2 Copyright (C) 2004 - 2009 rt2x00 SourceForge Project
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: Data structures and registers for the rt61pci module.
24 Supported chipsets: RT2561, RT2561s, RT2661.
40 * Defaul offset is required for RSSI <-> dBm conversion.
42 #define DEFAULT_RSSI_OFFSET 120
45 * Register layout information.
47 #define CSR_REG_BASE 0x3000
48 #define CSR_REG_SIZE 0x04b0
49 #define EEPROM_BASE 0x0000
50 #define EEPROM_SIZE 0x0100
51 #define BBP_BASE 0x0000
52 #define BBP_SIZE 0x0080
53 #define RF_BASE 0x0004
54 #define RF_SIZE 0x0010
57 * Number of TX queues.
59 #define NUM_TX_QUEUES 4
66 * HOST_CMD_CSR: For HOST to interrupt embedded processor
68 #define HOST_CMD_CSR 0x0008
69 #define HOST_CMD_CSR_HOST_COMMAND FIELD32(0x0000007f)
70 #define HOST_CMD_CSR_INTERRUPT_MCU FIELD32(0x00000080)
74 * SELECT_BANK: Select 8051 program bank.
75 * RESET: Enable 8051 reset state.
76 * READY: Ready state for 8051.
78 #define MCU_CNTL_CSR 0x000c
79 #define MCU_CNTL_CSR_SELECT_BANK FIELD32(0x00000001)
80 #define MCU_CNTL_CSR_RESET FIELD32(0x00000002)
81 #define MCU_CNTL_CSR_READY FIELD32(0x00000004)
85 * FORCE_CLOCK_ON: Host force MAC clock ON
87 #define SOFT_RESET_CSR 0x0010
88 #define SOFT_RESET_CSR_FORCE_CLOCK_ON FIELD32(0x00000002)
91 * MCU_INT_SOURCE_CSR: MCU interrupt source/mask register.
93 #define MCU_INT_SOURCE_CSR 0x0014
94 #define MCU_INT_SOURCE_CSR_0 FIELD32(0x00000001)
95 #define MCU_INT_SOURCE_CSR_1 FIELD32(0x00000002)
96 #define MCU_INT_SOURCE_CSR_2 FIELD32(0x00000004)
97 #define MCU_INT_SOURCE_CSR_3 FIELD32(0x00000008)
98 #define MCU_INT_SOURCE_CSR_4 FIELD32(0x00000010)
99 #define MCU_INT_SOURCE_CSR_5 FIELD32(0x00000020)
100 #define MCU_INT_SOURCE_CSR_6 FIELD32(0x00000040)
101 #define MCU_INT_SOURCE_CSR_7 FIELD32(0x00000080)
102 #define MCU_INT_SOURCE_CSR_TWAKEUP FIELD32(0x00000100)
103 #define MCU_INT_SOURCE_CSR_TBTT_EXPIRE FIELD32(0x00000200)
106 * MCU_INT_MASK_CSR: MCU interrupt source/mask register.
108 #define MCU_INT_MASK_CSR 0x0018
109 #define MCU_INT_MASK_CSR_0 FIELD32(0x00000001)
110 #define MCU_INT_MASK_CSR_1 FIELD32(0x00000002)
111 #define MCU_INT_MASK_CSR_2 FIELD32(0x00000004)
112 #define MCU_INT_MASK_CSR_3 FIELD32(0x00000008)
113 #define MCU_INT_MASK_CSR_4 FIELD32(0x00000010)
114 #define MCU_INT_MASK_CSR_5 FIELD32(0x00000020)
115 #define MCU_INT_MASK_CSR_6 FIELD32(0x00000040)
116 #define MCU_INT_MASK_CSR_7 FIELD32(0x00000080)
117 #define MCU_INT_MASK_CSR_TWAKEUP FIELD32(0x00000100)
118 #define MCU_INT_MASK_CSR_TBTT_EXPIRE FIELD32(0x00000200)
123 #define PCI_USEC_CSR 0x001c
126 * Security key table memory.
127 * 16 entries 32-byte for shared key table
128 * 64 entries 32-byte for pairwise key table
129 * 64 entries 8-byte for pairwise ta key table
131 #define SHARED_KEY_TABLE_BASE 0x1000
132 #define PAIRWISE_KEY_TABLE_BASE 0x1200
133 #define PAIRWISE_TA_TABLE_BASE 0x1a00
135 #define SHARED_KEY_ENTRY(__idx) \
136 ( SHARED_KEY_TABLE_BASE + \
137 ((__idx) * sizeof(struct hw_key_entry)) )
138 #define PAIRWISE_KEY_ENTRY(__idx) \
139 ( PAIRWISE_KEY_TABLE_BASE + \
140 ((__idx) * sizeof(struct hw_key_entry)) )
141 #define PAIRWISE_TA_ENTRY(__idx) \
142 ( PAIRWISE_TA_TABLE_BASE + \
143 ((__idx) * sizeof(struct hw_pairwise_ta_entry)) )
145 struct hw_key_entry {
149 } __attribute__ ((packed));
151 struct hw_pairwise_ta_entry {
155 } __attribute__ ((packed));
158 * Other on-chip shared memory space.
160 #define HW_CIS_BASE 0x2000
161 #define HW_NULL_BASE 0x2b00
164 * Since NULL frame won't be that long (256 byte),
165 * We steal 16 tail bytes to save debugging settings.
167 #define HW_DEBUG_SETTING_BASE 0x2bf0
170 * On-chip BEACON frame space.
172 #define HW_BEACON_BASE0 0x2c00
173 #define HW_BEACON_BASE1 0x2d00
174 #define HW_BEACON_BASE2 0x2e00
175 #define HW_BEACON_BASE3 0x2f00
177 #define HW_BEACON_OFFSET(__index) \
178 ( HW_BEACON_BASE0 + (__index * 0x0100) )
181 * HOST-MCU shared memory.
185 * H2M_MAILBOX_CSR: Host-to-MCU Mailbox.
187 #define H2M_MAILBOX_CSR 0x2100
188 #define H2M_MAILBOX_CSR_ARG0 FIELD32(0x000000ff)
189 #define H2M_MAILBOX_CSR_ARG1 FIELD32(0x0000ff00)
190 #define H2M_MAILBOX_CSR_CMD_TOKEN FIELD32(0x00ff0000)
191 #define H2M_MAILBOX_CSR_OWNER FIELD32(0xff000000)
194 * MCU_LEDCS: LED control for MCU Mailbox.
196 #define MCU_LEDCS_LED_MODE FIELD16(0x001f)
197 #define MCU_LEDCS_RADIO_STATUS FIELD16(0x0020)
198 #define MCU_LEDCS_LINK_BG_STATUS FIELD16(0x0040)
199 #define MCU_LEDCS_LINK_A_STATUS FIELD16(0x0080)
200 #define MCU_LEDCS_POLARITY_GPIO_0 FIELD16(0x0100)
201 #define MCU_LEDCS_POLARITY_GPIO_1 FIELD16(0x0200)
202 #define MCU_LEDCS_POLARITY_GPIO_2 FIELD16(0x0400)
203 #define MCU_LEDCS_POLARITY_GPIO_3 FIELD16(0x0800)
204 #define MCU_LEDCS_POLARITY_GPIO_4 FIELD16(0x1000)
205 #define MCU_LEDCS_POLARITY_ACT FIELD16(0x2000)
206 #define MCU_LEDCS_POLARITY_READY_BG FIELD16(0x4000)
207 #define MCU_LEDCS_POLARITY_READY_A FIELD16(0x8000)
212 #define M2H_CMD_DONE_CSR 0x2104
215 * MCU_TXOP_ARRAY_BASE.
217 #define MCU_TXOP_ARRAY_BASE 0x2110
220 * MAC Control/Status Registers(CSR).
221 * Some values are set in TU, whereas 1 TU == 1024 us.
225 * MAC_CSR0: ASIC revision number.
227 #define MAC_CSR0 0x3000
230 * MAC_CSR1: System control register.
231 * SOFT_RESET: Software reset bit, 1: reset, 0: normal.
232 * BBP_RESET: Hardware reset BBP.
233 * HOST_READY: Host is ready after initialization, 1: ready.
