git.oblomov.eu Git - linux-2.6/blob - drivers/net/wireless/rt2x00/rt2500pci.c

   1 /*
   2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
   3         <http://rt2x00.serialmonkey.com>
   4
   5         This program is free software; you can redistribute it and/or modify
   6         it under the terms of the GNU General Public License as published by
   7         the Free Software Foundation; either version 2 of the License, or
   8         (at your option) any later version.
   9
  10         This program is distributed in the hope that it will be useful,
  11         but WITHOUT ANY WARRANTY; without even the implied warranty of
  12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  13         GNU General Public License for more details.
  14
  15         You should have received a copy of the GNU General Public License
  16         along with this program; if not, write to the
  17         Free Software Foundation, Inc.,
  18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
  19  */
  20
  21 /*
  22         Module: rt2500pci
  23         Abstract: rt2500pci device specific routines.
  24         Supported chipsets: RT2560.
  25  */
  26
  27 #include <linux/delay.h>
  28 #include <linux/etherdevice.h>
  29 #include <linux/init.h>
  30 #include <linux/kernel.h>
  31 #include <linux/module.h>
  32 #include <linux/pci.h>
  33 #include <linux/eeprom_93cx6.h>
  34
  35 #include "rt2x00.h"
  36 #include "rt2x00pci.h"
  37 #include "rt2500pci.h"
  38
  39 /*
  40  * Register access.
  41  * All access to the CSR registers will go through the methods
  42  * rt2x00pci_register_read and rt2x00pci_register_write.
  43  * BBP and RF register require indirect register access,
  44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
  45  * These indirect registers work with busy bits,
  46  * and we will try maximal REGISTER_BUSY_COUNT times to access
  47  * the register while taking a REGISTER_BUSY_DELAY us delay
  48  * between each attampt. When the busy bit is still set at that time,
  49  * the access attempt is considered to have failed,
  50  * and we will print an error.
  51  */
  52 static u32 rt2500pci_bbp_check(struct rt2x00_dev *rt2x00dev)
  53 {
  54         u32 reg;
  55         unsigned int i;
  56
  57         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
  58                 rt2x00pci_register_read(rt2x00dev, BBPCSR, &reg);
  59                 if (!rt2x00_get_field32(reg, BBPCSR_BUSY))
  60                         break;
  61                 udelay(REGISTER_BUSY_DELAY);
  62         }
  63
  64         return reg;
  65 }
  66
  67 static void rt2500pci_bbp_write(struct rt2x00_dev *rt2x00dev,
  68                                 const unsigned int word, const u8 value)
  69 {
  70         u32 reg;
  71
  72         /*
  73          * Wait until the BBP becomes ready.
  74          */
  75         reg = rt2500pci_bbp_check(rt2x00dev);
  76         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
  77                 ERROR(rt2x00dev, "BBPCSR register busy. Write failed.\n");
  78                 return;
  79         }
  80
  81         /*
  82          * Write the data into the BBP.
  83          */
  84         reg = 0;
  85         rt2x00_set_field32(&reg, BBPCSR_VALUE, value);
  86         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
  87         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
  88         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 1);
  89
  90         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
  91 }
  92
  93 static void rt2500pci_bbp_read(struct rt2x00_dev *rt2x00dev,
  94                                const unsigned int word, u8 *value)
  95 {
  96         u32 reg;
  97
  98         /*
  99          * Wait until the BBP becomes ready.
 100          */
 101         reg = rt2500pci_bbp_check(rt2x00dev);
 102         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 103                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 104                 return;
 105         }
 106
 107         /*
 108          * Write the request into the BBP.
 109          */
 110         reg = 0;
 111         rt2x00_set_field32(&reg, BBPCSR_REGNUM, word);
 112         rt2x00_set_field32(&reg, BBPCSR_BUSY, 1);
 113         rt2x00_set_field32(&reg, BBPCSR_WRITE_CONTROL, 0);
 114
 115         rt2x00pci_register_write(rt2x00dev, BBPCSR, reg);
 116
 117         /*
 118          * Wait until the BBP becomes ready.
 119          */
 120         reg = rt2500pci_bbp_check(rt2x00dev);
 121         if (rt2x00_get_field32(reg, BBPCSR_BUSY)) {
 122                 ERROR(rt2x00dev, "BBPCSR register busy. Read failed.\n");
 123                 *value = 0xff;
 124                 return;
 125         }
 126
 127         *value = rt2x00_get_field32(reg, BBPCSR_VALUE);
 128 }
 129
 130 static void rt2500pci_rf_write(struct rt2x00_dev *rt2x00dev,
 131                                const unsigned int word, const u32 value)
 132 {
 133         u32 reg;
 134         unsigned int i;
 135
 136         if (!word)
 137                 return;
 138
 139         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 140                 rt2x00pci_register_read(rt2x00dev, RFCSR, &reg);
 141                 if (!rt2x00_get_field32(reg, RFCSR_BUSY))
 142                         goto rf_write;
 143                 udelay(REGISTER_BUSY_DELAY);
 144         }
 145
 146         ERROR(rt2x00dev, "RFCSR register busy. Write failed.\n");
 147         return;
 148
 149 rf_write:
 150         reg = 0;
 151         rt2x00_set_field32(&reg, RFCSR_VALUE, value);
 152         rt2x00_set_field32(&reg, RFCSR_NUMBER_OF_BITS, 20);
 153         rt2x00_set_field32(&reg, RFCSR_IF_SELECT, 0);
 154         rt2x00_set_field32(&reg, RFCSR_BUSY, 1);
 155
 156         rt2x00pci_register_write(rt2x00dev, RFCSR, reg);
 157         rt2x00_rf_write(rt2x00dev, word, value);
 158 }
 159
 160 static void rt2500pci_eepromregister_read(struct eeprom_93cx6 *eeprom)
 161 {
 162         struct rt2x00_dev *rt2x00dev = eeprom->data;
 163         u32 reg;
 164
 165         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
 166
 167         eeprom->reg_data_in = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_IN);
 168         eeprom->reg_data_out = !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_OUT);
 169         eeprom->reg_data_clock =
 170             !!rt2x00_get_field32(reg, CSR21_EEPROM_DATA_CLOCK);
 171         eeprom->reg_chip_select =
 172             !!rt2x00_get_field32(reg, CSR21_EEPROM_CHIP_SELECT);
 173 }
 174
 175 static void rt2500pci_eepromregister_write(struct eeprom_93cx6 *eeprom)
 176 {
 177         struct rt2x00_dev *rt2x00dev = eeprom->data;
 178         u32 reg = 0;
 179
 180         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_IN, !!eeprom->reg_data_in);
 181         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_OUT, !!eeprom->reg_data_out);
 182         rt2x00_set_field32(&reg, CSR21_EEPROM_DATA_CLOCK,
 183                            !!eeprom->reg_data_clock);
 184         rt2x00_set_field32(&reg, CSR21_EEPROM_CHIP_SELECT,
 185                            !!eeprom->reg_chip_select);
 186
 187         rt2x00pci_register_write(rt2x00dev, CSR21, reg);
 188 }
 189
 190 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
 191 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
 192
 193 static void rt2500pci_read_csr(struct rt2x00_dev *rt2x00dev,
 194                                const unsigned int word, u32 *data)
 195 {
 196         rt2x00pci_register_read(rt2x00dev, CSR_OFFSET(word), data);
 197 }
 198
 199 static void rt2500pci_write_csr(struct rt2x00_dev *rt2x00dev,
 200                                 const unsigned int word, u32 data)
 201 {
 202         rt2x00pci_register_write(rt2x00dev, CSR_OFFSET(word), data);
 203 }
 204
 205 static const struct rt2x00debug rt2500pci_rt2x00debug = {
 206         .owner  = THIS_MODULE,
 207         .csr    = {
 208                 .read           = rt2500pci_read_csr,
 209                 .write          = rt2500pci_write_csr,
 210                 .word_size      = sizeof(u32),
 211                 .word_count     = CSR_REG_SIZE / sizeof(u32),
 212         },
 213         .eeprom = {
 214                 .read           = rt2x00_eeprom_read,
 215                 .write          = rt2x00_eeprom_write,
 216                 .word_size      = sizeof(u16),
 217                 .word_count     = EEPROM_SIZE / sizeof(u16),
 218         },
 219         .bbp    = {
 220                 .read           = rt2500pci_bbp_read,
 221                 .write          = rt2500pci_bbp_write,
 222                 .word_size      = sizeof(u8),
 223                 .word_count     = BBP_SIZE / sizeof(u8),
 224         },
 225         .rf     = {
 226                 .read           = rt2x00_rf_read,
 227                 .write          = rt2500pci_rf_write,
 228                 .word_size      = sizeof(u32),
 229                 .word_count     = RF_SIZE / sizeof(u32),
 230         },
 231 };
 232 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
 233
 234 #ifdef CONFIG_RT2500PCI_RFKILL
 235 static int rt2500pci_rfkill_poll(struct rt2x00_dev *rt2x00dev)
 236 {
 237         u32 reg;
 238
 239         rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
 240         return rt2x00_get_field32(reg, GPIOCSR_BIT0);
 241 }
 242 #else
 243 #define rt2500pci_rfkill_poll   NULL
 244 #endif /* CONFIG_RT2500PCI_RFKILL */
 245
 246 #ifdef CONFIG_RT2500PCI_LEDS
 247 static void rt2500pci_brightness_set(struct led_classdev *led_cdev,
 248                                      enum led_brightness brightness)
 249 {
 250         struct rt2x00_led *led =
 251             container_of(led_cdev, struct rt2x00_led, led_dev);
 252         unsigned int enabled = brightness != LED_OFF;
 253         u32 reg;
 254
 255         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 256
 257         if (led->type == LED_TYPE_RADIO || led->type == LED_TYPE_ASSOC)
 258                 rt2x00_set_field32(&reg, LEDCSR_LINK, enabled);
 259         else if (led->type == LED_TYPE_ACTIVITY)
 260                 rt2x00_set_field32(&reg, LEDCSR_ACTIVITY, enabled);
 261
 262         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 263 }
 264
 265 static int rt2500pci_blink_set(struct led_classdev *led_cdev,
 266                                unsigned long *delay_on,
 267                                unsigned long *delay_off)
 268 {
 269         struct rt2x00_led *led =
 270             container_of(led_cdev, struct rt2x00_led, led_dev);
 271         u32 reg;
 272
 273         rt2x00pci_register_read(led->rt2x00dev, LEDCSR, &reg);
 274         rt2x00_set_field32(&reg, LEDCSR_ON_PERIOD, *delay_on);
 275         rt2x00_set_field32(&reg, LEDCSR_OFF_PERIOD, *delay_off);
 276         rt2x00pci_register_write(led->rt2x00dev, LEDCSR, reg);
 277
 278         return 0;
 279 }
 280 #endif /* CONFIG_RT2500PCI_LEDS */
 281
 282 /*
 283  * Configuration handlers.
 284  */
 285 static void rt2500pci_config_filter(struct rt2x00_dev *rt2x00dev,
 286                                     const unsigned int filter_flags)
 287 {
 288         u32 reg;
 289
 290         /*
 291          * Start configuration steps.
 292          * Note that the version error will always be dropped
 293          * and broadcast frames will always be accepted since
 294          * there is no filter for it at this time.
