Pull pvops into release branch
[linux-2.6] / drivers / net / wireless / rt2x00 / rt73usb.c
1 /*
2         Copyright (C) 2004 - 2008 rt2x00 SourceForge Project
3         <http://rt2x00.serialmonkey.com>
4
5         This program is free software; you can redistribute it and/or modify
6         it under the terms of the GNU General Public License as published by
7         the Free Software Foundation; either version 2 of the License, or
8         (at your option) any later version.
9
10         This program is distributed in the hope that it will be useful,
11         but WITHOUT ANY WARRANTY; without even the implied warranty of
12         MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13         GNU General Public License for more details.
14
15         You should have received a copy of the GNU General Public License
16         along with this program; if not, write to the
17         Free Software Foundation, Inc.,
18         59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19  */
20
21 /*
22         Module: rt73usb
23         Abstract: rt73usb device specific routines.
24         Supported chipsets: rt2571W & rt2671.
25  */
26
27 #include <linux/crc-itu-t.h>
28 #include <linux/delay.h>
29 #include <linux/etherdevice.h>
30 #include <linux/init.h>
31 #include <linux/kernel.h>
32 #include <linux/module.h>
33 #include <linux/usb.h>
34
35 #include "rt2x00.h"
36 #include "rt2x00usb.h"
37 #include "rt73usb.h"
38
39 /*
40  * Register access.
41  * All access to the CSR registers will go through the methods
42  * rt73usb_register_read and rt73usb_register_write.
43  * BBP and RF register require indirect register access,
44  * and use the CSR registers BBPCSR and RFCSR to achieve this.
45  * These indirect registers work with busy bits,
46  * and we will try maximal REGISTER_BUSY_COUNT times to access
47  * the register while taking a REGISTER_BUSY_DELAY us delay
48  * between each attampt. When the busy bit is still set at that time,
49  * the access attempt is considered to have failed,
50  * and we will print an error.
51  * The _lock versions must be used if you already hold the usb_cache_mutex
52  */
53 static inline void rt73usb_register_read(struct rt2x00_dev *rt2x00dev,
54                                          const unsigned int offset, u32 *value)
55 {
56         __le32 reg;
57         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
58                                       USB_VENDOR_REQUEST_IN, offset,
59                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
60         *value = le32_to_cpu(reg);
61 }
62
63 static inline void rt73usb_register_read_lock(struct rt2x00_dev *rt2x00dev,
64                                               const unsigned int offset, u32 *value)
65 {
66         __le32 reg;
67         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ,
68                                        USB_VENDOR_REQUEST_IN, offset,
69                                        &reg, sizeof(u32), REGISTER_TIMEOUT);
70         *value = le32_to_cpu(reg);
71 }
72
73 static inline void rt73usb_register_multiread(struct rt2x00_dev *rt2x00dev,
74                                               const unsigned int offset,
75                                               void *value, const u32 length)
76 {
77         int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
78         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ,
79                                       USB_VENDOR_REQUEST_IN, offset,
80                                       value, length, timeout);
81 }
82
83 static inline void rt73usb_register_write(struct rt2x00_dev *rt2x00dev,
84                                           const unsigned int offset, u32 value)
85 {
86         __le32 reg = cpu_to_le32(value);
87         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
88                                       USB_VENDOR_REQUEST_OUT, offset,
89                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
90 }
91
92 static inline void rt73usb_register_write_lock(struct rt2x00_dev *rt2x00dev,
93                                                const unsigned int offset, u32 value)
94 {
95         __le32 reg = cpu_to_le32(value);
96         rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE,
97                                        USB_VENDOR_REQUEST_OUT, offset,
98                                       &reg, sizeof(u32), REGISTER_TIMEOUT);
99 }
100
101 static inline void rt73usb_register_multiwrite(struct rt2x00_dev *rt2x00dev,
102                                                const unsigned int offset,
103                                                void *value, const u32 length)
104 {
105         int timeout = REGISTER_TIMEOUT * (length / sizeof(u32));
106         rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE,
107                                       USB_VENDOR_REQUEST_OUT, offset,
108                                       value, length, timeout);
109 }
110
111 static u32 rt73usb_bbp_check(struct rt2x00_dev *rt2x00dev)
112 {
113         u32 reg;
114         unsigned int i;
115
116         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
117                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR3, &reg);
118                 if (!rt2x00_get_field32(reg, PHY_CSR3_BUSY))
119                         break;
120                 udelay(REGISTER_BUSY_DELAY);
121         }
122
123         return reg;
124 }
125
126 static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev,
127                               const unsigned int word, const u8 value)
128 {
129         u32 reg;
130
131         mutex_lock(&rt2x00dev->usb_cache_mutex);
132
133         /*
134          * Wait until the BBP becomes ready.
135          */
136         reg = rt73usb_bbp_check(rt2x00dev);
137         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
138                 goto exit_fail;
139
140         /*
141          * Write the data into the BBP.
142          */
143         reg = 0;
144         rt2x00_set_field32(&reg, PHY_CSR3_VALUE, value);
145         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
146         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
147         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 0);
148
149         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
150         mutex_unlock(&rt2x00dev->usb_cache_mutex);
151
152         return;
153
154 exit_fail:
155         mutex_unlock(&rt2x00dev->usb_cache_mutex);
156
157         ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n");
158 }
159
160 static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev,
161                              const unsigned int word, u8 *value)
162 {
163         u32 reg;
164
165         mutex_lock(&rt2x00dev->usb_cache_mutex);
166
167         /*
168          * Wait until the BBP becomes ready.
169          */
170         reg = rt73usb_bbp_check(rt2x00dev);
171         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
172                 goto exit_fail;
173
174         /*
175          * Write the request into the BBP.
176          */
177         reg = 0;
178         rt2x00_set_field32(&reg, PHY_CSR3_REGNUM, word);
179         rt2x00_set_field32(&reg, PHY_CSR3_BUSY, 1);
180         rt2x00_set_field32(&reg, PHY_CSR3_READ_CONTROL, 1);
181
182         rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg);
183
184         /*
185          * Wait until the BBP becomes ready.
186          */
187         reg = rt73usb_bbp_check(rt2x00dev);
188         if (rt2x00_get_field32(reg, PHY_CSR3_BUSY))
189                 goto exit_fail;
190
191         *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE);
192         mutex_unlock(&rt2x00dev->usb_cache_mutex);
193
194         return;
195
196 exit_fail:
197         mutex_unlock(&rt2x00dev->usb_cache_mutex);
198
199         ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n");
200         *value = 0xff;
201 }
202
203 static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev,
204                              const unsigned int word, const u32 value)
205 {
206         u32 reg;
207         unsigned int i;
208
209         if (!word)
210                 return;
211
212         mutex_lock(&rt2x00dev->usb_cache_mutex);
213
214         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
215                 rt73usb_register_read_lock(rt2x00dev, PHY_CSR4, &reg);
216                 if (!rt2x00_get_field32(reg, PHY_CSR4_BUSY))
217                         goto rf_write;
218                 udelay(REGISTER_BUSY_DELAY);
219         }
220
221         mutex_unlock(&rt2x00dev->usb_cache_mutex);
222         ERROR(rt2x00dev, "PHY_CSR4 register busy. Write failed.\n");
223         return;
224
225 rf_write:
226         reg = 0;
227         rt2x00_set_field32(&reg, PHY_CSR4_VALUE, value);
228
229         /*
230          * RF5225 and RF2527 contain 21 bits per RF register value,
231          * all others contain 20 bits.
232          */
233         rt2x00_set_field32(&reg, PHY_CSR4_NUMBER_OF_BITS,
234                            20 + (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
235                                  rt2x00_rf(&rt2x00dev->chip, RF2527)));
236         rt2x00_set_field32(&reg, PHY_CSR4_IF_SELECT, 0);
237         rt2x00_set_field32(&reg, PHY_CSR4_BUSY, 1);
238
239         rt73usb_register_write_lock(rt2x00dev, PHY_CSR4, reg);
240         rt2x00_rf_write(rt2x00dev, word, value);
241         mutex_unlock(&rt2x00dev->usb_cache_mutex);
242 }
243
244 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
245 #define CSR_OFFSET(__word)      ( CSR_REG_BASE + ((__word) * sizeof(u32)) )
246
247 static void rt73usb_read_csr(struct rt2x00_dev *rt2x00dev,
248                              const unsigned int word, u32 *data)
249 {
250         rt73usb_register_read(rt2x00dev, CSR_OFFSET(word), data);
251 }
252
253 static void rt73usb_write_csr(struct rt2x00_dev *rt2x00dev,
254                               const unsigned int word, u32 data)
255 {
256         rt73usb_register_write(rt2x00dev, CSR_OFFSET(word), data);
257 }
258
259 static const struct rt2x00debug rt73usb_rt2x00debug = {
260         .owner  = THIS_MODULE,
261         .csr    = {
262                 .read           = rt73usb_read_csr,
263                 .write          = rt73usb_write_csr,
264                 .word_size      = sizeof(u32),
265                 .word_count     = CSR_REG_SIZE / sizeof(u32),
266         },
267         .eeprom = {
268                 .read           = rt2x00_eeprom_read,
269                 .write          = rt2x00_eeprom_write,
270                 .word_size      = sizeof(u16),
271                 .word_count     = EEPROM_SIZE / sizeof(u16),
272         },
273         .bbp    = {
274                 .read           = rt73usb_bbp_read,
275                 .write          = rt73usb_bbp_write,
276                 .word_size      = sizeof(u8),
277                 .word_count     = BBP_SIZE / sizeof(u8),
278         },
279         .rf     = {
280                 .read           = rt2x00_rf_read,
281                 .write          = rt73usb_rf_write,
282                 .word_size      = sizeof(u32),
283                 .word_count     = RF_SIZE / sizeof(u32),
284         },
285 };
286 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
287
288 #ifdef CONFIG_RT73USB_LEDS
289 static void rt73usb_brightness_set(struct led_classdev *led_cdev,
290                                    enum led_brightness brightness)
291 {
292         struct rt2x00_led *led =
293            container_of(led_cdev, struct rt2x00_led, led_dev);
294         unsigned int enabled = brightness != LED_OFF;
295         unsigned int a_mode =
296             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_5GHZ);
297         unsigned int bg_mode =
298             (enabled && led->rt2x00dev->curr_band == IEEE80211_BAND_2GHZ);
299
300         if (led->type == LED_TYPE_RADIO) {
301                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
302                                    MCU_LEDCS_RADIO_STATUS, enabled);
303
304                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
305                                             0, led->rt2x00dev->led_mcu_reg,
306                                             REGISTER_TIMEOUT);
307         } else if (led->type == LED_TYPE_ASSOC) {
308                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
309                                    MCU_LEDCS_LINK_BG_STATUS, bg_mode);
310                 rt2x00_set_field16(&led->rt2x00dev->led_mcu_reg,
311                                    MCU_LEDCS_LINK_A_STATUS, a_mode);
312
313                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
314                                             0, led->rt2x00dev->led_mcu_reg,
315                                             REGISTER_TIMEOUT);
316         } else if (led->type == LED_TYPE_QUALITY) {
317                 /*
318                  * The brightness is divided into 6 levels (0 - 5),
319                  * this means we need to convert the brightness
320                  * argument into the matching level within that range.
321                  */
322                 rt2x00usb_vendor_request_sw(led->rt2x00dev, USB_LED_CONTROL,
323                                             brightness / (LED_FULL / 6),
324                                             led->rt2x00dev->led_mcu_reg,
325                                             REGISTER_TIMEOUT);
326         }
327 }
328
329 static int rt73usb_blink_set(struct led_classdev *led_cdev,
330                              unsigned long *delay_on,
331                              unsigned long *delay_off)
332 {
333         struct rt2x00_led *led =
334             container_of(led_cdev, struct rt2x00_led, led_dev);
335         u32 reg;
336
337         rt73usb_register_read(led->rt2x00dev, MAC_CSR14, &reg);
338         rt2x00_set_field32(&reg, MAC_CSR14_ON_PERIOD, *delay_on);
339         rt2x00_set_field32(&reg, MAC_CSR14_OFF_PERIOD, *delay_off);
340         rt73usb_register_write(led->rt2x00dev, MAC_CSR14, reg);
341
342         return 0;
343 }
344 #endif /* CONFIG_RT73USB_LEDS */
345
346 /*
347  * Configuration handlers.