235 #define MAC_CSR1 0x3004
236 #define MAC_CSR1_SOFT_RESET FIELD32(0x00000001)
237 #define MAC_CSR1_BBP_RESET FIELD32(0x00000002)
238 #define MAC_CSR1_HOST_READY FIELD32(0x00000004)
241 * MAC_CSR2: STA MAC register 0.
243 #define MAC_CSR2 0x3008
244 #define MAC_CSR2_BYTE0 FIELD32(0x000000ff)
245 #define MAC_CSR2_BYTE1 FIELD32(0x0000ff00)
246 #define MAC_CSR2_BYTE2 FIELD32(0x00ff0000)
247 #define MAC_CSR2_BYTE3 FIELD32(0xff000000)
250 * MAC_CSR3: STA MAC register 1.
251 * UNICAST_TO_ME_MASK:
252 * Used to mask off bits from byte 5 of the MAC address
253 * to determine the UNICAST_TO_ME bit for RX frames.
254 * The full mask is complemented by BSS_ID_MASK:
255 * MASK = BSS_ID_MASK & UNICAST_TO_ME_MASK
257 #define MAC_CSR3 0x300c
258 #define MAC_CSR3_BYTE4 FIELD32(0x000000ff)
259 #define MAC_CSR3_BYTE5 FIELD32(0x0000ff00)
260 #define MAC_CSR3_UNICAST_TO_ME_MASK FIELD32(0x00ff0000)
263 * MAC_CSR4: BSSID register 0.
265 #define MAC_CSR4 0x3010
266 #define MAC_CSR4_BYTE0 FIELD32(0x000000ff)
267 #define MAC_CSR4_BYTE1 FIELD32(0x0000ff00)
268 #define MAC_CSR4_BYTE2 FIELD32(0x00ff0000)
269 #define MAC_CSR4_BYTE3 FIELD32(0xff000000)
272 * MAC_CSR5: BSSID register 1.
274 * This mask is used to mask off bits 0 and 1 of byte 5 of the
275 * BSSID. This will make sure that those bits will be ignored
276 * when determining the MY_BSS of RX frames.
277 * 0: 1-BSSID mode (BSS index = 0)
278 * 1: 2-BSSID mode (BSS index: Byte5, bit 0)
279 * 2: 2-BSSID mode (BSS index: byte5, bit 1)
280 * 3: 4-BSSID mode (BSS index: byte5, bit 0 - 1)
282 #define MAC_CSR5 0x3014
283 #define MAC_CSR5_BYTE4 FIELD32(0x000000ff)
284 #define MAC_CSR5_BYTE5 FIELD32(0x0000ff00)
285 #define MAC_CSR5_BSS_ID_MASK FIELD32(0x00ff0000)
288 * MAC_CSR6: Maximum frame length register.
290 #define MAC_CSR6 0x3018
291 #define MAC_CSR6_MAX_FRAME_UNIT FIELD32(0x00000fff)
296 #define MAC_CSR7 0x301c
299 * MAC_CSR8: SIFS/EIFS register.
300 * All units are in US.
302 #define MAC_CSR8 0x3020
303 #define MAC_CSR8_SIFS FIELD32(0x000000ff)
304 #define MAC_CSR8_SIFS_AFTER_RX_OFDM FIELD32(0x0000ff00)
305 #define MAC_CSR8_EIFS FIELD32(0xffff0000)
308 * MAC_CSR9: Back-Off control register.
309 * SLOT_TIME: Slot time, default is 20us for 802.11BG.
310 * CWMIN: Bit for Cwmin. default Cwmin is 31 (2^5 - 1).
311 * CWMAX: Bit for Cwmax, default Cwmax is 1023 (2^10 - 1).
312 * CW_SELECT: 1: CWmin/Cwmax select from register, 0:select from TxD.
314 #define MAC_CSR9 0x3024
315 #define MAC_CSR9_SLOT_TIME FIELD32(0x000000ff)
316 #define MAC_CSR9_CWMIN FIELD32(0x00000f00)
317 #define MAC_CSR9_CWMAX FIELD32(0x0000f000)
318 #define MAC_CSR9_CW_SELECT FIELD32(0x00010000)
321 * MAC_CSR10: Power state configuration.
323 #define MAC_CSR10 0x3028
326 * MAC_CSR11: Power saving transition time register.
327 * DELAY_AFTER_TBCN: Delay after Tbcn expired in units of TU.
328 * TBCN_BEFORE_WAKEUP: Number of beacon before wakeup.
329 * WAKEUP_LATENCY: In unit of TU.
331 #define MAC_CSR11 0x302c
332 #define MAC_CSR11_DELAY_AFTER_TBCN FIELD32(0x000000ff)
333 #define MAC_CSR11_TBCN_BEFORE_WAKEUP FIELD32(0x00007f00)
334 #define MAC_CSR11_AUTOWAKE FIELD32(0x00008000)
335 #define MAC_CSR11_WAKEUP_LATENCY FIELD32(0x000f0000)
338 * MAC_CSR12: Manual power control / status register (merge CSR20 & PWRCSR1).
339 * CURRENT_STATE: 0:sleep, 1:awake.
340 * FORCE_WAKEUP: This has higher priority than PUT_TO_SLEEP.
341 * BBP_CURRENT_STATE: 0: BBP sleep, 1: BBP awake.
343 #define MAC_CSR12 0x3030
344 #define MAC_CSR12_CURRENT_STATE FIELD32(0x00000001)
345 #define MAC_CSR12_PUT_TO_SLEEP FIELD32(0x00000002)
346 #define MAC_CSR12_FORCE_WAKEUP FIELD32(0x00000004)
347 #define MAC_CSR12_BBP_CURRENT_STATE FIELD32(0x00000008)
352 #define MAC_CSR13 0x3034
353 #define MAC_CSR13_BIT0 FIELD32(0x00000001)
354 #define MAC_CSR13_BIT1 FIELD32(0x00000002)
355 #define MAC_CSR13_BIT2 FIELD32(0x00000004)
356 #define MAC_CSR13_BIT3 FIELD32(0x00000008)
357 #define MAC_CSR13_BIT4 FIELD32(0x00000010)
358 #define MAC_CSR13_BIT5 FIELD32(0x00000020)
359 #define MAC_CSR13_BIT6 FIELD32(0x00000040)
360 #define MAC_CSR13_BIT7 FIELD32(0x00000080)
361 #define MAC_CSR13_BIT8 FIELD32(0x00000100)
362 #define MAC_CSR13_BIT9 FIELD32(0x00000200)
363 #define MAC_CSR13_BIT10 FIELD32(0x00000400)
364 #define MAC_CSR13_BIT11 FIELD32(0x00000800)
365 #define MAC_CSR13_BIT12 FIELD32(0x00001000)
368 * MAC_CSR14: LED control register.
369 * ON_PERIOD: On period, default 70ms.
370 * OFF_PERIOD: Off period, default 30ms.
371 * HW_LED: HW TX activity, 1: normal OFF, 0: normal ON.
372 * SW_LED: s/w LED, 1: ON, 0: OFF.
373 * HW_LED_POLARITY: 0: active low, 1: active high.
375 #define MAC_CSR14 0x3038
376 #define MAC_CSR14_ON_PERIOD FIELD32(0x000000ff)
377 #define MAC_CSR14_OFF_PERIOD FIELD32(0x0000ff00)
378 #define MAC_CSR14_HW_LED FIELD32(0x00010000)
379 #define MAC_CSR14_SW_LED FIELD32(0x00020000)
380 #define MAC_CSR14_HW_LED_POLARITY FIELD32(0x00040000)
381 #define MAC_CSR14_SW_LED2 FIELD32(0x00080000)
384 * MAC_CSR15: NAV control.
386 #define MAC_CSR15 0x303c
389 * TXRX control registers.
390 * Some values are set in TU, whereas 1 TU == 1024 us.
394 * TXRX_CSR0: TX/RX configuration register.
395 * TSF_OFFSET: Default is 24.
396 * AUTO_TX_SEQ: 1: ASIC auto replace sequence nr in outgoing frame.
397 * DISABLE_RX: Disable Rx engine.
398 * DROP_CRC: Drop CRC error.
399 * DROP_PHYSICAL: Drop physical error.