 295          */
 296         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
 297         rt2x00_set_field32(&reg, RXCSR0_DROP_CRC,
 298                            !(filter_flags & FIF_FCSFAIL));
 299         rt2x00_set_field32(&reg, RXCSR0_DROP_PHYSICAL,
 300                            !(filter_flags & FIF_PLCPFAIL));
 301         rt2x00_set_field32(&reg, RXCSR0_DROP_CONTROL,
 302                            !(filter_flags & FIF_CONTROL));
 303         rt2x00_set_field32(&reg, RXCSR0_DROP_NOT_TO_ME,
 304                            !(filter_flags & FIF_PROMISC_IN_BSS));
 305         rt2x00_set_field32(&reg, RXCSR0_DROP_TODS,
 306                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
 307                            !rt2x00dev->intf_ap_count);
 308         rt2x00_set_field32(&reg, RXCSR0_DROP_VERSION_ERROR, 1);
 309         rt2x00_set_field32(&reg, RXCSR0_DROP_MCAST,
 310                            !(filter_flags & FIF_ALLMULTI));
 311         rt2x00_set_field32(&reg, RXCSR0_DROP_BCAST, 0);
 312         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
 313 }
 314
 315 static void rt2500pci_config_intf(struct rt2x00_dev *rt2x00dev,
 316                                   struct rt2x00_intf *intf,
 317                                   struct rt2x00intf_conf *conf,
 318                                   const unsigned int flags)
 319 {
 320         struct data_queue *queue =
 321             rt2x00queue_get_queue(rt2x00dev, RT2X00_BCN_QUEUE_BEACON);
 322         unsigned int bcn_preload;
 323         u32 reg;
 324
 325         if (flags & CONFIG_UPDATE_TYPE) {
 326                 /*
 327                  * Enable beacon config
 328                  */
 329                 bcn_preload = PREAMBLE + get_duration(IEEE80211_HEADER, 20);
 330                 rt2x00pci_register_read(rt2x00dev, BCNCSR1, &reg);
 331                 rt2x00_set_field32(&reg, BCNCSR1_PRELOAD, bcn_preload);
 332                 rt2x00_set_field32(&reg, BCNCSR1_BEACON_CWMIN, queue->cw_min);
 333                 rt2x00pci_register_write(rt2x00dev, BCNCSR1, reg);
 334
 335                 /*
 336                  * Enable synchronisation.
 337                  */
 338                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 339                 rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
 340                 rt2x00_set_field32(&reg, CSR14_TSF_SYNC, conf->sync);
 341                 rt2x00_set_field32(&reg, CSR14_TBCN, 1);
 342                 rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 343         }
 344
 345         if (flags & CONFIG_UPDATE_MAC)
 346                 rt2x00pci_register_multiwrite(rt2x00dev, CSR3,
 347                                               conf->mac, sizeof(conf->mac));
 348
 349         if (flags & CONFIG_UPDATE_BSSID)
 350                 rt2x00pci_register_multiwrite(rt2x00dev, CSR5,
 351                                               conf->bssid, sizeof(conf->bssid));
 352 }
 353
 354 static void rt2500pci_config_erp(struct rt2x00_dev *rt2x00dev,
 355                                  struct rt2x00lib_erp *erp)
 356 {
 357         int preamble_mask;
 358         u32 reg;
 359
 360         /*
 361          * When short preamble is enabled, we should set bit 0x08
 362          */
 363         preamble_mask = erp->short_preamble << 3;
 364
 365         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 366         rt2x00_set_field32(&reg, TXCSR1_ACK_TIMEOUT,
 367                            erp->ack_timeout);
 368         rt2x00_set_field32(&reg, TXCSR1_ACK_CONSUME_TIME,
 369                            erp->ack_consume_time);
 370         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 371
 372         rt2x00pci_register_read(rt2x00dev, ARCSR2, &reg);
 373         rt2x00_set_field32(&reg, ARCSR2_SIGNAL, 0x00);
 374         rt2x00_set_field32(&reg, ARCSR2_SERVICE, 0x04);
 375         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 10));
 376         rt2x00pci_register_write(rt2x00dev, ARCSR2, reg);
 377
 378         rt2x00pci_register_read(rt2x00dev, ARCSR3, &reg);
 379         rt2x00_set_field32(&reg, ARCSR3_SIGNAL, 0x01 | preamble_mask);
 380         rt2x00_set_field32(&reg, ARCSR3_SERVICE, 0x04);
 381         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 20));
 382         rt2x00pci_register_write(rt2x00dev, ARCSR3, reg);
 383
 384         rt2x00pci_register_read(rt2x00dev, ARCSR4, &reg);
 385         rt2x00_set_field32(&reg, ARCSR4_SIGNAL, 0x02 | preamble_mask);
 386         rt2x00_set_field32(&reg, ARCSR4_SERVICE, 0x04);
 387         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 55));
 388         rt2x00pci_register_write(rt2x00dev, ARCSR4, reg);
 389
 390         rt2x00pci_register_read(rt2x00dev, ARCSR5, &reg);
 391         rt2x00_set_field32(&reg, ARCSR5_SIGNAL, 0x03 | preamble_mask);
 392         rt2x00_set_field32(&reg, ARCSR5_SERVICE, 0x84);
 393         rt2x00_set_field32(&reg, ARCSR2_LENGTH, get_duration(ACK_SIZE, 110));
 394         rt2x00pci_register_write(rt2x00dev, ARCSR5, reg);
 395 }
 396
 397 static void rt2500pci_config_phymode(struct rt2x00_dev *rt2x00dev,
 398                                      const int basic_rate_mask)
 399 {
 400         rt2x00pci_register_write(rt2x00dev, ARCSR1, basic_rate_mask);
 401 }
 402
 403 static void rt2500pci_config_channel(struct rt2x00_dev *rt2x00dev,
 404                                      struct rf_channel *rf, const int txpower)
 405 {
 406         u8 r70;
 407
 408         /*
 409          * Set TXpower.
 410          */
 411         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 412
 413         /*
 414          * Switch on tuning bits.
 415          * For RT2523 devices we do not need to update the R1 register.
 416          */
 417         if (!rt2x00_rf(&rt2x00dev->chip, RF2523))
 418                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 1);
 419         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 1);
 420
 421         /*
 422          * For RT2525 we should first set the channel to half band higher.
 423          */
 424         if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
 425                 static const u32 vals[] = {
 426                         0x00080cbe, 0x00080d02, 0x00080d06, 0x00080d0a,
 427                         0x00080d0e, 0x00080d12, 0x00080d16, 0x00080d1a,
 428                         0x00080d1e, 0x00080d22, 0x00080d26, 0x00080d2a,
 429                         0x00080d2e, 0x00080d3a
 430                 };
 431
 432                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 433                 rt2500pci_rf_write(rt2x00dev, 2, vals[rf->channel - 1]);
 434                 rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 435                 if (rf->rf4)
 436                         rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 437         }
 438
 439         rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 440         rt2500pci_rf_write(rt2x00dev, 2, rf->rf2);
 441         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 442         if (rf->rf4)
 443                 rt2500pci_rf_write(rt2x00dev, 4, rf->rf4);
 444
 445         /*
 446          * Channel 14 requires the Japan filter bit to be set.
 447          */
 448         r70 = 0x46;
 449         rt2x00_set_field8(&r70, BBP_R70_JAPAN_FILTER, rf->channel == 14);
 450         rt2500pci_bbp_write(rt2x00dev, 70, r70);
 451
 452         msleep(1);
 453
 454         /*
 455          * Switch off tuning bits.
 456          * For RT2523 devices we do not need to update the R1 register.
 457          */
 458         if (!rt2x00_rf(&rt2x00dev->chip, RF2523)) {
 459                 rt2x00_set_field32(&rf->rf1, RF1_TUNER, 0);
 460                 rt2500pci_rf_write(rt2x00dev, 1, rf->rf1);
 461         }
 462
 463         rt2x00_set_field32(&rf->rf3, RF3_TUNER, 0);
 464         rt2500pci_rf_write(rt2x00dev, 3, rf->rf3);
 465
 466         /*
 467          * Clear false CRC during channel switch.
 468          */
 469         rt2x00pci_register_read(rt2x00dev, CNT0, &rf->rf1);
 470 }
 471
 472 static void rt2500pci_config_txpower(struct rt2x00_dev *rt2x00dev,
 473                                      const int txpower)
 474 {
 475         u32 rf3;
 476
 477         rt2x00_rf_read(rt2x00dev, 3, &rf3);
 478         rt2x00_set_field32(&rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
 479         rt2500pci_rf_write(rt2x00dev, 3, rf3);
 480 }
 481
 482 static void rt2500pci_config_antenna(struct rt2x00_dev *rt2x00dev,
 483                                      struct antenna_setup *ant)
 484 {
 485         u32 reg;
 486         u8 r14;
 487         u8 r2;
 488
 489         /*
 490          * We should never come here because rt2x00lib is supposed
 491          * to catch this and send us the correct antenna explicitely.
 492          */
 493         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
 494                ant->tx == ANTENNA_SW_DIVERSITY);
 495
 496         rt2x00pci_register_read(rt2x00dev, BBPCSR1, &reg);
 497         rt2500pci_bbp_read(rt2x00dev, 14, &r14);
 498         rt2500pci_bbp_read(rt2x00dev, 2, &r2);
 499
 500         /*
 501          * Configure the TX antenna.
 502          */
 503         switch (ant->tx) {
 504         case ANTENNA_A:
 505                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 0);
 506                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 0);
 507                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 0);
 508                 break;
 509         case ANTENNA_B:
 510         default:
 511                 rt2x00_set_field8(&r2, BBP_R2_TX_ANTENNA, 2);
 512                 rt2x00_set_field32(&reg, BBPCSR1_CCK, 2);
 513                 rt2x00_set_field32(&reg, BBPCSR1_OFDM, 2);
 514                 break;
 515         }
 516
 517         /*
 518          * Configure the RX antenna.
 519          */
 520         switch (ant->rx) {
 521         case ANTENNA_A:
 522                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 0);
 523                 break;
 524         case ANTENNA_B:
 525         default:
 526                 rt2x00_set_field8(&r14, BBP_R14_RX_ANTENNA, 2);
 527                 break;
 528         }
 529
 530         /*
 531          * RT2525E and RT5222 need to flip TX I/Q
 532          */
 533         if (rt2x00_rf(&rt2x00dev->chip, RF2525E) ||
 534             rt2x00_rf(&rt2x00dev->chip, RF5222)) {
 535                 rt2x00_set_field8(&r2, BBP_R2_TX_IQ_FLIP, 1);
 536                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 1);
 537                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 1);
 538
 539                 /*
 540                  * RT2525E does not need RX I/Q Flip.
