2 * Copyright (C) 2002 Intersil Americas Inc.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License
8 * This program is distributed in the hope that it will be useful,
9 * but WITHOUT ANY WARRANTY; without even the implied warranty of
10 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
11 * GNU General Public License for more details.
13 * You should have received a copy of the GNU General Public License
14 * along with this program; if not, write to the Free Software
15 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
23 #include <asm/byteorder.h>
25 #define ISL38XX_CB_RX_QSIZE 8
26 #define ISL38XX_CB_TX_QSIZE 32
28 /* ISL38XX Access Point Specific definitions */
29 #define ISL38XX_MAX_WDS_LINKS 8
31 /* ISL38xx Client Specific definitions */
32 #define ISL38XX_PSM_ACTIVE_STATE 0
33 #define ISL38XX_PSM_POWERSAVE_STATE 1
35 /* ISL38XX Host Interface Definitions */
36 #define ISL38XX_PCI_MEM_SIZE 0x02000
37 #define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
38 #define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
39 #define ISL38XX_WRITEIO_DELAY 10 /* in us */
40 #define ISL38XX_RESET_DELAY 50 /* in ms */
41 #define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
42 #define ISL38XX_MAX_WAIT_CYCLES 10
45 #define ISL38XX_HARDWARE_REG 0x0000
46 #define ISL38XX_CARDBUS_CIS 0x0800
47 #define ISL38XX_DIRECT_MEM_WIN 0x1000
49 /* Hardware registers */
50 #define ISL38XX_DEV_INT_REG 0x0000
51 #define ISL38XX_INT_IDENT_REG 0x0010
52 #define ISL38XX_INT_ACK_REG 0x0014
53 #define ISL38XX_INT_EN_REG 0x0018
54 #define ISL38XX_GEN_PURP_COM_REG_1 0x0020
55 #define ISL38XX_GEN_PURP_COM_REG_2 0x0024
56 #define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
57 #define ISL38XX_DIR_MEM_BASE_REG 0x0030
58 #define ISL38XX_CTRL_STAT_REG 0x0078
60 /* High end mobos queue up pci writes, the following
61 * is used to "read" from after a write to force flush */
62 #define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
65 * isl38xx_w32_flush - PCI iomem write helper
66 * @base: (host) memory base address of the device
67 * @val: 32bit value (host order) to write
68 * @offset: byte offset into @base to write value to
70 * This helper takes care of writing a 32bit datum to the
71 * specified offset into the device's pci memory space, and making sure
72 * the pci memory buffers get flushed by performing one harmless read
73 * from the %ISL38XX_PCI_POSTING_FLUSH offset.
76 isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
78 writel(val, base + offset);
79 (void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
82 /* Device Interrupt register bits */
83 #define ISL38XX_DEV_INT_RESET 0x0001
84 #define ISL38XX_DEV_INT_UPDATE 0x0002
85 #define ISL38XX_DEV_INT_WAKEUP 0x0008
86 #define ISL38XX_DEV_INT_SLEEP 0x0010
88 /* Interrupt Identification/Acknowledge/Enable register bits */
89 #define ISL38XX_INT_IDENT_UPDATE 0x0002
90 #define ISL38XX_INT_IDENT_INIT 0x0004
91 #define ISL38XX_INT_IDENT_WAKEUP 0x0008
92 #define ISL38XX_INT_IDENT_SLEEP 0x0010
93 #define ISL38XX_INT_SOURCES 0x001E
95 /* Control/Status register bits */
96 /* Looks like there are other meaningful bits
97 0x20004400 seen in normal operation,
98 0x200044db at 'timeout waiting for mgmt response'
100 #define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
101 #define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
102 #define ISL38XX_CTRL_STAT_RESET 0x10000000
103 #define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
104 #define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
105 #define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
107 /* Control Block definitions */
108 #define ISL38XX_CB_RX_DATA_LQ 0
109 #define ISL38XX_CB_TX_DATA_LQ 1
110 #define ISL38XX_CB_RX_DATA_HQ 2
111 #define ISL38XX_CB_TX_DATA_HQ 3
112 #define ISL38XX_CB_RX_MGMTQ 4
113 #define ISL38XX_CB_TX_MGMTQ 5
114 #define ISL38XX_CB_QCOUNT 6
115 #define ISL38XX_CB_MGMT_QSIZE 4
116 #define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */
118 /* Memory Manager definitions */
119 #define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
120 #define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
121 #define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */
122 #define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
123 #define CONTROL_BLOCK_SIZE 1024 /* should be enough */
124 #define PSM_FRAME_SIZE 1536
125 #define PSM_MINIMAL_STATION_COUNT 64
126 #define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
127 #define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
128 #define MAX_TRAP_RX_QUEUE 4
129 #define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
131 /* Fragment package definitions */
132 #define FRAGMENT_FLAG_MF 0x0001
133 #define MAX_FRAGMENT_SIZE 1536
135 /* In monitor mode frames have a header. I don't know exactly how big those
136 * frame can be but I've never seen any frame bigger than 1584... :
138 #define MAX_FRAGMENT_SIZE_RX 1600
141 __le32 address; /* physical address on host */
142 __le16 size; /* packet size */
143 __le16 flags; /* set of bit-wise flags */
147 __le32 driver_curr_frag[ISL38XX_CB_QCOUNT];
148 __le32 device_curr_frag[ISL38XX_CB_QCOUNT];
149 isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
150 isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
151 isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
152 isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
153 isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
154 isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
157 typedef struct isl38xx_cb isl38xx_control_block;
159 /* determine number of entries currently in queue */
160 int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
162 void isl38xx_disable_interrupts(void __iomem *);
163 void isl38xx_enable_common_interrupts(void __iomem *);
165 void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
167 void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
168 void isl38xx_trigger_device(int, void __iomem *);
169 void isl38xx_interface_reset(void __iomem *, dma_addr_t);
171 #endif /* _ISL_38XX_H */