400 * DROP_CONTROL: Drop control frame.
401 * DROP_NOT_TO_ME: Drop not to me unicast frame.
402 * DROP_TO_DS: Drop fram ToDs bit is true.
403 * DROP_VERSION_ERROR: Drop version error frame.
404 * DROP_MULTICAST: Drop multicast frames.
405 * DROP_BORADCAST: Drop broadcast frames.
406 * ROP_ACK_CTS: Drop received ACK and CTS.
408 #define TXRX_CSR0 0x3040
409 #define TXRX_CSR0_RX_ACK_TIMEOUT FIELD32(0x000001ff)
410 #define TXRX_CSR0_TSF_OFFSET FIELD32(0x00007e00)
411 #define TXRX_CSR0_AUTO_TX_SEQ FIELD32(0x00008000)
412 #define TXRX_CSR0_DISABLE_RX FIELD32(0x00010000)
413 #define TXRX_CSR0_DROP_CRC FIELD32(0x00020000)
414 #define TXRX_CSR0_DROP_PHYSICAL FIELD32(0x00040000)
415 #define TXRX_CSR0_DROP_CONTROL FIELD32(0x00080000)
416 #define TXRX_CSR0_DROP_NOT_TO_ME FIELD32(0x00100000)
417 #define TXRX_CSR0_DROP_TO_DS FIELD32(0x00200000)
418 #define TXRX_CSR0_DROP_VERSION_ERROR FIELD32(0x00400000)
419 #define TXRX_CSR0_DROP_MULTICAST FIELD32(0x00800000)
420 #define TXRX_CSR0_DROP_BROADCAST FIELD32(0x01000000)
421 #define TXRX_CSR0_DROP_ACK_CTS FIELD32(0x02000000)
422 #define TXRX_CSR0_TX_WITHOUT_WAITING FIELD32(0x04000000)
427 #define TXRX_CSR1 0x3044
428 #define TXRX_CSR1_BBP_ID0 FIELD32(0x0000007f)
429 #define TXRX_CSR1_BBP_ID0_VALID FIELD32(0x00000080)
430 #define TXRX_CSR1_BBP_ID1 FIELD32(0x00007f00)
431 #define TXRX_CSR1_BBP_ID1_VALID FIELD32(0x00008000)
432 #define TXRX_CSR1_BBP_ID2 FIELD32(0x007f0000)
433 #define TXRX_CSR1_BBP_ID2_VALID FIELD32(0x00800000)
434 #define TXRX_CSR1_BBP_ID3 FIELD32(0x7f000000)
435 #define TXRX_CSR1_BBP_ID3_VALID FIELD32(0x80000000)
440 #define TXRX_CSR2 0x3048
441 #define TXRX_CSR2_BBP_ID0 FIELD32(0x0000007f)
442 #define TXRX_CSR2_BBP_ID0_VALID FIELD32(0x00000080)
443 #define TXRX_CSR2_BBP_ID1 FIELD32(0x00007f00)
444 #define TXRX_CSR2_BBP_ID1_VALID FIELD32(0x00008000)
445 #define TXRX_CSR2_BBP_ID2 FIELD32(0x007f0000)
446 #define TXRX_CSR2_BBP_ID2_VALID FIELD32(0x00800000)
447 #define TXRX_CSR2_BBP_ID3 FIELD32(0x7f000000)
448 #define TXRX_CSR2_BBP_ID3_VALID FIELD32(0x80000000)
453 #define TXRX_CSR3 0x304c
454 #define TXRX_CSR3_BBP_ID0 FIELD32(0x0000007f)
455 #define TXRX_CSR3_BBP_ID0_VALID FIELD32(0x00000080)
456 #define TXRX_CSR3_BBP_ID1 FIELD32(0x00007f00)
457 #define TXRX_CSR3_BBP_ID1_VALID FIELD32(0x00008000)
458 #define TXRX_CSR3_BBP_ID2 FIELD32(0x007f0000)
459 #define TXRX_CSR3_BBP_ID2_VALID FIELD32(0x00800000)
460 #define TXRX_CSR3_BBP_ID3 FIELD32(0x7f000000)
461 #define TXRX_CSR3_BBP_ID3_VALID FIELD32(0x80000000)
464 * TXRX_CSR4: Auto-Responder/Tx-retry register.
465 * AUTORESPOND_PREAMBLE: 0:long, 1:short preamble.
466 * OFDM_TX_RATE_DOWN: 1:enable.
467 * OFDM_TX_RATE_STEP: 0:1-step, 1: 2-step, 2:3-step, 3:4-step.
468 * OFDM_TX_FALLBACK_CCK: 0: Fallback to OFDM 6M only, 1: Fallback to CCK 1M,2M.
470 #define TXRX_CSR4 0x3050
471 #define TXRX_CSR4_TX_ACK_TIMEOUT FIELD32(0x000000ff)
472 #define TXRX_CSR4_CNTL_ACK_POLICY FIELD32(0x00000700)
473 #define TXRX_CSR4_ACK_CTS_PSM FIELD32(0x00010000)
474 #define TXRX_CSR4_AUTORESPOND_ENABLE FIELD32(0x00020000)
475 #define TXRX_CSR4_AUTORESPOND_PREAMBLE FIELD32(0x00040000)
476 #define TXRX_CSR4_OFDM_TX_RATE_DOWN FIELD32(0x00080000)
477 #define TXRX_CSR4_OFDM_TX_RATE_STEP FIELD32(0x00300000)
478 #define TXRX_CSR4_OFDM_TX_FALLBACK_CCK FIELD32(0x00400000)
479 #define TXRX_CSR4_LONG_RETRY_LIMIT FIELD32(0x0f000000)
480 #define TXRX_CSR4_SHORT_RETRY_LIMIT FIELD32(0xf0000000)
485 #define TXRX_CSR5 0x3054
488 * TXRX_CSR6: ACK/CTS payload consumed time
490 #define TXRX_CSR6 0x3058
493 * TXRX_CSR7: OFDM ACK/CTS payload consumed time for 6/9/12/18 mbps.
495 #define TXRX_CSR7 0x305c
496 #define TXRX_CSR7_ACK_CTS_6MBS FIELD32(0x000000ff)
497 #define TXRX_CSR7_ACK_CTS_9MBS FIELD32(0x0000ff00)
498 #define TXRX_CSR7_ACK_CTS_12MBS FIELD32(0x00ff0000)
499 #define TXRX_CSR7_ACK_CTS_18MBS FIELD32(0xff000000)
502 * TXRX_CSR8: OFDM ACK/CTS payload consumed time for 24/36/48/54 mbps.
504 #define TXRX_CSR8 0x3060
505 #define TXRX_CSR8_ACK_CTS_24MBS FIELD32(0x000000ff)
506 #define TXRX_CSR8_ACK_CTS_36MBS FIELD32(0x0000ff00)
507 #define TXRX_CSR8_ACK_CTS_48MBS FIELD32(0x00ff0000)
508 #define TXRX_CSR8_ACK_CTS_54MBS FIELD32(0xff000000)
511 * TXRX_CSR9: Synchronization control register.
512 * BEACON_INTERVAL: In unit of 1/16 TU.
513 * TSF_TICKING: Enable TSF auto counting.
514 * TSF_SYNC: Tsf sync, 0: disable, 1: infra, 2: ad-hoc/master mode.
515 * BEACON_GEN: Enable beacon generator.
517 #define TXRX_CSR9 0x3064
518 #define TXRX_CSR9_BEACON_INTERVAL FIELD32(0x0000ffff)
519 #define TXRX_CSR9_TSF_TICKING FIELD32(0x00010000)
520 #define TXRX_CSR9_TSF_SYNC FIELD32(0x00060000)
521 #define TXRX_CSR9_TBTT_ENABLE FIELD32(0x00080000)
522 #define TXRX_CSR9_BEACON_GEN FIELD32(0x00100000)
523 #define TXRX_CSR9_TIMESTAMP_COMPENSATE FIELD32(0xff000000)
526 * TXRX_CSR10: BEACON alignment.
528 #define TXRX_CSR10 0x3068
531 * TXRX_CSR11: AES mask.
533 #define TXRX_CSR11 0x306c
536 * TXRX_CSR12: TSF low 32.