 541                  */
 542                 if (rt2x00_rf(&rt2x00dev->chip, RF2525E))
 543                         rt2x00_set_field8(&r14, BBP_R14_RX_IQ_FLIP, 0);
 544         } else {
 545                 rt2x00_set_field32(&reg, BBPCSR1_CCK_FLIP, 0);
 546                 rt2x00_set_field32(&reg, BBPCSR1_OFDM_FLIP, 0);
 547         }
 548
 549         rt2x00pci_register_write(rt2x00dev, BBPCSR1, reg);
 550         rt2500pci_bbp_write(rt2x00dev, 14, r14);
 551         rt2500pci_bbp_write(rt2x00dev, 2, r2);
 552 }
 553
 554 static void rt2500pci_config_duration(struct rt2x00_dev *rt2x00dev,
 555                                       struct rt2x00lib_conf *libconf)
 556 {
 557         u32 reg;
 558
 559         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 560         rt2x00_set_field32(&reg, CSR11_SLOT_TIME, libconf->slot_time);
 561         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 562
 563         rt2x00pci_register_read(rt2x00dev, CSR18, &reg);
 564         rt2x00_set_field32(&reg, CSR18_SIFS, libconf->sifs);
 565         rt2x00_set_field32(&reg, CSR18_PIFS, libconf->pifs);
 566         rt2x00pci_register_write(rt2x00dev, CSR18, reg);
 567
 568         rt2x00pci_register_read(rt2x00dev, CSR19, &reg);
 569         rt2x00_set_field32(&reg, CSR19_DIFS, libconf->difs);
 570         rt2x00_set_field32(&reg, CSR19_EIFS, libconf->eifs);
 571         rt2x00pci_register_write(rt2x00dev, CSR19, reg);
 572
 573         rt2x00pci_register_read(rt2x00dev, TXCSR1, &reg);
 574         rt2x00_set_field32(&reg, TXCSR1_TSF_OFFSET, IEEE80211_HEADER);
 575         rt2x00_set_field32(&reg, TXCSR1_AUTORESPONDER, 1);
 576         rt2x00pci_register_write(rt2x00dev, TXCSR1, reg);
 577
 578         rt2x00pci_register_read(rt2x00dev, CSR12, &reg);
 579         rt2x00_set_field32(&reg, CSR12_BEACON_INTERVAL,
 580                            libconf->conf->beacon_int * 16);
 581         rt2x00_set_field32(&reg, CSR12_CFP_MAX_DURATION,
 582                            libconf->conf->beacon_int * 16);
 583         rt2x00pci_register_write(rt2x00dev, CSR12, reg);
 584 }
 585
 586 static void rt2500pci_config(struct rt2x00_dev *rt2x00dev,
 587                              struct rt2x00lib_conf *libconf,
 588                              const unsigned int flags)
 589 {
 590         if (flags & CONFIG_UPDATE_PHYMODE)
 591                 rt2500pci_config_phymode(rt2x00dev, libconf->basic_rates);
 592         if (flags & CONFIG_UPDATE_CHANNEL)
 593                 rt2500pci_config_channel(rt2x00dev, &libconf->rf,
 594                                          libconf->conf->power_level);
 595         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
 596                 rt2500pci_config_txpower(rt2x00dev,
 597                                          libconf->conf->power_level);
 598         if (flags & CONFIG_UPDATE_ANTENNA)
 599                 rt2500pci_config_antenna(rt2x00dev, &libconf->ant);
 600         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
 601                 rt2500pci_config_duration(rt2x00dev, libconf);
 602 }
 603
 604 /*
 605  * Link tuning
 606  */
 607 static void rt2500pci_link_stats(struct rt2x00_dev *rt2x00dev,
 608                                  struct link_qual *qual)
 609 {
 610         u32 reg;
 611
 612         /*
 613          * Update FCS error count from register.
 614          */
 615         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 616         qual->rx_failed = rt2x00_get_field32(reg, CNT0_FCS_ERROR);
 617
 618         /*
 619          * Update False CCA count from register.
 620          */
 621         rt2x00pci_register_read(rt2x00dev, CNT3, &reg);
 622         qual->false_cca = rt2x00_get_field32(reg, CNT3_FALSE_CCA);
 623 }
 624
 625 static void rt2500pci_reset_tuner(struct rt2x00_dev *rt2x00dev)
 626 {
 627         rt2500pci_bbp_write(rt2x00dev, 17, 0x48);
 628         rt2x00dev->link.vgc_level = 0x48;
 629 }
 630
 631 static void rt2500pci_link_tuner(struct rt2x00_dev *rt2x00dev)
 632 {
 633         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
 634         u8 r17;
 635
 636         /*
 637          * To prevent collisions with MAC ASIC on chipsets
 638          * up to version C the link tuning should halt after 20
 639          * seconds while being associated.
 640          */
 641         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D &&
 642             rt2x00dev->intf_associated &&
 643             rt2x00dev->link.count > 20)
 644                 return;
 645
 646         rt2500pci_bbp_read(rt2x00dev, 17, &r17);
 647
 648         /*
 649          * Chipset versions C and lower should directly continue
 650          * to the dynamic CCA tuning. Chipset version D and higher
 651          * should go straight to dynamic CCA tuning when they
 652          * are not associated.
 653          */
 654         if (rt2x00_rev(&rt2x00dev->chip) < RT2560_VERSION_D ||
 655             !rt2x00dev->intf_associated)
 656                 goto dynamic_cca_tune;
 657
 658         /*
 659          * A too low RSSI will cause too much false CCA which will
 660          * then corrupt the R17 tuning. To remidy this the tuning should
 661          * be stopped (While making sure the R17 value will not exceed limits)
 662          */
 663         if (rssi < -80 && rt2x00dev->link.count > 20) {
 664                 if (r17 >= 0x41) {
 665                         r17 = rt2x00dev->link.vgc_level;
 666                         rt2500pci_bbp_write(rt2x00dev, 17, r17);
 667                 }
 668                 return;
 669         }
 670
 671         /*
 672          * Special big-R17 for short distance
 673          */
 674         if (rssi >= -58) {
 675                 if (r17 != 0x50)
 676                         rt2500pci_bbp_write(rt2x00dev, 17, 0x50);
 677                 return;
 678         }
 679
 680         /*
 681          * Special mid-R17 for middle distance
 682          */
 683         if (rssi >= -74) {
 684                 if (r17 != 0x41)
 685                         rt2500pci_bbp_write(rt2x00dev, 17, 0x41);
 686                 return;
 687         }
 688
 689         /*
 690          * Leave short or middle distance condition, restore r17
 691          * to the dynamic tuning range.
 692          */
 693         if (r17 >= 0x41) {
 694                 rt2500pci_bbp_write(rt2x00dev, 17, rt2x00dev->link.vgc_level);
 695                 return;
 696         }
 697
 698 dynamic_cca_tune:
 699
 700         /*
 701          * R17 is inside the dynamic tuning range,
 702          * start tuning the link based on the false cca counter.
 703          */
 704         if (rt2x00dev->link.qual.false_cca > 512 && r17 < 0x40) {
 705                 rt2500pci_bbp_write(rt2x00dev, 17, ++r17);
 706                 rt2x00dev->link.vgc_level = r17;
 707         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > 0x32) {
 708                 rt2500pci_bbp_write(rt2x00dev, 17, --r17);
 709                 rt2x00dev->link.vgc_level = r17;
 710         }
 711 }
 712
 713 /*
 714  * Initialization functions.
 715  */
 716 static void rt2500pci_init_rxentry(struct rt2x00_dev *rt2x00dev,
 717                                    struct queue_entry *entry)
 718 {
 719         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
 720         u32 word;
 721
 722         rt2x00_desc_read(priv_rx->desc, 1, &word);
 723         rt2x00_set_field32(&word, RXD_W1_BUFFER_ADDRESS, priv_rx->data_dma);
 724         rt2x00_desc_write(priv_rx->desc, 1, word);
 725
 726         rt2x00_desc_read(priv_rx->desc, 0, &word);
 727         rt2x00_set_field32(&word, RXD_W0_OWNER_NIC, 1);
 728         rt2x00_desc_write(priv_rx->desc, 0, word);
 729 }
 730
 731 static void rt2500pci_init_txentry(struct rt2x00_dev *rt2x00dev,
 732                                    struct queue_entry *entry)
 733 {
 734         struct queue_entry_priv_pci_tx *priv_tx = entry->priv_data;
 735         u32 word;
 736
 737         rt2x00_desc_read(priv_tx->desc, 1, &word);
 738         rt2x00_set_field32(&word, TXD_W1_BUFFER_ADDRESS, priv_tx->data_dma);
 739         rt2x00_desc_write(priv_tx->desc, 1, word);
 740
 741         rt2x00_desc_read(priv_tx->desc, 0, &word);
 742         rt2x00_set_field32(&word, TXD_W0_VALID, 0);
 743         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 0);
 744         rt2x00_desc_write(priv_tx->desc, 0, word);
 745 }
 746
 747 static int rt2500pci_init_queues(struct rt2x00_dev *rt2x00dev)
 748 {
 749         struct queue_entry_priv_pci_rx *priv_rx;
 750         struct queue_entry_priv_pci_tx *priv_tx;
 751         u32 reg;
 752
 753         /*
 754          * Initialize registers.
 755          */
 756         rt2x00pci_register_read(rt2x00dev, TXCSR2, &reg);
 757         rt2x00_set_field32(&reg, TXCSR2_TXD_SIZE, rt2x00dev->tx[0].desc_size);
 758         rt2x00_set_field32(&reg, TXCSR2_NUM_TXD, rt2x00dev->tx[1].limit);
 759         rt2x00_set_field32(&reg, TXCSR2_NUM_ATIM, rt2x00dev->bcn[1].limit);
 760         rt2x00_set_field32(&reg, TXCSR2_NUM_PRIO, rt2x00dev->tx[0].limit);
 761         rt2x00pci_register_write(rt2x00dev, TXCSR2, reg);
 762
 763         priv_tx = rt2x00dev->tx[1].entries[0].priv_data;
 764         rt2x00pci_register_read(rt2x00dev, TXCSR3, &reg);
 765         rt2x00_set_field32(&reg, TXCSR3_TX_RING_REGISTER,
 766                            priv_tx->desc_dma);
 767         rt2x00pci_register_write(rt2x00dev, TXCSR3, reg);
 768
 769         priv_tx = rt2x00dev->tx[0].entries[0].priv_data;
 770         rt2x00pci_register_read(rt2x00dev, TXCSR5, &reg);
 771         rt2x00_set_field32(&reg, TXCSR5_PRIO_RING_REGISTER,
 772                            priv_tx->desc_dma);
 773         rt2x00pci_register_write(rt2x00dev, TXCSR5, reg);
 774
 775         priv_tx = rt2x00dev->bcn[1].entries[0].priv_data;
 776         rt2x00pci_register_read(rt2x00dev, TXCSR4, &reg);
 777         rt2x00_set_field32(&reg, TXCSR4_ATIM_RING_REGISTER,
 778                            priv_tx->desc_dma);
 779         rt2x00pci_register_write(rt2x00dev, TXCSR4, reg);
 780
 781         priv_tx = rt2x00dev->bcn[0].entries[0].priv_data;
 782         rt2x00pci_register_read(rt2x00dev, TXCSR6, &reg);
 783         rt2x00_set_field32(&reg, TXCSR6_BEACON_RING_REGISTER,
 784                            priv_tx->desc_dma);
 785         rt2x00pci_register_write(rt2x00dev, TXCSR6, reg);
 786
 787         rt2x00pci_register_read(rt2x00dev, RXCSR1, &reg);
 788         rt2x00_set_field32(&reg, RXCSR1_RXD_SIZE, rt2x00dev->rx->desc_size);
 789         rt2x00_set_field32(&reg, RXCSR1_NUM_RXD, rt2x00dev->rx->limit);
 790         rt2x00pci_register_write(rt2x00dev, RXCSR1, reg);
 791
 792         priv_rx = rt2x00dev->rx->entries[0].priv_data;
 793         rt2x00pci_register_read(rt2x00dev, RXCSR2, &reg);
 794         rt2x00_set_field32(&reg, RXCSR2_RX_RING_REGISTER, priv_rx->desc_dma);
 795         rt2x00pci_register_write(rt2x00dev, RXCSR2, reg);
 796
 797         return 0;
 798 }
 799
 800 static int rt2500pci_init_registers(struct rt2x00_dev *rt2x00dev)
 801 {
 802         u32 reg;
 803
 804         rt2x00pci_register_write(rt2x00dev, PSCSR0, 0x00020002);
 805         rt2x00pci_register_write(rt2x00dev, PSCSR1, 0x00000002);
 806         rt2x00pci_register_write(rt2x00dev, PSCSR2, 0x00020002);
 807         rt2x00pci_register_write(rt2x00dev, PSCSR3, 0x00000002);
 808
 809         rt2x00pci_register_read(rt2x00dev, TIMECSR, &reg);
 810         rt2x00_set_field32(&reg, TIMECSR_US_COUNT, 33);
 811         rt2x00_set_field32(&reg, TIMECSR_US_64_COUNT, 63);
 812         rt2x00_set_field32(&reg, TIMECSR_BEACON_EXPECT, 0);
 813         rt2x00pci_register_write(rt2x00dev, TIMECSR, reg);
 814
 815         rt2x00pci_register_read(rt2x00dev, CSR9, &reg);
 816         rt2x00_set_field32(&reg, CSR9_MAX_FRAME_UNIT,
 817                            rt2x00dev->rx->data_size / 128);
 818         rt2x00pci_register_write(rt2x00dev, CSR9, reg);
 819
 820         /*
 821          * Always use CWmin and CWmax set in descriptor.
