1 #ifndef _ASM_POWERPC_EXCEPTION_H
2 #define _ASM_POWERPC_EXCEPTION_H
4 * Extracted from head_64.S
7 * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
9 * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
10 * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
11 * Adapted for Power Macintosh by Paul Mackerras.
12 * Low-level exception handlers and MMU support
13 * rewritten by Paul Mackerras.
14 * Copyright (C) 1996 Paul Mackerras.
16 * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and
17 * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com
19 * This file contains the low-level support and setup for the
20 * PowerPC-64 platform, including trap and interrupt dispatch.
22 * This program is free software; you can redistribute it and/or
23 * modify it under the terms of the GNU General Public License
24 * as published by the Free Software Foundation; either version
25 * 2 of the License, or (at your option) any later version.
28 * The following macros define the code that appears as
29 * the prologue to each of the exception handlers. They
30 * are split into two parts to allow a single kernel binary
31 * to be used for pSeries and iSeries.
33 * We make as much of the exception code common between native
34 * exception handlers (including pSeries LPAR) and iSeries LPAR
35 * implementations as possible.
51 * We're short on space and time in the exception prolog, so we can't
52 * use the normal SET_REG_IMMEDIATE macro. Normally we just need the
53 * low halfword of the address, but for Kdump we need the whole low
56 #define LOAD_HANDLER(reg, label) \
57 addi reg,reg,(label)-_stext; /* virt addr of handler ... */
59 #define EXCEPTION_PROLOG_1(area) \
60 mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
61 std r9,area+EX_R9(r13); /* save r9 - r12 */ \
62 std r10,area+EX_R10(r13); \
63 std r11,area+EX_R11(r13); \
64 std r12,area+EX_R12(r13); \
65 mfspr r9,SPRN_SPRG1; \
66 std r9,area+EX_R13(r13); \
69 #define EXCEPTION_PROLOG_PSERIES(area, label) \
70 EXCEPTION_PROLOG_1(area); \
71 ld r12,PACAKBASE(r13); /* get high part of &label */ \
72 ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
73 mfspr r11,SPRN_SRR0; /* save SRR0 */ \
74 LOAD_HANDLER(r12,label) \
75 mtspr SPRN_SRR0,r12; \
76 mfspr r12,SPRN_SRR1; /* and SRR1 */ \
77 mtspr SPRN_SRR1,r10; \
79 b . /* prevent speculative execution */
82 * The common exception prolog is used for all except a few exceptions
83 * such as a segment miss on a kernel address. We have to be prepared
84 * to take another exception from the point where we first touch the
85 * kernel stack onwards.
87 * On entry r13 points to the paca, r9-r13 are saved in the paca,
88 * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
89 * SRR1, and relocation is on.
91 #define EXCEPTION_PROLOG_COMMON(n, area) \
92 andi. r10,r12,MSR_PR; /* See if coming from user */ \
93 mr r10,r1; /* Save r1 */ \
94 subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
96 ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
97 1: cmpdi cr1,r1,0; /* check if r1 is in userspace */ \
98 bge- cr1,2f; /* abort if it is */ \
100 2: li r1,(n); /* will be reloaded later */ \
101 sth r1,PACA_TRAP_SAVE(r13); \
103 3: std r9,_CCR(r1); /* save CR in stackframe */ \
104 std r11,_NIP(r1); /* save SRR0 in stackframe */ \
105 std r12,_MSR(r1); /* save SRR1 in stackframe */ \
106 std r10,0(r1); /* make stack chain pointer */ \
107 std r0,GPR0(r1); /* save r0 in stackframe */ \
108 std r10,GPR1(r1); /* save r1 in stackframe */ \
109 ACCOUNT_CPU_USER_ENTRY(r9, r10); \
110 std r2,GPR2(r1); /* save r2 in stackframe */ \
111 SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
112 SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
113 ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
114 ld r10,area+EX_R10(r13); \
117 ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
118 ld r10,area+EX_R12(r13); \