348  */
349 static void rt73usb_config_filter(struct rt2x00_dev *rt2x00dev,
350                                   const unsigned int filter_flags)
351 {
352         u32 reg;
353
354         /*
355          * Start configuration steps.
356          * Note that the version error will always be dropped
357          * and broadcast frames will always be accepted since
358          * there is no filter for it at this time.
359          */
360         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
361         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CRC,
362                            !(filter_flags & FIF_FCSFAIL));
363         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_PHYSICAL,
364                            !(filter_flags & FIF_PLCPFAIL));
365         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_CONTROL,
366                            !(filter_flags & FIF_CONTROL));
367         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_NOT_TO_ME,
368                            !(filter_flags & FIF_PROMISC_IN_BSS));
369         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_TO_DS,
370                            !(filter_flags & FIF_PROMISC_IN_BSS) &&
371                            !rt2x00dev->intf_ap_count);
372         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_VERSION_ERROR, 1);
373         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_MULTICAST,
374                            !(filter_flags & FIF_ALLMULTI));
375         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_BROADCAST, 0);
376         rt2x00_set_field32(&reg, TXRX_CSR0_DROP_ACK_CTS,
377                            !(filter_flags & FIF_CONTROL));
378         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
379 }
380
381 static void rt73usb_config_intf(struct rt2x00_dev *rt2x00dev,
382                                 struct rt2x00_intf *intf,
383                                 struct rt2x00intf_conf *conf,
384                                 const unsigned int flags)
385 {
386         unsigned int beacon_base;
387         u32 reg;
388
389         if (flags & CONFIG_UPDATE_TYPE) {
390                 /*
391                  * Clear current synchronisation setup.
392                  * For the Beacon base registers we only need to clear
393                  * the first byte since that byte contains the VALID and OWNER
394                  * bits which (when set to 0) will invalidate the entire beacon.
395                  */
396                 beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
397                 rt73usb_register_write(rt2x00dev, beacon_base, 0);
398
399                 /*
400                  * Enable synchronisation.
401                  */
402                 rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
403                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
404                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, conf->sync);
405                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
406                 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
407         }
408
409         if (flags & CONFIG_UPDATE_MAC) {
410                 reg = le32_to_cpu(conf->mac[1]);
411                 rt2x00_set_field32(&reg, MAC_CSR3_UNICAST_TO_ME_MASK, 0xff);
412                 conf->mac[1] = cpu_to_le32(reg);
413
414                 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR2,
415                                             conf->mac, sizeof(conf->mac));
416         }
417
418         if (flags & CONFIG_UPDATE_BSSID) {
419                 reg = le32_to_cpu(conf->bssid[1]);
420                 rt2x00_set_field32(&reg, MAC_CSR5_BSS_ID_MASK, 3);
421                 conf->bssid[1] = cpu_to_le32(reg);
422
423                 rt73usb_register_multiwrite(rt2x00dev, MAC_CSR4,
424                                             conf->bssid, sizeof(conf->bssid));
425         }
426 }
427
428 static void rt73usb_config_erp(struct rt2x00_dev *rt2x00dev,
429                                struct rt2x00lib_erp *erp)
430 {
431         u32 reg;
432
433         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
434         rt2x00_set_field32(&reg, TXRX_CSR0_RX_ACK_TIMEOUT, erp->ack_timeout);
435         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
436
437         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
438         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_PREAMBLE,
439                            !!erp->short_preamble);
440         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
441 }
442
443 static void rt73usb_config_phymode(struct rt2x00_dev *rt2x00dev,
444                                    const int basic_rate_mask)
445 {
446         rt73usb_register_write(rt2x00dev, TXRX_CSR5, basic_rate_mask);
447 }
448
449 static void rt73usb_config_channel(struct rt2x00_dev *rt2x00dev,
450                                    struct rf_channel *rf, const int txpower)
451 {
452         u8 r3;
453         u8 r94;
454         u8 smart;
455
456         rt2x00_set_field32(&rf->rf3, RF3_TXPOWER, TXPOWER_TO_DEV(txpower));
457         rt2x00_set_field32(&rf->rf4, RF4_FREQ_OFFSET, rt2x00dev->freq_offset);
458
459         smart = !(rt2x00_rf(&rt2x00dev->chip, RF5225) ||
460                   rt2x00_rf(&rt2x00dev->chip, RF2527));
461
462         rt73usb_bbp_read(rt2x00dev, 3, &r3);
463         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, smart);
464         rt73usb_bbp_write(rt2x00dev, 3, r3);
465
466         r94 = 6;
467         if (txpower > MAX_TXPOWER && txpower <= (MAX_TXPOWER + r94))
468                 r94 += txpower - MAX_TXPOWER;
469         else if (txpower < MIN_TXPOWER && txpower >= (MIN_TXPOWER - r94))
470                 r94 += txpower;
471         rt73usb_bbp_write(rt2x00dev, 94, r94);
472
473         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
474         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
475         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
476         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
477
478         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
479         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
480         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 | 0x00000004);
481         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
482
483         rt73usb_rf_write(rt2x00dev, 1, rf->rf1);
484         rt73usb_rf_write(rt2x00dev, 2, rf->rf2);
485         rt73usb_rf_write(rt2x00dev, 3, rf->rf3 & ~0x00000004);
486         rt73usb_rf_write(rt2x00dev, 4, rf->rf4);
487
488         udelay(10);
489 }
490
491 static void rt73usb_config_txpower(struct rt2x00_dev *rt2x00dev,
492                                    const int txpower)
493 {
494         struct rf_channel rf;
495
496         rt2x00_rf_read(rt2x00dev, 1, &rf.rf1);
497         rt2x00_rf_read(rt2x00dev, 2, &rf.rf2);
498         rt2x00_rf_read(rt2x00dev, 3, &rf.rf3);
499         rt2x00_rf_read(rt2x00dev, 4, &rf.rf4);
500
501         rt73usb_config_channel(rt2x00dev, &rf, txpower);
502 }
503
504 static void rt73usb_config_antenna_5x(struct rt2x00_dev *rt2x00dev,
505                                       struct antenna_setup *ant)
506 {
507         u8 r3;
508         u8 r4;
509         u8 r77;
510         u8 temp;
511
512         rt73usb_bbp_read(rt2x00dev, 3, &r3);
513         rt73usb_bbp_read(rt2x00dev, 4, &r4);
514         rt73usb_bbp_read(rt2x00dev, 77, &r77);
515
516         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
517
518         /*
519          * Configure the RX antenna.
520          */
521         switch (ant->rx) {
522         case ANTENNA_HW_DIVERSITY:
523                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
524                 temp = !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags)
525                        && (rt2x00dev->curr_band != IEEE80211_BAND_5GHZ);
526                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, temp);
527                 break;
528         case ANTENNA_A:
529                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
530                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
531                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
532                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
533                 else
534                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
535                 break;
536         case ANTENNA_B:
537         default:
538                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
539                 rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END, 0);
540                 if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ)
541                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
542                 else
543                         rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
544                 break;
545         }
546
547         rt73usb_bbp_write(rt2x00dev, 77, r77);
548         rt73usb_bbp_write(rt2x00dev, 3, r3);
549         rt73usb_bbp_write(rt2x00dev, 4, r4);
550 }
551
552 static void rt73usb_config_antenna_2x(struct rt2x00_dev *rt2x00dev,
553                                       struct antenna_setup *ant)
554 {
555         u8 r3;
556         u8 r4;
557         u8 r77;
558
559         rt73usb_bbp_read(rt2x00dev, 3, &r3);
560         rt73usb_bbp_read(rt2x00dev, 4, &r4);
561         rt73usb_bbp_read(rt2x00dev, 77, &r77);
562
563         rt2x00_set_field8(&r3, BBP_R3_SMART_MODE, 0);
564         rt2x00_set_field8(&r4, BBP_R4_RX_FRAME_END,
565                           !test_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags));
566
567         /*
568          * Configure the RX antenna.
569          */
570         switch (ant->rx) {
571         case ANTENNA_HW_DIVERSITY:
572                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 2);
573                 break;
574         case ANTENNA_A:
575                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 3);
576                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
577                 break;
578         case ANTENNA_B:
579         default:
580                 rt2x00_set_field8(&r77, BBP_R77_RX_ANTENNA, 0);
581                 rt2x00_set_field8(&r4, BBP_R4_RX_ANTENNA_CONTROL, 1);
582                 break;
583         }
584
585         rt73usb_bbp_write(rt2x00dev, 77, r77);
586         rt73usb_bbp_write(rt2x00dev, 3, r3);
587         rt73usb_bbp_write(rt2x00dev, 4, r4);
588 }
589
590 struct antenna_sel {
591         u8 word;
592         /*
593          * value[0] -> non-LNA
594          * value[1] -> LNA
595          */
596         u8 value[2];
597 };
598
599 static const struct antenna_sel antenna_sel_a[] = {
600         { 96,  { 0x58, 0x78 } },
601         { 104, { 0x38, 0x48 } },
602         { 75,  { 0xfe, 0x80 } },
603         { 86,  { 0xfe, 0x80 } },
604         { 88,  { 0xfe, 0x80 } },
605         { 35,  { 0x60, 0x60 } },
606         { 97,  { 0x58, 0x58 } },
607         { 98,  { 0x58, 0x58 } },
608 };
609
610 static const struct antenna_sel antenna_sel_bg[] = {
611         { 96,  { 0x48, 0x68 } },
612         { 104, { 0x2c, 0x3c } },
613         { 75,  { 0xfe, 0x80 } },
614         { 86,  { 0xfe, 0x80 } },
615         { 88,  { 0xfe, 0x80 } },
616         { 35,  { 0x50, 0x50 } },
617         { 97,  { 0x48, 0x48 } },
618         { 98,  { 0x48, 0x48 } },
619 };
620
621 static void rt73usb_config_antenna(struct rt2x00_dev *rt2x00dev,
622                                    struct antenna_setup *ant)
623 {
624         const struct antenna_sel *sel;
625         unsigned int lna;
626         unsigned int i;
627         u32 reg;
628
629         /*
630          * We should never come here because rt2x00lib is supposed
631          * to catch this and send us the correct antenna explicitely.
