 929                         pxafb_disable_controller(fbi);
 930                         pxafb_setup_gpio(fbi);
 931                         pxafb_enable_controller(fbi);
 932                         __pxafb_lcd_power(fbi, 1);
 933                 }
 934                 break;
 935
 936         case C_ENABLE_PM:
 937                 /*
 938                  * Re-enable the controller after PM.  This is not
 939                  * perfect - think about the case where we were doing
 940                  * a clock change, and we suspended half-way through.
 941                  */
 942                 if (old_state != C_DISABLE_PM)
 943                         break;
 944                 /* fall through */
 945
 946         case C_ENABLE:
 947                 /*
 948                  * Power up the LCD screen, enable controller, and
 949                  * turn on the backlight.
 950                  */
 951                 if (old_state != C_ENABLE) {
 952                         fbi->state = C_ENABLE;
 953                         pxafb_setup_gpio(fbi);
 954                         pxafb_enable_controller(fbi);
 955                         __pxafb_lcd_power(fbi, 1);
 956                         __pxafb_backlight_power(fbi, 1);
 957                 }
 958                 break;
 959         }
 960         up(&fbi->ctrlr_sem);
 961 }
 962
 963 /*
 964  * Our LCD controller task (which is called when we blank or unblank)
 965  * via keventd.
 966  */
 967 static void pxafb_task(struct work_struct *work)
 968 {
 969         struct pxafb_info *fbi =
 970                 container_of(work, struct pxafb_info, task);
 971         u_int state = xchg(&fbi->task_state, -1);
 972
 973         set_ctrlr_state(fbi, state);
 974 }
 975
 976 #ifdef CONFIG_CPU_FREQ
 977 /*
 978  * CPU clock speed change handler.  We need to adjust the LCD timing
 979  * parameters when the CPU clock is adjusted by the power management
 980  * subsystem.
 981  *
 982  * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
 983  */
 984 static int
 985 pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
 986 {
 987         struct pxafb_info *fbi = TO_INF(nb, freq_transition);
 988         //TODO struct cpufreq_freqs *f = data;
 989         u_int pcd;
 990
 991         switch (val) {
 992         case CPUFREQ_PRECHANGE:
 993                 set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
 994                 break;
 995
 996         case CPUFREQ_POSTCHANGE:
 997                 pcd = get_pcd(fbi->fb.var.pixclock);
 998                 set_hsync_time(fbi, pcd);
 999                 fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
1000                 set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
1001                 break;
1002         }
1003         return 0;
1004 }
1005
1006 static int
1007 pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
1008 {
1009         struct pxafb_info *fbi = TO_INF(nb, freq_policy);
1010         struct fb_var_screeninfo *var = &fbi->fb.var;
1011         struct cpufreq_policy *policy = data;
1012
1013         switch (val) {
1014         case CPUFREQ_ADJUST:
1015         case CPUFREQ_INCOMPATIBLE:
1016                 printk(KERN_DEBUG "min dma period: %d ps, "
1017                         "new clock %d kHz\n", pxafb_display_dma_period(var),
1018                         policy->max);
1019                 // TODO: fill in min/max values
1020                 break;
1021 #if 0
1022         case CPUFREQ_NOTIFY:
1023                 printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__);
1024                 do {} while(0);
1025                 /* todo: panic if min/max values aren't fulfilled
1026                  * [can't really happen unless there's a bug in the
1027                  * CPU policy verification process *
1028                  */
1029                 break;
1030 #endif
1031         }
1032         return 0;
1033 }
1034 #endif
1035
1036 #ifdef CONFIG_PM
1037 /*
1038  * Power management hooks.  Note that we won't be called from IRQ context,
1039  * unlike the blank functions above, so we may sleep.
1040  */
1041 static int pxafb_suspend(struct platform_device *dev, pm_message_t state)
1042 {
1043         struct pxafb_info *fbi = platform_get_drvdata(dev);
1044
1045         set_ctrlr_state(fbi, C_DISABLE_PM);
1046         return 0;
1047 }
1048
1049 static int pxafb_resume(struct platform_device *dev)
1050 {
1051         struct pxafb_info *fbi = platform_get_drvdata(dev);
1052
1053         set_ctrlr_state(fbi, C_ENABLE_PM);
1054         return 0;
1055 }
1056 #else
1057 #define pxafb_suspend   NULL
1058 #define pxafb_resume    NULL
1059 #endif
1060
1061 /*
1062  * pxafb_map_video_memory():
1063  *      Allocates the DRAM memory for the frame buffer.  This buffer is
1064  *      remapped into a non-cached, non-buffered, memory region to
1065  *      allow palette and pixel writes to occur without flushing the
1066  *      cache.  Once this area is remapped, all virtual memory
1067  *      access to the video memory should occur at the new region.