538 #define TXRX_CSR12 0x3070
539 #define TXRX_CSR12_LOW_TSFTIMER FIELD32(0xffffffff)
542 * TXRX_CSR13: TSF high 32.
544 #define TXRX_CSR13 0x3074
545 #define TXRX_CSR13_HIGH_TSFTIMER FIELD32(0xffffffff)
548 * TXRX_CSR14: TBTT timer.
550 #define TXRX_CSR14 0x3078
553 * TXRX_CSR15: TKIP MIC priority byte "AND" mask.
555 #define TXRX_CSR15 0x307c
558 * PHY control registers.
559 * Some values are set in TU, whereas 1 TU == 1024 us.
563 * PHY_CSR0: RF/PS control.
565 #define PHY_CSR0 0x3080
566 #define PHY_CSR0_PA_PE_BG FIELD32(0x00010000)
567 #define PHY_CSR0_PA_PE_A FIELD32(0x00020000)
572 #define PHY_CSR1 0x3084
575 * PHY_CSR2: Pre-TX BBP control.
577 #define PHY_CSR2 0x3088
580 * PHY_CSR3: BBP serial control register.
581 * VALUE: Register value to program into BBP.
582 * REG_NUM: Selected BBP register.
583 * READ_CONTROL: 0: Write BBP, 1: Read BBP.
584 * BUSY: 1: ASIC is busy execute BBP programming.
586 #define PHY_CSR3 0x308c
587 #define PHY_CSR3_VALUE FIELD32(0x000000ff)
588 #define PHY_CSR3_REGNUM FIELD32(0x00007f00)
589 #define PHY_CSR3_READ_CONTROL FIELD32(0x00008000)
590 #define PHY_CSR3_BUSY FIELD32(0x00010000)
593 * PHY_CSR4: RF serial control register
594 * VALUE: Register value (include register id) serial out to RF/IF chip.
595 * NUMBER_OF_BITS: Number of bits used in RFRegValue (I:20, RFMD:22).
596 * IF_SELECT: 1: select IF to program, 0: select RF to program.
597 * PLL_LD: RF PLL_LD status.
598 * BUSY: 1: ASIC is busy execute RF programming.
600 #define PHY_CSR4 0x3090
601 #define PHY_CSR4_VALUE FIELD32(0x00ffffff)
602 #define PHY_CSR4_NUMBER_OF_BITS FIELD32(0x1f000000)
603 #define PHY_CSR4_IF_SELECT FIELD32(0x20000000)
604 #define PHY_CSR4_PLL_LD FIELD32(0x40000000)
605 #define PHY_CSR4_BUSY FIELD32(0x80000000)
608 * PHY_CSR5: RX to TX signal switch timing control.
610 #define PHY_CSR5 0x3094
611 #define PHY_CSR5_IQ_FLIP FIELD32(0x00000004)
614 * PHY_CSR6: TX to RX signal timing control.
616 #define PHY_CSR6 0x3098
617 #define PHY_CSR6_IQ_FLIP FIELD32(0x00000004)
620 * PHY_CSR7: TX DAC switching timing control.
622 #define PHY_CSR7 0x309c
625 * Security control register.
629 * SEC_CSR0: Shared key table control.
631 #define SEC_CSR0 0x30a0
632 #define SEC_CSR0_BSS0_KEY0_VALID FIELD32(0x00000001)
633 #define SEC_CSR0_BSS0_KEY1_VALID FIELD32(0x00000002)
634 #define SEC_CSR0_BSS0_KEY2_VALID FIELD32(0x00000004)
635 #define SEC_CSR0_BSS0_KEY3_VALID FIELD32(0x00000008)
636 #define SEC_CSR0_BSS1_KEY0_VALID FIELD32(0x00000010)
637 #define SEC_CSR0_BSS1_KEY1_VALID FIELD32(0x00000020)
638 #define SEC_CSR0_BSS1_KEY2_VALID FIELD32(0x00000040)
639 #define SEC_CSR0_BSS1_KEY3_VALID FIELD32(0x00000080)
640 #define SEC_CSR0_BSS2_KEY0_VALID FIELD32(0x00000100)
641 #define SEC_CSR0_BSS2_KEY1_VALID FIELD32(0x00000200)
642 #define SEC_CSR0_BSS2_KEY2_VALID FIELD32(0x00000400)
643 #define SEC_CSR0_BSS2_KEY3_VALID FIELD32(0x00000800)
644 #define SEC_CSR0_BSS3_KEY0_VALID FIELD32(0x00001000)
645 #define SEC_CSR0_BSS3_KEY1_VALID FIELD32(0x00002000)
646 #define SEC_CSR0_BSS3_KEY2_VALID FIELD32(0x00004000)
647 #define SEC_CSR0_BSS3_KEY3_VALID FIELD32(0x00008000)
650 * SEC_CSR1: Shared key table security mode register.
652 #define SEC_CSR1 0x30a4
653 #define SEC_CSR1_BSS0_KEY0_CIPHER_ALG FIELD32(0x00000007)
654 #define SEC_CSR1_BSS0_KEY1_CIPHER_ALG FIELD32(0x00000070)
655 #define SEC_CSR1_BSS0_KEY2_CIPHER_ALG FIELD32(0x00000700)
656 #define SEC_CSR1_BSS0_KEY3_CIPHER_ALG FIELD32(0x00007000)
657 #define SEC_CSR1_BSS1_KEY0_CIPHER_ALG FIELD32(0x00070000)
658 #define SEC_CSR1_BSS1_KEY1_CIPHER_ALG FIELD32(0x00700000)
659 #define SEC_CSR1_BSS1_KEY2_CIPHER_ALG FIELD32(0x07000000)
660 #define SEC_CSR1_BSS1_KEY3_CIPHER_ALG FIELD32(0x70000000)
663 * Pairwise key table valid bitmap registers.
664 * SEC_CSR2: pairwise key table valid bitmap 0.
665 * SEC_CSR3: pairwise key table valid bitmap 1.
667 #define SEC_CSR2 0x30a8
668 #define SEC_CSR3 0x30ac
671 * SEC_CSR4: Pairwise key table lookup control.
673 #define SEC_CSR4 0x30b0
674 #define SEC_CSR4_ENABLE_BSS0 FIELD32(0x00000001)
675 #define SEC_CSR4_ENABLE_BSS1 FIELD32(0x00000002)
676 #define SEC_CSR4_ENABLE_BSS2 FIELD32(0x00000004)
677 #define SEC_CSR4_ENABLE_BSS3 FIELD32(0x00000008)
680 * SEC_CSR5: shared key table security mode register.
682 #define SEC_CSR5 0x30b4
683 #define SEC_CSR5_BSS2_KEY0_CIPHER_ALG FIELD32(0x00000007)
684 #define SEC_CSR5_BSS2_KEY1_CIPHER_ALG FIELD32(0x00000070)
685 #define SEC_CSR5_BSS2_KEY2_CIPHER_ALG FIELD32(0x00000700)
686 #define SEC_CSR5_BSS2_KEY3_CIPHER_ALG FIELD32(0x00007000)
687 #define SEC_CSR5_BSS3_KEY0_CIPHER_ALG FIELD32(0x00070000)
688 #define SEC_CSR5_BSS3_KEY1_CIPHER_ALG FIELD32(0x00700000)
689 #define SEC_CSR5_BSS3_KEY2_CIPHER_ALG FIELD32(0x07000000)
690 #define SEC_CSR5_BSS3_KEY3_CIPHER_ALG FIELD32(0x70000000)
693 * STA control registers.
697 * STA_CSR0: RX PLCP error count & RX FCS error count.
699 #define STA_CSR0 0x30c0
700 #define STA_CSR0_FCS_ERROR FIELD32(0x0000ffff)
701 #define STA_CSR0_PLCP_ERROR FIELD32(0xffff0000)
704 * STA_CSR1: RX False CCA count & RX LONG frame count.
706 #define STA_CSR1 0x30c4
707 #define STA_CSR1_PHYSICAL_ERROR FIELD32(0x0000ffff)
708 #define STA_CSR1_FALSE_CCA_ERROR FIELD32(0xffff0000)
711 * STA_CSR2: TX Beacon count and RX FIFO overflow count.
