git.oblomov.eu Git - linux-2.6/blob - arch/powerpc/platforms/cell/spufs/switch.c

   1 /*
   2  * spu_switch.c
   3  *
   4  * (C) Copyright IBM Corp. 2005
   5  *
   6  * Author: Mark Nutter <mnutter@us.ibm.com>
   7  *
   8  * Host-side part of SPU context switch sequence outlined in
   9  * Synergistic Processor Element, Book IV.
  10  *
  11  * A fully premptive switch of an SPE is very expensive in terms
  12  * of time and system resources.  SPE Book IV indicates that SPE
  13  * allocation should follow a "serially reusable device" model,
  14  * in which the SPE is assigned a task until it completes.  When
  15  * this is not possible, this sequence may be used to premptively
  16  * save, and then later (optionally) restore the context of a
  17  * program executing on an SPE.
  18  *
  19  *
  20  * This program is free software; you can redistribute it and/or modify
  21  * it under the terms of the GNU General Public License as published by
  22  * the Free Software Foundation; either version 2, or (at your option)
  23  * any later version.
  24  *
  25  * This program is distributed in the hope that it will be useful,
  26  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  27  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  28  * GNU General Public License for more details.
  29  *
  30  * You should have received a copy of the GNU General Public License
  31  * along with this program; if not, write to the Free Software
  32  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  33  */
  34
  35 #include <linux/module.h>
  36 #include <linux/errno.h>
  37 #include <linux/sched.h>
  38 #include <linux/kernel.h>
  39 #include <linux/mm.h>
  40 #include <linux/vmalloc.h>
  41 #include <linux/smp.h>
  42 #include <linux/smp_lock.h>
  43 #include <linux/stddef.h>
  44 #include <linux/unistd.h>
  45
  46 #include <asm/io.h>
  47 #include <asm/spu.h>
  48 #include <asm/spu_priv1.h>
  49 #include <asm/spu_csa.h>
  50 #include <asm/mmu_context.h>
  51
  52 #include "spu_save_dump.h"
  53 #include "spu_restore_dump.h"
  54
  55 #if 0
  56 #define POLL_WHILE_TRUE(_c) {                           \
  57     do {                                                \
  58     } while (_c);                                       \
  59   }
  60 #else
  61 #define RELAX_SPIN_COUNT                                1000
  62 #define POLL_WHILE_TRUE(_c) {                           \
  63     do {                                                \
  64         int _i;                                         \
  65         for (_i=0; _i<RELAX_SPIN_COUNT && (_c); _i++) { \
  66             cpu_relax();                                \
  67         }                                               \
  68         if (unlikely(_c)) yield();                      \
  69         else break;                                     \
  70     } while (_c);                                       \
  71   }
  72 #endif                          /* debug */
  73
  74 #define POLL_WHILE_FALSE(_c)    POLL_WHILE_TRUE(!(_c))
  75
  76 static inline void acquire_spu_lock(struct spu *spu)
  77 {
  78         /* Save, Step 1:
  79          * Restore, Step 1:
  80          *    Acquire SPU-specific mutual exclusion lock.
  81          *    TBD.
  82          */
  83 }
  84
  85 static inline void release_spu_lock(struct spu *spu)
  86 {
  87         /* Restore, Step 76:
  88          *    Release SPU-specific mutual exclusion lock.
  89          *    TBD.
  90          */
  91 }
  92
  93 static inline int check_spu_isolate(struct spu_state *csa, struct spu *spu)
  94 {
  95         struct spu_problem __iomem *prob = spu->problem;
  96         u32 isolate_state;
  97
  98         /* Save, Step 2:
  99          * Save, Step 6:
 100          *     If SPU_Status[E,L,IS] any field is '1', this
 101          *     SPU is in isolate state and cannot be context
 102          *     saved at this time.
 103          */
 104         isolate_state = SPU_STATUS_ISOLATED_STATE |
 105             SPU_STATUS_ISOLATED_LOAD_STATUS | SPU_STATUS_ISOLATED_EXIT_STATUS;
 106         return (in_be32(&prob->spu_status_R) & isolate_state) ? 1 : 0;
 107 }
 108
 109 static inline void disable_interrupts(struct spu_state *csa, struct spu *spu)
 110 {
 111         /* Save, Step 3:
 112          * Restore, Step 2:
 113          *     Save INT_Mask_class0 in CSA.
 114          *     Write INT_MASK_class0 with value of 0.
 115          *     Save INT_Mask_class1 in CSA.
 116          *     Write INT_MASK_class1 with value of 0.
 117          *     Save INT_Mask_class2 in CSA.
 118          *     Write INT_MASK_class2 with value of 0.
 119          */
 120         spin_lock_irq(&spu->register_lock);
 121         if (csa) {
 122                 csa->priv1.int_mask_class0_RW = spu_int_mask_get(spu, 0);
 123                 csa->priv1.int_mask_class1_RW = spu_int_mask_get(spu, 1);
 124                 csa->priv1.int_mask_class2_RW = spu_int_mask_get(spu, 2);
 125         }
 126         spu_int_mask_set(spu, 0, 0ul);
 127         spu_int_mask_set(spu, 1, 0ul);
 128         spu_int_mask_set(spu, 2, 0ul);
 129         eieio();
 130         spin_unlock_irq(&spu->register_lock);
 131 }
 132
 133 static inline void set_watchdog_timer(struct spu_state *csa, struct spu *spu)
 134 {
 135         /* Save, Step 4:
 136          * Restore, Step 25.
 137          *    Set a software watchdog timer, which specifies the
 138          *    maximum allowable time for a context save sequence.
 139          *
 140          *    For present, this implementation will not set a global
 141          *    watchdog timer, as virtualization & variable system load
 142          *    may cause unpredictable execution times.
 143          */
 144 }
 145
 146 static inline void inhibit_user_access(struct spu_state *csa, struct spu *spu)
 147 {
 148         /* Save, Step 5:
 149          * Restore, Step 3:
 150          *     Inhibit user-space access (if provided) to this
 151          *     SPU by unmapping the virtual pages assigned to
 152          *     the SPU memory-mapped I/O (MMIO) for problem
 153          *     state. TBD.
 154          */
 155 }
 156
 157 static inline void set_switch_pending(struct spu_state *csa, struct spu *spu)
 158 {
 159         /* Save, Step 7:
 160          * Restore, Step 5:
 161          *     Set a software context switch pending flag.
 162          */
 163         set_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 164         mb();
 165 }
 166
 167 static inline void save_mfc_cntl(struct spu_state *csa, struct spu *spu)
 168 {
 169         struct spu_priv2 __iomem *priv2 = spu->priv2;
 170
 171         /* Save, Step 8:
 172          *     Suspend DMA and save MFC_CNTL.
 173          */
 174         switch (in_be64(&priv2->mfc_control_RW) &
 175                MFC_CNTL_SUSPEND_DMA_STATUS_MASK) {
 176         case MFC_CNTL_SUSPEND_IN_PROGRESS:
 177                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 178                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 179                                  MFC_CNTL_SUSPEND_COMPLETE);
 180                 /* fall through */
 181         case MFC_CNTL_SUSPEND_COMPLETE:
 182                 if (csa) {
 183                         csa->priv2.mfc_control_RW =
 184                                 in_be64(&priv2->mfc_control_RW) |
 185                                 MFC_CNTL_SUSPEND_DMA_QUEUE;
 186                 }
 187                 break;
 188         case MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION:
 189                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE);
 190                 POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 191                                   MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 192                                  MFC_CNTL_SUSPEND_COMPLETE);
 193                 if (csa) {
 194                         csa->priv2.mfc_control_RW =
 195                                 in_be64(&priv2->mfc_control_RW) &
 196                                 ~MFC_CNTL_SUSPEND_DMA_QUEUE;
 197                 }
 198                 break;
 199         }
 200 }
 201
 202 static inline void save_spu_runcntl(struct spu_state *csa, struct spu *spu)
 203 {
 204         struct spu_problem __iomem *prob = spu->problem;
 205
 206         /* Save, Step 9:
 207          *     Save SPU_Runcntl in the CSA.  This value contains
 208          *     the "Application Desired State".
 209          */
 210         csa->prob.spu_runcntl_RW = in_be32(&prob->spu_runcntl_RW);
 211 }
 212
 213 static inline void save_mfc_sr1(struct spu_state *csa, struct spu *spu)
 214 {
 215         /* Save, Step 10:
 216          *     Save MFC_SR1 in the CSA.
 217          */
 218         csa->priv1.mfc_sr1_RW = spu_mfc_sr1_get(spu);
 219 }
 220
 221 static inline void save_spu_status(struct spu_state *csa, struct spu *spu)
 222 {
 223         struct spu_problem __iomem *prob = spu->problem;
 224
 225         /* Save, Step 11:
 226          *     Read SPU_Status[R], and save to CSA.
 227          */
 228         if ((in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) == 0) {
 229                 csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 230         } else {
 231                 u32 stopped;
 232
 233                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
 234                 eieio();
 235                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
 236                                 SPU_STATUS_RUNNING);
 237                 stopped =
 238                     SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP |
 239                     SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
 240                 if ((in_be32(&prob->spu_status_R) & stopped) == 0)
 241                         csa->prob.spu_status_R = SPU_STATUS_RUNNING;
 242                 else
 243                         csa->prob.spu_status_R = in_be32(&prob->spu_status_R);
 244         }
 245 }
 246
 247 static inline void save_mfc_decr(struct spu_state *csa, struct spu *spu)
 248 {
 249         struct spu_priv2 __iomem *priv2 = spu->priv2;
 250
 251         /* Save, Step 12:
 252          *     Read MFC_CNTL[Ds].  Update saved copy of
 253          *     CSA.MFC_CNTL[Ds].
 254          */
 255         if (in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DECREMENTER_RUNNING) {
 256                 csa->priv2.mfc_control_RW |= MFC_CNTL_DECREMENTER_RUNNING;
 257                 csa->suspend_time = get_cycles();
 258                 out_be64(&priv2->spu_chnlcntptr_RW, 7ULL);
 259                 eieio();
 260                 csa->spu_chnldata_RW[7] = in_be64(&priv2->spu_chnldata_RW);
 261                 eieio();
 262         } else {
 263                 csa->priv2.mfc_control_RW &= ~MFC_CNTL_DECREMENTER_RUNNING;
 264         }
 265 }
 266
 267 static inline void halt_mfc_decr(struct spu_state *csa, struct spu *spu)
 268 {
 269         struct spu_priv2 __iomem *priv2 = spu->priv2;
 270
 271         /* Save, Step 13:
 272          *     Write MFC_CNTL[Dh] set to a '1' to halt
 273          *     the decrementer.
 274          */
 275         out_be64(&priv2->mfc_control_RW, MFC_CNTL_DECREMENTER_HALTED);
 276         eieio();
 277 }
 278
 279 static inline void save_timebase(struct spu_state *csa, struct spu *spu)
 280 {
 281         /* Save, Step 14:
 282          *    Read PPE Timebase High and Timebase low registers
 283          *    and save in CSA.  TBD.
 284          */
 285         csa->suspend_time = get_cycles();
 286 }
 287
 288 static inline void remove_other_spu_access(struct spu_state *csa,
 289                                            struct spu *spu)
 290 {
 291         /* Save, Step 15:
 292          *     Remove other SPU access to this SPU by unmapping
 293          *     this SPU's pages from their address space.  TBD.
 294          */
 295 }
 296
 297 static inline void do_mfc_mssync(struct spu_state *csa, struct spu *spu)
 298 {
 299         struct spu_problem __iomem *prob = spu->problem;
 300
 301         /* Save, Step 16:
 302          * Restore, Step 11.
