1 #ifndef _M68KNOMMU_SYSTEM_H
2 #define _M68KNOMMU_SYSTEM_H
4 #include <linux/linkage.h>
5 #include <asm/segment.h>
9 * switch_to(n) should switch tasks to task ptr, first checking that
10 * ptr isn't the current task, in which case it does nothing. This
11 * also clears the TS-flag if the task we switched to has used the
12 * math co-processor latest.
15 * switch_to() saves the extra registers, that are not saved
16 * automatically by SAVE_SWITCH_STACK in resume(), ie. d0-d5 and
17 * a0-a1. Some of these are used by schedule() and its predecessors
18 * and so we might get see unexpected behaviors when a task returns
19 * with unexpected register values.
21 * syscall stores these registers itself and none of them are used
22 * by syscall after the function in the syscall has been called.
24 * Beware that resume now expects *next to be in d1 and the offset of
25 * tss to be in a1. This saves a few instructions as we no longer have
26 * to push them onto the stack and read them back right after.
28 * 02/17/96 - Jes Sorensen (jds@kom.auc.dk)
30 * Changed 96/09/19 by Andreas Schwab
31 * pass prev in a0, next in a1, offset of tss in d1, and whether
32 * the mm structures are shared in d2 (to avoid atc flushing).
34 asmlinkage void resume(void);
35 #define switch_to(prev,next,last) \
38 __asm__ __volatile__( \
39 "movel %1, %%a0\n\t" \
40 "movel %2, %%a1\n\t" \
42 "movel %%d1, %0\n\t" \
44 : "d" (prev), "d" (next) \
45 : "cc", "d0", "d1", "d2", "d3", "d4", "d5", "a0", "a1"); \
49 #ifdef CONFIG_COLDFIRE
50 #define local_irq_enable() __asm__ __volatile__ ( \
51 "move %/sr,%%d0\n\t" \
52 "andi.l #0xf8ff,%%d0\n\t" \
56 : "cc", "%d0", "memory")
57 #define local_irq_disable() __asm__ __volatile__ ( \
58 "move %/sr,%%d0\n\t" \
59 "ori.l #0x0700,%%d0\n\t" \
63 : "cc", "%d0", "memory")
64 /* For spinlocks etc */
65 #define local_irq_save(x) __asm__ __volatile__ ( \
67 "movew #0x0700,%%d0\n\t" \
72 : "cc", "%d0", "memory")
75 /* portable version */ /* FIXME - see entry.h*/
76 #define ALLOWINT 0xf8ff
78 #define local_irq_enable() asm volatile ("andiw %0,%%sr": : "i" (ALLOWINT) : "memory")
79 #define local_irq_disable() asm volatile ("oriw #0x0700,%%sr": : : "memory")
82 #define local_save_flags(x) asm volatile ("movew %%sr,%0":"=d" (x) : : "memory")
83 #define local_irq_restore(x) asm volatile ("movew %0,%%sr": :"d" (x) : "memory")
85 /* For spinlocks etc */
86 #ifndef local_irq_save
87 #define local_irq_save(x) do { local_save_flags(x); local_irq_disable(); } while (0)
90 #define irqs_disabled() \
92 unsigned long flags; \
93 local_save_flags(flags); \
94 ((flags & 0x0700) == 0x0700); \
97 #define iret() __asm__ __volatile__ ("rte": : :"memory", "sp", "cc")
100 * Force strict CPU ordering.
101 * Not really required on m68k...