119 ld r11,area+EX_R13(r13); \
123 ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
124 mflr r9; /* save LR in stackframe */ \
126 mfctr r10; /* save CTR in stackframe */ \
128 lbz r10,PACASOFTIRQEN(r13); \
129 mfspr r11,SPRN_XER; /* save XER in stackframe */ \
133 std r9,_TRAP(r1); /* set trap number */ \
135 ld r11,exception_marker@toc(r2); \
136 std r10,RESULT(r1); /* clear regs->result */ \
137 std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
142 #define STD_EXCEPTION_PSERIES(n, label) \
144 .globl label##_pSeries; \
147 mtspr SPRN_SPRG1,r13; /* save r13 */ \
148 EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
150 #define HSTD_EXCEPTION_PSERIES(n, label) \
152 .globl label##_pSeries; \
155 mtspr SPRN_SPRG1,r20; /* save r20 */ \
156 mfspr r20,SPRN_HSRR0; /* copy HSRR0 to SRR0 */ \
157 mtspr SPRN_SRR0,r20; \
158 mfspr r20,SPRN_HSRR1; /* copy HSRR0 to SRR0 */ \
159 mtspr SPRN_SRR1,r20; \
160 mfspr r20,SPRN_SPRG1; /* restore r20 */ \
161 mtspr SPRN_SPRG1,r13; /* save r13 */ \
162 EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common)
165 #define MASKABLE_EXCEPTION_PSERIES(n, label) \
167 .globl label##_pSeries; \
170 mtspr SPRN_SPRG1,r13; /* save r13 */ \
171 mfspr r13,SPRN_SPRG3; /* get paca address into r13 */ \
172 std r9,PACA_EXGEN+EX_R9(r13); /* save r9, r10 */ \
173 std r10,PACA_EXGEN+EX_R10(r13); \
174 lbz r10,PACASOFTIRQEN(r13); \
177 beq masked_interrupt; \
178 mfspr r10,SPRN_SPRG1; \
179 std r10,PACA_EXGEN+EX_R13(r13); \
180 std r11,PACA_EXGEN+EX_R11(r13); \
181 std r12,PACA_EXGEN+EX_R12(r13); \
182 ld r12,PACAKBASE(r13); /* get high part of &label */ \
183 ld r10,PACAKMSR(r13); /* get MSR value for kernel */ \
184 mfspr r11,SPRN_SRR0; /* save SRR0 */ \
185 LOAD_HANDLER(r12,label##_common) \
186 mtspr SPRN_SRR0,r12; \
187 mfspr r12,SPRN_SRR1; /* and SRR1 */ \
188 mtspr SPRN_SRR1,r10; \
190 b . /* prevent speculative execution */
192 #ifdef CONFIG_PPC_ISERIES
193 #define DISABLE_INTS \
195 stb r11,PACASOFTIRQEN(r13); \
196 BEGIN_FW_FTR_SECTION; \
197 stb r11,PACAHARDIRQEN(r13); \
198 END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \
199 TRACE_DISABLE_INTS; \
200 BEGIN_FW_FTR_SECTION; \
202 ori r10,r10,MSR_EE; \
204 END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
206 #define DISABLE_INTS \
208 stb r11,PACASOFTIRQEN(r13); \
209 stb r11,PACAHARDIRQEN(r13); \
211 #endif /* CONFIG_PPC_ISERIES */
213 #define ENABLE_INTS \
216 rlwimi r11,r12,0,MSR_EE; \
219 #define STD_EXCEPTION_COMMON(trap, label, hdlr) \
221 .globl label##_common; \
223 EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
226 addi r3,r1,STACK_FRAME_OVERHEAD; \
231 * Like STD_EXCEPTION_COMMON, but for exceptions that can occur
232 * in the idle task and therefore need the special idle handling.
234 #define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \
236 .globl label##_common; \
238 EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
242 addi r3,r1,STACK_FRAME_OVERHEAD; \
246 #define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \
248 .globl label##_common; \
250 EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \
254 bl .ppc64_runlatch_on; \
255 END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \
256 addi r3,r1,STACK_FRAME_OVERHEAD; \
258 b .ret_from_except_lite
261 * When the idle code in power4_idle puts the CPU into NAP mode,
262 * it has to do so in a loop, and relies on the external interrupt
263 * and decrementer interrupt entry code to get it out of the loop.
264 * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
265 * to signal that it is in the loop and needs help to get out.
267 #ifdef CONFIG_PPC_970_NAP
270 clrrdi r11,r1,THREAD_SHIFT; \
271 ld r9,TI_LOCAL_FLAGS(r11); \
272 andi. r10,r9,_TLF_NAPPING; \
273 bnel power4_fixup_nap; \
274 END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
279 #endif /* _ASM_POWERPC_EXCEPTION_H */