632          */
633         BUG_ON(ant->rx == ANTENNA_SW_DIVERSITY ||
634                ant->tx == ANTENNA_SW_DIVERSITY);
635
636         if (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ) {
637                 sel = antenna_sel_a;
638                 lna = test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
639         } else {
640                 sel = antenna_sel_bg;
641                 lna = test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
642         }
643
644         for (i = 0; i < ARRAY_SIZE(antenna_sel_a); i++)
645                 rt73usb_bbp_write(rt2x00dev, sel[i].word, sel[i].value[lna]);
646
647         rt73usb_register_read(rt2x00dev, PHY_CSR0, &reg);
648
649         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_BG,
650                            (rt2x00dev->curr_band == IEEE80211_BAND_2GHZ));
651         rt2x00_set_field32(&reg, PHY_CSR0_PA_PE_A,
652                            (rt2x00dev->curr_band == IEEE80211_BAND_5GHZ));
653
654         rt73usb_register_write(rt2x00dev, PHY_CSR0, reg);
655
656         if (rt2x00_rf(&rt2x00dev->chip, RF5226) ||
657             rt2x00_rf(&rt2x00dev->chip, RF5225))
658                 rt73usb_config_antenna_5x(rt2x00dev, ant);
659         else if (rt2x00_rf(&rt2x00dev->chip, RF2528) ||
660                  rt2x00_rf(&rt2x00dev->chip, RF2527))
661                 rt73usb_config_antenna_2x(rt2x00dev, ant);
662 }
663
664 static void rt73usb_config_duration(struct rt2x00_dev *rt2x00dev,
665                                     struct rt2x00lib_conf *libconf)
666 {
667         u32 reg;
668
669         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
670         rt2x00_set_field32(&reg, MAC_CSR9_SLOT_TIME, libconf->slot_time);
671         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
672
673         rt73usb_register_read(rt2x00dev, MAC_CSR8, &reg);
674         rt2x00_set_field32(&reg, MAC_CSR8_SIFS, libconf->sifs);
675         rt2x00_set_field32(&reg, MAC_CSR8_SIFS_AFTER_RX_OFDM, 3);
676         rt2x00_set_field32(&reg, MAC_CSR8_EIFS, libconf->eifs);
677         rt73usb_register_write(rt2x00dev, MAC_CSR8, reg);
678
679         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
680         rt2x00_set_field32(&reg, TXRX_CSR0_TSF_OFFSET, IEEE80211_HEADER);
681         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
682
683         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
684         rt2x00_set_field32(&reg, TXRX_CSR4_AUTORESPOND_ENABLE, 1);
685         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
686
687         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
688         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL,
689                            libconf->conf->beacon_int * 16);
690         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
691 }
692
693 static void rt73usb_config(struct rt2x00_dev *rt2x00dev,
694                            struct rt2x00lib_conf *libconf,
695                            const unsigned int flags)
696 {
697         if (flags & CONFIG_UPDATE_PHYMODE)
698                 rt73usb_config_phymode(rt2x00dev, libconf->basic_rates);
699         if (flags & CONFIG_UPDATE_CHANNEL)
700                 rt73usb_config_channel(rt2x00dev, &libconf->rf,
701                                        libconf->conf->power_level);
702         if ((flags & CONFIG_UPDATE_TXPOWER) && !(flags & CONFIG_UPDATE_CHANNEL))
703                 rt73usb_config_txpower(rt2x00dev, libconf->conf->power_level);
704         if (flags & CONFIG_UPDATE_ANTENNA)
705                 rt73usb_config_antenna(rt2x00dev, &libconf->ant);
706         if (flags & (CONFIG_UPDATE_SLOT_TIME | CONFIG_UPDATE_BEACON_INT))
707                 rt73usb_config_duration(rt2x00dev, libconf);
708 }
709
710 /*
711  * Link tuning
712  */
713 static void rt73usb_link_stats(struct rt2x00_dev *rt2x00dev,
714                                struct link_qual *qual)
715 {
716         u32 reg;
717
718         /*
719          * Update FCS error count from register.
720          */
721         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
722         qual->rx_failed = rt2x00_get_field32(reg, STA_CSR0_FCS_ERROR);
723
724         /*
725          * Update False CCA count from register.
726          */
727         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
728         qual->false_cca = rt2x00_get_field32(reg, STA_CSR1_FALSE_CCA_ERROR);
729 }
730
731 static void rt73usb_reset_tuner(struct rt2x00_dev *rt2x00dev)
732 {
733         rt73usb_bbp_write(rt2x00dev, 17, 0x20);
734         rt2x00dev->link.vgc_level = 0x20;
735 }
736
737 static void rt73usb_link_tuner(struct rt2x00_dev *rt2x00dev)
738 {
739         int rssi = rt2x00_get_link_rssi(&rt2x00dev->link);
740         u8 r17;
741         u8 up_bound;
742         u8 low_bound;
743
744         rt73usb_bbp_read(rt2x00dev, 17, &r17);
745
746         /*
747          * Determine r17 bounds.
748          */
749         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
750                 low_bound = 0x28;
751                 up_bound = 0x48;
752
753                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
754                         low_bound += 0x10;
755                         up_bound += 0x10;
756                 }
757         } else {
758                 if (rssi > -82) {
759                         low_bound = 0x1c;
760                         up_bound = 0x40;
761                 } else if (rssi > -84) {
762                         low_bound = 0x1c;
763                         up_bound = 0x20;
764                 } else {
765                         low_bound = 0x1c;
766                         up_bound = 0x1c;
767                 }
768
769                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags)) {
770                         low_bound += 0x14;
771                         up_bound += 0x10;
772                 }
773         }
774
775         /*
776          * If we are not associated, we should go straight to the
777          * dynamic CCA tuning.
778          */
779         if (!rt2x00dev->intf_associated)
780                 goto dynamic_cca_tune;
781
782         /*
783          * Special big-R17 for very short distance
784          */
785         if (rssi > -35) {
786                 if (r17 != 0x60)
787                         rt73usb_bbp_write(rt2x00dev, 17, 0x60);
788                 return;
789         }
790
791         /*
792          * Special big-R17 for short distance
793          */
794         if (rssi >= -58) {
795                 if (r17 != up_bound)
796                         rt73usb_bbp_write(rt2x00dev, 17, up_bound);
797                 return;
798         }
799
800         /*
801          * Special big-R17 for middle-short distance
802          */
803         if (rssi >= -66) {
804                 low_bound += 0x10;
805                 if (r17 != low_bound)
806                         rt73usb_bbp_write(rt2x00dev, 17, low_bound);
807                 return;
808         }
809
810         /*
811          * Special mid-R17 for middle distance
812          */
813         if (rssi >= -74) {
814                 if (r17 != (low_bound + 0x10))
815                         rt73usb_bbp_write(rt2x00dev, 17, low_bound + 0x08);
816                 return;
817         }
818
819         /*
820          * Special case: Change up_bound based on the rssi.
821          * Lower up_bound when rssi is weaker then -74 dBm.
822          */
823         up_bound -= 2 * (-74 - rssi);
824         if (low_bound > up_bound)
825                 up_bound = low_bound;
826
827         if (r17 > up_bound) {
828                 rt73usb_bbp_write(rt2x00dev, 17, up_bound);
829                 return;
830         }
831
832 dynamic_cca_tune:
833
834         /*
835          * r17 does not yet exceed upper limit, continue and base
836          * the r17 tuning on the false CCA count.
837          */
838         if (rt2x00dev->link.qual.false_cca > 512 && r17 < up_bound) {
839                 r17 += 4;
840                 if (r17 > up_bound)
841                         r17 = up_bound;
842                 rt73usb_bbp_write(rt2x00dev, 17, r17);
843         } else if (rt2x00dev->link.qual.false_cca < 100 && r17 > low_bound) {
844                 r17 -= 4;
845                 if (r17 < low_bound)
846                         r17 = low_bound;
847                 rt73usb_bbp_write(rt2x00dev, 17, r17);
848         }
849 }
850
851 /*
852  * Firmware functions
853  */
854 static char *rt73usb_get_firmware_name(struct rt2x00_dev *rt2x00dev)
855 {
856         return FIRMWARE_RT2571;
857 }
858
859 static u16 rt73usb_get_firmware_crc(const void *data, const size_t len)
860 {
861         u16 crc;
862
863         /*
864          * Use the crc itu-t algorithm.
865          * The last 2 bytes in the firmware array are the crc checksum itself,
866          * this means that we should never pass those 2 bytes to the crc
867          * algorithm.
868          */
869         crc = crc_itu_t(0, data, len - 2);
870         crc = crc_itu_t_byte(crc, 0);
871         crc = crc_itu_t_byte(crc, 0);
872
873         return crc;
874 }
875
876 static int rt73usb_load_firmware(struct rt2x00_dev *rt2x00dev, const void *data,
877                                  const size_t len)
878 {
879         unsigned int i;
880         int status;
881         u32 reg;
882         const char *ptr = data;
883         char *cache;
884         int buflen;
885         int timeout;
886
887         /*
888          * Wait for stable hardware.
889          */
890         for (i = 0; i < 100; i++) {
891                 rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
892                 if (reg)
893                         break;
894                 msleep(1);
895         }
896
897         if (!reg) {
898                 ERROR(rt2x00dev, "Unstable hardware.\n");
899                 return -EBUSY;
900         }
901
902         /*
903          * Write firmware to device.
904          * We setup a seperate cache for this action,
905          * since we are going to write larger chunks of data
906          * then normally used cache size.
907          */
908         cache = kmalloc(CSR_CACHE_SIZE_FIRMWARE, GFP_KERNEL);
909         if (!cache) {
910                 ERROR(rt2x00dev, "Failed to allocate firmware cache.\n");
911                 return -ENOMEM;
912         }
913
914         for (i = 0; i < len; i += CSR_CACHE_SIZE_FIRMWARE) {
915                 buflen = min_t(int, len - i, CSR_CACHE_SIZE_FIRMWARE);
916                 timeout = REGISTER_TIMEOUT * (buflen / sizeof(u32));
917
918                 memcpy(cache, ptr, buflen);
919
920                 rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
921                                          USB_VENDOR_REQUEST_OUT,
922                                          FIRMWARE_IMAGE_BASE + i, 0,
923                                          cache, buflen, timeout);
924
925                 ptr += buflen;
926         }
927
928         kfree(cache);
929
930         /*
931          * Send firmware request to device to load firmware,
932          * we need to specify a long timeout time.
933          */
934         status = rt2x00usb_vendor_request_sw(rt2x00dev, USB_DEVICE_MODE,
935                                              0, USB_MODE_FIRMWARE,
936                                              REGISTER_TIMEOUT_FIRMWARE);
937         if (status < 0) {
938                 ERROR(rt2x00dev, "Failed to write Firmware to device.\n");
939                 return status;
940         }
941
942         return 0;
943 }
944
945 /*
946  * Initialization functions.