 303          *     Write SPU_MSSync register. Poll SPU_MSSync[P]
 304          *     for a value of 0.
 305          */
 306         out_be64(&prob->spc_mssync_RW, 1UL);
 307         POLL_WHILE_TRUE(in_be64(&prob->spc_mssync_RW) & MS_SYNC_PENDING);
 308 }
 309
 310 static inline void issue_mfc_tlbie(struct spu_state *csa, struct spu *spu)
 311 {
 312         /* Save, Step 17:
 313          * Restore, Step 12.
 314          * Restore, Step 48.
 315          *     Write TLB_Invalidate_Entry[IS,VPN,L,Lp]=0 register.
 316          *     Then issue a PPE sync instruction.
 317          */
 318         spu_tlb_invalidate(spu);
 319         mb();
 320 }
 321
 322 static inline void handle_pending_interrupts(struct spu_state *csa,
 323                                              struct spu *spu)
 324 {
 325         /* Save, Step 18:
 326          *     Handle any pending interrupts from this SPU
 327          *     here.  This is OS or hypervisor specific.  One
 328          *     option is to re-enable interrupts to handle any
 329          *     pending interrupts, with the interrupt handlers
 330          *     recognizing the software Context Switch Pending
 331          *     flag, to ensure the SPU execution or MFC command
 332          *     queue is not restarted.  TBD.
 333          */
 334 }
 335
 336 static inline void save_mfc_queues(struct spu_state *csa, struct spu *spu)
 337 {
 338         struct spu_priv2 __iomem *priv2 = spu->priv2;
 339         int i;
 340
 341         /* Save, Step 19:
 342          *     If MFC_Cntl[Se]=0 then save
 343          *     MFC command queues.
 344          */
 345         if ((in_be64(&priv2->mfc_control_RW) & MFC_CNTL_DMA_QUEUES_EMPTY) == 0) {
 346                 for (i = 0; i < 8; i++) {
 347                         csa->priv2.puq[i].mfc_cq_data0_RW =
 348                             in_be64(&priv2->puq[i].mfc_cq_data0_RW);
 349                         csa->priv2.puq[i].mfc_cq_data1_RW =
 350                             in_be64(&priv2->puq[i].mfc_cq_data1_RW);
 351                         csa->priv2.puq[i].mfc_cq_data2_RW =
 352                             in_be64(&priv2->puq[i].mfc_cq_data2_RW);
 353                         csa->priv2.puq[i].mfc_cq_data3_RW =
 354                             in_be64(&priv2->puq[i].mfc_cq_data3_RW);
 355                 }
 356                 for (i = 0; i < 16; i++) {
 357                         csa->priv2.spuq[i].mfc_cq_data0_RW =
 358                             in_be64(&priv2->spuq[i].mfc_cq_data0_RW);
 359                         csa->priv2.spuq[i].mfc_cq_data1_RW =
 360                             in_be64(&priv2->spuq[i].mfc_cq_data1_RW);
 361                         csa->priv2.spuq[i].mfc_cq_data2_RW =
 362                             in_be64(&priv2->spuq[i].mfc_cq_data2_RW);
 363                         csa->priv2.spuq[i].mfc_cq_data3_RW =
 364                             in_be64(&priv2->spuq[i].mfc_cq_data3_RW);
 365                 }
 366         }
 367 }
 368
 369 static inline void save_ppu_querymask(struct spu_state *csa, struct spu *spu)
 370 {
 371         struct spu_problem __iomem *prob = spu->problem;
 372
 373         /* Save, Step 20:
 374          *     Save the PPU_QueryMask register
 375          *     in the CSA.
 376          */
 377         csa->prob.dma_querymask_RW = in_be32(&prob->dma_querymask_RW);
 378 }
 379
 380 static inline void save_ppu_querytype(struct spu_state *csa, struct spu *spu)
 381 {
 382         struct spu_problem __iomem *prob = spu->problem;
 383
 384         /* Save, Step 21:
 385          *     Save the PPU_QueryType register
 386          *     in the CSA.
 387          */
 388         csa->prob.dma_querytype_RW = in_be32(&prob->dma_querytype_RW);
 389 }
 390
 391 static inline void save_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
 392 {
 393         struct spu_priv2 __iomem *priv2 = spu->priv2;
 394
 395         /* Save, Step 22:
 396          *     Save the MFC_CSR_TSQ register
 397          *     in the LSCSA.
 398          */
 399         csa->priv2.spu_tag_status_query_RW =
 400             in_be64(&priv2->spu_tag_status_query_RW);
 401 }
 402
 403 static inline void save_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
 404 {
 405         struct spu_priv2 __iomem *priv2 = spu->priv2;
 406
 407         /* Save, Step 23:
 408          *     Save the MFC_CSR_CMD1 and MFC_CSR_CMD2
 409          *     registers in the CSA.
 410          */
 411         csa->priv2.spu_cmd_buf1_RW = in_be64(&priv2->spu_cmd_buf1_RW);
 412         csa->priv2.spu_cmd_buf2_RW = in_be64(&priv2->spu_cmd_buf2_RW);
 413 }
 414
 415 static inline void save_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
 416 {
 417         struct spu_priv2 __iomem *priv2 = spu->priv2;
 418
 419         /* Save, Step 24:
 420          *     Save the MFC_CSR_ATO register in
 421          *     the CSA.
 422          */
 423         csa->priv2.spu_atomic_status_RW = in_be64(&priv2->spu_atomic_status_RW);
 424 }
 425
 426 static inline void save_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 427 {
 428         /* Save, Step 25:
 429          *     Save the MFC_TCLASS_ID register in
 430          *     the CSA.
 431          */
 432         csa->priv1.mfc_tclass_id_RW = spu_mfc_tclass_id_get(spu);
 433 }
 434
 435 static inline void set_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
 436 {
 437         /* Save, Step 26:
 438          * Restore, Step 23.
 439          *     Write the MFC_TCLASS_ID register with
 440          *     the value 0x10000000.
 441          */
 442         spu_mfc_tclass_id_set(spu, 0x10000000);
 443         eieio();
 444 }
 445
 446 static inline void purge_mfc_queue(struct spu_state *csa, struct spu *spu)
 447 {
 448         struct spu_priv2 __iomem *priv2 = spu->priv2;
 449
 450         /* Save, Step 27:
 451          * Restore, Step 14.
 452          *     Write MFC_CNTL[Pc]=1 (purge queue).
 453          */
 454         out_be64(&priv2->mfc_control_RW, MFC_CNTL_PURGE_DMA_REQUEST);
 455         eieio();
 456 }
 457
 458 static inline void wait_purge_complete(struct spu_state *csa, struct spu *spu)
 459 {
 460         struct spu_priv2 __iomem *priv2 = spu->priv2;
 461
 462         /* Save, Step 28:
 463          *     Poll MFC_CNTL[Ps] until value '11' is read
 464          *     (purge complete).
 465          */
 466         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 467                          MFC_CNTL_PURGE_DMA_STATUS_MASK) ==
 468                          MFC_CNTL_PURGE_DMA_COMPLETE);
 469 }
 470
 471 static inline void setup_mfc_sr1(struct spu_state *csa, struct spu *spu)
 472 {
 473         /* Save, Step 30:
 474          * Restore, Step 18:
 475          *     Write MFC_SR1 with MFC_SR1[D=0,S=1] and
 476          *     MFC_SR1[TL,R,Pr,T] set correctly for the
 477          *     OS specific environment.
 478          *
 479          *     Implementation note: The SPU-side code
 480          *     for save/restore is privileged, so the
 481          *     MFC_SR1[Pr] bit is not set.
 482          *
 483          */
 484         spu_mfc_sr1_set(spu, (MFC_STATE1_MASTER_RUN_CONTROL_MASK |
 485                               MFC_STATE1_RELOCATE_MASK |
 486                               MFC_STATE1_BUS_TLBIE_MASK));
 487 }
 488
 489 static inline void save_spu_npc(struct spu_state *csa, struct spu *spu)
 490 {
 491         struct spu_problem __iomem *prob = spu->problem;
 492
 493         /* Save, Step 31:
 494          *     Save SPU_NPC in the CSA.
 495          */
 496         csa->prob.spu_npc_RW = in_be32(&prob->spu_npc_RW);
 497 }
 498
 499 static inline void save_spu_privcntl(struct spu_state *csa, struct spu *spu)
 500 {
 501         struct spu_priv2 __iomem *priv2 = spu->priv2;
 502
 503         /* Save, Step 32:
 504          *     Save SPU_PrivCntl in the CSA.
 505          */
 506         csa->priv2.spu_privcntl_RW = in_be64(&priv2->spu_privcntl_RW);
 507 }
 508
 509 static inline void reset_spu_privcntl(struct spu_state *csa, struct spu *spu)
 510 {
 511         struct spu_priv2 __iomem *priv2 = spu->priv2;
 512
 513         /* Save, Step 33:
 514          * Restore, Step 16:
 515          *     Write SPU_PrivCntl[S,Le,A] fields reset to 0.
 516          */
 517         out_be64(&priv2->spu_privcntl_RW, 0UL);
 518         eieio();
 519 }
 520
 521 static inline void save_spu_lslr(struct spu_state *csa, struct spu *spu)
 522 {
 523         struct spu_priv2 __iomem *priv2 = spu->priv2;
 524
 525         /* Save, Step 34:
 526          *     Save SPU_LSLR in the CSA.
 527          */
 528         csa->priv2.spu_lslr_RW = in_be64(&priv2->spu_lslr_RW);
 529 }
 530
 531 static inline void reset_spu_lslr(struct spu_state *csa, struct spu *spu)
 532 {
 533         struct spu_priv2 __iomem *priv2 = spu->priv2;
 534
 535         /* Save, Step 35:
 536          * Restore, Step 17.
 537          *     Reset SPU_LSLR.
 538          */
 539         out_be64(&priv2->spu_lslr_RW, LS_ADDR_MASK);
 540         eieio();
 541 }
 542
 543 static inline void save_spu_cfg(struct spu_state *csa, struct spu *spu)
 544 {
 545         struct spu_priv2 __iomem *priv2 = spu->priv2;
 546
 547         /* Save, Step 36:
 548          *     Save SPU_Cfg in the CSA.
 549          */
 550         csa->priv2.spu_cfg_RW = in_be64(&priv2->spu_cfg_RW);
 551 }
 552
 553 static inline void save_pm_trace(struct spu_state *csa, struct spu *spu)
 554 {
 555         /* Save, Step 37:
 556          *     Save PM_Trace_Tag_Wait_Mask in the CSA.
 557          *     Not performed by this implementation.
 558          */
 559 }
 560
 561 static inline void save_mfc_rag(struct spu_state *csa, struct spu *spu)
 562 {
 563         /* Save, Step 38:
 564          *     Save RA_GROUP_ID register and the
 565          *     RA_ENABLE reigster in the CSA.
 566          */
 567         csa->priv1.resource_allocation_groupID_RW =
 568                 spu_resource_allocation_groupID_get(spu);
 569         csa->priv1.resource_allocation_enable_RW =
 570                 spu_resource_allocation_enable_get(spu);
 571 }
 572
 573 static inline void save_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
 574 {
 575         struct spu_problem __iomem *prob = spu->problem;
 576
 577         /* Save, Step 39:
 578          *     Save MB_Stat register in the CSA.
 579          */
 580         csa->prob.mb_stat_R = in_be32(&prob->mb_stat_R);
 581 }
 582
 583 static inline void save_ppu_mb(struct spu_state *csa, struct spu *spu)
 584 {
 585         struct spu_problem __iomem *prob = spu->problem;
 586
 587         /* Save, Step 40:
 588          *     Save the PPU_MB register in the CSA.