713 #define STA_CSR2 0x30c8
714 #define STA_CSR2_RX_FIFO_OVERFLOW_COUNT FIELD32(0x0000ffff)
715 #define STA_CSR2_RX_OVERFLOW_COUNT FIELD32(0xffff0000)
718 * STA_CSR3: TX Beacon count.
720 #define STA_CSR3 0x30cc
721 #define STA_CSR3_TX_BEACON_COUNT FIELD32(0x0000ffff)
724 * STA_CSR4: TX Result status register.
725 * VALID: 1:This register contains a valid TX result.
727 #define STA_CSR4 0x30d0
728 #define STA_CSR4_VALID FIELD32(0x00000001)
729 #define STA_CSR4_TX_RESULT FIELD32(0x0000000e)
730 #define STA_CSR4_RETRY_COUNT FIELD32(0x000000f0)
731 #define STA_CSR4_PID_SUBTYPE FIELD32(0x00001f00)
732 #define STA_CSR4_PID_TYPE FIELD32(0x0000e000)
733 #define STA_CSR4_TXRATE FIELD32(0x000f0000)
736 * QOS control registers.
740 * QOS_CSR0: TXOP holder MAC address register.
742 #define QOS_CSR0 0x30e0
743 #define QOS_CSR0_BYTE0 FIELD32(0x000000ff)
744 #define QOS_CSR0_BYTE1 FIELD32(0x0000ff00)
745 #define QOS_CSR0_BYTE2 FIELD32(0x00ff0000)
746 #define QOS_CSR0_BYTE3 FIELD32(0xff000000)
749 * QOS_CSR1: TXOP holder MAC address register.
751 #define QOS_CSR1 0x30e4
752 #define QOS_CSR1_BYTE4 FIELD32(0x000000ff)
753 #define QOS_CSR1_BYTE5 FIELD32(0x0000ff00)
756 * QOS_CSR2: TXOP holder timeout register.
758 #define QOS_CSR2 0x30e8
761 * RX QOS-CFPOLL MAC address register.
762 * QOS_CSR3: RX QOS-CFPOLL MAC address 0.
763 * QOS_CSR4: RX QOS-CFPOLL MAC address 1.
765 #define QOS_CSR3 0x30ec
766 #define QOS_CSR4 0x30f0
769 * QOS_CSR5: "QosControl" field of the RX QOS-CFPOLL.
771 #define QOS_CSR5 0x30f4
774 * Host DMA registers.
778 * AC0_BASE_CSR: AC_BK base address.
780 #define AC0_BASE_CSR 0x3400
781 #define AC0_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
784 * AC1_BASE_CSR: AC_BE base address.
786 #define AC1_BASE_CSR 0x3404
787 #define AC1_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
790 * AC2_BASE_CSR: AC_VI base address.
792 #define AC2_BASE_CSR 0x3408
793 #define AC2_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
796 * AC3_BASE_CSR: AC_VO base address.
798 #define AC3_BASE_CSR 0x340c
799 #define AC3_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
802 * MGMT_BASE_CSR: MGMT ring base address.
804 #define MGMT_BASE_CSR 0x3410
805 #define MGMT_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
808 * TX_RING_CSR0: TX Ring size for AC_BK, AC_BE, AC_VI, AC_VO.
810 #define TX_RING_CSR0 0x3418
811 #define TX_RING_CSR0_AC0_RING_SIZE FIELD32(0x000000ff)
812 #define TX_RING_CSR0_AC1_RING_SIZE FIELD32(0x0000ff00)
813 #define TX_RING_CSR0_AC2_RING_SIZE FIELD32(0x00ff0000)
814 #define TX_RING_CSR0_AC3_RING_SIZE FIELD32(0xff000000)
817 * TX_RING_CSR1: TX Ring size for MGMT Ring, HCCA Ring
818 * TXD_SIZE: In unit of 32-bit.
820 #define TX_RING_CSR1 0x341c
821 #define TX_RING_CSR1_MGMT_RING_SIZE FIELD32(0x000000ff)
822 #define TX_RING_CSR1_HCCA_RING_SIZE FIELD32(0x0000ff00)
823 #define TX_RING_CSR1_TXD_SIZE FIELD32(0x003f0000)
826 * AIFSN_CSR: AIFSN for each EDCA AC.
832 #define AIFSN_CSR 0x3420
833 #define AIFSN_CSR_AIFSN0 FIELD32(0x0000000f)
834 #define AIFSN_CSR_AIFSN1 FIELD32(0x000000f0)
835 #define AIFSN_CSR_AIFSN2 FIELD32(0x00000f00)
836 #define AIFSN_CSR_AIFSN3 FIELD32(0x0000f000)
839 * CWMIN_CSR: CWmin for each EDCA AC.
845 #define CWMIN_CSR 0x3424
846 #define CWMIN_CSR_CWMIN0 FIELD32(0x0000000f)
847 #define CWMIN_CSR_CWMIN1 FIELD32(0x000000f0)
848 #define CWMIN_CSR_CWMIN2 FIELD32(0x00000f00)
849 #define CWMIN_CSR_CWMIN3 FIELD32(0x0000f000)
852 * CWMAX_CSR: CWmax for each EDCA AC.
858 #define CWMAX_CSR 0x3428
859 #define CWMAX_CSR_CWMAX0 FIELD32(0x0000000f)
860 #define CWMAX_CSR_CWMAX1 FIELD32(0x000000f0)
861 #define CWMAX_CSR_CWMAX2 FIELD32(0x00000f00)
862 #define CWMAX_CSR_CWMAX3 FIELD32(0x0000f000)
865 * TX_DMA_DST_CSR: TX DMA destination
866 * 0: TX ring0, 1: TX ring1, 2: TX ring2 3: invalid
868 #define TX_DMA_DST_CSR 0x342c
869 #define TX_DMA_DST_CSR_DEST_AC0 FIELD32(0x00000003)
870 #define TX_DMA_DST_CSR_DEST_AC1 FIELD32(0x0000000c)
871 #define TX_DMA_DST_CSR_DEST_AC2 FIELD32(0x00000030)
872 #define TX_DMA_DST_CSR_DEST_AC3 FIELD32(0x000000c0)
873 #define TX_DMA_DST_CSR_DEST_MGMT FIELD32(0x00000300)
876 * TX_CNTL_CSR: KICK/Abort TX.
877 * KICK_TX_AC0: For AC_BK.
878 * KICK_TX_AC1: For AC_BE.
879 * KICK_TX_AC2: For AC_VI.
880 * KICK_TX_AC3: For AC_VO.
881 * ABORT_TX_AC0: For AC_BK.
882 * ABORT_TX_AC1: For AC_BE.
883 * ABORT_TX_AC2: For AC_VI.
884 * ABORT_TX_AC3: For AC_VO.
886 #define TX_CNTL_CSR 0x3430
887 #define TX_CNTL_CSR_KICK_TX_AC0 FIELD32(0x00000001)
888 #define TX_CNTL_CSR_KICK_TX_AC1 FIELD32(0x00000002)
889 #define TX_CNTL_CSR_KICK_TX_AC2 FIELD32(0x00000004)
890 #define TX_CNTL_CSR_KICK_TX_AC3 FIELD32(0x00000008)
891 #define TX_CNTL_CSR_KICK_TX_MGMT FIELD32(0x00000010)
892 #define TX_CNTL_CSR_ABORT_TX_AC0 FIELD32(0x00010000)
893 #define TX_CNTL_CSR_ABORT_TX_AC1 FIELD32(0x00020000)
894 #define TX_CNTL_CSR_ABORT_TX_AC2 FIELD32(0x00040000)
895 #define TX_CNTL_CSR_ABORT_TX_AC3 FIELD32(0x00080000)
896 #define TX_CNTL_CSR_ABORT_TX_MGMT FIELD32(0x00100000)
899 * LOAD_TX_RING_CSR: Load RX desriptor
901 #define LOAD_TX_RING_CSR 0x3434
902 #define LOAD_TX_RING_CSR_LOAD_TXD_AC0 FIELD32(0x00000001)
903 #define LOAD_TX_RING_CSR_LOAD_TXD_AC1 FIELD32(0x00000002)
904 #define LOAD_TX_RING_CSR_LOAD_TXD_AC2 FIELD32(0x00000004)
905 #define LOAD_TX_RING_CSR_LOAD_TXD_AC3 FIELD32(0x00000008)
906 #define LOAD_TX_RING_CSR_LOAD_TXD_MGMT FIELD32(0x00000010)
909 * Several read-only registers, for debugging.