1068  */
1069 static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
1070 {
1071         u_long palette_mem_size;
1072
1073         /*
1074          * We reserve one page for the palette, plus the size
1075          * of the framebuffer.
1076          */
1077         fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
1078         fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
1079                                               &fbi->map_dma, GFP_KERNEL);
1080
1081         if (fbi->map_cpu) {
1082                 /* prevent initial garbage on screen */
1083                 memset(fbi->map_cpu, 0, fbi->map_size);
1084                 fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
1085                 fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
1086                 /*
1087                  * FIXME: this is actually the wrong thing to place in
1088                  * smem_start.  But fbdev suffers from the problem that
1089                  * it needs an API which doesn't exist (in this case,
1090                  * dma_writecombine_mmap)
1091                  */
1092                 fbi->fb.fix.smem_start = fbi->screen_dma;
1093
1094                 fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
1095
1096                 palette_mem_size = fbi->palette_size * sizeof(u16);
1097                 pr_debug("pxafb: palette_mem_size = 0x%08lx\n", palette_mem_size);
1098
1099                 fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
1100                 fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
1101         }
1102
1103         return fbi->map_cpu ? 0 : -ENOMEM;
1104 }
1105
1106 static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
1107 {
1108         struct pxafb_info *fbi;
1109         void *addr;
1110         struct pxafb_mach_info *inf = dev->platform_data;
1111         struct pxafb_mode_info *mode = inf->modes;
1112         int i, smemlen;
1113
1114         /* Alloc the pxafb_info and pseudo_palette in one step */
1115         fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
1116         if (!fbi)
1117                 return NULL;
1118
1119         memset(fbi, 0, sizeof(struct pxafb_info));
1120         fbi->dev = dev;
1121
1122         strcpy(fbi->fb.fix.id, PXA_NAME);
1123
1124         fbi->fb.fix.type        = FB_TYPE_PACKED_PIXELS;
1125         fbi->fb.fix.type_aux    = 0;
1126         fbi->fb.fix.xpanstep    = 0;
1127         fbi->fb.fix.ypanstep    = 0;
1128         fbi->fb.fix.ywrapstep   = 0;
1129         fbi->fb.fix.accel       = FB_ACCEL_NONE;
1130
1131         fbi->fb.var.nonstd      = 0;
1132         fbi->fb.var.activate    = FB_ACTIVATE_NOW;
1133         fbi->fb.var.height      = -1;
1134         fbi->fb.var.width       = -1;
1135         fbi->fb.var.accel_flags = 0;
1136         fbi->fb.var.vmode       = FB_VMODE_NONINTERLACED;
1137
1138         fbi->fb.fbops           = &pxafb_ops;
1139         fbi->fb.flags           = FBINFO_DEFAULT;
1140         fbi->fb.node            = -1;
1141
1142         addr = fbi;
1143         addr = addr + sizeof(struct pxafb_info);
1144         fbi->fb.pseudo_palette  = addr;
1145
1146         pxafb_setmode(&fbi->fb.var, mode);
1147
1148         fbi->cmap_inverse               = inf->cmap_inverse;
1149         fbi->cmap_static                = inf->cmap_static;
1150
1151         fbi->lccr0                      = inf->lccr0;
1152         fbi->lccr3                      = inf->lccr3;
1153         fbi->state                      = C_STARTUP;
1154         fbi->task_state                 = (u_char)-1;
1155
1156         for (i = 0; i < inf->num_modes; i++) {
1157                 smemlen = mode[i].xres * mode[i].yres * mode[i].bpp / 8;
1158                 if (smemlen > fbi->fb.fix.smem_len)
1159                         fbi->fb.fix.smem_len = smemlen;
1160         }
1161
1162         init_waitqueue_head(&fbi->ctrlr_wait);
1163         INIT_WORK(&fbi->task, pxafb_task);
1164         init_MUTEX(&fbi->ctrlr_sem);
1165
1166         return fbi;
1167 }
1168
1169 #ifdef CONFIG_FB_PXA_PARAMETERS
1170 static int __init pxafb_parse_options(struct device *dev, char *options)
1171 {
1172         struct pxafb_mach_info *inf = dev->platform_data;
1173         char *this_opt;
1174
1175         if (!options || !*options)
1176                 return 0;
1177
1178         dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
1179
1180         /* could be made table driven or similar?... */
1181         while ((this_opt = strsep(&options, ",")) != NULL) {
1182                 if (!strncmp(this_opt, "mode:", 5)) {
1183                         const char *name = this_opt+5;
1184                         unsigned int namelen = strlen(name);
1185                         int res_specified = 0, bpp_specified = 0;
1186                         unsigned int xres = 0, yres = 0, bpp = 0;