947  */
948 static int rt73usb_init_registers(struct rt2x00_dev *rt2x00dev)
949 {
950         u32 reg;
951
952         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
953         rt2x00_set_field32(&reg, TXRX_CSR0_AUTO_TX_SEQ, 1);
954         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX, 0);
955         rt2x00_set_field32(&reg, TXRX_CSR0_TX_WITHOUT_WAITING, 0);
956         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
957
958         rt73usb_register_read(rt2x00dev, TXRX_CSR1, &reg);
959         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0, 47); /* CCK Signal */
960         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID0_VALID, 1);
961         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1, 30); /* Rssi */
962         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID1_VALID, 1);
963         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2, 42); /* OFDM Rate */
964         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID2_VALID, 1);
965         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3, 30); /* Rssi */
966         rt2x00_set_field32(&reg, TXRX_CSR1_BBP_ID3_VALID, 1);
967         rt73usb_register_write(rt2x00dev, TXRX_CSR1, reg);
968
969         /*
970          * CCK TXD BBP registers
971          */
972         rt73usb_register_read(rt2x00dev, TXRX_CSR2, &reg);
973         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0, 13);
974         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID0_VALID, 1);
975         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1, 12);
976         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID1_VALID, 1);
977         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2, 11);
978         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID2_VALID, 1);
979         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3, 10);
980         rt2x00_set_field32(&reg, TXRX_CSR2_BBP_ID3_VALID, 1);
981         rt73usb_register_write(rt2x00dev, TXRX_CSR2, reg);
982
983         /*
984          * OFDM TXD BBP registers
985          */
986         rt73usb_register_read(rt2x00dev, TXRX_CSR3, &reg);
987         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0, 7);
988         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID0_VALID, 1);
989         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1, 6);
990         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID1_VALID, 1);
991         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2, 5);
992         rt2x00_set_field32(&reg, TXRX_CSR3_BBP_ID2_VALID, 1);
993         rt73usb_register_write(rt2x00dev, TXRX_CSR3, reg);
994
995         rt73usb_register_read(rt2x00dev, TXRX_CSR7, &reg);
996         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_6MBS, 59);
997         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_9MBS, 53);
998         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_12MBS, 49);
999         rt2x00_set_field32(&reg, TXRX_CSR7_ACK_CTS_18MBS, 46);
1000         rt73usb_register_write(rt2x00dev, TXRX_CSR7, reg);
1001
1002         rt73usb_register_read(rt2x00dev, TXRX_CSR8, &reg);
1003         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_24MBS, 44);
1004         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_36MBS, 42);
1005         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_48MBS, 42);
1006         rt2x00_set_field32(&reg, TXRX_CSR8_ACK_CTS_54MBS, 42);
1007         rt73usb_register_write(rt2x00dev, TXRX_CSR8, reg);
1008
1009         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1010         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_INTERVAL, 0);
1011         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
1012         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_SYNC, 0);
1013         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
1014         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
1015         rt2x00_set_field32(&reg, TXRX_CSR9_TIMESTAMP_COMPENSATE, 0);
1016         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1017
1018         rt73usb_register_write(rt2x00dev, TXRX_CSR15, 0x0000000f);
1019
1020         rt73usb_register_read(rt2x00dev, MAC_CSR6, &reg);
1021         rt2x00_set_field32(&reg, MAC_CSR6_MAX_FRAME_UNIT, 0xfff);
1022         rt73usb_register_write(rt2x00dev, MAC_CSR6, reg);
1023
1024         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00000718);
1025
1026         if (rt2x00dev->ops->lib->set_device_state(rt2x00dev, STATE_AWAKE))
1027                 return -EBUSY;
1028
1029         rt73usb_register_write(rt2x00dev, MAC_CSR13, 0x00007f00);
1030
1031         /*
1032          * Invalidate all Shared Keys (SEC_CSR0),
1033          * and clear the Shared key Cipher algorithms (SEC_CSR1 & SEC_CSR5)
1034          */
1035         rt73usb_register_write(rt2x00dev, SEC_CSR0, 0x00000000);
1036         rt73usb_register_write(rt2x00dev, SEC_CSR1, 0x00000000);
1037         rt73usb_register_write(rt2x00dev, SEC_CSR5, 0x00000000);
1038
1039         reg = 0x000023b0;
1040         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1041             rt2x00_rf(&rt2x00dev->chip, RF2527))
1042                 rt2x00_set_field32(&reg, PHY_CSR1_RF_RPI, 1);
1043         rt73usb_register_write(rt2x00dev, PHY_CSR1, reg);
1044
1045         rt73usb_register_write(rt2x00dev, PHY_CSR5, 0x00040a06);
1046         rt73usb_register_write(rt2x00dev, PHY_CSR6, 0x00080606);
1047         rt73usb_register_write(rt2x00dev, PHY_CSR7, 0x00000408);
1048
1049         rt73usb_register_read(rt2x00dev, AC_TXOP_CSR0, &reg);
1050         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC0_TX_OP, 0);
1051         rt2x00_set_field32(&reg, AC_TXOP_CSR0_AC1_TX_OP, 0);
1052         rt73usb_register_write(rt2x00dev, AC_TXOP_CSR0, reg);
1053
1054         rt73usb_register_read(rt2x00dev, AC_TXOP_CSR1, &reg);
1055         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC2_TX_OP, 192);
1056         rt2x00_set_field32(&reg, AC_TXOP_CSR1_AC3_TX_OP, 48);
1057         rt73usb_register_write(rt2x00dev, AC_TXOP_CSR1, reg);
1058
1059         rt73usb_register_read(rt2x00dev, MAC_CSR9, &reg);
1060         rt2x00_set_field32(&reg, MAC_CSR9_CW_SELECT, 0);
1061         rt73usb_register_write(rt2x00dev, MAC_CSR9, reg);
1062
1063         /*
1064          * Clear all beacons
1065          * For the Beacon base registers we only need to clear
1066          * the first byte since that byte contains the VALID and OWNER
1067          * bits which (when set to 0) will invalidate the entire beacon.
1068          */
1069         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE0, 0);
1070         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE1, 0);
1071         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE2, 0);
1072         rt73usb_register_write(rt2x00dev, HW_BEACON_BASE3, 0);
1073
1074         /*
1075          * We must clear the error counters.
1076          * These registers are cleared on read,
1077          * so we may pass a useless variable to store the value.
1078          */
1079         rt73usb_register_read(rt2x00dev, STA_CSR0, &reg);
1080         rt73usb_register_read(rt2x00dev, STA_CSR1, &reg);
1081         rt73usb_register_read(rt2x00dev, STA_CSR2, &reg);
1082
1083         /*
1084          * Reset MAC and BBP registers.
1085          */
1086         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1087         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 1);
1088         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 1);
1089         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1090
1091         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1092         rt2x00_set_field32(&reg, MAC_CSR1_SOFT_RESET, 0);
1093         rt2x00_set_field32(&reg, MAC_CSR1_BBP_RESET, 0);
1094         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1095
1096         rt73usb_register_read(rt2x00dev, MAC_CSR1, &reg);
1097         rt2x00_set_field32(&reg, MAC_CSR1_HOST_READY, 1);
1098         rt73usb_register_write(rt2x00dev, MAC_CSR1, reg);
1099
1100         return 0;
1101 }
1102
1103 static int rt73usb_init_bbp(struct rt2x00_dev *rt2x00dev)
1104 {
1105         unsigned int i;
1106         u16 eeprom;
1107         u8 reg_id;
1108         u8 value;
1109
1110         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1111                 rt73usb_bbp_read(rt2x00dev, 0, &value);
1112                 if ((value != 0xff) && (value != 0x00))
1113                         goto continue_csr_init;
1114                 NOTICE(rt2x00dev, "Waiting for BBP register.\n");
1115                 udelay(REGISTER_BUSY_DELAY);
1116         }
1117
1118         ERROR(rt2x00dev, "BBP register access failed, aborting.\n");
1119         return -EACCES;
1120
1121 continue_csr_init:
1122         rt73usb_bbp_write(rt2x00dev, 3, 0x80);
1123         rt73usb_bbp_write(rt2x00dev, 15, 0x30);
1124         rt73usb_bbp_write(rt2x00dev, 21, 0xc8);
1125         rt73usb_bbp_write(rt2x00dev, 22, 0x38);
1126         rt73usb_bbp_write(rt2x00dev, 23, 0x06);
1127         rt73usb_bbp_write(rt2x00dev, 24, 0xfe);
1128         rt73usb_bbp_write(rt2x00dev, 25, 0x0a);
1129         rt73usb_bbp_write(rt2x00dev, 26, 0x0d);
1130         rt73usb_bbp_write(rt2x00dev, 32, 0x0b);
1131         rt73usb_bbp_write(rt2x00dev, 34, 0x12);
1132         rt73usb_bbp_write(rt2x00dev, 37, 0x07);
1133         rt73usb_bbp_write(rt2x00dev, 39, 0xf8);
1134         rt73usb_bbp_write(rt2x00dev, 41, 0x60);
1135         rt73usb_bbp_write(rt2x00dev, 53, 0x10);
1136         rt73usb_bbp_write(rt2x00dev, 54, 0x18);
1137         rt73usb_bbp_write(rt2x00dev, 60, 0x10);
1138         rt73usb_bbp_write(rt2x00dev, 61, 0x04);
1139         rt73usb_bbp_write(rt2x00dev, 62, 0x04);
1140         rt73usb_bbp_write(rt2x00dev, 75, 0xfe);
1141         rt73usb_bbp_write(rt2x00dev, 86, 0xfe);
1142         rt73usb_bbp_write(rt2x00dev, 88, 0xfe);
1143         rt73usb_bbp_write(rt2x00dev, 90, 0x0f);
1144         rt73usb_bbp_write(rt2x00dev, 99, 0x00);
1145         rt73usb_bbp_write(rt2x00dev, 102, 0x16);
1146         rt73usb_bbp_write(rt2x00dev, 107, 0x04);
1147
1148         for (i = 0; i < EEPROM_BBP_SIZE; i++) {
1149                 rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom);
1150
1151                 if (eeprom != 0xffff && eeprom != 0x0000) {
1152                         reg_id = rt2x00_get_field16(eeprom, EEPROM_BBP_REG_ID);
1153                         value = rt2x00_get_field16(eeprom, EEPROM_BBP_VALUE);
1154                         rt73usb_bbp_write(rt2x00dev, reg_id, value);
1155                 }
1156         }
1157
1158         return 0;
1159 }
1160
1161 /*
1162  * Device state switch handlers.
1163  */
1164 static void rt73usb_toggle_rx(struct rt2x00_dev *rt2x00dev,
1165                               enum dev_state state)
1166 {
1167         u32 reg;
1168
1169         rt73usb_register_read(rt2x00dev, TXRX_CSR0, &reg);
1170         rt2x00_set_field32(&reg, TXRX_CSR0_DISABLE_RX,
1171                            state == STATE_RADIO_RX_OFF);
1172         rt73usb_register_write(rt2x00dev, TXRX_CSR0, reg);
1173 }
1174
1175 static int rt73usb_enable_radio(struct rt2x00_dev *rt2x00dev)
1176 {
1177         /*
1178          * Initialize all registers.
1179          */
1180         if (rt73usb_init_registers(rt2x00dev) ||
1181             rt73usb_init_bbp(rt2x00dev)) {
1182                 ERROR(rt2x00dev, "Register initialization failed.\n");
1183                 return -EIO;
1184         }
1185
1186         return 0;
1187 }
1188
1189 static void rt73usb_disable_radio(struct rt2x00_dev *rt2x00dev)
1190 {
1191         rt73usb_register_write(rt2x00dev, MAC_CSR10, 0x00001818);
1192
1193         /*
1194          * Disable synchronisation.
1195          */
1196         rt73usb_register_write(rt2x00dev, TXRX_CSR9, 0);
1197
1198         rt2x00usb_disable_radio(rt2x00dev);
1199 }
1200
1201 static int rt73usb_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state)
1202 {
1203         u32 reg;
1204         unsigned int i;
1205         char put_to_sleep;
1206         char current_state;
1207
1208         put_to_sleep = (state != STATE_AWAKE);
1209
1210         rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1211         rt2x00_set_field32(&reg, MAC_CSR12_FORCE_WAKEUP, !put_to_sleep);
1212         rt2x00_set_field32(&reg, MAC_CSR12_PUT_TO_SLEEP, put_to_sleep);
1213         rt73usb_register_write(rt2x00dev, MAC_CSR12, reg);
1214
1215         /*
1216          * Device is not guaranteed to be in the requested state yet.
1217          * We must wait until the register indicates that the
1218          * device has entered the correct state.
1219          */
1220         for (i = 0; i < REGISTER_BUSY_COUNT; i++) {
1221                 rt73usb_register_read(rt2x00dev, MAC_CSR12, &reg);
1222                 current_state =
1223                     rt2x00_get_field32(reg, MAC_CSR12_BBP_CURRENT_STATE);
1224                 if (current_state == !put_to_sleep)
1225                         return 0;
1226                 msleep(10);
1227         }
1228
1229         NOTICE(rt2x00dev, "Device failed to enter state %d, "
1230                "current device state %d.\n", !put_to_sleep, current_state);
1231
1232         return -EBUSY;
1233 }
1234
1235 static int rt73usb_set_device_state(struct rt2x00_dev *rt2x00dev,
1236                                     enum dev_state state)
1237 {
1238         int retval = 0;
1239
1240         switch (state) {
1241         case STATE_RADIO_ON:
1242                 retval = rt73usb_enable_radio(rt2x00dev);
1243                 break;
1244         case STATE_RADIO_OFF:
1245                 rt73usb_disable_radio(rt2x00dev);
1246                 break;
1247         case STATE_RADIO_RX_ON:
1248         case STATE_RADIO_RX_ON_LINK:
1249                 rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
1250                 break;
1251         case STATE_RADIO_RX_OFF:
1252         case STATE_RADIO_RX_OFF_LINK:
1253                 rt73usb_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
1254                 break;
1255         case STATE_DEEP_SLEEP:
1256         case STATE_SLEEP:
1257         case STATE_STANDBY:
1258         case STATE_AWAKE:
1259                 retval = rt73usb_set_state(rt2x00dev, state);
1260                 break;
1261         default:
1262                 retval = -ENOTSUPP;
1263                 break;
1264         }
1265
1266         return retval;
1267 }
1268
1269 /*
1270  * TX descriptor initialization
1271  */
1272 static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev,
1273                                     struct sk_buff *skb,
1274                                     struct txentry_desc *txdesc,
1275                                     struct ieee80211_tx_control *control)
1276 {
1277         struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb);
1278         __le32 *txd = skbdesc->desc;
1279         u32 word;
1280
1281         /*
1282          * Start writing the descriptor words.