 822          */
 823         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
 824         rt2x00_set_field32(&reg, CSR11_CW_SELECT, 0);
 825         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
 826
 827         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
 828         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
 829         rt2x00_set_field32(&reg, CSR14_TSF_SYNC, 0);
 830         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
 831         rt2x00_set_field32(&reg, CSR14_TCFP, 0);
 832         rt2x00_set_field32(&reg, CSR14_TATIMW, 0);
 833         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
 834         rt2x00_set_field32(&reg, CSR14_CFP_COUNT_PRELOAD, 0);
 835         rt2x00_set_field32(&reg, CSR14_TBCM_PRELOAD, 0);
 836         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
 837
 838         rt2x00pci_register_write(rt2x00dev, CNT3, 0);
 839
 840         rt2x00pci_register_read(rt2x00dev, TXCSR8, &reg);
 841         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0, 10);
 842         rt2x00_set_field32(&reg, TXCSR8_BBP_ID0_VALID, 1);
 843         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1, 11);
 844         rt2x00_set_field32(&reg, TXCSR8_BBP_ID1_VALID, 1);
 845         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2, 13);
 846         rt2x00_set_field32(&reg, TXCSR8_BBP_ID2_VALID, 1);
 847         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3, 12);
 848         rt2x00_set_field32(&reg, TXCSR8_BBP_ID3_VALID, 1);
 849         rt2x00pci_register_write(rt2x00dev, TXCSR8, reg);
 850
 851         rt2x00pci_register_read(rt2x00dev, ARTCSR0, &reg);
 852         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_1MBS, 112);
 853         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_2MBS, 56);
 854         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_5_5MBS, 20);
 855         rt2x00_set_field32(&reg, ARTCSR0_ACK_CTS_11MBS, 10);
 856         rt2x00pci_register_write(rt2x00dev, ARTCSR0, reg);
 857
 858         rt2x00pci_register_read(rt2x00dev, ARTCSR1, &reg);
 859         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_6MBS, 45);
 860         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_9MBS, 37);
 861         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_12MBS, 33);
 862         rt2x00_set_field32(&reg, ARTCSR1_ACK_CTS_18MBS, 29);
 863         rt2x00pci_register_write(rt2x00dev, ARTCSR1, reg);
 864
 865         rt2x00pci_register_read(rt2x00dev, ARTCSR2, &reg);
 866         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_24MBS, 29);
 867         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_36MBS, 25);
 868         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_48MBS, 25);
 869         rt2x00_set_field32(&reg, ARTCSR2_ACK_CTS_54MBS, 25);
 870         rt2x00pci_register_write(rt2x00dev, ARTCSR2, reg);
 871
 872         rt2x00pci_register_read(rt2x00dev, RXCSR3, &reg);
 873         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0, 47); /* CCK Signal */
 874         rt2x00_set_field32(&reg, RXCSR3_BBP_ID0_VALID, 1);
 875         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1, 51); /* Rssi */
 876         rt2x00_set_field32(&reg, RXCSR3_BBP_ID1_VALID, 1);
 877         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2, 42); /* OFDM Rate */
 878         rt2x00_set_field32(&reg, RXCSR3_BBP_ID2_VALID, 1);
 879         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3, 51); /* RSSI */
 880         rt2x00_set_field32(&reg, RXCSR3_BBP_ID3_VALID, 1);
 881         rt2x00pci_register_write(rt2x00dev, RXCSR3, reg);
 882
 883         rt2x00pci_register_read(rt2x00dev, PCICSR, &reg);
 884         rt2x00_set_field32(&reg, PCICSR_BIG_ENDIAN, 0);
 885         rt2x00_set_field32(&reg, PCICSR_RX_TRESHOLD, 0);
 886         rt2x00_set_field32(&reg, PCICSR_TX_TRESHOLD, 3);
 887         rt2x00_set_field32(&reg, PCICSR_BURST_LENTH, 1);
 888         rt2x00_set_field32(&reg, PCICSR_ENABLE_CLK, 1);
 889         rt2x00_set_field32(&reg, PCICSR_READ_MULTIPLE, 1);
 890         rt2x00_set_field32(&reg, PCICSR_WRITE_INVALID, 1);
 891         rt2x00pci_register_write(rt2x00dev, PCICSR, reg);
 892
 893         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0x3f3b3100);
 894
 895         rt2x00pci_register_write(rt2x00dev, GPIOCSR, 0x0000ff00);
 896         rt2x00pci_register_write(rt2x00dev, TESTCSR, 0x000000f0);
 897
 898         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
 899                 return -EBUSY;
 900
 901         rt2x00pci_register_write(rt2x00dev, MACCSR0, 0x00213223);
 902         rt2x00pci_register_write(rt2x00dev, MACCSR1, 0x00235518);
 903
 904         rt2x00pci_register_read(rt2x00dev, MACCSR2, &reg);
 905         rt2x00_set_field32(&reg, MACCSR2_DELAY, 64);
 906         rt2x00pci_register_write(rt2x00dev, MACCSR2, reg);
 907
 908         rt2x00pci_register_read(rt2x00dev, RALINKCSR, &reg);
 909         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA0, 17);
 910         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID0, 26);
 911         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID0, 1);
 912         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_DATA1, 0);
 913         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_ID1, 26);
 914         rt2x00_set_field32(&reg, RALINKCSR_AR_BBP_VALID1, 1);
 915         rt2x00pci_register_write(rt2x00dev, RALINKCSR, reg);
 916
 917         rt2x00pci_register_write(rt2x00dev, BBPCSR1, 0x82188200);
 918
 919         rt2x00pci_register_write(rt2x00dev, TXACKCSR0, 0x00000020);
 920
 921         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 922         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 1);
 923         rt2x00_set_field32(&reg, CSR1_BBP_RESET, 0);
 924         rt2x00_set_field32(&reg, CSR1_HOST_READY, 0);
 925         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 926
 927         rt2x00pci_register_read(rt2x00dev, CSR1, &reg);
 928         rt2x00_set_field32(&reg, CSR1_SOFT_RESET, 0);
 929         rt2x00_set_field32(&reg, CSR1_HOST_READY, 1);
 930         rt2x00pci_register_write(rt2x00dev, CSR1, reg);
 931
 932         /*
 933          * We must clear the FCS and FIFO error count.
 934          * These registers are cleared on read,
 935          * so we may pass a useless variable to store the value.
 936          */
 937         rt2x00pci_register_read(rt2x00dev, CNT0, &reg);
 938         rt2x00pci_register_read(rt2x00dev, CNT4, &reg);
 939
 940         return 0;
 941 }
 942
 943 static int rt2500pci_init_bbp(struct rt2x00_dev *rt2x00dev)
 944 {
 945         unsigned int i;
 946         u16 eeprom;
 947         u8 reg_id;
 948         u8 value;
 949
 950         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
 951                 rt2500pci_bbp_read(rt2x00dev, 0, &value);
 952                 if ((value != 0xff) && (value != 0x00))
 953                         goto continue_csr_init;
 954                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
 955                 udelay(REGISTER_BUSY_DELAY);
 956         }
 957
 958         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
 959         return -EACCES;
 960
 961 continue_csr_init:
 962         rt2500pci_bbp_write(rt2x00dev, 3, 0x02);
 963         rt2500pci_bbp_write(rt2x00dev, 4, 0x19);
 964         rt2500pci_bbp_write(rt2x00dev, 14, 0x1c);
 965         rt2500pci_bbp_write(rt2x00dev, 15, 0x30);
 966         rt2500pci_bbp_write(rt2x00dev, 16, 0xac);
 967         rt2500pci_bbp_write(rt2x00dev, 18, 0x18);
 968         rt2500pci_bbp_write(rt2x00dev, 19, 0xff);
 969         rt2500pci_bbp_write(rt2x00dev, 20, 0x1e);
 970         rt2500pci_bbp_write(rt2x00dev, 21, 0x08);
 971         rt2500pci_bbp_write(rt2x00dev, 22, 0x08);
 972         rt2500pci_bbp_write(rt2x00dev, 23, 0x08);
 973         rt2500pci_bbp_write(rt2x00dev, 24, 0x70);
 974         rt2500pci_bbp_write(rt2x00dev, 25, 0x40);
 975         rt2500pci_bbp_write(rt2x00dev, 26, 0x08);
 976         rt2500pci_bbp_write(rt2x00dev, 27, 0x23);
 977         rt2500pci_bbp_write(rt2x00dev, 30, 0x10);
 978         rt2500pci_bbp_write(rt2x00dev, 31, 0x2b);
 979         rt2500pci_bbp_write(rt2x00dev, 32, 0xb9);
 980         rt2500pci_bbp_write(rt2x00dev, 34, 0x12);
 981         rt2500pci_bbp_write(rt2x00dev, 35, 0x50);
 982         rt2500pci_bbp_write(rt2x00dev, 39, 0xc4);
 983         rt2500pci_bbp_write(rt2x00dev, 40, 0x02);
 984         rt2500pci_bbp_write(rt2x00dev, 41, 0x60);
 985         rt2500pci_bbp_write(rt2x00dev, 53, 0x10);
 986         rt2500pci_bbp_write(rt2x00dev, 54, 0x18);
 987         rt2500pci_bbp_write(rt2x00dev, 56, 0x08);
 988         rt2500pci_bbp_write(rt2x00dev, 57, 0x10);
 989         rt2500pci_bbp_write(rt2x00dev, 58, 0x08);
 990         rt2500pci_bbp_write(rt2x00dev, 61, 0x6d);
 991         rt2500pci_bbp_write(rt2x00dev, 62, 0x10);
 992
 993         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
 994                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
 995
 996                 if (eeprom != 0xffff && eeprom != 0x0000) {
 997                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
 998                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
 999                         rt2500pci_bbp_write(rt2x00dev, reg_id, value);
1000                 }
1001         }
1002
1003         return 0;
1004 }
1005
1006 /*
1007  * Device state switch handlers.