1187                         int yres_specified = 0;
1188                         int i;
1189                         for (i = namelen-1; i >= 0; i--) {
1190                                 switch (name[i]) {
1191                                 case '-':
1192                                         namelen = i;
1193                                         if (!bpp_specified && !yres_specified) {
1194                                                 bpp = simple_strtoul(&name[i+1], NULL, 0);
1195                                                 bpp_specified = 1;
1196                                         } else
1197                                                 goto done;
1198                                         break;
1199                                 case 'x':
1200                                         if (!yres_specified) {
1201                                                 yres = simple_strtoul(&name[i+1], NULL, 0);
1202                                                 yres_specified = 1;
1203                                         } else
1204                                                 goto done;
1205                                         break;
1206                                 case '0'...'9':
1207                                         break;
1208                                 default:
1209                                         goto done;
1210                                 }
1211                         }
1212                         if (i < 0 && yres_specified) {
1213                                 xres = simple_strtoul(name, NULL, 0);
1214                                 res_specified = 1;
1215                         }
1216                 done:
1217                         if (res_specified) {
1218                                 dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
1219                                 inf->modes[0].xres = xres; inf->modes[0].yres = yres;
1220                         }
1221                         if (bpp_specified)
1222                                 switch (bpp) {
1223                                 case 1:
1224                                 case 2:
1225                                 case 4:
1226                                 case 8:
1227                                 case 16:
1228                                         inf->modes[0].bpp = bpp;
1229                                         dev_info(dev, "overriding bit depth: %d\n", bpp);
1230                                         break;
1231                                 default:
1232                                         dev_err(dev, "Depth %d is not valid\n", bpp);
1233                                 }
1234                 } else if (!strncmp(this_opt, "pixclock:", 9)) {
1235                         inf->modes[0].pixclock = simple_strtoul(this_opt+9, NULL, 0);
1236                         dev_info(dev, "override pixclock: %ld\n", inf->modes[0].pixclock);
1237                 } else if (!strncmp(this_opt, "left:", 5)) {
1238                         inf->modes[0].left_margin = simple_strtoul(this_opt+5, NULL, 0);
1239                         dev_info(dev, "override left: %u\n", inf->modes[0].left_margin);
1240                 } else if (!strncmp(this_opt, "right:", 6)) {
1241                         inf->modes[0].right_margin = simple_strtoul(this_opt+6, NULL, 0);
1242                         dev_info(dev, "override right: %u\n", inf->modes[0].right_margin);
1243                 } else if (!strncmp(this_opt, "upper:", 6)) {
1244                         inf->modes[0].upper_margin = simple_strtoul(this_opt+6, NULL, 0);
1245                         dev_info(dev, "override upper: %u\n", inf->modes[0].upper_margin);
1246                 } else if (!strncmp(this_opt, "lower:", 6)) {
1247                         inf->modes[0].lower_margin = simple_strtoul(this_opt+6, NULL, 0);
1248                         dev_info(dev, "override lower: %u\n", inf->modes[0].lower_margin);
1249                 } else if (!strncmp(this_opt, "hsynclen:", 9)) {
1250                         inf->modes[0].hsync_len = simple_strtoul(this_opt+9, NULL, 0);
1251                         dev_info(dev, "override hsynclen: %u\n", inf->modes[0].hsync_len);
1252                 } else if (!strncmp(this_opt, "vsynclen:", 9)) {
1253                         inf->modes[0].vsync_len = simple_strtoul(this_opt+9, NULL, 0);
1254                         dev_info(dev, "override vsynclen: %u\n", inf->modes[0].vsync_len);
1255                 } else if (!strncmp(this_opt, "hsync:", 6)) {
1256                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1257                                 dev_info(dev, "override hsync: Active Low\n");
1258                                 inf->modes[0].sync &= ~FB_SYNC_HOR_HIGH_ACT;
1259                         } else {