911 #define AC0_TXPTR_CSR 0x3438
912 #define AC1_TXPTR_CSR 0x343c
913 #define AC2_TXPTR_CSR 0x3440
914 #define AC3_TXPTR_CSR 0x3444
915 #define MGMT_TXPTR_CSR 0x3448
920 #define RX_BASE_CSR 0x3450
921 #define RX_BASE_CSR_RING_REGISTER FIELD32(0xffffffff)
925 * RXD_SIZE: In unit of 32-bit.
927 #define RX_RING_CSR 0x3454
928 #define RX_RING_CSR_RING_SIZE FIELD32(0x000000ff)
929 #define RX_RING_CSR_RXD_SIZE FIELD32(0x00003f00)
930 #define RX_RING_CSR_RXD_WRITEBACK_SIZE FIELD32(0x00070000)
935 #define RX_CNTL_CSR 0x3458
936 #define RX_CNTL_CSR_ENABLE_RX_DMA FIELD32(0x00000001)
937 #define RX_CNTL_CSR_LOAD_RXD FIELD32(0x00000002)
940 * RXPTR_CSR: Read-only, for debugging.
942 #define RXPTR_CSR 0x345c
947 #define PCI_CFG_CSR 0x3460
952 #define BUF_FORMAT_CSR 0x3464
955 * INT_SOURCE_CSR: Interrupt source register.
956 * Write one to clear corresponding bit.
958 #define INT_SOURCE_CSR 0x3468
959 #define INT_SOURCE_CSR_TXDONE FIELD32(0x00000001)
960 #define INT_SOURCE_CSR_RXDONE FIELD32(0x00000002)
961 #define INT_SOURCE_CSR_BEACON_DONE FIELD32(0x00000004)
962 #define INT_SOURCE_CSR_TX_ABORT_DONE FIELD32(0x00000010)
963 #define INT_SOURCE_CSR_AC0_DMA_DONE FIELD32(0x00010000)
964 #define INT_SOURCE_CSR_AC1_DMA_DONE FIELD32(0x00020000)
965 #define INT_SOURCE_CSR_AC2_DMA_DONE FIELD32(0x00040000)
966 #define INT_SOURCE_CSR_AC3_DMA_DONE FIELD32(0x00080000)
967 #define INT_SOURCE_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
968 #define INT_SOURCE_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
971 * INT_MASK_CSR: Interrupt MASK register. 1: the interrupt is mask OFF.
972 * MITIGATION_PERIOD: Interrupt mitigation in unit of 32 PCI clock.
974 #define INT_MASK_CSR 0x346c
975 #define INT_MASK_CSR_TXDONE FIELD32(0x00000001)
976 #define INT_MASK_CSR_RXDONE FIELD32(0x00000002)
977 #define INT_MASK_CSR_BEACON_DONE FIELD32(0x00000004)
978 #define INT_MASK_CSR_TX_ABORT_DONE FIELD32(0x00000010)
979 #define INT_MASK_CSR_ENABLE_MITIGATION FIELD32(0x00000080)
980 #define INT_MASK_CSR_MITIGATION_PERIOD FIELD32(0x0000ff00)
981 #define INT_MASK_CSR_AC0_DMA_DONE FIELD32(0x00010000)
982 #define INT_MASK_CSR_AC1_DMA_DONE FIELD32(0x00020000)
983 #define INT_MASK_CSR_AC2_DMA_DONE FIELD32(0x00040000)
984 #define INT_MASK_CSR_AC3_DMA_DONE FIELD32(0x00080000)
985 #define INT_MASK_CSR_MGMT_DMA_DONE FIELD32(0x00100000)
986 #define INT_MASK_CSR_HCCA_DMA_DONE FIELD32(0x00200000)
989 * E2PROM_CSR: EEPROM control register.
990 * RELOAD: Write 1 to reload eeprom content.
991 * TYPE_93C46: 1: 93c46, 0:93c66.
992 * LOAD_STATUS: 1:loading, 0:done.
994 #define E2PROM_CSR 0x3470
995 #define E2PROM_CSR_RELOAD FIELD32(0x00000001)
996 #define E2PROM_CSR_DATA_CLOCK FIELD32(0x00000002)
997 #define E2PROM_CSR_CHIP_SELECT FIELD32(0x00000004)
998 #define E2PROM_CSR_DATA_IN FIELD32(0x00000008)
999 #define E2PROM_CSR_DATA_OUT FIELD32(0x00000010)
1000 #define E2PROM_CSR_TYPE_93C46 FIELD32(0x00000020)
1001 #define E2PROM_CSR_LOAD_STATUS FIELD32(0x00000040)
1004 * AC_TXOP_CSR0: AC_BK/AC_BE TXOP register.
1005 * AC0_TX_OP: For AC_BK, in unit of 32us.
1006 * AC1_TX_OP: For AC_BE, in unit of 32us.
1008 #define AC_TXOP_CSR0 0x3474
1009 #define AC_TXOP_CSR0_AC0_TX_OP FIELD32(0x0000ffff)
1010 #define AC_TXOP_CSR0_AC1_TX_OP FIELD32(0xffff0000)
1013 * AC_TXOP_CSR1: AC_VO/AC_VI TXOP register.
1014 * AC2_TX_OP: For AC_VI, in unit of 32us.
1015 * AC3_TX_OP: For AC_VO, in unit of 32us.
1017 #define AC_TXOP_CSR1 0x3478
1018 #define AC_TXOP_CSR1_AC2_TX_OP FIELD32(0x0000ffff)
1019 #define AC_TXOP_CSR1_AC3_TX_OP FIELD32(0xffff0000)
1024 #define DMA_STATUS_CSR 0x3480
1029 #define TEST_MODE_CSR 0x3484
1034 #define UART0_TX_CSR 0x3488
1039 #define UART0_RX_CSR 0x348c
1044 #define UART0_FRAME_CSR 0x3490
1049 #define UART0_BUFFER_CSR 0x3494
1053 * RF_PS: Set RF interface value to power save
1055 #define IO_CNTL_CSR 0x3498
1056 #define IO_CNTL_CSR_RF_PS FIELD32(0x00000004)
1059 * UART_INT_SOURCE_CSR
1061 #define UART_INT_SOURCE_CSR 0x34a8
1066 #define UART_INT_MASK_CSR 0x34ac
1071 #define PBF_QUEUE_CSR 0x34b0
1074 * Firmware DMA registers.
1075 * Firmware DMA registers are dedicated for MCU usage
1076 * and should not be touched by host driver.
1077 * Therefore we skip the definition of these registers.
1079 #define FW_TX_BASE_CSR 0x34c0
1080 #define FW_TX_START_CSR 0x34c4
1081 #define FW_TX_LAST_CSR 0x34c8
1082 #define FW_MODE_CNTL_CSR 0x34cc
1083 #define FW_TXPTR_CSR 0x34d0
1086 * 8051 firmware image.
1088 #define FIRMWARE_RT2561 "rt2561.bin"
1089 #define FIRMWARE_RT2561s "rt2561s.bin"
1090 #define FIRMWARE_RT2661 "rt2661.bin"
1091 #define FIRMWARE_IMAGE_BASE 0x4000
1095 * The wordsize of the BBP is 8 bits.
1101 #define BBP_R2_BG_MODE FIELD8(0x20)
1106 #define BBP_R3_SMART_MODE FIELD8(0x01)
1109 * R4: RX antenna control
1110 * FRAME_END: 1 - DPDT, 0 - SPDT (Only valid for 802.11G, RF2527 & RF2529)
1114 * ANTENNA_CONTROL semantics (guessed):
1115 * 0x1: Software controlled antenna switching (fixed or SW diversity)
1116 * 0x2: Hardware diversity.
1118 #define BBP_R4_RX_ANTENNA_CONTROL FIELD8(0x03)
1119 #define BBP_R4_RX_FRAME_END FIELD8(0x20)
1124 #define BBP_R77_RX_ANTENNA FIELD8(0x03)
1133 #define RF3_TXPOWER FIELD32(0x00003e00)
1138 #define RF4_FREQ_OFFSET FIELD32(0x0003f000)
1142 * The wordsize of the EEPROM is 16 bits.