1008  */
1009 static void rt2500pci_toggle_rx(struct rt2x00_dev *rt2x00dev,
1010                                 enum dev_state state)
1011 {
1012         u32 reg;
1013
1014         rt2x00pci_register_read(rt2x00dev, RXCSR0, &reg);
1015         rt2x00_set_field32(&reg, RXCSR0_DISABLE_RX,
1016                            state == STATE_RADIO_RX_OFF);
1017         rt2x00pci_register_write(rt2x00dev, RXCSR0, reg);
1018 }
1019
1020 static void rt2500pci_toggle_irq(struct rt2x00_dev *rt2x00dev,
1021                                  enum dev_state state)
1022 {
1023         int mask = (state == STATE_RADIO_IRQ_OFF);
1024         u32 reg;
1025
1026         /*
1027          * When interrupts are being enabled, the interrupt registers
1028          * should clear the register to assure a clean state.
1029          */
1030         if (state == STATE_RADIO_IRQ_ON) {
1031                 rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1032                 rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1033         }
1034
1035         /*
1036          * Only toggle the interrupts bits we are going to use.
1037          * Non-checked interrupt bits are disabled by default.
1038          */
1039         rt2x00pci_register_read(rt2x00dev, CSR8, &reg);
1040         rt2x00_set_field32(&reg, CSR8_TBCN_EXPIRE, mask);
1041         rt2x00_set_field32(&reg, CSR8_TXDONE_TXRING, mask);
1042         rt2x00_set_field32(&reg, CSR8_TXDONE_ATIMRING, mask);
1043         rt2x00_set_field32(&reg, CSR8_TXDONE_PRIORING, mask);
1044         rt2x00_set_field32(&reg, CSR8_RXDONE, mask);
1045         rt2x00pci_register_write(rt2x00dev, CSR8, reg);
1046 }
1047
1048 static int rt2500pci_enable_radio(struct rt2x00_dev *rt2x00dev)
1049 {
1050         /*
1051          * Initialize all registers.
1052          */
1053         if (rt2500pci_init_queues(rt2x00dev) ||
1054             rt2500pci_init_registers(rt2x00dev) ||
1055             rt2500pci_init_bbp(rt2x00dev)) {
1056                 ERROR(rt2x00dev, "Register initialization failed.\n");
1057                 return -EIO;
1058         }
1059
1060         /*
1061          * Enable interrupts.
1062          */
1063         rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_ON);
1064
1065         return 0;
1066 }
1067
1068 static void rt2500pci_disable_radio(struct rt2x00_dev *rt2x00dev)
1069 {
1070         u32 reg;
1071
1072         rt2x00pci_register_write(rt2x00dev, PWRCSR0, 0);
1073
1074         /*
1075          * Disable synchronisation.
1076          */
1077         rt2x00pci_register_write(rt2x00dev, CSR14, 0);
1078
1079         /*
1080          * Cancel RX and TX.
1081          */
1082         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1083         rt2x00_set_field32(&reg, TXCSR0_ABORT, 1);
1084         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1085
1086         /*
1087          * Disable interrupts.
1088          */
1089         rt2500pci_toggle_irq(rt2x00dev, STATE_RADIO_IRQ_OFF);
1090 }
1091
1092 static int rt2500pci_set_state(struct rt2x00_dev *rt2x00dev,
1093                                enum dev_state state)
1094 {
1095         u32 reg;
1096         unsigned int i;
1097         char put_to_sleep;
1098         char bbp_state;
1099         char rf_state;
1100
1101         put_to_sleep = (state != STATE_AWAKE);
1102
1103         rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1104         rt2x00_set_field32(&reg, PWRCSR1_SET_STATE, 1);
1105         rt2x00_set_field32(&reg, PWRCSR1_BBP_DESIRE_STATE, state);
1106         rt2x00_set_field32(&reg, PWRCSR1_RF_DESIRE_STATE, state);
1107         rt2x00_set_field32(&reg, PWRCSR1_PUT_TO_SLEEP, put_to_sleep);
1108         rt2x00pci_register_write(rt2x00dev, PWRCSR1, reg);
1109
1110         /*
1111          * Device is not guaranteed to be in the requested state yet.
1112          * We must wait until the register indicates that the
1113          * device has entered the correct state.
1114          */
1115         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1116                 rt2x00pci_register_read(rt2x00dev, PWRCSR1, &reg);
1117                 bbp_state = rt2x00_get_field32(reg, PWRCSR1_BBP_CURR_STATE);
1118                 rf_state = rt2x00_get_field32(reg, PWRCSR1_RF_CURR_STATE);
1119                 if (bbp_state == state && rf_state == state)
1120                         return 0;
1121                 msleep(10);
1122         }
1123
1124         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1125                "current device state: bbp %d and rf %d.\n",
1126                state, bbp_state, rf_state);
1127
1128         return -EBUSY;
1129 }
1130
1131 static int rt2500pci_set_device_state(struct rt2x00_dev *rt2x00dev,
1132                                       enum dev_state state)
1133 {
1134         int retval = 0;
1135
1136         switch (state) {
1137         case STATE_RADIO_ON:
1138                 retval = rt2500pci_enable_radio(rt2x00dev);
1139                 break;
1140         case STATE_RADIO_OFF:
1141                 rt2500pci_disable_radio(rt2x00dev);
1142                 break;
1143         case STATE_RADIO_RX_ON:
1144         case STATE_RADIO_RX_ON_LINK:
1145                 rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
1146                 break;
1147         case STATE_RADIO_RX_OFF:
1148         case STATE_RADIO_RX_OFF_LINK:
1149                 rt2500pci_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
1150                 break;
1151         case STATE_DEEP_SLEEP:
1152         case STATE_SLEEP:
1153         case STATE_STANDBY:
1154         case STATE_AWAKE:
1155                 retval = rt2500pci_set_state(rt2x00dev, state);
1156                 break;
1157         default:
1158                 retval = -ENOTSUPP;
1159                 break;
1160         }
1161
1162         return retval;
1163 }
1164
1165 /*
1166  * TX descriptor initialization
1167  */
1168 static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1169                                     struct sk_buff *skb,
1170                                     struct txentry_desc *txdesc,
1171                                     struct ieee80211_tx_control *control)
1172 {
1173         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1174         __le32 *txd = skbdesc->desc;
1175         u32 word;
1176
1177         /*
1178          * Start writing the descriptor words.
1179          */
1180         rt2x00_desc_read(txd, 2, &word);
1181         rt2x00_set_field32(&word, TXD_W2_IV_OFFSET, IEEE80211_HEADER);
1182         rt2x00_set_field32(&word, TXD_W2_AIFS, txdesc->aifs);
1183         rt2x00_set_field32(&word, TXD_W2_CWMIN, txdesc->cw_min);
1184         rt2x00_set_field32(&word, TXD_W2_CWMAX, txdesc->cw_max);
1185         rt2x00_desc_write(txd, 2, word);
1186
1187         rt2x00_desc_read(txd, 3, &word);
1188         rt2x00_set_field32(&word, TXD_W3_PLCP_SIGNAL, txdesc->signal);
1189         rt2x00_set_field32(&word, TXD_W3_PLCP_SERVICE, txdesc->service);
1190         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_LOW, txdesc->length_low);
1191         rt2x00_set_field32(&word, TXD_W3_PLCP_LENGTH_HIGH, txdesc->length_high);
1192         rt2x00_desc_write(txd, 3, word);
1193
1194         rt2x00_desc_read(txd, 10, &word);
1195         rt2x00_set_field32(&word, TXD_W10_RTS,
1196                            test_bit(ENTRY_TXD_RTS_FRAME, &txdesc->flags));
1197         rt2x00_desc_write(txd, 10, word);
1198
1199         rt2x00_desc_read(txd, 0, &word);
1200         rt2x00_set_field32(&word, TXD_W0_OWNER_NIC, 1);
1201         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1202         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1203                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1204         rt2x00_set_field32(&word, TXD_W0_ACK,
1205                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1206         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1207                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1208         rt2x00_set_field32(&word, TXD_W0_OFDM,
1209                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1210         rt2x00_set_field32(&word, TXD_W0_CIPHER_OWNER, 1);
1211         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1212         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1213                            !!(control->flags &
1214                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1215         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1216         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1217         rt2x00_desc_write(txd, 0, word);
1218 }
1219
1220 /*
1221  * TX data initialization
1222  */
1223 static void rt2500pci_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1224                                     const unsigned int queue)
1225 {
1226         u32 reg;
1227
1228         if (queue == RT2X00_BCN_QUEUE_BEACON) {
1229                 rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1230                 if (!rt2x00_get_field32(reg, CSR14_BEACON_GEN)) {
1231                         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 1);
1232                         rt2x00_set_field32(&reg, CSR14_TBCN, 1);
1233                         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 1);
1234                         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1235                 }
1236                 return;
1237         }
1238
1239         rt2x00pci_register_read(rt2x00dev, TXCSR0, &reg);
1240         rt2x00_set_field32(&reg, TXCSR0_KICK_PRIO,
1241                            (queue == IEEE80211_TX_QUEUE_DATA0));
1242         rt2x00_set_field32(&reg, TXCSR0_KICK_TX,
1243                            (queue == IEEE80211_TX_QUEUE_DATA1));
1244         rt2x00_set_field32(&reg, TXCSR0_KICK_ATIM,
1245                            (queue == RT2X00_BCN_QUEUE_ATIM));
1246         rt2x00pci_register_write(rt2x00dev, TXCSR0, reg);
1247 }
1248
1249 /*
1250  * RX control handlers
1251  */
1252 static void rt2500pci_fill_rxdone(struct queue_entry *entry,
1253                                   struct rxdone_entry_desc *rxdesc)
1254 {
1255         struct queue_entry_priv_pci_rx *priv_rx = entry->priv_data;
1256         u32 word0;
1257         u32 word2;
1258
1259         rt2x00_desc_read(priv_rx->desc, 0, &word0);
1260         rt2x00_desc_read(priv_rx->desc, 2, &word2);
1261
1262         rxdesc->flags = 0;
1263         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1264                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1265         if (rt2x00_get_field32(word0, RXD_W0_PHYSICAL_ERROR))
1266                 rxdesc->flags |= RX_FLAG_FAILED_PLCP_CRC;
1267
1268         /*
1269          * Obtain the status about this packet.
1270          * When frame was received with an OFDM bitrate,
1271          * the signal is the PLCP value. If it was received with
1272          * a CCK bitrate the signal is the rate in 100kbit/s.
1273          */
1274         rxdesc->signal = rt2x00_get_field32(word2, RXD_W2_SIGNAL);
1275         rxdesc->rssi = rt2x00_get_field32(word2, RXD_W2_RSSI) -
1276             entry->queue->rt2x00dev->rssi_offset;
1277         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1278
1279         rxdesc->dev_flags = 0;
1280         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1281                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1282         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1283                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1284 }
1285
1286 /*
1287  * Interrupt functions.