1260                                 dev_info(dev, "override hsync: Active High\n");
1261                                 inf->modes[0].sync |= FB_SYNC_HOR_HIGH_ACT;
1262                         }
1263                 } else if (!strncmp(this_opt, "vsync:", 6)) {
1264                         if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
1265                                 dev_info(dev, "override vsync: Active Low\n");
1266                                 inf->modes[0].sync &= ~FB_SYNC_VERT_HIGH_ACT;
1267                         } else {
1268                                 dev_info(dev, "override vsync: Active High\n");
1269                                 inf->modes[0].sync |= FB_SYNC_VERT_HIGH_ACT;
1270                         }
1271                 } else if (!strncmp(this_opt, "dpc:", 4)) {
1272                         if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
1273                                 dev_info(dev, "override double pixel clock: false\n");
1274                                 inf->lccr3 &= ~LCCR3_DPC;
1275                         } else {
1276                                 dev_info(dev, "override double pixel clock: true\n");
1277                                 inf->lccr3 |= LCCR3_DPC;
1278                         }
1279                 } else if (!strncmp(this_opt, "outputen:", 9)) {
1280                         if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
1281                                 dev_info(dev, "override output enable: active low\n");
1282                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
1283                         } else {
1284                                 dev_info(dev, "override output enable: active high\n");
1285                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
1286                         }
1287                 } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
1288                         if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
1289                                 dev_info(dev, "override pixel clock polarity: falling edge\n");
1290                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
1291                         } else {
1292                                 dev_info(dev, "override pixel clock polarity: rising edge\n");
1293                                 inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
1294                         }
1295                 } else if (!strncmp(this_opt, "color", 5)) {
1296                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
1297                 } else if (!strncmp(this_opt, "mono", 4)) {
1298                         inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
1299                 } else if (!strncmp(this_opt, "active", 6)) {
1300                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
1301                 } else if (!strncmp(this_opt, "passive", 7)) {
1302                         inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
1303                 } else if (!strncmp(this_opt, "single", 6)) {
1304                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
1305                 } else if (!strncmp(this_opt, "dual", 4)) {
1306                         inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
1307                 } else if (!strncmp(this_opt, "4pix", 4)) {
1308                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
1309                 } else if (!strncmp(this_opt, "8pix", 4)) {
1310                         inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
1311                 } else {
1312                         dev_err(dev, "unknown option: %s\n", this_opt);
1313                         return -EINVAL;
1314                 }
1315         }
1316         return 0;
1317
1318 }
1319 #endif
1320
1321 int __init pxafb_probe(struct platform_device *dev)
1322 {
1323         struct pxafb_info *fbi;
1324         struct pxafb_mach_info *inf;
1325         int ret;
1326
1327         dev_dbg(&dev->dev, "pxafb_probe\n");
1328
1329         inf = dev->dev.platform_data;
1330         ret = -ENOMEM;
1331         fbi = NULL;
1332         if (!inf)
1333                 goto failed;
1334
1335 #ifdef CONFIG_FB_PXA_PARAMETERS
1336         ret = pxafb_parse_options(&dev->dev, g_options);
1337         if (ret < 0)
1338                 goto failed;
1339 #endif
1340
1341 #ifdef DEBUG_VAR
1342         /* Check for various illegal bit-combinations. Currently only
1343          * a warning is given. */
1344
1345         if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
1346                 dev_warn(&dev->dev, "machine LCCR0 setting contains illegal bits: %08x\n",
1347                         inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
1348         if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