 589          */
 590         csa->prob.pu_mb_R = in_be32(&prob->pu_mb_R);
 591 }
 592
 593 static inline void save_ppuint_mb(struct spu_state *csa, struct spu *spu)
 594 {
 595         struct spu_priv2 __iomem *priv2 = spu->priv2;
 596
 597         /* Save, Step 41:
 598          *     Save the PPUINT_MB register in the CSA.
 599          */
 600         csa->priv2.puint_mb_R = in_be64(&priv2->puint_mb_R);
 601 }
 602
 603 static inline void save_ch_part1(struct spu_state *csa, struct spu *spu)
 604 {
 605         struct spu_priv2 __iomem *priv2 = spu->priv2;
 606         u64 idx, ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
 607         int i;
 608
 609         /* Save, Step 42:
 610          */
 611
 612         /* Save CH 1, without channel count */
 613         out_be64(&priv2->spu_chnlcntptr_RW, 1);
 614         csa->spu_chnldata_RW[1] = in_be64(&priv2->spu_chnldata_RW);
 615
 616         /* Save the following CH: [0,3,4,24,25,27] */
 617         for (i = 0; i < 7; i++) {
 618                 idx = ch_indices[i];
 619                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 620                 eieio();
 621                 csa->spu_chnldata_RW[idx] = in_be64(&priv2->spu_chnldata_RW);
 622                 csa->spu_chnlcnt_RW[idx] = in_be64(&priv2->spu_chnlcnt_RW);
 623                 out_be64(&priv2->spu_chnldata_RW, 0UL);
 624                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 625                 eieio();
 626         }
 627 }
 628
 629 static inline void save_spu_mb(struct spu_state *csa, struct spu *spu)
 630 {
 631         struct spu_priv2 __iomem *priv2 = spu->priv2;
 632         int i;
 633
 634         /* Save, Step 43:
 635          *     Save SPU Read Mailbox Channel.
 636          */
 637         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
 638         eieio();
 639         csa->spu_chnlcnt_RW[29] = in_be64(&priv2->spu_chnlcnt_RW);
 640         for (i = 0; i < 4; i++) {
 641                 csa->spu_mailbox_data[i] = in_be64(&priv2->spu_chnldata_RW);
 642         }
 643         out_be64(&priv2->spu_chnlcnt_RW, 0UL);
 644         eieio();
 645 }
 646
 647 static inline void save_mfc_cmd(struct spu_state *csa, struct spu *spu)
 648 {
 649         struct spu_priv2 __iomem *priv2 = spu->priv2;
 650
 651         /* Save, Step 44:
 652          *     Save MFC_CMD Channel.
 653          */
 654         out_be64(&priv2->spu_chnlcntptr_RW, 21UL);
 655         eieio();
 656         csa->spu_chnlcnt_RW[21] = in_be64(&priv2->spu_chnlcnt_RW);
 657         eieio();
 658 }
 659
 660 static inline void reset_ch(struct spu_state *csa, struct spu *spu)
 661 {
 662         struct spu_priv2 __iomem *priv2 = spu->priv2;
 663         u64 ch_indices[4] = { 21UL, 23UL, 28UL, 30UL };
 664         u64 ch_counts[4] = { 16UL, 1UL, 1UL, 1UL };
 665         u64 idx;
 666         int i;
 667
 668         /* Save, Step 45:
 669          *     Reset the following CH: [21, 23, 28, 30]
 670          */
 671         for (i = 0; i < 4; i++) {
 672                 idx = ch_indices[i];
 673                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
 674                 eieio();
 675                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
 676                 eieio();
 677         }
 678 }
 679
 680 static inline void resume_mfc_queue(struct spu_state *csa, struct spu *spu)
 681 {
 682         struct spu_priv2 __iomem *priv2 = spu->priv2;
 683
 684         /* Save, Step 46:
 685          * Restore, Step 25.
 686          *     Write MFC_CNTL[Sc]=0 (resume queue processing).
 687          */
 688         out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESUME_DMA_QUEUE);
 689 }
 690
 691 static inline void get_kernel_slb(u64 ea, u64 slb[2])
 692 {
 693         u64 llp;
 694
 695         if (REGION_ID(ea) == KERNEL_REGION_ID)
 696                 llp = mmu_psize_defs[mmu_linear_psize].sllp;
 697         else
 698                 llp = mmu_psize_defs[mmu_virtual_psize].sllp;
 699         slb[0] = (get_kernel_vsid(ea) << SLB_VSID_SHIFT) |
 700                 SLB_VSID_KERNEL | llp;
 701         slb[1] = (ea & ESID_MASK) | SLB_ESID_V;
 702 }
 703
 704 static inline void load_mfc_slb(struct spu *spu, u64 slb[2], int slbe)
 705 {
 706         struct spu_priv2 __iomem *priv2 = spu->priv2;
 707
 708         out_be64(&priv2->slb_index_W, slbe);
 709         eieio();
 710         out_be64(&priv2->slb_vsid_RW, slb[0]);
 711         out_be64(&priv2->slb_esid_RW, slb[1]);
 712         eieio();
 713 }
 714
 715 static inline void setup_mfc_slbs(struct spu_state *csa, struct spu *spu)
 716 {
 717         u64 code_slb[2];
 718         u64 lscsa_slb[2];
 719
 720         /* Save, Step 47:
 721          * Restore, Step 30.
 722          *     If MFC_SR1[R]=1, write 0 to SLB_Invalidate_All
 723          *     register, then initialize SLB_VSID and SLB_ESID
 724          *     to provide access to SPU context save code and
 725          *     LSCSA.
 726          *
 727          *     This implementation places both the context
 728          *     switch code and LSCSA in kernel address space.
 729          *
 730          *     Further this implementation assumes that the
 731          *     MFC_SR1[R]=1 (in other words, assume that
 732          *     translation is desired by OS environment).
 733          */
 734         spu_invalidate_slbs(spu);
 735         get_kernel_slb((unsigned long)&spu_save_code[0], code_slb);
 736         get_kernel_slb((unsigned long)csa->lscsa, lscsa_slb);
 737         load_mfc_slb(spu, code_slb, 0);
 738         if ((lscsa_slb[0] != code_slb[0]) || (lscsa_slb[1] != code_slb[1]))
 739                 load_mfc_slb(spu, lscsa_slb, 1);
 740 }
 741
 742 static inline void set_switch_active(struct spu_state *csa, struct spu *spu)
 743 {
 744         /* Save, Step 48:
 745          * Restore, Step 23.
 746          *     Change the software context switch pending flag
 747          *     to context switch active.
 748          */
 749         set_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
 750         clear_bit(SPU_CONTEXT_SWITCH_PENDING, &spu->flags);
 751         mb();
 752 }
 753
 754 static inline void enable_interrupts(struct spu_state *csa, struct spu *spu)
 755 {
 756         unsigned long class1_mask = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
 757             CLASS1_ENABLE_STORAGE_FAULT_INTR;
 758
 759         /* Save, Step 49:
 760          * Restore, Step 22:
 761          *     Reset and then enable interrupts, as
 762          *     needed by OS.
 763          *
 764          *     This implementation enables only class1
 765          *     (translation) interrupts.
 766          */
 767         spin_lock_irq(&spu->register_lock);
 768         spu_int_stat_clear(spu, 0, ~0ul);
 769         spu_int_stat_clear(spu, 1, ~0ul);
 770         spu_int_stat_clear(spu, 2, ~0ul);
 771         spu_int_mask_set(spu, 0, 0ul);
 772         spu_int_mask_set(spu, 1, class1_mask);
 773         spu_int_mask_set(spu, 2, 0ul);
 774         spin_unlock_irq(&spu->register_lock);
 775 }
 776
 777 static inline int send_mfc_dma(struct spu *spu, unsigned long ea,
 778                                unsigned int ls_offset, unsigned int size,
 779                                unsigned int tag, unsigned int rclass,
 780                                unsigned int cmd)
 781 {
 782         struct spu_problem __iomem *prob = spu->problem;
 783         union mfc_tag_size_class_cmd command;
 784         unsigned int transfer_size;
 785         volatile unsigned int status = 0x0;
 786
 787         while (size > 0) {
 788                 transfer_size =
 789                     (size > MFC_MAX_DMA_SIZE) ? MFC_MAX_DMA_SIZE : size;
 790                 command.u.mfc_size = transfer_size;
 791                 command.u.mfc_tag = tag;
 792                 command.u.mfc_rclassid = rclass;
 793                 command.u.mfc_cmd = cmd;
 794                 do {
 795                         out_be32(&prob->mfc_lsa_W, ls_offset);
 796                         out_be64(&prob->mfc_ea_W, ea);
 797                         out_be64(&prob->mfc_union_W.all64, command.all64);
 798                         status =
 799                             in_be32(&prob->mfc_union_W.by32.mfc_class_cmd32);
 800                         if (unlikely(status & 0x2)) {
 801                                 cpu_relax();
 802                         }
 803                 } while (status & 0x3);
 804                 size -= transfer_size;
 805                 ea += transfer_size;
 806                 ls_offset += transfer_size;
 807         }
 808         return 0;
 809 }
 810
 811 static inline void save_ls_16kb(struct spu_state *csa, struct spu *spu)
 812 {
 813         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
 814         unsigned int ls_offset = 0x0;
 815         unsigned int size = 16384;
 816         unsigned int tag = 0;
 817         unsigned int rclass = 0;
 818         unsigned int cmd = MFC_PUT_CMD;
 819
 820         /* Save, Step 50:
 821          *     Issue a DMA command to copy the first 16K bytes
 822          *     of local storage to the CSA.
 823          */
 824         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 825 }
 826
 827 static inline void set_spu_npc(struct spu_state *csa, struct spu *spu)
 828 {
 829         struct spu_problem __iomem *prob = spu->problem;
 830
 831         /* Save, Step 51:
 832          * Restore, Step 31.
 833          *     Write SPU_NPC[IE]=0 and SPU_NPC[LSA] to entry
 834          *     point address of context save code in local
 835          *     storage.
 836          *
 837          *     This implementation uses SPU-side save/restore
 838          *     programs with entry points at LSA of 0.
 839          */
 840         out_be32(&prob->spu_npc_RW, 0);
 841         eieio();
 842 }
 843
 844 static inline void set_signot1(struct spu_state *csa, struct spu *spu)
 845 {
 846         struct spu_problem __iomem *prob = spu->problem;
 847         union {
 848                 u64 ull;
 849                 u32 ui[2];
 850         } addr64;
 851
 852         /* Save, Step 52:
 853          * Restore, Step 32:
 854          *    Write SPU_Sig_Notify_1 register with upper 32-bits
 855          *    of the CSA.LSCSA effective address.
 856          */
 857         addr64.ull = (u64) csa->lscsa;
 858         out_be32(&prob->signal_notify1, addr64.ui[0]);
 859         eieio();
 860 }
 861
 862 static inline void set_signot2(struct spu_state *csa, struct spu *spu)
 863 {
 864         struct spu_problem __iomem *prob = spu->problem;
 865         union {
 866                 u64 ull;
 867                 u32 ui[2];
 868         } addr64;
 869
 870         /* Save, Step 53:
 871          * Restore, Step 33:
 872          *    Write SPU_Sig_Notify_2 register with lower 32-bits
 873          *    of the CSA.LSCSA effective address.
 874          */
 875         addr64.ull = (u64) csa->lscsa;
 876         out_be32(&prob->signal_notify2, addr64.ui[1]);
 877         eieio();
 878 }
 879
 880 static inline void send_save_code(struct spu_state *csa, struct spu *spu)
 881 {
 882         unsigned long addr = (unsigned long)&spu_save_code[0];
 883         unsigned int ls_offset = 0x0;
 884         unsigned int size = sizeof(spu_save_code);
 885         unsigned int tag = 0;
 886         unsigned int rclass = 0;
 887         unsigned int cmd = MFC_GETFS_CMD;
 888
 889         /* Save, Step 54:
 890          *     Issue a DMA command to copy context save code
 891          *     to local storage and start SPU.