1288  */
1289 static void rt2500pci_txdone(struct rt2x00_dev *rt2x00dev,
1290                              const enum ieee80211_tx_queue queue_idx)
1291 {
1292         struct data_queue *queue = rt2x00queue_get_queue(rt2x00dev, queue_idx);
1293         struct queue_entry_priv_pci_tx *priv_tx;
1294         struct queue_entry *entry;
1295         struct txdone_entry_desc txdesc;
1296         u32 word;
1297
1298         while (!rt2x00queue_empty(queue)) {
1299                 entry = rt2x00queue_get_entry(queue, Q_INDEX_DONE);
1300                 priv_tx = entry->priv_data;
1301                 rt2x00_desc_read(priv_tx->desc, 0, &word);
1302
1303                 if (rt2x00_get_field32(word, TXD_W0_OWNER_NIC) ||
1304                     !rt2x00_get_field32(word, TXD_W0_VALID))
1305                         break;
1306
1307                 /*
1308                  * Obtain the status about this packet.
1309                  */
1310                 txdesc.status = rt2x00_get_field32(word, TXD_W0_RESULT);
1311                 txdesc.retry = rt2x00_get_field32(word, TXD_W0_RETRY_COUNT);
1312
1313                 rt2x00pci_txdone(rt2x00dev, entry, &txdesc);
1314         }
1315 }
1316
1317 static irqreturn_t rt2500pci_interrupt(int irq, void *dev_instance)
1318 {
1319         struct rt2x00_dev *rt2x00dev = dev_instance;
1320         u32 reg;
1321
1322         /*
1323          * Get the interrupt sources & saved to local variable.
1324          * Write register value back to clear pending interrupts.
1325          */
1326         rt2x00pci_register_read(rt2x00dev, CSR7, &reg);
1327         rt2x00pci_register_write(rt2x00dev, CSR7, reg);
1328
1329         if (!reg)
1330                 return IRQ_NONE;
1331
1332         if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
1333                 return IRQ_HANDLED;
1334
1335         /*
1336          * Handle interrupts, walk through all bits
1337          * and run the tasks, the bits are checked in order of
1338          * priority.
1339          */
1340
1341         /*
1342          * 1 - Beacon timer expired interrupt.
1343          */
1344         if (rt2x00_get_field32(reg, CSR7_TBCN_EXPIRE))
1345                 rt2x00lib_beacondone(rt2x00dev);
1346
1347         /*
1348          * 2 - Rx ring done interrupt.
1349          */
1350         if (rt2x00_get_field32(reg, CSR7_RXDONE))
1351                 rt2x00pci_rxdone(rt2x00dev);
1352
1353         /*
1354          * 3 - Atim ring transmit done interrupt.
1355          */
1356         if (rt2x00_get_field32(reg, CSR7_TXDONE_ATIMRING))
1357                 rt2500pci_txdone(rt2x00dev, RT2X00_BCN_QUEUE_ATIM);
1358
1359         /*
1360          * 4 - Priority ring transmit done interrupt.
1361          */
1362         if (rt2x00_get_field32(reg, CSR7_TXDONE_PRIORING))
1363                 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA0);
1364
1365         /*
1366          * 5 - Tx ring transmit done interrupt.
1367          */
1368         if (rt2x00_get_field32(reg, CSR7_TXDONE_TXRING))
1369                 rt2500pci_txdone(rt2x00dev, IEEE80211_TX_QUEUE_DATA1);
1370
1371         return IRQ_HANDLED;
1372 }
1373
1374 /*
1375  * Device probe functions.
1376  */
1377 static int rt2500pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1378 {
1379         struct eeprom_93cx6 eeprom;
1380         u32 reg;
1381         u16 word;
1382         u8 *mac;
1383
1384         rt2x00pci_register_read(rt2x00dev, CSR21, &reg);
1385
1386         eeprom.data = rt2x00dev;
1387         eeprom.register_read = rt2500pci_eepromregister_read;
1388         eeprom.register_write = rt2500pci_eepromregister_write;
1389         eeprom.width = rt2x00_get_field32(reg, CSR21_TYPE_93C46) ?
1390             PCI_EEPROM_WIDTH_93C46 : PCI_EEPROM_WIDTH_93C66;
1391         eeprom.reg_data_in = 0;
1392         eeprom.reg_data_out = 0;
1393         eeprom.reg_data_clock = 0;
1394         eeprom.reg_chip_select = 0;
1395
1396         eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom,
1397                                EEPROM_SIZE / sizeof(u16));
1398
1399         /*
1400          * Start validation of the data that has been read.
1401          */
1402         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1403         if (!is_valid_ether_addr(mac)) {
1404                 DECLARE_MAC_BUF(macbuf);
1405
1406                 random_ether_addr(mac);
1407                 EEPROM(rt2x00dev, "MAC: %s\n",
1408                        print_mac(macbuf, mac));
1409         }
1410
1411         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1412         if (word == 0xffff) {
1413                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1414                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1415                                    ANTENNA_SW_DIVERSITY);
1416                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1417                                    ANTENNA_SW_DIVERSITY);
1418                 rt2x00_set_field16(&word, EEPROM_ANTENNA_LED_MODE,
1419                                    LED_MODE_DEFAULT);
1420                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1421                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1422                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF2522);
1423                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1424                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1425         }
1426
1427         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1428         if (word == 0xffff) {
1429                 rt2x00_set_field16(&word, EEPROM_NIC_CARDBUS_ACCEL, 0);
1430                 rt2x00_set_field16(&word, EEPROM_NIC_DYN_BBP_TUNE, 0);
1431                 rt2x00_set_field16(&word, EEPROM_NIC_CCK_TX_POWER, 0);
1432                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1433                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1434         }
1435
1436         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &word);
1437         if (word == 0xffff) {
1438                 rt2x00_set_field16(&word, EEPROM_CALIBRATE_OFFSET_RSSI,
1439                                    DEFAULT_RSSI_OFFSET);
1440                 rt2x00_eeprom_write(rt2x00dev, EEPROM_CALIBRATE_OFFSET, word);
1441                 EEPROM(rt2x00dev, "Calibrate offset: 0x%04x\n", word);
1442         }
1443
1444         return 0;
1445 }
1446
1447 static int rt2500pci_init_eeprom(struct rt2x00_dev *rt2x00dev)
1448 {
1449         u32 reg;
1450         u16 value;
1451         u16 eeprom;
1452
1453         /*
1454          * Read EEPROM word for configuration.
1455          */
1456         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1457
1458         /*
1459          * Identify RF chipset.
1460          */
1461         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1462         rt2x00pci_register_read(rt2x00dev, CSR0, &reg);
1463         rt2x00_set_chip(rt2x00dev, RT2560, value, reg);
1464
1465         if (!rt2x00_rf(&rt2x00dev->chip, RF2522) &&
1466             !rt2x00_rf(&rt2x00dev->chip, RF2523) &&
1467             !rt2x00_rf(&rt2x00dev->chip, RF2524) &&
1468             !rt2x00_rf(&rt2x00dev->chip, RF2525) &&
1469             !rt2x00_rf(&rt2x00dev->chip, RF2525E) &&
1470             !rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1471                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1472                 return -ENODEV;
1473         }
1474
1475         /*
1476          * Identify default antenna configuration.
1477          */
1478         rt2x00dev->default_ant.tx =
1479             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1480         rt2x00dev->default_ant.rx =
1481             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1482
1483         /*
1484          * Store led mode, for correct led behaviour.
1485          */
1486 #ifdef CONFIG_RT2500PCI_LEDS
1487         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_LED_MODE);
1488
1489         rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
1490         rt2x00dev->led_radio.type = LED_TYPE_RADIO;
1491         rt2x00dev->led_radio.led_dev.brightness_set =
1492             rt2500pci_brightness_set;
1493         rt2x00dev->led_radio.led_dev.blink_set =
1494             rt2500pci_blink_set;
1495         rt2x00dev->led_radio.flags = LED_INITIALIZED;
1496
1497         if (value == LED_MODE_TXRX_ACTIVITY) {
1498                 rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
1499                 rt2x00dev->led_qual.type = LED_TYPE_ACTIVITY;
1500                 rt2x00dev->led_qual.led_dev.brightness_set =
1501                     rt2500pci_brightness_set;
1502                 rt2x00dev->led_qual.led_dev.blink_set =
1503                     rt2500pci_blink_set;
1504                 rt2x00dev->led_qual.flags = LED_INITIALIZED;
1505         }
1506 #endif /* CONFIG_RT2500PCI_LEDS */
1507
1508         /*
1509          * Detect if this device has an hardware controlled radio.
1510          */
1511 #ifdef CONFIG_RT2500PCI_RFKILL
1512         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_HARDWARE_RADIO))
1513                 __set_bit(CONFIG_SUPPORT_HW_BUTTON, &rt2x00dev->flags);
1514 #endif /* CONFIG_RT2500PCI_RFKILL */
1515
1516         /*
1517          * Check if the BBP tuning should be enabled.
1518          */
1519         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1520
1521         if (rt2x00_get_field16(eeprom, EEPROM_NIC_DYN_BBP_TUNE))
1522                 __set_bit(CONFIG_DISABLE_LINK_TUNING, &rt2x00dev->flags);
1523
1524         /*
1525          * Read the RSSI <-> dBm offset information.