1283          */
1284         rt2x00_desc_read(txd, 1, &word);
1285         rt2x00_set_field32(&word, TXD_W1_HOST_Q_ID, txdesc->queue);
1286         rt2x00_set_field32(&word, TXD_W1_AIFSN, txdesc->aifs);
1287         rt2x00_set_field32(&word, TXD_W1_CWMIN, txdesc->cw_min);
1288         rt2x00_set_field32(&word, TXD_W1_CWMAX, txdesc->cw_max);
1289         rt2x00_set_field32(&word, TXD_W1_IV_OFFSET, IEEE80211_HEADER);
1290         rt2x00_set_field32(&word, TXD_W1_HW_SEQUENCE, 1);
1291         rt2x00_desc_write(txd, 1, word);
1292
1293         rt2x00_desc_read(txd, 2, &word);
1294         rt2x00_set_field32(&word, TXD_W2_PLCP_SIGNAL, txdesc->signal);
1295         rt2x00_set_field32(&word, TXD_W2_PLCP_SERVICE, txdesc->service);
1296         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_LOW, txdesc->length_low);
1297         rt2x00_set_field32(&word, TXD_W2_PLCP_LENGTH_HIGH, txdesc->length_high);
1298         rt2x00_desc_write(txd, 2, word);
1299
1300         rt2x00_desc_read(txd, 5, &word);
1301         rt2x00_set_field32(&word, TXD_W5_TX_POWER,
1302                            TXPOWER_TO_DEV(rt2x00dev->tx_power));
1303         rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1);
1304         rt2x00_desc_write(txd, 5, word);
1305
1306         rt2x00_desc_read(txd, 0, &word);
1307         rt2x00_set_field32(&word, TXD_W0_BURST,
1308                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1309         rt2x00_set_field32(&word, TXD_W0_VALID, 1);
1310         rt2x00_set_field32(&word, TXD_W0_MORE_FRAG,
1311                            test_bit(ENTRY_TXD_MORE_FRAG, &txdesc->flags));
1312         rt2x00_set_field32(&word, TXD_W0_ACK,
1313                            test_bit(ENTRY_TXD_ACK, &txdesc->flags));
1314         rt2x00_set_field32(&word, TXD_W0_TIMESTAMP,
1315                            test_bit(ENTRY_TXD_REQ_TIMESTAMP, &txdesc->flags));
1316         rt2x00_set_field32(&word, TXD_W0_OFDM,
1317                            test_bit(ENTRY_TXD_OFDM_RATE, &txdesc->flags));
1318         rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs);
1319         rt2x00_set_field32(&word, TXD_W0_RETRY_MODE,
1320                            !!(control->flags &
1321                               IEEE80211_TXCTL_LONG_RETRY_LIMIT));
1322         rt2x00_set_field32(&word, TXD_W0_TKIP_MIC, 0);
1323         rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skbdesc->data_len);
1324         rt2x00_set_field32(&word, TXD_W0_BURST2,
1325                            test_bit(ENTRY_TXD_BURST, &txdesc->flags));
1326         rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE);
1327         rt2x00_desc_write(txd, 0, word);
1328 }
1329
1330 static int rt73usb_get_tx_data_len(struct rt2x00_dev *rt2x00dev,
1331                                    struct sk_buff *skb)
1332 {
1333         int length;
1334
1335         /*
1336          * The length _must_ be a multiple of 4,
1337          * but it must _not_ be a multiple of the USB packet size.
1338          */
1339         length = roundup(skb->len, 4);
1340         length += (4 * !(length % rt2x00dev->usb_maxpacket));
1341
1342         return length;
1343 }
1344
1345 /*
1346  * TX data initialization
1347  */
1348 static void rt73usb_kick_tx_queue(struct rt2x00_dev *rt2x00dev,
1349                                   const unsigned int queue)
1350 {
1351         u32 reg;
1352
1353         if (queue != RT2X00_BCN_QUEUE_BEACON)
1354                 return;
1355
1356         /*
1357          * For Wi-Fi faily generated beacons between participating stations.
1358          * Set TBTT phase adaptive adjustment step to 8us (default 16us)
1359          */
1360         rt73usb_register_write(rt2x00dev, TXRX_CSR10, 0x00001008);
1361
1362         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
1363         if (!rt2x00_get_field32(reg, TXRX_CSR9_BEACON_GEN)) {
1364                 rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 1);
1365                 rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 1);
1366                 rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 1);
1367                 rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
1368         }
1369 }
1370
1371 /*
1372  * RX control handlers
1373  */
1374 static int rt73usb_agc_to_rssi(struct rt2x00_dev *rt2x00dev, int rxd_w1)
1375 {
1376         u16 eeprom;
1377         u8 offset;
1378         u8 lna;
1379
1380         lna = rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_LNA);
1381         switch (lna) {
1382         case 3:
1383                 offset = 90;
1384                 break;
1385         case 2:
1386                 offset = 74;
1387                 break;
1388         case 1:
1389                 offset = 64;
1390                 break;
1391         default:
1392                 return 0;
1393         }
1394
1395         if (rt2x00dev->rx_status.band == IEEE80211_BAND_5GHZ) {
1396                 if (test_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags)) {
1397                         if (lna == 3 || lna == 2)
1398                                 offset += 10;
1399                 } else {
1400                         if (lna == 3)
1401                                 offset += 6;
1402                         else if (lna == 2)
1403                                 offset += 8;
1404                 }
1405
1406                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &eeprom);
1407                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_A_1);
1408         } else {
1409                 if (test_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags))
1410                         offset += 14;
1411
1412                 rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &eeprom);
1413                 offset -= rt2x00_get_field16(eeprom, EEPROM_RSSI_OFFSET_BG_1);
1414         }
1415
1416         return rt2x00_get_field32(rxd_w1, RXD_W1_RSSI_AGC) * 2 - offset;
1417 }
1418
1419 static void rt73usb_fill_rxdone(struct queue_entry *entry,
1420                                 struct rxdone_entry_desc *rxdesc)
1421 {
1422         struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb);
1423         __le32 *rxd = (__le32 *)entry->skb->data;
1424         unsigned int offset = entry->queue->desc_size + 2;
1425         u32 word0;
1426         u32 word1;
1427
1428         /*
1429          * Copy descriptor to the available headroom inside the skbuffer.
1430          */
1431         skb_push(entry->skb, offset);
1432         memcpy(entry->skb->data, rxd, entry->queue->desc_size);
1433         rxd = (__le32 *)entry->skb->data;
1434
1435         /*
1436          * The descriptor is now aligned to 4 bytes and thus it is
1437          * now safe to read it on all architectures.
1438          */
1439         rt2x00_desc_read(rxd, 0, &word0);
1440         rt2x00_desc_read(rxd, 1, &word1);
1441
1442         rxdesc->flags = 0;
1443         if (rt2x00_get_field32(word0, RXD_W0_CRC_ERROR))
1444                 rxdesc->flags |= RX_FLAG_FAILED_FCS_CRC;
1445
1446         /*
1447          * Obtain the status about this packet.
1448          * When frame was received with an OFDM bitrate,
1449          * the signal is the PLCP value. If it was received with
1450          * a CCK bitrate the signal is the rate in 100kbit/s.
1451          */
1452         rxdesc->signal = rt2x00_get_field32(word1, RXD_W1_SIGNAL);
1453         rxdesc->rssi = rt73usb_agc_to_rssi(entry->queue->rt2x00dev, word1);
1454         rxdesc->size = rt2x00_get_field32(word0, RXD_W0_DATABYTE_COUNT);
1455
1456         rxdesc->dev_flags = 0;
1457         if (rt2x00_get_field32(word0, RXD_W0_OFDM))
1458                 rxdesc->dev_flags |= RXDONE_SIGNAL_PLCP;
1459         if (rt2x00_get_field32(word0, RXD_W0_MY_BSS))
1460                 rxdesc->dev_flags |= RXDONE_MY_BSS;
1461
1462         /*
1463          * Adjust the skb memory window to the frame boundaries.
1464          */
1465         skb_pull(entry->skb, offset + entry->queue->desc_size);
1466         skb_trim(entry->skb, rxdesc->size);
1467
1468         /*
1469          * Set descriptor and data pointer.
1470          */
1471         skbdesc->data = entry->skb->data;
1472         skbdesc->data_len = rxdesc->size;
1473         skbdesc->desc = rxd;
1474         skbdesc->desc_len = entry->queue->desc_size;
1475 }
1476
1477 /*
1478  * Device probe functions.
1479  */
1480 static int rt73usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
1481 {
1482         u16 word;
1483         u8 *mac;
1484         s8 value;
1485
1486         rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom, EEPROM_SIZE);
1487
1488         /*
1489          * Start validation of the data that has been read.
1490          */
1491         mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
1492         if (!is_valid_ether_addr(mac)) {
1493                 DECLARE_MAC_BUF(macbuf);
1494
1495                 random_ether_addr(mac);
1496                 EEPROM(rt2x00dev, "MAC: %s\n", print_mac(macbuf, mac));
1497         }
1498
1499         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &word);
1500         if (word == 0xffff) {
1501                 rt2x00_set_field16(&word, EEPROM_ANTENNA_NUM, 2);
1502                 rt2x00_set_field16(&word, EEPROM_ANTENNA_TX_DEFAULT,
1503                                    ANTENNA_B);
1504                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RX_DEFAULT,
1505                                    ANTENNA_B);
1506                 rt2x00_set_field16(&word, EEPROM_ANTENNA_FRAME_TYPE, 0);
1507                 rt2x00_set_field16(&word, EEPROM_ANTENNA_DYN_TXAGC, 0);
1508                 rt2x00_set_field16(&word, EEPROM_ANTENNA_HARDWARE_RADIO, 0);
1509                 rt2x00_set_field16(&word, EEPROM_ANTENNA_RF_TYPE, RF5226);
1510                 rt2x00_eeprom_write(rt2x00dev, EEPROM_ANTENNA, word);
1511                 EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word);
1512         }
1513
1514         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &word);
1515         if (word == 0xffff) {
1516                 rt2x00_set_field16(&word, EEPROM_NIC_EXTERNAL_LNA, 0);
1517                 rt2x00_eeprom_write(rt2x00dev, EEPROM_NIC, word);
1518                 EEPROM(rt2x00dev, "NIC: 0x%04x\n", word);
1519         }
1520
1521         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &word);
1522         if (word == 0xffff) {
1523                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_G, 0);
1524                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_RDY_A, 0);
1525                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_ACT, 0);
1526                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_0, 0);
1527                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_1, 0);
1528                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_2, 0);
1529                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_3, 0);
1530                 rt2x00_set_field16(&word, EEPROM_LED_POLARITY_GPIO_4, 0);
1531                 rt2x00_set_field16(&word, EEPROM_LED_LED_MODE,
1532                                    LED_MODE_DEFAULT);
1533                 rt2x00_eeprom_write(rt2x00dev, EEPROM_LED, word);
1534                 EEPROM(rt2x00dev, "Led: 0x%04x\n", word);
1535         }
1536
1537         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &word);
1538         if (word == 0xffff) {
1539                 rt2x00_set_field16(&word, EEPROM_FREQ_OFFSET, 0);
1540                 rt2x00_set_field16(&word, EEPROM_FREQ_SEQ, 0);
1541                 rt2x00_eeprom_write(rt2x00dev, EEPROM_FREQ, word);
1542                 EEPROM(rt2x00dev, "Freq: 0x%04x\n", word);
1543         }
1544
1545         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_BG, &word);
1546         if (word == 0xffff) {
1547                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1548                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1549                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1550                 EEPROM(rt2x00dev, "RSSI OFFSET BG: 0x%04x\n", word);
1551         } else {
1552                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_1);
1553                 if (value < -10 || value > 10)
1554                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_1, 0);
1555                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_BG_2);
1556                 if (value < -10 || value > 10)
1557                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_BG_2, 0);
1558                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_BG, word);
1559         }
1560
1561         rt2x00_eeprom_read(rt2x00dev, EEPROM_RSSI_OFFSET_A, &word);
1562         if (word == 0xffff) {
1563                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1564                 rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1565                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1566                 EEPROM(rt2x00dev, "RSSI OFFSET A: 0x%04x\n", word);
1567         } else {
1568                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_1);
1569                 if (value < -10 || value > 10)
1570                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_1, 0);
1571                 value = rt2x00_get_field16(word, EEPROM_RSSI_OFFSET_A_2);
1572                 if (value < -10 || value > 10)
1573                         rt2x00_set_field16(&word, EEPROM_RSSI_OFFSET_A_2, 0);
1574                 rt2x00_eeprom_write(rt2x00dev, EEPROM_RSSI_OFFSET_A, word);
1575         }
1576
1577         return 0;
1578 }
1579
1580 static int rt73usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
1581 {
1582         u32 reg;
1583         u16 value;
1584         u16 eeprom;
1585
1586         /*
1587          * Read EEPROM word for configuration.