1349                 dev_warn(&dev->dev, "machine LCCR3 setting contains illegal bits: %08x\n",
1350                         inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
1351         if (inf->lccr0 & LCCR0_DPD &&
1352             ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
1353              (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
1354              (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
1355                 dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is only valid in passive mono"
1356                          " single panel mode\n");
1357         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
1358             (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
1359                 dev_warn(&dev->dev, "Dual panel only valid in passive mode\n");
1360         if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
1361              (inf->modes->upper_margin || inf->modes->lower_margin))
1362                 dev_warn(&dev->dev, "Upper and lower margins must be 0 in passive mode\n");
1363 #endif
1364
1365         dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n",inf->modes->xres, inf->modes->yres, inf->modes->bpp);
1366         if (inf->modes->xres == 0 || inf->modes->yres == 0 || inf->modes->bpp == 0) {
1367                 dev_err(&dev->dev, "Invalid resolution or bit depth\n");
1368                 ret = -EINVAL;
1369                 goto failed;
1370         }
1371         pxafb_backlight_power = inf->pxafb_backlight_power;
1372         pxafb_lcd_power = inf->pxafb_lcd_power;
1373         fbi = pxafb_init_fbinfo(&dev->dev);
1374         if (!fbi) {
1375                 dev_err(&dev->dev, "Failed to initialize framebuffer device\n");
1376                 ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
1377                 goto failed;
1378         }
1379
1380         /* Initialize video memory */
1381         ret = pxafb_map_video_memory(fbi);
1382         if (ret) {
1383                 dev_err(&dev->dev, "Failed to allocate video RAM: %d\n", ret);
1384                 ret = -ENOMEM;
1385                 goto failed;
1386         }
1387
1388         ret = request_irq(IRQ_LCD, pxafb_handle_irq, IRQF_DISABLED, "LCD", fbi);
1389         if (ret) {
1390                 dev_err(&dev->dev, "request_irq failed: %d\n", ret);
1391                 ret = -EBUSY;
1392                 goto failed;
1393         }
1394
1395         /*
1396          * This makes sure that our colour bitfield
1397          * descriptors are correctly initialised.
1398          */
1399         pxafb_check_var(&fbi->fb.var, &fbi->fb);
1400         pxafb_set_par(&fbi->fb);
1401
1402         platform_set_drvdata(dev, fbi);
1403
1404         ret = register_framebuffer(&fbi->fb);
1405         if (ret < 0) {
1406                 dev_err(&dev->dev, "Failed to register framebuffer device: %d\n", ret);
1407                 goto failed;
1408         }
1409
1410 #ifdef CONFIG_PM
1411         // TODO
1412 #endif
1413
1414 #ifdef CONFIG_CPU_FREQ
1415         fbi->freq_transition.notifier_call = pxafb_freq_transition;
1416         fbi->freq_policy.notifier_call = pxafb_freq_policy;
1417         cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
1418         cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
1419 #endif
1420
1421         /*
1422          * Ok, now enable the LCD controller
1423          */
1424         set_ctrlr_state(fbi, C_ENABLE);
1425
1426         return 0;
1427
1428 failed:
1429         platform_set_drvdata(dev, NULL);
1430         kfree(fbi);
1431         return ret;
1432 }
1433
1434 static struct platform_driver pxafb_driver = {
1435         .probe          = pxafb_probe,
1436 #ifdef CONFIG_PM
1437         .suspend        = pxafb_suspend,
1438         .resume         = pxafb_resume,
1439 #endif
1440         .driver         = {
1441                 .name   = "pxa2xx-fb",
1442         },
1443 };
1444
1445 #ifndef MODULE
1446 int __devinit pxafb_setup(char *options)
1447 {
1448 # ifdef CONFIG_FB_PXA_PARAMETERS
1449         if (options)
1450                 strlcpy(g_options, options, sizeof(g_options));
1451 # endif
1452         return 0;
1453 }
1454 #else
1455 # ifdef CONFIG_FB_PXA_PARAMETERS
1456 module_param_string(options, g_options, sizeof(g_options), 0);
1457 MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
1458 # endif
1459 #endif
1460
1461 int __devinit pxafb_init(void)
1462 {
1463 #ifndef MODULE
1464         char *option = NULL;
1465
1466         if (fb_get_options("pxafb", &option))
1467                 return -ENODEV;
1468         pxafb_setup(option);
1469 #endif
1470         return platform_driver_register(&pxafb_driver);
1471 }
1472
1473 module_init(pxafb_init);
1474
1475 MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
1476 MODULE_LICENSE("GPL");