1526          */
1527         rt2x00_eeprom_read(rt2x00dev, EEPROM_CALIBRATE_OFFSET, &eeprom);
1528         rt2x00dev->rssi_offset =
1529             rt2x00_get_field16(eeprom, EEPROM_CALIBRATE_OFFSET_RSSI);
1530
1531         return 0;
1532 }
1533
1534 /*
1535  * RF value list for RF2522
1536  * Supports: 2.4 GHz
1537  */
1538 static const struct rf_channel rf_vals_bg_2522[] = {
1539         { 1,  0x00002050, 0x000c1fda, 0x00000101, 0 },
1540         { 2,  0x00002050, 0x000c1fee, 0x00000101, 0 },
1541         { 3,  0x00002050, 0x000c2002, 0x00000101, 0 },
1542         { 4,  0x00002050, 0x000c2016, 0x00000101, 0 },
1543         { 5,  0x00002050, 0x000c202a, 0x00000101, 0 },
1544         { 6,  0x00002050, 0x000c203e, 0x00000101, 0 },
1545         { 7,  0x00002050, 0x000c2052, 0x00000101, 0 },
1546         { 8,  0x00002050, 0x000c2066, 0x00000101, 0 },
1547         { 9,  0x00002050, 0x000c207a, 0x00000101, 0 },
1548         { 10, 0x00002050, 0x000c208e, 0x00000101, 0 },
1549         { 11, 0x00002050, 0x000c20a2, 0x00000101, 0 },
1550         { 12, 0x00002050, 0x000c20b6, 0x00000101, 0 },
1551         { 13, 0x00002050, 0x000c20ca, 0x00000101, 0 },
1552         { 14, 0x00002050, 0x000c20fa, 0x00000101, 0 },
1553 };
1554
1555 /*
1556  * RF value list for RF2523
1557  * Supports: 2.4 GHz
1558  */
1559 static const struct rf_channel rf_vals_bg_2523[] = {
1560         { 1,  0x00022010, 0x00000c9e, 0x000e0111, 0x00000a1b },
1561         { 2,  0x00022010, 0x00000ca2, 0x000e0111, 0x00000a1b },
1562         { 3,  0x00022010, 0x00000ca6, 0x000e0111, 0x00000a1b },
1563         { 4,  0x00022010, 0x00000caa, 0x000e0111, 0x00000a1b },
1564         { 5,  0x00022010, 0x00000cae, 0x000e0111, 0x00000a1b },
1565         { 6,  0x00022010, 0x00000cb2, 0x000e0111, 0x00000a1b },
1566         { 7,  0x00022010, 0x00000cb6, 0x000e0111, 0x00000a1b },
1567         { 8,  0x00022010, 0x00000cba, 0x000e0111, 0x00000a1b },
1568         { 9,  0x00022010, 0x00000cbe, 0x000e0111, 0x00000a1b },
1569         { 10, 0x00022010, 0x00000d02, 0x000e0111, 0x00000a1b },
1570         { 11, 0x00022010, 0x00000d06, 0x000e0111, 0x00000a1b },
1571         { 12, 0x00022010, 0x00000d0a, 0x000e0111, 0x00000a1b },
1572         { 13, 0x00022010, 0x00000d0e, 0x000e0111, 0x00000a1b },
1573         { 14, 0x00022010, 0x00000d1a, 0x000e0111, 0x00000a03 },
1574 };
1575
1576 /*
1577  * RF value list for RF2524
1578  * Supports: 2.4 GHz
1579  */
1580 static const struct rf_channel rf_vals_bg_2524[] = {
1581         { 1,  0x00032020, 0x00000c9e, 0x00000101, 0x00000a1b },
1582         { 2,  0x00032020, 0x00000ca2, 0x00000101, 0x00000a1b },
1583         { 3,  0x00032020, 0x00000ca6, 0x00000101, 0x00000a1b },
1584         { 4,  0x00032020, 0x00000caa, 0x00000101, 0x00000a1b },
1585         { 5,  0x00032020, 0x00000cae, 0x00000101, 0x00000a1b },
1586         { 6,  0x00032020, 0x00000cb2, 0x00000101, 0x00000a1b },
1587         { 7,  0x00032020, 0x00000cb6, 0x00000101, 0x00000a1b },
1588         { 8,  0x00032020, 0x00000cba, 0x00000101, 0x00000a1b },
1589         { 9,  0x00032020, 0x00000cbe, 0x00000101, 0x00000a1b },
1590         { 10, 0x00032020, 0x00000d02, 0x00000101, 0x00000a1b },
1591         { 11, 0x00032020, 0x00000d06, 0x00000101, 0x00000a1b },
1592         { 12, 0x00032020, 0x00000d0a, 0x00000101, 0x00000a1b },
1593         { 13, 0x00032020, 0x00000d0e, 0x00000101, 0x00000a1b },
1594         { 14, 0x00032020, 0x00000d1a, 0x00000101, 0x00000a03 },
1595 };
1596
1597 /*
1598  * RF value list for RF2525
1599  * Supports: 2.4 GHz
1600  */
1601 static const struct rf_channel rf_vals_bg_2525[] = {
1602         { 1,  0x00022020, 0x00080c9e, 0x00060111, 0x00000a1b },
1603         { 2,  0x00022020, 0x00080ca2, 0x00060111, 0x00000a1b },
1604         { 3,  0x00022020, 0x00080ca6, 0x00060111, 0x00000a1b },
1605         { 4,  0x00022020, 0x00080caa, 0x00060111, 0x00000a1b },
1606         { 5,  0x00022020, 0x00080cae, 0x00060111, 0x00000a1b },
1607         { 6,  0x00022020, 0x00080cb2, 0x00060111, 0x00000a1b },
1608         { 7,  0x00022020, 0x00080cb6, 0x00060111, 0x00000a1b },
1609         { 8,  0x00022020, 0x00080cba, 0x00060111, 0x00000a1b },
1610         { 9,  0x00022020, 0x00080cbe, 0x00060111, 0x00000a1b },
1611         { 10, 0x00022020, 0x00080d02, 0x00060111, 0x00000a1b },
1612         { 11, 0x00022020, 0x00080d06, 0x00060111, 0x00000a1b },
1613         { 12, 0x00022020, 0x00080d0a, 0x00060111, 0x00000a1b },
1614         { 13, 0x00022020, 0x00080d0e, 0x00060111, 0x00000a1b },
1615         { 14, 0x00022020, 0x00080d1a, 0x00060111, 0x00000a03 },
1616 };
1617
1618 /*
1619  * RF value list for RF2525e
1620  * Supports: 2.4 GHz
1621  */
1622 static const struct rf_channel rf_vals_bg_2525e[] = {
1623         { 1,  0x00022020, 0x00081136, 0x00060111, 0x00000a0b },
1624         { 2,  0x00022020, 0x0008113a, 0x00060111, 0x00000a0b },
1625         { 3,  0x00022020, 0x0008113e, 0x00060111, 0x00000a0b },
1626         { 4,  0x00022020, 0x00081182, 0x00060111, 0x00000a0b },
1627         { 5,  0x00022020, 0x00081186, 0x00060111, 0x00000a0b },
1628         { 6,  0x00022020, 0x0008118a, 0x00060111, 0x00000a0b },
1629         { 7,  0x00022020, 0x0008118e, 0x00060111, 0x00000a0b },
1630         { 8,  0x00022020, 0x00081192, 0x00060111, 0x00000a0b },
1631         { 9,  0x00022020, 0x00081196, 0x00060111, 0x00000a0b },
1632         { 10, 0x00022020, 0x0008119a, 0x00060111, 0x00000a0b },
1633         { 11, 0x00022020, 0x0008119e, 0x00060111, 0x00000a0b },
1634         { 12, 0x00022020, 0x000811a2, 0x00060111, 0x00000a0b },
1635         { 13, 0x00022020, 0x000811a6, 0x00060111, 0x00000a0b },
1636         { 14, 0x00022020, 0x000811ae, 0x00060111, 0x00000a1b },
1637 };
1638
1639 /*
1640  * RF value list for RF5222
1641  * Supports: 2.4 GHz & 5.2 GHz
1642  */
1643 static const struct rf_channel rf_vals_5222[] = {
1644         { 1,  0x00022020, 0x00001136, 0x00000101, 0x00000a0b },
1645         { 2,  0x00022020, 0x0000113a, 0x00000101, 0x00000a0b },
1646         { 3,  0x00022020, 0x0000113e, 0x00000101, 0x00000a0b },
1647         { 4,  0x00022020, 0x00001182, 0x00000101, 0x00000a0b },
1648         { 5,  0x00022020, 0x00001186, 0x00000101, 0x00000a0b },
1649         { 6,  0x00022020, 0x0000118a, 0x00000101, 0x00000a0b },
1650         { 7,  0x00022020, 0x0000118e, 0x00000101, 0x00000a0b },
1651         { 8,  0x00022020, 0x00001192, 0x00000101, 0x00000a0b },
1652         { 9,  0x00022020, 0x00001196, 0x00000101, 0x00000a0b },
1653         { 10, 0x00022020, 0x0000119a, 0x00000101, 0x00000a0b },
1654         { 11, 0x00022020, 0x0000119e, 0x00000101, 0x00000a0b },
1655         { 12, 0x00022020, 0x000011a2, 0x00000101, 0x00000a0b },
1656         { 13, 0x00022020, 0x000011a6, 0x00000101, 0x00000a0b },
1657         { 14, 0x00022020, 0x000011ae, 0x00000101, 0x00000a1b },
1658
1659         /* 802.11 UNI / HyperLan 2 */
1660         { 36, 0x00022010, 0x00018896, 0x00000101, 0x00000a1f },
1661         { 40, 0x00022010, 0x0001889a, 0x00000101, 0x00000a1f },
1662         { 44, 0x00022010, 0x0001889e, 0x00000101, 0x00000a1f },
1663         { 48, 0x00022010, 0x000188a2, 0x00000101, 0x00000a1f },
1664         { 52, 0x00022010, 0x000188a6, 0x00000101, 0x00000a1f },
1665         { 66, 0x00022010, 0x000188aa, 0x00000101, 0x00000a1f },
1666         { 60, 0x00022010, 0x000188ae, 0x00000101, 0x00000a1f },
1667         { 64, 0x00022010, 0x000188b2, 0x00000101, 0x00000a1f },
1668
1669         /* 802.11 HyperLan 2 */
1670         { 100, 0x00022010, 0x00008802, 0x00000101, 0x00000a0f },
1671         { 104, 0x00022010, 0x00008806, 0x00000101, 0x00000a0f },
1672         { 108, 0x00022010, 0x0000880a, 0x00000101, 0x00000a0f },
1673         { 112, 0x00022010, 0x0000880e, 0x00000101, 0x00000a0f },
1674         { 116, 0x00022010, 0x00008812, 0x00000101, 0x00000a0f },
1675         { 120, 0x00022010, 0x00008816, 0x00000101, 0x00000a0f },
1676         { 124, 0x00022010, 0x0000881a, 0x00000101, 0x00000a0f },
1677         { 128, 0x00022010, 0x0000881e, 0x00000101, 0x00000a0f },
1678         { 132, 0x00022010, 0x00008822, 0x00000101, 0x00000a0f },
1679         { 136, 0x00022010, 0x00008826, 0x00000101, 0x00000a0f },
1680
1681         /* 802.11 UNII */
1682         { 140, 0x00022010, 0x0000882a, 0x00000101, 0x00000a0f },
1683         { 149, 0x00022020, 0x000090a6, 0x00000101, 0x00000a07 },
1684         { 153, 0x00022020, 0x000090ae, 0x00000101, 0x00000a07 },
1685         { 157, 0x00022020, 0x000090b6, 0x00000101, 0x00000a07 },
1686         { 161, 0x00022020, 0x000090be, 0x00000101, 0x00000a07 },
1687 };
1688
1689 static void rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1690 {
1691         struct hw_mode_spec *spec = &rt2x00dev->spec;
1692         u8 *txpower;
1693         unsigned int i;
1694
1695         /*
1696          * Initialize all hw fields.
1697          */
1698         rt2x00dev->hw->flags = IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1699         rt2x00dev->hw->extra_tx_headroom = 0;
1700         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1701         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1702         rt2x00dev->hw->queues = 2;
1703
1704         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_pci(rt2x00dev)->dev);
1705         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1706                                 rt2x00_eeprom_addr(rt2x00dev,
1707                                                    EEPROM_MAC_ADDR_0));
1708
1709         /*
1710          * Convert tx_power array in eeprom.
1711          */
1712         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_START);
1713         for (i = 0; i < 14; i++)
1714                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1715
1716         /*
1717          * Initialize hw_mode information.
1718          */
1719         spec->supported_bands = SUPPORT_BAND_2GHZ;
1720         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1721         spec->tx_power_a = NULL;
1722         spec->tx_power_bg = txpower;
1723         spec->tx_power_default = DEFAULT_TXPOWER;
1724
1725         if (rt2x00_rf(&rt2x00dev->chip, RF2522)) {
1726                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2522);
1727                 spec->channels = rf_vals_bg_2522;
1728         } else if (rt2x00_rf(&rt2x00dev->chip, RF2523)) {
1729                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2523);
1730                 spec->channels = rf_vals_bg_2523;
1731         } else if (rt2x00_rf(&rt2x00dev->chip, RF2524)) {
1732                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2524);
1733                 spec->channels = rf_vals_bg_2524;
1734         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525)) {
1735                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525);
1736                 spec->channels = rf_vals_bg_2525;
1737         } else if (rt2x00_rf(&rt2x00dev->chip, RF2525E)) {
1738                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2525e);
1739                 spec->channels = rf_vals_bg_2525e;
1740         } else if (rt2x00_rf(&rt2x00dev->chip, RF5222)) {
1741                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1742                 spec->num_channels = ARRAY_SIZE(rf_vals_5222);
1743                 spec->channels = rf_vals_5222;
1744         }
1745 }
1746
1747 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
1748 {
1749         int retval;
1750
1751         /*
1752          * Allocate eeprom data.