103 #define nop() asm volatile ("nop"::)
104 #define mb() asm volatile ("" : : :"memory")
105 #define rmb() asm volatile ("" : : :"memory")
106 #define wmb() asm volatile ("" : : :"memory")
107 #define set_mb(var, value) ({ (var) = (value); wmb(); })
110 #define smp_mb() mb()
111 #define smp_rmb() rmb()
112 #define smp_wmb() wmb()
113 #define smp_read_barrier_depends() read_barrier_depends()
115 #define smp_mb() barrier()
116 #define smp_rmb() barrier()
117 #define smp_wmb() barrier()
118 #define smp_read_barrier_depends() do { } while(0)
121 #define read_barrier_depends() ((void)0)
123 #define xchg(ptr,x) ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
125 struct __xchg_dummy { unsigned long a[100]; };
126 #define __xg(x) ((volatile struct __xchg_dummy *)(x))
128 #ifndef CONFIG_RMW_INSNS
129 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
131 unsigned long tmp, flags;
133 local_irq_save(flags);
140 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
146 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
152 : "=&d" (tmp) : "d" (x), "m" (*__xg(ptr)) : "memory");
155 local_irq_restore(flags);
159 static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int size)
168 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
176 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
184 : "=&d" (x) : "d" (x), "m" (*__xg(ptr)) : "memory");
191 #include <asm-generic/cmpxchg-local.h>
194 * cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
197 #define cmpxchg_local(ptr, o, n) \
198 ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\
199 (unsigned long)(n), sizeof(*(ptr))))
200 #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
203 #include <asm-generic/cmpxchg.h>
206 #if defined( CONFIG_M68328 ) || defined( CONFIG_M68EZ328 ) || \
207 defined (CONFIG_M68360) || defined( CONFIG_M68VZ328 )
208 #define HARD_RESET_NOW() ({ \
209 local_irq_disable(); \
211 moveal #0x10c00000, %a0; \
212 moveb #0, 0xFFFFF300; \
213 moveal 0(%a0), %sp; \
214 moveal 4(%a0), %a0; \
220 #ifdef CONFIG_COLDFIRE
221 #if defined(CONFIG_M5272) && defined(CONFIG_NETtel)
223 * Need to account for broken early mask of 5272 silicon. So don't
224 * jump through the original start address. Jump strait into the
225 * known start of the FLASH code.
227 #define HARD_RESET_NOW() ({ \
229 movew #0x2700, %sr; \
233 #elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \
234 defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA)
235 #define HARD_RESET_NOW() ({ \
237 movew #0x2700, %sr; \
238 moveal #0x10000044, %a0; \
239 movel #0xffffffff, (%a0); \
240 moveal #0x10000001, %a0; \
241 moveb #0x00, (%a0); \
242 moveal #0xf0000004, %a0; \
247 #elif defined(CONFIG_M5272)
249 * Retrieve the boot address in flash using CSBR0 and CSOR0
250 * find the reset vector at flash_address + 4 (e.g. 0x400)
251 * remap it in the flash's current location (e.g. 0xf0000400)
254 #define HARD_RESET_NOW() ({ \
256 movew #0x2700, %%sr; \
257 move.l %0+0x40,%%d0; \
258 and.l %0+0x44,%%d0; \
259 andi.l #0xfffff000,%%d0; \
265 : "o" (*(char *)MCF_MBAR) ); \
267 #elif defined(CONFIG_M528x)
269 * The MCF528x has a bit (SOFTRST) in memory (Reset Control Register RCR),
270 * that when set, resets the MCF528x.
272 #define HARD_RESET_NOW() \
274 unsigned char volatile *reset; \
275 asm("move.w #0x2700, %sr"); \
276 reset = ((volatile unsigned char *)(MCF_IPSBAR + 0x110000)); \
278 *reset |= (0x01 << 7);\
280 #elif defined(CONFIG_M523x)
281 #define HARD_RESET_NOW() ({ \
283 movew #0x2700, %sr; \
284 movel #0x01000000, %sp; \
285 moveal #0x40110000, %a0; \
286 moveb #0x80, (%a0); \
289 #elif defined(CONFIG_M520x)
291 * The MCF5208 has a bit (SOFTRST) in memory (Reset Control Register
292 * RCR), that when set, resets the MCF5208.
294 #define HARD_RESET_NOW() \
296 unsigned char volatile *reset; \
297 asm("move.w #0x2700, %sr"); \
298 reset = ((volatile unsigned char *)(MCF_IPSBAR + 0xA0000)); \
303 #define HARD_RESET_NOW() ({ \
305 movew #0x2700, %sr; \
313 #define arch_align_stack(x) (x)
316 static inline int irqs_disabled_flags(unsigned long flags)
324 #endif /* _M68KNOMMU_SYSTEM_H */