 892          */
 893         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
 894 }
 895
 896 static inline void set_ppu_querymask(struct spu_state *csa, struct spu *spu)
 897 {
 898         struct spu_problem __iomem *prob = spu->problem;
 899
 900         /* Save, Step 55:
 901          * Restore, Step 38.
 902          *     Write PPU_QueryMask=1 (enable Tag Group 0)
 903          *     and issue eieio instruction.
 904          */
 905         out_be32(&prob->dma_querymask_RW, MFC_TAGID_TO_TAGMASK(0));
 906         eieio();
 907 }
 908
 909 static inline void wait_tag_complete(struct spu_state *csa, struct spu *spu)
 910 {
 911         struct spu_problem __iomem *prob = spu->problem;
 912         u32 mask = MFC_TAGID_TO_TAGMASK(0);
 913         unsigned long flags;
 914
 915         /* Save, Step 56:
 916          * Restore, Step 39.
 917          * Restore, Step 39.
 918          * Restore, Step 46.
 919          *     Poll PPU_TagStatus[gn] until 01 (Tag group 0 complete)
 920          *     or write PPU_QueryType[TS]=01 and wait for Tag Group
 921          *     Complete Interrupt.  Write INT_Stat_Class0 or
 922          *     INT_Stat_Class2 with value of 'handled'.
 923          */
 924         POLL_WHILE_FALSE(in_be32(&prob->dma_tagstatus_R) & mask);
 925
 926         local_irq_save(flags);
 927         spu_int_stat_clear(spu, 0, ~(0ul));
 928         spu_int_stat_clear(spu, 2, ~(0ul));
 929         local_irq_restore(flags);
 930 }
 931
 932 static inline void wait_spu_stopped(struct spu_state *csa, struct spu *spu)
 933 {
 934         struct spu_problem __iomem *prob = spu->problem;
 935         unsigned long flags;
 936
 937         /* Save, Step 57:
 938          * Restore, Step 40.
 939          *     Poll until SPU_Status[R]=0 or wait for SPU Class 0
 940          *     or SPU Class 2 interrupt.  Write INT_Stat_class0
 941          *     or INT_Stat_class2 with value of handled.
 942          */
 943         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
 944
 945         local_irq_save(flags);
 946         spu_int_stat_clear(spu, 0, ~(0ul));
 947         spu_int_stat_clear(spu, 2, ~(0ul));
 948         local_irq_restore(flags);
 949 }
 950
 951 static inline int check_save_status(struct spu_state *csa, struct spu *spu)
 952 {
 953         struct spu_problem __iomem *prob = spu->problem;
 954         u32 complete;
 955
 956         /* Save, Step 54:
 957          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
 958          *     context save succeeded, otherwise context save
 959          *     failed.
 960          */
 961         complete = ((SPU_SAVE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
 962                     SPU_STATUS_STOPPED_BY_STOP);
 963         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
 964 }
 965
 966 static inline void terminate_spu_app(struct spu_state *csa, struct spu *spu)
 967 {
 968         /* Restore, Step 4:
 969          *    If required, notify the "using application" that
 970          *    the SPU task has been terminated.  TBD.
 971          */
 972 }
 973
 974 static inline void suspend_mfc(struct spu_state *csa, struct spu *spu)
 975 {
 976         struct spu_priv2 __iomem *priv2 = spu->priv2;
 977
 978         /* Restore, Step 7:
 979          * Restore, Step 47.
 980          *     Write MFC_Cntl[Dh,Sc]='1','1' to suspend
 981          *     the queue and halt the decrementer.
 982          */
 983         out_be64(&priv2->mfc_control_RW, MFC_CNTL_SUSPEND_DMA_QUEUE |
 984                  MFC_CNTL_DECREMENTER_HALTED);
 985         eieio();
 986 }
 987
 988 static inline void wait_suspend_mfc_complete(struct spu_state *csa,
 989                                              struct spu *spu)
 990 {
 991         struct spu_priv2 __iomem *priv2 = spu->priv2;
 992
 993         /* Restore, Step 8:
 994          * Restore, Step 47.
 995          *     Poll MFC_CNTL[Ss] until 11 is returned.
 996          */
 997         POLL_WHILE_FALSE((in_be64(&priv2->mfc_control_RW) &
 998                          MFC_CNTL_SUSPEND_DMA_STATUS_MASK) ==
 999                          MFC_CNTL_SUSPEND_COMPLETE);
1000 }
1001
1002 static inline int suspend_spe(struct spu_state *csa, struct spu *spu)
1003 {
1004         struct spu_problem __iomem *prob = spu->problem;
1005
1006         /* Restore, Step 9:
1007          *    If SPU_Status[R]=1, stop SPU execution
1008          *    and wait for stop to complete.
1009          *
1010          *    Returns       1 if SPU_Status[R]=1 on entry.
1011          *                  0 otherwise
1012          */
1013         if (in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING) {
1014                 if (in_be32(&prob->spu_status_R) &
1015                     SPU_STATUS_ISOLATED_EXIT_STATUS) {
1016                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1017                                         SPU_STATUS_RUNNING);
1018                 }
1019                 if ((in_be32(&prob->spu_status_R) &
1020                      SPU_STATUS_ISOLATED_LOAD_STATUS)
1021                     || (in_be32(&prob->spu_status_R) &
1022                         SPU_STATUS_ISOLATED_STATE)) {
1023                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1024                         eieio();
1025                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1026                                         SPU_STATUS_RUNNING);
1027                         out_be32(&prob->spu_runcntl_RW, 0x2);
1028                         eieio();
1029                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1030                                         SPU_STATUS_RUNNING);
1031                 }
1032                 if (in_be32(&prob->spu_status_R) &
1033                     SPU_STATUS_WAITING_FOR_CHANNEL) {
1034                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1035                         eieio();
1036                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1037                                         SPU_STATUS_RUNNING);
1038                 }
1039                 return 1;
1040         }
1041         return 0;
1042 }
1043
1044 static inline void clear_spu_status(struct spu_state *csa, struct spu *spu)
1045 {
1046         struct spu_problem __iomem *prob = spu->problem;
1047
1048         /* Restore, Step 10:
1049          *    If SPU_Status[R]=0 and SPU_Status[E,L,IS]=1,
1050          *    release SPU from isolate state.
1051          */
1052         if (!(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING)) {
1053                 if (in_be32(&prob->spu_status_R) &
1054                     SPU_STATUS_ISOLATED_EXIT_STATUS) {
1055                         spu_mfc_sr1_set(spu,
1056                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1057                         eieio();
1058                         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1059                         eieio();
1060                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1061                                         SPU_STATUS_RUNNING);
1062                 }
1063                 if ((in_be32(&prob->spu_status_R) &
1064                      SPU_STATUS_ISOLATED_LOAD_STATUS)
1065                     || (in_be32(&prob->spu_status_R) &
1066                         SPU_STATUS_ISOLATED_STATE)) {
1067                         spu_mfc_sr1_set(spu,
1068                                         MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1069                         eieio();
1070                         out_be32(&prob->spu_runcntl_RW, 0x2);
1071                         eieio();
1072                         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1073                                         SPU_STATUS_RUNNING);
1074                 }
1075         }
1076 }
1077
1078 static inline void reset_ch_part1(struct spu_state *csa, struct spu *spu)
1079 {
1080         struct spu_priv2 __iomem *priv2 = spu->priv2;
1081         u64 ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1082         u64 idx;
1083         int i;
1084
1085         /* Restore, Step 20:
1086          */
1087
1088         /* Reset CH 1 */
1089         out_be64(&priv2->spu_chnlcntptr_RW, 1);
1090         out_be64(&priv2->spu_chnldata_RW, 0UL);
1091
1092         /* Reset the following CH: [0,3,4,24,25,27] */
1093         for (i = 0; i < 7; i++) {
1094                 idx = ch_indices[i];
1095                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1096                 eieio();
1097                 out_be64(&priv2->spu_chnldata_RW, 0UL);
1098                 out_be64(&priv2->spu_chnlcnt_RW, 0UL);
1099                 eieio();
1100         }
1101 }
1102
1103 static inline void reset_ch_part2(struct spu_state *csa, struct spu *spu)
1104 {
1105         struct spu_priv2 __iomem *priv2 = spu->priv2;
1106         u64 ch_indices[5] = { 21UL, 23UL, 28UL, 29UL, 30UL };
1107         u64 ch_counts[5] = { 16UL, 1UL, 1UL, 0UL, 1UL };
1108         u64 idx;
1109         int i;
1110
1111         /* Restore, Step 21:
1112          *     Reset the following CH: [21, 23, 28, 29, 30]
1113          */
1114         for (i = 0; i < 5; i++) {
1115                 idx = ch_indices[i];
1116                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1117                 eieio();
1118                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1119                 eieio();
1120         }
1121 }
1122
1123 static inline void setup_spu_status_part1(struct spu_state *csa,
1124                                           struct spu *spu)
1125 {
1126         u32 status_P = SPU_STATUS_STOPPED_BY_STOP;
1127         u32 status_I = SPU_STATUS_INVALID_INSTR;
1128         u32 status_H = SPU_STATUS_STOPPED_BY_HALT;
1129         u32 status_S = SPU_STATUS_SINGLE_STEP;
1130         u32 status_S_I = SPU_STATUS_SINGLE_STEP | SPU_STATUS_INVALID_INSTR;
1131         u32 status_S_P = SPU_STATUS_SINGLE_STEP | SPU_STATUS_STOPPED_BY_STOP;
1132         u32 status_P_H = SPU_STATUS_STOPPED_BY_HALT |SPU_STATUS_STOPPED_BY_STOP;
1133         u32 status_P_I = SPU_STATUS_STOPPED_BY_STOP |SPU_STATUS_INVALID_INSTR;
1134         u32 status_code;
1135
1136         /* Restore, Step 27:
1137          *     If the CSA.SPU_Status[I,S,H,P]=1 then add the correct
1138          *     instruction sequence to the end of the SPU based restore
1139          *     code (after the "context restored" stop and signal) to
1140          *     restore the correct SPU status.
1141          *
1142          *     NOTE: Rather than modifying the SPU executable, we
1143          *     instead add a new 'stopped_status' field to the
1144          *     LSCSA.  The SPU-side restore reads this field and
1145          *     takes the appropriate action when exiting.
1146          */
1147
1148         status_code =
1149             (csa->prob.spu_status_R >> SPU_STOP_STATUS_SHIFT) & 0xFFFF;
1150         if ((csa->prob.spu_status_R & status_P_I) == status_P_I) {
1151
1152                 /* SPU_Status[P,I]=1 - Illegal Instruction followed
1153                  * by Stop and Signal instruction, followed by 'br -4'.
1154                  *
1155                  */
1156                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_I;
1157                 csa->lscsa->stopped_status.slot[1] = status_code;
1158
1159         } else if ((csa->prob.spu_status_R & status_P_H) == status_P_H) {
1160
1161                 /* SPU_Status[P,H]=1 - Halt Conditional, followed
1162                  * by Stop and Signal instruction, followed by
1163                  * 'br -4'.
1164                  */
1165                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P_H;
1166                 csa->lscsa->stopped_status.slot[1] = status_code;
1167
1168         } else if ((csa->prob.spu_status_R & status_S_P) == status_S_P) {
1169
1170                 /* SPU_Status[S,P]=1 - Stop and Signal instruction
1171                  * followed by 'br -4'.