1753          */
1754         retval = rt2500pci_validate_eeprom(rt2x00dev);
1755         if (retval)
1756                 return retval;
1757
1758         retval = rt2500pci_init_eeprom(rt2x00dev);
1759         if (retval)
1760                 return retval;
1761
1762         /*
1763          * Initialize hw specifications.
1764          */
1765         rt2500pci_probe_hw_mode(rt2x00dev);
1766
1767         /*
1768          * This device requires the atim queue
1769          */
1770         __set_bit(DRIVER_REQUIRE_ATIM_QUEUE, &rt2x00dev->flags);
1771
1772         /*
1773          * Set the rssi offset.
1774          */
1775         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1776
1777         return 0;
1778 }
1779
1780 /*
1781  * IEEE80211 stack callback functions.
1782  */
1783 static int rt2500pci_set_retry_limit(struct ieee80211_hw *hw,
1784                                      u32 short_retry, u32 long_retry)
1785 {
1786         struct rt2x00_dev *rt2x00dev = hw->priv;
1787         u32 reg;
1788
1789         rt2x00pci_register_read(rt2x00dev, CSR11, &reg);
1790         rt2x00_set_field32(&reg, CSR11_LONG_RETRY, long_retry);
1791         rt2x00_set_field32(&reg, CSR11_SHORT_RETRY, short_retry);
1792         rt2x00pci_register_write(rt2x00dev, CSR11, reg);
1793
1794         return 0;
1795 }
1796
1797 static u64 rt2500pci_get_tsf(struct ieee80211_hw *hw)
1798 {
1799         struct rt2x00_dev *rt2x00dev = hw->priv;
1800         u64 tsf;
1801         u32 reg;
1802
1803         rt2x00pci_register_read(rt2x00dev, CSR17, &reg);
1804         tsf = (u64) rt2x00_get_field32(reg, CSR17_HIGH_TSFTIMER) << 32;
1805         rt2x00pci_register_read(rt2x00dev, CSR16, &reg);
1806         tsf |= rt2x00_get_field32(reg, CSR16_LOW_TSFTIMER);
1807
1808         return tsf;
1809 }
1810
1811 static int rt2500pci_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1812                                    struct ieee80211_tx_control *control)
1813 {
1814         struct rt2x00_dev *rt2x00dev = hw->priv;
1815         struct rt2x00_intf *intf = vif_to_intf(control->vif);
1816         struct queue_entry_priv_pci_tx *priv_tx;
1817         struct skb_frame_desc *skbdesc;
1818         u32 reg;
1819
1820         if (unlikely(!intf->beacon))
1821                 return -ENOBUFS;
1822
1823         priv_tx = intf->beacon->priv_data;
1824
1825         /*
1826          * Fill in skb descriptor
1827          */
1828         skbdesc = get_skb_frame_desc(skb);
1829         memset(skbdesc, 0, sizeof(*skbdesc));
1830         skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
1831         skbdesc->data = skb->data;
1832         skbdesc->data_len = skb->len;
1833         skbdesc->desc = priv_tx->desc;
1834         skbdesc->desc_len = intf->beacon->queue->desc_size;
1835         skbdesc->entry = intf->beacon;
1836
1837         /*
1838          * Disable beaconing while we are reloading the beacon data,
1839          * otherwise we might be sending out invalid data.
1840          */
1841         rt2x00pci_register_read(rt2x00dev, CSR14, &reg);
1842         rt2x00_set_field32(&reg, CSR14_TSF_COUNT, 0);
1843         rt2x00_set_field32(&reg, CSR14_TBCN, 0);
1844         rt2x00_set_field32(&reg, CSR14_BEACON_GEN, 0);
1845         rt2x00pci_register_write(rt2x00dev, CSR14, reg);
1846
1847         /*
1848          * mac80211 doesn't provide the control->queue variable
1849          * for beacons. Set our own queue identification so
1850          * it can be used during descriptor initialization.
1851          */
1852         control->queue = RT2X00_BCN_QUEUE_BEACON;
1853         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
1854
1855         /*
1856          * Enable beacon generation.
1857          * Write entire beacon with descriptor to register,
1858          * and kick the beacon generator.
1859          */
1860         memcpy(priv_tx->data, skb->data, skb->len);
1861         rt2x00dev->ops->lib->kick_tx_queue(rt2x00dev, control->queue);
1862
1863         return 0;
1864 }
1865
1866 static int rt2500pci_tx_last_beacon(struct ieee80211_hw *hw)
1867 {
1868         struct rt2x00_dev *rt2x00dev = hw->priv;
1869         u32 reg;
1870
1871         rt2x00pci_register_read(rt2x00dev, CSR15, &reg);
1872         return rt2x00_get_field32(reg, CSR15_BEACON_SENT);
1873 }
1874
1875 static const struct ieee80211_ops rt2500pci_mac80211_ops = {
1876         .tx                     = rt2x00mac_tx,
1877         .start                  = rt2x00mac_start,
1878         .stop                   = rt2x00mac_stop,
1879         .add_interface          = rt2x00mac_add_interface,
1880         .remove_interface       = rt2x00mac_remove_interface,
1881         .config                 = rt2x00mac_config,
1882         .config_interface       = rt2x00mac_config_interface,
1883         .configure_filter       = rt2x00mac_configure_filter,
1884         .get_stats              = rt2x00mac_get_stats,
1885         .set_retry_limit        = rt2500pci_set_retry_limit,
1886         .bss_info_changed       = rt2x00mac_bss_info_changed,
1887         .conf_tx                = rt2x00mac_conf_tx,
1888         .get_tx_stats           = rt2x00mac_get_tx_stats,
1889         .get_tsf                = rt2500pci_get_tsf,
1890         .beacon_update          = rt2500pci_beacon_update,
1891         .tx_last_beacon         = rt2500pci_tx_last_beacon,
1892 };
1893
1894 static const struct rt2x00lib_ops rt2500pci_rt2x00_ops = {
1895         .irq_handler            = rt2500pci_interrupt,
1896         .probe_hw               = rt2500pci_probe_hw,
1897         .initialize             = rt2x00pci_initialize,
1898         .uninitialize           = rt2x00pci_uninitialize,
1899         .init_rxentry           = rt2500pci_init_rxentry,
1900         .init_txentry           = rt2500pci_init_txentry,
1901         .set_device_state       = rt2500pci_set_device_state,
1902         .rfkill_poll            = rt2500pci_rfkill_poll,
1903         .link_stats             = rt2500pci_link_stats,
1904         .reset_tuner            = rt2500pci_reset_tuner,
1905         .link_tuner             = rt2500pci_link_tuner,
1906         .write_tx_desc          = rt2500pci_write_tx_desc,
1907         .write_tx_data          = rt2x00pci_write_tx_data,
1908         .kick_tx_queue          = rt2500pci_kick_tx_queue,
1909         .fill_rxdone            = rt2500pci_fill_rxdone,
1910         .config_filter          = rt2500pci_config_filter,
1911         .config_intf            = rt2500pci_config_intf,
1912         .config_erp             = rt2500pci_config_erp,
1913         .config                 = rt2500pci_config,
1914 };
1915
1916 static const struct data_queue_desc rt2500pci_queue_rx = {
1917         .entry_num              = RX_ENTRIES,
1918         .data_size              = DATA_FRAME_SIZE,
1919         .desc_size              = RXD_DESC_SIZE,
1920         .priv_size              = sizeof(struct queue_entry_priv_pci_rx),
1921 };
1922
1923 static const struct data_queue_desc rt2500pci_queue_tx = {
1924         .entry_num              = TX_ENTRIES,
1925         .data_size              = DATA_FRAME_SIZE,
1926         .desc_size              = TXD_DESC_SIZE,
1927         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1928 };
1929
1930 static const struct data_queue_desc rt2500pci_queue_bcn = {
1931         .entry_num              = BEACON_ENTRIES,
1932         .data_size              = MGMT_FRAME_SIZE,
1933         .desc_size              = TXD_DESC_SIZE,
1934         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1935 };
1936
1937 static const struct data_queue_desc rt2500pci_queue_atim = {
1938         .entry_num              = ATIM_ENTRIES,
1939         .data_size              = DATA_FRAME_SIZE,
1940         .desc_size              = TXD_DESC_SIZE,
1941         .priv_size              = sizeof(struct queue_entry_priv_pci_tx),
1942 };
1943
1944 static const struct rt2x00_ops rt2500pci_ops = {
1945         .name           = KBUILD_MODNAME,
1946         .max_sta_intf   = 1,
1947         .max_ap_intf    = 1,
1948         .eeprom_size    = EEPROM_SIZE,
1949         .rf_size        = RF_SIZE,
1950         .rx             = &rt2500pci_queue_rx,
1951         .tx             = &rt2500pci_queue_tx,
1952         .bcn            = &rt2500pci_queue_bcn,
1953         .atim           = &rt2500pci_queue_atim,
1954         .lib            = &rt2500pci_rt2x00_ops,
1955         .hw             = &rt2500pci_mac80211_ops,
1956 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
1957         .debugfs        = &rt2500pci_rt2x00debug,
1958 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
1959 };
1960
1961 /*
1962  * RT2500pci module information.
1963  */
1964 static struct pci_device_id rt2500pci_device_table[] = {
1965         { PCI_DEVICE(0x1814, 0x0201), PCI_DEVICE_DATA(&rt2500pci_ops) },
1966         { 0, }
1967 };
1968
1969 MODULE_AUTHOR(DRV_PROJECT);
1970 MODULE_VERSION(DRV_VERSION);
1971 MODULE_DESCRIPTION("Ralink RT2500 PCI & PCMCIA Wireless LAN driver.");
1972 MODULE_SUPPORTED_DEVICE("Ralink RT2560 PCI & PCMCIA chipset based cards");
1973 MODULE_DEVICE_TABLE(pci, rt2500pci_device_table);
1974 MODULE_LICENSE("GPL");
1975
1976 static struct pci_driver rt2500pci_driver = {
1977         .name           = KBUILD_MODNAME,
1978         .id_table       = rt2500pci_device_table,
1979         .probe          = rt2x00pci_probe,
1980         .remove         = __devexit_p(rt2x00pci_remove),
1981         .suspend        = rt2x00pci_suspend,
1982         .resume         = rt2x00pci_resume,
1983 };
1984
1985 static int __init rt2500pci_init(void)
1986 {
1987         return pci_register_driver(&rt2500pci_driver);
1988 }
1989
1990 static void __exit rt2500pci_exit(void)
1991 {
1992         pci_unregister_driver(&rt2500pci_driver);
1993 }
1994
1995 module_init(rt2500pci_init);
1996 module_exit(rt2500pci_exit);