1588          */
1589         rt2x00_eeprom_read(rt2x00dev, EEPROM_ANTENNA, &eeprom);
1590
1591         /*
1592          * Identify RF chipset.
1593          */
1594         value = rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RF_TYPE);
1595         rt73usb_register_read(rt2x00dev, MAC_CSR0, &reg);
1596         rt2x00_set_chip(rt2x00dev, RT2571, value, reg);
1597
1598         if (!rt2x00_check_rev(&rt2x00dev->chip, 0x25730)) {
1599                 ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
1600                 return -ENODEV;
1601         }
1602
1603         if (!rt2x00_rf(&rt2x00dev->chip, RF5226) &&
1604             !rt2x00_rf(&rt2x00dev->chip, RF2528) &&
1605             !rt2x00_rf(&rt2x00dev->chip, RF5225) &&
1606             !rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1607                 ERROR(rt2x00dev, "Invalid RF chipset detected.\n");
1608                 return -ENODEV;
1609         }
1610
1611         /*
1612          * Identify default antenna configuration.
1613          */
1614         rt2x00dev->default_ant.tx =
1615             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_TX_DEFAULT);
1616         rt2x00dev->default_ant.rx =
1617             rt2x00_get_field16(eeprom, EEPROM_ANTENNA_RX_DEFAULT);
1618
1619         /*
1620          * Read the Frame type.
1621          */
1622         if (rt2x00_get_field16(eeprom, EEPROM_ANTENNA_FRAME_TYPE))
1623                 __set_bit(CONFIG_FRAME_TYPE, &rt2x00dev->flags);
1624
1625         /*
1626          * Read frequency offset.
1627          */
1628         rt2x00_eeprom_read(rt2x00dev, EEPROM_FREQ, &eeprom);
1629         rt2x00dev->freq_offset = rt2x00_get_field16(eeprom, EEPROM_FREQ_OFFSET);
1630
1631         /*
1632          * Read external LNA informations.
1633          */
1634         rt2x00_eeprom_read(rt2x00dev, EEPROM_NIC, &eeprom);
1635
1636         if (rt2x00_get_field16(eeprom, EEPROM_NIC_EXTERNAL_LNA)) {
1637                 __set_bit(CONFIG_EXTERNAL_LNA_A, &rt2x00dev->flags);
1638                 __set_bit(CONFIG_EXTERNAL_LNA_BG, &rt2x00dev->flags);
1639         }
1640
1641         /*
1642          * Store led settings, for correct led behaviour.
1643          */
1644 #ifdef CONFIG_RT73USB_LEDS
1645         rt2x00_eeprom_read(rt2x00dev, EEPROM_LED, &eeprom);
1646
1647         rt2x00dev->led_radio.rt2x00dev = rt2x00dev;
1648         rt2x00dev->led_radio.type = LED_TYPE_RADIO;
1649         rt2x00dev->led_radio.led_dev.brightness_set =
1650             rt73usb_brightness_set;
1651         rt2x00dev->led_radio.led_dev.blink_set =
1652             rt73usb_blink_set;
1653         rt2x00dev->led_radio.flags = LED_INITIALIZED;
1654
1655         rt2x00dev->led_assoc.rt2x00dev = rt2x00dev;
1656         rt2x00dev->led_assoc.type = LED_TYPE_ASSOC;
1657         rt2x00dev->led_assoc.led_dev.brightness_set =
1658             rt73usb_brightness_set;
1659         rt2x00dev->led_assoc.led_dev.blink_set =
1660             rt73usb_blink_set;
1661         rt2x00dev->led_assoc.flags = LED_INITIALIZED;
1662
1663         if (value == LED_MODE_SIGNAL_STRENGTH) {
1664                 rt2x00dev->led_qual.rt2x00dev = rt2x00dev;
1665                 rt2x00dev->led_qual.type = LED_TYPE_QUALITY;
1666                 rt2x00dev->led_qual.led_dev.brightness_set =
1667                     rt73usb_brightness_set;
1668                 rt2x00dev->led_qual.led_dev.blink_set =
1669                     rt73usb_blink_set;
1670                 rt2x00dev->led_qual.flags = LED_INITIALIZED;
1671         }
1672
1673         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_LED_MODE, value);
1674         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_0,
1675                            rt2x00_get_field16(eeprom,
1676                                               EEPROM_LED_POLARITY_GPIO_0));
1677         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_1,
1678                            rt2x00_get_field16(eeprom,
1679                                               EEPROM_LED_POLARITY_GPIO_1));
1680         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_2,
1681                            rt2x00_get_field16(eeprom,
1682                                               EEPROM_LED_POLARITY_GPIO_2));
1683         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_3,
1684                            rt2x00_get_field16(eeprom,
1685                                               EEPROM_LED_POLARITY_GPIO_3));
1686         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_GPIO_4,
1687                            rt2x00_get_field16(eeprom,
1688                                               EEPROM_LED_POLARITY_GPIO_4));
1689         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_ACT,
1690                            rt2x00_get_field16(eeprom, EEPROM_LED_POLARITY_ACT));
1691         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_BG,
1692                            rt2x00_get_field16(eeprom,
1693                                               EEPROM_LED_POLARITY_RDY_G));
1694         rt2x00_set_field16(&rt2x00dev->led_mcu_reg, MCU_LEDCS_POLARITY_READY_A,
1695                            rt2x00_get_field16(eeprom,
1696                                               EEPROM_LED_POLARITY_RDY_A));
1697 #endif /* CONFIG_RT73USB_LEDS */
1698
1699         return 0;
1700 }
1701
1702 /*
1703  * RF value list for RF2528
1704  * Supports: 2.4 GHz
1705  */
1706 static const struct rf_channel rf_vals_bg_2528[] = {
1707         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1708         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1709         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1710         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1711         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1712         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1713         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1714         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1715         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1716         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1717         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1718         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1719         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1720         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1721 };
1722
1723 /*
1724  * RF value list for RF5226
1725  * Supports: 2.4 GHz & 5.2 GHz
1726  */
1727 static const struct rf_channel rf_vals_5226[] = {
1728         { 1,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea0b },
1729         { 2,  0x00002c0c, 0x00000786, 0x00068255, 0x000fea1f },
1730         { 3,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea0b },
1731         { 4,  0x00002c0c, 0x0000078a, 0x00068255, 0x000fea1f },
1732         { 5,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea0b },
1733         { 6,  0x00002c0c, 0x0000078e, 0x00068255, 0x000fea1f },
1734         { 7,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea0b },
1735         { 8,  0x00002c0c, 0x00000792, 0x00068255, 0x000fea1f },
1736         { 9,  0x00002c0c, 0x00000796, 0x00068255, 0x000fea0b },
1737         { 10, 0x00002c0c, 0x00000796, 0x00068255, 0x000fea1f },
1738         { 11, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea0b },
1739         { 12, 0x00002c0c, 0x0000079a, 0x00068255, 0x000fea1f },
1740         { 13, 0x00002c0c, 0x0000079e, 0x00068255, 0x000fea0b },
1741         { 14, 0x00002c0c, 0x000007a2, 0x00068255, 0x000fea13 },
1742
1743         /* 802.11 UNI / HyperLan 2 */
1744         { 36, 0x00002c0c, 0x0000099a, 0x00098255, 0x000fea23 },
1745         { 40, 0x00002c0c, 0x000009a2, 0x00098255, 0x000fea03 },
1746         { 44, 0x00002c0c, 0x000009a6, 0x00098255, 0x000fea0b },
1747         { 48, 0x00002c0c, 0x000009aa, 0x00098255, 0x000fea13 },
1748         { 52, 0x00002c0c, 0x000009ae, 0x00098255, 0x000fea1b },
1749         { 56, 0x00002c0c, 0x000009b2, 0x00098255, 0x000fea23 },
1750         { 60, 0x00002c0c, 0x000009ba, 0x00098255, 0x000fea03 },
1751         { 64, 0x00002c0c, 0x000009be, 0x00098255, 0x000fea0b },
1752
1753         /* 802.11 HyperLan 2 */
1754         { 100, 0x00002c0c, 0x00000a2a, 0x000b8255, 0x000fea03 },
1755         { 104, 0x00002c0c, 0x00000a2e, 0x000b8255, 0x000fea0b },
1756         { 108, 0x00002c0c, 0x00000a32, 0x000b8255, 0x000fea13 },
1757         { 112, 0x00002c0c, 0x00000a36, 0x000b8255, 0x000fea1b },
1758         { 116, 0x00002c0c, 0x00000a3a, 0x000b8255, 0x000fea23 },
1759         { 120, 0x00002c0c, 0x00000a82, 0x000b8255, 0x000fea03 },
1760         { 124, 0x00002c0c, 0x00000a86, 0x000b8255, 0x000fea0b },
1761         { 128, 0x00002c0c, 0x00000a8a, 0x000b8255, 0x000fea13 },
1762         { 132, 0x00002c0c, 0x00000a8e, 0x000b8255, 0x000fea1b },
1763         { 136, 0x00002c0c, 0x00000a92, 0x000b8255, 0x000fea23 },
1764
1765         /* 802.11 UNII */
1766         { 140, 0x00002c0c, 0x00000a9a, 0x000b8255, 0x000fea03 },
1767         { 149, 0x00002c0c, 0x00000aa2, 0x000b8255, 0x000fea1f },
1768         { 153, 0x00002c0c, 0x00000aa6, 0x000b8255, 0x000fea27 },
1769         { 157, 0x00002c0c, 0x00000aae, 0x000b8255, 0x000fea07 },
1770         { 161, 0x00002c0c, 0x00000ab2, 0x000b8255, 0x000fea0f },
1771         { 165, 0x00002c0c, 0x00000ab6, 0x000b8255, 0x000fea17 },
1772
1773         /* MMAC(Japan)J52 ch 34,38,42,46 */
1774         { 34, 0x00002c0c, 0x0008099a, 0x000da255, 0x000d3a0b },
1775         { 38, 0x00002c0c, 0x0008099e, 0x000da255, 0x000d3a13 },
1776         { 42, 0x00002c0c, 0x000809a2, 0x000da255, 0x000d3a1b },
1777         { 46, 0x00002c0c, 0x000809a6, 0x000da255, 0x000d3a23 },
1778 };
1779
1780 /*
1781  * RF value list for RF5225 & RF2527
1782  * Supports: 2.4 GHz & 5.2 GHz
1783  */
1784 static const struct rf_channel rf_vals_5225_2527[] = {
1785         { 1,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa0b },
1786         { 2,  0x00002ccc, 0x00004786, 0x00068455, 0x000ffa1f },
1787         { 3,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa0b },
1788         { 4,  0x00002ccc, 0x0000478a, 0x00068455, 0x000ffa1f },