1172                  */
1173                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_P;
1174                 csa->lscsa->stopped_status.slot[1] = status_code;
1175
1176         } else if ((csa->prob.spu_status_R & status_S_I) == status_S_I) {
1177
1178                 /* SPU_Status[S,I]=1 - Illegal instruction followed
1179                  * by 'br -4'.
1180                  */
1181                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S_I;
1182                 csa->lscsa->stopped_status.slot[1] = status_code;
1183
1184         } else if ((csa->prob.spu_status_R & status_P) == status_P) {
1185
1186                 /* SPU_Status[P]=1 - Stop and Signal instruction
1187                  * followed by 'br -4'.
1188                  */
1189                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_P;
1190                 csa->lscsa->stopped_status.slot[1] = status_code;
1191
1192         } else if ((csa->prob.spu_status_R & status_H) == status_H) {
1193
1194                 /* SPU_Status[H]=1 - Halt Conditional, followed
1195                  * by 'br -4'.
1196                  */
1197                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_H;
1198
1199         } else if ((csa->prob.spu_status_R & status_S) == status_S) {
1200
1201                 /* SPU_Status[S]=1 - Two nop instructions.
1202                  */
1203                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_S;
1204
1205         } else if ((csa->prob.spu_status_R & status_I) == status_I) {
1206
1207                 /* SPU_Status[I]=1 - Illegal instruction followed
1208                  * by 'br -4'.
1209                  */
1210                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_I;
1211
1212         }
1213 }
1214
1215 static inline void setup_spu_status_part2(struct spu_state *csa,
1216                                           struct spu *spu)
1217 {
1218         u32 mask;
1219
1220         /* Restore, Step 28:
1221          *     If the CSA.SPU_Status[I,S,H,P,R]=0 then
1222          *     add a 'br *' instruction to the end of
1223          *     the SPU based restore code.
1224          *
1225          *     NOTE: Rather than modifying the SPU executable, we
1226          *     instead add a new 'stopped_status' field to the
1227          *     LSCSA.  The SPU-side restore reads this field and
1228          *     takes the appropriate action when exiting.
1229          */
1230         mask = SPU_STATUS_INVALID_INSTR |
1231             SPU_STATUS_SINGLE_STEP |
1232             SPU_STATUS_STOPPED_BY_HALT |
1233             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1234         if (!(csa->prob.spu_status_R & mask)) {
1235                 csa->lscsa->stopped_status.slot[0] = SPU_STOPPED_STATUS_R;
1236         }
1237 }
1238
1239 static inline void restore_mfc_rag(struct spu_state *csa, struct spu *spu)
1240 {
1241         /* Restore, Step 29:
1242          *     Restore RA_GROUP_ID register and the
1243          *     RA_ENABLE reigster from the CSA.
1244          */
1245         spu_resource_allocation_groupID_set(spu,
1246                         csa->priv1.resource_allocation_groupID_RW);
1247         spu_resource_allocation_enable_set(spu,
1248                         csa->priv1.resource_allocation_enable_RW);
1249 }
1250
1251 static inline void send_restore_code(struct spu_state *csa, struct spu *spu)
1252 {
1253         unsigned long addr = (unsigned long)&spu_restore_code[0];
1254         unsigned int ls_offset = 0x0;
1255         unsigned int size = sizeof(spu_restore_code);
1256         unsigned int tag = 0;
1257         unsigned int rclass = 0;
1258         unsigned int cmd = MFC_GETFS_CMD;
1259
1260         /* Restore, Step 37:
1261          *     Issue MFC DMA command to copy context
1262          *     restore code to local storage.
1263          */
1264         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1265 }
1266
1267 static inline void setup_decr(struct spu_state *csa, struct spu *spu)
1268 {
1269         /* Restore, Step 34:
1270          *     If CSA.MFC_CNTL[Ds]=1 (decrementer was
1271          *     running) then adjust decrementer, set
1272          *     decrementer running status in LSCSA,
1273          *     and set decrementer "wrapped" status
1274          *     in LSCSA.
1275          */
1276         if (csa->priv2.mfc_control_RW & MFC_CNTL_DECREMENTER_RUNNING) {
1277                 cycles_t resume_time = get_cycles();
1278                 cycles_t delta_time = resume_time - csa->suspend_time;
1279
1280                 csa->lscsa->decr.slot[0] -= delta_time;
1281         }
1282 }
1283
1284 static inline void setup_ppu_mb(struct spu_state *csa, struct spu *spu)
1285 {
1286         /* Restore, Step 35:
1287          *     Copy the CSA.PU_MB data into the LSCSA.
1288          */
1289         csa->lscsa->ppu_mb.slot[0] = csa->prob.pu_mb_R;
1290 }
1291
1292 static inline void setup_ppuint_mb(struct spu_state *csa, struct spu *spu)
1293 {
1294         /* Restore, Step 36:
1295          *     Copy the CSA.PUINT_MB data into the LSCSA.
1296          */
1297         csa->lscsa->ppuint_mb.slot[0] = csa->priv2.puint_mb_R;
1298 }
1299
1300 static inline int check_restore_status(struct spu_state *csa, struct spu *spu)
1301 {
1302         struct spu_problem __iomem *prob = spu->problem;
1303         u32 complete;
1304
1305         /* Restore, Step 40:
1306          *     If SPU_Status[P]=1 and SPU_Status[SC] = "success",
1307          *     context restore succeeded, otherwise context restore
1308          *     failed.
1309          */
1310         complete = ((SPU_RESTORE_COMPLETE << SPU_STOP_STATUS_SHIFT) |
1311                     SPU_STATUS_STOPPED_BY_STOP);
1312         return (in_be32(&prob->spu_status_R) != complete) ? 1 : 0;
1313 }
1314
1315 static inline void restore_spu_privcntl(struct spu_state *csa, struct spu *spu)
1316 {
1317         struct spu_priv2 __iomem *priv2 = spu->priv2;
1318
1319         /* Restore, Step 41:
1320          *     Restore SPU_PrivCntl from the CSA.
1321          */
1322         out_be64(&priv2->spu_privcntl_RW, csa->priv2.spu_privcntl_RW);
1323         eieio();
1324 }
1325
1326 static inline void restore_status_part1(struct spu_state *csa, struct spu *spu)
1327 {
1328         struct spu_problem __iomem *prob = spu->problem;
1329         u32 mask;
1330
1331         /* Restore, Step 42:
1332          *     If any CSA.SPU_Status[I,S,H,P]=1, then
1333          *     restore the error or single step state.
1334          */
1335         mask = SPU_STATUS_INVALID_INSTR |
1336             SPU_STATUS_SINGLE_STEP |
1337             SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP;
1338         if (csa->prob.spu_status_R & mask) {
1339                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1340                 eieio();
1341                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1342                                 SPU_STATUS_RUNNING);
1343         }
1344 }
1345
1346 static inline void restore_status_part2(struct spu_state *csa, struct spu *spu)
1347 {
1348         struct spu_problem __iomem *prob = spu->problem;
1349         u32 mask;
1350
1351         /* Restore, Step 43:
1352          *     If all CSA.SPU_Status[I,S,H,P,R]=0 then write
1353          *     SPU_RunCntl[R0R1]='01', wait for SPU_Status[R]=1,
1354          *     then write '00' to SPU_RunCntl[R0R1] and wait
1355          *     for SPU_Status[R]=0.
1356          */
1357         mask = SPU_STATUS_INVALID_INSTR |
1358             SPU_STATUS_SINGLE_STEP |
1359             SPU_STATUS_STOPPED_BY_HALT |
1360             SPU_STATUS_STOPPED_BY_STOP | SPU_STATUS_RUNNING;
1361         if (!(csa->prob.spu_status_R & mask)) {
1362                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1363                 eieio();
1364                 POLL_WHILE_FALSE(in_be32(&prob->spu_status_R) &
1365                                  SPU_STATUS_RUNNING);
1366                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1367                 eieio();
1368                 POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) &
1369                                 SPU_STATUS_RUNNING);
1370         }
1371 }
1372
1373 static inline void restore_ls_16kb(struct spu_state *csa, struct spu *spu)
1374 {
1375         unsigned long addr = (unsigned long)&csa->lscsa->ls[0];
1376         unsigned int ls_offset = 0x0;
1377         unsigned int size = 16384;
1378         unsigned int tag = 0;
1379         unsigned int rclass = 0;
1380         unsigned int cmd = MFC_GET_CMD;
1381
1382         /* Restore, Step 44:
1383          *     Issue a DMA command to restore the first
1384          *     16kb of local storage from CSA.
1385          */
1386         send_mfc_dma(spu, addr, ls_offset, size, tag, rclass, cmd);
1387 }
1388
1389 static inline void clear_interrupts(struct spu_state *csa, struct spu *spu)
1390 {
1391         /* Restore, Step 49:
1392          *     Write INT_MASK_class0 with value of 0.
1393          *     Write INT_MASK_class1 with value of 0.
1394          *     Write INT_MASK_class2 with value of 0.
1395          *     Write INT_STAT_class0 with value of -1.
1396          *     Write INT_STAT_class1 with value of -1.
1397          *     Write INT_STAT_class2 with value of -1.
1398          */
1399         spin_lock_irq(&spu->register_lock);
1400         spu_int_mask_set(spu, 0, 0ul);
1401         spu_int_mask_set(spu, 1, 0ul);
1402         spu_int_mask_set(spu, 2, 0ul);
1403         spu_int_stat_clear(spu, 0, ~0ul);
1404         spu_int_stat_clear(spu, 1, ~0ul);
1405         spu_int_stat_clear(spu, 2, ~0ul);
1406         spin_unlock_irq(&spu->register_lock);
1407 }
1408
1409 static inline void restore_mfc_queues(struct spu_state *csa, struct spu *spu)
1410 {
1411         struct spu_priv2 __iomem *priv2 = spu->priv2;
1412         int i;
1413
1414         /* Restore, Step 50:
1415          *     If MFC_Cntl[Se]!=0 then restore
1416          *     MFC command queues.
1417          */
1418         if ((csa->priv2.mfc_control_RW & MFC_CNTL_DMA_QUEUES_EMPTY_MASK) == 0) {
1419                 for (i = 0; i < 8; i++) {
1420                         out_be64(&priv2->puq[i].mfc_cq_data0_RW,
1421                                  csa->priv2.puq[i].mfc_cq_data0_RW);
1422                         out_be64(&priv2->puq[i].mfc_cq_data1_RW,
1423                                  csa->priv2.puq[i].mfc_cq_data1_RW);
1424                         out_be64(&priv2->puq[i].mfc_cq_data2_RW,
1425                                  csa->priv2.puq[i].mfc_cq_data2_RW);
1426                         out_be64(&priv2->puq[i].mfc_cq_data3_RW,
1427                                  csa->priv2.puq[i].mfc_cq_data3_RW);
1428                 }
1429                 for (i = 0; i < 16; i++) {
1430                         out_be64(&priv2->spuq[i].mfc_cq_data0_RW,
1431                                  csa->priv2.spuq[i].mfc_cq_data0_RW);
1432                         out_be64(&priv2->spuq[i].mfc_cq_data1_RW,
1433                                  csa->priv2.spuq[i].mfc_cq_data1_RW);
1434                         out_be64(&priv2->spuq[i].mfc_cq_data2_RW,
1435                                  csa->priv2.spuq[i].mfc_cq_data2_RW);
1436                         out_be64(&priv2->spuq[i].mfc_cq_data3_RW,
1437                                  csa->priv2.spuq[i].mfc_cq_data3_RW);
1438                 }
1439         }
1440         eieio();
1441 }
1442
1443 static inline void restore_ppu_querymask(struct spu_state *csa, struct spu *spu)
1444 {
1445         struct spu_problem __iomem *prob = spu->problem;
1446
1447         /* Restore, Step 51:
1448          *     Restore the PPU_QueryMask register from CSA.