1148 #define EEPROM_MAC_ADDR_0 0x0002
1149 #define EEPROM_MAC_ADDR_BYTE0 FIELD16(0x00ff)
1150 #define EEPROM_MAC_ADDR_BYTE1 FIELD16(0xff00)
1151 #define EEPROM_MAC_ADDR1 0x0003
1152 #define EEPROM_MAC_ADDR_BYTE2 FIELD16(0x00ff)
1153 #define EEPROM_MAC_ADDR_BYTE3 FIELD16(0xff00)
1154 #define EEPROM_MAC_ADDR_2 0x0004
1155 #define EEPROM_MAC_ADDR_BYTE4 FIELD16(0x00ff)
1156 #define EEPROM_MAC_ADDR_BYTE5 FIELD16(0xff00)
1160 * ANTENNA_NUM: Number of antenna's.
1161 * TX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1162 * RX_DEFAULT: Default antenna 0: diversity, 1: A, 2: B.
1163 * FRAME_TYPE: 0: DPDT , 1: SPDT , noted this bit is valid for g only.
1164 * DYN_TXAGC: Dynamic TX AGC control.
1165 * HARDWARE_RADIO: 1: Hardware controlled radio. Read GPIO0.
1166 * RF_TYPE: Rf_type of this adapter.
1168 #define EEPROM_ANTENNA 0x0010
1169 #define EEPROM_ANTENNA_NUM FIELD16(0x0003)
1170 #define EEPROM_ANTENNA_TX_DEFAULT FIELD16(0x000c)
1171 #define EEPROM_ANTENNA_RX_DEFAULT FIELD16(0x0030)
1172 #define EEPROM_ANTENNA_FRAME_TYPE FIELD16(0x0040)
1173 #define EEPROM_ANTENNA_DYN_TXAGC FIELD16(0x0200)
1174 #define EEPROM_ANTENNA_HARDWARE_RADIO FIELD16(0x0400)
1175 #define EEPROM_ANTENNA_RF_TYPE FIELD16(0xf800)
1178 * EEPROM NIC config.
1179 * ENABLE_DIVERSITY: 1:enable, 0:disable.
1180 * EXTERNAL_LNA_BG: External LNA enable for 2.4G.
1181 * CARDBUS_ACCEL: 0:enable, 1:disable.
1182 * EXTERNAL_LNA_A: External LNA enable for 5G.
1184 #define EEPROM_NIC 0x0011
1185 #define EEPROM_NIC_ENABLE_DIVERSITY FIELD16(0x0001)
1186 #define EEPROM_NIC_TX_DIVERSITY FIELD16(0x0002)
1187 #define EEPROM_NIC_RX_FIXED FIELD16(0x0004)
1188 #define EEPROM_NIC_TX_FIXED FIELD16(0x0008)
1189 #define EEPROM_NIC_EXTERNAL_LNA_BG FIELD16(0x0010)
1190 #define EEPROM_NIC_CARDBUS_ACCEL FIELD16(0x0020)
1191 #define EEPROM_NIC_EXTERNAL_LNA_A FIELD16(0x0040)
1195 * GEO_A: Default geographical setting for 5GHz band
1196 * GEO: Default geographical setting.
1198 #define EEPROM_GEOGRAPHY 0x0012
1199 #define EEPROM_GEOGRAPHY_GEO_A FIELD16(0x00ff)
1200 #define EEPROM_GEOGRAPHY_GEO FIELD16(0xff00)
1205 #define EEPROM_BBP_START 0x0013
1206 #define EEPROM_BBP_SIZE 16
1207 #define EEPROM_BBP_VALUE FIELD16(0x00ff)
1208 #define EEPROM_BBP_REG_ID FIELD16(0xff00)
1211 * EEPROM TXPOWER 802.11G
1213 #define EEPROM_TXPOWER_G_START 0x0023
1214 #define EEPROM_TXPOWER_G_SIZE 7
1215 #define EEPROM_TXPOWER_G_1 FIELD16(0x00ff)
1216 #define EEPROM_TXPOWER_G_2 FIELD16(0xff00)
1221 #define EEPROM_FREQ 0x002f
1222 #define EEPROM_FREQ_OFFSET FIELD16(0x00ff)
1223 #define EEPROM_FREQ_SEQ_MASK FIELD16(0xff00)
1224 #define EEPROM_FREQ_SEQ FIELD16(0x0300)
1228 * POLARITY_RDY_G: Polarity RDY_G setting.
1229 * POLARITY_RDY_A: Polarity RDY_A setting.
1230 * POLARITY_ACT: Polarity ACT setting.
1231 * POLARITY_GPIO_0: Polarity GPIO0 setting.
1232 * POLARITY_GPIO_1: Polarity GPIO1 setting.
1233 * POLARITY_GPIO_2: Polarity GPIO2 setting.
1234 * POLARITY_GPIO_3: Polarity GPIO3 setting.
1235 * POLARITY_GPIO_4: Polarity GPIO4 setting.
1236 * LED_MODE: Led mode.
1238 #define EEPROM_LED 0x0030
1239 #define EEPROM_LED_POLARITY_RDY_G FIELD16(0x0001)
1240 #define EEPROM_LED_POLARITY_RDY_A FIELD16(0x0002)
1241 #define EEPROM_LED_POLARITY_ACT FIELD16(0x0004)
1242 #define EEPROM_LED_POLARITY_GPIO_0 FIELD16(0x0008)
1243 #define EEPROM_LED_POLARITY_GPIO_1 FIELD16(0x0010)
1244 #define EEPROM_LED_POLARITY_GPIO_2 FIELD16(0x0020)
1245 #define EEPROM_LED_POLARITY_GPIO_3 FIELD16(0x0040)
1246 #define EEPROM_LED_POLARITY_GPIO_4 FIELD16(0x0080)
1247 #define EEPROM_LED_LED_MODE FIELD16(0x1f00)
1250 * EEPROM TXPOWER 802.11A
1252 #define EEPROM_TXPOWER_A_START 0x0031
1253 #define EEPROM_TXPOWER_A_SIZE 12
1254 #define EEPROM_TXPOWER_A_1 FIELD16(0x00ff)
1255 #define EEPROM_TXPOWER_A_2 FIELD16(0xff00)
1258 * EEPROM RSSI offset 802.11BG
1260 #define EEPROM_RSSI_OFFSET_BG 0x004d
1261 #define EEPROM_RSSI_OFFSET_BG_1 FIELD16(0x00ff)
1262 #define EEPROM_RSSI_OFFSET_BG_2 FIELD16(0xff00)
1265 * EEPROM RSSI offset 802.11A
1267 #define EEPROM_RSSI_OFFSET_A 0x004e
1268 #define EEPROM_RSSI_OFFSET_A_1 FIELD16(0x00ff)
1269 #define EEPROM_RSSI_OFFSET_A_2 FIELD16(0xff00)
1272 * MCU mailbox commands.
1274 #define MCU_SLEEP 0x30
1275 #define MCU_WAKEUP 0x31
1276 #define MCU_LED 0x50
1277 #define MCU_LED_STRENGTH 0x52
1280 * DMA descriptor defines.
1282 #define TXD_DESC_SIZE ( 16 * sizeof(__le32) )
1283 #define TXINFO_SIZE ( 6 * sizeof(__le32) )
1284 #define RXD_DESC_SIZE ( 16 * sizeof(__le32) )
1287 * TX descriptor format for TX, PRIO and Beacon Ring.
1292 * TKIP_MIC: ASIC appends TKIP MIC if TKIP is used.
1293 * KEY_TABLE: Use per-client pairwise KEY table.
1295 * Key index (0~31) to the pairwise KEY table.
1296 * 0~3 to shared KEY table 0 (BSS0).
1297 * 4~7 to shared KEY table 1 (BSS1).
1298 * 8~11 to shared KEY table 2 (BSS2).
1299 * 12~15 to shared KEY table 3 (BSS3).
1300 * BURST: Next frame belongs to same "burst" event.