1789         { 5,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa0b },
1790         { 6,  0x00002ccc, 0x0000478e, 0x00068455, 0x000ffa1f },
1791         { 7,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa0b },
1792         { 8,  0x00002ccc, 0x00004792, 0x00068455, 0x000ffa1f },
1793         { 9,  0x00002ccc, 0x00004796, 0x00068455, 0x000ffa0b },
1794         { 10, 0x00002ccc, 0x00004796, 0x00068455, 0x000ffa1f },
1795         { 11, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa0b },
1796         { 12, 0x00002ccc, 0x0000479a, 0x00068455, 0x000ffa1f },
1797         { 13, 0x00002ccc, 0x0000479e, 0x00068455, 0x000ffa0b },
1798         { 14, 0x00002ccc, 0x000047a2, 0x00068455, 0x000ffa13 },
1799
1800         /* 802.11 UNI / HyperLan 2 */
1801         { 36, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa23 },
1802         { 40, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa03 },
1803         { 44, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa0b },
1804         { 48, 0x00002ccc, 0x000049aa, 0x0009be55, 0x000ffa13 },
1805         { 52, 0x00002ccc, 0x000049ae, 0x0009ae55, 0x000ffa1b },
1806         { 56, 0x00002ccc, 0x000049b2, 0x0009ae55, 0x000ffa23 },
1807         { 60, 0x00002ccc, 0x000049ba, 0x0009ae55, 0x000ffa03 },
1808         { 64, 0x00002ccc, 0x000049be, 0x0009ae55, 0x000ffa0b },
1809
1810         /* 802.11 HyperLan 2 */
1811         { 100, 0x00002ccc, 0x00004a2a, 0x000bae55, 0x000ffa03 },
1812         { 104, 0x00002ccc, 0x00004a2e, 0x000bae55, 0x000ffa0b },
1813         { 108, 0x00002ccc, 0x00004a32, 0x000bae55, 0x000ffa13 },
1814         { 112, 0x00002ccc, 0x00004a36, 0x000bae55, 0x000ffa1b },
1815         { 116, 0x00002ccc, 0x00004a3a, 0x000bbe55, 0x000ffa23 },
1816         { 120, 0x00002ccc, 0x00004a82, 0x000bbe55, 0x000ffa03 },
1817         { 124, 0x00002ccc, 0x00004a86, 0x000bbe55, 0x000ffa0b },
1818         { 128, 0x00002ccc, 0x00004a8a, 0x000bbe55, 0x000ffa13 },
1819         { 132, 0x00002ccc, 0x00004a8e, 0x000bbe55, 0x000ffa1b },
1820         { 136, 0x00002ccc, 0x00004a92, 0x000bbe55, 0x000ffa23 },
1821
1822         /* 802.11 UNII */
1823         { 140, 0x00002ccc, 0x00004a9a, 0x000bbe55, 0x000ffa03 },
1824         { 149, 0x00002ccc, 0x00004aa2, 0x000bbe55, 0x000ffa1f },
1825         { 153, 0x00002ccc, 0x00004aa6, 0x000bbe55, 0x000ffa27 },
1826         { 157, 0x00002ccc, 0x00004aae, 0x000bbe55, 0x000ffa07 },
1827         { 161, 0x00002ccc, 0x00004ab2, 0x000bbe55, 0x000ffa0f },
1828         { 165, 0x00002ccc, 0x00004ab6, 0x000bbe55, 0x000ffa17 },
1829
1830         /* MMAC(Japan)J52 ch 34,38,42,46 */
1831         { 34, 0x00002ccc, 0x0000499a, 0x0009be55, 0x000ffa0b },
1832         { 38, 0x00002ccc, 0x0000499e, 0x0009be55, 0x000ffa13 },
1833         { 42, 0x00002ccc, 0x000049a2, 0x0009be55, 0x000ffa1b },
1834         { 46, 0x00002ccc, 0x000049a6, 0x0009be55, 0x000ffa23 },
1835 };
1836
1837
1838 static void rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
1839 {
1840         struct hw_mode_spec *spec = &rt2x00dev->spec;
1841         u8 *txpower;
1842         unsigned int i;
1843
1844         /*
1845          * Initialize all hw fields.
1846          */
1847         rt2x00dev->hw->flags =
1848             IEEE80211_HW_HOST_GEN_BEACON_TEMPLATE |
1849             IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING;
1850         rt2x00dev->hw->extra_tx_headroom = TXD_DESC_SIZE;
1851         rt2x00dev->hw->max_signal = MAX_SIGNAL;
1852         rt2x00dev->hw->max_rssi = MAX_RX_SSI;
1853         rt2x00dev->hw->queues = 4;
1854
1855         SET_IEEE80211_DEV(rt2x00dev->hw, &rt2x00dev_usb(rt2x00dev)->dev);
1856         SET_IEEE80211_PERM_ADDR(rt2x00dev->hw,
1857                                 rt2x00_eeprom_addr(rt2x00dev,
1858                                                    EEPROM_MAC_ADDR_0));
1859
1860         /*
1861          * Convert tx_power array in eeprom.
1862          */
1863         txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_G_START);
1864         for (i = 0; i < 14; i++)
1865                 txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1866
1867         /*
1868          * Initialize hw_mode information.
1869          */
1870         spec->supported_bands = SUPPORT_BAND_2GHZ;
1871         spec->supported_rates = SUPPORT_RATE_CCK | SUPPORT_RATE_OFDM;
1872         spec->tx_power_a = NULL;
1873         spec->tx_power_bg = txpower;
1874         spec->tx_power_default = DEFAULT_TXPOWER;
1875
1876         if (rt2x00_rf(&rt2x00dev->chip, RF2528)) {
1877                 spec->num_channels = ARRAY_SIZE(rf_vals_bg_2528);
1878                 spec->channels = rf_vals_bg_2528;
1879         } else if (rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1880                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1881                 spec->num_channels = ARRAY_SIZE(rf_vals_5226);
1882                 spec->channels = rf_vals_5226;
1883         } else if (rt2x00_rf(&rt2x00dev->chip, RF2527)) {
1884                 spec->num_channels = 14;
1885                 spec->channels = rf_vals_5225_2527;
1886         } else if (rt2x00_rf(&rt2x00dev->chip, RF5225)) {
1887                 spec->supported_bands |= SUPPORT_BAND_5GHZ;
1888                 spec->num_channels = ARRAY_SIZE(rf_vals_5225_2527);
1889                 spec->channels = rf_vals_5225_2527;
1890         }
1891
1892         if (rt2x00_rf(&rt2x00dev->chip, RF5225) ||
1893             rt2x00_rf(&rt2x00dev->chip, RF5226)) {
1894                 txpower = rt2x00_eeprom_addr(rt2x00dev, EEPROM_TXPOWER_A_START);
1895                 for (i = 0; i < 14; i++)
1896                         txpower[i] = TXPOWER_FROM_DEV(txpower[i]);
1897
1898                 spec->tx_power_a = txpower;
1899         }
1900 }
1901
1902 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
1903 {
1904         int retval;
1905
1906         /*
1907          * Allocate eeprom data.
1908          */
1909         retval = rt73usb_validate_eeprom(rt2x00dev);
1910         if (retval)
1911                 return retval;
1912
1913         retval = rt73usb_init_eeprom(rt2x00dev);
1914         if (retval)
1915                 return retval;
1916
1917         /*
1918          * Initialize hw specifications.
1919          */
1920         rt73usb_probe_hw_mode(rt2x00dev);
1921
1922         /*
1923          * This device requires firmware.
1924          */
1925         __set_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags);
1926         __set_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags);
1927
1928         /*
1929          * Set the rssi offset.
1930          */
1931         rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
1932
1933         return 0;
1934 }
1935
1936 /*
1937  * IEEE80211 stack callback functions.
1938  */
1939 static int rt73usb_set_retry_limit(struct ieee80211_hw *hw,
1940                                    u32 short_retry, u32 long_retry)
1941 {
1942         struct rt2x00_dev *rt2x00dev = hw->priv;
1943         u32 reg;
1944
1945         rt73usb_register_read(rt2x00dev, TXRX_CSR4, &reg);
1946         rt2x00_set_field32(&reg, TXRX_CSR4_LONG_RETRY_LIMIT, long_retry);
1947         rt2x00_set_field32(&reg, TXRX_CSR4_SHORT_RETRY_LIMIT, short_retry);
1948         rt73usb_register_write(rt2x00dev, TXRX_CSR4, reg);
1949
1950         return 0;
1951 }
1952
1953 #if 0
1954 /*
1955  * Mac80211 demands get_tsf must be atomic.
1956  * This is not possible for rt73usb since all register access
1957  * functions require sleeping. Untill mac80211 no longer needs
1958  * get_tsf to be atomic, this function should be disabled.
1959  */
1960 static u64 rt73usb_get_tsf(struct ieee80211_hw *hw)
1961 {
1962         struct rt2x00_dev *rt2x00dev = hw->priv;
1963         u64 tsf;
1964         u32 reg;
1965
1966         rt73usb_register_read(rt2x00dev, TXRX_CSR13, &reg);
1967         tsf = (u64) rt2x00_get_field32(reg, TXRX_CSR13_HIGH_TSFTIMER) << 32;
1968         rt73usb_register_read(rt2x00dev, TXRX_CSR12, &reg);
1969         tsf |= rt2x00_get_field32(reg, TXRX_CSR12_LOW_TSFTIMER);
1970
1971         return tsf;
1972 }
1973 #else
1974 #define rt73usb_get_tsf NULL
1975 #endif
1976
1977 static int rt73usb_beacon_update(struct ieee80211_hw *hw, struct sk_buff *skb,
1978                                  struct ieee80211_tx_control *control)
1979 {
1980         struct rt2x00_dev *rt2x00dev = hw->priv;
1981         struct rt2x00_intf *intf = vif_to_intf(control->vif);
1982         struct skb_frame_desc *skbdesc;
1983         unsigned int beacon_base;
1984         unsigned int timeout;
1985         u32 reg;
1986
1987         if (unlikely(!intf->beacon))
1988                 return -ENOBUFS;
1989
1990         /*
1991          * Add the descriptor in front of the skb.
1992          */
1993         skb_push(skb, intf->beacon->queue->desc_size);
1994         memset(skb->data, 0, intf->beacon->queue->desc_size);
1995
1996         /*
1997          * Fill in skb descriptor
1998          */
1999         skbdesc = get_skb_frame_desc(skb);
2000         memset(skbdesc, 0, sizeof(*skbdesc));
2001         skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
2002         skbdesc->data = skb->data + intf->beacon->queue->desc_size;
2003         skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
2004         skbdesc->desc = skb->data;
2005         skbdesc->desc_len = intf->beacon->queue->desc_size;
2006         skbdesc->entry = intf->beacon;
2007
2008         /*
2009          * Disable beaconing while we are reloading the beacon data,
2010          * otherwise we might be sending out invalid data.
2011          */
2012         rt73usb_register_read(rt2x00dev, TXRX_CSR9, &reg);
2013         rt2x00_set_field32(&reg, TXRX_CSR9_TSF_TICKING, 0);
2014         rt2x00_set_field32(&reg, TXRX_CSR9_TBTT_ENABLE, 0);
2015         rt2x00_set_field32(&reg, TXRX_CSR9_BEACON_GEN, 0);
2016         rt73usb_register_write(rt2x00dev, TXRX_CSR9, reg);
2017
2018         /*
2019          * mac80211 doesn't provide the control->queue variable
2020          * for beacons. Set our own queue identification so
2021          * it can be used during descriptor initialization.