1449          */
1450         out_be32(&prob->dma_querymask_RW, csa->prob.dma_querymask_RW);
1451         eieio();
1452 }
1453
1454 static inline void restore_ppu_querytype(struct spu_state *csa, struct spu *spu)
1455 {
1456         struct spu_problem __iomem *prob = spu->problem;
1457
1458         /* Restore, Step 52:
1459          *     Restore the PPU_QueryType register from CSA.
1460          */
1461         out_be32(&prob->dma_querytype_RW, csa->prob.dma_querytype_RW);
1462         eieio();
1463 }
1464
1465 static inline void restore_mfc_csr_tsq(struct spu_state *csa, struct spu *spu)
1466 {
1467         struct spu_priv2 __iomem *priv2 = spu->priv2;
1468
1469         /* Restore, Step 53:
1470          *     Restore the MFC_CSR_TSQ register from CSA.
1471          */
1472         out_be64(&priv2->spu_tag_status_query_RW,
1473                  csa->priv2.spu_tag_status_query_RW);
1474         eieio();
1475 }
1476
1477 static inline void restore_mfc_csr_cmd(struct spu_state *csa, struct spu *spu)
1478 {
1479         struct spu_priv2 __iomem *priv2 = spu->priv2;
1480
1481         /* Restore, Step 54:
1482          *     Restore the MFC_CSR_CMD1 and MFC_CSR_CMD2
1483          *     registers from CSA.
1484          */
1485         out_be64(&priv2->spu_cmd_buf1_RW, csa->priv2.spu_cmd_buf1_RW);
1486         out_be64(&priv2->spu_cmd_buf2_RW, csa->priv2.spu_cmd_buf2_RW);
1487         eieio();
1488 }
1489
1490 static inline void restore_mfc_csr_ato(struct spu_state *csa, struct spu *spu)
1491 {
1492         struct spu_priv2 __iomem *priv2 = spu->priv2;
1493
1494         /* Restore, Step 55:
1495          *     Restore the MFC_CSR_ATO register from CSA.
1496          */
1497         out_be64(&priv2->spu_atomic_status_RW, csa->priv2.spu_atomic_status_RW);
1498 }
1499
1500 static inline void restore_mfc_tclass_id(struct spu_state *csa, struct spu *spu)
1501 {
1502         /* Restore, Step 56:
1503          *     Restore the MFC_TCLASS_ID register from CSA.
1504          */
1505         spu_mfc_tclass_id_set(spu, csa->priv1.mfc_tclass_id_RW);
1506         eieio();
1507 }
1508
1509 static inline void set_llr_event(struct spu_state *csa, struct spu *spu)
1510 {
1511         u64 ch0_cnt, ch0_data;
1512         u64 ch1_data;
1513
1514         /* Restore, Step 57:
1515          *    Set the Lock Line Reservation Lost Event by:
1516          *      1. OR CSA.SPU_Event_Status with bit 21 (Lr) set to 1.
1517          *      2. If CSA.SPU_Channel_0_Count=0 and
1518          *         CSA.SPU_Wr_Event_Mask[Lr]=1 and
1519          *         CSA.SPU_Event_Status[Lr]=0 then set
1520          *         CSA.SPU_Event_Status_Count=1.
1521          */
1522         ch0_cnt = csa->spu_chnlcnt_RW[0];
1523         ch0_data = csa->spu_chnldata_RW[0];
1524         ch1_data = csa->spu_chnldata_RW[1];
1525         csa->spu_chnldata_RW[0] |= MFC_LLR_LOST_EVENT;
1526         if ((ch0_cnt == 0) && !(ch0_data & MFC_LLR_LOST_EVENT) &&
1527             (ch1_data & MFC_LLR_LOST_EVENT)) {
1528                 csa->spu_chnlcnt_RW[0] = 1;
1529         }
1530 }
1531
1532 static inline void restore_decr_wrapped(struct spu_state *csa, struct spu *spu)
1533 {
1534         /* Restore, Step 58:
1535          *     If the status of the CSA software decrementer
1536          *     "wrapped" flag is set, OR in a '1' to
1537          *     CSA.SPU_Event_Status[Tm].
1538          */
1539         if (csa->lscsa->decr_status.slot[0] == 1) {
1540                 csa->spu_chnldata_RW[0] |= 0x20;
1541         }
1542         if ((csa->lscsa->decr_status.slot[0] == 1) &&
1543             (csa->spu_chnlcnt_RW[0] == 0 &&
1544              ((csa->spu_chnldata_RW[2] & 0x20) == 0x0) &&
1545              ((csa->spu_chnldata_RW[0] & 0x20) != 0x1))) {
1546                 csa->spu_chnlcnt_RW[0] = 1;
1547         }
1548 }
1549
1550 static inline void restore_ch_part1(struct spu_state *csa, struct spu *spu)
1551 {
1552         struct spu_priv2 __iomem *priv2 = spu->priv2;
1553         u64 idx, ch_indices[7] = { 0UL, 3UL, 4UL, 24UL, 25UL, 27UL };
1554         int i;
1555
1556         /* Restore, Step 59:
1557          */
1558
1559         /* Restore CH 1 without count */
1560         out_be64(&priv2->spu_chnlcntptr_RW, 1);
1561         out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[1]);
1562
1563         /* Restore the following CH: [0,3,4,24,25,27] */
1564         for (i = 0; i < 7; i++) {
1565                 idx = ch_indices[i];
1566                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1567                 eieio();
1568                 out_be64(&priv2->spu_chnldata_RW, csa->spu_chnldata_RW[idx]);
1569                 out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[idx]);
1570                 eieio();
1571         }
1572 }
1573
1574 static inline void restore_ch_part2(struct spu_state *csa, struct spu *spu)
1575 {
1576         struct spu_priv2 __iomem *priv2 = spu->priv2;
1577         u64 ch_indices[3] = { 9UL, 21UL, 23UL };
1578         u64 ch_counts[3] = { 1UL, 16UL, 1UL };
1579         u64 idx;
1580         int i;
1581
1582         /* Restore, Step 60:
1583          *     Restore the following CH: [9,21,23].
1584          */
1585         ch_counts[0] = 1UL;
1586         ch_counts[1] = csa->spu_chnlcnt_RW[21];
1587         ch_counts[2] = 1UL;
1588         for (i = 0; i < 3; i++) {
1589                 idx = ch_indices[i];
1590                 out_be64(&priv2->spu_chnlcntptr_RW, idx);
1591                 eieio();
1592                 out_be64(&priv2->spu_chnlcnt_RW, ch_counts[i]);
1593                 eieio();
1594         }
1595 }
1596
1597 static inline void restore_spu_lslr(struct spu_state *csa, struct spu *spu)
1598 {
1599         struct spu_priv2 __iomem *priv2 = spu->priv2;
1600
1601         /* Restore, Step 61:
1602          *     Restore the SPU_LSLR register from CSA.
1603          */
1604         out_be64(&priv2->spu_lslr_RW, csa->priv2.spu_lslr_RW);
1605         eieio();
1606 }
1607
1608 static inline void restore_spu_cfg(struct spu_state *csa, struct spu *spu)
1609 {
1610         struct spu_priv2 __iomem *priv2 = spu->priv2;
1611
1612         /* Restore, Step 62:
1613          *     Restore the SPU_Cfg register from CSA.
1614          */
1615         out_be64(&priv2->spu_cfg_RW, csa->priv2.spu_cfg_RW);
1616         eieio();
1617 }
1618
1619 static inline void restore_pm_trace(struct spu_state *csa, struct spu *spu)
1620 {
1621         /* Restore, Step 63:
1622          *     Restore PM_Trace_Tag_Wait_Mask from CSA.
1623          *     Not performed by this implementation.
1624          */
1625 }
1626
1627 static inline void restore_spu_npc(struct spu_state *csa, struct spu *spu)
1628 {
1629         struct spu_problem __iomem *prob = spu->problem;
1630
1631         /* Restore, Step 64:
1632          *     Restore SPU_NPC from CSA.
1633          */
1634         out_be32(&prob->spu_npc_RW, csa->prob.spu_npc_RW);
1635         eieio();
1636 }
1637
1638 static inline void restore_spu_mb(struct spu_state *csa, struct spu *spu)
1639 {
1640         struct spu_priv2 __iomem *priv2 = spu->priv2;
1641         int i;
1642
1643         /* Restore, Step 65:
1644          *     Restore MFC_RdSPU_MB from CSA.
1645          */
1646         out_be64(&priv2->spu_chnlcntptr_RW, 29UL);
1647         eieio();
1648         out_be64(&priv2->spu_chnlcnt_RW, csa->spu_chnlcnt_RW[29]);
1649         for (i = 0; i < 4; i++) {
1650                 out_be64(&priv2->spu_chnldata_RW, csa->spu_mailbox_data[i]);
1651         }
1652         eieio();
1653 }
1654
1655 static inline void check_ppu_mb_stat(struct spu_state *csa, struct spu *spu)
1656 {
1657         struct spu_problem __iomem *prob = spu->problem;
1658         u32 dummy = 0;
1659
1660         /* Restore, Step 66:
1661          *     If CSA.MB_Stat[P]=0 (mailbox empty) then
1662          *     read from the PPU_MB register.
1663          */
1664         if ((csa->prob.mb_stat_R & 0xFF) == 0) {
1665                 dummy = in_be32(&prob->pu_mb_R);
1666                 eieio();
1667         }
1668 }
1669
1670 static inline void check_ppuint_mb_stat(struct spu_state *csa, struct spu *spu)
1671 {
1672         struct spu_priv2 __iomem *priv2 = spu->priv2;
1673         u64 dummy = 0UL;
1674
1675         /* Restore, Step 66:
1676          *     If CSA.MB_Stat[I]=0 (mailbox empty) then
1677          *     read from the PPUINT_MB register.
1678          */
1679         if ((csa->prob.mb_stat_R & 0xFF0000) == 0) {
1680                 dummy = in_be64(&priv2->puint_mb_R);
1681                 eieio();
1682                 spu_int_stat_clear(spu, 2, CLASS2_ENABLE_MAILBOX_INTR);
1683                 eieio();
1684         }
1685 }
1686
1687 static inline void restore_mfc_sr1(struct spu_state *csa, struct spu *spu)
1688 {
1689         /* Restore, Step 69:
1690          *     Restore the MFC_SR1 register from CSA.
1691          */
1692         spu_mfc_sr1_set(spu, csa->priv1.mfc_sr1_RW);
1693         eieio();
1694 }
1695
1696 static inline void restore_other_spu_access(struct spu_state *csa,
1697                                             struct spu *spu)
1698 {
1699         /* Restore, Step 70:
1700          *     Restore other SPU mappings to this SPU. TBD.
1701          */
1702 }
1703
1704 static inline void restore_spu_runcntl(struct spu_state *csa, struct spu *spu)
1705 {
1706         struct spu_problem __iomem *prob = spu->problem;
1707
1708         /* Restore, Step 71:
1709          *     If CSA.SPU_Status[R]=1 then write
1710          *     SPU_RunCntl[R0R1]='01'.
1711          */
1712         if (csa->prob.spu_status_R & SPU_STATUS_RUNNING) {
1713                 out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_RUNNABLE);
1714                 eieio();
1715         }
1716 }
1717
1718 static inline void restore_mfc_cntl(struct spu_state *csa, struct spu *spu)
1719 {
1720         struct spu_priv2 __iomem *priv2 = spu->priv2;
1721
1722         /* Restore, Step 72:
1723          *    Restore the MFC_CNTL register for the CSA.