1302 #define TXD_W0_OWNER_NIC FIELD32(0x00000001)
1303 #define TXD_W0_VALID FIELD32(0x00000002)
1304 #define TXD_W0_MORE_FRAG FIELD32(0x00000004)
1305 #define TXD_W0_ACK FIELD32(0x00000008)
1306 #define TXD_W0_TIMESTAMP FIELD32(0x00000010)
1307 #define TXD_W0_OFDM FIELD32(0x00000020)
1308 #define TXD_W0_IFS FIELD32(0x00000040)
1309 #define TXD_W0_RETRY_MODE FIELD32(0x00000080)
1310 #define TXD_W0_TKIP_MIC FIELD32(0x00000100)
1311 #define TXD_W0_KEY_TABLE FIELD32(0x00000200)
1312 #define TXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1313 #define TXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1314 #define TXD_W0_BURST FIELD32(0x10000000)
1315 #define TXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1319 * HOST_Q_ID: EDCA/HCCA queue ID.
1320 * HW_SEQUENCE: MAC overwrites the frame sequence number.
1321 * BUFFER_COUNT: Number of buffers in this TXD.
1323 #define TXD_W1_HOST_Q_ID FIELD32(0x0000000f)
1324 #define TXD_W1_AIFSN FIELD32(0x000000f0)
1325 #define TXD_W1_CWMIN FIELD32(0x00000f00)
1326 #define TXD_W1_CWMAX FIELD32(0x0000f000)
1327 #define TXD_W1_IV_OFFSET FIELD32(0x003f0000)
1328 #define TXD_W1_PIGGY_BACK FIELD32(0x01000000)
1329 #define TXD_W1_HW_SEQUENCE FIELD32(0x10000000)
1330 #define TXD_W1_BUFFER_COUNT FIELD32(0xe0000000)
1333 * Word2: PLCP information
1335 #define TXD_W2_PLCP_SIGNAL FIELD32(0x000000ff)
1336 #define TXD_W2_PLCP_SERVICE FIELD32(0x0000ff00)
1337 #define TXD_W2_PLCP_LENGTH_LOW FIELD32(0x00ff0000)
1338 #define TXD_W2_PLCP_LENGTH_HIGH FIELD32(0xff000000)
1343 #define TXD_W3_IV FIELD32(0xffffffff)
1348 #define TXD_W4_EIV FIELD32(0xffffffff)
1352 * FRAME_OFFSET: Frame start offset inside ASIC TXFIFO (after TXINFO field).
1353 * TXD_W5_PID_SUBTYPE: Driver assigned packet ID index for txdone handler.
1354 * TXD_W5_PID_TYPE: Driver assigned packet ID type for txdone handler.
1355 * WAITING_DMA_DONE_INT: TXD been filled with data
1356 * and waiting for TxDoneISR housekeeping.
1358 #define TXD_W5_FRAME_OFFSET FIELD32(0x000000ff)
1359 #define TXD_W5_PID_SUBTYPE FIELD32(0x00001f00)
1360 #define TXD_W5_PID_TYPE FIELD32(0x0000e000)
1361 #define TXD_W5_TX_POWER FIELD32(0x00ff0000)
1362 #define TXD_W5_WAITING_DMA_DONE_INT FIELD32(0x01000000)
1365 * the above 24-byte is called TXINFO and will be DMAed to MAC block
1366 * through TXFIFO. MAC block use this TXINFO to control the transmission
1367 * behavior of this frame.
1368 * The following fields are not used by MAC block.
1369 * They are used by DMA block and HOST driver only.
1370 * Once a frame has been DMA to ASIC, all the following fields are useless
1375 * Word6-10: Buffer physical address
1377 #define TXD_W6_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1378 #define TXD_W7_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1379 #define TXD_W8_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1380 #define TXD_W9_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1381 #define TXD_W10_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1384 * Word11-13: Buffer length
1386 #define TXD_W11_BUFFER_LENGTH0 FIELD32(0x00000fff)
1387 #define TXD_W11_BUFFER_LENGTH1 FIELD32(0x0fff0000)
1388 #define TXD_W12_BUFFER_LENGTH2 FIELD32(0x00000fff)
1389 #define TXD_W12_BUFFER_LENGTH3 FIELD32(0x0fff0000)
1390 #define TXD_W13_BUFFER_LENGTH4 FIELD32(0x00000fff)
1395 #define TXD_W14_SK_BUFFER FIELD32(0xffffffff)
1400 #define TXD_W15_NEXT_SK_BUFFER FIELD32(0xffffffff)
1403 * RX descriptor format for RX Ring.
1408 * CIPHER_ERROR: 1:ICV error, 2:MIC error, 3:invalid key.
1409 * KEY_INDEX: Decryption key actually used.
1411 #define RXD_W0_OWNER_NIC FIELD32(0x00000001)
1412 #define RXD_W0_DROP FIELD32(0x00000002)
1413 #define RXD_W0_UNICAST_TO_ME FIELD32(0x00000004)
1414 #define RXD_W0_MULTICAST FIELD32(0x00000008)
1415 #define RXD_W0_BROADCAST FIELD32(0x00000010)
1416 #define RXD_W0_MY_BSS FIELD32(0x00000020)
1417 #define RXD_W0_CRC_ERROR FIELD32(0x00000040)
1418 #define RXD_W0_OFDM FIELD32(0x00000080)
1419 #define RXD_W0_CIPHER_ERROR FIELD32(0x00000300)
1420 #define RXD_W0_KEY_INDEX FIELD32(0x0000fc00)
1421 #define RXD_W0_DATABYTE_COUNT FIELD32(0x0fff0000)
1422 #define RXD_W0_CIPHER_ALG FIELD32(0xe0000000)
1426 * SIGNAL: RX raw data rate reported by BBP.
1428 #define RXD_W1_SIGNAL FIELD32(0x000000ff)
1429 #define RXD_W1_RSSI_AGC FIELD32(0x00001f00)
1430 #define RXD_W1_RSSI_LNA FIELD32(0x00006000)
1431 #define RXD_W1_FRAME_OFFSET FIELD32(0x7f000000)
1435 * IV: Received IV of originally encrypted.
1437 #define RXD_W2_IV FIELD32(0xffffffff)
1441 * EIV: Received EIV of originally encrypted.
1443 #define RXD_W3_EIV FIELD32(0xffffffff)
1447 * ICV: Received ICV of originally encrypted.
1448 * NOTE: This is a guess, the official definition is "reserved"
1450 #define RXD_W4_ICV FIELD32(0xffffffff)
1453 * the above 20-byte is called RXINFO and will be DMAed to MAC RX block
1454 * and passed to the HOST driver.
1455 * The following fields are for DMA block and HOST usage only.
1456 * Can't be touched by ASIC MAC block.
1462 #define RXD_W5_BUFFER_PHYSICAL_ADDRESS FIELD32(0xffffffff)
1465 * Word6-15: Reserved
1467 #define RXD_W6_RESERVED FIELD32(0xffffffff)
1468 #define RXD_W7_RESERVED FIELD32(0xffffffff)
1469 #define RXD_W8_RESERVED FIELD32(0xffffffff)
1470 #define RXD_W9_RESERVED FIELD32(0xffffffff)
1471 #define RXD_W10_RESERVED FIELD32(0xffffffff)
1472 #define RXD_W11_RESERVED FIELD32(0xffffffff)
1473 #define RXD_W12_RESERVED FIELD32(0xffffffff)
1474 #define RXD_W13_RESERVED FIELD32(0xffffffff)
1475 #define RXD_W14_RESERVED FIELD32(0xffffffff)
1476 #define RXD_W15_RESERVED FIELD32(0xffffffff)
1479 * Macro's for converting txpower from EEPROM to mac80211 value
1480 * and from mac80211 value to register value.
1482 #define MIN_TXPOWER 0
1483 #define MAX_TXPOWER 31
1484 #define DEFAULT_TXPOWER 24
1486 #define TXPOWER_FROM_DEV(__txpower) \
1487 (((u8)(__txpower)) > MAX_TXPOWER) ? DEFAULT_TXPOWER : (__txpower)
1489 #define TXPOWER_TO_DEV(__txpower) \
1490 clamp_t(char, __txpower, MIN_TXPOWER, MAX_TXPOWER)
1492 #endif /* RT61PCI_H */