2022          */
2023         control->queue = RT2X00_BCN_QUEUE_BEACON;
2024         rt2x00lib_write_tx_desc(rt2x00dev, skb, control);
2025
2026         /*
2027          * Write entire beacon with descriptor to register,
2028          * and kick the beacon generator.
2029          */
2030         beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
2031         timeout = REGISTER_TIMEOUT * (skb->len / sizeof(u32));
2032         rt2x00usb_vendor_request(rt2x00dev, USB_MULTI_WRITE,
2033                                  USB_VENDOR_REQUEST_OUT, beacon_base, 0,
2034                                  skb->data, skb->len, timeout);
2035         rt73usb_kick_tx_queue(rt2x00dev, control->queue);
2036
2037         return 0;
2038 }
2039
2040 static const struct ieee80211_ops rt73usb_mac80211_ops = {
2041         .tx                     = rt2x00mac_tx,
2042         .start                  = rt2x00mac_start,
2043         .stop                   = rt2x00mac_stop,
2044         .add_interface          = rt2x00mac_add_interface,
2045         .remove_interface       = rt2x00mac_remove_interface,
2046         .config                 = rt2x00mac_config,
2047         .config_interface       = rt2x00mac_config_interface,
2048         .configure_filter       = rt2x00mac_configure_filter,
2049         .get_stats              = rt2x00mac_get_stats,
2050         .set_retry_limit        = rt73usb_set_retry_limit,
2051         .bss_info_changed       = rt2x00mac_bss_info_changed,
2052         .conf_tx                = rt2x00mac_conf_tx,
2053         .get_tx_stats           = rt2x00mac_get_tx_stats,
2054         .get_tsf                = rt73usb_get_tsf,
2055         .beacon_update          = rt73usb_beacon_update,
2056 };
2057
2058 static const struct rt2x00lib_ops rt73usb_rt2x00_ops = {
2059         .probe_hw               = rt73usb_probe_hw,
2060         .get_firmware_name      = rt73usb_get_firmware_name,
2061         .get_firmware_crc       = rt73usb_get_firmware_crc,
2062         .load_firmware          = rt73usb_load_firmware,
2063         .initialize             = rt2x00usb_initialize,
2064         .uninitialize           = rt2x00usb_uninitialize,
2065         .init_rxentry           = rt2x00usb_init_rxentry,
2066         .init_txentry           = rt2x00usb_init_txentry,
2067         .set_device_state       = rt73usb_set_device_state,
2068         .link_stats             = rt73usb_link_stats,
2069         .reset_tuner            = rt73usb_reset_tuner,
2070         .link_tuner             = rt73usb_link_tuner,
2071         .write_tx_desc          = rt73usb_write_tx_desc,
2072         .write_tx_data          = rt2x00usb_write_tx_data,
2073         .get_tx_data_len        = rt73usb_get_tx_data_len,
2074         .kick_tx_queue          = rt73usb_kick_tx_queue,
2075         .fill_rxdone            = rt73usb_fill_rxdone,
2076         .config_filter          = rt73usb_config_filter,
2077         .config_intf            = rt73usb_config_intf,
2078         .config_erp             = rt73usb_config_erp,
2079         .config                 = rt73usb_config,
2080 };
2081
2082 static const struct data_queue_desc rt73usb_queue_rx = {
2083         .entry_num              = RX_ENTRIES,
2084         .data_size              = DATA_FRAME_SIZE,
2085         .desc_size              = RXD_DESC_SIZE,
2086         .priv_size              = sizeof(struct queue_entry_priv_usb_rx),
2087 };
2088
2089 static const struct data_queue_desc rt73usb_queue_tx = {
2090         .entry_num              = TX_ENTRIES,
2091         .data_size              = DATA_FRAME_SIZE,
2092         .desc_size              = TXD_DESC_SIZE,
2093         .priv_size              = sizeof(struct queue_entry_priv_usb_tx),
2094 };
2095
2096 static const struct data_queue_desc rt73usb_queue_bcn = {
2097         .entry_num              = 4 * BEACON_ENTRIES,
2098         .data_size              = MGMT_FRAME_SIZE,
2099         .desc_size              = TXINFO_SIZE,
2100         .priv_size              = sizeof(struct queue_entry_priv_usb_tx),
2101 };
2102
2103 static const struct rt2x00_ops rt73usb_ops = {
2104         .name           = KBUILD_MODNAME,
2105         .max_sta_intf   = 1,
2106         .max_ap_intf    = 4,
2107         .eeprom_size    = EEPROM_SIZE,
2108         .rf_size        = RF_SIZE,
2109         .rx             = &rt73usb_queue_rx,
2110         .tx             = &rt73usb_queue_tx,
2111         .bcn            = &rt73usb_queue_bcn,
2112         .lib            = &rt73usb_rt2x00_ops,
2113         .hw             = &rt73usb_mac80211_ops,
2114 #ifdef CONFIG_RT2X00_LIB_DEBUGFS
2115         .debugfs        = &rt73usb_rt2x00debug,
2116 #endif /* CONFIG_RT2X00_LIB_DEBUGFS */
2117 };
2118
2119 /*
2120  * rt73usb module information.
2121  */
2122 static struct usb_device_id rt73usb_device_table[] = {
2123         /* AboCom */
2124         { USB_DEVICE(0x07b8, 0xb21d), USB_DEVICE_DATA(&rt73usb_ops) },
2125         /* Askey */
2126         { USB_DEVICE(0x1690, 0x0722), USB_DEVICE_DATA(&rt73usb_ops) },
2127         /* ASUS */
2128         { USB_DEVICE(0x0b05, 0x1723), USB_DEVICE_DATA(&rt73usb_ops) },
2129         { USB_DEVICE(0x0b05, 0x1724), USB_DEVICE_DATA(&rt73usb_ops) },
2130         /* Belkin */
2131         { USB_DEVICE(0x050d, 0x7050), USB_DEVICE_DATA(&rt73usb_ops) },
2132         { USB_DEVICE(0x050d, 0x705a), USB_DEVICE_DATA(&rt73usb_ops) },
2133         { USB_DEVICE(0x050d, 0x905b), USB_DEVICE_DATA(&rt73usb_ops) },
2134         { USB_DEVICE(0x050d, 0x905c), USB_DEVICE_DATA(&rt73usb_ops) },
2135         /* Billionton */
2136         { USB_DEVICE(0x1631, 0xc019), USB_DEVICE_DATA(&rt73usb_ops) },
2137         /* Buffalo */
2138         { USB_DEVICE(0x0411, 0x00f4), USB_DEVICE_DATA(&rt73usb_ops) },
2139         /* CNet */
2140         { USB_DEVICE(0x1371, 0x9022), USB_DEVICE_DATA(&rt73usb_ops) },
2141         { USB_DEVICE(0x1371, 0x9032), USB_DEVICE_DATA(&rt73usb_ops) },
2142         /* Conceptronic */
2143         { USB_DEVICE(0x14b2, 0x3c22), USB_DEVICE_DATA(&rt73usb_ops) },
2144         /* Corega */
2145         { USB_DEVICE(0x07aa, 0x002e), USB_DEVICE_DATA(&rt73usb_ops) },
2146         /* D-Link */
2147         { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) },
2148         { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) },
2149         { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) },
2150         { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) },
2151         /* Gemtek */
2152         { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) },
2153         /* Gigabyte */
2154         { USB_DEVICE(0x1044, 0x8008), USB_DEVICE_DATA(&rt73usb_ops) },
2155         { USB_DEVICE(0x1044, 0x800a), USB_DEVICE_DATA(&rt73usb_ops) },
2156         /* Huawei-3Com */
2157         { USB_DEVICE(0x1472, 0x0009), USB_DEVICE_DATA(&rt73usb_ops) },
2158         /* Hercules */
2159         { USB_DEVICE(0x06f8, 0xe010), USB_DEVICE_DATA(&rt73usb_ops) },
2160         { USB_DEVICE(0x06f8, 0xe020), USB_DEVICE_DATA(&rt73usb_ops) },
2161         /* Linksys */
2162         { USB_DEVICE(0x13b1, 0x0020), USB_DEVICE_DATA(&rt73usb_ops) },
2163         { USB_DEVICE(0x13b1, 0x0023), USB_DEVICE_DATA(&rt73usb_ops) },
2164         /* MSI */
2165         { USB_DEVICE(0x0db0, 0x6877), USB_DEVICE_DATA(&rt73usb_ops) },
2166         { USB_DEVICE(0x0db0, 0x6874), USB_DEVICE_DATA(&rt73usb_ops) },
2167         { USB_DEVICE(0x0db0, 0xa861), USB_DEVICE_DATA(&rt73usb_ops) },
2168         { USB_DEVICE(0x0db0, 0xa874), USB_DEVICE_DATA(&rt73usb_ops) },
2169         /* Ralink */
2170         { USB_DEVICE(0x148f, 0x2573), USB_DEVICE_DATA(&rt73usb_ops) },
2171         { USB_DEVICE(0x148f, 0x2671), USB_DEVICE_DATA(&rt73usb_ops) },
2172         /* Qcom */
2173         { USB_DEVICE(0x18e8, 0x6196), USB_DEVICE_DATA(&rt73usb_ops) },
2174         { USB_DEVICE(0x18e8, 0x6229), USB_DEVICE_DATA(&rt73usb_ops) },
2175         { USB_DEVICE(0x18e8, 0x6238), USB_DEVICE_DATA(&rt73usb_ops) },
2176         /* Senao */
2177         { USB_DEVICE(0x1740, 0x7100), USB_DEVICE_DATA(&rt73usb_ops) },
2178         /* Sitecom */
2179         { USB_DEVICE(0x0df6, 0x9712), USB_DEVICE_DATA(&rt73usb_ops) },
2180         { USB_DEVICE(0x0df6, 0x90ac), USB_DEVICE_DATA(&rt73usb_ops) },
2181         /* Surecom */
2182         { USB_DEVICE(0x0769, 0x31f3), USB_DEVICE_DATA(&rt73usb_ops) },
2183         /* Planex */
2184         { USB_DEVICE(0x2019, 0xab01), USB_DEVICE_DATA(&rt73usb_ops) },
2185         { USB_DEVICE(0x2019, 0xab50), USB_DEVICE_DATA(&rt73usb_ops) },
2186         { 0, }
2187 };
2188
2189 MODULE_AUTHOR(DRV_PROJECT);
2190 MODULE_VERSION(DRV_VERSION);
2191 MODULE_DESCRIPTION("Ralink RT73 USB Wireless LAN driver.");
2192 MODULE_SUPPORTED_DEVICE("Ralink RT2571W & RT2671 USB chipset based cards");
2193 MODULE_DEVICE_TABLE(usb, rt73usb_device_table);
2194 MODULE_FIRMWARE(FIRMWARE_RT2571);
2195 MODULE_LICENSE("GPL");
2196
2197 static struct usb_driver rt73usb_driver = {
2198         .name           = KBUILD_MODNAME,
2199         .id_table       = rt73usb_device_table,
2200         .probe          = rt2x00usb_probe,
2201         .disconnect     = rt2x00usb_disconnect,
2202         .suspend        = rt2x00usb_suspend,
2203         .resume         = rt2x00usb_resume,
2204 };
2205
2206 static int __init rt73usb_init(void)
2207 {
2208         return usb_register(&rt73usb_driver);
2209 }
2210
2211 static void __exit rt73usb_exit(void)
2212 {
2213         usb_deregister(&rt73usb_driver);
2214 }
2215
2216 module_init(rt73usb_init);
2217 module_exit(rt73usb_exit);