1724          */
1725         out_be64(&priv2->mfc_control_RW, csa->priv2.mfc_control_RW);
1726         eieio();
1727         /*
1728          * FIXME: this is to restart a DMA that we were processing
1729          *        before the save. better remember the fault information
1730          *        in the csa instead.
1731          */
1732         if ((csa->priv2.mfc_control_RW & MFC_CNTL_SUSPEND_DMA_QUEUE_MASK)) {
1733                 out_be64(&priv2->mfc_control_RW, MFC_CNTL_RESTART_DMA_COMMAND);
1734                 eieio();
1735         }
1736 }
1737
1738 static inline void enable_user_access(struct spu_state *csa, struct spu *spu)
1739 {
1740         /* Restore, Step 73:
1741          *     Enable user-space access (if provided) to this
1742          *     SPU by mapping the virtual pages assigned to
1743          *     the SPU memory-mapped I/O (MMIO) for problem
1744          *     state. TBD.
1745          */
1746 }
1747
1748 static inline void reset_switch_active(struct spu_state *csa, struct spu *spu)
1749 {
1750         /* Restore, Step 74:
1751          *     Reset the "context switch active" flag.
1752          */
1753         clear_bit(SPU_CONTEXT_SWITCH_ACTIVE, &spu->flags);
1754         mb();
1755 }
1756
1757 static inline void reenable_interrupts(struct spu_state *csa, struct spu *spu)
1758 {
1759         /* Restore, Step 75:
1760          *     Re-enable SPU interrupts.
1761          */
1762         spin_lock_irq(&spu->register_lock);
1763         spu_int_mask_set(spu, 0, csa->priv1.int_mask_class0_RW);
1764         spu_int_mask_set(spu, 1, csa->priv1.int_mask_class1_RW);
1765         spu_int_mask_set(spu, 2, csa->priv1.int_mask_class2_RW);
1766         spin_unlock_irq(&spu->register_lock);
1767 }
1768
1769 static int quiece_spu(struct spu_state *prev, struct spu *spu)
1770 {
1771         /*
1772          * Combined steps 2-18 of SPU context save sequence, which
1773          * quiesce the SPU state (disable SPU execution, MFC command
1774          * queues, decrementer, SPU interrupts, etc.).
1775          *
1776          * Returns      0 on success.
1777          *              2 if failed step 2.
1778          *              6 if failed step 6.
1779          */
1780
1781         if (check_spu_isolate(prev, spu)) {     /* Step 2. */
1782                 return 2;
1783         }
1784         disable_interrupts(prev, spu);          /* Step 3. */
1785         set_watchdog_timer(prev, spu);          /* Step 4. */
1786         inhibit_user_access(prev, spu);         /* Step 5. */
1787         if (check_spu_isolate(prev, spu)) {     /* Step 6. */
1788                 return 6;
1789         }
1790         set_switch_pending(prev, spu);          /* Step 7. */
1791         save_mfc_cntl(prev, spu);               /* Step 8. */
1792         save_spu_runcntl(prev, spu);            /* Step 9. */
1793         save_mfc_sr1(prev, spu);                /* Step 10. */
1794         save_spu_status(prev, spu);             /* Step 11. */
1795         save_mfc_decr(prev, spu);               /* Step 12. */
1796         halt_mfc_decr(prev, spu);               /* Step 13. */
1797         save_timebase(prev, spu);               /* Step 14. */
1798         remove_other_spu_access(prev, spu);     /* Step 15. */
1799         do_mfc_mssync(prev, spu);               /* Step 16. */
1800         issue_mfc_tlbie(prev, spu);             /* Step 17. */
1801         handle_pending_interrupts(prev, spu);   /* Step 18. */
1802
1803         return 0;
1804 }
1805
1806 static void save_csa(struct spu_state *prev, struct spu *spu)
1807 {
1808         /*
1809          * Combine steps 19-44 of SPU context save sequence, which
1810          * save regions of the privileged & problem state areas.
1811          */
1812
1813         save_mfc_queues(prev, spu);     /* Step 19. */
1814         save_ppu_querymask(prev, spu);  /* Step 20. */
1815         save_ppu_querytype(prev, spu);  /* Step 21. */
1816         save_mfc_csr_tsq(prev, spu);    /* Step 22. */
1817         save_mfc_csr_cmd(prev, spu);    /* Step 23. */
1818         save_mfc_csr_ato(prev, spu);    /* Step 24. */
1819         save_mfc_tclass_id(prev, spu);  /* Step 25. */
1820         set_mfc_tclass_id(prev, spu);   /* Step 26. */
1821         purge_mfc_queue(prev, spu);     /* Step 27. */
1822         wait_purge_complete(prev, spu); /* Step 28. */
1823         setup_mfc_sr1(prev, spu);       /* Step 30. */
1824         save_spu_npc(prev, spu);        /* Step 31. */
1825         save_spu_privcntl(prev, spu);   /* Step 32. */
1826         reset_spu_privcntl(prev, spu);  /* Step 33. */
1827         save_spu_lslr(prev, spu);       /* Step 34. */
1828         reset_spu_lslr(prev, spu);      /* Step 35. */
1829         save_spu_cfg(prev, spu);        /* Step 36. */
1830         save_pm_trace(prev, spu);       /* Step 37. */
1831         save_mfc_rag(prev, spu);        /* Step 38. */
1832         save_ppu_mb_stat(prev, spu);    /* Step 39. */
1833         save_ppu_mb(prev, spu);         /* Step 40. */
1834         save_ppuint_mb(prev, spu);      /* Step 41. */
1835         save_ch_part1(prev, spu);       /* Step 42. */
1836         save_spu_mb(prev, spu);         /* Step 43. */
1837         save_mfc_cmd(prev, spu);        /* Step 44. */
1838         reset_ch(prev, spu);            /* Step 45. */
1839 }
1840
1841 static void save_lscsa(struct spu_state *prev, struct spu *spu)
1842 {
1843         /*
1844          * Perform steps 46-57 of SPU context save sequence,
1845          * which save regions of the local store and register
1846          * file.
1847          */
1848
1849         resume_mfc_queue(prev, spu);    /* Step 46. */
1850         setup_mfc_slbs(prev, spu);      /* Step 47. */
1851         set_switch_active(prev, spu);   /* Step 48. */
1852         enable_interrupts(prev, spu);   /* Step 49. */
1853         save_ls_16kb(prev, spu);        /* Step 50. */
1854         set_spu_npc(prev, spu);         /* Step 51. */
1855         set_signot1(prev, spu);         /* Step 52. */
1856         set_signot2(prev, spu);         /* Step 53. */
1857         send_save_code(prev, spu);      /* Step 54. */
1858         set_ppu_querymask(prev, spu);   /* Step 55. */
1859         wait_tag_complete(prev, spu);   /* Step 56. */
1860         wait_spu_stopped(prev, spu);    /* Step 57. */
1861 }
1862
1863 static void force_spu_isolate_exit(struct spu *spu)
1864 {
1865         struct spu_problem __iomem *prob = spu->problem;
1866         struct spu_priv2 __iomem *priv2 = spu->priv2;
1867
1868         /* Stop SPE execution and wait for completion. */
1869         out_be32(&prob->spu_runcntl_RW, SPU_RUNCNTL_STOP);
1870         iobarrier_rw();
1871         POLL_WHILE_TRUE(in_be32(&prob->spu_status_R) & SPU_STATUS_RUNNING);
1872
1873         /* Restart SPE master runcntl. */
1874         spu_mfc_sr1_set(spu, MFC_STATE1_MASTER_RUN_CONTROL_MASK);
1875         iobarrier_w();
1876
1877         /* Initiate isolate exit request and wait for completion. */
1878         out_be64(&priv2->spu_privcntl_RW, 4LL);
1879         iobarrier_w();
1880         out_be32(&prob->spu_runcntl_RW, 2);
1881         iobarrier_rw();
1882         POLL_WHILE_FALSE((in_be32(&prob->spu_status_R)
1883                                 & SPU_STATUS_STOPPED_BY_STOP));
1884
1885         /* Reset load request to normal. */
1886         out_be64(&priv2->spu_privcntl_RW, SPU_PRIVCNT_LOAD_REQUEST_NORMAL);
1887         iobarrier_w();
1888 }
1889
1890 /**
1891  * stop_spu_isolate
1892  *      Check SPU run-control state and force isolated
1893  *      exit function as necessary.
1894  */
1895 static void stop_spu_isolate(struct spu *spu)
1896 {
1897         struct spu_problem __iomem *prob = spu->problem;
1898
1899         if (in_be32(&prob->spu_status_R) & SPU_STATUS_ISOLATED_STATE) {
1900                 /* The SPU is in isolated state; the only way
1901                  * to get it out is to perform an isolated
1902                  * exit (clean) operation.
1903                  */
1904                 force_spu_isolate_exit(spu);
1905         }
1906 }
1907
1908 static void harvest(struct spu_state *prev, struct spu *spu)
1909 {
1910         /*
1911          * Perform steps 2-25 of SPU context restore sequence,
1912          * which resets an SPU either after a failed save, or
1913          * when using SPU for first time.
1914          */
1915
1916         disable_interrupts(prev, spu);          /* Step 2.  */
1917         inhibit_user_access(prev, spu);         /* Step 3.  */
1918         terminate_spu_app(prev, spu);           /* Step 4.  */
1919         set_switch_pending(prev, spu);          /* Step 5.  */
1920         stop_spu_isolate(spu);                  /* NEW.     */
1921         remove_other_spu_access(prev, spu);     /* Step 6.  */
1922         suspend_mfc(prev, spu);                 /* Step 7.  */
1923         wait_suspend_mfc_complete(prev, spu);   /* Step 8.  */
1924         if (!suspend_spe(prev, spu))            /* Step 9.  */
1925                 clear_spu_status(prev, spu);    /* Step 10. */
1926         do_mfc_mssync(prev, spu);               /* Step 11. */
1927         issue_mfc_tlbie(prev, spu);             /* Step 12. */
1928         handle_pending_interrupts(prev, spu);   /* Step 13. */
1929         purge_mfc_queue(prev, spu);             /* Step 14. */
1930         wait_purge_complete(prev, spu);         /* Step 15. */
1931         reset_spu_privcntl(prev, spu);          /* Step 16. */
1932         reset_spu_lslr(prev, spu);              /* Step 17. */
1933         setup_mfc_sr1(prev, spu);               /* Step 18. */
1934         spu_invalidate_slbs(spu);               /* Step 19. */
1935         reset_ch_part1(prev, spu);              /* Step 20. */
1936         reset_ch_part2(prev, spu);              /* Step 21. */
1937         enable_interrupts(prev, spu);           /* Step 22. */
1938         set_switch_active(prev, spu);           /* Step 23. */
1939         set_mfc_tclass_id(prev, spu);           /* Step 24. */
1940         resume_mfc_queue(prev, spu);            /* Step 25. */
1941 }
1942
1943 static void restore_lscsa(struct spu_state *next, struct spu *spu)
1944 {
1945         /*
1946          * Perform steps 26-40 of SPU context restore sequence,
1947          * which restores regions of the local store and register
1948          * file.
1949          */
1950
1951         set_watchdog_timer(next, spu);          /* Step 26. */
1952         setup_spu_status_part1(next, spu);      /* Step 27. */
1953         setup_spu_status_part2(next, spu);      /* Step 28. */
1954         restore_mfc_rag(next, spu);             /* Step 29. */
1955         setup_mfc_slbs(next, spu);              /* Step 30. */
1956         set_spu_npc(next, spu);                 /* Step 31. */
1957         set_signot1(next, spu);                 /* Step 32. */
1958         set_signot2(next, spu);                 /* Step 33. */
1959         setup_decr(next, spu);                  /* Step 34. */
1960         setup_ppu_mb(next, spu);                /* Step 35. */
1961         setup_ppuint_mb(next, spu);             /* Step 36. */
1962         send_restore_code(next, spu);           /* Step 37. */
1963         set_ppu_querymask(next, spu);           /* Step 38. */
1964         wait_tag_complete(next, spu);           /* Step 39. */
1965         wait_spu_stopped(next, spu);            /* Step 40. */
1966 }
1967
1968 static void restore_csa(struct spu_state *next, struct spu *spu)
1969 {
1970         /*
1971          * Combine steps 41-76 of SPU context restore sequence, which
1972          * restore regions of the privileged & problem state areas.
1973          */
1974
1975         restore_spu_privcntl(next, spu);        /* Step 41. */
1976         restore_status_part1(next, spu);        /* Step 42. */
1977         restore_status_part2(next, spu);        /* Step 43. */
1978         restore_ls_16kb(next, spu);             /* Step 44. */
1979         wait_tag_complete(next, spu);           /* Step 45. */
1980         suspend_mfc(next, spu);                 /* Step 46. */
1981         wait_suspend_mfc_complete(next, spu);   /* Step 47. */
1982         issue_mfc_tlbie(next, spu);             /* Step 48. */
1983         clear_interrupts(next, spu);            /* Step 49. */
1984         restore_mfc_queues(next, spu);          /* Step 50. */
1985         restore_ppu_querymask(next, spu);       /* Step 51. */
1986         restore_ppu_querytype(next, spu);       /* Step 52. */
1987         restore_mfc_csr_tsq(next, spu);         /* Step 53. */
1988         restore_mfc_csr_cmd(next, spu);         /* Step 54. */
1989         restore_mfc_csr_ato(next, spu);         /* Step 55. */
1990         restore_mfc_tclass_id(next, spu);       /* Step 56. */
1991         set_llr_event(next, spu);               /* Step 57. */
1992         restore_decr_wrapped(next, spu);        /* Step 58. */
1993         restore_ch_part1(next, spu);            /* Step 59. */
1994         restore_ch_part2(next, spu);            /* Step 60. */
1995         restore_spu_lslr(next, spu);            /* Step 61. */
1996         restore_spu_cfg(next, spu);             /* Step 62. */
1997         restore_pm_trace(next, spu);            /* Step 63. */
1998         restore_spu_npc(next, spu);             /* Step 64. */
1999         restore_spu_mb(next, spu);              /* Step 65. */
2000         check_ppu_mb_stat(next, spu);           /* Step 66. */
2001         check_ppuint_mb_stat(next, spu);        /* Step 67. */
2002         spu_invalidate_slbs(spu);               /* Modified Step 68. */
2003         restore_mfc_sr1(next, spu);             /* Step 69. */
2004         restore_other_spu_access(next, spu);    /* Step 70. */
2005         restore_spu_runcntl(next, spu);         /* Step 71. */
2006         restore_mfc_cntl(next, spu);            /* Step 72. */
2007         enable_user_access(next, spu);          /* Step 73. */
2008         reset_switch_active(next, spu);         /* Step 74. */
2009         reenable_interrupts(next, spu);         /* Step 75. */
2010 }
2011
2012 static int __do_spu_save(struct spu_state *prev, struct spu *spu)
2013 {
2014         int rc;
2015
2016         /*
2017          * SPU context save can be broken into three phases:
2018          *
2019          *     (a) quiesce [steps 2-16].
2020          *     (b) save of CSA, performed by PPE [steps 17-42]
2021          *     (c) save of LSCSA, mostly performed by SPU [steps 43-52].
2022          *
2023          * Returns      0 on success.
2024          *              2,6 if failed to quiece SPU
2025          *              53 if SPU-side of save failed.
2026          */
2027
2028         rc = quiece_spu(prev, spu);             /* Steps 2-16. */
2029         switch (rc) {
2030         default:
2031         case 2:
2032         case 6:
2033                 harvest(prev, spu);
2034                 return rc;
2035                 break;
2036         case 0:
2037                 break;
2038         }
2039         save_csa(prev, spu);                    /* Steps 17-43. */
2040         save_lscsa(prev, spu);                  /* Steps 44-53. */
2041         return check_save_status(prev, spu);    /* Step 54.     */
2042 }
2043
2044 static int __do_spu_restore(struct spu_state *next, struct spu *spu)
2045 {
2046         int rc;
2047
2048         /*
2049          * SPU context restore can be broken into three phases:
2050          *
2051          *    (a) harvest (or reset) SPU [steps 2-24].
2052          *    (b) restore LSCSA [steps 25-40], mostly performed by SPU.
2053          *    (c) restore CSA [steps 41-76], performed by PPE.
2054          *
2055          * The 'harvest' step is not performed here, but rather
2056          * as needed below.
2057          */
2058
2059         restore_lscsa(next, spu);               /* Steps 24-39. */
2060         rc = check_restore_status(next, spu);   /* Step 40.     */
2061         switch (rc) {
2062         default:
2063                 /* Failed. Return now. */
2064                 return rc;
2065                 break;
2066         case 0:
2067                 /* Fall through to next step. */
2068                 break;
2069         }
2070         restore_csa(next, spu);
2071
2072         return 0;
2073 }
2074
2075 /**
2076  * spu_save - SPU context save, with locking.
2077  * @prev: pointer to SPU context save area, to be saved.
2078  * @spu: pointer to SPU iomem structure.
2079  *
2080  * Acquire locks, perform the save operation then return.
2081  */
2082 int spu_save(struct spu_state *prev, struct spu *spu)
2083 {
2084         int rc;
2085
2086         acquire_spu_lock(spu);          /* Step 1.     */
2087         rc = __do_spu_save(prev, spu);  /* Steps 2-53. */
2088         release_spu_lock(spu);
2089         if (rc != 0 && rc != 2 && rc != 6) {
2090                 panic("%s failed on SPU[%d], rc=%d.\n",
2091                       __func__, spu->number, rc);
2092         }
2093         return 0;
2094 }
2095 EXPORT_SYMBOL_GPL(spu_save);
2096
2097 /**
2098  * spu_restore - SPU context restore, with harvest and locking.
2099  * @new: pointer to SPU context save area, to be restored.
2100  * @spu: pointer to SPU iomem structure.
2101  *
2102  * Perform harvest + restore, as we may not be coming
2103  * from a previous successful save operation, and the
2104  * hardware state is unknown.
2105  */
2106 int spu_restore(struct spu_state *new, struct spu *spu)
2107 {
2108         int rc;
2109
2110         acquire_spu_lock(spu);
2111         harvest(NULL, spu);
2112         spu->dar = 0;
2113         spu->dsisr = 0;
2114         spu->slb_replace = 0;
2115         spu->class_0_pending = 0;
2116         rc = __do_spu_restore(new, spu);
2117         release_spu_lock(spu);
2118         if (rc) {
2119                 panic("%s failed on SPU[%d] rc=%d.\n",
2120                        __func__, spu->number, rc);
2121         }
2122         return rc;
2123 }
2124 EXPORT_SYMBOL_GPL(spu_restore);
2125
2126 /**
2127  * spu_harvest - SPU harvest (reset) operation
2128  * @spu: pointer to SPU iomem structure.
2129  *
2130  * Perform SPU harvest (reset) operation.
2131  */
2132 void spu_harvest(struct spu *spu)
2133 {
2134         acquire_spu_lock(spu);
2135         harvest(NULL, spu);
2136         release_spu_lock(spu);
2137 }
2138
2139 static void init_prob(struct spu_state *csa)
2140 {
2141         csa->spu_chnlcnt_RW[9] = 1;
2142         csa->spu_chnlcnt_RW[21] = 16;
2143         csa->spu_chnlcnt_RW[23] = 1;
2144         csa->spu_chnlcnt_RW[28] = 1;
2145         csa->spu_chnlcnt_RW[30] = 1;
2146         csa->prob.spu_runcntl_RW = SPU_RUNCNTL_STOP;
2147         csa->prob.mb_stat_R = 0x000400;
2148 }
2149
2150 static void init_priv1(struct spu_state *csa)
2151 {
2152         /* Enable decode, relocate, tlbie response, master runcntl. */
2153         csa->priv1.mfc_sr1_RW = MFC_STATE1_LOCAL_STORAGE_DECODE_MASK |
2154             MFC_STATE1_MASTER_RUN_CONTROL_MASK |
2155             MFC_STATE1_PROBLEM_STATE_MASK |
2156             MFC_STATE1_RELOCATE_MASK | MFC_STATE1_BUS_TLBIE_MASK;
2157
2158         /* Enable OS-specific set of interrupts. */
2159         csa->priv1.int_mask_class0_RW = CLASS0_ENABLE_DMA_ALIGNMENT_INTR |
2160             CLASS0_ENABLE_INVALID_DMA_COMMAND_INTR |
2161             CLASS0_ENABLE_SPU_ERROR_INTR;
2162         csa->priv1.int_mask_class1_RW = CLASS1_ENABLE_SEGMENT_FAULT_INTR |
2163             CLASS1_ENABLE_STORAGE_FAULT_INTR;
2164         csa->priv1.int_mask_class2_RW = CLASS2_ENABLE_SPU_STOP_INTR |
2165             CLASS2_ENABLE_SPU_HALT_INTR |
2166             CLASS2_ENABLE_SPU_DMA_TAG_GROUP_COMPLETE_INTR;
2167 }
2168
2169 static void init_priv2(struct spu_state *csa)
2170 {
2171         csa->priv2.spu_lslr_RW = LS_ADDR_MASK;
2172         csa->priv2.mfc_control_RW = MFC_CNTL_RESUME_DMA_QUEUE |
2173             MFC_CNTL_NORMAL_DMA_QUEUE_OPERATION |
2174             MFC_CNTL_DMA_QUEUES_EMPTY_MASK;
2175 }
2176
2177 /**
2178  * spu_alloc_csa - allocate and initialize an SPU context save area.
2179  *
2180  * Allocate and initialize the contents of an SPU context save area.
2181  * This includes enabling address translation, interrupt masks, etc.,
2182  * as appropriate for the given OS environment.
2183  *
2184  * Note that storage for the 'lscsa' is allocated separately,
2185  * as it is by far the largest of the context save regions,
2186  * and may need to be pinned or otherwise specially aligned.
2187  */
2188 void spu_init_csa(struct spu_state *csa)
2189 {
2190         struct spu_lscsa *lscsa;
2191         unsigned char *p;
2192
2193         if (!csa)
2194                 return;
2195         memset(csa, 0, sizeof(struct spu_state));
2196
2197         lscsa = vmalloc(sizeof(struct spu_lscsa));
2198         if (!lscsa)
2199                 return;
2200
2201         memset(lscsa, 0, sizeof(struct spu_lscsa));
2202         csa->lscsa = lscsa;
2203         spin_lock_init(&csa->register_lock);
2204
2205         /* Set LS pages reserved to allow for user-space mapping. */
2206         for (p = lscsa->ls; p < lscsa->ls + LS_SIZE; p += PAGE_SIZE)
2207                 SetPageReserved(vmalloc_to_page(p));
2208
2209         init_prob(csa);
2210         init_priv1(csa);
2211         init_priv2(csa);
2212 }
2213 EXPORT_SYMBOL_GPL(spu_init_csa);
2214
2215 void spu_fini_csa(struct spu_state *csa)
2216 {
2217         /* Clear reserved bit before vfree. */
2218         unsigned char *p;
2219         for (p = csa->lscsa->ls; p < csa->lscsa->ls + LS_SIZE; p += PAGE_SIZE)
2220                 ClearPageReserved(vmalloc_to_page(p));
2221
2222         vfree(csa->lscsa);
2223 }
2224 EXPORT_SYMBOL_GPL(spu_fini_csa);